{ "schemaVersion": "1.0", "project": "American Radon Systems AI Knowledge Base", "phase": "phase3", "sourceIdentity": { "package": "ars-ai-knowledge-phase-3-full-5613-for-codex-2026-07-01.zip", "sourceBucket": "phase3_full_5613_ready_for_codex", "created": "2026-07-01" }, "generatedAt": "2026-07-01T00:00:00-05:00", "sourceCount": 5613, "count": 5528, "typeCounts": { "answered_qna": 4827, "draft_question": 701 }, "topics": [ { "id": "answered-family-friend-secondhand-questions-recovered", "label": "Answered Family Friend Secondhand Questions Recovered", "count": 62, "typeCounts": { "answered_qna": 62 }, "url": "/ai/knowledge/phase3/topics/answered-family-friend-secondhand-questions-recovered.json", "sourcePackagePath": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md" }, { "id": "answered-health-family-worry-questions-recovered", "label": "Answered Health Family Worry Questions Recovered", "count": 63, "typeCounts": { "answered_qna": 63 }, "url": "/ai/knowledge/phase3/topics/answered-health-family-worry-questions-recovered.json", "sourcePackagePath": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md" }, { "id": "answered-monitor-sample-answered-qas-recovered", "label": "Answered Monitor Sample Answered Qas Recovered", "count": 167, "typeCounts": { "answered_qna": 167 }, "url": "/ai/knowledge/phase3/topics/answered-monitor-sample-answered-qas-recovered.json", "sourcePackagePath": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md" }, { "id": "answered-phase-3-clean-answered-qas", "label": "Answered Phase 3 Clean Answered Qas", "count": 220, "typeCounts": { "answered_qna": 220 }, "url": "/ai/knowledge/phase3/topics/answered-phase-3-clean-answered-qas.json", "sourcePackagePath": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md" }, { "id": "draft-monitor-question-bank-recovered", "label": "Draft Monitor Question Bank Recovered", "count": 273, "typeCounts": { "draft_question": 273 }, "url": "/ai/knowledge/phase3/topics/draft-monitor-question-bank-recovered.json", "sourcePackagePath": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md" }, { "id": "draft-phase-3-clean-question-bank", "label": "Draft Phase 3 Clean Question Bank", "count": 428, "typeCounts": { "draft_question": 428 }, "url": "/ai/knowledge/phase3/topics/draft-phase-3-clean-question-bank.json", "sourcePackagePath": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md" }, { "id": "rescued-after-mitigation-monitoring", "label": "Rescued After Mitigation Monitoring", "count": 17, "typeCounts": { "answered_qna": 17 }, "url": "/ai/knowledge/phase3/topics/rescued-after-mitigation-monitoring.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md" }, { "id": "rescued-airthings-specific", "label": "Rescued Airthings Specific", "count": 4, "typeCounts": { "answered_qna": 4 }, "url": "/ai/knowledge/phase3/topics/rescued-airthings-specific.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/airthings-specific.md" }, { "id": "rescued-family-friend-secondhand-questions-recovered", "label": "Rescued Family Friend Secondhand Questions Recovered", "count": 3, "typeCounts": { "answered_qna": 3 }, "url": "/ai/knowledge/phase3/topics/rescued-family-friend-secondhand-questions-recovered.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md" }, { "id": "rescued-family-neighbor-scenarios", "label": "Rescued Family Neighbor Scenarios", "count": 13, "typeCounts": { "answered_qna": 13 }, "url": "/ai/knowledge/phase3/topics/rescued-family-neighbor-scenarios.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md" }, { "id": "rescued-health-family-worry-questions-recovered", "label": "Rescued Health Family Worry Questions Recovered", "count": 5, "typeCounts": { "answered_qna": 5 }, "url": "/ai/knowledge/phase3/topics/rescued-health-family-worry-questions-recovered.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md" }, { "id": "rescued-health-worry-general", "label": "Rescued Health Worry General", "count": 9, "typeCounts": { "answered_qna": 9 }, "url": "/ai/knowledge/phase3/topics/rescued-health-worry-general.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/health-worry-general.md" }, { "id": "rescued-illinois-specific-testing", "label": "Rescued Illinois Specific Testing", "count": 64, "typeCounts": { "answered_qna": 64 }, "url": "/ai/knowledge/phase3/topics/rescued-illinois-specific-testing.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md" }, { "id": "rescued-kids-baby-pregnancy", "label": "Rescued Kids Baby Pregnancy", "count": 7, "typeCounts": { "answered_qna": 7 }, "url": "/ai/knowledge/phase3/topics/rescued-kids-baby-pregnancy.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/kids-baby-pregnancy.md" }, { "id": "rescued-monitor-comparisons-buying", "label": "Rescued Monitor Comparisons Buying", "count": 4, "typeCounts": { "answered_qna": 4 }, "url": "/ai/knowledge/phase3/topics/rescued-monitor-comparisons-buying.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/monitor-comparisons-buying.md" }, { "id": "rescued-monitor-question-bank-recovered", "label": "Rescued Monitor Question Bank Recovered", "count": 5, "typeCounts": { "answered_qna": 5 }, "url": "/ai/knowledge/phase3/topics/rescued-monitor-question-bank-recovered.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md" }, { "id": "rescued-monitor-sample-answered-qas-recovered", "label": "Rescued Monitor Sample Answered Qas Recovered", "count": 1, "typeCounts": { "answered_qna": 1 }, "url": "/ai/knowledge/phase3/topics/rescued-monitor-sample-answered-qas-recovered.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md" }, { "id": "rescued-new-construction-rrnc", "label": "Rescued New Construction Rrnc", "count": 11, "typeCounts": { "answered_qna": 11 }, "url": "/ai/knowledge/phase3/topics/rescued-new-construction-rrnc.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/new-construction-rrnc.md" }, { "id": "rescued-oddball-rambling", "label": "Rescued Oddball Rambling", "count": 5, "typeCounts": { "answered_qna": 5 }, "url": "/ai/knowledge/phase3/topics/rescued-oddball-rambling.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/oddball-rambling.md" }, { "id": "rescued-phase-3-clean-answered-qas", "label": "Rescued Phase 3 Clean Answered Qas", "count": 6, "typeCounts": { "answered_qna": 6 }, "url": "/ai/knowledge/phase3/topics/rescued-phase-3-clean-answered-qas.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md" }, { "id": "rescued-phase-3-clean-question-bank", "label": "Rescued Phase 3 Clean Question Bank", "count": 4, "typeCounts": { "answered_qna": 4 }, "url": "/ai/knowledge/phase3/topics/rescued-phase-3-clean-question-bank.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md" }, { "id": "rescued-placement-crawlspace-slab-apartment", "label": "Rescued Placement Crawlspace Slab Apartment", "count": 8, "typeCounts": { "answered_qna": 8 }, "url": "/ai/knowledge/phase3/topics/rescued-placement-crawlspace-slab-apartment.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/placement-crawlspace-slab-apartment.md" }, { "id": "rescued-radoneye-ecosense-safetysiren", "label": "Rescued Radoneye Ecosense Safetysiren", "count": 6, "typeCounts": { "answered_qna": 6 }, "url": "/ai/knowledge/phase3/topics/rescued-radoneye-ecosense-safetysiren.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/radoneye-ecosense-safetysiren.md" }, { "id": "rescued-readings-spikes-interpretation", "label": "Rescued Readings Spikes Interpretation", "count": 4, "typeCounts": { "answered_qna": 4 }, "url": "/ai/knowledge/phase3/topics/rescued-readings-spikes-interpretation.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/readings-spikes-interpretation.md" }, { "id": "rescued-real-estate-buyer", "label": "Rescued Real Estate Buyer", "count": 67, "typeCounts": { "answered_qna": 67 }, "url": "/ai/knowledge/phase3/topics/rescued-real-estate-buyer.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md" }, { "id": "rescued-real-estate-seller-landlord", "label": "Rescued Real Estate Seller Landlord", "count": 63, "typeCounts": { "answered_qna": 63 }, "url": "/ai/knowledge/phase3/topics/rescued-real-estate-seller-landlord.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md" }, { "id": "rescued-seasonal-weather-environmental", "label": "Rescued Seasonal Weather Environmental", "count": 5, "typeCounts": { "answered_qna": 5 }, "url": "/ai/knowledge/phase3/topics/rescued-seasonal-weather-environmental.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/seasonal-weather-environmental.md" }, { "id": "rescued-tenant-renter-college", "label": "Rescued Tenant Renter College", "count": 25, "typeCounts": { "answered_qna": 25 }, "url": "/ai/knowledge/phase3/topics/rescued-tenant-renter-college.json", "sourcePackagePath": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md" }, { "id": "workflow-after-mitigation-monitoring", "label": "Workflow After Mitigation Monitoring", "count": 256, "typeCounts": { "answered_qna": 256 }, "url": "/ai/knowledge/phase3/topics/workflow-after-mitigation-monitoring.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md" }, { "id": "workflow-airthings-specific", "label": "Workflow Airthings Specific", "count": 282, "typeCounts": { "answered_qna": 282 }, "url": "/ai/knowledge/phase3/topics/workflow-airthings-specific.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md" }, { "id": "workflow-family-neighbor-scenarios", "label": "Workflow Family Neighbor Scenarios", "count": 268, "typeCounts": { "answered_qna": 268 }, "url": "/ai/knowledge/phase3/topics/workflow-family-neighbor-scenarios.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md" }, { "id": "workflow-health-worry-general", "label": "Workflow Health Worry General", "count": 261, "typeCounts": { "answered_qna": 261 }, "url": "/ai/knowledge/phase3/topics/workflow-health-worry-general.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md" }, { "id": "workflow-illinois-specific-testing", "label": "Workflow Illinois Specific Testing", "count": 187, "typeCounts": { "answered_qna": 187 }, "url": "/ai/knowledge/phase3/topics/workflow-illinois-specific-testing.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md" }, { "id": "workflow-kids-baby-pregnancy", "label": "Workflow Kids Baby Pregnancy", "count": 257, "typeCounts": { "answered_qna": 257 }, "url": "/ai/knowledge/phase3/topics/workflow-kids-baby-pregnancy.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md" }, { "id": "workflow-monitor-comparisons-buying", "label": "Workflow Monitor Comparisons Buying", "count": 257, "typeCounts": { "answered_qna": 257 }, "url": "/ai/knowledge/phase3/topics/workflow-monitor-comparisons-buying.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md" }, { "id": "workflow-new-construction-rrnc", "label": "Workflow New Construction Rrnc", "count": 260, "typeCounts": { "answered_qna": 260 }, "url": "/ai/knowledge/phase3/topics/workflow-new-construction-rrnc.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md" }, { "id": "workflow-oddball-rambling", "label": "Workflow Oddball Rambling", "count": 249, "typeCounts": { "answered_qna": 249 }, "url": "/ai/knowledge/phase3/topics/workflow-oddball-rambling.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md" }, { "id": "workflow-placement-crawlspace-slab-apartment", "label": "Workflow Placement Crawlspace Slab Apartment", "count": 272, "typeCounts": { "answered_qna": 272 }, "url": "/ai/knowledge/phase3/topics/workflow-placement-crawlspace-slab-apartment.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md" }, { "id": "workflow-radoneye-ecosense-safetysiren", "label": "Workflow Radoneye Ecosense Safetysiren", "count": 265, "typeCounts": { "answered_qna": 265 }, "url": "/ai/knowledge/phase3/topics/workflow-radoneye-ecosense-safetysiren.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md" }, { "id": "workflow-readings-spikes-interpretation", "label": "Workflow Readings Spikes Interpretation", "count": 268, "typeCounts": { "answered_qna": 268 }, "url": "/ai/knowledge/phase3/topics/workflow-readings-spikes-interpretation.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md" }, { "id": "workflow-real-estate-buyer", "label": "Workflow Real Estate Buyer", "count": 210, "typeCounts": { "answered_qna": 210 }, "url": "/ai/knowledge/phase3/topics/workflow-real-estate-buyer.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md" }, { "id": "workflow-real-estate-seller-landlord", "label": "Workflow Real Estate Seller Landlord", "count": 195, "typeCounts": { "answered_qna": 195 }, "url": "/ai/knowledge/phase3/topics/workflow-real-estate-seller-landlord.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md" }, { "id": "workflow-seasonal-weather-environmental", "label": "Workflow Seasonal Weather Environmental", "count": 257, "typeCounts": { "answered_qna": 257 }, "url": "/ai/knowledge/phase3/topics/workflow-seasonal-weather-environmental.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md" }, { "id": "workflow-tenant-renter-college", "label": "Workflow Tenant Renter College", "count": 235, "typeCounts": { "answered_qna": 235 }, "url": "/ai/knowledge/phase3/topics/workflow-tenant-renter-college.json", "sourcePackagePath": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md" } ], "items": [ { "id": "p3-workflow-after-mitigation-monitoring-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Post-Mitigation Testing Timing", "question": "How soon can I test after mitigation?", "answer": "Most contractors recommend waiting at least 24 hours after the system is turned on before starting a post-mitigation test. The reason is the system needs a little time to depressurize the soil and let things stabilize. A 48-hour short-term test or a 90-day long-term test will both give you a valid baseline, and many pros prefer the longer test because it captures more variation. Don't try to test the same day the fan gets switched on - you won't get a meaningful number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Post-Mitigation Testing Timing", "question": "My contractor just left and the fan is on. Can I start my test kit tonight?", "answer": "Give it at least 24 hours before you crack open that test kit. The system is still pulling equilibrium in the soil underneath your slab or crawl space. Starting a test too soon can give you an artificially low reading that doesn't represent steady-state conditions - or in some edge cases, a temporarily elevated one. Wait a full day, then start the test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Post-Mitigation Testing Timing", "question": "How long should I wait before doing my post-mitigation radon test?", "answer": "The EPA says at least 24 hours after installation before starting a short-term test. In practice, waiting 48 hours gives you a little more confidence you're seeing a stabilized reading. If you're doing a long-term test (90 days or more), you can start it within a day or two of installation - the longer window averages out any early fluctuations anyway.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Post-Mitigation Testing Timing", "question": "My mitigation system went in last week. My contractor said to test but didn't say when to open the test kit. Is now okay?", "answer": "If it's been at least 24 hours since the fan started running, you're fine to open the test kit. The longer you wait from installation day, the more stable the reading will be. A week out is actually a comfortable window - go ahead and start your test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Post-Mitigation Testing Timing", "question": "What happens if I test too early after mitigation? Will the results be wrong?", "answer": "Testing within the first few hours can give you a number that doesn't reflect how the system actually performs long-term. The sub-slab pressure field is still evening out. Results from a test started very early might read lower or higher than what the system will actually deliver over time. Most labs will still process the test - they just won't flag it - so the number becomes your baseline even if it's a bit off. Waiting 24-48 hours is the safest bet.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Post-Mitigation Testing Timing", "question": "My mitigation company said they'd come back for a follow-up test in 30 days. But it's been 60 days and I haven't heard from them. Who does the post-mitigation test?", "answer": "The post-mitigation test can be done by the same contractor or by a separate testing company - it depends on the state and what you agreed to. Some contractors do follow-up testing themselves, others hand it off or expect you to hire someone independently. In Illinois, the post-mitigation test is supposed to be conducted independently of the contractor who did the installation. Either way, if 60 days have passed with no follow-up, it's worth making a call to figure out who's responsible for scheduling it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Post-Mitigation Testing Timing", "question": "Is a 48-hour short-term test after mitigation good enough or should I do a longer test?", "answer": "A 48-hour short-term test gives you a quick answer, and it's what most people do first. But short-term tests capture a narrow window, and radon fluctuates by season, weather, and how the house is used. A 90-day long-term test after mitigation gives you a much more reliable picture of what you're actually living with. If the short-term test comes back well below 2.0 pCi/L, many people feel comfortable and leave it there. If it's higher or borderline, doing a long-term test is worth the effort.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Post-Mitigation Testing Timing", "question": "My radon dropped from 6.0 to 0.8 pCi/L in 48 hours after the fan was turned on. Is that real?", "answer": "Yes, that's real and it's actually a pretty common pattern. A well-installed sub-slab depressurization system can pull radon levels down dramatically in the first 24-48 hours. Going from 6.0 to under 1.0 in that window isn't unusual when the suction point hits a well-connected aggregate layer under the slab. The system is doing exactly what it's supposed to. Even so, run a proper post-mitigation test to confirm the number holds over time - a 48-hour snapshot is encouraging but a full test locks it in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Post-Mitigation Testing Timing", "question": "Should I close windows and doors while doing my post-mitigation test?", "answer": "For a valid closed-house short-term test, yes - keep windows and exterior doors closed as much as possible, except for normal entry and exit. This is the standard protocol for short-term testing. It's not meant to make the house airtight like a vault, just to avoid conditions that would artificially pull outdoor air in and dilute the reading. Long-term tests are generally done under normal living conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Post-Mitigation Testing Timing", "question": "My mitigation was done in December. I tested and got 1.8 pCi/L. My neighbor says winter tests always run higher. Should I retest in summer?", "answer": "Your neighbor is right that radon tends to run a little higher in winter - closed houses, stack effect, frozen ground - but 1.8 pCi/L is well below the EPA action level even accounting for seasonal variation. If your pre-mitigation level was significantly higher, that result says your system is working. You could retest in summer if you want a second data point, but 1.8 in winter is genuinely a good result and not a cause for concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Post-Mitigation Testing Timing", "question": "I got mitigation installed but never got a post-mitigation test. What should I do?", "answer": "Get one done now, even if it's been a year or two since installation. A post-mitigation test is the only way to confirm the system is actually working. You can order a mail-in test kit, use a certified testing company, or reach out to whoever did your installation. Better to do it late than not at all - you'll sleep better knowing the number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Post-Mitigation Testing Timing", "question": "My post-mitigation test kit sat on my counter for a week before I opened it. Does that ruin the results?", "answer": "Unopened test kits are generally fine sitting on a shelf for a while - the charcoal inside is sealed. Once you open it, the 48-96 hour exposure clock starts. So if the kit was sealed and you just haven't deployed it yet, you're fine. Just open it and place it in the lowest livable level of the home now. If it was already open and sitting out, that's a different story - you'd want a fresh kit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "My post-mitigation test came back at 2.1 pCi/L. Is that a success?", "answer": "Yes. The EPA action level is 4.0 pCi/L, and anything below that is a significant improvement if you were over it before. 2.1 pCi/L is a solid result - it's well into a range most people feel comfortable with. The EPA does note that levels between 2.0 and 4.0 pCi/L carry some risk, so it's worth keeping an eye on it over time. But as a post-mitigation result, 2.1 is a real win.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "My post-mitigation test came back at 4.0 pCi/L exactly. Is the system a failure?", "answer": "Not necessarily a failure, but it's a result worth paying attention to. The EPA recommends fixing when levels are at or above 4.0 pCi/L, so landing exactly at 4.0 means you're right at that threshold. A single test result can vary a bit based on conditions that week, so I'd recommend doing a second test or a long-term test to get more data. It's also worth having the contractor re-evaluate the system - there may be room to improve suction or address a gap in coverage.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "My radon is still 3.8 after mitigation. Is the system working?", "answer": "The system is probably working - 3.8 is below the EPA action level of 4.0 - but it's not a result to just accept and move on from. The EPA says levels between 2 and 4 pCi/L are worth considering further action on because the risk is real, just lower. If your pre-mitigation level was 8 or 12 pCi/L, then getting to 3.8 is meaningful progress. But there may be room to optimize - a second suction point, a higher-capacity fan, sealing cracks - that could bring it down further. A follow-up conversation with whoever did the installation is worth having.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "My pre-mitigation radon was 12 pCi/L and my post-mitigation test shows 3.2. Is that good enough?", "answer": "Getting from 12 down to 3.2 is a massive reduction and the system is clearly working. Whether 3.2 is \"good enough\" is a personal decision - you've eliminated the majority of the risk. The EPA says 2.0-4.0 is a range worth continuing to think about. Some people stop there; others ask their contractor if there's a way to squeeze it down to 1-2 pCi/L. Either choice is reasonable. The important thing is you didn't stay at 12.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "My post-mitigation test came back at 1.4 pCi/L. How do I know that's not just the outdoor air level?", "answer": "Outdoor air averages around 0.4 pCi/L nationally, so 1.4 indoors is above that, but it's a very low level for indoor radon and generally considered a great result post-mitigation. Your system is very likely responsible for keeping it that low. You don't need to try to subtract out outdoor radon - just take the 1.4 as your indoor reading. It's a good number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "My neighbor's mitigation brought them to 0.4 pCi/L but mine only went to 2.2. Is something wrong with my system?", "answer": "Not necessarily. Every house is different - soil composition, slab type, foundation cracks, aggregate depth, and where the suction point was placed all affect final results. 2.2 pCi/L is a solid post-mitigation result. Your neighbor getting to 0.4 is great for them, but it doesn't mean your system is underperforming. If you were above 4.0 before and you're at 2.2 now, the system is doing its job. If you want to chase a lower number, it's worth talking to your contractor about whether there's a way to improve it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "How do I know if my post-mitigation result is real or if the test kit was compromised somehow?", "answer": "Reputable labs do quality control checks on every batch of test kits, and a blank or clearly anomalous kit gets flagged. Even so, test kits can be affected if they're placed near high airflow (directly next to a vent or fan), exposed to extreme humidity, or if the test cap was missing during the exposure period. If your result seems wildly inconsistent with what your consumer monitor shows or what you expected, running a second test is cheap and a reasonable sanity check.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "What counts as a successful post-mitigation test result?", "answer": "The EPA benchmark is below 4.0 pCi/L, and ideally as close to the outdoor average of 0.4 as reasonably achievable. In practice, most contractors and homeowners consider a result below 2.0 pCi/L a clear success. Below 4.0 is the minimum goal. Between 2.0 and 4.0 is improved but may be worth additional steps. Anything that brought a previously high level down significantly while staying below 4.0 represents a system that's working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "My post-mitigation test said 2.8. My contractor said \"that's great\" but I feel uneasy. Should I be?", "answer": "Your unease is understandable - 2.8 is below the EPA action level but it's not zero. Your contractor is right that it's a solid result. The EPA does acknowledge that any radon level above the outdoor average carries some risk, and levels between 2.0 and 4.0 are in a zone where continued attention makes sense. Retesting in a year, keeping the fan running, and not letting the system go unmonitored are all smart moves. 2.8 post-mitigation isn't alarming, but staying aware is the right instinct.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "I did two post-mitigation tests at the same time in the same room and got 1.9 and 2.6. Which one is right?", "answer": "Both are probably right - or more accurately, both are measuring different moments in time, and radon fluctuates. Consumer-grade test kits have some margin of variability, and even lab-processed charcoal canisters have a testing range. The average of 1.9 and 2.6 is about 2.25, which is what I'd use as your working number. The fact that both are well below 4.0 pCi/L is the key takeaway.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "My post-mitigation result came back at 0.9 pCi/L. I feel like that's too good to be true. Can I trust it?", "answer": "It's not too good to be true - results below 1.0 pCi/L are genuinely achievable after mitigation, especially in houses with good sub-slab aggregate and a well-placed suction point. Near-outdoor levels are the target, and 0.9 pCi/L is right in that zone. Trust the result, especially if it came from an accredited lab. Cross-check it against your consumer monitor if you have one, and if they're roughly consistent, you've got your answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "My radon has been 1.0 pCi/L for 3 years since mitigation. Is an annual test necessary?", "answer": "At 1.0 pCi/L with three years of consistent readings, you've got good data on your side. The EPA recommends retesting every two years when a system is installed, so you're actually ahead of schedule. Annual testing at that level is optional - it's not going to hurt, but many people in your situation test every other year and that's reasonable. The main thing is keeping the fan running and not letting years go by without any check at all.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "My mitigation system has been running for 5 years. When should I retest?", "answer": "If you haven't tested in the past two years, now is a good time. The EPA recommends retesting every two years when a mitigation system is in place. Fans can wear down over time, soil conditions can shift, and new cracks can develop in a foundation. A fresh test every couple of years tells you the system is still delivering. A long-term test is ideal, but a short-term test gives you a current snapshot if you want a faster answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "I've been testing every year since mitigation and the results always come back around 1.5. Can I slow down how often I test?", "answer": "At consistently 1.5 pCi/L over multiple years, you have strong evidence your system is performing well. The EPA's guidance for homes with mitigation systems is to retest every two years. You could reasonably move to that schedule. If your monitor goes below what it had been or something changes in the house - renovation, new addition, foundation crack - bump the testing back up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Reading Your Numbers After Mitigation", "question": "My radon went from 8.4 before mitigation to 1.7 after. My wife wants to test every 6 months. Is that overkill?", "answer": "It's not overkill from a safety standpoint - more data is always informative. But from a practical standpoint, if you consistently come back at 1.7 or lower, every six months gives you confidence without adding a lot of new information. The EPA says every two years for a system in good repair. If it makes your wife feel better to test more often, there's no harm in it. A continuous consumer monitor might actually be more useful than frequent lab tests - it shows you daily trends without the per-test cost.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Consumer Monitors After Mitigation", "question": "My Airthings dropped immediately after mitigation. Do I still need a professional post-mitigation test?", "answer": "Yes, you still want a professional test. Your Airthings is a continuous consumer monitor and it's great for real-time trending, but it hasn't been calibrated to a national standard the way a lab-processed charcoal canister or electret has. A certified post-mitigation test is your official documentation that the system works - it's what lenders, buyers, and state programs often require. Use the Airthings to watch the trend; use the certified test as your record.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Consumer Monitors After Mitigation", "question": "My Airthings shows 1.2 pCi/L after mitigation. Should I be confident it worked?", "answer": "1.2 pCi/L on an Airthings is a very encouraging sign. Consumer monitors are useful for tracking trends and getting a daily read on your home's radon level. The caveat is that these devices can read a bit higher or lower than a certified test under some conditions. If you want confidence you can put in a file and show a future buyer, run a certified test alongside it. But 1.2 on the Airthings? The system is almost certainly working well.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Consumer Monitors After Mitigation", "question": "My radon fan is on but the consumer monitor shows 3.5 pCi/L. Should I call someone?", "answer": "Yes, that's worth following up on. 3.5 pCi/L is below the EPA action level of 4.0, but it's higher than you'd want to see after a mitigation system has been running for a while. A few things could be going on: the suction point may not be reaching all the soil under your slab, there may be a pathway the system isn't addressing, or the monitor may need to be moved (away from vents, corners, or areas with high airflow). Give the contractor a call and share the numbers. It may be a simple fix or an adjustment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Consumer Monitors After Mitigation", "question": "Can I rely on my continuous radon monitor instead of doing periodic lab tests?", "answer": "Consumer monitors give you valuable ongoing data, and they're better than nothing between formal tests. But they're not a substitute for periodic certified testing. Monitors can drift over time, react to humidity or temperature differently, and aren't held to the same calibration standards as lab tests. Use the monitor to watch for trends and get early warning of problems; use certified tests every two years to confirm the system is still delivering.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Consumer Monitors After Mitigation", "question": "My Airthings is reading 0.5 pCi/L post-mitigation. Is it even accurate at that level?", "answer": "Consumer monitors at the low end of their range have more relative variability - at 0.5 pCi/L, you're close to the background detection floor for many devices. The reading is probably approximately right, but don't put too much precision on the exact decimal. What it's telling you is that your radon is low - near outdoor levels. That's the signal that matters. A certified test would confirm it with better precision if you want documentation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Consumer Monitors After Mitigation", "question": "How long does my Airthings or RadonEye take to stabilize after I move it to a new location or after mitigation?", "answer": "Most continuous monitors need 24-72 hours to produce a reliable reading after being moved or after significant changes in the environment. The first few hours after placing a monitor in a new spot (or after a mitigation fan kicks on) can show fluctuating numbers as the device samples air that's still changing. Wait at least 24 hours before reading the number as meaningful, and 48-72 hours before drawing conclusions about whether mitigation is working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Consumer Monitors After Mitigation", "question": "My continuous monitor shows radon spiking every night and dropping during the day after mitigation. Is the system failing?", "answer": "Not necessarily failing - diurnal variation in radon is normal. Radon tends to be higher at night and in early morning because the house is closed up, there's less air exchange, and temperature differences across the slab can affect soil gas movement. A mitigation system reduces overall levels but doesn't eliminate the daily pattern. What matters is whether the average is staying well below 4.0 pCi/L. If the nighttime spikes are pushing above 4.0 consistently, that's worth a look.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Consumer Monitors After Mitigation", "question": "My Airthings shows 2.5 and my lab test came back at 1.7. Which one should I believe?", "answer": "Both are probably capturing something real - they're just measuring different time windows under different conditions. Lab tests average what happened over 48-96 hours under the specific conditions of that test. Your Airthings is giving you a rolling average that includes more variation. A difference of 0.8 pCi/L between the two isn't alarming - it's within the expected range of variability. Take both numbers as useful data points rather than trying to pick a winner.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Consumer Monitors After Mitigation", "question": "I have a RadonEye and an Airthings in the same room and they're reading differently. Which one do I trust after mitigation?", "answer": "Consumer monitors from different brands often read differently from each other - that's a known quirk of the category. Neither one has been calibrated to a reference standard in the field. The more useful thing to look at is whether both are trending in the same direction - if both came down after mitigation was installed, the system is working regardless of which number is \"right.\" If they're diverging over time, one of them may be drifting. A certified test tells you what the actual level is.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Consumer Monitors After Mitigation", "question": "My Airthings app shows a color chart and mine is showing green after mitigation. Is green \"safe\"?", "answer": "Airthings uses a green/yellow/red color coding that roughly corresponds to below 2.0 / 2.0-4.0 / above 4.0 pCi/L. Green means you're below 2.0 on their scale, which is a solid result. The word \"safe\" is tricky with radon - any level carries some small risk - but green on the Airthings post-mitigation is the outcome you're looking for. Keep the fan running and retest with a certified lab every couple of years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Consumer Monitors After Mitigation", "question": "My Airthings keeps giving me hourly readings of 0.0 pCi/L after mitigation. Is it broken?", "answer": "At very low radon levels, some consumer monitors hit their detection floor and display 0.0 or rounds down. It doesn't necessarily mean the monitor is broken - it may just mean the radon in your home is so low the device can't measure it with confidence. That's actually a good sign post-mitigation. If you're concerned about the monitor's function, move it to an unmitigated basement or area for a few days and see if it picks up a reading there. If it reads zero everywhere including before mitigation was done, then yes, it may need a reset or replacement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Consumer Monitors After Mitigation", "question": "Should I move my Airthings after mitigation is installed, or leave it in the same spot I used it before?", "answer": "Keep it in the lowest livable level of the home - the same general placement guideline applies before and after mitigation. Keeping it in the same spot lets you make a direct before-and-after comparison, which is the most useful data. Don't place it right next to the suction pipe, the floor, or directly under a vent - those locations can give artificially skewed readings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "The Manometer and System Indicators", "question": "What is the manometer gauge on my radon system?", "answer": "The manometer is a simple pressure gauge - usually a U-shaped tube with colored fluid inside - mounted on the pipe of your radon mitigation system. It tells you at a glance whether the fan is creating suction under your slab or in your crawl space. When the fan is running and pulling a pressure differential, the fluid shifts to one side of the tube. It's a visual indicator you can check without any tools or testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "The Manometer and System Indicators", "question": "How do I read the U-tube manometer on my radon system?", "answer": "Look at the two columns of fluid in the U-tube. When the system is working correctly, the fluid will be higher on one side than the other - the side connected to the suction pipe (the lower-pressure side) will show a higher fluid column because the fan is pulling a vacuum. The amount of difference tells you the rough pressure differential the system is maintaining. Fluid displaced about an inch or more on one side is a normal operating sign. Fluid sitting perfectly level means no pressure differential - the fan may not be running.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "The Manometer and System Indicators", "question": "The fluid in my manometer looks level. Is my fan on?", "answer": "If the fluid in both sides of the U-tube is sitting at the same level, that usually means there's no pressure differential being created - which suggests the fan may not be on, or it's not pulling effective suction. First, check that the fan is plugged in and the circuit breaker hasn't tripped. If the power is confirmed on and the fluid is still level, the fan may have failed or there may be a break in the pipe. This is worth investigating before you assume the system is working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "The Manometer and System Indicators", "question": "My manometer shows no movement. Does that mean the system isn't working?", "answer": "Very likely yes. The manometer is designed to show you that the fan is pulling a pressure differential through the suction pipe. No movement - fluid sitting level - means either the fan isn't running or there's a break or obstruction in the system that's preventing suction from reaching the gauge. Check your electrical first. If the fan sounds like it's running but the fluid is flat, there could be a problem with the pipe connection or the suction point. Worth a call to your contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "The Manometer and System Indicators", "question": "My manometer fluid is all in one side of the tube. Is that normal or does it mean something is wrong?", "answer": "Fluid displaced heavily to one side can actually mean the system is pulling very strong suction - or in some cases it means the tube lost fluid or isn't reading correctly. A small-to-moderate displacement (roughly half an inch to an inch or two) is normal operating range. If one column is completely empty and all fluid has gone to the other side, the tube may have lost calibration or the fan is creating more suction than expected. If everything looks and sounds normal otherwise, a strong displacement is generally fine - just check that the tube still has fluid in both sides.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "The Manometer and System Indicators", "question": "What color is the fluid in a manometer supposed to be?", "answer": "Most manometers come with red, blue, or clear colored fluid. The color itself doesn't have functional meaning - it's just to make it easier to see the fluid level. Different manufacturers use different colors. If the fluid appears discolored compared to what it looked like when installed, or if it's evaporated significantly, you may want to have it refilled or replaced. Some contractors use colored dye drops in water; others use a proprietary fluid.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "The Manometer and System Indicators", "question": "My manometer fluid is dropping. Does that mean I'm losing suction?", "answer": "If the fluid level is actually decreasing over time - both sides getting lower - it may be slowly evaporating. Some manometer fluids will evaporate gradually, especially in warm or dry environments. This doesn't mean your suction is dropping; it means the fluid level itself is getting low, which will eventually make the gauge inaccurate. Most contractors can top it off easily. If the fluid shifts to one side it's suction; if both sides drop equally over months, it's evaporation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "The Manometer and System Indicators", "question": "Someone told me to look at the manometer every month. Is that really necessary?", "answer": "A monthly glance takes about five seconds and can tell you whether your fan is still running - which makes it worth doing. You don't need to take measurements or log anything. Just look and see if the fluid is still displaced from center. If something has changed - fluid suddenly level, fluid gone, tube cracked - you want to know sooner rather than later. It's the cheapest form of system monitoring there is.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "The Manometer and System Indicators", "question": "The indicator light on my radon fan is red. What does that mean?", "answer": "Some radon fans include an indicator light or alarm - red typically means a problem, often that the fan has failed or that suction pressure has dropped below a set threshold. Check your fan model's documentation to confirm what the red light means for your specific unit. If the light is red and the manometer fluid is level, that's a strong indicator the system isn't creating the pressure differential it should be. Worth checking the power supply and calling your contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "The Manometer and System Indicators", "question": "Is there any electronic monitor I can buy to tell me if my radon fan stops?", "answer": "Yes. There are radon system alarms designed specifically for this. Some are simple pressure switches that trigger an alarm if suction drops. Some newer fan models have built-in status lights or alerts. You can also use a smart plug with power monitoring to alert you if the fan loses power. These aren't standard on every installation, but they're worth asking about - especially if your fan is in an out-of-the-way location where you wouldn't notice a failure quickly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "My mitigation fan is making a new noise. Should I be concerned?", "answer": "A new noise from a fan that's been running quietly is worth paying attention to. Common causes include: debris pulled into the fan, bearing wear, moisture in the motor housing, or the fan mounting coming slightly loose. Some of these are cosmetic; others can lead to fan failure. If the noise is a rattle, grinding, or high-pitched hum it wasn't making before, it's a good idea to have your contractor take a look rather than waiting for it to stop running entirely.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "My radon fan is humming louder than it used to. Is that normal aging?", "answer": "Some increase in noise over years is normal as motor bearings wear. A moderate increase in hum over many years isn't a red flag on its own. But if the change in noise level happened suddenly, or if it's accompanied by vibration, rattling, or a different pitch, that's more likely a sign the fan is reaching the end of its life. Radon fans typically last 10-15+ years, but that's not a warranty, and a loud sudden change in operating sound is worth checking out.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-after-mitigation-monitoring-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "My mitigation fan stopped. How do I know when it stopped?", "answer": "Most people don't know exactly when it stopped - that's one of the arguments for having a manometer or a system alarm. If you notice the manometer fluid is level and the fan isn't audible near the pipe, it may have been off for days or longer. Check the circuit breaker and the outlet first. If power is fine but the fan isn't running, it's likely failed. If you have a continuous radon monitor, look at the historical trend data - you may be able to see exactly when radon started creeping back up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "My radon system fan stopped and I don't know how long it's been off. Should I be panicked?", "answer": "Don't panic - radon is a long-term cumulative risk, not an acute one. A fan that was off for a few days or even a week or two doesn't undo the protection you've had for years. What you want to do is get it restarted as soon as possible. Check the breaker and outlet. If the fan has failed, get it replaced. And once it's running again, consider retesting to confirm levels have come back down. You're not in danger right now - but don't leave it off.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "My radon system fan runs constantly. Is it supposed to run 24/7?", "answer": "Yes - radon mitigation fans are designed to run continuously around the clock. They're made for it. Unlike a bathroom exhaust fan or a range hood, these run all day, every day, for years. Turning it off when you're not home or at night is one of the most common mistakes people make. The system needs to maintain continuous sub-slab depressurization to keep radon from building up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "Should I turn off my radon fan when we go on vacation?", "answer": "Leave it running. The system needs to keep maintaining negative pressure under your slab the whole time you're away. Coming home to a house that's had the fan off for two weeks means radon has been accumulating and you're walking back into elevated levels. These fans use very little electricity - it's not worth the cost savings to turn one off, and the whole point is to keep the pressure differential constant.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "How loud should a radon fan be?", "answer": "Most radon fans are designed to be relatively quiet - you might hear a faint hum or gentle whoosh near the pipe, but you typically shouldn't hear it clearly from across the house or through floors. How loud it is depends on the fan model, where it's mounted, and whether it's inside or outside the conditioned space. Fans on exterior walls with the motor outside tend to be quieter inside the home. If a fan sounds loud from normal living areas, it may be mounted in a location that's transmitting vibration, or it may be a higher-CFM model needed for your foundation conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "I can hear my radon fan but I don't know if it's actually pulling air. How do I check?", "answer": "The manometer is your first check - if the fluid is displaced from center, the fan is pulling a pressure differential. You can also hold a piece of thin tissue or even a thread near the pipe interior and see if there's airflow. If you have a continuous monitor, compare current readings to what they were before installation. For a more definitive answer, a contractor can measure sub-slab pressure with a gauge to confirm the system is pulling properly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "How long do radon mitigation fans last?", "answer": "Radon mitigation fans are built to run continuously, and quality fans typically last 10-20 years - sometimes more. The most common brands used in the industry come with multi-year warranties (often 3-5 years), and many run well beyond that. But they're electrical motors and they do eventually wear out. Annual visual checks and periodic testing help you catch a failing fan before radon levels climb back up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "When should I replace my radon mitigation fan?", "answer": "Replace it when it fails, when it starts making abnormal noise that suggests bearing or motor wear, when the warranty is up and you're seeing signs of age, or when a radon test shows levels are rising despite the fan appearing to be on. Many people replace fans proactively at the 10-15 year mark even if they seem to be running - similar to replacing a smoke detector battery before it fails. Don't wait until levels have gone back up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "My radon fan warranty says 5 years. Does that mean I should replace it at 5 years?", "answer": "The warranty covers the manufacturer's commitment to the product for that period - it doesn't mean the fan will stop working at year five. Most fans run well beyond the warranty period. Think of it like a car warranty: the coverage ends at a certain point, not the working life. Even so, once you're past the warranty window, it's smart to pay closer attention to how the fan sounds and to test more regularly so you know if performance is slipping.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "My radon fan is on the outside of my house and it's been making noise in cold weather. Is that normal?", "answer": "Some noise change in very cold weather is normal - the motor seals and materials contract slightly, which can affect the sound profile. If it's a seasonal noise that settles down once temperatures moderate, it's likely not a problem. If the noise is persistent or worsening regardless of temperature, or if the manometer shows reduced suction in cold weather, it's worth a look. Some exterior fans are not rated for the extreme cold of certain northern climates, which can shorten their lifespan.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Fan Performance and Noise", "question": "After mitigation, does the fan affect my electric bill significantly?", "answer": "Radon mitigation fans are typically low-wattage - most range from about 20 to 80 watts. Running one year-round adds up to a modest amount on your electric bill - less than many other always-on devices in your home. It's a real but small ongoing cost, and it's worth it for what the fan does.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Long-Term Monitoring and Retesting", "question": "I bought a house with an existing mitigation system. How do I know it's working?", "answer": "Start with the manometer - look at whether the fluid is displaced, which tells you the fan is creating suction. Then listen for the fan near the pipe. Most importantly, do a radon test. Don't assume the system is working just because it's there. Ask for any testing records from the previous owners. If records aren't available, a fresh test gives you a current baseline for the home as you're living in it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Long-Term Monitoring and Retesting", "question": "The house I bought had mitigation done 10 years ago but no recent test. Should I retest?", "answer": "Yes - absolutely. Mitigation systems don't last forever, and a 10-year-old fan with no recent test could be running at reduced capacity or even failed. Soil conditions change, foundations shift, and fans wear out. Get a test done now. If you don't have records of the original post-mitigation test result, a current test is even more important as your baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Long-Term Monitoring and Retesting", "question": "My radon has gone up since mitigation was installed 2 years ago. What happened?", "answer": "A few things could cause this. The fan could be failing or delivering less suction than it used to. There could be new cracks or pathways in the foundation that the system isn't addressing. The suction point may have lost connection to the aggregate layer it was drawing from. Or - if you've done renovations, added rooms, or changed how the basement is used - the airflow dynamics of the house have changed. Get the system inspected and do a fresh test to see where you stand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Long-Term Monitoring and Retesting", "question": "Can radon come back after mitigation?", "answer": "Yes - radon can rise again after mitigation if the fan fails, if the system develops a leak or obstruction, if foundation conditions change, or if the suction point loses its effectiveness over time. That's why retesting every two years is the standard recommendation even with a system in place. A mitigation system is not a permanent set-and-forget solution - it needs to be monitored.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Long-Term Monitoring and Retesting", "question": "My mitigation system has been in place for 8 years and I've never retested. Is that bad?", "answer": "That's too long to go without a check. A lot can happen in 8 years - the fan may have degraded, the foundation may have settled, and the soil conditions under the slab can change. The EPA recommends retesting every two years with a system in place. Get a test done now. If you're at a good level, great - and now you have a current baseline. If levels have crept up, you'll want to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Long-Term Monitoring and Retesting", "question": "What's the difference between a long-term and a short-term radon test, and which should I use after mitigation?", "answer": "A short-term test runs 48-96 hours and gives you a quick snapshot. A long-term test runs 90 days or more and gives you a time-averaged result that captures seasonal and daily variation. For post-mitigation testing, either works, but long-term tests are often preferred because they smooth out the noise. If you want a fast answer after installation, start with a short-term test. If that looks good, a long-term test in the first 90 days gives you a stronger record.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Long-Term Monitoring and Retesting", "question": "Should I retest in the same spot I did my pre-mitigation test?", "answer": "Testing in the lowest livable area is the standard protocol before and after - so yes, the same general zone. Keeping the test location consistent makes a before-and-after comparison meaningful. Even so, if your basement setup has changed (finished now, or rooms added), aim for the spot that represents how the space is actually used.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Long-Term Monitoring and Retesting", "question": "My mitigation system has been in for 4 years and I just did my second retest. It came back at 1.6 pCi/L. Do I need to do anything?", "answer": "1.6 pCi/L at four years out is a genuinely good result. Keep the fan running, glance at the manometer occasionally, and retest every two years as the EPA recommends. You're in good shape - this is exactly what a well-functioning mitigation system looks like over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Long-Term Monitoring and Retesting", "question": "Should I test in winter or summer for the most accurate post-mitigation result?", "answer": "Either season can give you a valid result, but they'll often give you slightly different numbers. Winter testing tends to produce higher readings because of the stack effect - warm indoor air rising and pulling soil gas in through the slab. Summer testing tends to run a bit lower. If you want the most conservative (and protective) number, test in winter. If you want your best-case scenario, summer. Most experts say testing in two different seasons and averaging the results gives you the truest picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Long-Term Monitoring and Retesting", "question": "My friend says I should do a long-term test right after mitigation to avoid gaming the result. Is she right?", "answer": "She's not wrong - a long-term test right after mitigation captures the real operating average rather than an idealized snapshot under perfect test conditions. Short-term tests are done with closed windows, which doesn't represent how most people live year-round. A 90-day long-term test under normal living conditions is arguably a more honest result. If your goal is a number to live by rather than a number to check a box, she's giving good advice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Long-Term Monitoring and Retesting", "question": "How does the EPA recommend I maintain a radon mitigation system?", "answer": "EPA guidance says to have the system inspected and retested at least every two years. In practice, that means: checking the manometer visually on a regular basis, listening for changes in fan sound, and doing a certified radon test every two years. If you notice anything unusual - new noise, fluid shift on the manometer, or rising readings on a consumer monitor - address it without waiting for the two-year mark.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "When Numbers Don't Look Right After Mitigation", "question": "After mitigation, my radon spiked for a week before settling down. Is that normal?", "answer": "It's not common, but it does happen in some cases. Installing a mitigation system involves drilling into the slab or floor, which can temporarily disturb soil gas pathways and cause a short-term fluctuation. Also, if the manometer fluid was settling or the suction point was finding its pressure equilibrium, readings can be unstable the first few days. If levels settled down to a good number after a week, the spike was likely temporary and the system is now working. If they spiked and didn't come down, that's worth investigating.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "When Numbers Don't Look Right After Mitigation", "question": "My radon went down right after mitigation but then crept back up to 3.0. What gives?", "answer": "This can happen when the system has a suction point that initially pulled a good vacuum but is now losing connection with the aggregate layer - either because the suction radius is limited, because a neighboring area of the slab isn't being reached, or because the fan is weakening. 3.0 pCi/L is below the EPA action level but higher than you'd hope for post-mitigation. Get the system inspected and have the contractor check suction pressure. There may be a second suction point needed or a fan upgrade.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "When Numbers Don't Look Right After Mitigation", "question": "My radon test came back high after mitigation and the contractor says the system is working fine. Who do I believe?", "answer": "Believe the test. The radon test tells you what the air concentration is in your home - that's the actual outcome that matters. A contractor saying \"the system is working fine\" based on a visual check or pressure reading doesn't mean your indoor air level is acceptable. If the test result is above 4.0 pCi/L and the contractor isn't taking it seriously, it may be time to get a second opinion from another mitigation professional.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "When Numbers Don't Look Right After Mitigation", "question": "My mitigation system appears to be running but my professional post-test came back at 5.2. Is the system defective?", "answer": "A result of 5.2 pCi/L after mitigation means the system isn't delivering an adequate result, whether or not it appears to be running. Possible explanations: the suction point isn't connected to the primary soil gas entry pathway, there are cracks or openings the system isn't addressing, the fan doesn't have enough capacity for your foundation size, or the system was installed incorrectly. This warrants a re-evaluation by the contractor. If they can't explain and fix it, get a second contractor in to assess.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "When Numbers Don't Look Right After Mitigation", "question": "My radon keeps varying wildly on my continuous monitor since mitigation - from 0.5 to 4.0 in the same week. Is the system failing?", "answer": "Wide swings can happen for a few reasons: changes in weather and barometric pressure, the heating system cycling and creating pressure differentials, windows being opened and closed, or the system having inconsistent suction. If the average is below 2.0 pCi/L, wide swings are less alarming than if the average is near 4.0. But if you're regularly spiking above 4.0 pCi/L even briefly, that's worth investigating. Share the trend data with your contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "When Numbers Don't Look Right After Mitigation", "question": "My contractor says my radon system needs a second suction point. Is that a common thing?", "answer": "Yes, it's fairly common in larger homes or homes with complex slab configurations. A single suction point creates a pressure field that has a limited radius - in some soil and aggregate conditions, it doesn't reach the entire footprint of the slab. A second suction point extends the reach. If your post-mitigation test is higher than expected and the contractor has confirmed the fan is pulling adequate suction from the first point, a second suction point is often the next logical step.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "When Numbers Don't Look Right After Mitigation", "question": "My post-mitigation radon is higher in one part of the basement than another. Is that possible?", "answer": "Yes - radon levels can vary within a house, even after mitigation. A single suction point might depressurize soil under one part of the slab very effectively while another section is less influenced. If you're consistently measuring higher radon in a particular area, it may indicate the system needs an additional suction point in that zone. Sharing specific room-by-room readings with your contractor helps them diagnose whether the coverage is adequate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "When Numbers Don't Look Right After Mitigation", "question": "My house has two separate basement areas - finished and unfinished. My radon is low in the finished side but still high in the unfinished utility area. What's going on?", "answer": "The suction point for your mitigation system is probably pulling well under the finished side but not covering the utility section as effectively. This is a known challenge in split or segmented basements. Sometimes adding a suction point in the utility area or sealing the slab in that zone solves it. It's worth flagging to your contractor with the specific measurements from each area.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "When Numbers Don't Look Right After Mitigation", "question": "My post-mitigation test was fine but my Airthings spiked during a storm. Should I be worried?", "answer": "Radon levels often rise during storms, even in mitigated homes. Falling barometric pressure allows more soil gas to move, and closed windows during rain reduce air exchange. A storm-related spike on a continuous monitor is a real phenomenon, not a malfunction. What matters is whether levels come back down after the storm passes. If they do, your system is functioning normally. If they stay elevated, that's worth a look.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "When Numbers Don't Look Right After Mitigation", "question": "Can a mitigation system affect other things in my house - like causing negative pressure issues or drafts?", "answer": "In some cases, yes. A high-draw fan can affect house pressure, particularly in tightly built homes, which can interfere with combustion appliances like furnaces and water heaters or cause back-drafting. A well-designed installation accounts for this by confirming the suction point is in the soil, not pulling from conditioned air in the house. If you've noticed increased drafts, combustion issues, or doors that seem to want to close themselves since installation, mention it to your contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "System Longevity and Fan Replacement", "question": "My mitigation fan is 12 years old. Should I proactively replace it?", "answer": "At 12 years, you're in the range where proactive replacement makes sense, especially if it's been running continuously. Some fans last 20 years; others show wear earlier. Listen for changes in sound, check the manometer for consistent suction, and do a radon test. If all three look good, you may have more life in it. But at 12 years, you're no longer in the sweet spot where you can assume everything is fine without checking. It's also a good time to ask your contractor what model is in there and whether the manufacturer still warrants or supports it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "System Longevity and Fan Replacement", "question": "If my radon fan dies, how long do I have before radon becomes a concern?", "answer": "Radon can accumulate fairly quickly without the fan running - in some homes, levels can climb back toward pre-mitigation concentrations within days. The rate depends on your soil, foundation, and how sealed the slab is. This is another reason to have a continuous monitor - you'd see the level rising and know something changed. Don't leave a dead fan running for weeks before addressing it. Get a replacement fan on order as soon as you confirm it's failed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "System Longevity and Fan Replacement", "question": "Is it okay to replace my radon fan myself or do I need a contractor?", "answer": "Fan replacement on an existing system is a more accessible DIY task than original installation, but it requires working with electrical connections and making sure the new fan is matched to your pipe size and suction requirements. In some states, radon work requires certification. If you're comfortable with electrical work and you can source the exact same fan model or a compatible one, it may be doable. But having a licensed radon professional do it means the system gets evaluated at the same time, not just swapped.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-after-mitigation-monitoring-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "System Longevity and Fan Replacement", "question": "My neighbor replaced their radon fan and said their radon went up temporarily after the swap. Is that normal?", "answer": "Yes - any time the suction pipe is opened and the fan is disconnected, the system loses pressure for however long the swap takes. If it takes a few hours, radon may start accumulating in that window. After the new fan is installed and running, levels come back down. The temporary increase during the swap isn't a sign something went wrong - it's just the system being offline briefly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "System Longevity and Fan Replacement", "question": "What brands of radon fans are the most reliable?", "answer": "The most common brands used in the industry include RadonAway and Festa Radon Technologies (formerly known as RadonAway and Festa). Both have long track records. There are also several other manufacturers whose fans are used regularly by licensed radon professionals. Rather than picking a brand on your own, I'd go with whatever your licensed radon professional recommends for your specific setup - they'll match the CFM rating and pressure requirements to your system's needs.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-after-mitigation-monitoring-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "System Longevity and Fan Replacement", "question": "My radon fan has been running since 2009. Is it time to replace it?", "answer": "At 15+ years, it's overdue for close attention even if it seems to be running fine. Check the manometer, listen to the motor, and do a radon test. If the test result is still good and the fan sounds healthy, you may have more life in it. But I'd be planning for replacement soon rather than waiting until it fails. An unexpected failure means radon accumulates until you catch it - a proactive replacement means you control the timeline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "System Longevity and Fan Replacement", "question": "Does a mitigation system come with a warranty?", "answer": "Most reputable contractors warrant their labor for a period of time, and the fan itself typically has a manufacturer's warranty - often three to five years, sometimes longer depending on the brand. The warranty on the work (labor) and the warranty on the fan (parts) are separate. Get both in writing before the job is done. Also ask what happens if the post-mitigation test result isn't below 4.0 - a good contractor will have a policy on that.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "System Longevity and Fan Replacement", "question": "My mitigation system warranty expired. Now what?", "answer": "An expired warranty doesn't mean the system stops working - it just means the free-repair window has closed. Keep up with periodic retesting every two years, listen to the fan for changes, and keep an eye on the manometer. When the fan eventually needs replacement, you'll pay for parts and labor, which is typically much less than the original installation. The most important maintenance is the radon testing itself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "System Longevity and Fan Replacement", "question": "My contractor put in a basic fan. My neighbor's contractor put in a fancier one with an alarm. Does it matter?", "answer": "The core function is the same - both fans create sub-slab depressurization. The fancier fan with an alarm gives you a notification if the system stops working, which is a genuine advantage. If you want that feature, it can often be retrofitted - either by adding an alarm to your existing setup or replacing the fan with one that has built-in monitoring. It's not required, but it's a useful upgrade, especially if your fan is in an out-of-the-way spot.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Bought a House with Existing Mitigation", "question": "I just bought a house and the inspector said there's a radon mitigation system. What do I do first?", "answer": "Check that the fan is actually running - listen near the pipe and look at the manometer. Then ask the sellers for any testing records, ideally the original pre-mitigation test and the post-mitigation test. If those records don't exist or the most recent test is more than two years old, do a radon test yourself. You want to know what the current level is, not what it was five years ago.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Bought a House with Existing Mitigation", "question": "The sellers said the mitigation system works great. Do I have to test?", "answer": "Yes. Sellers often don't have current data - they may not have tested in years. A radon test takes a few days and costs very little compared to not knowing what you're breathing. Assume nothing until you have a test result from a certified lab. \"Works great\" is not data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Bought a House with Existing Mitigation", "question": "I bought a house with mitigation already installed. How do I know if it was installed correctly?", "answer": "Ask for the original installation documentation or a description of what was done. Key things to look for: the suction point is in the sub-slab soil (not in the living space), the pipe exits the house correctly, the fan is in a conditioned or protected space, the system has a manometer, and a post-mitigation test was done and shows results below 4.0 pCi/L. If records are missing, have a licensed radon professional inspect the system - they can evaluate whether the installation meets current standards.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-after-mitigation-monitoring-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Bought a House with Existing Mitigation", "question": "My real estate agent said the mitigation system means I don't need to test. Is that right?", "answer": "No - that's wrong. The system lowers radon; a test tells you how much. You need both. The system could be underperforming, could have a fan that's failing, or could have been incorrectly installed. A test is the only way to know what the air quality in your home actually is. Don't skip testing because a system exists.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Bought a House with Existing Mitigation", "question": "The house I bought had a mitigation system but no manometer. Should I add one?", "answer": "Yes - a manometer is an inexpensive addition that gives you a day-to-day visual indicator that the system is running. Without it, you have no way to tell at a glance if the fan is on and creating suction. Ask a state licensed radon contractor to add one to the existing pipe - it's a straightforward addition.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Bought a House with Existing Mitigation", "question": "I found radon records from the original owners showing 0.7 pCi/L post-mitigation. That was 7 years ago. Should I still retest?", "answer": "Yes. 7 years is well past the EPA's two-year retest recommendation. Fans can weaken, foundation conditions change, and the original result no longer tells you what today's level is. Do a test. You'll probably find it's still low - but you want to know, not assume.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Bought a House with Existing Mitigation", "question": "The previous owners mentioned the mitigation fan \"might need replacing soon.\" What should I do?", "answer": "Take that seriously. If they knew the fan was getting old or unreliable, get a contractor in to evaluate it now. You don't want to find out the fan failed after radon has been accumulating for months. A pre-emptive fan replacement or professional inspection is much better than discovering elevated levels after the fact.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Bought a House with Existing Mitigation", "question": "My house inspection said the radon mitigation system was functioning but the inspector didn't test radon levels. Is that enough?", "answer": "No. A home inspector can check whether the fan is running and the manometer shows movement, but that only tells you the system is on - not that it's bringing radon to an acceptable level. Radon testing is what tells you the result. Ask the inspector to be clear about what they checked versus what a radon test would tell you, and then do the test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Bought a House with Existing Mitigation", "question": "The house we bought has two separate mitigation pipes. Is that unusual?", "answer": "Not at all - some homes require two or more suction points to cover the full slab area. Larger homes, L-shaped foundations, and homes with separated zones under the slab often need multiple pipes. Both should have a fan (or one fan serving both pipes in some configurations) and both should have manometers. Check that both appear to be under suction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Bought a House with Existing Mitigation", "question": "The mitigation system in my new house goes out through the garage. Is that a good installation?", "answer": "Routing through a garage isn't ideal but it's done when other routing options aren't available. The main concern is whether the pipe exits in a location where radon can safely disperse and doesn't re-enter the house through windows, doors, or HVAC intakes. If the exhaust is near a garage door that's frequently open, or near windows on that side of the house, it's worth having a contractor evaluate the discharge location.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Documentation and Reports", "question": "My post-mitigation test was done but I lost the report. How do I get another?", "answer": "Contact the lab that processed your test - the testing company's name is usually printed on the canister or on a card included with the kit. Most labs keep records and can re-issue a copy of the results. If you don't know which lab processed it, check with the contractor who did your installation - they often keep copies. If all else fails, do a new test. Having a current result is more valuable than tracking down an old one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Documentation and Reports", "question": "Is there a central database of radon test results where I can look up my house?", "answer": "No national database exists for individual home test results. Some states have radon programs that collect data, but it's not universally accessible at the individual property level. Your results are typically held by the testing lab and possibly your state radon program if they were submitted there. Keep copies of your own test results in a folder you can find.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Documentation and Reports", "question": "I got mitigation installed but my contractor never gave me any paperwork. Is that a problem?", "answer": "Yes - you should have at least a description of what was installed, the date, and ideally a post-mitigation test result. If you don't have documentation, ask the contractor to provide it. Good documentation becomes important if you ever sell the house or need to demonstrate to a buyer that mitigation was done. If the contractor won't or can't provide it, that's a red flag about the quality of the installation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Documentation and Reports", "question": "Should I keep records of every radon test I do?", "answer": "Yes. Keep a simple file - physical or digital - with the date, testing method, result, and lab name for every test. This becomes genuinely useful when you sell the house, when a buyer asks questions, or when you need to compare current levels to historical ones. It's one of the easiest things you can do to document the safety of your home over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "State Requirements and Third-Party Testing", "question": "Does my state require a post-mitigation test?", "answer": "Requirements vary by state. Illinois requires a post-mitigation test conducted independently of the contractor. Other states have their own rules, and some states have no formal requirement at all. Contact your state's radon program to find out what's required where you live. Even if it's not required, doing an independent post-mitigation test is smart.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "State Requirements and Third-Party Testing", "question": "What does \"independently conducted\" mean for a post-mitigation test?", "answer": "It means the entity doing the testing is separate from the entity that installed the mitigation system. The contractor who put in your system has an obvious interest in showing it worked - an independent tester has no stake in the outcome. Most states that require independent testing have lists of certified measurement professionals who qualify.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "State Requirements and Third-Party Testing", "question": "Can the same company that installed my mitigation system also do my post-mitigation test?", "answer": "In some states, yes - there's no prohibition. In others, like Illinois, post-mitigation testing must be independent of the installation contractor. Even where it's allowed, there's a reasonable argument for having it done independently so you're not relying on the contractor to evaluate their own work. Ask what your state requires, and if you have the option, independent testing gives you an unbiased result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "State Requirements and Third-Party Testing", "question": "Where can I find a certified radon testing lab to process my post-mitigation test?", "answer": "Your state radon program is the best starting point - they maintain lists of certified labs and measurement professionals. The National Radon Proficiency Program (NRPP) and the National Radon Safety Board (NRSB) also maintain searchable directories of certified testers. Some states have their own certification programs separate from national ones.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "State Requirements and Third-Party Testing", "question": "My state doesn't have a mandatory post-mitigation test requirement. Should I still test?", "answer": "Absolutely. The legal requirement and the practical recommendation are different things. Not testing after mitigation is like having surgery and not doing a follow-up appointment. The test confirms the system is doing what it's supposed to do. No requirement in your state doesn't mean it's optional from a health standpoint.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Seasonal Variation and Anomalies", "question": "My radon is always higher in winter. Is my mitigation system failing in cold weather?", "answer": "Not necessarily failing - winter is when radon naturally runs higher in many homes, even with mitigation in place. The stack effect is stronger in cold weather (warm indoor air rises, pulling soil gas in through the slab), houses are closed up more, and frozen ground can affect soil gas dynamics. If winter levels are still below 4.0 pCi/L, the system is working within normal seasonal variation. If they're above 4.0 in winter, it's worth a closer look.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Seasonal Variation and Anomalies", "question": "My radon is at 0.8 in summer and around 2.2 in winter. Should I be doing something about the winter number?", "answer": "2.2 pCi/L in winter is still well below the EPA action level, so the system is doing its job even in the harder season. Seasonal variation of that magnitude is common and not a failure indicator. If you want to be extra thorough, you can test in both seasons every two years to document the range. But 2.2 in winter is a result most people are comfortable with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Seasonal Variation and Anomalies", "question": "Does the weather affect how well my mitigation system works?", "answer": "Weather does influence radon levels even in mitigated homes. Falling barometric pressure, high winds, precipitation, and very cold temperatures can temporarily increase radon entry through the slab. A good mitigation system handles most of this variation and keeps average levels low, but short-term spikes during extreme weather events are normal. What you're looking for is a low average over time - not a flat line every day.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Seasonal Variation and Anomalies", "question": "My consumer monitor shows a big spike every time it rains hard. Is my mitigation system failing?", "answer": "Weather-driven spikes on a continuous monitor are common and don't necessarily indicate system failure. Rain reduces barometric pressure, which allows soil gas to move more freely. The fan keeps running and typically brings levels back down after the storm. The key is whether levels normalize after the weather passes. If they do, the system is functioning. If radon stays elevated for days after the rain, that warrants a look.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Seasonal Variation and Anomalies", "question": "My radon is consistently higher on the lowest level of my three-story home. Should my mitigation system be handling that?", "answer": "Radon is heaviest at the lowest level - that's where it enters and where it accumulates most if undisturbed. A properly installed mitigation system should be addressing that zone directly. If the lowest level is still showing elevated levels after mitigation, the system may need a suction point in that specific area or the coverage may not be reaching it. Share the level-by-level readings with your contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Seasonal Variation and Anomalies", "question": "We had a major flood in our basement and now our radon is higher. Did the flood damage the mitigation system?", "answer": "Floods can affect mitigation systems in a few ways: water entering the suction hole can temporarily block airflow, water can damage the fan if it's located low on the pipe, and changes to the soil saturation under the slab can temporarily change how soil gas moves. After the water recedes and things dry out, the system should resume normal function. But a radon test after a significant flood event is a good idea to confirm levels have returned to normal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Seasonal Variation and Anomalies", "question": "My radon was at 1.5 for years and is now at 2.8. What changed?", "answer": "A gradual rise like that warrants investigation. Possible causes include a fan that's losing output, new cracks in the foundation that provide additional entry pathways, changes to soil conditions under the slab, or changes in how the house is used (finished basement, new HVAC). Check the manometer for suction, listen to the fan, and consider calling a contractor to evaluate. 2.8 is still below the action level, but the trend matters - you don't want it to keep climbing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Health and Risk Context After Mitigation", "question": "My family has been in the house since before we knew about the radon. Are we sick?", "answer": "Radon doesn't cause acute symptoms - it's not going to give you a headache, sore throat, or make you feel tired right now. It's a long-term lung-cancer risk from cumulative radiation exposure over years. If you have health concerns about past exposure, that's a conversation to have with your doctor. What you can control going forward is keeping levels low with a working mitigation system, and you're doing that now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Health and Risk Context After Mitigation", "question": "Now that mitigation is installed, should I stop worrying about radon?", "answer": "You don't need to obsess over it, but you shouldn't completely forget about it either. Check the manometer periodically, retest every two years, and listen for changes in the fan. Radon mitigation is more like maintaining a smoke detector than installing a one-time fix. The system is doing the work - your job is just to make sure it keeps running.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Health and Risk Context After Mitigation", "question": "My kids grew up in a house that had elevated radon before mitigation. Should I be panicked?", "answer": "Radon is a serious long-term risk, but it's important to put it in context. It takes cumulative exposure over time to meaningfully elevate lung cancer risk. One particularly relevant factor is smoking - the combination of radon and smoking dramatically increases risk more than either alone. If you're concerned about your family's prior exposure, talk to your doctor. The most important thing now is that the system is installed and working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Health and Risk Context After Mitigation", "question": "Can radon exposure cause symptoms like headaches or fatigue?", "answer": "No. Radon does not cause acute symptoms. Headaches, fatigue, sore throats, and similar symptoms are not signs of radon exposure - radon is an odorless, colorless gas that causes harm through radiation exposure to lung tissue over time. If you're experiencing those symptoms, look for other causes. Radon's risk is elevated lung cancer risk from long-term cumulative exposure, not day-to-day symptoms.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Health and Risk Context After Mitigation", "question": "My radon is at 1.8 after mitigation. Is it \"safe\" now?", "answer": "Radon doesn't have a truly \"safe\" level - even the outdoor average of 0.4 pCi/L involves some small radiation exposure. But 1.8 pCi/L is a low level, well below the EPA action threshold, and the mitigation system has clearly done significant work if you were above 4.0 before. The risk at 1.8 is meaningfully lower than at higher levels. Keep the system running and retest periodically. You've done the right things.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Health and Risk Context After Mitigation", "question": "My doctor asked if we have a radon mitigation system. Should I show her the test results?", "answer": "Yes - that's exactly the kind of information that helps a doctor understand your household's radiation exposure history. Showing pre- and post-mitigation test results lets her assess exposure context. Bring copies if you have them.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Contractor and Service Questions", "question": "What should I ask a contractor when I'm getting a post-mitigation system check?", "answer": "Ask them to: measure current sub-slab pressure at the suction point, check for any pipe leaks or disconnections, evaluate the fan for signs of wear, confirm the manometer is reading correctly, and review your most recent test result in context of what the system is capable of. A good contractor will document what they find and give you a clear picture of whether the system needs any changes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Contractor and Service Questions", "question": "My mitigation contractor said my post-mitigation result of 3.0 is \"as low as we can get it.\" Should I accept that?", "answer": "3.0 pCi/L is below the EPA action level, but \"as low as we can get it\" should come with an explanation - not just an assertion. A contractor who says that should be able to tell you why: limited aggregate under the slab, impermeable soil, multiple entry pathways that can't be fully sealed. Ask for specifics. If the explanation makes sense and you've verified the suction is being correctly delivered, then 3.0 may genuinely be the realistic target. If you're not satisfied with the explanation, a second opinion is reasonable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Contractor and Service Questions", "question": "Should I use the same contractor for post-mitigation testing that installed my system?", "answer": "In some states this isn't allowed - the test must be independent. Even where it is allowed, there's a practical argument for independence: an unconnected tester has no interest in whether the result looks good for the contractor. If you're in a state without independence requirements, it's your call. Either way, make sure the test is conducted by a certified measurement professional using a NRPP or NRSB-accredited method.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Contractor and Service Questions", "question": "My radon contractor told me I didn't need a post-mitigation test because they \"could tell by the suction.\" Is that right?", "answer": "No. Suction pressure at the pipe tells you the fan is pulling - it doesn't tell you what radon concentration is in your living space. You need a radon test to know whether the system reduced levels below the threshold. Any contractor who discourages you from post-mitigation testing is giving you bad advice, regardless of their confidence in the installation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Contractor and Service Questions", "question": "I want to add a second radon suction point myself. Is that something a homeowner can do?", "answer": "Drilling into the slab, locating aggregate, and tapping into the existing pipe system requires some knowledge and the right tools. It's not as simple as adding a second vent. In many states, radon mitigation work requires certification, so doing it yourself could be non-compliant. If you're a capable DIYer with concrete experience, it's technically possible, but getting a licensed radon professional to do it ensures correct placement and system integrity - and a professional installation can be documented for future buyers.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-after-mitigation-monitoring-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Contractor and Service Questions", "question": "My contractor offered a \"lifetime warranty\" on the mitigation. What does that actually mean?", "answer": "Read the fine print carefully. Most \"lifetime warranty terms\" in this industry cover the contractor's labor if the system fails to keep levels below a specified threshold - often 4.0 pCi/L - under normal operating conditions. They typically don't cover fan replacement costs, don't transfer to new homeowners, and have conditions that must be met (like not altering the system). A warranty is a good sign of a contractor's confidence, but understand what's actually covered before you rely on it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-after-mitigation-monitoring-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Contractor and Service Questions", "question": "How often should a professional inspect my radon mitigation system?", "answer": "A professional inspection every few years is reasonable, especially as the system ages past 10 years. In between inspections, the visual manometer check and periodic radon testing do most of the monitoring work. If you notice the fan sound changing, the manometer shifting, or radon levels creeping up on your consumer monitor, don't wait for a scheduled inspection - call sooner.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My post-mitigation test was done in a room I never use. Does the location matter?", "answer": "Test results should reflect the lowest livable area of the home, regardless of how often you use that space. If you have a rarely-used basement, that's still where the test should go - it represents the worst-case area the system needs to address. If the contractor or tester placed the test kit in a main living area on an upper floor, you might be getting a lower reading that doesn't reflect the whole picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My radon system is in the crawl space. Is the monitoring process any different?", "answer": "The core approach is the same - do a post-mitigation radon test in the lowest livable space, check that the system is running, and retest periodically. Crawl space systems often involve sealing the crawl space with a liner and running the fan to pull air from under the liner. The manometer check is the same. One difference is that access to the fan may be less convenient, so inspections can be harder. A continuous monitor in the living space above the crawl helps with ongoing awareness.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My mitigation pipe goes up through my living room and then out the roof. Can I paint it to match the wall?", "answer": "Yes - the pipe itself (usually PVC) can be painted with appropriate paint. Make sure the fan housing is not covered or insulated in a way that traps heat around the motor, and don't block the exhaust at the top. Paint the pipe, not the fan unit, and you should be fine aesthetically.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My house was mitigated before I moved in. Should I get a new test even if the result from the seller was 1.2 pCi/L?", "answer": "Yes - even if the seller's test was recent and showed 1.2 pCi/L, doing your own test establishes your baseline as the new homeowner. You can verify the system is still delivering the same result under your occupancy patterns. It also gives you documentation in your own name. A 1.2 result from the previous owner is reassuring, but your own test closes the loop.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "Is it possible the soil under my house ran out of radon after all these years of mitigation?", "answer": "No. Radon is continuously produced as uranium in soil and rock decays - it's not a finite pool being depleted by your mitigation system. The source of radon is the geology under and around your home, which doesn't run out on a human timescale. Your mitigation system is continuously drawing radon away before it can accumulate indoors - not emptying a tank.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My radon result has been 0.5 pCi/L for three straight tests over five years. Can I consider the problem solved?", "answer": "The mitigation system has clearly been very effective, and 0.5 pCi/L is close to outdoor background levels. \"Solved\" is a reasonable way to think about it as long as the system keeps running. Keep up the periodic retesting - just because it's been stable doesn't mean you can stop monitoring. But five years of consistent low results is exactly the track record a good system should build.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "I filled the manometer fluid back up but I'm not sure I used the right fluid. Does it matter?", "answer": "Yes - using the wrong fluid can give you inaccurate readings or damage the tube. Most manometer manufacturers specify a particular fluid (often a red gauge fluid sold by radon supply companies). Water works in a pinch and is better than nothing, but it evaporates quickly. Ask the original contractor what fluid they used or contact the manometer manufacturer for the correct type. Refilling with the wrong fluid won't hurt the system - the fan will still run - but the gauge reading may not be reliable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My radon system runs through a finished wall and I can't see the manometer anymore after a renovation. What should I do?", "answer": "You'll want to make the manometer accessible again or have a new one installed in a visible location. Hiding the manometer during a renovation is a common mistake - it defeats the purpose of having one. A contractor can often add a gauge tee to the accessible part of the pipe so you have a visible indicator without tearing into the wall.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "After mitigation, does it matter if I open my basement windows regularly?", "answer": "Opening basement windows significantly affects radon test results - that's why closed-house conditions are required for short-term tests. For long-term living, opening windows increases air exchange, which can help dilute radon. But your mitigation system works under all conditions and you shouldn't feel restricted from opening windows. Just be aware that if you're doing a short-term test, the standard protocol is closed-house conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My mitigation system is connected to a sump pump pit. Is that a reliable suction point?", "answer": "Sump pits are commonly used as suction points because they already provide access to the sub-slab area. The effectiveness depends on how well the pit is connected to the aggregate and soil gas pathways under your slab. Some sump pits work extremely well; others have limited reach. If your post-mitigation results are good, the sump pit is doing its job. If results are marginal, adding a separate core-drilled suction point may extend coverage.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "Can I add insulation around my radon pipe to reduce noise or condensation?", "answer": "You can insulate the pipe itself, but leave the fan housing uninsulated - fans need airflow around the motor to dissipate heat. Condensation on the pipe is normal, especially where it passes through temperature transitions from conditioned to unconditioned space. Insulating that section reduces condensation without affecting system function.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My neighbor says he tests his radon every month. Is that excessive?", "answer": "It's not harmful, but it's more than what the EPA or most guidance recommends. Monthly professional lab tests add cost without adding proportionally more information - radon doesn't change dramatically month-to-month in a stable, mitigated home. If your neighbor wants that level of monitoring, a continuous consumer monitor would give him the same daily data without the cost of monthly test kits. Lab tests every two years, combined with a continuous monitor, covers the range well.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "Should I be worried about radon in the air my mitigation fan exhausts outside my house?", "answer": "The exhaust from a radon mitigation fan is concentrated radon gas being vented outdoors. Outdoors, it dilutes rapidly into the ambient air and is not a significant exposure risk. The key is that the exhaust point is away from windows, doors, and HVAC intakes so the radon doesn't re-enter the house. Standard installation practices account for this - the exhaust should terminate above the eave line or at a location that prevents re-entry.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "Do I need to tell my HVAC company about my radon mitigation system before they do work?", "answer": "It's a good idea to mention it. HVAC work can affect house pressure dynamics - adding or sealing ductwork, changing the furnace or air handler, or installing new ventilation can interact with your mitigation system. A major HVAC overhaul is a good reason to do a radon test afterward to confirm the system is still performing as expected.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My mitigation system seems to be pulling hot air from the basement in summer and I think it's affecting my AC bill. Is that a real concern?", "answer": "It's a real phenomenon. The mitigation fan is exhausting air from under the slab - that air has to be replaced by something, and in a house without a lot of air sealing, it pulls conditioned air. The effect on your energy bill depends on the fan's CFM rating and your home's overall air sealing. Most systems have a modest impact. If you're noticing significant effects, a contractor can evaluate whether the system is oversized for your conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "What if I stop running my mitigation fan to save electricity? Will levels come back up quickly?", "answer": "Yes - radon will begin accumulating again as soon as the fan stops maintaining sub-slab depressurization. How quickly depends on your soil and foundation characteristics, but in high-radon homes, levels can return toward pre-mitigation concentrations within days. The electricity cost of running a radon fan is modest. Don't turn it off to save money - the risk trade-off isn't worth it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "I'm putting my house on the market in 6 months. Should I retest my radon now?", "answer": "Yes - and now is a smart time to do it. If levels are still good, you have a recent test result to show buyers. If they've crept up, you have time to address it before listing. Buyers (and their agents) often ask for radon testing as part of purchase negotiations - having documentation that your system works and levels are current is a selling point, not a liability.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My buyer's inspector ordered a radon test and it came back at 3.4 pCi/L after years of my system running well. What happened?", "answer": "A result of 3.4 pCi/L during a buyer's inspection might reflect the inspection test conditions (sometimes short-term tests are done with windows open or in atypical conditions), a fan that has weakened over time, or genuine seasonal variation. Confirm your own system check - look at the manometer, listen to the fan - and offer to do a second test under controlled conditions. 3.4 is below the EPA action level, but if the system has been under-delivering for a while, it's worth having a contractor evaluate it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My Airthings sent me an alert that radon went above 4.0. What should I do?", "answer": "Check the manometer first - is the fan on and creating suction? Check for any obvious changes: windows left open in the basement, a circuit breaker tripped, or anything that could have interrupted the system. Then watch the monitor over the next 24-48 hours to see if it returns to normal. If it doesn't come back down, and especially if the alert is recurring, it's time to call a contractor and schedule a professional test to confirm what the continuous monitor is showing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My neighbor's mitigation company came out for a free annual checkup. Does my contractor offer that?", "answer": "Some contractors do offer annual or periodic system checks - it varies by contractor. It's worth asking when you have work done. Even without a formal checkup, you can do the main visual checks yourself: manometer, audible fan check, and a look at the exhaust location. A certified radon test every two years is more diagnostic than a visual check alone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "I switched from a charcoal canister test to an electret test for my retest. Are the results comparable?", "answer": "Both charcoal canisters and electret ion chamber tests are valid, EPA-accepted radon measurement methods. They measure radon by different mechanisms but are designed to give comparable results when used correctly. Differences in results between the two methods are usually within the margin of variability for radon testing rather than a systematic bias. You can meaningfully compare results across methods for tracking trends over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My post-mitigation lab result said the result is plus or minus 0.4 pCi/L. What does that mean?", "answer": "That's the measurement uncertainty - the range within which the true radon level likely falls. A result of 1.6 pCi/L ± 0.4 means the actual level is most likely between 1.2 and 2.0 pCi/L. It's a normal part of any measurement and reflects the precision limits of the test method. For levels well below 4.0, the uncertainty range doesn't change your decision. For a result right near 4.0, the uncertainty range is part of how you interpret it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "I'm about to refinish my basement. Will the renovation affect my radon levels?", "answer": "Basement finishing can affect radon in both directions. Sealing the slab with flooring can reduce radon entry. But adding walls, changing air circulation, blocking access to the slab, or accidentally disconnecting or obstructing the mitigation pipe can create problems. Test after any significant basement renovation to confirm your system is still performing. And tell your contractor to leave the mitigation pipe accessible and undisturbed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My mitigation system is on an interior wall and I want to move it. Can I do that?", "answer": "Modifying a mitigation system - moving the suction point, rerouting pipe, or relocating the fan - should be done by a licensed radon professional. The suction point location was chosen based on where aggregate exists under your slab; moving it without checking soil conditions could put the new suction point in an impermeable zone and eliminate effectiveness. If the current location is inconvenient, talk to your original installer or a licensed radon professional about options before you touch anything.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-after-mitigation-monitoring-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My radon mitigation system makes the basement smell different - kind of earthy or musty. Is that normal?", "answer": "The system is pulling air from the soil under your slab - that air can carry earthy or musty odors, especially when there's moisture in the sub-slab material. If the smell is coming from the area around the suction pipe or the fan, it may be that small amounts of soil gas (beyond just radon) are finding their way into the living space at connection points. Make sure all pipe connections are sealed and that there are no gaps at the slab penetration. A completely sealed system shouldn't be bringing soil odor into the house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My radon is 1.1 pCi/L and my contractor says I could turn the fan down to save electricity. Is that a real option?", "answer": "Some higher-capacity fans are installed on variable-speed setups or with a damper that can be adjusted. If your system is pulling more suction than needed to maintain low levels, reducing the fan speed or restricting the airflow slightly can reduce electricity use without sacrificing radon control. This is an adjustment a contractor should make with a gauge and a follow-up test - not something to guess at. If levels stay below 2.0 pCi/L after the adjustment, you're fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "Does my homeowner's insurance cover radon mitigation or system failure?", "answer": "Generally, no. Standard homeowner's policies don't cover radon testing, mitigation installation, or fan replacement. Some policies treat radon mitigation as a home improvement rather than an insurable event. There are specialty environmental coverage riders, but they're uncommon and rarely triggered by typical radon scenarios. Check your policy if you're uncertain, but don't count on insurance to cover radon work.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "I had a radon test done before I renovated and one after. The after result was higher even though I have mitigation. What happened?", "answer": "Renovations can disrupt mitigation effectiveness in a few ways: new cracks from settling or drilling, changes to basement airflow, temporarily disconnected pipes, or a modified floor layout that creates new radon entry pathways. A post-renovation spike is worth taking seriously. Have a contractor evaluate the system after any significant renovation to make sure nothing was disturbed and that coverage still extends across the full foundation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My radon has been rock-solid at 1.3 pCi/L for years. I'm thinking of skipping my next retest. Is that reasonable?", "answer": "With that kind of track record, the risk of skipping one cycle isn't enormous - but the EPA's two-year recommendation exists because fans fail, foundations shift, and nobody catches it without testing. The cost of a radon test is small compared to the cost of not knowing. I'd keep to the two-year schedule even with a great track record. It's a low-effort confirmation that everything is still working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "What happens to radon levels after I seal foundation cracks, with the mitigation system still running?", "answer": "Sealing cracks in addition to running the mitigation system typically helps - it reduces the pathways radon can use to enter the living space. You may see a modest improvement in your radon levels. It's a complementary step, not a replacement for the mitigation fan. The combination of active sub-slab depressurization and sealed pathways is the most effective overall approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My radon is at 0.8 pCi/L with mitigation running. What do I do now?", "answer": "Keep the fan running, check the manometer every month or so, and retest every two years. That's it. 0.8 pCi/L is near outdoor background levels - your system is doing exactly what it should. You've addressed this well.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My radon test came back at 0.4 pCi/L after mitigation. My contractor said that's \"basically outdoor air.\" Is that accurate?", "answer": "Yes - the national average outdoor radon level is approximately 0.4 pCi/L. Getting to that level indoors with a mitigation system running means you've essentially brought your indoor radon down to ambient outdoor conditions. That's about as good as a mitigation system can reasonably achieve.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My Airthings shows higher radon on the first floor than in the basement after mitigation. Is that normal?", "answer": "It's less common but not impossible. Usually radon is highest in the basement and decreases on upper floors as it mixes with more outdoor air. If your first-floor reading is genuinely higher than your basement after mitigation, double-check that the first-floor reading isn't affected by nearby sources - like a crawl space under part of the first floor that the mitigation system isn't reaching, or a sump pit in a room that's partially above grade. Compare readings from the same time of day for a fair comparison.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My contractor said after mitigation I should test once a year. My friend says the EPA says two years. Who's right?", "answer": "Your contractor is being conservative - annual testing is more frequent than the EPA's guideline of every two years with a system installed, but it's not wrong. More testing gives you more data. Two years is the EPA's recommendation as a minimum. Your contractor may have good reasons to suggest annual testing for your specific situation. If your results are consistently very low, two years is defensible. If you've had any variability or marginal results, annual testing gives you faster feedback.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My mitigation was done, I tested, everything came back low, and now I barely think about radon. Is that how it's supposed to work?", "answer": "Pretty much, yes - that's the goal. You identified a problem, addressed it, confirmed the fix is working, and now it's a background maintenance item rather than a daily concern. The system runs, you glance at the manometer occasionally, and you test every couple of years to confirm it's still delivering. Low-maintenance peace of mind is exactly what a well-functioning mitigation system provides.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "I referred a friend to a radon contractor and they said the contractor told them they didn't need to test after installation. Is that right?", "answer": "No. That's bad advice. A post-mitigation test is the only way to confirm the system is actually reducing levels to an acceptable point. Skipping it means your friend has a system that may or may not be working effectively, with no way to know. Every mitigation installation should be followed by a certified post-mitigation test - period.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "What's the single most important thing to do after my radon mitigation system is installed?", "answer": "Get a certified post-mitigation radon test done. Everything else - checking the manometer, listening to the fan, getting the paperwork - is secondary to confirming the system is actually reducing radon to an acceptable level in your home's air. The test is the proof.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My contractor installed mitigation and said \"you're all set.\" Is there anything I should still be doing?", "answer": "Yes. Schedule a post-mitigation radon test if one isn't already arranged. Learn how to read the manometer on your pipe. Mark your calendar for a retest in two years. And save all your documentation - installation date, post-mitigation test result, contractor info - somewhere you can find it. Being \"all set\" means the system is installed; it doesn't mean monitoring is done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "I want to set up some kind of automated alert for my radon system. What are my options?", "answer": "A few options exist: a continuous consumer monitor like the Airthings Wave series sends alerts to your phone through its app if levels rise above thresholds you set. Some mitigation fans have built-in pressure alarms that sound if suction drops. Smart plugs with power monitoring can alert you if the fan loses power. And some security systems can be set up to monitor the outlet circuit. None of these replace periodic certified testing, but they give you real-time awareness between tests.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My radon results are all in pCi/L. My friend in Europe talks about Bq/m³. Are these the same thing?", "answer": "Different units, same measurement of radon. 1 pCi/L equals 37 Bq/m³. The United States uses pCi/L; most of Europe uses Bq/m³. If you're looking at European guidelines or comparing to a foreign test result, multiply pCi/L by 37 to get Bq/m³, or divide Bq/m³ by 37 to get pCi/L. The EPA action level of 4.0 pCi/L is approximately 148 Bq/m³.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "Can a plumber or HVAC tech inspect my radon system, or does it need to be a radon specialist?", "answer": "For basic visual inspection - is the fan running, is the manometer reading, are there obvious pipe leaks - a plumber or HVAC tech might be able to help. But for a meaningful evaluation of system performance, sub-slab pressure testing, and interpretation of radon measurements, you want a certified radon mitigation contractor. It's a specialized field. A general tradesperson can tell you if the fan is spinning; only a radon contractor can tell you if it's doing enough.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My mitigation fan has a 5-year warranty but I just found out the manufacturer went out of business. Now what?", "answer": "If the manufacturer is gone, the warranty isn't worth much in practice. Document what you have and focus on the performance of the system going forward - if it's running well and your radon tests are good, the lack of a warranty doesn't change anything today. Plan for eventual fan replacement as normal maintenance, and when you do replace it, use a current model from a manufacturer with an active warranty and good industry track record.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "Does radon mitigation reduce my home's value or raise it?", "answer": "Having a mitigation system in place and documented test results showing success is generally viewed as a positive by informed buyers - it means the problem has been identified and addressed. An unmitigated home with elevated radon is more of a liability than a home with a working mitigation system. Good documentation and a recent low test result are assets in a real estate transaction, not negatives.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My radon has been fine for years but I just had a new concrete crack patched in the basement. Should I test again?", "answer": "Any time you have foundation work done, a fresh radon test afterward is a reasonable precaution. Crack repairs can change airflow dynamics - a sealed crack is good, but the work itself can temporarily disturb nearby pathways or confirm that additional cracks exist that weren't known. Testing a few weeks after the repair gives you a clean current reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "I got mitigation installed, tested, and got 1.5 pCi/L. My aunt is worried it's still dangerous. What do I tell her?", "answer": "Tell her the mitigation system worked. 1.5 pCi/L is a low level - well below the EPA action threshold and not far above the outdoor average. No level of radon is technically \"zero risk\" because that's how radiation works at the micro level, but 1.5 pCi/L represents a very low risk level and is a genuinely good result. The concern she'd have is appropriate for an unmitigated home; her house at 1.5 with a working system is in a much better position.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My continuous monitor's battery is dying. Should I replace it right away or is it fine to wait a week?", "answer": "Replace it soon - a dead monitor is a monitor that isn't watching. Even so, a week without a continuous monitor isn't a crisis if your mitigation system is confirmed to be running and you have recent test results showing low levels. It's not an emergency, but don't keep deferring it. The value of a continuous monitor is in the ongoing awareness it provides.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "Is there a test that can tell me how well connected my suction point is to the soil under my slab?", "answer": "Yes - a diagnostic sub-slab communication test involves inserting a tube into the slab through a small hole and checking whether the pressure differential from the suction point reaches that location. A radon contractor can perform this test to map how effectively the suction point is communicating with soil under different areas of the slab. It's a useful diagnostic if your post-mitigation results suggest incomplete coverage.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "What if I live in a mobile home or manufactured home? Does radon mitigation work the same way?", "answer": "Manufactured homes have different foundation types - some have a crawl space, some sit on a slab, some have skirted pier foundations. Mitigation approaches vary accordingly. A traditional sub-slab depressurization system works if there's a slab or confined crawl space. Open pier foundations are trickier - the open air flow under the home is actually somewhat protective. If you're concerned about radon in a manufactured home, a licensed radon professional experienced with that construction type is the right call. Don't assume a standard installation approach without getting it assessed first.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-after-mitigation-monitoring-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "My post-mitigation test was 2.9 pCi/L. My neighbor said I should still fix it more. My contractor says it's fine. Who's right?", "answer": "They're both partially right. The contractor is correct that 2.9 pCi/L is below the EPA action level and represents a successful mitigation result. Your neighbor is right that the EPA acknowledges risk in the 2.0-4.0 range and says it's worth considering further action - the risk is lower, but real. Whether to pursue more reduction is a personal decision based on how low you want to go and whether the system can practically get there. 2.9 is fine; lower would be better. Call or text Bill and we can talk through what the numbers mean for your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Additional Practical Questions", "question": "I've never had radon tested or mitigation done. I found this while searching online. Where do I start?", "answer": "Start with a radon test - a basic mail-in charcoal canister test from a certified lab will tell you what your current radon level is. Place it in the lowest livable level of your home for 48-96 hours, then send it to the lab. If the result comes back at 4.0 pCi/L or higher, the EPA recommends mitigation. If it's between 2.0 and 4.0, you're in a range worth thinking about. Fill out the form on the website or give us a call - we can walk you through what the numbers mean and what makes sense next.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "My radon spiked to 8.0 on my Airthings for a few hours and then dropped to 1.2. What caused that?", "answer": "A short spike like that is usually caused by a pressure event - an especially strong wind that briefly reversed airflow through pathways in the foundation, a sudden drop in barometric pressure, or the HVAC system creating an unusual pressure differential. Brief spikes of a few hours that then return to a low baseline aren't necessarily a sign of system failure. If they become frequent or the level stops returning to its previous low, that's when to investigate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "My radon monitor shows radon highest in the morning around 7am and lowest in the afternoon. Why?", "answer": "That's a classic diurnal pattern driven by how the house breathes through the day. In the early morning, the house has been closed overnight with minimal air exchange - radon accumulates more during that window. As the day progresses, doors and windows open, HVAC cycles more actively, and temperature-driven ventilation increases. This pattern is completely normal and doesn't indicate a problem with your mitigation system, as long as the morning peaks are well below 4.0 pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "My Airthings app shows radon spiking every time the furnace kicks on. Is that connected?", "answer": "Possibly. Forced-air furnaces and air handlers create pressure changes in the house - they pull air from the interior, which can briefly alter the pressure differential across the slab and allow more soil gas in through any remaining pathways. Alternatively, the furnace may be pulling air from an area near the suction pipe and temporarily disrupting the mitigation field. If the spikes are brief and levels settle back down quickly, it's a quirk worth noting but not necessarily a crisis. If the average is climbing, a contractor should look at the interaction between your HVAC and mitigation systems.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "My radon system is in the utility room and the door to that room is usually closed. Does that affect anything?", "answer": "It shouldn't - the mitigation fan exhausts outside the house and draws from the sub-slab soil, so the utility room door doesn't affect the suction dynamics under the slab. Where a closed door might matter is if your manometer is in that room and you never go in to check it. Make a point of opening the door periodically to look at the manometer, or ask a contractor to relocate it somewhere more visible.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "My contractor installed the mitigation fan in my attic. Is that a good location?", "answer": "Attic installation is done in some setups - it keeps the fan out of living space and the exhaust can go through the roof or gable. The downside is that attics have extreme temperature swings, which can shorten a fan's life. Some fan manufacturers void warranties if the fan is installed in unconditioned spaces. Ask your contractor about the specific fan model used and whether attic installation is covered by the manufacturer's warranty. If it's not, a different location may have been a better choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "My mitigation contractor used the sump pit as the suction point but I also have a battery backup sump pump. Will the mitigation system interfere with it?", "answer": "The mitigation system draws from above the water level in the pit - it's pulling soil gas, not water. A battery backup sump pump operates at the water level. These two systems generally coexist without interfering with each other. The main consideration is keeping the pit cover well-sealed around both the mitigation pipe and the sump pump discharge pipe. Gaps in the cover let radon back in from the open pit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "My radon system draws through a pipe in the floor of my utility room and the pipe gets water pooling at the bottom sometimes. Is that normal?", "answer": "Some condensation or water accumulation at the bottom of the suction pipe is normal - the fan pulls relatively humid air from the soil, and water can condense inside the pipe. Most installation designs include a low point in the horizontal run where condensation can drain back into the sub-slab area. If water is pooling significantly or backing up into the living space, the pipe may not have been pitched correctly or there may be an unusual amount of groundwater involved. A contractor should look at it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "My fan makes a high-pitched whine sometimes and then it stops. Is that an early sign of failure?", "answer": "An intermittent high-pitched whine that comes and goes can indicate a bearing that's starting to wear or that the fan is responding to changes in air resistance - sometimes debris near the intake causes temporary sound changes. If it's happening regularly and getting worse, the fan is likely in its final years of life. I wouldn't ignore it. A contractor can listen to it and give you a better read on whether it's cosmetic or something that needs addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "What does it mean when my radon system \"short-cycles\" - the fan seems to turn on and off?", "answer": "Radon mitigation fans are designed to run continuously - they should not be cycling on and off. If the fan is turning off and on repeatedly, there's likely an electrical issue: a failing connection, a motor that's overheating and tripping thermal protection, or a controller or plug issue. A fan that's intermittently off is not maintaining consistent sub-slab depressurization. Get it looked at promptly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "I noticed my manometer reading has gradually decreased over the past year. Is that a problem?", "answer": "A gradual reduction in the manometer reading - the fluid displacement getting smaller - could indicate the fan is losing efficiency, or that soil conditions under the slab have changed and resistance to airflow has increased or decreased. It's worth noting and sharing with a contractor. A follow-up radon test alongside the observation tells you whether the change in suction is affecting your radon levels. If levels are still low despite the reduced reading, it may not be a practical problem. If levels have risen, the reduced suction is likely the cause.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "My post-mitigation test showed 1.6 pCi/L but the testing company's report says to \"consider mitigation.\" Does that make sense?", "answer": "Some testing companies include boilerplate language on any result above a certain threshold (sometimes as low as 2.0 pCi/L) suggesting consideration of mitigation, even after mitigation is already in place. In your case, with a system already installed and running, 1.6 pCi/L is a good result. The language on the report may be generic rather than specific to your situation. If you already have a mitigation system delivering 1.6 pCi/L, the system is working - you don't need to re-mitigate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "My neighbor says his radon test from the hardware store is not as accurate as a professional test. Is that true?", "answer": "Consumer charcoal canisters from hardware stores vary in quality, and not all are analyzed by the same labs. Some are perfectly valid; others use less rigorous processing. The key is making sure the test kit is analyzed by a lab certified by NRPP or NRSB, or by your state radon program. The canister itself is mostly just activated charcoal - the accuracy comes from the lab analysis. Check whether your hardware store test specifies which lab processes it and whether that lab is accredited.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "I just moved to a new city and the home I'm renting has a radon mitigation system. The landlord says it was tested 4 years ago at 1.8. Should I get it retested?", "answer": "Four years is past the EPA's two-year retesting recommendation, and as a renter, it's reasonable to ask your landlord to have it retested. If they're unwilling, you can purchase your own test kit and run it yourself - it's inexpensive and gives you current data. You have a right to know what you're breathing in your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Troubleshooting Unusual Readings", "question": "My radon mitigation contractor says I need to replace my fan every 10 years no matter what. Is that right?", "answer": "That's a conservative rule of thumb, not a hard engineering requirement. Fans from major manufacturers often run 15-20 years with no problems. \"Replace at 10 years\" is a simple maintenance guideline some contractors use because it's before the period when failure becomes more likely. There's nothing wrong with that approach - it avoids an unexpected failure. But there's also nothing wrong with monitoring the fan closely (checking radon levels, listening to the motor, checking the manometer) and replacing it when actual signs of wear appear, rather than on a fixed calendar.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Comparing Results Over Time", "question": "My pre-mitigation test was 9.2 pCi/L and my post-mitigation test is 2.0 pCi/L. Is a 78% reduction good?", "answer": "That's an excellent reduction. Going from 9.2 to 2.0 means the system is removing the vast majority of the radon that would otherwise accumulate in your living space. 2.0 pCi/L is right at the lower end of the EPA's \"worth considering\" range and well below the action level. Whether you want to try to push it lower is a judgment call - many people feel comfortable at 2.0. The mitigation system is clearly doing its job.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Comparing Results Over Time", "question": "My first post-mitigation test was 1.4 and my retest two years later was 1.9. Is that increase concerning?", "answer": "A change from 1.4 to 1.9 over two years is worth noting but not alarming. Radon tests have inherent variability - different weather conditions during the test window, seasonal differences, or slight variation in test placement can all contribute to this range of difference. Both results are well below 4.0 pCi/L. If your next test comes in at 2.5 or higher, that's a more meaningful upward trend worth investigating. For now, keep monitoring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Comparing Results Over Time", "question": "My radon test results over 5 years are: 1.2, 1.8, 2.1, 1.6, 1.9. Is there a trend I should be worried about?", "answer": "Your results are bouncing around in the 1.2-2.1 range over five years. There's no clear upward trend - they're moving up and down within a band that's well below the action level. This pattern is normal variability from test conditions, seasons, and measurement uncertainty. The system appears stable. Keep retesting every two years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Comparing Results Over Time", "question": "My radon test results have been: 1.1, 1.3, 1.2, and then suddenly 3.8 last time. What happened?", "answer": "A jump from the 1.1-1.3 range up to 3.8 is significant and suggests something changed. It could be a fan that's starting to fail, a new pathway in the foundation (crack, settling), a suction point that's losing its connection to the aggregate, or conditions during the test itself. I'd start by checking the manometer and listening to the fan. Then do a second confirming test. If the second test also comes back elevated, get a contractor to evaluate the system. Don't let a reading like that sit without follow-up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Comparing Results Over Time", "question": "I retested 2 years after mitigation and the result was exactly the same: 1.7 pCi/L both times. Does that mean anything?", "answer": "It means your system is remarkably consistent. Same result two years apart is a sign of a stable, well-functioning system. The identical number is partly coincidence (rounding and variability in testing could easily have given you 1.5 or 1.9), but the consistency it implies is real. Keep doing what you're doing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Comparing Results Over Time", "question": "My summer test was 1.1 and my winter test was 2.6. That's more than double. Is the system failing in winter?", "answer": "Doubling from summer to winter is at the higher end of seasonal variation but not unheard of in homes where the stack effect is strong. If winter levels are consistently around 2.6 and you're comfortable with that, the system is still doing meaningful work - without it, your winter levels could easily be 6, 8, or 12 pCi/L. If you want to reduce the winter level further, your contractor can evaluate whether additional sealing or suction can narrow the seasonal swing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Comparing Results Over Time", "question": "My previous owner's test showed 0.6 pCi/L and mine came back at 2.1. Did something happen to the system?", "answer": "It's possible, but there are also other explanations. The previous owner's test may have been done under different conditions - summer versus winter, different test duration, different room. Consumer-grade test conditions vary more than lab conditions do. Also, foundation settling, new cracks, or changes in how the house is used can change the result over time. Check the fan and manometer. If the system appears to be running normally, do a second test. If the second test also shows 2.1, bring in a contractor to assess whether more can be done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Comparing Results Over Time", "question": "My post-mitigation test was 1.9 but my contractor said it should eventually settle lower. Is that true?", "answer": "In some systems, levels do continue to decrease gradually as the soil under the slab gets better aerated over months of continuous operation. The bulk of the reduction happens in the first 24-72 hours, but some minor additional improvement can occur. Even so, 1.9 may simply be your equilibrium level. The contractor's statement is partially true - it's worth retesting in 6-12 months to see if there's further improvement. But don't assume the number will keep dropping significantly without a reason to think so.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Comparing Results Over Time", "question": "My contractor did my initial test and my post-mitigation test. Both times the result was 1.0 pCi/L. Did the system even do anything?", "answer": "If both tests genuinely showed 1.0 pCi/L - before and after - it means either the system didn't change anything, the pre-mitigation test underestimated the true level (a single short-term test has variability), or your house was already at a low level before the fan went in. A 1.0 pCi/L pre-mitigation result is below the action level, so mitigation may not have been necessary in the first place. Review the test conditions - especially whether the pre-mitigation test followed closed-house protocol - and make sure the tests are comparable. If they are and the result was always 1.0, your house may simply be a naturally low-radon home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Ventilation, Pressure, and House Dynamics", "question": "I installed a whole-house ventilation system (HRV/ERV) after my radon mitigation. Does that affect the radon levels?", "answer": "It can, in a positive way. An HRV or ERV brings in controlled outdoor air and exchanges it with stale indoor air, which dilutes radon in the living space. In some homes, adding ventilation on top of mitigation can push levels even lower. The two systems complement each other. Even so, an HRV doesn't replace mitigation - it dilutes radon rather than preventing it from entering. A test after the HRV installation will show you the combined effect.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Ventilation, Pressure, and House Dynamics", "question": "My house has a blower door test score below 2.0 ACH50 - it's very tight. Does that make radon mitigation more or less effective?", "answer": "Very tight houses (low ACH) allow less outdoor air dilution, which means radon accumulates faster if the mitigation system has any gaps. The good news is a tight house also means the sub-slab pressure field from your mitigation fan extends more effectively - there's less competing airflow to disrupt it. In a very tight house, post-mitigation testing is especially important because the house doesn't self-ventilate to dilute radon the way a leaky older house might.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Ventilation, Pressure, and House Dynamics", "question": "My house has an open fireplace. Does burning a fire affect my radon levels?", "answer": "Yes - a fireplace burning pulls air from inside the house and sends it up the chimney, which creates a negative pressure that pulls soil gas in from below. This can temporarily spike radon levels when the fireplace is in use. If your continuous monitor shows higher radon on evenings when you have a fire going, that's likely the cause. A glass fireplace door that seals when burning reduces but doesn't eliminate this effect. Mitigation helps, but fireplace-driven spikes may still show up on a continuous monitor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Ventilation, Pressure, and House Dynamics", "question": "My house has a wood stove. My neighbor says wood stoves cause radon spikes. Is that true?", "answer": "The same principle applies as with fireplaces - any combustion appliance that draws combustion air from the house interior creates a slight negative pressure that can pull more soil gas through the foundation. A wood stove in a tightly sealed insert is less problematic than an open fireplace. If you see radon spikes on monitoring data that correlate with stove use, it's worth noting. A radon mitigation system helps, but the combustion appliance is also pulling air from the house - addressing that separately (with an outside air kit for the stove, for example) can help.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Ventilation, Pressure, and House Dynamics", "question": "My home has a heat pump with no combustion - does that mean I don't have the negative pressure issues that cause radon spikes?", "answer": "Without combustion appliances, you've eliminated one major source of negative interior pressure. Heat pumps don't burn air - they transfer heat electrically. This is one of the environmental benefits of all-electric homes from a radon standpoint. Your mitigation system still needs to run, but you're less likely to see combustion-driven radon spikes compared to a house with a gas furnace and water heater.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Ventilation, Pressure, and House Dynamics", "question": "My house has a lot of exhaust fans - bathroom fans, range hood, dryer. Do those affect radon levels?", "answer": "They can, marginally. Every exhaust fan pulls air from inside the house, which has to be replaced by air coming in from somewhere - including potentially through slab pathways. In most houses the effect from bathroom fans and a range hood is relatively small compared to the mitigation system's output. But in very tight houses with many high-CFM exhaust devices running simultaneously, the combined depressurization can work against the mitigation system's effectiveness. If you suspect this is happening, a contractor can do a pressure diagnostics assessment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Ventilation, Pressure, and House Dynamics", "question": "Can opening and closing my garage door affect my radon readings?", "answer": "Attached garages are known to influence radon readings - particularly if the house has air connections with the garage through walls, floors, or HVAC pathways. A garage door opening and closing changes the pressure in the garage space, which can briefly affect the pressure differential in adjacent spaces. If your radon monitor is in a room directly adjacent to the garage and you see brief spikes coinciding with garage door activity, that's likely the mechanism. It's typically a minor and brief effect.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Ventilation, Pressure, and House Dynamics", "question": "My basement is partially below grade and partially walkout. Is my mitigation addressing the below-grade section effectively?", "answer": "The below-grade section of a walkout basement is where radon entry is most likely - soil is in contact with the foundation walls and slab below grade. The mitigation system should be pulling suction primarily from that zone. If the suction point was placed in a section of the slab that's primarily in contact with the below-grade portion, you're in good shape. If the suction point is near the walkout section, the system's reach may not extend as effectively to the deeper areas. Test specifically in the below-grade portion to verify coverage.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Ventilation, Pressure, and House Dynamics", "question": "I have a finished basement with a dropped ceiling. Could radon be accumulating in the ceiling space above the tiles?", "answer": "The space above a suspended ceiling is technically part of the building envelope, and radon can accumulate there. But the more relevant question is what's in the lowest living space - below the dropped ceiling - where you actually spend time. Monitor placement should be below the ceiling tiles at breathing height, not above them. If you're concerned about what's above the ceiling, an assessment of the overall basement levels is more useful than testing in the ceiling cavity.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Ventilation, Pressure, and House Dynamics", "question": "My radon mitigation was done in the basement but I work from home in my first-floor office. Should I monitor there too?", "answer": "Radon typically decreases significantly as you go up from the basement to the first floor and above. The test should be done in the lowest livable level - the basement - because that's where concentrations are highest. If your office is directly above the basement with permeable flooring or gaps, it could have somewhat elevated levels. Placing a continuous monitor on the first floor alongside a basement one for a few months would tell you whether there's meaningful difference. For most people, if the basement is under 2.0 pCi/L, the first floor is well below that.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "I'm a real estate agent and my buyers want to know if a mitigation system adds value to a home. What should I tell them?", "answer": "A documented, well-functioning mitigation system with a recent low test result adds transparency and reduces buyer uncertainty. For buyers in states with high radon prevalence (like Illinois), a system already installed means no post-closing surprise and no remediation cost. Whether it adds measurable dollar value depends on the local market, but it's generally a positive feature, not a liability, when properly documented.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "The house I want to buy had mitigation done but the sellers can't find any records. Should I walk away?", "answer": "No need to walk away - but get a fresh test done. Request it as a condition of the purchase or do it yourself during the inspection period. A current radon test tells you what the system is delivering today, which is the most relevant information. Missing historical records are a nuisance, not necessarily a deal-breaker, as long as you have current data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My house has two separate foundations - original and addition - and the mitigation pipe only goes under the original part. Is that a problem?", "answer": "Yes, potentially. Each separate foundation footprint may need its own suction point if the soil under the addition isn't in communication with the suction point under the original section. If the addition has its own slab, test radon in that area specifically. If levels are elevated in the addition section, a second suction point is likely needed. If the addition is on a crawl space or has a different foundation type, a different mitigation approach may be required there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My basement was converted from a crawl space 20 years ago. The mitigation contractor said the sub-slab aggregate is very thin. Does that affect effectiveness?", "answer": "Yes - suction-based mitigation works best when there's an aggregate layer (gravel, crushed stone) under the slab that allows the pressure field to spread. Thin or absent aggregate means the pressure field has limited reach. In some cases, contractors can improve conditions by drilling multiple suction points, using a higher-capacity fan, or sealing all slab cracks and penetrations to create a more effective system. A contractor experienced with challenging soil conditions can assess what's achievable in your specific case.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "I'm building a new house. Should I install a mitigation system before I even move in?", "answer": "If you're in a moderate or high-radon area (like most of Illinois), installing a radon rough-in or passive system during construction is highly recommended - and in some areas required. A passive system (pipe through the slab without a fan) can be activated with a fan later if needed. This is far less expensive than retrofitting after the fact. Test once you move in, and if levels are elevated, activate the system by installing a fan. If levels are already low, you still have the rough-in ready if that changes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My builder said a passive radon system is enough. Do I need an active one with a fan?", "answer": "A passive system (pipe only, no fan) relies on natural pressure differentials to draw radon out - it works in some cases but is generally less effective than an active system with a fan. Test after moving in and see what your radon level is with the passive system. If it's below 2.0 pCi/L, the passive setup may be adequate. If it's above 2.0, adding a fan to activate the system is a straightforward upgrade that meaningfully improves performance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My house is on a slab with no basement. Does radon mitigation work the same way?", "answer": "Yes - sub-slab depressurization works the same way for slab-on-grade homes. A suction point is drilled through the slab, a pipe is routed to the exterior, and a fan pulls air from beneath the slab and exhausts it outside. The principle is identical to a basement system. Post-mitigation testing and monitoring is the same as well. The only difference is that in a slab home, the entire living area is on the first floor, so radon doesn't have a \"higher level\" to dilute into.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "Can radon enter through my basement walls, not just the floor? Does my mitigation system address that?", "answer": "Radon can enter through both the floor and foundation walls, especially through cracks, joints, and porous concrete. Sub-slab depressurization primarily addresses entry through the floor and the floor-wall joint, which are the most common entry points. For wall entry, sealing visible cracks and penetrations complements the mitigation system. If your post-mitigation test shows levels higher than expected given the fan's suction, wall entry may be a contributing factor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My house has a block wall foundation. Do radon systems work differently?", "answer": "Concrete block walls are porous and hollow - radon can travel through the cores of the blocks as well as through cracks. Sub-slab depressurization still works, but block walls may need additional treatment - sealing the interior wall surface or drilling into the blocks to create a pressure connection. Mitigation in block-wall homes can require a more comprehensive approach than in poured-concrete homes. If you're seeing higher-than-expected results after a standard installation, discuss block wall treatment with your contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My radon system has been installed for three months and the levels have been going down gradually. Is that normal?", "answer": "Yes - some systems take a few months to reach their stable depressurized equilibrium, especially in homes with clay soil or limited aggregate where the pressure field spreads slowly. Gradually declining levels over the first few months is a normal and encouraging pattern. Once the system reaches equilibrium (usually within a few months), levels should stabilize. Do your formal post-mitigation test after that stabilization point for the most accurate baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My friend says I should seal the concrete floor in my basement along with mitigation. Will that help?", "answer": "Sealing the floor is a complementary step that reduces direct radon entry through the concrete surface. Combined with active mitigation, it can help push levels lower. Sealing alone is not a substitute for a fan-based system - concrete is porous and seals eventually wear - but as an addition to an existing system, it's a reasonable enhancement. Make sure whatever sealant is used is appropriate for concrete and is genuinely a vapor barrier, not just a surface coating.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "I live in an area with very high radon (some of my neighbors have pre-mitigation levels above 20 pCi/L). Is a standard mitigation system enough?", "answer": "Very high starting levels - above 10 or 20 pCi/L - sometimes require a higher-capacity system: larger-diameter pipe, a higher-CFM fan, multiple suction points, or additional sealing. The goal is still getting below 4.0 pCi/L (and ideally below 2.0). Most licensed radon professionals in high-radon areas know how to design for more challenging conditions. Post-mitigation testing is especially important in high-radon zones to confirm the system is adequate. If the first test comes back above 4.0, the system may need to be upgraded rather than accepted as-is.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-after-mitigation-monitoring-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My crawl space mitigation uses a fan to pressurize the crawl space rather than depressurize sub-slab soil. Is that normal?", "answer": "Crawl space pressurization is a less common approach - it involves pushing clean air into the crawl space to keep it at slightly higher pressure than the soil, which discourages radon from entering. The more common approach in crawl spaces is sealing the floor with a heavy-duty liner and then depressurizing beneath the liner. Both can work, but depressurization with a liner is generally considered more reliable. If you have a pressurization system, the effectiveness should be confirmed with a post-installation radon test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "Is it true that you can't fully mitigate radon in some homes?", "answer": "In rare cases - usually involving extremely porous soil, block foundations with extensive cracking, or very high geological radon sources - it's difficult to get levels as low as a typical installation achieves. But \"can't mitigate\" is extremely rare. Most homes, including difficult ones, can be brought well below 4.0 pCi/L with the right system design. What varies is the complexity and cost of the system needed to achieve that. If a contractor tells you a home \"can't be mitigated,\" get a second opinion.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My contractor said my radon problem is from the well water, not the soil. Does that change how I test or mitigate?", "answer": "Radon can enter homes through both soil gas and well water (when water is used and radon is released into the air). Waterborne radon is more of a concern with private wells in high-radon geology than with municipal water. If your contractor suspects the water as a source, a water test is warranted alongside the air test. Mitigation for waterborne radon involves treating the water at the point of entry (typically an aeration or activated carbon system at the well), not the same fan-based system used for soil gas. The two sources require different fixes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "I have a radon mitigation system and my water tests show radon in the well water too. Do I need two different solutions?", "answer": "Yes - soil gas mitigation (the fan-based system) and waterborne radon mitigation are separate systems for separate pathways. If both are contributing to your indoor air radon level, you need to address both to achieve the lowest possible indoor air concentration. A water treatment system (aeration or granular activated carbon filter on the well supply) handles the water-borne contribution; your sub-slab depressurization system handles the soil gas. Test both sources to understand how much each is contributing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My radon test result has a laboratory detection limit note. What does that mean?", "answer": "If a lab reports \"less than 0.4 pCi/L\" or a similar detection limit notation, it means the charcoal captured such a small amount of radon that the lab can't distinguish it from background noise in their instruments. The actual level is somewhere between zero and the stated detection limit. For post-mitigation purposes, this is an excellent result - it means your radon is at or below the instrument's ability to detect it. It's not a problem with the test; it's a sign that levels are genuinely very low.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "Should I test radon in every room of my house or just the basement?", "answer": "Standard radon testing protocol is to test in the lowest livable area of the home - typically the basement or lowest floor where you spend time. You don't need to test every room. The basement is the highest-concentration zone and the critical measurement point. If you have concerns about a specific area - a ground-floor bedroom used regularly, a daylight-basement bedroom - testing there in addition to the lowest level is reasonable. But a single lowest-level test is the baseline that matters most.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My whole family slept in the basement for a week during renovation of the main floors. Should I be worried?", "answer": "One week in an elevated-radon environment is not going to cause a meaningful change in lifetime risk - radon risk is about cumulative exposure over years and decades, not short bursts. If the basement was above 4.0 pCi/L and you haven't mitigated yet, that's a reason to prioritize mitigation. But a single week isn't a cause for alarm. Radon doesn't cause acute symptoms or immediate harm - it's a long-term, cumulative radiation risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My house is on a lake and has a walkout basement on the water side. Does proximity to water affect radon?", "answer": "The geological factors under your home - soil type, rock type, uranium content - are what drive radon levels, not proximity to a lake or body of water. Lakeside homes can have high or low radon just like any other home. However, a walkout basement does affect how the foundation interacts with outdoor air - the walkout side is at grade and has more natural air exchange, which can dilute radon. The enclosed below-grade portion is where mitigation matters most. Test the below-grade portion and act on those numbers.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My radon contractor says I need a fan with a higher CFM rating. What does CFM mean in the context of radon mitigation?", "answer": "CFM stands for cubic feet per minute - it's a measure of the fan's airflow capacity. Higher CFM fans move more air, which can extend the pressure field across more of the sub-slab area. Contractors choose fan CFM based on what's needed to achieve adequate suction coverage under your specific slab size and soil type. If a sub-slab communication test shows the pressure field isn't reaching all areas, a higher-CFM fan or additional suction points may be the solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0236", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My mitigation system has a U-bend in the pipe and I'm wondering if that causes any airflow restriction. Should I be concerned?", "answer": "Pipe bends do create minor resistance, but a well-designed system accounts for this. Residential radon fans are sized to handle the resistance of typical pipe runs, including bends. A single U-bend is not going to meaningfully reduce the system's effectiveness. Where excessive bends and long pipe runs can matter is in systems where the fan was undersized or the run is very long. If your post-mitigation result is good, the pipe configuration is working fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0237", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Buying, Selling, and Transferring a House with Mitigation", "question": "My post-mitigation radon is 2.0 exactly. The EPA says 2.0-4.0 is worth considering. Should I do more?", "answer": "2.0 pCi/L is right at the threshold where the EPA says consideration is warranted. The EPA's framing is that this range carries real but lower risk, and individual homeowners have to make a judgment call. If your pre-mitigation level was much higher, getting to 2.0 is significant progress. If you want to try to get it lower, a contractor can evaluate whether more is achievable. If you're content with 2.0 and the system is running well, continuing to monitor it over time is the most important ongoing step. There's no wrong answer here - it's your home and your risk tolerance. Call or text Bill if you want to talk through what makes sense for your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0238", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "What pCi/L should I be aiming for after mitigation?", "answer": "Below 4.0 pCi/L is the EPA's action threshold - the goal is to get there at minimum. Below 2.0 pCi/L is where most contractors and homeowners feel genuinely comfortable. Below 1.0 pCi/L is a great result. The closer to the outdoor average of 0.4 pCi/L, the better. Set 2.0 as your target and 4.0 as your floor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0239", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "Is 1.5 pCi/L a good post-mitigation result?", "answer": "Yes - 1.5 pCi/L is a solid result by any measure. It's well below the EPA action level, in the lower portion of the range most people consider good, and demonstrates the system is working effectively. Keep the fan running and retest in two years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0240", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "My neighbor's mitigation test was 0.3 pCi/L. Mine was 1.8. Should I be jealous?", "answer": "0.3 is an exceptional result - near outdoor levels - and you can appreciate that without reading anything worrying into your 1.8. Your system is working. Results vary by house, soil, foundation, and test conditions. 1.8 is a legitimately good number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0241", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "My radon came back high. I have mitigation. Am I supposed to call someone?", "answer": "Yes. If your test result is at or above 4.0 pCi/L and you have a mitigation system in place, call your contractor. The system may need evaluation - fan check, suction measurement, possible additional suction points. You shouldn't have to accept a high result when a system is installed and running.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0242", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "How much does retesting after mitigation cost?", "answer": "A mail-in short-term test kit can be had for a small amount through many certified labs. A professional radon measurement service costs more but includes certified handling. The specific cost varies, but retesting is one of the lowest-cost home maintenance tasks you can do - well worth it relative to the information it provides.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0243", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "My radon test instructions say to keep the test kit 20 inches off the floor. Why?", "answer": "Test kits should be placed at breathing height - where people actually occupy space. On the floor, you're sampling air that's more concentrated at the slab surface; near the ceiling, you're sampling the more diluted upper air. About 20 inches off the floor (or higher, up to about waist height) represents the air at the level where a person sitting or sleeping in that space would be breathing. It gives you the most relevant measurement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0244", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "My radon level dropped right after turning on the fan but then it leveled off higher than I expected. What's happening?", "answer": "The initial drop is the system pulling the accumulated radon out of the air quickly. After that, the level stabilizes at whatever the system can maintain given the ongoing entry rate from the soil. If it leveled off higher than you wanted, the system is running at its equilibrium performance. Improving that equilibrium means either increasing suction (higher-CFM fan, additional suction point) or reducing entry pathways (sealing cracks, floor-wall joint).", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0245", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "Should I put my radon monitor in the same room as the suction pipe?", "answer": "Not right next to the suction pipe - placing it directly beside the intake can give a skewed reading because the pipe is pulling from below the slab, not from room air. Put the monitor in a central location in the lowest livable space at breathing height, away from the pipe, exterior walls, and HVAC vents. That gives you the most representative reading of actual room air.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0246", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "My Airthings app says my radon \"7-day average\" is 1.4. Is that the number I should use?", "answer": "The 7-day average is a useful rolling figure that smooths out day-to-day variation. For a general picture of how the system is performing, yes - the 7-day average is more meaningful than a single-hour reading. For comparing to a certified test result (which typically averages 48-96 hours), the 48-hour or short-term average is more directly comparable. Use the 7-day for trend awareness and the shorter window to cross-reference lab tests.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0247", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "Can I run my post-mitigation test while my house is for sale and people are coming in and out?", "answer": "Standard closed-house short-term testing requires that exterior doors and windows remain closed except for normal entry and exit. If your house is being shown frequently with doors propped open, that will affect the test result. Try to schedule the test during a period when the house won't be actively shown, or use a long-term test method that doesn't require closed-house conditions and averages over 90 days or more.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0248", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "My family is asthmatic. Does radon make asthma worse?", "answer": "Radon is not known to trigger or worsen asthma - it's a lung-cancer risk from radiation, not a respiratory irritant in the traditional sense. If your family has asthma, ensure good indoor air quality overall (low humidity, no mold, proper ventilation), but radon mitigation is about long-term cancer risk reduction, not asthma management. For any respiratory health concerns, talk to your doctor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0249", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "My mitigation system is supposed to serve a crawl space and a basement. Can one fan do both?", "answer": "In some configurations, one fan can serve multiple zones by drawing from both a crawl space and a basement slab through a shared pipe system. Whether a single fan has adequate capacity depends on the size of both areas and the resistance in the system. A contractor should assess whether the system is appropriately designed for the combined load. Test in both zones - crawl space and basement - separately if you can, to confirm coverage in each.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0250", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "I just got a puppy and she sleeps in the basement. Should I be worried about radon for her?", "answer": "Radon risk is primarily studied in humans - specifically, long-term lung cancer risk from radiation exposure. Animals have shorter lifespans, which reduces cumulative exposure, but the principle of keeping radon low in any living space is the same. If your mitigation system is working and levels are below 2.0 pCi/L, your basement is in good shape for your whole household, furry members included.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0251", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "My radon is 3.5 post-mitigation. My wife says we should move. That seems extreme. What do you think?", "answer": "Moving because of 3.5 pCi/L with a mitigation system in place would be an overreaction - this is a manageable problem, not a reason to sell. 3.5 is below the EPA action level, and there's likely room to improve it further with adjustments to the system. A second suction point, additional sealing, or a fan upgrade are all options worth exploring before any drastic decisions. The system is working; it may just need optimization. Call or text Bill and we can talk through what the numbers mean for your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0252", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "My post-mitigation result was 4.1 pCi/L. Is that a failure?", "answer": "4.1 pCi/L after mitigation is a result that needs attention - you're right above the EPA action level. It's not a catastrophic failure, but it means the system hasn't achieved its primary goal. The contractor should be willing to re-evaluate the installation - additional suction points, a more powerful fan, sealing work, or a different suction location may bring it down. Don't accept 4.1 as your final answer when a working system should deliver better than that.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0253", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "My radon has been below 1.0 pCi/L for 6 years. Can I take the mitigation system out?", "answer": "No. Without the fan running, radon will accumulate again. The system isn't eliminating the source of radon - it's continuously managing it. The low levels you've enjoyed for six years are a result of the system running every day. Removing it would let levels climb back toward your pre-mitigation concentration. Think of it like a sump pump - you don't remove it just because the basement has been dry for years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0254", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "My post-mitigation test company sent me a letter saying the result is \"below the reporting limit.\" What does that mean?", "answer": "It means your radon level was so low that the lab's instruments couldn't reliably quantify it - it's somewhere between zero and the lab's detection floor (often around 0.4 pCi/L). This is the best possible result from a post-mitigation test. The system has driven your radon to near-undetectable levels. Keep the fan running and retest in two years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0255", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "Should I tell my kids' school or pediatrician that our house was mitigated for radon?", "answer": "Sharing that context with your pediatrician is a perfectly reasonable thing to do - they may include it in a background health history. It's worth mentioning so they have a complete picture. You don't need to alert your kids' school - radon is a home-based exposure and doesn't affect the school. If the school building itself is a concern, that's a separate matter governed by the school district's own testing policies.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-after-mitigation-monitoring-0256", "phase": "phase3", "type": "answered_qna", "topic": "workflow-after-mitigation-monitoring", "category": "workflow-after-mitigation-monitoring", "subtopic": "Quick-Answer Common Questions", "question": "My house was built in 1920 and has old stone rubble foundation walls. The radon contractor said standard mitigation might not work as well. Why?", "answer": "Old rubble stone foundations have many small gaps and are porous throughout - there's no clean slab-to-wall joint, and the entire foundation wall is a potential entry point. Sub-slab depressurization works for the floor, but rubble stone walls are harder to address with a single suction system. Interior wall coatings or sealants, combined with active sub-slab mitigation, may be needed for the best result. Radon mitigation in older rubble-foundation homes is doable but often requires a more custom approach. Testing after whatever system is installed is especially important to confirm actual performance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "workflow-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "I just bought an Airthings Wave Radon. What do I do first?", "answer": "Pull the battery tab out of the back, download the Airthings app on your phone, and follow the in-app pairing steps - it walks you through everything. The device pairs via Bluetooth, so keep your phone close during setup. Once it's paired, just hang it on a wall in the lowest lived-in level of your home and let it run.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "Where should I put my Airthings Wave Radon?", "answer": "Hang it in the lowest level of the house where people actually spend time - a bedroom in the basement, a family room, or wherever your family is most often. Avoid bathrooms, kitchens, crawlspaces, and spots right next to HVAC vents. Radon monitors need to breathe normal room air to give you an accurate reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "How high up on the wall should I mount the Airthings Wave?", "answer": "Somewhere between about two and five feet off the floor is the general recommendation. It doesn't have to be exact. What matters more is that it's away from drafts, exterior walls, and areas where air circulation is unusual.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "Does the Airthings Wave Radon have to be on a wall or can I just set it on a shelf?", "answer": "Setting it on a shelf works fine. Airthings designed it to be wall-mounted, but a shelf, nightstand, or bookcase all work. Just give it a few inches of clear space around it so it can sample the air properly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "Do I need Wi-Fi to set up the Airthings Wave Radon?", "answer": "No. The Wave Radon pairs via Bluetooth, not Wi-Fi. Your phone needs an internet connection to download the app and create an account, but the monitor itself talks to your phone over Bluetooth. No Wi-Fi or hub required for the basic setup.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "How long does the Airthings Wave Radon take to give a first reading?", "answer": "It takes about an hour to show an initial reading, and that first number is not very reliable yet. The monitor becomes more accurate as it collects more data - the long-term average, which usually stabilizes after a few days and is more meaningful after a week or more, is what you really want to pay attention to.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "The Airthings app is asking me to create an account. Do I have to?", "answer": "Yes, you need an account to add devices and see your data in the app. It's free to create. The account is what lets you track history, set alerts, and eventually share your readings with family members.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "Can I use the Airthings Wave without the app at all?", "answer": "The Wave Radon doesn't have a screen, so without the app you can't read the numbers. You can wave your hand in front of it to trigger the LED color indicator - green, yellow, or red - which gives you a rough sense of where things stand, but for actual pCi/L readings you need the app.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "My Airthings Wave Radon won't pair with my phone. What do I do?", "answer": "Make sure Bluetooth is turned on and that you've given the app permission to use Bluetooth. Try closing the app fully and reopening it. If the device still won't show up, pull the batteries out for 30 seconds and put them back in. Keep your phone within a few feet of the monitor during pairing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "I set up the Airthings Wave at my house and now it says \"no device found\" in the app. What happened?", "answer": "This usually means your phone is out of Bluetooth range of the monitor, or Bluetooth got toggled off. The app pulls data when your phone is close enough to sync. If you're standing right next to it and it still says that, try force-closing the app and reopening, or check that Bluetooth permissions are enabled for the Airthings app in your phone settings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "Does the Airthings Wave Radon come with the batteries included?", "answer": "Yes, the Airthings Wave Radon ships with batteries already inside - there's just a pull tab to activate them. It's one of the easier device setups around.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "What kind of batteries does the Airthings Wave Radon use?", "answer": "It uses standard AA batteries. They're easy to find anywhere and the device runs on them for a long time - typically many months under normal use.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "How do I know if my Airthings Wave Radon batteries are low?", "answer": "The app will show a low-battery warning in the device detail screen. You can also check battery status directly in the app on the main dashboard. The device won't fail suddenly - you'll get a heads-up before it stops working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "I replaced the batteries in my Airthings Wave and now it's showing weird readings. Is something wrong?", "answer": "When you replace batteries, the device essentially restarts its averaging process. The first readings after a battery swap will be less stable. Give it a day or two and the readings should settle back to normal. If the device is brand new after the swap, the long-term average will take longer to stabilize.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - First Setup", "question": "My Airthings is showing a reading of 0.0. Is that right?", "answer": "A reading of 0.0 can happen right after setup before the device has had enough time to collect data. It can also happen if the batteries are dying or if something went wrong during setup. Give it a few hours. If it stays at 0.0 after 24 hours, try pulling the batteries out for a minute and reinserting them.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - LED Colors and the Wave Gesture", "question": "What does the green, yellow, and red light on the Airthings Wave mean?", "answer": "Green means radon levels are in a good range - below about 2.0 pCi/L. Yellow means levels are elevated and worth keeping an eye on - roughly 2.0 to 3.9 pCi/L. Red means radon is high enough that the EPA recommends taking action - 4.0 pCi/L or above. The exact thresholds can be adjusted in the app, but those are the defaults.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - LED Colors and the Wave Gesture", "question": "How do I make the Airthings Wave light up?", "answer": "Wave your hand slowly in front of the sensor on the face of the device - that's why it's called the Wave. The LED ring will light up green, yellow, or red based on current radon levels. It's designed so you can check it at a glance without pulling out your phone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - LED Colors and the Wave Gesture", "question": "My Airthings Wave won't light up when I wave at it. Is it broken?", "answer": "Try waving more slowly and closer to the front face of the device - about 6 to 12 inches away. If it still doesn't respond, check the battery level in the app. A very low battery can cause the LED to stop responding before the device itself stops recording. If batteries are fine and it still won't trigger, a battery pull-and-reinsert sometimes fixes it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - LED Colors and the Wave Gesture", "question": "My mom has an Airthings and doesn't know what the yellow circle means. How do I explain it to her?", "answer": "Tell her yellow means radon levels in her house are in the middle range - not at the point where action is required right now, but worth watching. The EPA says levels between 2 and 4 pCi/L are low enough to live with but high enough to consider doing something about. She doesn't need to panic - she just needs to check again in a few weeks and see if it stays yellow or moves.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - LED Colors and the Wave Gesture", "question": "My dad's Airthings went red for the first time and he called me freaking out. What do I tell him?", "answer": "Tell him red just means the current or recent average is above 4.0 pCi/L, which is the threshold where the EPA recommends fixing. That's useful information - it means mitigation is worth looking into. One red reading doesn't mean a health emergency happened overnight; radon risk is cumulative over years. The right next step is to confirm the reading with a professional test and then get the house evaluated for a mitigation system. Call or text us and we can talk through what to do next.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - LED Colors and the Wave Gesture", "question": "The LED on my Airthings Wave is green but the app shows 2.8. Should I be worried?", "answer": "The LED colors have thresholds - green typically means below about 2.0 pCi/L, but if the monitor was calibrated or thresholds were adjusted, the LED might reflect a short-window average that's lower while the 7-day or long-term average in the app is higher. At 2.8 pCi/L, you're in the yellow zone by EPA guidelines - not urgent, but worth watching. If it stays there or climbs, mitigation is worth considering.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - LED Colors and the Wave Gesture", "question": "Can I change the thresholds that trigger the yellow or red LED on my Airthings?", "answer": "Yes, the Airthings app lets you adjust alert thresholds and, to some extent, the LED trigger levels. By default the thresholds follow EPA guidance, which is what we'd recommend keeping.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Radon - LED Colors and the Wave Gesture", "question": "The Airthings Wave light is red but the reading in the app shows 3.6. Which one is right?", "answer": "Trust the number in the app over the LED color. The LED is a quick visual indicator, and the colors may reflect a different time window or the threshold may be set slightly lower than the EPA default. At 3.6 pCi/L you're in the zone where EPA guidance says mitigation is worth considering. Worth keeping an eye on and having a professional test done if you haven't.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Corentium Home and Corentium Home 2", "question": "What's the difference between the Airthings Corentium Home and the Wave Radon?", "answer": "The Corentium Home has a built-in digital display that shows you the radon reading right on the device - no app, no phone required. The Wave Radon has no display and relies on the app and the LED color ring. If you want something a family member can just look at without any technology involved, the Corentium Home is usually the better fit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Corentium Home and Corentium Home 2", "question": "Does the Airthings Corentium Home need to connect to an app or Wi-Fi?", "answer": "No. The Corentium Home is a standalone device with a screen. It doesn't need a phone, an app, Wi-Fi, or Bluetooth to show you radon levels. You plug it in (or put batteries in depending on the version) and it just starts measuring and displaying the reading on its own.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Corentium Home and Corentium Home 2", "question": "How do I read the Airthings Corentium Home display?", "answer": "The display shows three numbers: the current reading, the last 24-hour average, and the long-term average (usually labeled as LTA or shown with a house icon). The long-term average is the most meaningful one for deciding whether your radon levels are a concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Corentium Home and Corentium Home 2", "question": "My mom's Corentium Home just shows a long-term reading of 4.8. Is that bad?", "answer": "At 4.8 pCi/L, that's above the EPA's action guideline of 4.0 pCi/L. That's the number that matters most - the long-term average reflects what the house has actually been like over weeks and months, not just one day. It's time to get the house tested professionally to confirm, and to look into a mitigation system. Give us a call and we can walk through the next steps.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Corentium Home and Corentium Home 2", "question": "Does the Corentium Home 2 work with the Airthings app?", "answer": "The Corentium Home 2 added optional Bluetooth connectivity so you can optionally pair it to the app - but it still works completely independently without one. If you want history and graphs, you can link it to the app. If you just want the display, no pairing required.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Corentium Home and Corentium Home 2", "question": "How long does the Corentium Home run on batteries?", "answer": "The Corentium Home is battery-powered and typically runs for many months on a set of batteries. The display and the slow sampling cycle keep power consumption low. Check the current reading on the screen - if the device is working normally, the batteries are fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Corentium Home and Corentium Home 2", "question": "My neighbor has an Airthings Corentium and the screen is hard to read. Is that normal?", "answer": "The display is a small segmented LCD and can be dim in bright rooms or from certain angles. Try looking straight at it in normal indoor lighting. If the screen seems completely blank, the batteries may be low or the device may be off.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Corentium Home and Corentium Home 2", "question": "I got a Corentium Home as a gift. Does it need any registration to work?", "answer": "No. The Corentium Home works right out of the box with no registration, no app, and no internet connection. Just put in the batteries and let it run. The optional app connection is there if you want it, not required.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Corentium Home and Corentium Home 2", "question": "The Corentium Home is showing dashes on the display instead of a number. What does that mean?", "answer": "Dashes or blank segments on the Corentium Home usually mean the device hasn't been running long enough to generate a reading yet, or the batteries are very low. The device needs at least an hour of operation before it shows any reading, and the long-term average takes several days to become meaningful. If the batteries are fresh and it still shows dashes after a day, try removing and reinserting the batteries.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Corentium Home and Corentium Home 2", "question": "Can the Corentium Home store historical data?", "answer": "The Corentium Home tracks a running long-term average and shows short-term and current readings, but it doesn't log timestamped historical data that you can scroll through the way the app-connected devices do. For a full data history with graphs, you'd need a device that connects to the Airthings app.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Plus - Multi-Sensor Device", "question": "What does the Airthings Wave Plus measure besides radon?", "answer": "The Wave Plus tracks radon, CO2 (carbon dioxide), TVOCs (total volatile organic compounds), temperature, humidity, and air pressure. It's designed to give a broader picture of indoor air quality, not just radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Plus - Multi-Sensor Device", "question": "Is the Airthings Wave Plus worth the extra cost over the basic Wave Radon?", "answer": "If you only care about radon, the basic Wave Radon does that job at a lower price. The Wave Plus makes more sense if you're also curious about CO2 levels from poor ventilation, VOCs from new furniture or paint, or you just want a fuller indoor air quality picture. For radon-specific testing, either device works.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Plus - Multi-Sensor Device", "question": "My Airthings Wave Plus is showing high VOC levels. Should I be concerned?", "answer": "VOCs spike from everyday things - cooking, cleaning products, new furniture off-gassing, paint, air fresheners. A short spike isn't necessarily a problem. If your VOC reading is chronically elevated and you're not sure why, it's worth ventilating more and seeing if that helps. The Wave Plus can help you figure out what activities are causing it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Plus - Multi-Sensor Device", "question": "The CO2 on my Wave Plus jumped way up and then came back down. What caused that?", "answer": "CO2 builds up when people are in a room breathing, especially in a space with limited fresh air. It's very common to see CO2 spike when a room is full of people and drop when they leave or windows are opened. It doesn't mean anything is wrong with the device.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Plus - Multi-Sensor Device", "question": "Does the Airthings Wave Plus connect the same way as the Wave Radon?", "answer": "Yes, same process - Bluetooth pairing through the Airthings app. The setup is nearly identical. The app just shows more sensor panels for the Wave Plus.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Plus - Multi-Sensor Device", "question": "Can the Wave Plus work without the app?", "answer": "Like the Wave Radon, the Wave Plus has no screen, so without the app you can only use the LED color ring and the wave gesture. The LED on the Wave Plus reflects radon levels specifically, not the other sensors, unless you've changed the settings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Plus - Multi-Sensor Device", "question": "My Wave Plus humidity reading seems way off compared to my thermostat. Which one is right?", "answer": "Humidity sensors in consumer devices are generally accurate but not laboratory-grade. Small differences between the Wave Plus and a thermostat or weather station are normal. If the difference is huge - like 40 percentage points - it may indicate a sensor issue or the device may be placed near a source of moisture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Wave Plus - Multi-Sensor Device", "question": "Does the radon sensor in the Wave Plus work the same as the one in the Wave Radon?", "answer": "Yes, the radon sensor technology is the same in both devices. The Wave Plus has the same radon measurement capability as the Wave Radon - the additional sensors are independent additions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings View Radon and the Hub", "question": "What is the Airthings View Radon?", "answer": "The View Radon is a wall-mounted display that shows your radon levels in real time on a large, easy-to-read screen. It connects via Wi-Fi, so it keeps your data synced to the Airthings dashboard without needing your phone nearby. It's a good option for people who want an always-visible display.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings View Radon and the Hub", "question": "Does the Airthings View Radon need a hub?", "answer": "No, the View Radon connects directly to your home Wi-Fi. It doesn't need the separate Airthings Hub. The Hub is useful for connecting Bluetooth-only devices (like the Wave Radon) to the internet without needing your phone nearby - but the View Radon has Wi-Fi built in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings View Radon and the Hub", "question": "What is the Airthings Hub and do I need one?", "answer": "The Airthings Hub is a small device that plugs into an outlet and connects to your Wi-Fi. It acts as a bridge for Bluetooth devices like the Wave Radon, keeping them synced to the cloud even when your phone isn't home. Whether you need one depends on your setup - if you're away from home a lot and want continuous cloud sync, a Hub makes that possible. If you're fine with syncing data only when your phone comes within Bluetooth range, you don't need one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings View Radon and the Hub", "question": "My Wave Radon only syncs when I get home. Can I get data when I'm away?", "answer": "Without a Hub, the Wave Radon only syncs data to the cloud when your phone is within Bluetooth range. If you want real-time data from anywhere, the Airthings Hub solves that - it keeps the monitor connected to the cloud 24/7.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings View Radon and the Hub", "question": "Does the Airthings Hub require a monthly fee?", "answer": "No subscription is needed for the Hub itself or for basic app features. You buy the Hub outright and it works with your existing Airthings app account. Airthings does offer some premium features at a cost, but the core functionality - readings, history, alerts - doesn't require a subscription.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings View Radon and the Hub", "question": "Is the Airthings View Plus the same as the View Radon?", "answer": "They're related products in the View family. The View Radon focuses specifically on radon. The View Plus adds more sensors (CO2, VOC, temperature, humidity, pressure) similar to what the Wave Plus does. If you just want radon with a display, the View Radon covers it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings View Radon and the Hub", "question": "Does the Airthings View Radon have batteries or does it need to be plugged in?", "answer": "The View Radon is typically USB-powered rather than battery-powered. It's designed to be a fixed, always-on display device.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "The Airthings App - Download, Account, Dashboard", "question": "Where do I download the Airthings app?", "answer": "From the App Store if you have an iPhone, or the Google Play Store if you have an Android phone. Just search \"Airthings.\" It's free to download.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "The Airthings App - Download, Account, Dashboard", "question": "Is the Airthings app free?", "answer": "Yes, the app is free. Creating an account is free. Basic features - readings, history, alerts - are all included at no cost. There are some optional premium features Airthings offers for a fee, but most home users will never need those.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "The Airthings App - Download, Account, Dashboard", "question": "Do I need an account to use the Airthings app?", "answer": "Yes, you need to create a free account. The account is what stores your device data, keeps history, and lets you set alerts. It also lets you share access with family members.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "The Airthings App - Download, Account, Dashboard", "question": "I forgot my Airthings password. How do I get back in?", "answer": "Use the \"Forgot password\" option on the login screen. Airthings will send a reset link to the email address you used when you created your account. If you don't see the email, check your spam folder.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "The Airthings App - Download, Account, Dashboard", "question": "Can I use the Airthings app on multiple phones?", "answer": "Yes. You can log into your Airthings account from multiple devices. Any phone logged into the same account can see the readings, history, and settings for all devices on that account.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "The Airthings App - Download, Account, Dashboard", "question": "How do I add my Airthings device to the app?", "answer": "Open the app, tap the \"+\" or \"Add device\" option, and follow the on-screen steps. The app will search for nearby Bluetooth devices. Make sure Bluetooth is on and the device is powered up before you start.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "The Airthings App - Download, Account, Dashboard", "question": "I'm looking at the Airthings app dashboard and don't know what I'm looking at. Can you walk me through it?", "answer": "The main dashboard shows your devices and their current readings. Tap on a device to see its detail screen, which shows the current radon number, a 24-hour average, and a long-term average. There are usually graphs showing how the number has moved over time. The number to pay the most attention to is the long-term average - that's what actually tells you whether your house has a radon issue.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "The Airthings App - Download, Account, Dashboard", "question": "The Airthings app is showing three different numbers. Which one matters?", "answer": "The long-term average is the one that matters most for radon risk decisions. The 24-hour reading bounces around with normal changes in weather and air pressure. The long-term average smooths all of that out and gives you a reliable picture of what your home is actually like.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "The Airthings App - Download, Account, Dashboard", "question": "How do I see the graph of my radon readings over time in the Airthings app?", "answer": "Tap on your device in the app, then tap on the radon reading. You should see a graph with time options - 24 hours, 7 days, 30 days, and longer periods. The longer views are the most useful for spotting patterns.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "The Airthings App - Download, Account, Dashboard", "question": "My Airthings app says \"last updated\" from a few days ago. Is it still recording?", "answer": "If the device is out of Bluetooth range of your phone, the app won't receive new data, but the device itself is still recording locally. When your phone comes back within range, the app will sync the data it missed. If you want continuous cloud sync without needing your phone present, an Airthings Hub solves that.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "The Airthings App - Download, Account, Dashboard", "question": "Can I check my Airthings from a computer, not just my phone?", "answer": "Yes, Airthings has a web dashboard at dashboard.airthings.com where you can log in and see your readings and history from any browser.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "The Airthings App - Download, Account, Dashboard", "question": "Does the Airthings app work on tablets?", "answer": "Yes, the app runs on both iPhones and Android phones, and it works on tablets as well. Anything that can run iOS or Android apps and has Bluetooth should work.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Readings, Graphs, and What to Trust", "question": "My Airthings 24-hour reading is 6.2 but the long-term average is 2.1. Which should I believe?", "answer": "Believe the long-term average for radon risk assessment. Short-term readings - 24 hours or less - bounce around because radon levels naturally rise and fall with weather, barometric pressure, wind, and whether windows are open. A single high day doesn't necessarily mean your home has a chronic problem. Even so, if the 24-hour reading is consistently high over multiple days, the long-term average will start to reflect it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Readings, Graphs, and What to Trust", "question": "Why does my Airthings reading change so much from day to day?", "answer": "Radon levels in a home are not static - they go up and down naturally with barometric pressure changes, temperature swings, whether doors and windows are open, and even how windy it is outside. This is completely normal and doesn't mean the monitor is broken. The long-term average accounts for all of this fluctuation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Readings, Graphs, and What to Trust", "question": "My Airthings was at 1.8 for months and now it jumped to 5.3. Is it broken?", "answer": "Probably not broken. Short-term spikes can happen when the weather changes dramatically - a cold front, a big pressure drop, or a period of heavy rain can temporarily push radon levels up. Give it a few days and see if it comes back down. If the long-term average starts climbing toward 4.0 and stays there, that's when you'd want to take action. If one spike concerns you, a professional test can give you a second opinion.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Readings, Graphs, and What to Trust", "question": "What's a normal radon reading on an Airthings monitor?", "answer": "The national average in the US is around 1.3 pCi/L. Many homes run between 1.0 and 2.5 pCi/L. Below 2.0 pCi/L is generally in a comfortable range. Between 2.0 and 4.0 pCi/L the EPA says the risk is lower but real - worth considering mitigation. At or above 4.0 pCi/L the EPA recommends fixing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Readings, Graphs, and What to Trust", "question": "My long-term average just hit 4.0 exactly. Do I need to do something?", "answer": "At 4.0 pCi/L, you're right at the EPA action guideline - that's the threshold where the EPA recommends mitigation. Getting a professional test to confirm makes sense, and it's worth having someone look at your home to see if mitigation is practical. There's no radon level that carries zero risk, and 4.0 is where the EPA draws the line for taking action.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Readings, Graphs, and What to Trust", "question": "The Airthings graph shows my radon spiking every night. Is that normal?", "answer": "It's very common for radon to be higher overnight and early morning. Houses tend to be closed up at night, and in cooler overnight temperatures the pressure dynamics inside a house can pull more radon up from the soil. This is a well-documented pattern and doesn't mean anything is wrong with your monitor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Readings, Graphs, and What to Trust", "question": "My reading went from 3.1 to 7.8 overnight. That seems impossible.", "answer": "It's unusual but not impossible, especially if there was a significant weather event - a storm system moving through, a big barometric pressure drop - or if something changed in the house like opening up a crawlspace or operating a wood stove. Let it run for a few more days and see where the long-term average settles. If it stays elevated, have a professional test done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Readings, Graphs, and What to Trust", "question": "Is a 24-hour reading ever useful, or should I just always look at the long-term average?", "answer": "The 24-hour reading is useful for spotting short-term changes - like seeing radon go up when you close all your windows for the first time in fall, or noticing a spike after a big storm. For deciding whether your home needs mitigation, the long-term average is what matters. Think of the 24-hour reading as \"what's happening right now\" and the long-term average as \"what my house is actually like.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Readings, Graphs, and What to Trust", "question": "How long does it take for the Airthings long-term average to stabilize?", "answer": "Typically a week to two weeks of continuous operation before the long-term average is reliable enough to act on. Airthings usually shows a confidence level or a note about reading accuracy in the first days. For decisions about whether to mitigate, most professionals suggest letting a monitor run for at least 30 days.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Bluetooth Range and Syncing", "question": "How far does the Bluetooth reach on the Airthings Wave?", "answer": "Bluetooth range varies by environment - walls, floors, and interference all affect it. In a typical home, the Wave Radon's Bluetooth reaches through a wall or two, maybe 30 to 50 feet in open space. If your phone is upstairs and the monitor is in the basement, syncing may be unreliable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Bluetooth Range and Syncing", "question": "My Airthings is in the basement and my phone never gets down there. Will the data be lost?", "answer": "No, the device stores its data locally. When you do bring your phone within range - even just walking through the basement - the app will sync everything it missed. You won't lose readings just because your phone isn't nearby.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Bluetooth Range and Syncing", "question": "Does the Airthings Wave Radon store data when my phone isn't home?", "answer": "Yes. The device records readings continuously whether or not your phone is nearby. The data is stored on the device. When your phone comes back into Bluetooth range, the app syncs and you'll see the full history.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Bluetooth Range and Syncing", "question": "How much data can the Airthings device store locally?", "answer": "Airthings devices can store a significant amount of historical data locally - enough that occasional syncing is fine. You don't need to be home every day. If you go on a week-long vacation, it'll sync when you get back.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Bluetooth Range and Syncing", "question": "I have the Airthings app open but it keeps saying it can't find the device. My phone is right next to it.", "answer": "Try toggling Bluetooth off and back on on your phone. Close the app fully and reopen it. If the monitor was recently moved or the batteries replaced, it may need a moment to re-establish connection. In rare cases, removing the device from the app and re-adding it solves persistent pairing issues.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Bluetooth Range and Syncing", "question": "Does the Airthings app need to be open for data to sync?", "answer": "On most phones, the app needs to be at least running in the background for a Bluetooth sync to happen automatically. Some phones with strict battery management may kill background apps - in that case you'd need to open the app to trigger a sync. The Airthings Hub solves this entirely since it handles the sync independently.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Bluetooth Range and Syncing", "question": "My Airthings app shows data that's three weeks old. How do I force a sync?", "answer": "Open the app with your phone in the same room as the monitor. Pull down on the dashboard to refresh, or tap into the device. The app should connect and pull in the missed data. If it doesn't connect, check that Bluetooth is on and the app has Bluetooth permissions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Battery Life", "question": "How long do the batteries last in the Airthings Wave Radon?", "answer": "Airthings hasn't published a precise hour count, and real-world life depends on how often you sync, temperature, and other factors. In practice, most users get many months of use - often 12 to 18 months - before needing a replacement. The app will warn you before they die.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Battery Life", "question": "Will my Airthings readings be lost when I replace the batteries?", "answer": "No. When you replace batteries, the long-term average resets because the device has restarted. The historical data that was synced to the app is still there. But the device's internal long-term average will start building again from the point of the battery swap.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Battery Life", "question": "My Airthings app is showing the battery at 10%. How urgent is that?", "answer": "Low battery warnings give you some lead time - 10% typically means the device still has some life left, but it's a good time to pick up replacement batteries and swap them in soon. Don't let it die completely if you want continuous monitoring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Battery Life", "question": "Can I use rechargeable batteries in my Airthings Wave Radon?", "answer": "Airthings recommends standard alkaline batteries. Rechargeable NiMH batteries have a slightly different voltage profile that can cause the battery level indicator to read inaccurately. They technically work, but the battery display may be unreliable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Troubleshooting - Offline, \"---\", Won't Pair", "question": "My Airthings app shows the device as \"offline.\" What does that mean?", "answer": "For a Bluetooth-only device, \"offline\" in the app typically just means your phone hasn't synced with it recently - the monitor is probably still running and recording. Bring your phone close to the device and open the app. If it's a Wi-Fi connected device and it shows offline, check that your Wi-Fi is working and that the device is powered.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Troubleshooting - Offline, \"---\", Won't Pair", "question": "My Airthings is showing \"---\" in the app instead of a number. What's wrong?", "answer": "Three dashes usually mean the device hasn't generated enough data to show a reading yet, or it's lost connection and the app is displaying a cached but incomplete state. If the device is new, give it an hour or two. If it's been running for a while, try syncing by bringing your phone close to the device.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Troubleshooting - Offline, \"---\", Won't Pair", "question": "My Airthings shows question marks where the reading should be. What does that mean?", "answer": "Question marks typically mean the device is still warming up and hasn't collected enough data to display a confident reading. This is normal in the first hour or two after setup or battery replacement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Troubleshooting - Offline, \"---\", Won't Pair", "question": "My Airthings Wave won't connect to Bluetooth no matter what I do. I've tried everything.", "answer": "Try these in order: make sure your phone's Bluetooth is on; check that the Airthings app has Bluetooth permission in your phone settings; pull the batteries out of the device for 60 seconds and reinsert; force-close and reopen the app. If none of that works, try removing the device from your account in the app and re-adding it from scratch. In rare cases a full app uninstall and reinstall clears persistent pairing issues.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Troubleshooting - Offline, \"---\", Won't Pair", "question": "The Airthings app says my device is offline but I'm standing right next to it.", "answer": "Check that Bluetooth is enabled on your phone and that the Airthings app has permission to use Bluetooth. Some Android phones require Location permission as well for Bluetooth scanning to work. Try toggling Bluetooth off and on. If it still won't connect, a battery pull-and-reinsert on the device often resets the Bluetooth connection.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Troubleshooting - Offline, \"---\", Won't Pair", "question": "My Airthings worked for months and now the app can't find it at all.", "answer": "Check the batteries first - this is the most common cause of a device that suddenly disappears. If batteries are fine, try the force-close/reopen routine on the app and make sure you're close to the device. If you recently got a new phone and didn't re-pair the device, you'll need to go through the pairing process again on the new phone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Troubleshooting - Offline, \"---\", Won't Pair", "question": "The Airthings app is giving me a \"device not found\" error during setup. What am I doing wrong?", "answer": "Make sure Bluetooth is on. On Android, make sure Location Services are enabled - Android requires location permission for Bluetooth device discovery even though it's not about your location. Check that the device is powered (you should see a solid light or flash when you wave at it). If you still can't find it, pull the batteries and reinsert them before trying again.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Troubleshooting - Offline, \"---\", Won't Pair", "question": "I tried to add my Airthings to the app and it said the serial number is already registered. What does that mean?", "answer": "That means the device is already tied to an account - either yours (if you've set it up before) or a previous owner's. If it's your device and you just can't find it in your account, check that you're logged into the right account. If you bought it used and it's registered to someone else, you'll need to factory reset it to clear the previous registration.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Reset for New Owner / Used Device", "question": "I bought a used Airthings. How do I set it up for myself?", "answer": "A used Airthings will likely still be registered to the previous owner's account, which will prevent you from adding it to yours. You need to factory reset the device to clear the old registration. The reset process varies by model - for the Wave devices, it typically involves pressing and holding a button (or button combination) on the device. Check the Airthings support site for the specific reset steps for your model. Once reset, you can add it to your account in the app like a new device.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Reset for New Owner / Used Device", "question": "Does resetting an Airthings delete all the old data?", "answer": "A factory reset clears the device's local data and removes the account association. Any data that was previously synced to the old owner's Airthings cloud account stays in their account - you won't have access to it. After reset, the device starts fresh.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Reset for New Owner / Used Device", "question": "How do I remove my Airthings from my account if I'm selling it?", "answer": "In the Airthings app, go to your device settings and look for a \"Remove device\" or \"Delete device\" option. Removing it from your account disassociates it so the new owner can add it to theirs. You may also want to factory reset the device to clear any locally stored data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Reset for New Owner / Used Device", "question": "I gave my Airthings to my daughter. How does she set it up?", "answer": "Remove the device from your Airthings account first, or factory reset it. Then have her download the Airthings app, create a free account, and follow the pairing steps as if it were a new device. Once paired to her account, she'll start building her own reading history.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Account Issues", "question": "I can't log into my Airthings account. What do I do?", "answer": "First try the \"Forgot password\" reset flow - that handles most login issues. If you used \"Sign in with Google\" or \"Sign in with Apple\" when you created your account, make sure you're using that same method. If you've tried everything and still can't get in, contact Airthings support directly through their website.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Account Issues", "question": "I have two Airthings monitors. Can they both show up in the same app?", "answer": "Yes. The Airthings app supports multiple devices under one account. Both monitors will appear on your dashboard, and you can tap into each one to see its readings and history separately.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Account Issues", "question": "Can I share my Airthings data with my spouse?", "answer": "Yes. The Airthings app has a sharing feature that lets you invite family members or anyone else to view your device data. They'll need an Airthings account, and you can grant them access through the app settings. They'll be able to see readings but typically not change device settings unless you grant them full access.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Account Issues", "question": "My wife wants to see the radon readings on her phone too. How do we set that up?", "answer": "She'll need to download the Airthings app and create a free account. Then in your Airthings app, go to the sharing or household settings and invite her email address. She accepts the invite and she'll be able to see the readings on her phone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Account Issues", "question": "Can multiple people in the household get radon alerts?", "answer": "Yes. Once you've added family members to your Airthings account through the sharing feature, they can also set up notifications on their phones through the app settings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Alerts and Notifications", "question": "How do I set up a radon alert on the Airthings app?", "answer": "In the app, go to the device settings or notification settings. You'll find options to set alert thresholds - for example, get a notification when radon exceeds 4.0 pCi/L. You can set the threshold to whatever level you want, and the app will send a push notification to your phone when the reading crosses it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Alerts and Notifications", "question": "My Airthings sent me an alert but I don't know what it means. It said my radon is \"elevated.\"", "answer": "An elevated alert means the reading crossed the threshold you (or the app default) has set - usually around 4.0 pCi/L. It doesn't mean there's an emergency. Check the app to see the actual number and look at the long-term average. If the long-term average is pushing above 4.0, it's time to look at mitigation. If it's a short-term spike, watch it for a few days.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Alerts and Notifications", "question": "I'm not getting any notifications from the Airthings app. How do I turn them on?", "answer": "Check two places: first, inside the Airthings app under notification or alert settings to make sure alerts are enabled and a threshold is set. Second, in your phone's system settings, make sure notifications are allowed for the Airthings app. Both need to be on for notifications to come through.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Alerts and Notifications", "question": "Can I get an email alert from Airthings instead of a phone notification?", "answer": "Airthings primarily sends push notifications through the app. Email alerts depend on the account tier and app version - check your account settings in the app or on the web dashboard to see what's available.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Alerts and Notifications", "question": "My Airthings alert keeps going off but the number isn't that high. Can I adjust the threshold?", "answer": "Yes. In the app's device or notification settings you can change the alert threshold to any level you choose. If the default is too sensitive for your situation, you can raise it. Most people set it somewhere around 4.0 pCi/L to align with EPA guidance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Smart Home Integration", "question": "Does Airthings work with Alexa?", "answer": "Yes. Airthings has an Alexa skill that lets you ask your Echo device for your current radon reading. You'll need to enable the Airthings skill in the Alexa app and link your Airthings account.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Smart Home Integration", "question": "Can I connect my Airthings to Google Home?", "answer": "Yes, Airthings supports Google Home integration. You can link your account through the Google Home app and ask Google Assistant about your radon levels.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Smart Home Integration", "question": "Does Airthings work with Apple HomeKit?", "answer": "Airthings has worked on HomeKit compatibility, though support has varied by product and firmware version. Check the current Airthings compatibility list for your specific device model - the answer has changed over time with firmware updates.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Smart Home Integration", "question": "Can I connect my Airthings to a smart home routine - like turning on a fan when radon gets high?", "answer": "With integrations like IFTTT or through platforms like Home Assistant, you can create automations based on Airthings data. Airthings has also offered its own automation features for things like connecting with smart ventilation. It depends on what smart home system you're using and what you're trying to automate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Smart Home Integration", "question": "My Airthings shows up in the Alexa app but I can't get it to tell me my radon reading.", "answer": "Make sure the Airthings skill is enabled and your account is linked. Try \"Alexa, ask Airthings what's my radon level\" - the exact phrasing matters with skills. If it's still not responding, disable and re-enable the skill and re-link your account.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Data Export and Historical Data", "question": "Can I export my Airthings data to a spreadsheet?", "answer": "Yes. Through the Airthings web dashboard at dashboard.airthings.com, you can export your historical readings as a CSV file. This is useful if you want to share the data with a professional or just keep your own records.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Data Export and Historical Data", "question": "How long does Airthings keep my historical data?", "answer": "Airthings stores historical data on its servers as long as your account is active. There's no stated short expiration - most users report having years of historical data available. If you're concerned about long-term storage, you can export it periodically.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Data Export and Historical Data", "question": "I want to show my radon contractor the Airthings data. How do I do that?", "answer": "You can either share your screen in the app, print graphs from the web dashboard, or export a CSV and share that. The export option at dashboard.airthings.com is usually the cleanest way to hand data to a professional.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Data Export and Historical Data", "question": "Does the Airthings Wave store data on the device itself or only in the cloud?", "answer": "Both. The device records locally, and when synced via Bluetooth (or Hub), that data goes up to the Airthings cloud. If you sync regularly, the cloud has a full record. If you miss syncs, the device holds the data until the next connection.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Subscription and Cost Questions", "question": "Does the Airthings app require a subscription?", "answer": "No subscription is required for core features. The app is free, and basic monitoring, history, and alerts are all included at no cost. Airthings has offered optional premium features for a fee, but the fundamental radon monitoring experience doesn't need it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Subscription and Cost Questions", "question": "Is there a monthly fee to use Airthings?", "answer": "Not for the standard home monitoring features. You buy the device and use the app for free. Some commercial or advanced features have associated costs, but residential users generally don't encounter those.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Subscription and Cost Questions", "question": "Does Airthings charge for cloud storage of my data?", "answer": "No, basic cloud storage of your device history is included with the free account. You don't pay ongoing fees to store your readings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Subscription and Cost Questions", "question": "I heard Airthings has a subscription tier. What does it add?", "answer": "The details have changed over time, but premium tiers have typically offered things like extended historical data, more detailed analytics, or multi-location management. For a typical homeowner monitoring one home, the free tier is usually sufficient.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Warranty", "question": "What is the Airthings warranty?", "answer": "Airthings generally offers a two-year warranty on their consumer devices. The warranty covers manufacturing defects. For current warranty specifics, check the Airthings website or your product documentation since terms can vary by product and region.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Warranty", "question": "My Airthings stopped working after a year. Is it still under warranty?", "answer": "If it's within the warranty period (typically two years for Airthings consumer products), contact Airthings support. They'll walk you through troubleshooting and, if the device is defective, arrange a replacement. Have your purchase information ready.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Warranty", "question": "Where do I contact Airthings support if my device is broken?", "answer": "Go to airthings.com and look for the support or help section. They have a support portal, email contact, and documentation. For warranty claims, you'll typically need your proof of purchase and serial number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Questions from Family Members and Non-Technical Users", "question": "My parents have an Airthings but they don't have a smartphone. Can they use it?", "answer": "The Corentium Home is the best fit for people without smartphones - it has a built-in screen and requires no app, no phone, and no internet connection. If they already have a Wave Radon (which needs an app), you could set it up from your phone and then use the Hub to keep it synced so you can check it remotely on their behalf.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Questions from Family Members and Non-Technical Users", "question": "My grandmother lives alone and I bought her an Airthings. Can I monitor it from my phone without being at her house?", "answer": "Yes, if you set up the device on your Airthings account and add a Hub (or use a Wi-Fi connected device like the View Radon), you can see her readings from anywhere through the app. You can also set alerts so you get notified if levels get high. This is actually a really practical use case.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Questions from Family Members and Non-Technical Users", "question": "My dad has been using his Airthings for a month and the reading says 5.1. He's not sure if he should be worried.", "answer": "At 5.1 pCi/L on a month-long average, that's above the EPA's 4.0 pCi/L action guideline - that's the threshold where they recommend taking action. He should get a professional assessment and look at a mitigation system. It doesn't mean anyone has been harmed, but it does mean the issue is real and worth fixing. Give us a call and we can talk through the next steps.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Questions from Family Members and Non-Technical Users", "question": "My aunt asked me what her Airthings number means. It says 2.7 on the long-term average.", "answer": "At 2.7 pCi/L, she's in the range where the EPA says the risk is lower but real. It's not at the 4.0 threshold where they recommend action, but it's above the national average. The honest answer is that it's worth keeping an eye on, and if she's concerned or thinking about home improvements anyway, looking into mitigation wouldn't be a bad idea. It's not a number that requires urgent action.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Questions from Family Members and Non-Technical Users", "question": "My neighbor has an Airthings and showed me a reading of 0.4. Is that real?", "answer": "Yes, 0.4 pCi/L is a very low reading - well below the national average of about 1.3 pCi/L. Depending on the geology of the area and the construction of the house, some homes genuinely run that low. It's a good result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Questions from Family Members and Non-Technical Users", "question": "My sister called me panicking because her Airthings suddenly hit 12 pCi/L. What should I tell her?", "answer": "Tell her to take a breath. One high reading doesn't mean disaster, especially if it's a short-term spike. Weather events, pressure changes, or even opening and closing parts of the house can temporarily push radon up. She should look at the long-term average in the app - if that's also high, it's time to take action. If the long-term average is still in a lower range, it was likely a temporary event. Either way, getting a professional test done would give her a clearer picture. She can call us and we can help her figure out the next step.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Questions from Family Members and Non-Technical Users", "question": "I set up my mom's Airthings Wave and now she keeps waving at it and asking why it's green but the app shows 3.4. How do I explain this to her?", "answer": "The LED color system uses certain thresholds that may be set slightly different from what she expects, and the color might be reflecting a different time window than the long-term average in the app. At 3.4 pCi/L, she's in the zone where the EPA says it's worth considering mitigation - not urgent action, but worth thinking about. The app number is more reliable than the LED color for detailed decision-making.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Questions from Family Members and Non-Technical Users", "question": "My brother-in-law thinks his Airthings is defective because it gives different numbers every day. How do I explain that radon naturally changes?", "answer": "Radon levels in a home naturally fluctuate day to day and even hour to hour. This happens because radon seeps up from the soil and the amount that enters the house changes with barometric pressure, temperature differences between inside and outside, wind, and whether windows are open. The monitor isn't broken - it's accurately recording the natural variation. The long-term average is what smooths all of that out.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Troubleshooting and Edge Cases", "question": "I moved my Airthings to a different room. Will it give accurate readings right away?", "answer": "When you move the monitor, give it a few days to adjust. The readings in a new location may be different from where it was before, which is expected. The long-term average will take time to reflect the new location.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Troubleshooting and Edge Cases", "question": "My Airthings is showing higher readings since I closed up the house for winter. Is that normal?", "answer": "Yes, very normal. In winter, houses are sealed tighter, ventilation decreases, and radon that enters has less opportunity to escape. It's one of the most common reasons people see radon levels rise - and one of the reasons EPA testing guidelines recommend doing tests in closed-house conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Troubleshooting and Edge Cases", "question": "I opened all my windows for a week and now my Airthings is showing very low numbers. Is that the real reading?", "answer": "Opening windows significantly lowers indoor radon levels by diluting it with fresh outdoor air. That reading reflects what the house is like with open windows, not what it's normally like. For a realistic assessment of your home's radon, the monitor should run with the house in its normal, closed condition - especially for a continuous monitor like an Airthings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Troubleshooting and Edge Cases", "question": "My HVAC system runs a lot and my Airthings readings change when it turns on. Is that connected?", "answer": "Possibly. HVAC systems move a lot of air and can create pressure differences in the house that affect how much radon enters from the soil. Some people see radon readings shift noticeably with the HVAC cycle. This is a real effect and worth noting - if your house runs at significantly higher radon when the system is on, it's useful information for a mitigation professional.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Troubleshooting and Edge Cases", "question": "I have a woodstove and my radon readings spike when I use it. Why?", "answer": "A woodstove creates a large negative pressure in the house - it draws air in to feed the fire. That depressurization can pull radon up from the soil faster than normal, temporarily spiking radon levels. It's a known phenomenon. Running exhaust fans for extended periods causes the same thing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Troubleshooting and Edge Cases", "question": "My Airthings gives a completely different reading from my neighbor's Airthings across the street. Why?", "answer": "Radon levels are highly localized - even adjacent homes can have very different readings depending on how each home was built, foundation type, soil composition beneath each specific house, and whether either home has mitigation. The readings are both valid; they're just measuring different homes on what may be different patches of geology.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Troubleshooting and Edge Cases", "question": "The Airthings app updated and now I can't find some features I used before. What happened?", "answer": "App updates sometimes reorganize menus or change how features are accessed. Check the release notes in the App Store or Google Play for what changed. The Airthings support site also has updated documentation. If a specific feature seems to be missing, it's worth searching the Airthings community forum or contacting their support.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Troubleshooting and Edge Cases", "question": "My Airthings shows a reading of 0.2 pCi/L for months. Can that be right?", "answer": "0.2 pCi/L is at the very low end but possible - some homes in certain geological areas genuinely have very little radon. If you have reason to be skeptical (the house is old, the basement is unfinished, the area is known for radon), you could confirm with a separate test. But very low readings are real for some homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Troubleshooting and Edge Cases", "question": "I unplugged and replugged my Airthings View Radon and now it's showing a spinning wheel. Is it updating?", "answer": "Yes, the spinning wheel typically means the device is booting up, reconnecting to Wi-Fi, or installing a firmware update. Give it a few minutes before worrying. If it stays on the spinning wheel for more than 10-15 minutes, try unplugging and replugging again.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Troubleshooting and Edge Cases", "question": "My Airthings is on an interior wall but my radon readings are higher than I expected. Should I move it?", "answer": "Interior versus exterior wall placement matters less than floor level and proximity to radon entry points. If you're in a basement and readings are high, that reflects the actual radon levels in that space - moving the monitor won't change the radon, just where you're measuring it. Placement on the lowest lived-in level is what's most meaningful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Setup and Pairing Questions", "question": "Do I need to create an Airthings account before or after I pair the device?", "answer": "You'll create the account as part of the pairing process in the app - but it's fine to create the account first. The app will prompt you either way. Just download the app and follow the steps; it's designed to walk you through both.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Setup and Pairing Questions", "question": "I have an older iPhone. Will the Airthings app still work?", "answer": "The Airthings app has minimum iOS requirements that change with updates. If your iPhone is very old (more than several years), you may be running an iOS version the app no longer supports. Check the App Store listing for current requirements, or consider the Corentium Home as a standalone option that needs no phone at all.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Setup and Pairing Questions", "question": "Can I use Android to set up an Airthings Wave and then switch to an iPhone?", "answer": "Yes. As long as you're logging into the same Airthings account, you can switch between Android and iPhone. The data lives in the cloud account, not on the phone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Setup and Pairing Questions", "question": "The Airthings app is asking for location permission. Why does a radon monitor need my location?", "answer": "On Android, Bluetooth Low Energy scanning is technically classified as a location capability by the operating system - it's not that Airthings is tracking your GPS position. Without that permission, Android won't let the app scan for nearby Bluetooth devices. You can grant it just for the app without concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Setup and Pairing Questions", "question": "My Airthings Wave is paired to my phone but my husband's phone can't find it. Does it only work with one phone?", "answer": "The Wave Radon can pair with one phone at a time over Bluetooth, but multiple people can access the data through the shared Airthings account. Have your husband download the app, log into your shared Airthings account (or use the sharing feature to invite him), and he'll see the readings without needing to Bluetooth-pair directly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Setup and Pairing Questions", "question": "I reset my phone and now the Airthings app doesn't remember my device. What do I do?", "answer": "Just re-download the Airthings app, log back into your account, and your device should still appear in your device list. You may need to re-pair via Bluetooth to re-establish the local connection, but the data and device registration in your account should still be there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Setup and Pairing Questions", "question": "Can the Airthings Wave pair with a Bluetooth speaker or other Bluetooth devices at the same time?", "answer": "The Wave Radon uses Bluetooth Low Energy (BLE) - a different mode than what Bluetooth speakers use. It connects to the Airthings app specifically and doesn't interfere with normal Bluetooth audio devices on your phone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Radon Health and Context Questions", "question": "Can radon give me a headache or make me feel sick right away?", "answer": "No. Radon does not cause acute symptoms - headaches, fatigue, sore throat, and similar symptoms are not signs of radon exposure. Radon is a long-term risk: cumulative radiation exposure over years increases the risk of lung cancer. If you're experiencing symptoms, radon is not the cause, and you should talk to a doctor about what might be.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Radon Health and Context Questions", "question": "My Airthings has been red for a week. Could my family have been harmed?", "answer": "Radon risk is cumulative over years of exposure, not something that causes harm from a single week. One week at elevated levels is not a health emergency. The important thing now is to confirm the reading and, if the long-term average is above 4.0 pCi/L, move forward with mitigation. The monitor did its job by alerting you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Radon Health and Context Questions", "question": "Should I be worried about radon even if my Airthings shows a low number?", "answer": "Radon doesn't have a completely \"safe\" level - there's some level of risk at any concentration, just as there's risk at any level of any radiation. The EPA's guidance gives you a practical framework: below 2.0 pCi/L is low risk, 2.0 to 4.0 is worth considering, and 4.0 and above is where they recommend action. A low reading is genuinely good news.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Radon Health and Context Questions", "question": "My doctor mentioned radon and told me to get a test. Is an Airthings monitor good enough?", "answer": "A continuous monitor like an Airthings device gives you very useful long-term data - often more useful than a short-term test kit because it shows patterns over time. However, if you need testing for a specific purpose (like a real estate transaction or a formal mitigation assessment), a professional test may be what's asked for. For general home monitoring and understanding your radon situation, an Airthings monitor is a solid tool.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Radon Health and Context Questions", "question": "I've been living in a house with high radon for five years and just found out. What do I do?", "answer": "Get the house mitigated as soon as you reasonably can - that stops ongoing exposure. For personal health concerns or questions about past exposure, talk to your doctor. Mitigation is very effective at reducing radon to low levels and stopping any further cumulative risk. The past exposure is what it was; the right move now is to cut the ongoing risk off. We can help with the mitigation side of things.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Airthings Wave and App Edge Cases", "question": "My Airthings app isn't showing a graph, just a number. How do I get the graph?", "answer": "Tap on the number or the radon tile in the app - usually tapping through the device detail screen will reveal the graph view. If the graph isn't appearing, the device may not have enough data yet to display one. Give it a day or two.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Airthings Wave and App Edge Cases", "question": "The Airthings app keeps crashing when I open it. What do I do?", "answer": "Try force-closing the app and reopening. If it keeps crashing, update the app to the latest version. If the problem persists, uninstall and reinstall the app - your data is stored in the cloud, so reinstalling won't lose anything.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Airthings Wave and App Edge Cases", "question": "Can I see my Airthings data without my phone? Like on a computer?", "answer": "Yes. Log into dashboard.airthings.com from any computer browser with your Airthings account credentials. You'll see all your device data, history, and graphs there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Airthings Wave and App Edge Cases", "question": "How often does the Airthings Wave Radon take a reading?", "answer": "The Wave Radon uses a passive radon sensor that continuously monitors. It reports an updated reading approximately every hour. The displayed reading in the app reflects the most recent measurement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Airthings Wave and App Edge Cases", "question": "My Airthings reading in the app says \"updating...\" for a long time. Is something wrong?", "answer": "\"Updating\" typically means the app is syncing with the device or the server. If you're right next to the device with Bluetooth on, it should finish quickly. If it takes more than a few minutes, try refreshing the app or toggling Bluetooth off and back on.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Airthings Wave and App Edge Cases", "question": "Does the Airthings Wave Radon work in extreme temperatures? My garage gets very hot in summer.", "answer": "The Wave Radon is designed for indoor residential environments - moderate temperature ranges. Extreme heat (like a hot garage in summer) may affect sensor performance and is outside the intended operating range. For accurate readings, place it in a climate-controlled living space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Airthings Wave and App Edge Cases", "question": "I left my Airthings in the car for a week by accident. Is it ruined?", "answer": "Extreme temperatures in a car (very hot or very cold) can potentially affect the device. Let it come to room temperature, put in fresh batteries, and give it a day of normal operation. If readings seem completely off or it won't respond at all, contact Airthings support.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Airthings Wave and App Edge Cases", "question": "My Airthings Wave Radon has been running for two years. Should I replace it?", "answer": "Airthings recommends checking the sensor lifespan in the app or documentation for your specific model. Some consumer radon sensors have a rated lifespan after which accuracy may degrade. The app or Airthings support can tell you the expected life of your specific device.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Airthings Wave and App Edge Cases", "question": "Does the Airthings Wave Radon need to be recalibrated?", "answer": "Consumer radon monitors like the Airthings don't typically require user-performed recalibration. Airthings uses factory calibration. Some models may receive calibration updates through firmware. If you're concerned about accuracy drift after extended use, check the device's rated sensor lifespan.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Airthings Wave and App Edge Cases", "question": "My Airthings app is in a language I don't understand after an update. How do I change it?", "answer": "The Airthings app typically follows your phone's language setting. Go into your phone's settings and check the language, or look for a language option in the Airthings app settings menu.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Comparing Airthings to Other Options", "question": "Is an Airthings monitor as accurate as a professional radon test?", "answer": "Consumer continuous monitors like Airthings give you a good ongoing picture of your home's radon and are useful for long-term monitoring. Professional tests using certified methods have specific accuracy requirements and may be required for real estate or formal documentation. For understanding whether your home has a radon issue, a well-placed Airthings monitor that's been running for several weeks is genuinely informative. For formal testing purposes, a professional test is the standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Comparing Airthings to Other Options", "question": "My real estate agent said an Airthings reading doesn't count for the home inspection. Is that true?", "answer": "For the purpose of a formal real estate transaction, the parties typically require a test conducted by a certified professional using approved methods. An Airthings continuous monitor is excellent for home awareness but isn't a substitute for a certified test in most real estate contexts.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Comparing Airthings to Other Options", "question": "I have an Airthings and a cheap test kit from the hardware store. They're giving me very different readings. Which do I trust?", "answer": "Short-term passive test kits (the ones you hang for 48-96 hours) capture a very narrow window and can be heavily influenced by conditions during that specific period. If the Airthings has been running for weeks and the long-term average is significantly different from the test kit result, the Airthings long-term reading probably gives a better picture of what the home is actually like. When in doubt, a professional test provides a useful third data point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Comparing Airthings to Other Options", "question": "My neighbor has a different brand radon monitor and it shows a different number than my Airthings in his house. Which is right?", "answer": "Different monitors use different sensor technologies and sampling methods, and they may be placed in different spots in the house. Some variation between devices is expected. If both are showing readings in the same general range - say both in the 3-4 pCi/L range - they're probably both telling a similar story. Large discrepancies in the same location at the same time would be worth investigating.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Comparing Airthings to Other Options", "question": "How do I update the firmware on my Airthings Wave?", "answer": "Firmware updates for Bluetooth devices like the Wave Radon are typically pushed automatically when the device syncs with the app. Make sure the app is up to date, and the next time you sync, any available firmware update should install. You generally don't need to do anything manually.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Comparing Airthings to Other Options", "question": "My Airthings app says there's a firmware update. Should I install it?", "answer": "Yes, firmware updates generally improve performance, fix bugs, or improve sensor accuracy. Installing them is recommended. Make sure your phone stays close to the device and the app stays open during the update.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Comparing Airthings to Other Options", "question": "Can I delete my Airthings account?", "answer": "Yes, you can request account deletion through the Airthings app or support portal. This will remove your account and associated data. If you're just switching phones or removing a device, you don't need to delete the whole account - just log in on your new device or remove the specific device.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Comparing Airthings to Other Options", "question": "I want to start over with a fresh Airthings account. Do I need to create a new email address?", "answer": "You can delete your existing Airthings account and create a new one with the same email address, or use a different email. If you just want a fresh start with the device data, resetting the device and removing it from your account is sufficient without deleting the whole account.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Comparing Airthings to Other Options", "question": "My Airthings app shows a \"cloud error.\" What does that mean?", "answer": "A cloud error usually means the app can't reach Airthings' servers - either because your internet connection is down or there's a temporary server issue on Airthings' end. Check that your phone has internet access. If your connection is fine, try again in a few minutes. Airthings server outages are rare but do happen occasionally.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "We just had a new baby and I want to make sure the nursery is safe. Should I put the Airthings there?", "answer": "If the nursery is on the main floor or above and not the lowest level of the home, it's not typically the priority placement - radon enters from below and levels are usually highest in basements. Even so, you can certainly add a monitor to the nursery for peace of mind. The most important measurement is in the lowest level where people spend time regularly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "I'm buying a house and the seller has an Airthings that shows low readings. Should I trust that?", "answer": "It's worth knowing, but for a real estate purchase you'd want your own test done - ideally a professional test conducted specifically for the transaction. The Airthings data is interesting context, but you can't verify where it was placed, how long it's been running, or whether it's functioning properly without your own independent check.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "We're renovating our basement. Should I move the Airthings during construction?", "answer": "Construction can affect radon readings significantly - opening up the floor, disrupting soil, changing airflow. Moving the monitor to a different level during heavy basement work and then returning it afterward makes sense. The readings during active construction won't represent normal conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "I just installed a radon mitigation system and my Airthings still shows 3.2 after two weeks. Did the system not work?", "answer": "Give it more time. After a new mitigation system is installed, radon levels can take a few weeks to fully stabilize in the new equilibrium. Also, the long-term average in the Airthings takes time to reflect recent improvements - it's weighted toward older readings. If after 30 to 60 days the long-term average is still above 4.0, the system may need adjustment. Let us know and we can take a look.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "My Airthings shows 1.2 before we started mitigation and 0.8 after. Is that good?", "answer": "Yes - a reduction from 1.2 to 0.8 is a positive sign, though both numbers are below the concern threshold to begin with. If your pre-mitigation readings were higher and have dropped, that's the mitigation doing its job.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "I put the Airthings in the crawlspace. Is that where it should be?", "answer": "No - most Airthings consumer devices aren't designed for crawlspace conditions, and the relevant measurement for health purposes is in the living space, not the crawlspace itself. Place it in the lowest lived-in floor of your home. The crawlspace may be where radon enters, but the bedroom or family room is where your family is exposed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "My Airthings is mounted near a window. Could that affect the reading?", "answer": "Yes - being close to a window that opens regularly can show lower readings when the window is open and higher when it's closed, because the fresh air dilutes the radon near the sensor. Place the monitor away from windows, doors, and exterior walls for readings that better represent your actual living environment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "I have two floors. Should I put the Airthings on the first floor or the basement?", "answer": "The basement, if it's a lived-in space. Radon levels are almost always higher in the basement and ground floor than upper floors. The basement is where you want to know what's happening. If your basement is unfinished storage and no one spends time there, the first floor is the practical choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "My Airthings has been at 4.5 pCi/L for three months. I keep hoping it'll come down on its own. Will it?", "answer": "Radon levels in a given home reflect the home's construction and the radon source beneath it - they don't go away on their own. Three months at 4.5 pCi/L is a stable pattern that tells you the house has a genuine radon issue. Mitigation is the answer. Give us a call and we can talk through what that looks like for your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "My Airthings just hit 10 pCi/L. My family has been living here for seven years. I'm scared.", "answer": "I understand the fear, and I want to be straightforward with you: that's a high level and worth taking seriously. But radon risk is cumulative over many years, and the right response now is to fix the problem - not to panic about what's already happened. Get mitigation done as soon as you can, talk to your doctor if you have specific health concerns, and know that mitigation is highly effective at bringing levels down. We can help with the evaluation and next steps.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "The Airthings app is telling me to \"take action\" but I don't know what that means. What am I supposed to do?", "answer": "\"Take action\" in the app means your radon readings have crossed a threshold where the EPA recommends doing something about it - typically 4.0 pCi/L or above. The practical steps are: confirm the reading is real (not just a short-term spike) by looking at the long-term average, then contact a radon mitigation professional to evaluate the home. We can help with that - just give us a call or fill out the form on our website.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "I showed my Airthings reading to my landlord and he said the monitor is wrong. Is that possible?", "answer": "Airthings monitors are generally reliable for consumer use, but it's fair for a landlord to want a second opinion with a certified test. If the long-term average has been consistently elevated over several weeks, the probability of a calibration error being that persistent is low. You could suggest a professional test as a neutral third-party verification.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "My Airthings reading went down after I got new windows installed. Is that related?", "answer": "New windows that seal better could reduce some of the negative pressure that draws radon in, but this isn't a reliable mitigation strategy. It may cause a modest reduction in some homes. If the reading is still elevated after new windows, the underlying radon source hasn't changed - you'd still need proper mitigation to address it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "I live in a single-story house on a slab. Where do I put the Airthings?", "answer": "On the main floor, away from windows and exterior walls. In a slab-on-grade home, the main floor is the lowest lived-in level, and radon can still enter through the slab. Place it in a bedroom or frequently used living space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "My Airthings is showing different numbers every time I check. Is that just how it works?", "answer": "Yes. Radon levels naturally fluctuate, and the Airthings refreshes its reading periodically. What you're seeing is the sensor accurately tracking those changes. Look at the trend lines in the graph rather than individual point readings - that's where the meaningful pattern shows up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "My Airthings says the radon is 0.9. My brother says anything under 2.0 is perfect and I don't have to think about it anymore. Is he right?", "answer": "0.9 pCi/L is a genuinely low reading - well below the national average and well below any action threshold. Your brother isn't wrong that this is a good result. No radon level carries absolutely zero risk, but at 0.9 pCi/L, radon is not a meaningful concern in your home. Let the monitor keep running and check on it periodically.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "Someone told me Airthings monitors aren't EPA-certified. Does that mean they're useless?", "answer": "EPA certification (specifically AARST/NRPP certification) is a standard for professional testing services and devices used in formal assessments. Consumer continuous monitors like Airthings are not in that certification category, but they're still useful and generally accurate tools for residential monitoring. For decisions about mitigation in your own home, they provide real information. For a formal test result required in a transaction or legal context, a certified professional test is the appropriate tool.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "My Airthings has been running for a year. The long-term average is 3.7 pCi/L. What does that mean for me?", "answer": "It means radon in your home is in the range where the EPA says it's worth considering mitigation. At 3.7 pCi/L, the risk is real - lower than at 4.0 pCi/L or above, but not negligible. Many people with readings in this range choose to mitigate, and we think that's a reasonable call. At minimum, it's worth having a professional look at the house. We're happy to talk through it - just give us a call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "What happens to my Airthings data if Airthings goes out of business?", "answer": "That's a fair question with any cloud-connected device. Downloading your historical data as a CSV from the web dashboard periodically is a good practice if you want to keep your records regardless of what happens to the service.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Real-World Scenarios", "question": "I turned my heat on for the first time this fall and my Airthings reading jumped from 1.3 to 4.1 in two days. Normal?", "answer": "Very common in fall. When you close the house up and start running heat, you change the pressure dynamics significantly - the house becomes more sealed and negative pressure from heating pulls more radon up from the soil. The jump you're seeing is real, not a sensor glitch. Let it run for two to three weeks and see where the long-term average settles. If it stays above 4.0, that's worth taking seriously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Placement and Environment", "question": "Can I put my Airthings monitor in a closet?", "answer": "A closet isn't ideal - air in a closed closet doesn't circulate well and may not represent what the rest of the room is like. Put it somewhere with normal room air circulation, like a bedroom wall or a shelf in a frequently used space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Placement and Environment", "question": "My basement is half finished. Should I put the Airthings in the finished part or the unfinished part?", "answer": "Put it in the finished part - that's the space people actually occupy, so it reflects real exposure. The unfinished portion may have higher levels since it's closer to the soil, but the living area is what matters for your family's day-to-day exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Placement and Environment", "question": "Can the Airthings be mounted horizontally on a ceiling?", "answer": "The Airthings Wave is designed for vertical wall mounting. Mounting it sideways or on the ceiling isn't recommended and could affect airflow to the sensor. Stick with wall mounting at the recommended height.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Placement and Environment", "question": "Should I put the Airthings near the floor or up on the wall?", "answer": "Between about two and five feet from the floor is the Airthings guideline. Don't put it directly on the floor - radon concentrations can vary within the room and near-floor placement isn't standard. Mid-wall height is the sweet spot.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Placement and Environment", "question": "Is it okay to put the Airthings behind a piece of furniture?", "answer": "Try to avoid it. The sensor needs to sample room air freely. A tight space behind a bookcase or dresser may restrict airflow and give you a reading that doesn't reflect the broader room. Give it at least a few inches of open space on all sides.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Placement and Environment", "question": "Does the Airthings need to be on a wall, or can I put it on a bookshelf?", "answer": "A bookshelf works. The key is that it's not pressed against anything, not in an enclosed space, and not right next to a door, window, or vent. A shelf in an open area of the room is fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Placement and Environment", "question": "My house has a walkout basement. Does radon still matter there?", "answer": "Yes. Walkout basements still have at least some below-grade walls and floor area in contact with soil, and radon can still enter. The risk may be somewhat lower than a fully buried basement, but it's not eliminated. It's worth monitoring and measuring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Placement and Environment", "question": "I put my Airthings in the garage attached to the house. Is that useful?", "answer": "The garage is generally not the right place for a residential radon monitor. Garages have very different air circulation patterns and aren't living spaces. Put it inside the home in a regularly occupied room.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Placement and Environment", "question": "My house is on a pier-and-beam foundation, not a slab or basement. Do I still need to worry about radon?", "answer": "Radon can still enter pier-and-beam homes through the crawlspace below. Levels may be different than in basement homes but are not necessarily lower. If the crawlspace is open under the house, radon from the soil can migrate up. Monitoring is still worthwhile.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Placement and Environment", "question": "I live in an apartment on the 10th floor. Should I bother with an Airthings?", "answer": "Radon levels in high-rise apartments are typically very low - radon dissipates as it travels upward and the outdoor air that enters at upper floors dilutes it. Monitoring is not really a concern above the first floor or two in most multi-story buildings. Ground-floor and basement apartments are a different story.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Placement and Environment", "question": "Does radon get worse in the summer or winter?", "answer": "Radon levels are often higher in winter in most of the US. Houses are more sealed up, and temperature-driven stack effect (warm air rising out of the house and pulling soil air up to replace it) tends to increase in winter. Even so, local conditions vary and some homes see elevated levels in summer too. A continuous monitor like an Airthings captures this seasonal variation over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Notifications and Settings Deep Dive", "question": "How do I turn off Airthings notifications? They're annoying me.", "answer": "In the Airthings app, go to settings and find the notification or alerts section. You can turn off push notifications there, or raise the threshold so you only get notified at higher levels. You can also go into your phone's system settings and turn off notifications for the Airthings app entirely.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Notifications and Settings Deep Dive", "question": "I keep getting a \"low battery\" notification from Airthings but I just replaced the batteries. Why?", "answer": "This occasionally happens if the app didn't properly register the fresh batteries right away. Give it a day and see if the notification clears. If it persists, removing and reinserting the batteries and then syncing the app should reset the battery reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Notifications and Settings Deep Dive", "question": "Can I customize what the Airthings app shows on the main screen?", "answer": "The Airthings app has some customization options for the dashboard, though they're fairly basic for consumer devices. You can typically choose which metrics are shown and rearrange tiles. Check the app settings - the options available depend on your device model and app version.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Notifications and Settings Deep Dive", "question": "Does the Airthings app remember my alert settings if I reinstall the app?", "answer": "Alert and threshold settings are stored in your Airthings account, not just on the phone. If you reinstall the app and log back in, your settings should come back. If they don't appear, check the device settings in the app and reconfigure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Notifications and Settings Deep Dive", "question": "Can I set the Airthings app to show readings in Bq/m³ instead of pCi/L?", "answer": "Yes. The Airthings app lets you switch between pCi/L (used in the US) and Bq/m³ (used in most other countries). This setting is usually in the app preferences or account settings. 1 pCi/L equals 37 Bq/m³, so the numbers look very different but represent the same measurement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Notifications and Settings Deep Dive", "question": "What does Bq/m³ mean on my Airthings app?", "answer": "Bq/m³ stands for becquerels per cubic meter - it's the European measurement unit for radon. If your app is showing readings in the hundreds, it may have been switched to Bq/m³ instead of pCi/L. The WHO guideline is 100 Bq/m³, and the EPA action level of 4 pCi/L equals 148 Bq/m³.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Notifications and Settings Deep Dive", "question": "How do I change the Airthings app language?", "answer": "The app follows your phone's language setting by default. Change the phone language in system settings, then restart the app. If there's an in-app language option, it'll be in the account or settings menu.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings App - Notifications and Settings Deep Dive", "question": "Can I see a summary of my monthly radon averages in the Airthings app?", "answer": "The Airthings app and web dashboard both offer extended graph views that can show monthly trends. On the web dashboard in particular, you can look at data over a year or more and get a sense of how your levels vary by season.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Device Models - Quick Comparison Questions", "question": "What's the cheapest Airthings radon monitor?", "answer": "The Airthings Corentium Home is typically the most affordable entry point for radon-only monitoring. It has a built-in display and no app required, which also makes it the simplest option for less tech-savvy users.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Device Models - Quick Comparison Questions", "question": "What's the difference between all the Airthings models? There are so many.", "answer": "The main family lines are: the Corentium Home (standalone display, no app needed), the Wave series (Bluetooth-connected, no screen, uses the app, with the Wave Radon for radon only and Wave Plus for multiple air quality sensors), and the View series (Wi-Fi connected with an on-device display). Within each line there are updated versions. For basic home radon monitoring, the Wave Radon or Corentium Home are the go-to choices.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Device Models - Quick Comparison Questions", "question": "Does the Airthings Wave Mini measure radon?", "answer": "No. The Wave Mini measures temperature, humidity, and VOCs - it does not include a radon sensor. Don't confuse it with the Wave Radon or Wave Plus.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Device Models - Quick Comparison Questions", "question": "I got an Airthings Wave Mini thinking it would measure radon. What do I do?", "answer": "The Wave Mini is an air quality monitor but doesn't detect radon. You'd need a Wave Radon, Wave Plus, Corentium Home, or another Airthings model that includes the radon sensor. Check the product packaging or Airthings website before buying - the radon sensor is a specific feature, not in every model.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Device Models - Quick Comparison Questions", "question": "Is the Airthings View Plus worth it over the View Radon?", "answer": "If you want a wall-mounted display that shows radon plus CO2, VOC, temperature, and humidity - and you have Wi-Fi - the View Plus is a more complete picture. If radon is all you care about, the View Radon does that job without extra complexity.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Device Models - Quick Comparison Questions", "question": "Does Airthings make a commercial radon monitor for offices or schools?", "answer": "Airthings has a Business line aimed at commercial and professional use cases - the Airthings for Business products. The consumer Wave and Corentium Home products are designed for residential use. For a school or office, the Business line may be more appropriate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Device Models - Quick Comparison Questions", "question": "What is the Airthings Space CO2 and does it do radon?", "answer": "The Airthings Space CO2 is aimed at commercial/office air quality monitoring and focuses on CO2 - it's not a radon device. For radon specifically, the consumer Wave and Corentium products are the right line.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Hub - Deep Dive", "question": "Where do I plug in the Airthings Hub?", "answer": "The Hub plugs into a standard power outlet via USB and connects to your home Wi-Fi. It acts as a bridge between your Bluetooth Airthings devices and the internet. Place it within Bluetooth range of your monitors - same floor, reasonably close.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Hub - Deep Dive", "question": "How many devices can one Airthings Hub support?", "answer": "The Airthings Hub can support multiple Bluetooth devices - typically enough to cover a typical home with several monitors. Check the current Airthings Hub product page for the specific limit, as it can vary with firmware updates.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Hub - Deep Dive", "question": "If I have an Airthings Hub, do I ever need to sync with my phone?", "answer": "With a Hub, syncing happens automatically - your devices stay connected to the cloud without your phone needing to be nearby. You'd only need to open the app to view data, change settings, or set up alerts.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Hub - Deep Dive", "question": "Does the Airthings Hub need to be near the router or near the monitors?", "answer": "Near the monitors - that's what matters most. The Hub communicates with your monitors over Bluetooth and with the internet over Wi-Fi. As long as Wi-Fi signal reaches the Hub's location and the Hub is within Bluetooth range of the monitors, placement is flexible.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Hub - Deep Dive", "question": "My Airthings Hub is offline in the app. What do I check?", "answer": "Check that it's plugged in and that your Wi-Fi router is working. The Hub shows up in the app as a device - if it shows offline, try unplugging it for 30 seconds and plugging it back in. If your Wi-Fi network name or password changed recently, the Hub will need to be reconfigured to connect to the updated network.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Hub - Deep Dive", "question": "Do I need a Hub for every floor of my house?", "answer": "You need the Hub to be within Bluetooth range of the monitors it's serving. In most homes, one Hub in a central location can reach monitors on multiple floors. In very large homes or thick-walled construction, you might need two Hubs to cover all monitors reliably.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings Hub - Deep Dive", "question": "Can I use the Airthings Hub with the Corentium Home?", "answer": "The Corentium Home doesn't have Bluetooth connectivity (except the Corentium Home 2), so the Hub doesn't work with the original Corentium Home. The Hub is designed for the Bluetooth-enabled Wave series and similar devices.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings and Real Estate Questions", "question": "The sellers say their Airthings has always shown low readings. Should I just trust that?", "answer": "You can note it as context, but for a real estate transaction, get your own independent test done. Placement, calibration state, how long the device has been running, and other factors all matter. Your own test gives you a baseline you can trust.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings and Real Estate Questions", "question": "Should I turn off the Airthings during a home inspection?", "answer": "No. For a radon monitor to be useful, it needs to be running with the house in normal closed conditions. Turning it off defeats the purpose. If a home inspector wants to see the radon data, the Airthings reading is useful context - though for a formal test result, a certified test is the standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Non-Technical User Questions", "question": "My elderly father lives alone. I want him to be able to check radon without needing any technology. What do I buy him?", "answer": "The Airthings Corentium Home. It has a large, clear digital display, runs on batteries, and shows radon readings without any phone, app, Wi-Fi, or Bluetooth pairing. He just puts in the batteries and reads the screen. It's by far the simplest option for someone who doesn't use smartphones.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Non-Technical User Questions", "question": "My mom got an Airthings as a gift and doesn't know what pCi/L means. How do I explain it to her?", "answer": "Tell her it's just a measurement of how much radon gas is in the air - like how temperature is measured in degrees. The number that matters is the long-term average on the screen or in the app. Below 2.0 is a good result. Between 2.0 and 4.0 is a \"keep an eye on it\" zone. At or above 4.0 is where the EPA says it's time to do something about it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Non-Technical User Questions", "question": "My parents' Airthings shows 6.1 and they've been in that house for 20 years. Should I say something to them?", "answer": "Yes - and frame it practically, not to cause panic. Six years of elevated radon is a cumulative exposure concern, and the right response now is to get the house mitigated. That stops ongoing exposure going forward. You can also suggest they mention it to their doctor as part of normal health context, though a doctor can't undo past exposure, only provide guidance on risk. The most important thing is fixing the house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Non-Technical User Questions", "question": "I set up an Airthings for my in-laws remotely. They're not tech people and can't navigate the app. Is there any way I can check their readings without them doing anything?", "answer": "Yes. Set up the device on your own Airthings account (or use the sharing feature), and use the Airthings Hub to keep it synced to the cloud. That way, you can check their readings from your phone without them doing anything after the initial setup.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Non-Technical User Questions", "question": "My teenage kid set up the Airthings and now I don't know how to read it. What's the most important number?", "answer": "The long-term average. That's the number in the app (or on the Corentium Home screen) that reflects what the house is consistently like, smoothed out over weeks or months. A single day's reading can bounce around - the long-term average is what tells you whether you have a real issue.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "More Non-Technical User Questions", "question": "My family doesn't want to hear about radon but the Airthings keeps showing red. How do I explain why it matters?", "answer": "Radon is the second leading cause of lung cancer in the US after smoking. Unlike many environmental risks, it's invisible and odorless - and unlike many health problems, there's a concrete fix. Red on the Airthings means levels are high enough that the EPA recommends action. The fix is a mitigation system - a vent pipe and fan that usually solves the problem. It's not something to argue about; it's something to fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings After Mitigation", "question": "After mitigation, how long should I wait before trusting the Airthings reading?", "answer": "Give it at least two to four weeks for the long-term average to begin reflecting post-mitigation levels. The long-term average is weighted toward historical data, so it takes time to shift. After 30 to 60 days of monitoring with the mitigation system running, you'll have a reliable picture of what the mitigation achieved.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings After Mitigation", "question": "My Airthings long-term average dropped from 5.8 to 1.4 after mitigation. Is that normal?", "answer": "That's a great result. Dropping from 5.8 to 1.4 pCi/L is exactly what a well-functioning mitigation system should do. That's the system working as designed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings After Mitigation", "question": "Do I still need to monitor with Airthings after a mitigation system is installed?", "answer": "Yes - ongoing monitoring is a good idea. Mitigation systems work well, but they're mechanical systems with fans that can fail or degrade over time. Continuing to monitor lets you catch any future problems before levels climb back up. Think of it as the same reason you keep a smoke detector even after you've fixed an electrical issue.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings After Mitigation", "question": "My Airthings went from 4.5 to 0.5 right after mitigation was installed. That seems too good to be true.", "answer": "It's not too good to be true - mitigation systems can drop radon levels very rapidly. The 0.5 pCi/L reading in the first few days is likely real. What you're watching for over the next month is whether that low level holds as the long-term average adjusts. If it stabilizes in the sub-2.0 range, that's a success.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings After Mitigation", "question": "My contractor says I don't need to monitor after mitigation. Is that right?", "answer": "Monitoring after mitigation is the responsible approach. Most mitigation professionals recommend ongoing monitoring because it confirms the system is working and catches any future changes. The contractor may mean that an immediate post-mitigation test isn't required for the job to be done - but keeping your Airthings running long-term is still a good idea.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings After Mitigation", "question": "The radon system installer said my Airthings isn't accurate enough to use for post-mitigation verification. Is that true?", "answer": "For formal post-mitigation verification - the kind you'd use to document compliance or complete a real estate transaction - a certified test is the standard. For your own peace of mind and ongoing monitoring, the Airthings is genuinely useful and gives you continuous data that a one-time test can't provide. The two serve different purposes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Airthings After Mitigation", "question": "I have a mitigation system but forgot to turn on the fan for a few weeks. My Airthings is back up to 4.8. What happened?", "answer": "The fan is what makes the mitigation system work. Without it running, radon will build back up. Turn the fan back on and give it a week or two - levels should come back down if the system is otherwise functioning properly. If you've been running the fan and levels are still high, something may have changed with the system and it should be inspected.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0236", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Can I use my Airthings to see if opening windows helps my radon levels?", "answer": "Yes. That's actually a practical experiment you can run. Monitor your long-term average with normal closed-house conditions, then open windows for a period and watch how the 24-hour reading responds. You'll likely see levels drop significantly with windows open. This demonstrates the effect but isn't a mitigation strategy - you can't run with open windows in winter.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0237", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "My Airthings has been in the same spot for two years. Do I need to move it or do anything different?", "answer": "Not necessarily. Continuing to run it in the same location gives you the most consistent long-term data. If you want to understand radon on a different floor or in a different part of the house, you could move it temporarily. But for ongoing awareness, consistent placement is valuable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0238", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Does the Airthings app have dark mode?", "answer": "The Airthings app supports the dark/light mode setting on your phone - it will follow your system preference on most recent versions. Check your phone's display settings if you want to switch.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0239", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Can I name my Airthings device something custom in the app?", "answer": "Yes. In the device settings in the Airthings app, you can give each device a custom name. This is useful if you have multiple monitors in different rooms or locations.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0240", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "My Airthings device name in the app says \"Wave Radon\" but I have two. How do I tell them apart?", "answer": "Give each one a custom name in the app settings - \"Basement Bedroom\" and \"First Floor,\" for example. That way the dashboard is easy to read at a glance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0241", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "I have the Airthings app but it's not showing the radon sensor tile for my Wave Plus. Why?", "answer": "Check that the device was added and paired correctly. If the device is paired but the radon tile isn't showing, try refreshing the app or checking for a firmware update on the device. In rare cases, removing and re-adding the device clears display glitches.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0242", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Does the Airthings app have a widget for the home screen on my iPhone or Android?", "answer": "Airthings has offered home screen widgets on some versions of the app for both iOS and Android. Widget availability can change with app updates - check the current app version for widget options.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0243", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Can I control my Airthings from an Apple Watch?", "answer": "Airthings doesn't have a dedicated Apple Watch app, but some smart home integrations that include Airthings may be accessible from a watch via third-party apps or Siri shortcuts. It's not a native Airthings feature.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0244", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "My Airthings app is showing the wrong location for my device. Does location matter?", "answer": "The location shown in the app is just a label for your own organization - it doesn't affect the radon readings. You can edit the device location name in the device settings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0245", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Can the Airthings app be used by multiple people in different houses?", "answer": "Yes. With the sharing feature, you can add multiple homes and multiple devices to one account, or share access across accounts. A family checking on readings at an elderly parent's house is a common use case.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0246", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "How do I know if my Airthings is connected to the Airthings Hub versus my phone?", "answer": "In the app, the device status will usually show whether it's syncing via Hub or Bluetooth. If you have a Hub, the device should show as online even when your phone isn't home - that's the clearest sign the Hub is doing its job.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0247", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Does the Airthings Hub work if my internet goes out?", "answer": "If your internet goes out, the Hub can't sync data to the cloud, but the monitors themselves keep recording locally. When internet is restored, the Hub catches up with syncing. For the rare case of extended outages, the devices hold data until they can send it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0248", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "My Wi-Fi password changed and now my Airthings Hub is offline. How do I fix it?", "answer": "You'll need to reconfigure the Hub's Wi-Fi settings. This usually involves pressing the Hub's setup button and going through the network connection steps in the Airthings app again with the new password.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0249", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "I moved to a new house. How do I update the location on my Airthings?", "answer": "In the Airthings app, go to device settings and update the name or location. The physical device doesn't know or care where it is - the change is just for your own organization in the app.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0250", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Do I need to buy a new Airthings when I move to a new house?", "answer": "No. Your Airthings device works in any home. Just pack it when you move, set it up in the new location, and it will start building a new baseline for the new house. The historical data from the old house will still be in your account.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0251", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "My Airthings app says the device needs attention. What does that mean?", "answer": "\"Needs attention\" could mean several things: low battery, the device hasn't synced recently, radon levels have triggered an alert, or there's a firmware issue. Tap on the notification or the device in the app to see the specific reason.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0252", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Can I turn off the wave gesture on the Airthings Wave to save battery?", "answer": "The Airthings app doesn't typically offer a setting to disable the wave gesture, and the LED response to waving doesn't use significant power. It's not a meaningful battery drain to worry about.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0253", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "I moved my Airthings Hub to a different outlet and now it won't connect. What do I do?", "answer": "The Hub connects to your Wi-Fi by SSID and password, so moving it to a different outlet shouldn't matter as long as Wi-Fi signal reaches the new location and the monitors are still within Bluetooth range. If it's not connecting, try unplugging for 30 seconds and replugging. If it still won't connect, check that the new location has adequate Wi-Fi signal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0254", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "My Airthings Wave has a blinking light. What does that mean?", "answer": "The Wave Radon can blink during Bluetooth syncing or when a firmware update is in progress. If it's blinking steadily and not during an obvious sync event, check the Airthings support documentation for your specific device - different blink patterns can mean different states.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0255", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Is there any maintenance I need to do on the Airthings besides replacing batteries?", "answer": "Not really. The device doesn't have filters to clean or physical components to maintain. Keep it free of dust buildup around the sensor area. The main maintenance is keeping batteries fresh and keeping the app and firmware updated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0256", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "My Airthings fell off the wall. Is the device ruined?", "answer": "Check for visible damage - cracked housing, loose batteries, or a broken battery compartment. If it looks physically intact, put the batteries back in and let it run. Give it an hour or two and see if it starts reading normally. If the reading is clearly wrong or the device won't respond at all, contact Airthings support.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0257", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "I accidentally dropped my Airthings Wave in water. What do I do?", "answer": "Remove the batteries immediately, let the device dry completely for 24 to 48 hours, then try putting the batteries back in. Consumer electronics that have been wet often have issues even after drying - if it doesn't work normally, contact Airthings support and check your warranty.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0258", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Why is my Airthings app asking me to rate the air quality? I thought it just measured radon.", "answer": "The app may prompt you to log notes about conditions in your home - like whether windows are open or activities happening - to give context to the readings. This is optional. It can be useful for understanding spikes in your history, but you don't have to fill it in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0259", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Does Airthings have a community forum where I can ask questions about my device?", "answer": "Yes. Airthings has a community forum on their website where users post questions and help each other. For device-specific issues, Airthings support is the authoritative source, but the forum can be useful for seeing how others have solved similar issues.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0260", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "The Airthings website is confusing. Where do I find support for my specific device?", "answer": "Go to airthings.com, navigate to \"Support\" or \"Help,\" and search for your specific model name. The Airthings support documentation is organized by product, and most common questions about setup, troubleshooting, and connectivity are covered there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0261", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Is there a phone number for Airthings customer support?", "answer": "Airthings' primary support channel is through their website support portal and email/chat, not a phone line. Check airthings.com/support for current contact options.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0262", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "I registered my Airthings but never got a confirmation email. What should I do?", "answer": "Check your spam or junk folder first. If it's not there, try logging into the Airthings app with the email and password you used - if you can log in, the account was created even without the confirmation email. If you can't log in, try the account creation process again.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0263", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Can I have an Airthings account without giving my real name?", "answer": "The account requires an email address and password. For personal use, Airthings doesn't require much beyond that. How much personal information you provide is up to you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0264", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "My Airthings account was hacked. What do I do?", "answer": "Change your password immediately through the Airthings website. Check if your email account has also been compromised - this is often how account takeovers happen. If you can't access your account, contact Airthings support directly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0265", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Does Airthings sell or share my radon data with third parties?", "answer": "Airthings has a privacy policy that covers how they handle your data. For the specifics, review the Airthings privacy policy at airthings.com. They do note that they may use anonymized data for research or product improvement, but individual data sharing practices are covered in their policy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0266", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "I live in an area with very high natural radon geology. Should I get a more accurate professional monitor instead of Airthings?", "answer": "In high-radon geology areas, getting a professional certified test in addition to running an Airthings monitor is a reasonable approach. The Airthings gives you continuous data and catches changes over time. A certified professional test gives you a formal, accurate baseline. Using both together gives you the most complete picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0267", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Miscellaneous Airthings Questions", "question": "Can radon fluctuate based on the season in a way that would make my Airthings long-term average misleading?", "answer": "Yes - radon levels often have seasonal patterns, and a monitor that's only been running for one season may not represent the year-round picture. Airthings recommends running the monitor for at least 30 days, but a full year of data gives you the most accurate picture of what the home is like across all conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0268", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "I just found out my neighbor had radon mitigation done and it made me nervous. Should I go buy an Airthings today?", "answer": "It's a reasonable thing to do. Radon is local - the fact that your neighbor had elevated levels doesn't automatically mean you do, but it does mean you're in an area where radon is real. Getting a monitor is a low-effort way to know where your home stands. The Airthings Wave Radon or Corentium Home are solid starting points.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0269", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "Is one Airthings monitor enough for a three-story house?", "answer": "For most homes, one monitor in the lowest lived-in level is the standard approach - that's where levels are highest and where mitigation decisions are based. If you want to understand radon throughout the house, adding monitors on upper floors is useful context, but the basement or ground floor is the priority measurement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0270", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "I keep seeing an \"update your app\" banner in Airthings. Do I have to update?", "answer": "You don't have to update immediately, but updates generally fix bugs and improve reliability. Staying on a very outdated version may eventually cause connectivity or display issues. It's a good habit to keep the app reasonably current.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0271", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "My Airthings app just deleted all my history somehow. What happened?", "answer": "If you accidentally removed the device from your account and re-added it, that can break the history association. History that was synced to the cloud should still be there - contact Airthings support with your account information and they may be able to help recover it. Going forward, export your data periodically as a backup.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0272", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "My Airthings app shows the correct radon level but the time stamp seems off. Is something wrong?", "answer": "The app displays timestamps based on your phone's time zone setting. If you recently changed time zones or the phone's clock is off, it can affect how data is labeled. Check your phone's date and time settings to make sure they're set correctly and to the right time zone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0273", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "My Airthings shows 2.2 pCi/L. The EPA says action is needed at 4.0. Am I completely fine?", "answer": "At 2.2 pCi/L, you're in the range where the EPA says the risk is lower but real - not at the action threshold, but above the national average. \"Completely fine\" isn't really how radon works since there's no zero-risk level, but 2.2 is well below where action is recommended. Keep monitoring and if it creeps up toward 4.0 over time, revisit the question.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0274", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "How do I know if the Airthings sensor itself has worn out?", "answer": "Airthings states a sensor lifespan in their product documentation - check the current specs for your model. Some devices have a sensor life indicator in the app. If the device is many years old and readings seem implausibly stable or zero even in conditions where you'd expect variation, the sensor lifespan may be an issue. Contacting Airthings support is the right call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0275", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "My Airthings Wave Plus shows CO2 over 1000 ppm in the bedroom at night. Is that dangerous?", "answer": "CO2 over 1000 ppm is not dangerous - people exhale CO2 in a closed room and it naturally builds up overnight. The concern threshold for CO2 from an air quality standpoint is generally much higher. What it does indicate is that a closed bedroom with multiple people in it isn't getting much fresh air, which can affect sleep quality. Opening a window slightly or improving ventilation can help.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0276", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "I live in a house that was built in 1950. Does age of the house affect radon risk?", "answer": "Older homes can sometimes have more radon entry points - aging foundation cracks, unsealed penetrations, older construction methods without vapor barriers. But radon levels are more determined by the geology under the house than the age of it. New and old homes alike can have high or low radon. The only way to know is to measure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0277", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "My Airthings app sends me weekly summaries. Where do those come from?", "answer": "Airthings sends optional weekly email or in-app summary reports for some account types. If you're getting them, they come from Airthings directly based on your account settings. You can manage those in your account notification preferences.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0278", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "I set up my Airthings three days ago and the reading is 8.0. Should I call someone right now?", "answer": "Don't panic - but don't ignore it either. Three days of data at 8.0 pCi/L is a real signal. At that level the long-term average will likely stay elevated unless there's some unusual condition. Confirm by checking conditions (house closed up, no recent HVAC work or weather event?), give it another week to see where the long-term average settles, and then contact a mitigation professional. At 8.0 pCi/L, this is worth addressing. Give us a call and we can walk through it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0279", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "My family is moving in two weeks and I just found out the radon is 5.5. Can I get a mitigation system installed in two weeks?", "answer": "In many cases, yes - mitigation installations are often scheduled within one to two weeks. Call a local mitigation professional right away. Two weeks is tight but doable if someone has availability. Either way, the reading should be disclosed and addressed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0280", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "Someone at a home show told me you have to do a professional test even if you have an Airthings. Is that true?", "answer": "It depends on the purpose. For your own awareness and home monitoring, the Airthings is the right tool. For formal purposes - real estate transactions, insurance, or documentation - a certified professional test is typically required. The two aren't mutually exclusive, and having both a continuous monitor and a formal test on file is actually a comprehensive approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0281", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "I'm about to have a baby and want to make sure the nursery is not an issue. My Airthings long-term is 3.5 downstairs. What should I do?", "answer": "At 3.5 pCi/L long-term, you're in the zone where the EPA says it's worth considering mitigation - not an emergency, but a real risk that doesn't go away on its own. With a new baby coming, it's a reasonable time to have a professional look at your home and assess whether mitigation makes sense. The peace of mind alone is worth the conversation. Give us a call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-airthings-specific-0282", "phase": "phase3", "type": "answered_qna", "topic": "workflow-airthings-specific", "category": "workflow-airthings-specific", "subtopic": "Final Practical Questions", "question": "Does Airthings have a trade-in program for older devices?", "answer": "Airthings periodically runs promotions that may include trade-in or upgrade deals. Check their website for current offers - this kind of thing changes and isn't something to rely on as a standing program.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/airthings-specific.md", "public": true, "tags": [ "workflow-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - High Radon, Above Action Level", "question": "My mom just got her radon test back and it's 5.8 pCi/L. Is that bad?", "answer": "That's above the EPA action level of 4.0, so yes, it's worth taking seriously. The good news is that 5.8 is very fixable - a properly installed mitigation system typically brings levels well below 2. She doesn't need to panic, but she should get it addressed rather than sitting on it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - High Radon, Above Action Level", "question": "My dad's house tested at 7.2 pCi/L. He says that's not that high. How do I explain to him why he should fix it?", "answer": "The EPA says fix at 4.0 or higher, so 7.2 is nearly double the action level. The core issue with radon is cumulative exposure - the longer someone breathes elevated levels, the higher the lifetime lung cancer risk. At 7.2, fixing it is straightforward and the risk of not fixing it compounds every year. It's worth having that honest conversation with him.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - High Radon, Above Action Level", "question": "My mom found out her radon is 6. She's been living there for 12 years. Should she be freaking out?", "answer": "She shouldn't panic, but she should act. Radon risk is cumulative - it's not like a one-time exposure that causes immediate harm. Twelve years at a level like that does represent meaningful exposure, but the right response is to get a mitigation system in now and stop the accumulation going forward. For concerns about past exposure, that's a conversation for her doctor. The actionable thing she can do today is get it fixed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - High Radon, Above Action Level", "question": "My dad won't fix his radon because he's 75. He says \"I'm too old for it to matter.\" Is that a mistake?", "answer": "It's understandable but not quite right. Even at 75, radon-related lung cancer risk from continued exposure is real - and depending on his health, he could have 10, 15, or more years ahead. A mitigation system also protects anyone else who spends significant time in the home - a spouse, visiting grandkids, caregivers. It's a relatively modest fix for ongoing peace of mind. I'd gently push back on the \"too old to matter\" thinking.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - High Radon, Above Action Level", "question": "My parents tested their house and got 4.5 pCi/L. They said the inspector told them 4 was the limit and they're \"right at it.\" Are they right to think they're borderline fine?", "answer": "They're right at the EPA action level, which means the EPA recommendation is to fix it - not to monitor and wait. There's no magic cutoff where 3.9 is fine and 4.1 is dangerous; the line at 4.0 is just a policy threshold based on where the risk becomes clearly worth addressing. At 4.5, fixing makes sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - High Radon, Above Action Level", "question": "My mom's radon came back at 9.1 pCi/L and she's terrified. What do I tell her?", "answer": "Tell her the number is high and worth fixing right away, but that radon problems at any level are solvable. A mitigation system works by drawing radon out from under the foundation before it enters the living space - it's not complicated, and it works. The fear is appropriate in the sense that this should motivate action, not spiral into panic. The best thing she can do now is call a licensed radon mitigation professional and get the system installed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - High Radon, Above Action Level", "question": "My dad tested his house at 8.6 and refuses to do anything. He thinks radon is a scam. What's the reality?", "answer": "Radon is real, well-documented, and the second leading cause of lung cancer in the U.S. after smoking - the EPA, CDC, Surgeon General, and WHO all say so. The concern isn't invented. At 8.6, his lifetime lung cancer risk from radon is substantially elevated compared to average indoor levels. Whether he acts on that is his call, but the science isn't in dispute.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - High Radon, Above Action Level", "question": "My mom has radon at 5.2 and she's on a fixed income. Is mitigation worth the cost at her level?", "answer": "At 5.2 it's above the EPA action level, so yes, the risk justifies the cost. Mitigation isn't an ongoing expense - it's a one-time installation that continues working for years. If cost is a barrier, it's worth exploring whether her state has any radon assistance programs. But at 5.2, waiting and hoping the level drops on its own isn't a great strategy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - High Radon, Above Action Level", "question": "My parents got a short-term test showing 4.8. Their neighbor got 2.1. Why is there such a difference between houses that are right next to each other?", "answer": "Radon comes from uranium in the soil, which varies significantly even over short distances - the geology underneath two adjacent houses can be completely different. A neighbor's low result tells you nothing about your parents' house, and vice versa. Each house needs its own test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - High Radon, Above Action Level", "question": "My dad thinks he can fix his radon problem by just ventilating the basement. Will that work?", "answer": "Opening windows and running fans can temporarily reduce radon, but it's not a reliable fix. Radon levels fluctuate based on weather, pressure, and season, so what works one day may not work the next. It also doesn't address the source. A proper sub-slab depressurization system creates consistent negative pressure under the foundation and reliably keeps levels low year-round. Ventilation is not a substitute.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - Dismissing or Delaying", "question": "My mom keeps saying she'll deal with the radon \"eventually.\" She's had 6.3 showing on her monitor for two months. How do I get her to act?", "answer": "The risk doesn't pause while she waits. At 6.3, every month is additional cumulative exposure. It might help to frame it practically: mitigation is a one-time thing, it's not disruptive to get installed, and once it's done she doesn't have to think about it again. Sometimes people put things off because they expect it to be a bigger ordeal than it is. It's worth one call to get the facts.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - Dismissing or Delaying", "question": "My dad says he had the house tested years ago and it was fine, so he doesn't need to test again. Is he right?", "answer": "Not necessarily. Radon levels can change over time - cracks in the foundation, settling, changes in HVAC, even changes in soil drainage can all shift levels. A test result from ten or fifteen years ago doesn't warranty current conditions. If he's been there a long time and hasn't retested, a new test makes sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - Dismissing or Delaying", "question": "My mom did a test and the result was 4.1 pCi/L. She's saying it's \"barely over the limit so probably fine.\" Should I push back?", "answer": "Yes, gently. 4.1 is above the EPA action level, and while it's not drastically high, the EPA recommendation is to fix - not to watch and wait. The level won't improve on its own. And the longer she waits, the more cumulative exposure adds up. It's worth getting a quote for mitigation so she can make a real, informed decision rather than hoping it rounds down.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - Dismissing or Delaying", "question": "My dad just keeps saying \"we've lived here for 30 years and we're fine.\" How do I explain that's not how radon risk works?", "answer": "Radon doesn't cause symptoms - there's no sore throat, no headache, no warning sign while exposure is happening. The damage is accumulated over time and shows up as elevated lung cancer risk, sometimes decades later. Living somewhere a long time without obvious illness doesn't mean the exposure hasn't had an effect. And it also doesn't mean continuing is smart - he can stop adding to the cumulative exposure right now by getting it fixed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - Dismissing or Delaying", "question": "My mom is 68 and says her doctor told her not to worry about radon. Should I trust that?", "answer": "Some doctors are well-versed in environmental exposures; others aren't. The scientific consensus from the EPA, WHO, and CDC is clear that radon is a real, serious long-term lung cancer risk. If her doctor told her not to worry, it's worth asking whether that doctor is familiar with her specific radon level. A doctor who says \"radon isn't a concern at any level\" is working from incomplete information.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - Dismissing or Delaying", "question": "My dad says the radon number was 3.8 and \"it's under 4 so we're good.\" Is he technically right?", "answer": "He's technically under the EPA action level, but the EPA also says levels between 2 and 4 are worth considering mitigation - the risk is lower but it's still real. 3.8 isn't a number to lose sleep over, but \"under 4 so we're done thinking about it\" isn't quite right either. It's worth running a longer-term test to confirm the number, and considering a fix if it stays that high.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - Dismissing or Delaying", "question": "My parents' house is for sale and the buyer's radon test came back at 6.2. My dad is furious and thinks it's wrong. Can a test be that far off?", "answer": "Short-term tests can have variability, especially if conditions weren't controlled well - windows open, fans running, etc. A second test under proper closed-home conditions can help settle it. But if the second test also comes back elevated, it's real. A 6.2 result in a real estate context can delay a sale if it's not addressed, and most buyers expect it to be mitigated before closing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mom and Dad - Dismissing or Delaying", "question": "My mom says she read online that radon isn't actually dangerous and it's overblown. Where is she getting that and is it true?", "answer": "There are fringe articles that question radon science, but the evidence is extensive. The data comes from decades of uranium miner studies, residential epidemiological studies across multiple countries, and independent agencies around the world. The scientific and public health consensus is solid. Online skepticism about radon usually comes from sources that misunderstand or misrepresent that research.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Dad and Mom - Practical Fixes and Mitigation Questions", "question": "My mom wants to know how long a radon mitigation system takes to install. She's worried it'll be a big construction project.", "answer": "Usually it's a one-day job - a few hours for a standard installation in a typical house. A pipe goes through the floor into the sub-slab, a small fan pulls radon out, and the pipe vents above the roofline. It's not disruptive. Most people go about their normal day while it's being installed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Dad and Mom - Practical Fixes and Mitigation Questions", "question": "My dad wants to know if a radon mitigation system will raise his electric bill a lot.", "answer": "The fans used in mitigation systems are small - similar to a ceiling fan in terms of power draw. The annual electricity cost is typically modest, not a major budget item. For most homeowners it's negligible compared to other appliances.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Dad and Mom - Practical Fixes and Mitigation Questions", "question": "My mom is asking if the radon fan will be loud. She's sensitive to noise.", "answer": "Most radon fans are quiet - a low, steady hum that's comparable to background HVAC noise. In many cases homeowners can't hear it at all from living areas. The fan location matters too; if it's in an attic or an exterior location, you'll hear even less inside. It's not something that disrupts daily life.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Dad and Mom - Practical Fixes and Mitigation Questions", "question": "My dad is asking how long a mitigation system lasts. He doesn't want to replace it in five years.", "answer": "A properly installed system can last many years - fans typically run for a decade or more before needing replacement, and the piping is permanent. The fan itself is the only mechanical part, and it can be swapped out if it ever fails without redoing the whole system. It's low maintenance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Dad and Mom - Practical Fixes and Mitigation Questions", "question": "My parents want to know if they need to do anything to maintain their radon system once it's installed.", "answer": "Minimal maintenance is required. The manometer (a small gauge on the pipe) shows whether the system is working - you glance at it periodically. Other than that, keeping the space around the fan clear and testing the air every two years or so to confirm levels are still low is the main routine. It's not like a furnace that needs annual servicing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Grandma and Grandpa Scenarios", "question": "My grandma's radon alarm went off. She doesn't know what to do. What does that mean?", "answer": "If it's a radon alarm or monitor showing a red or warning state, it means the radon level has risen into a range the device considers elevated - often above 4 pCi/L, though it depends on the brand. It doesn't mean she needs to leave the house right now - radon isn't an acute emergency like carbon monoxide. But she should make note of the reading and get a professional test to confirm, and if the level is above 4, look into mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Grandma and Grandpa Scenarios", "question": "My grandparents have radon at 5.5 pCi/L and my grandpa keeps saying he's too old to worry about it. He's 80. Is he right?", "answer": "Age doesn't eliminate the risk, but the math does shift. At 80, the question is really about quality of life going forward and protecting anyone else in the home - a spouse, visiting grandchildren, a caregiver who's there regularly. It's also worth noting that mitigation protects the house's future occupants and value. Even if he genuinely isn't concerned about himself, the case for fixing it is still there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Grandma and Grandpa Scenarios", "question": "My grandma lives alone and her radon is 6.8. She doesn't have family nearby. How do I help her from a distance?", "answer": "The most useful thing you can do remotely is find her a state licensed radon mitigation professional in her area and help her schedule the call. Getting one estimate is low-effort and low-commitment. Many mitigation companies will handle the whole process with minimal burden on the homeowner - they come, install, and the job's done. You don't need to be there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Grandma and Grandpa Scenarios", "question": "My grandpa thinks radon is just a government scare tactic to make money for contractors. How do I talk to him without starting a fight?", "answer": "You might not win a head-on argument, so try the practical angle: a test is inexpensive and conclusive. If his house turns out to be at 1.5 pCi/L, he's right and there's nothing to argue. If it comes back at 7, the data does the talking. Leading with \"let's just check the number\" is less confrontational than debating the science.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Grandma and Grandpa Scenarios", "question": "My grandmother's house hasn't been tested for radon in over 20 years. She's in her late 70s and lives in the basement most of the day. Should I be worried?", "answer": "Yes, this is worth flagging. The basement is where radon concentrations are typically highest, and spending most of the day there significantly increases cumulative exposure compared to upper floors. A 20-year-old test result tells you nothing reliable about today. It's worth getting a current test, and if levels are elevated, mitigation is a reasonable step even at her age - especially given how much time she spends in the highest-risk area.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Grandma and Grandpa Scenarios", "question": "My grandma's monitor is showing 3.2 pCi/L. She asked me if that's okay. What do I tell her?", "answer": "3.2 is below the EPA action level of 4.0, so it's not in the \"fix immediately\" range. But the EPA does say levels between 2 and 4 are worth thinking about - the risk is lower, not zero. For someone like your grandma who may spend a lot of time at home, it's a reasonable thing to keep an eye on. A long-term test would help confirm if that number is consistent or if it swings higher seasonally.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Grandma and Grandpa Scenarios", "question": "My grandparents' house tested at 11 pCi/L. Is that dangerous? They've been there 40 years.", "answer": "11 is significantly elevated - well above the EPA action level. Forty years of exposure at that level represents substantial cumulative risk. This doesn't change the past, but it does make fixing it now the clearest possible call. Get a mitigation system in as soon as possible. For concerns about health impact from past exposure, that's a conversation for their doctor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Grandma and Grandpa Scenarios", "question": "My grandma is scared to get a radon test because she's afraid of what she'll find. How do I convince her?", "answer": "That fear is understandable, but knowing is always better than not knowing. If the result is low, she gets peace of mind. If it's high, she can fix it and stop the ongoing exposure - which is the one part of this she actually controls. Not knowing doesn't reduce the risk; it just removes the ability to act.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Brothers and Sisters", "question": "My sister just bought a house and the radon test came back at 5.1. She didn't know anything about radon until now. What should I tell her?", "answer": "Tell her that 5.1 is above the EPA action level, so it warrants attention, but it's also completely fixable. This is a very common situation in home purchases - many buyers discover elevated radon during inspection. In a lot of cases, mitigation is negotiated as part of the deal. If she's already closed, she should get it mitigated - it's a one-time fix and it works.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Brothers and Sisters", "question": "My brother thinks radon is fine as long as you keep the windows open. He's at 6.2. Is that true?", "answer": "Opening windows lowers radon temporarily, but it's not reliable or consistent. Radon levels rise and fall with weather and pressure changes, and you can't keep windows open year-round - especially in a cold climate. A mitigation system creates steady negative pressure under the slab that reliably pulls radon out before it enters the house. Ventilation is not an equivalent substitute.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Brothers and Sisters", "question": "My sister is pregnant and her radon is 4.8. Should she be extra worried?", "answer": "Radon risk is a long-term cumulative concern, not an acute one. There's no evidence that radon causes pregnancy complications. Even so, 4.8 is above the EPA action level, and getting it fixed is reasonable for anyone - pregnant or not. The sooner the system is in, the fewer months of elevated exposure. It's worth moving on it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Brothers and Sisters", "question": "My brother has been in his house for three years with radon at 7.5 and has no idea. He just found out. Is it too late?", "answer": "It's not too late - it's never too late to stop adding to cumulative exposure. The three years of exposure already happened, and that can't be changed. But fixing it now means stopping that accumulation going forward. At 7.5, getting a mitigation system in is the right call, and it's the one concrete action he can take. For any health concerns from past exposure, his doctor is the right resource.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Brothers and Sisters", "question": "My sister's husband says the radon result of 6.4 must be wrong because they never smell anything or feel sick. Is he confusing radon with something else?", "answer": "Yes - radon has no smell, no taste, and doesn't cause any immediate symptoms. You can't detect it by how you feel. Headaches, fatigue, and sore throats are not signs of radon exposure - radon's harm is a long-term increase in lung cancer risk from cumulative radiation, and that doesn't show up until years or decades later. You genuinely cannot tell by feel that radon is elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Brothers and Sisters", "question": "My brother tested his house and got 2.8 pCi/L. He asked if he should fix it. What do I tell him?", "answer": "2.8 is below the EPA action level of 4.0, so the EPA doesn't recommend mandatory action at that level. The EPA does say levels between 2 and 4 are worth considering mitigation - the risk is real, just lower. At 2.8, it's a personal call rather than a clear fix-it situation. If he wants to be proactive and resources allow, mitigation is reasonable. If not, confirming with a longer test and monitoring is also sensible.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Brothers and Sisters", "question": "My sister bought a new construction home and the builder says radon is not an issue in new homes. Is that right?", "answer": "Not necessarily. Radon doesn't care whether a home is new or old - it comes from the soil, and new construction can have elevated levels depending on geology and how the foundation is built. Some builders include radon-resistant construction features, which helps, but even those don't warranty low levels. Testing after move-in is always a good idea, regardless of what the builder says.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Brothers and Sisters", "question": "My brother has a RadonEye and it's showing 4.2 pCi/L. He asked if that's at the limit or above it.", "answer": "The EPA action level is 4.0, so 4.2 is above it - not drastically, but above. The EPA recommendation at that level is to fix. A continuous monitor like the RadonEye is giving him useful real-time data, but for a final decision on mitigation it helps to confirm with a longer test, since levels fluctuate. Still, 4.2 is worth taking seriously and not ignoring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Brothers and Sisters", "question": "My brother lives in a house with a crawl space and his radon is 5.9. Is a crawl space harder to mitigate?", "answer": "Crawl space homes are different from slab homes but still very mitigable. Common approaches include encapsulating the crawl space with a heavy vapor barrier and ventilating or depressurizing beneath it. It can be slightly more involved than a standard sub-slab system, but it's a well-understood problem with reliable solutions. A licensed radon mitigation professional who has experience with crawl spaces can assess the best approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "In-Laws", "question": "My mother-in-law's house tested at 8.3 pCi/L. My wife wants me to say something to her but I don't want to overstep. What's the right play?", "answer": "8.3 is a level where saying something is clearly warranted - it's more than double the EPA action level. You can frame it simply and without alarm: \"I saw your test results and wanted to make sure you knew that's above the EPA level where they recommend fixing it. It's an easy fix - just want you to have that information.\" You don't need to push hard; giving her the information is the right move.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "In-Laws", "question": "My in-laws have a radon level of 4.9 and they're asking us if they should worry. What do I tell them?", "answer": "4.9 is above the EPA action level, so the EPA recommendation is to mitigate. It's not a crisis number, but it's solidly in the \"fix it\" range. The good news is it's a well-defined problem with a reliable solution. Tell them it's worth getting done, that it's usually a one-day job, and that once it's in they won't have to think about it again.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "In-Laws", "question": "My father-in-law says radon isn't a problem in his area. Is that true?", "answer": "No specific area is automatically safe from radon. Radon occurs in all 50 states and can be elevated in any county, even ones not considered high-radon zones. The EPA has radon zone maps, but those are based on regional geology averages - individual houses within any zone can test high or low. The only way to know is to test your specific house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "In-Laws", "question": "My in-laws' house has a radon level of 3.6 and my wife is worried. Should she be?", "answer": "3.6 is below the EPA action level of 4.0, so it's not in the urgent-fix zone. Even so, the EPA does acknowledge that the 2-4 pCi/L range carries real risk, just at a lower level. 3.6 isn't a number that demands immediate action, but it's close enough to 4 that running a long-term test and considering mitigation is reasonable, especially if anyone in the house has other lung cancer risk factors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "In-Laws", "question": "My mother-in-law keeps saying her house has always been fine and she's never gotten sick. How do I explain radon to her gently?", "answer": "The key thing to help her understand is that radon doesn't cause symptoms. There's no way to feel it building up - it silently increases lung cancer risk over time through radiation exposure. \"I've always been fine\" is a natural thing to say, but it's not possible to tell from how you feel whether radon has been a factor. The test is the only way to know, and the test result is what should drive the decision.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Aunts and Uncles", "question": "My aunt just found out her radon is 6 pCi/L. Is that bad?", "answer": "Yes, 6 is meaningfully above the EPA's action level of 4. It's not a panic-inducing number - radon at that level is fixable and people live in 6 pCi/L homes every day without dropping immediately - but it does warrant getting a mitigation system installed. The risk compounds over time with continued exposure, so acting sooner rather than later is the right call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Aunts and Uncles", "question": "My uncle has high radon and doesn't want to fix it. What should I tell him?", "answer": "Ask him what's driving the hesitation - is it cost, skepticism, or just not thinking it's that urgent? For skepticism, the science is solid. For cost, it's a one-time expense that lasts years. For urgency, the risk accumulates every month, so there's no neutral position - waiting is a choice with consequences. Sometimes it helps to just get one quote so he knows what he's actually dealing with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Aunts and Uncles", "question": "My aunt lives in a basement and her radon is 7.8. How worried should I be for her?", "answer": "Basement living with 7.8 pCi/L is a real concern worth acting on. Radon concentrations are typically highest in lower levels, so someone who sleeps and spends their days in a basement gets more exposure than someone who's only down there occasionally. At 7.8, getting mitigation done is a clear call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Aunts and Uncles", "question": "My aunt called me freaking out because her radon test was 4.3. How do I calm her down without dismissing her concern?", "answer": "Validate that she's right to take it seriously - 4.3 is above the EPA action level and worth fixing. But reassure her that this is a solvable problem. Radon mitigation works, it's a mature and reliable process, and getting a system installed means she can stop worrying about it for good. She's in a much better position knowing than not knowing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Aunts and Uncles", "question": "My uncle says he's going to test again next year to see if it goes down. His current level is 6.7. Is that a reasonable plan?", "answer": "Not really. Radon levels don't go down on their own - there's no mechanism by which elevated radon self-corrects without intervention. Waiting a year at 6.7 is just a year of continued elevated exposure without any benefit. Retesting has a role in confirming a result, but retesting without taking any action when you already have a clear elevated reading doesn't make sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Aunts and Uncles", "question": "My aunt got a short-term radon test that said 5.2. She's asking if she should do a long-term test to be sure before spending money on mitigation.", "answer": "Short-term tests can vary due to weather and conditions during the test. If she wants to confirm before committing to mitigation, a 90-day long-term test will give a more reliable annual average. At 5.2 on a short-term test, it would be unusual for a long-term test to show the house is actually well under 4. It's a reasonable step if she wants certainty, but the short-term result is already a meaningful data point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Aunts and Uncles", "question": "My uncle is asking if radon is a problem in the summer or just in winter. His house has been sitting open all summer and now he wants to test.", "answer": "Radon levels tend to be lower in summer when windows are open and ventilation is high, and higher in winter when houses are closed up. Testing in summer often underestimates annual average radon levels. If he wants a realistic baseline, testing in cooler months with the house closed is more representative. A long-term test running through multiple seasons gives the most reliable picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbors", "question": "My neighbor's radon was 8 and he says he's going to just open windows. Is that smart?", "answer": "Honestly, no. Opening windows is an unreliable, inconsistent approach - levels fluctuate with temperature, wind, and pressure, and you can't keep windows open all winter. At 8 pCi/L, that's well above the EPA action level and a level where a proper mitigation system is the right call. Ventilation might reduce levels on a good day, but it won't keep them consistently low.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbors", "question": "My neighbor found out she has radon at 4.2 and she's asking me what to do. I don't know much about radon. What should I tell her?", "answer": "Tell her that 4.2 is above the EPA action level of 4.0, so the EPA recommendation is to fix it. The standard fix is a sub-slab depressurization system - a pipe and a small fan that pulls radon from under the foundation before it gets into the house. It's a one-day installation and it works reliably. She should look for a state licensed radon mitigation professional in your state, or call one for a quote to see what she's working with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbors", "question": "My neighbor said his house tested low for radon, so he assumed mine would too. Should I bother testing?", "answer": "Absolutely test. Radon can vary dramatically between adjacent houses because the soil underneath can be geologically different even just feet apart. Your neighbor's low result tells you nothing about what's under your foundation. The only way to know is to test your house specifically.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbors", "question": "My neighbor told me she had radon mitigation done and her numbers went from 7 down to 0.6. Is that a realistic result?", "answer": "Yes, that's realistic. A properly installed sub-slab depressurization system routinely drops radon levels dramatically - getting levels below 2 pCi/L from a high starting point is common, and 0.6 is a great result. When the system is working well and the installation is done correctly, reductions of 80-90%+ are typical.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbors", "question": "I told my neighbor her radon is a problem and she got defensive and said I was trying to scare her. How do I handle that?", "answer": "At that point, just leave the door open without pushing. You've done the neighborly thing by sharing the information. You could offer to send her a link to the EPA's radon overview or let her know where she can get a test kit. After that, it's her call. People often come around when they're ready to engage with it on their own terms.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbors", "question": "My neighbor tested at 9.4 pCi/L and is acting like it's fine. How high does it have to get before it's serious?", "answer": "The EPA action level is 4.0, so at 9.4 he's more than twice that. There's no official \"too high to ignore\" threshold because the action level is 4.0 - any level above that warrants fixing. At 9.4 the risk is meaningfully elevated and the case for mitigation is clear. Whether to act on that is his decision, but from a risk standpoint, 9.4 is not fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbors", "question": "My neighbor said radon is only a problem for smokers. Is there any truth to that?", "answer": "There's a kernel of science being misapplied. Radon significantly multiplies lung cancer risk for smokers - the combination of smoking and radon is dramatically worse than either alone. But non-smokers who are exposed to elevated radon also have increased lung cancer risk from radon alone. The EPA's guidance and action levels apply to everyone, regardless of smoking history.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Friends", "question": "My friend says their RadonEye is at 4.2. Should they be concerned?", "answer": "4.2 is above the EPA action level of 4.0, so yes, it's worth taking seriously. A RadonEye is a good continuous monitor and 4.2 is a real reading. The next step is either confirming with a lab-certified test or reaching out to a licensed radon mitigation professional to assess the home. At that level the recommendation is to fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Friends", "question": "My coworker found out they have radon and they're panicking. What's the realistic risk?", "answer": "The realistic risk is this: radon is a long-term lung cancer hazard from cumulative radiation exposure. It doesn't cause immediate symptoms or an acute health crisis. The level matters, and the solution - mitigation - is reliable and effective. If their level is above 4 pCi/L, they should get it fixed, and then they can stop worrying about it. The situation is serious enough to act on but not to spiral about.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Friends", "question": "My friend has radon at 3.5 and she's asking if she should spend money to fix it. What would you say?", "answer": "At 3.5, she's below the EPA action level but in a range the EPA says is worth considering. It's a personal decision based on her risk tolerance, how long she plans to stay in the house, and what mitigation would cost in her area. If she's planning to be there for many more years, it's a reasonable investment. If she's moving in a year or two, she might wait and see. But the risk at 3.5 isn't zero.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Friends", "question": "My friend's house tested at 12 pCi/L. That seems really high. Is that on the extreme end?", "answer": "12 is on the high end of what you commonly see in residential testing, yes. It's well above the EPA action level and represents meaningfully elevated cumulative lung cancer risk. The good news is that even at 12, mitigation works - levels that high often drop dramatically with a properly installed system. This is a situation where moving quickly rather than waiting makes sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Friends", "question": "My friend told me her radon test was 1.8 pCi/L. She asked if that's something to worry about.", "answer": "1.8 is below both the EPA action level of 4.0 and the range (2-4) where the EPA says to consider fixing. It's relatively low. The EPA's guidance doesn't suggest action at that level. She can note it, run a long-term test to confirm, and feel reasonably at ease. No level is zero-risk, but 1.8 is in the low end of what most homes show.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Friends", "question": "My friend moved into a house six months ago and just tested for the first time. Radon is at 5.8. She's worried she's already been harmed. What do I tell her?", "answer": "Six months of exposure at 5.8 pCi/L is real exposure, but radon harm is cumulative over many years. It's not a situation where she can measure the damage from a six-month window. The right response is to get it fixed now, stop the ongoing exposure, and not carry guilt about time already spent in the house. If she has health concerns, those are for her doctor - but radon doesn't cause symptoms you'd have noticed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Friends", "question": "My friend keeps saying she'll get a radon test but hasn't done it in the two years she's been in her house. How do I convince her?", "answer": "Testing is inexpensive and not burdensome - you put a test kit in the lowest livable area of the house and leave it there. There's very little activation energy required. The value of knowing whether the house is fine or needs attention is genuinely worth the minimal effort. If she keeps putting it off, offer to get her a test kit or look one up for her. Sometimes the only barrier is inertia.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Friends", "question": "My friend says she has a radon mitigation system from when she bought the house, so she doesn't need to test. Is that right?", "answer": "Not quite. A mitigation system is a great sign, but it should be confirmed to be working. Fans can slow or fail over time, piping can develop issues, and it's worth verifying the levels are actually low after installation - the previous owner's post-mitigation test may be outdated. A simple radon test every couple of years confirms the system is still doing its job.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Coworkers and Bosses", "question": "My coworker found out their house has radon at 6.1. They asked me if they should get the mitigation done now or wait until after their renovation. What do I say?", "answer": "Do it now. Living with 6.1 during a renovation could take months, and the construction process can actually disturb the sub-slab and temporarily make things worse. More practically, mitigation is easier to do before walls are opened up or work complicates access. There's no good reason to wait.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Coworkers and Bosses", "question": "My boss just mentioned her house has radon and she doesn't know if 4.8 is bad. I want to give her good information. What's accurate?", "answer": "4.8 is above the EPA action level of 4.0, so the EPA recommends fixing it. It's not a dramatically dangerous level, but it's clearly in the range where action is warranted. The fix is a sub-slab depressurization system - typically a one-day installation that brings levels down substantially and stays effective for years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Coworkers and Bosses", "question": "My coworker is freaking out because their radon came back at 5.2 on a test and now they can't sleep. Is that reaction warranted?", "answer": "The concern is warranted enough to act on, but the panic isn't warranted. Radon at 5.2 over a period of years increases lung cancer risk - it doesn't cause anything overnight or even over weeks. Getting the system installed resolves the ongoing risk. The right response is action, not anxiety. Once the mitigation is in and confirmed working, there's very little left to worry about.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Coworkers and Bosses", "question": "My coworker said their landlord won't test for radon because \"the building is compliant.\" What does that even mean?", "answer": "Radon-related building compliance language is tricky - it often refers to construction standards (like radon-resistant new construction), not actual tested levels. A building being constructed per code doesn't warranty low radon. If your coworker is concerned about their unit, they can test it independently with a kit from a hardware store. Having real data is more useful than taking the landlord's \"compliant\" claim at face value.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Landlords and Renters", "question": "My sister-in-law lives in a basement apartment. Should she be worried about radon?", "answer": "Basement apartments are worth testing. Radon concentrations are highest at lower levels - that's where it enters from the soil - and someone living in a basement full-time gets more cumulative exposure than someone on an upper floor. She should get the unit tested if it hasn't been recently, and if levels are above 4 pCi/L, she should raise it with the landlord. It's worth knowing what she's working with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Landlords and Renters", "question": "My friend rents a basement apartment and her radon test came back at 7.3. What are her options?", "answer": "She should start by notifying the landlord in writing with the test result and documenting that notification. Her next step depends on her state's laws - some require landlords to mitigate above the action level, others don't. If the landlord won't act, she can contact her state's radon program or health department to understand her rights. If she can't get the landlord to fix it, she may need to weigh the risk against her lease situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Landlords and Renters", "question": "My tenant told me their radon test was 5.0. What am I obligated to do as a landlord?", "answer": "That depends on your state - radon obligations for landlords vary. Regardless of legal minimums, a 5.0 reading is above the EPA action level and the straightforward call is to get it mitigated. Mitigation in a rental property is a one-time cost that protects your tenants, eliminates future liability, and preserves the property's value. Most landlords who understand radon choose to fix it even when not explicitly required.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Landlords and Renters", "question": "My friend lives in a rental with radon at 6.2 and the landlord said he'll put air fresheners in. Is he serious?", "answer": "Air fresheners have no effect on radon whatsoever. Radon is a radioactive gas - no consumer product deodorizes, absorbs, or mitigates it. That response suggests the landlord either doesn't understand the problem or is not engaging in good faith. Your friend should put the notification in writing and look up her state's radon tenant laws to understand what recourse she has.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Landlords and Renters", "question": "My friend just moved into a new apartment and she's worried about radon. Should she test?", "answer": "Testing is always worthwhile, especially if she's in a lower-level unit. Many newer buildings include radon-resistant features, but those don't warranty low levels. A simple test kit can give her a clear picture. If levels are elevated, she can raise it with her landlord from the start rather than after living with it for years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Landlords and Renters", "question": "My brother just bought a house that was listed as having a radon mitigation system. Do they still need to test?", "answer": "Yes, a post-move test is smart even with an existing system. The system may have been installed years ago, fans don't last forever, and you want to confirm it's actually working under current conditions. Running a test after move-in is good practice - it takes a short-term test or a few months of a continuous monitor and gives peace of mind that the system is doing its job.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Landlords and Renters", "question": "My sister moved into a house two months ago and hasn't tested yet. Her neighbor says the whole neighborhood has radon issues. Should she test?", "answer": "Neighborhood reputation for radon is a signal worth taking seriously. And two months in is a good time to get a baseline test - she now has a sense of how the house is used (windows, HVAC habits) and can test under typical conditions. If the region is known for elevated radon, the probability that her house will show elevated levels is higher. Get the test done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Scenarios with Monitors and Devices", "question": "My mom's Airthings is showing red. She doesn't know what to do.", "answer": "A red reading on an Airthings means radon has reached a level the device considers elevated - typically above 4 pCi/L, depending on the model. It doesn't mean she needs to evacuate; radon isn't an acute emergency. It means she should note the reading, see if it persists over a few days of averaging, and if it stays red, have a mitigation professional assess the home. One high reading can be an anomaly, but sustained red readings need to be taken seriously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Scenarios with Monitors and Devices", "question": "My dad bought a cheap radon monitor off Amazon and it's showing 5.0. Should he trust that?", "answer": "Inexpensive radon monitors from less-established brands can have accuracy issues, so it's worth treating the reading as a data point rather than gospel. The right move is to run a lab-certified charcoal canister test alongside the monitor to see if results are consistent. If a lab test also comes back around 5, that's real. If the lab test is much lower, the monitor may need calibration or replacement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Scenarios with Monitors and Devices", "question": "My aunt's RadonEye app is showing 4.6 as a long-term average. Is that the number she should act on?", "answer": "A long-term average on a quality continuous monitor like the RadonEye is meaningful data. 4.6 as a sustained average is above the EPA action level and is a solid basis for deciding to mitigate. For a definitive result, a lab-certified test running alongside it would be ideal, but a long-term average from a reputable monitor at 4.6 is not something to dismiss.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Scenarios with Monitors and Devices", "question": "My friend's Airthings app shows her radon fluctuating between 2 and 7 pCi/L at different times of day. Which number should she worry about?", "answer": "Radon levels naturally fluctuate - they're often higher at night and in early morning, and lower mid-day with more ventilation and activity. What matters is the average over time, not the peak or the low. Most monitor apps show a running average over days or weeks - that's the number to focus on for making decisions. If her long-term average is consistently above 4, she should act.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Scenarios with Monitors and Devices", "question": "My neighbor has a radon monitor showing 3.8. He asked me if he should just raise the basement windows. Will that help?", "answer": "Opening windows in the basement will likely bring his level down while the windows are open. But 3.8 is close enough to 4 that if he closes the house for winter, the level could easily push above the action level. And relying on open windows isn't a consistent strategy. If he wants peace of mind year-round, mitigation keeps levels low regardless of season or weather.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Scenarios with Monitors and Devices", "question": "My mom has had a radon monitor for a month and the average is 5.4. Should she get an official test too?", "answer": "A month of data from a quality continuous monitor is a useful baseline. If she wants to confirm before spending money on mitigation, a lab-certified long-term test running simultaneously for another 90 days would give her a certified number. But if the monitor is a reputable brand and she's had it in the right location for a month, a 5.4 average is meaningful. Either way, 5.4 is above the EPA action level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "People Who Are Panicking", "question": "My sister is completely panicking about her radon result of 7.2. She's convinced she already has lung cancer. What do I tell her?", "answer": "Tell her that radon risk is cumulative - it's not a result you see from any single test result, and her having elevated radon doesn't mean she has or will get lung cancer. The risk goes up with cumulative long-term exposure, not from a number on a paper. The thing to do is get the mitigation done, reduce the ongoing exposure, and if she has genuine health concerns, her doctor is the right conversation partner. But radon doesn't cause a diagnosis in the time it takes to run a test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "People Who Are Panicking", "question": "My coworker found out they've had radon at 8 pCi/L for five years and now they're spiraling. Is their fear rational?", "answer": "The concern is understandable. Five years at 8 pCi/L is real cumulative exposure, and it does represent elevated lung cancer risk compared to people in lower-radon homes. That's worth acknowledging honestly. At the same time, elevated risk doesn't mean a certain outcome - risk means probability, not destiny. The most useful things they can do: fix the radon now, not smoke, and bring up their exposure history with their doctor. The spiral won't change the past; action going forward is the only lever.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "People Who Are Panicking", "question": "My neighbor called me scared about her radon test showing 5.5. She asked if she should move out. Does she need to leave her house?", "answer": "No. Radon at 5.5 is not an emergency requiring evacuation. Radon is a long-term lung cancer risk from cumulative radiation - it's not like carbon monoxide where you need to get out immediately. She can stay in her home, get a mitigation system scheduled, and continue normal life. Once the system is in and confirmed working, she's back to low levels. Moving out is not warranted.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "People Who Are Panicking", "question": "My mom found out her radon is 5.1 and she's been googling lung cancer statistics and is terrified. How do I help her?", "answer": "The most helpful thing is to redirect her from statistics to action. The googling feeds anxiety but doesn't change anything. Getting the mitigation done is the one concrete action that actually reduces her ongoing risk - and once the system is in and the post-mitigation test shows low levels, she can close that loop. For any health concerns about past exposure, encourage her to talk to her doctor, who can put it in proper clinical context.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "People Who Are Panicking", "question": "My grandma is 79 and just found out she has radon at 9.3. She's scared she's going to die. What do I tell her?", "answer": "Be honest that 9.3 is high and worth fixing, but reassure her that radon causes elevated long-term risk - it's not an immediate health event. At 79, the calculus is different than for a 40-year-old, but the mitigation still makes sense - especially if a spouse, caregivers, or grandchildren spend time in the home. And fixing it gives her peace of mind, which is worth something on its own. Help her get a mitigator scheduled; the job itself is simple.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Can't Afford Mitigation", "question": "My mom has radon at 7.1 but she says she can't afford mitigation. What are her options?", "answer": "It's worth getting a quote first - the cost is often lower than people expect, especially for a standard single-story house with a basement or slab. Some states have radon assistance programs or weatherization programs that incorporate radon mitigation for lower-income homeowners. She could also check with local health departments about any available resources. The cost of not fixing it over years of continued high exposure is worth weighing too.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Can't Afford Mitigation", "question": "My dad says he doesn't have money for radon mitigation and his level is 5.8. Is there a cheaper DIY option?", "answer": "There are DIY radon mitigation kits on the market, and some homeowners do attempt DIY installation. The results are variable - if the system isn't designed or installed correctly, it may not work or may even make things worse. The professional installation ensures the system is designed for the specific home's sub-slab conditions, properly placed, and actually gets levels down. If cost is the issue, getting a few quotes and asking about payment options is worth the call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Can't Afford Mitigation", "question": "My neighbor is a single mom and can't afford radon mitigation. Her radon is 5.2. Any advice?", "answer": "Some states offer assistance programs specifically for radon mitigation, often tied to existing weatherization or home energy programs. The EPA website has a list of state radon contacts, and state health departments sometimes know of local resources. It's worth a few calls to find out what's available in her state. The cost varies by home and location, and getting quotes from multiple mitigators can sometimes reveal a more affordable option.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Can't Afford Mitigation", "question": "My uncle says he'll get his radon fixed when he has more money. It's at 6.3. When is it actually urgent?", "answer": "The EPA's recommendation is to fix at or above 4.0, and 6.3 is well above that. Radon risk compounds with time - every month of elevated exposure adds to the cumulative total. There's no specific date after which it becomes critical, but there's also no benefit to waiting. If cost is the driver, it's worth getting a quote, because the actual cost may be less than he's imagining. Taking action sooner reduces risk more than taking action later.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Elderly Homeowners", "question": "My 82-year-old grandmother has radon at 6.4. Her kids are debating whether to bother fixing it at her age. What's the right call?", "answer": "The arguments for fixing still outweigh the arguments against, even at 82. Anyone else who spends significant time in that home - other family members, a caregiver, visiting grandchildren - is also being protected by a mitigation system. And your grandmother herself has an unknown number of years ahead; the risk doesn't switch off on a birthday. It's a relatively modest intervention with lasting benefit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Elderly Homeowners", "question": "My dad is 77 and has radon at 5.0. He says the risk over the next few years doesn't matter much. Is that logic right?", "answer": "The logic has some basis - radon-related lung cancer typically develops over decades of cumulative exposure, and at 77 the equation is different than at 47. But it's not zero, and the question is also about who else uses the home. A spouse, a regular caregiver, visiting family - all of them are protected if the level is brought down. And mitigation is a modest, non-disruptive fix. The argument for it still holds even if the calculation is different than it would be for a younger person.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Elderly Homeowners", "question": "My elderly mother has been told her house has radon at 4.5. She's in poor health and I'm worried about adding stress. How do I bring this up?", "answer": "Frame it around fixing the problem rather than the risk - \"Mom, we found out there's elevated radon in the house and there's a simple fix, like an HVAC repair - a guy comes out and installs a small system and it's done.\" You don't need to get deep into cancer risk statistics with her. The emotional burden of doing something is lighter than the emotional burden of knowing there's a problem and doing nothing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Elderly Homeowners", "question": "My 84-year-old grandfather lives alone and his radon is 7.8. He doesn't have family nearby to help manage this. What do I do from a distance?", "answer": "Find him a licensed radon mitigation professional remotely - look up your state's or his state's licensed radon professional list, call for a quote on his behalf, and help schedule the appointment. Many mitigators will handle the whole interaction with the homeowner directly once someone makes the initial contact and sets it in motion. You don't need to be there in person.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Elderly Homeowners", "question": "My grandpa has a radon level of 8.1. He says he'd rather spend his money on his grandkids. How do I convince him the mitigation is worth it?", "answer": "Point out that protecting his grandkids might include keeping himself healthier for longer, and that if grandchildren visit often, they're also spending time in an elevated-radon house. Beyond that, a mitigation system adds resale value and will save whoever inherits the house from having to deal with it. It's a one-time cost with lasting benefit, not an ongoing expense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Borderline Levels", "question": "My mom's radon came back at 2.4 pCi/L. Is that worth worrying about?", "answer": "2.4 is below the EPA action level of 4.0. The EPA does say the 2-4 pCi/L range carries real risk - lower than above 4, but not zero - and that mitigation in that range is worth considering. At 2.4, it's not a fix-it-now situation, but confirming with a longer test to make sure it's stable and not seasonally higher is reasonable. Most people at 2.4 choose to monitor rather than immediately mitigate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Borderline Levels", "question": "My neighbor is at 3.9 pCi/L and says that's \"under the limit so he's fine.\" Is he right?", "answer": "He's technically under the EPA action level by 0.1, yes. The action level isn't a cliff where 3.9 is safe and 4.0 is dangerous - it's a policy line based on where the risk-benefit of acting becomes clearly favorable. At 3.9, the EPA does recommend considering mitigation because the risk is still real. It's worth noting that seasonal variation means his level could easily push above 4 in winter.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Borderline Levels", "question": "My brother tested at 3.6 pCi/L. His wife wants to mitigate; he says it's overkill. Who's right?", "answer": "The wife has a reasonable position. The EPA acknowledges risk in the 2-4 pCi/L range and says mitigation in that range is worth considering. 3.6 isn't alarmingly high, but it's not a clean all-clear either. If they plan to stay in the house for many years, addressing it while the level is still on the lower end makes sense. It's not overkill - it's a reasonable risk-management decision.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Borderline Levels", "question": "My aunt's house came back at 2.1 pCi/L. Should she get mitigation?", "answer": "At 2.1, the EPA doesn't recommend mandatory action. The risk at that level is real but low compared to higher levels. Most licensed radon mitigation professionals would likely tell her that 2.1 is in a range where mitigation is optional rather than essential. If she wants the absolute lowest possible level for peace of mind, mitigation could bring it below 1. But it's genuinely a personal call at 2.1.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Borderline Levels", "question": "My uncle tested his house in summer and got 2.8 pCi/L. He thinks that's good enough. Should he retest?", "answer": "A summer test often underestimates annual radon levels because houses are more ventilated in warm months. If he wants an accurate picture of what he's actually exposed to on average, a long-term test running through fall and winter would be more representative. A 2.8 in summer could be 3.5 or higher in winter with closed windows. Worth confirming.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Borderline Levels", "question": "My neighbor's radon is 3.1 pCi/L. She's pregnant and asked if she should be concerned.", "answer": "3.1 is below the EPA action level, so it's not in the urgent-fix zone. Radon hasn't been shown to cause pregnancy complications - it's a long-term lung cancer risk from cumulative exposure. For a pregnant woman who plans to stay in the home long-term, it's reasonable to consider mitigation given the 2-4 pCi/L range carries real risk. But she shouldn't be alarmed - this is worth monitoring and considering, not panicking about.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Borderline Levels", "question": "My coworker tested at 2.9 pCi/L and asked if that's basically fine. What's the honest answer?", "answer": "The honest answer is: it's below the EPA action level, so the EPA doesn't say you must act, but the EPA also doesn't say 2.9 is without risk. The average indoor radon level in the U.S. is about 1.3 pCi/L, so 2.9 is notably above average. Whether to mitigate at that level is a personal call. It's not a crisis, but it's also not the same as 1.0.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Very High Levels", "question": "My aunt just got a test back showing 14 pCi/L. That seems insanely high. Is that even possible?", "answer": "14 is high but not unheard of - residential radon testing regularly turns up results in the 10-20 range in certain geological areas. It's above the EPA action level by a wide margin, and it warrants getting a mitigation system in as soon as possible. The good news is that even very high starting levels like 14 respond well to mitigation - post-mitigation results in the 1-2 range are realistic even from that starting point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Very High Levels", "question": "My dad's house is showing 18 pCi/L on a long-term test. Should he be panicking?", "answer": "He should be acting, not panicking. 18 is very high and absolutely warrants immediate attention, but the solution is clear: get a mitigation system installed. Radon at any level is fixable. At 18, the system is especially important, and in some cases additional mitigation steps (a second suction point, a more powerful fan) may be needed. But this is a solvable problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Very High Levels", "question": "My neighbor's house tested at 22 pCi/L. Is that the highest radon can get in a house?", "answer": "Residential tests can occasionally go higher - 20-30 pCi/L and above is rare but documented in areas with specific geological conditions. 22 is very high and clearly requires immediate mitigation. It's not cause for leaving the house today, but it is cause for getting a mitigator scheduled this week. At levels like that, the annual exposure accumulates quickly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Very High Levels", "question": "My grandma's house came back at 9.6 pCi/L. The contractor says that's not that high. Is that right?", "answer": "9.6 is more than double the EPA action level. Any contractor saying 9.6 is \"not that high\" is either misframing it or poorly informed. 9.6 is firmly in the fix-it-now range. The fact that some houses test even higher doesn't make 9.6 unremarkable - it's well above the threshold where the EPA recommends action.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Very High Levels", "question": "My uncle's house is at 11 pCi/L and he's been there for 25 years. He found out yesterday. What should he do today?", "answer": "Today: don't panic. 25 years of exposure at that level has already happened, and that can't be changed. What he can control is what happens from here. He should call a state licensed radon mitigation professional and get the process started. For any health concerns related to past exposure, his doctor is the right resource - radon exposure history is worth documenting in his medical record. Beyond that, getting the level fixed is the single most useful action.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Very High Levels", "question": "My neighbor has radon at 10.4 and he's been letting his grandkids play in the basement all summer. Should I say something?", "answer": "Yes, gently and factually. Kids playing in a basement with 10.4 pCi/L radon are getting significant cumulative exposure. You don't have to be alarmist about it, but the information is worth sharing: \"I heard you tested high for radon in the basement - that's well above the level where they recommend fixing it, and kids in the basement are worth thinking about.\" Whether he acts on it is his call, but telling him is the right thing to do.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Very High Levels", "question": "My friend's basement office has radon at 8.2. She works from home full time. How serious is that situation?", "answer": "That's a serious situation worth addressing quickly. Someone working eight hours a day in a basement with 8.2 pCi/L radon is accumulating exposure at a rate far higher than someone who just passes through occasionally. The daily hours in the high-radon space dramatically increase the real-world dose compared to a typical homeowner who spends a couple of hours in a basement. Getting a mitigation system in should be a priority, not a someday item.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Very High Levels", "question": "My dad tested at 13 pCi/L and a contractor told him the fan won't fix a level that high. Is that true?", "answer": "That's not accurate. Sub-slab depressurization works across the full range of indoor radon levels. A level of 13 might require more careful system design - proper suction point placement, potentially a higher-capacity fan, and sometimes more than one suction point for larger slabs - but it absolutely can be brought down to low levels. A 13 pCi/L result is high, but mitigable. If a contractor says otherwise, get a second opinion from a different licensed radon mitigation professional.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Low Levels", "question": "My friend's house tested at 1.3 pCi/L. She asked if she needs to do anything.", "answer": "1.3 is at roughly the U.S. average indoor level. The EPA doesn't recommend action below 4.0, and 1.3 is well below that. There's nothing she needs to do. She can note it for future reference and retest in a few years, but 1.3 is a genuinely reassuring result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Low Levels", "question": "My neighbor told me their house is at 1.8 pCi/L. They want to know if that's \"good.\"", "answer": "1.8 is below the EPA action level and on the lower end of typical indoor levels. It's a good result. The EPA doesn't recommend action at that level. She can rest easy about the radon situation in that house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Low Levels", "question": "My sister's house tested at 0.8 pCi/L. She asked if there's any such thing as too low for radon.", "answer": "0.8 is very low - outdoor air is typically around 0.4 pCi/L, so 0.8 indoors is excellent. No, there's no concern about radon being too low. That's a great result and nothing to think about further.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Low Levels", "question": "My mom tested at 2.0 pCi/L. She's heard you can never be fully rid of radon. Is she right that there's no point mitigating at 2?", "answer": "She's right that some level of radon is always present everywhere - even outdoors - and a mitigation system won't bring a house to exactly zero. But at 2.0, the EPA doesn't recommend action anyway. If she wanted to go further, mitigation could potentially bring it closer to 1, but the benefit-cost argument at 2.0 is much weaker than at higher levels. 2.0 is a reasonable result where watchful monitoring is appropriate, not urgency.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Low Levels", "question": "My neighbor tested at 1.5 and my house tested at 4.2. We're right next to each other. He thinks my test must be wrong. Is he right?", "answer": "He's not right. Radon varies significantly between adjacent properties - the soil geology under each foundation is independent of the other. Two houses side by side can have very different radon levels. His 1.5 doesn't say anything about your 4.2. Your result is real.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Homeowners", "question": "My friend just closed on a house and found out the radon wasn't tested before purchase. What should she do now?", "answer": "Test immediately. She can use a short-term test from a hardware store or order a lab kit online. Put it in the lowest livable area of the house, follow the instructions, and send it in. She'll have results in a week or two. If the level is above 4, she knows what she's dealing with early and can get it addressed quickly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Homeowners", "question": "My brother just bought a house and his home inspector said the radon was 3.7. The seller said that's fine because it's under 4. My brother's not sure what to believe.", "answer": "3.7 is below the EPA action level of 4.0, so the seller's statement isn't wrong on its face. However, 3.7 is close to 4, and short-term tests have variability - the actual average could be slightly higher or lower. The EPA does acknowledge that the 2-4 pCi/L range carries real risk worth considering. Your brother could ask for a longer-term test before closing, or plan to retest in the first year with windows and doors in their normal position.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Homeowners", "question": "My coworker just moved into a new construction home. The builder says it was built \"radon resistant.\" Does she still need to test?", "answer": "Yes. Radon-resistant new construction (RRNC) is a set of construction features that reduce radon entry - it's not a warranty of any particular level. RRNC homes generally test lower than comparable non-RRNC homes, but they can still have elevated levels. Testing after move-in is the only way to know what the actual level is in her specific home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Homeowners", "question": "My friend's real estate agent told her radon is only a problem in older homes. Is that true?", "answer": "No. Radon comes from the soil, not from the age of the house. New homes can have elevated radon - in some cases more so than older homes, because newer construction is tighter and allows less natural air exchange. Age of home is not a reliable predictor of radon level. Every home should be tested.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Homeowners", "question": "My neighbor just bought a house and the inspection report mentioned elevated radon but the seller agreed to put in a mitigation system before closing. It's been installed. Does my neighbor still need to test?", "answer": "Yes, she should do a post-mitigation test. The system may have been installed correctly and working well, but confirming with an actual test is the responsible step. A system that was rushed to closing or installed by a less careful contractor might not have brought levels down as much as expected. Post-mitigation testing is standard practice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Homeowners", "question": "My sister bought a house and it came with a radon mitigation system already installed. She asked if that means the house definitely has low radon now.", "answer": "A pre-existing mitigation system is a good sign, but she should still verify it's actually working. Fan motors can slow or fail, piping can develop leaks, and there's no way to know how old the system is or when it was last confirmed to be functioning. A simple test in the lowest livable area will tell her whether levels are actually low. Takes a week and very little effort.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Seasonal and Situational Variability", "question": "My aunt's radon was 2.9 in summer and now it's showing 5.1 in December. Why did it go up so much?", "answer": "Radon levels are higher in winter in most homes. The house is closed up, there's less ventilation, and the temperature differential between inside and outside increases the stack effect that draws radon up from the soil. A 2.9 summer reading rising to 5.1 in winter is a meaningful difference - the annual average is what the EPA uses for risk assessment, and the winter reading is likely more representative than the summer one. 5.1 is above the action level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Seasonal and Situational Variability", "question": "My neighbor asked me why his Airthings shows higher radon at night than during the day. Is something wrong with the monitor?", "answer": "Nothing is wrong - that's normal radon behavior. Radon levels typically peak in early morning and drop during the day when windows open, people move around, and ventilation increases. The pattern he's seeing reflects actual fluctuation, not a device malfunction. The important number is the long-term average, which smooths out those daily swings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Seasonal and Situational Variability", "question": "My sister is worried because her radon went from 3.4 to 5.2 after she finished her basement. Why did it go up?", "answer": "Finishing a basement can change air dynamics in ways that affect radon levels - tighter walls, different pressure relationships, changes to how air moves through the space. Disturbing the sub-slab during construction can also temporarily increase levels. This is exactly why re-testing after any major basement renovation is important. At 5.2, the current level is above the EPA action level and worth addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Seasonal and Situational Variability", "question": "My uncle has radon that fluctuates a lot on his monitor - sometimes 1.5, sometimes 8.2. He doesn't know which reading to go by.", "answer": "He should go by the long-term average shown in his monitor app, not the peaks or troughs. Radon fluctuates with barometric pressure, temperature, wind, HVAC operation, and daily activity. A single reading of 1.5 or 8.2 doesn't tell the whole story. If the long-term average is consistently above 4, that's the actionable number. If the monitor doesn't show a long-term average, three to six months of data gives a meaningful picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mixed Households and Multi-Story Homes", "question": "My parents live in a two-story house and the radon test in the basement was 6.2 but the first floor was 2.4. Which level matters?", "answer": "The basement reading is the primary concern because that's where radon enters and is most concentrated - and it's the level on which EPA recommendations are based. The lower levels throughout the house will tend to be lower. If anyone spends meaningful time in the basement (sleeping, working, recreating), the 6.2 is the relevant number. Mitigation is typically designed to address the basement level, which then also keeps upper floors low.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mixed Households and Multi-Story Homes", "question": "My friend has a finished basement where her kids play every day. Radon is 5.4. Is that worse than if the basement weren't used?", "answer": "Yes, meaningfully so. Radon exposure is about time spent in the space. A basement that's only used for storage versus one where kids spend several hours a day represent very different total exposure amounts. Kids playing in a 5.4 pCi/L basement daily is a strong argument for prioritizing mitigation - not because it's an emergency, but because the cumulative hours add up quickly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mixed Households and Multi-Story Homes", "question": "My sister's in-law suite is in the basement and her mother-in-law lives there full time. Radon tested at 7.1 in the suite. How serious is this?", "answer": "Living full-time in a basement with 7.1 pCi/L is a meaningful concern. The combination of a high level and full-time occupancy means the cumulative exposure is substantial. This one is worth acting on quickly - get a licensed radon mitigation professional to assess the home and install a system. The in-law suite is exactly the kind of space where elevated radon has the most impact.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Mixed Households and Multi-Story Homes", "question": "My parents tested their upstairs bedroom and it came back at 1.4 pCi/L. Do they need to test the basement too?", "answer": "Yes. The upstairs level gives them a sense of exposure in that part of the house, but the basement is where radon enters and concentrates - it's almost always higher than upper levels. For a complete picture, testing the lowest livable level of the home is standard practice. The EPA recommends testing the lowest occupied area.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Monitor Brands and Devices", "question": "My mom has a Safety Siren Pro radon detector and it's beeping at 5.3 pCi/L. What does she do?", "answer": "A sustained reading above 4.0 on a continuous monitor is worth taking seriously. At 5.3, the reading is above the EPA action level. She should note how long it's been averaging at that level, and if it's been there for more than a few days, it's a meaningful data point. The next step is to have a professional assess the home and get a mitigation system installed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Monitor Brands and Devices", "question": "My neighbor has an Airthings Wave Plus and it's been in the green zone for six months, then suddenly went yellow. Should he worry?", "answer": "A shift from green to yellow on Airthings (usually around 2.7 pCi/L) isn't cause for alarm, but it's worth monitoring over the next few weeks to see if it stabilizes or continues rising. Seasonal shifts in winter can push levels up. If it climbs into the red zone (above 4 pCi/L) and stays there, that's when to act.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Monitor Brands and Devices", "question": "My dad bought a Corentium Home monitor and it showed 6.8 pCi/L after 30 days. Is that reliable?", "answer": "The Corentium (also sold as Airthings Corentium) is a reputable monitor. A 30-day average at 6.8 is meaningful - it's above the EPA action level and worth taking seriously. For the most definitive result before major decisions, a lab-certified long-term test is the gold standard, but a 30-day Corentium reading at 6.8 is not a number to dismiss.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Monitor Brands and Devices", "question": "My friend is asking if she can trust the radon reading from the free app she downloaded for her phone. Her phone is showing 3.9 pCi/L.", "answer": "There are no legitimate radon-measuring apps for smartphones - smartphones don't have sensors capable of detecting radon gas. Any app claiming to measure radon with a phone's built-in sensors is not accurate. She needs a dedicated radon detector or a test kit to get a real reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Monitor Brands and Devices", "question": "My neighbor has a first alert radon detector and it went into alarm mode. How bad is that?", "answer": "Radon alarms typically activate at a set threshold - often around 4 pCi/L, though it varies by device. An alarm state means the level has reached or exceeded that threshold for a sustained period. It's not a run-out-now emergency, but it is a sign that levels warrant professional assessment and mitigation. Radon is a long-term lung cancer risk, not an acute emergency like CO, but it should be addressed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Person Dismissing Risk - Various Relationships", "question": "My uncle keeps saying \"you have to die from something.\" His radon is 9.2. Is that a reasonable attitude?", "answer": "It's a way of coping with risk, but it's not quite rational - you also get to reduce controllable risks, and radon is a very controllable one. The fix is simple, inexpensive relative to most home repairs, and permanent. Choosing to do nothing about a 9.2 isn't zen acceptance of mortality; it's just not acting when the path to action is clear. That's worth a gentle pushback.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Person Dismissing Risk - Various Relationships", "question": "My friend's dad says he's smoked for 40 years and radon won't matter at this point. His radon is 7.5. Is he right?", "answer": "His risk from smoking is very real, but radon and smoking together are dramatically worse than either alone - they multiply each other's effects rather than just adding. Someone who smokes and lives in high-radon air has the highest lung cancer risk of any combination. The very fact that he smokes makes the radon situation more significant, not less.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Person Dismissing Risk - Various Relationships", "question": "My neighbor thinks radon is only in \"certain states\" and that we don't have it here. His house is in the Midwest. Is he right?", "answer": "No. Radon has been found in all 50 states. The Midwest has large areas with significant radon potential - some of the highest residential radon levels in the country come from Midwest states. State-level or county-level generalizations aren't reliable for predicting any individual house's level. The only way to know is to test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Person Dismissing Risk - Various Relationships", "question": "My coworker says her previous house had radon and this one definitely doesn't because \"the houses here are different.\" That seems like magical thinking to me. Am I right to be skeptical?", "answer": "You're right. The type or age of construction tells you very little about radon levels - radon comes from the soil, and a newer or different style of house doesn't have lower geology-induced radon by default. Her previous elevated reading in one house tells her nothing about this one in either direction. Testing is the only answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Person Dismissing Risk - Various Relationships", "question": "My friend's husband told her radon is only dangerous for miners, not homeowners. Where is that coming from and is it true?", "answer": "The miner data is where much of the original radon risk science came from - uranium miners had dramatically elevated lung cancer rates from radon exposure in enclosed underground mines. But the science has since been extended and confirmed for residential settings. The EPA, WHO, and multiple large residential studies confirm that home radon exposure causes lung cancer at lower concentrations than mines but over longer time periods. The miner comparison is used to dismiss the concern, but it's a misreading of the evidence.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Person Dismissing Risk - Various Relationships", "question": "My dad says he tested his house once, it was fine, and he's never testing again. He tested in 1999. Should I push back?", "answer": "Yes. A 1999 test tells you what radon levels were in 1999. Changes to the house - foundation settling, HVAC modifications, landscaping changes, even the natural shifting of soil over 25 years - can alter radon levels. Current EPA guidance suggests retesting every two years as a general practice, or after any major renovation. 1999 is not a current result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Person Dismissing Risk - Various Relationships", "question": "My neighbor thinks opening his crawl space vents will solve his radon problem. His level is 6.9. Will that help?", "answer": "Ventilating a crawl space can reduce radon in some crawl space configurations, but it's not a reliable fix. Results depend heavily on the specific crawl space design, local climate, and seasonal variation. And for a level of 6.9, passive ventilation alone is unlikely to bring levels consistently below 4. A proper encapsulation and depressurization system designed for crawl space mitigation is the reliable approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Person Dismissing Risk - Various Relationships", "question": "My aunt says she read that radon tests are a scam by the testing industry to make money. Is there any merit to that?", "answer": "The concern about industry conflicts of interest isn't entirely unfounded - it's worth buying tests from certified sources and using licensed radon mitigation professionals. But the radon risk itself is not invented by the testing industry. The science is from government research, independent epidemiology, and international health agencies that have no financial interest in promoting radon tests. The risk is real.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My roommate found out our house has radon at 5.3. She wants to fix it but I don't want to spend the money. How do I think about this?", "answer": "At 5.3, the EPA recommendation is to fix. Both of you are breathing the same air. The cost of mitigation is a one-time expense, and it's not typically enormous - getting a quote costs nothing. If you share expenses in the household, splitting a one-time mitigation cost to address an above-action-level reading is a reasonable ask. The risk is shared equally between you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My girlfriend's parents have radon at 6.1 and won't do anything about it. She stays there on weekends. Is she at risk?", "answer": "Weekend stays represent lower cumulative exposure than full-time residency, but if she's there regularly for years, it does add up. The more important thing is that her parents are full-time occupants of a 6.1 pCi/L home, and the risk there is real. She can share the information and concern; ultimately it's their decision. If she's staying there frequently enough that her own exposure matters, that's worth factoring in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My ex has our kids on weekends and I just found out her house has radon at 7.2. What can I do?", "answer": "This is genuinely worth raising. Kids spending regular time in a 7.2 pCi/L home accumulate exposure just like any occupant. You can start by sharing the information calmly and factually - frame it around the kids' health, not as a conflict. If you get nowhere through direct conversation, some states may address radon in co-parenting or custody contexts as part of the home being suitable for children, though that varies by jurisdiction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My boss just found out she has radon at 8.4 at home and she's visibly stressed about it. I don't want to overstep. What do I say if she brings it up at work?", "answer": "If she brings it up, you can offer practical context: \"8.4 is high, but it's fixable - mitigation systems work reliably and it's usually a one-day installation. Once it's done, the level drops and stays low.\" Keeping it practical and solution-focused helps more than dwelling on the risk. If she's spiraling, pointing her toward action - calling a licensed radon mitigation professional - is more useful than more information about the risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My mentor has high radon at 7.0 and asked my opinion. She respects me. What should I say?", "answer": "Be direct and honest: 7.0 is well above the EPA action level of 4.0, and the recommendation is to get it mitigated. It's a fixable problem with reliable solutions. You're not being an alarmist - the EPA guidance and the science support the recommendation. Tell her it's worth getting a licensed radon mitigation professional to look at the house and give her a quote. Once the system is in and confirmed, she won't need to think about it again.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My landlord lives above the units he rents. His unit tested at 1.8 pCi/L. My basement unit tested at 6.2. He keeps saying \"my place is fine so the building is fine.\" What's wrong with his logic?", "answer": "The error is that radon concentrations decrease significantly as you go up from the ground - his upper-floor unit having 1.8 is completely consistent with a basement unit having 6.2. Radon enters from the soil through the foundation, concentrates at the lowest levels, and dissipates in upper floors. His 1.8 says nothing about what's happening at the basement level. Your 6.2 is the relevant number for your unit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My neighbor's adult son lives in the basement of the family home full time and the radon down there is 8.8. The parents don't think it's a problem because they don't go down there much. What's wrong with that reasoning?", "answer": "The parents' limited time in the basement doesn't protect the son who lives there full time. He's accumulating exposure at 8.8 pCi/L continuously. The fact that the main floor levels are lower doesn't change what's happening in his living space. If anything, the basement being his primary living area makes this a more urgent situation than if the basement were just used for storage.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My friend's elderly father lives in an accessory dwelling unit on their property. The ADU tested at 5.5. Do they need to fix it separately from the main house?", "answer": "Yes - the ADU is its own structure with its own foundation and air dynamics. A mitigation system for the main house won't address the ADU. Each structure needs its own assessment and, if levels warrant, its own mitigation. At 5.5, the ADU should be mitigated just as the main house would be.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My sister-in-law is a nurse and keeps saying radon is overblown by the EPA. She's a medical professional - should I take her more seriously than the EPA on this?", "answer": "Nursing training varies widely and typically doesn't include in-depth environmental toxicology or radon-specific risk assessment. Being a medical professional is meaningful expertise, but it doesn't automatically translate to radon science. The EPA's radon guidance is based on decades of epidemiological research and is supported by the WHO, the CDC, and the Surgeon General. It's worth being respectful of her opinion while also recognizing that the scientific consensus doesn't align with it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My neighbor has three young kids and radon at 6.3 in their home. They found out six months ago and still haven't done anything. Should I say something?", "answer": "At some point saying something is the neighborly thing to do. You can do it without pressure: \"I know you found out about the radon - just wanted to make sure you had the info that 6.3 is above where the EPA recommends fixing, especially with kids in the house. Let me know if you want help figuring out who to call.\" You've given them the information twice now. That's what a good neighbor does.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My friend says his contractor told him radon testing is just a way for companies to make more money off homeowners. Should he trust that contractor?", "answer": "A contractor who dismisses radon testing as a money grab is either uninformed about the science or has his own reasons for not wanting to deal with it. Radon is a real, well-documented health concern backed by decades of research. Test kits are inexpensive and available at hardware stores - this is not an industry with massive profit margins driving false alarms. Your friend's contractor is not a reliable source on radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My cousin found out she has radon of 4.0 exactly. Does she have to do anything at exactly 4.0?", "answer": "The EPA action level is 4.0 pCi/L, meaning 4.0 is the threshold where the EPA recommends taking action. So technically, yes - at exactly 4.0, the EPA recommendation is to fix. Even so, a result of exactly 4.0 on a short-term test should ideally be confirmed with a longer test, since there's measurement variability in any test. At or above 4.0 is the fix-it zone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My dad's neighbor told him that radon mitigation didn't work in his house. Is that common?", "answer": "Mitigation that doesn't work is almost always a design or installation issue - wrong fan size, suction point in the wrong location, or incomplete sealing. When done correctly, sub-slab depressurization reliably reduces radon levels. If someone's mitigation \"didn't work,\" they need either a system redesign or a second opinion. A post-mitigation test should always be done to confirm effectiveness.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My uncle bought a radon test kit but put it in his living room because the basement is \"too creepy.\" Will that give him an accurate reading?", "answer": "No. The EPA recommends testing the lowest livable level of the home - the basement, if it's used at all or could be used. Living rooms on upper floors will show lower levels that don't represent the worst-case exposure in the home. If he wants an accurate picture of his radon situation, he needs to move the test to the lowest occupied or usable area.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My friend just found out her office at work has elevated radon. Is workplace radon different from home radon?", "answer": "The health risk is the same - radon doesn't care whether you're at home or at work; it's the cumulative exposure over time that matters. Workplace radon is regulated differently depending on the state and type of building. Your friend can raise the concern with building management or facilities, document the result, and look into her state's guidance on workplace radon. OSHA and state health departments are relevant contacts for workplace exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My aunt asked me if she can smell radon if the level is very high. Like at 15 pCi/L, does it have an odor?", "answer": "No. Radon is a colorless, odorless, tasteless gas. There's no detectable smell at any level - not at 4, not at 15, not at 100. The only way to know it's there is to test. This is part of what makes it worth paying attention to: you genuinely cannot sense it through any normal means.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My dad thinks that because his house has a radon mitigation system, his kids and grandkids don't need to test their houses. Is that logic right?", "answer": "No - radon is site-specific and comes from the soil under each individual home's foundation. His house having a mitigation system says nothing about what's under a different house on a different lot in a different neighborhood. Each house needs its own test. His situation and his kids' situations are independent.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My friend's landlord put a radon monitor in the building and it showed 2.1 pCi/L in the hallway. Her unit is in the basement. Should she trust the hallway reading for her unit?", "answer": "No. Radon concentrations vary by location in a building - a hallway reading, especially on a higher floor, is not representative of a basement unit. The only way to know her unit's level is to test within the unit itself, ideally in the bedroom or the area where she spends the most time. Hallway readings can dramatically underestimate basement unit exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My brother-in-law keeps saying he \"read somewhere\" that radon causes headaches and fatigue. Is that true?", "answer": "No - radon does not cause headaches, fatigue, sore throats, or any acute symptoms. People who believe they're feeling radon exposure are typically experiencing something else entirely. Radon's harm is invisible and symptom-free - it's a long-term lung cancer risk from cumulative radiation exposure that shows up potentially decades later, not in day-to-day symptoms. If your brother-in-law has those symptoms, the cause is something other than radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My neighbor asked if radon can come up through the walls of a basement, not just the floor. Does that change how mitigation works?", "answer": "Radon can enter through floor-wall joints, cracks in walls, and other foundation penetrations - not just the slab. A good mitigation system accounts for this. Sub-slab depressurization creates negative pressure under the entire slab that influences the air in the surrounding soil, which reduces radon entry through walls and joints as well as the floor. The system design considers the full entry picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My friend has a sump pump and she's heard that's a major radon source. Her radon is 4.8. Is the sump pump the culprit?", "answer": "Sump pits and sump pump systems can be significant radon entry points - they're open connections to the sub-slab space and surrounding soil. In homes with sump pits, they're often addressed as part of the mitigation design, either by covering the pit as part of the depressurization system or by capping it. At 4.8, this is worth discussing with a mitigator who will assess all the entry points.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My aunt's house has a finished basement with drywall over the concrete walls. Can mitigation still work?", "answer": "Yes. A finished basement doesn't prevent mitigation - the sub-slab depressurization approach works by creating negative pressure under the slab regardless of what the walls look like above grade. The mitigator typically accesses the sub-slab from a utility area, laundry room, or an inconspicuous location. A finished basement may require slightly more creative access planning, but it doesn't make mitigation infeasible.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My neighbor just had mitigation done and now his radon is showing 3.1 on his monitor, down from 8.4. He's wondering if he should get it lower. Can the system be adjusted?", "answer": "3.1 is a significant improvement from 8.4 - that's a well-functioning system. Going from 8.4 to 3.1 is solidly in the good result range. If he wants to push it lower, sometimes a fan with higher suction capacity or an additional suction point can further reduce levels. It's worth a conversation with the mitigator who installed the system. But 3.1 is not a failing result by any standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My mom said her contractor told her radon is only a health concern if you have a predisposition to lung cancer. Is that accurate?", "answer": "No. Radon is a carcinogen that increases lung cancer risk in the general population - not just in people with genetic predispositions. Elevated radon is a risk factor for lung cancer the way smoking is a risk factor: it raises the probability of cancer in the exposed population regardless of individual baseline genetics. A \"predisposition\" framing misrepresents how radon risk works.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My dad lives in a house with a radon level of 5.4 and my kids spend every other weekend there. How do I think about the risk to them?", "answer": "Kids are more vulnerable than adults to radiation exposure because their cells are dividing more rapidly. Every-other-weekend stays represent lower cumulative exposure than full-time residency, but over months and years they do add up - especially if the kids sleep in the basement or spend time in the lower level. The most practical step is to have a direct conversation with your dad and encourage him to get the system installed. Once it's done, the level in the house drops for everyone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My grandmother's house has a crawl space and she's never tested. Her neighbor's house tested at 7.2. Should I push her to test?", "answer": "Yes, it's worth pushing. A neighbor's elevated result in a geologically similar area is a meaningful signal that the risk in her house isn't trivial. Crawl space homes have their own radon entry dynamics, and a test will tell her what she's actually dealing with. Given the neighbor's result, testing is the responsible next step.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My sister wants to know if she should test every room in her house or just one spot.", "answer": "The EPA recommendation is to test the lowest livable level - the basement, or the first floor in homes without basements. You don't need to test every room; radon levels vary within a home but the worst-case exposure is the lowest level. That's the number used for risk assessment and mitigation decisions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My friend's father was recently diagnosed with lung cancer. He doesn't smoke. She's asking if radon could have been the cause. What do I tell her?", "answer": "Radon is the second leading cause of lung cancer in the U.S. and the leading cause in non-smokers. Without knowing his radon history, there's no way to say it was the cause - lung cancer in non-smokers has multiple possible causes including radon, secondhand smoke, asbestos, and others. But radon is a legitimate consideration and worth mentioning to his oncologist or pulmonologist as part of the full picture. This is a medical conversation, not something to diagnose from a radon test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My coworker's wife is convinced their radon of 4.6 is causing their kids' chronic coughs. Is that possible?", "answer": "No. Radon does not cause coughs, respiratory irritation, or any acute symptoms. It's a long-term lung cancer risk from radiation exposure - it has no effect on the respiratory mucosa that would cause coughing. Chronic coughs in kids should be evaluated by a doctor for actual causes: allergies, asthma, infections, or other environmental irritants. Radon is not the explanation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My friend has a friend who's a contractor who says radon systems \"don't work half the time.\" Should my friend believe him?", "answer": "That's not accurate. When mitigation systems are designed and installed correctly by a certified professional, they reliably reduce radon - post-mitigation testing consistently shows significant reductions. If a system isn't working, it's typically a design or installation issue, not a fundamental limitation of the technology. A general contractor who isn't a state licensed radon mitigation professional isn't a reliable source on this.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My neighbor is using a dehumidifier and thinks it will help with his radon at 5.8. Will it?", "answer": "A dehumidifier treats moisture - it has no effect on radon levels. Radon and humidity are separate issues. Running a dehumidifier in a basement might make the space more comfortable, but it won't reduce his radon reading by any meaningful amount. He needs an actual mitigation system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My mom wants to know if she should leave the house while mitigation is being done. Does she have to?", "answer": "She doesn't have to leave, though some homeowners prefer to be out of the house during installation for convenience. The process typically takes a few hours and doesn't generate significant dust, fumes, or other hazards. The main disruption is some drilling and the sound of work being done. She can stay home or run errands and return when it's done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My dad's radon is 5.0 and his doctor said \"don't worry about it.\" Should he follow that advice?", "answer": "A doctor who says not to worry about a 5.0 radon level isn't giving evidence-based advice on this particular topic. The EPA action level is 4.0, and 5.0 warrants mitigation per current public health guidance. If his doctor is saying \"don't stress about it\" as general reassurance, that's one thing - but if the advice is \"no action needed,\" that's not consistent with what the EPA and major health agencies recommend.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My friend's insurance company said radon is not covered under their homeowner's policy for testing or mitigation. Is that typical?", "answer": "Yes, that's typical. Standard homeowner's policies generally don't cover radon testing or mitigation. It's treated as a home improvement or maintenance expense rather than an insurable event. Some home warranty plans include radon, but those vary. There aren't many insurance pathways for radon costs - it's typically an out-of-pocket home improvement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My neighbor asked me if radon can come back after a mitigation system is installed. Can it?", "answer": "With a properly functioning mitigation system, radon levels stay low as long as the system is operating. The fan runs continuously, maintaining negative pressure under the slab. If the fan fails and isn't replaced, levels can creep back up - which is why periodic retesting and keeping an eye on the system's pressure indicator gauge is important. But a working system doesn't allow radon to \"come back\" - it keeps it out continuously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My aunt is worried that having a radon system will make her house look bad when she sells. Will buyers be scared of it?", "answer": "In most cases, a visible radon mitigation system is not a negative in a sale - knowledgeable buyers recognize it as responsible homeownership. The combination of a system and a post-mitigation test showing low levels tells buyers: \"This house had radon, it was addressed properly, and the current levels are low.\" That's better than no history at all. It can even be a positive differentiator.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My friend's older home has stone foundation walls and a dirt crawl space. She tested at 6.8. Is that a harder fix?", "answer": "Older homes with stone foundations and dirt crawl spaces do present more complex mitigation scenarios than modern poured concrete slabs - there are more potential entry points and the sub-slab may be less defined. But these homes are absolutely mitigable. An experienced mitigator will typically encapsulate the crawl space, seal the foundation as much as feasible, and install a depressurization system designed for that specific structure. Get a quote from someone with experience in older homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My neighbor is a smoker with radon at 7.4. He says he's going to quit smoking instead of fixing the radon. Is that a reasonable trade-off?", "answer": "Quitting smoking is one of the best health decisions he can make - absolutely. But it's not an either-or situation. Smoking and radon together are dramatically more dangerous than either alone. Quitting smoking reduces his risk significantly, and fixing the radon reduces it further. Doing one doesn't make the other irrelevant. The ideal is both.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My dad has radon at 4.2 and is asking if air purifiers would help. What do I tell him?", "answer": "Air purifiers don't reduce radon. Some air purifiers can remove radon decay products (the radioactive particles that attach to dust), which may have a slight indirect effect, but they don't address radon gas itself. This is not an accepted substitute for mitigation. At 4.2, a sub-slab depressurization system is the right answer, not an air purifier.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My friend's parents have a radon level of 3.3 and their doctor told them to \"get it fixed immediately.\" Is the doctor overreacting?", "answer": "3.3 is below the EPA action level of 4.0, so \"fix it immediately\" is a slightly stronger recommendation than the EPA framework would suggest for that level. Mitigation at 3.3 is a reasonable personal choice, but characterizing it as urgent isn't exactly on target with EPA guidance. The doctor isn't wrong that radon in that range carries some risk - but \"immediately\" is more appropriate language for levels above 4.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My sister-in-law is moving from a low-radon house to a new area. Should she automatically get her new house tested even if the previous one was fine?", "answer": "Absolutely. Radon levels are specific to the soil and geology under each house - a low result at her previous address tells her nothing about her new one. Testing within the first few months of moving in is standard practice, and it gives her a baseline for the new home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationships - Additional Scenarios", "question": "My mom found out her house has radon at 5.7 and she mentioned it to her real estate agent who told her \"it's not a big deal anymore.\" Is that accurate?", "answer": "No. 5.7 pCi/L is above the EPA action level and the EPA recommendation to fix hasn't changed. A real estate agent who says elevated radon \"isn't a big deal anymore\" is either uninformed or has a motivation to downplay it. The science and the regulatory guidance haven't softened on radon - if anything, awareness has increased. Your mom should get it mitigated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "More Mom and Dad Scenarios", "question": "My mom keeps saying she's going to call about the radon but never does. It's been four months and her level is 5.3. How do I actually get her to do it?", "answer": "Offer to make the call yourself on her behalf, or sit down with her and make it together. Sometimes the barrier isn't motivation - it's activation energy. A five-minute phone call to get a quote puts the whole thing in motion. If she says yes to you making the call, do it that day.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "More Mom and Dad Scenarios", "question": "My dad says the radon result from when he bought the house 10 years ago was fine, so it's probably still fine now. What changed?", "answer": "Houses change over time - foundations settle, cracks develop, drainage shifts, HVAC systems get modified. Any of these can change how radon moves into the home. A 10-year-old test result is essentially historical data, not a current reading. The only way to know today's level is a current test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "More Mom and Dad Scenarios", "question": "My mom's radon test was done by the home inspector during her purchase two years ago. It came back at 4.1. Should she test again?", "answer": "A result of 4.1 at purchase is right at the EPA action level. If she didn't mitigate then, it's worth testing again now - the level hasn't been addressed, and confirming where it sits today is useful. If it's still around 4 or above, that's a clear case for mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "More Mom and Dad Scenarios", "question": "My dad lives in a condo on the ground floor. Can he have elevated radon?", "answer": "Yes. Ground-floor condos have direct contact with the foundation slab, and radon can enter just like in a single-family home. The building's overall construction and ventilation affect levels, but a ground-floor unit can absolutely test elevated. Testing is the only way to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "More Mom and Dad Scenarios", "question": "My mom has a home with a walkout basement. She asked if radon is typically lower in walkout basements. Is it?", "answer": "Walkout basements can have somewhat better ventilation than fully below-grade basements, but they're not immune to elevated radon. The exposed wall with glass doors doesn't seal the sub-slab - radon still enters through the floor. Testing is the right approach rather than assuming lower levels based on the walkout configuration.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "More Mom and Dad Scenarios", "question": "My dad tested the main floor of his house at 2.6 but never tested the basement. He's assuming the basement must be similar. Is that right?", "answer": "The basement is almost always higher than the main floor. Radon enters at the lowest level and dilutes as it moves upward. A main floor reading of 2.6 could easily correspond to a basement reading of 5 or higher. He should test the basement separately to know what's actually happening at ground level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "More Mom and Dad Scenarios", "question": "My mom had a short-term test done and it came back 6.4. She wants to do another short-term test before deciding on mitigation. Is that reasonable?", "answer": "Doing a follow-up long-term test to confirm is reasonable. But doing another short-term test isn't going to give her a more accurate annual average - short-term tests are inherently variable. If she wants confirmation, a 90-day long-term test is the right approach. If both tests are elevated, she has a clear answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "More Mom and Dad Scenarios", "question": "My dad got a radon test done in his basement and his HVAC guy told him the result was probably high because the test was near the furnace. Is that true?", "answer": "Test placement near a furnace or HVAC equipment can affect results if the equipment is moving air significantly during the test - the guidance is to keep tests away from active HVAC equipment and exterior drafts. If the test was right next to a running furnace, the result might be less reliable. But if the HVAC guy is using that as a reason to dismiss the result entirely, it's worth re-testing in a better location before concluding anything.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Additional", "question": "My sister's apartment tested at 5.1 but her building manager said it's \"within normal range.\" Is that right?", "answer": "5.1 pCi/L is above the EPA action level of 4.0. \"Within normal range\" is misleading - the EPA's recommendation is to fix at or above 4.0. The building manager may be comparing it to some internal standard that's different from EPA guidance, or may be using the phrase to avoid taking action. Your sister should ask specifically whether the level has been compared to the EPA action level of 4.0 pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Additional", "question": "My brother wants to sell his house and the buyer wants him to fix the radon at 5.8 before closing. He's asking if he should fight it. Should he?", "answer": "He should fix it, not fight it. 5.8 is above the EPA action level - the buyer's request is completely reasonable and consistent with standard real estate practice. Refusing to address it could kill the sale or significantly reduce his negotiating leverage. Mitigation is a solvable, finite cost that turns the issue from a liability into a closed item.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Additional", "question": "My sister just found out radon caused her father-in-law's lung cancer. Now she's paranoid about her own house. Her level is 3.1. How do I help her process this?", "answer": "Acknowledge that her concern is understandable, especially given a real and close example of radon's potential consequences. At 3.1, she's below the EPA action level - not in the clear the way 1.0 is, but not in the fix-it-now range either. If she wants peace of mind, getting the level tested with a long-term kit to confirm, and considering mitigation given her family's experience, are both reasonable. Sometimes taking action - even at a lower level - helps more than the technical argument that 3.1 is \"okay.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Additional", "question": "My brother has radon at 6.2 and he's been putting it off for a year and a half. He always has a reason. What's the one argument that might actually move him?", "answer": "Try the framing of what he's already accumulated. Every month of delay at 6.2 pCi/L adds to the cumulative dose with no benefit - there's no upside to waiting. If he'd known about it a year and a half ago and fixed it then, he'd have 18 months fewer of elevated exposure. Extending that logic forward: six months from now, he can either have the problem solved for six months, or he can have another six months of exposure behind him. Which does he want?", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Additional", "question": "My sister's house is on a slab foundation. Can she still have elevated radon?", "answer": "Absolutely. Slab-on-grade construction is one of the most common scenarios where elevated radon is found. Radon enters through joints between the slab and foundation walls, utility penetrations, and small cracks in the slab. Slabs are actually a common target for sub-slab depressurization systems, which work very well in this construction type.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Additional", "question": "My brother and his wife are arguing about whether to mitigate their 5.3 radon level. He says it's fine, she's worried. Who should I side with?", "answer": "On the merits: 5.3 is above the EPA action level of 4.0, and the EPA recommendation is to fix. His wife's position is consistent with established public health guidance. Being supportive of the fix is the right call. The debate itself is more costly in stress and time than just getting the mitigation done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Siblings - Additional", "question": "My sister bought a house with an existing radon system and the system's suction gauge was in the wrong position (no suction showing). What does that mean?", "answer": "A pressure gauge (manometer) on a radon system that shows no differential pressure typically means the fan isn't operating - it may have failed, the power could be off, or there could be a break in the piping. She should check that the fan is plugged in and running, and if the gauge still shows no suction, call a radon mitigator to inspect the system. In the meantime, retesting is worth doing to see what her current levels are.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Grandparents - Additional", "question": "My grandparents are snowbirds and only live in the house six months of the year. Does radon risk still apply?", "answer": "Radon risk is about total cumulative exposure over a lifetime, so six months versus twelve months makes a real difference in annual exposure. But six months of elevated exposure is still six months of elevated exposure - it's not zero. And winter months when the house is occupied are typically when radon levels are higher. It's still worth testing and, if levels are above 4, considering mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Grandparents - Additional", "question": "My grandmother has oxygen therapy at home. Does elevated radon make that situation worse?", "answer": "Radon itself isn't affected by supplemental oxygen - they're separate issues. Radon's harm is from radioactive decay in the lungs, not from oxygen competition. Even so, someone on oxygen therapy often has compromised lung health, which is additional reason to minimize all lung hazards, including radon. If her radon is elevated, addressing it is worthwhile.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Grandparents - Additional", "question": "My grandpa doesn't want to fix radon because he says he's had 50 good years in that house. How do I respond to that?", "answer": "You can respect the sentiment while gently making the practical point: the past 50 years can't be changed, but the next however-many-years can be influenced. And anyone else who uses the house - spouse, family visitors, a caregiver - deserves to be in a lower-radon environment. The fix is simple and doesn't require him to admit the past was a mistake.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Grandparents - Additional", "question": "My grandmother's test came back at 3.8 pCi/L. She's asking if that's the kind of thing she needs to worry about at her age.", "answer": "At 3.8 she's below the EPA action level, so it's not in the urgent category. The EPA does acknowledge risk in the 2-4 range, and whether to act on that at her age is a personal call. At 3.8, many mitigators would suggest confirming with a long-term test before spending money on mitigation. There's no definitive \"must fix immediately\" answer at that level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "In-Laws - Additional", "question": "My father-in-law lives in our basement when he visits for months at a time. Our radon down there is 4.9. Should we be concerned?", "answer": "Yes, someone staying in the basement for months at a time at 4.9 pCi/L is a real exposure scenario. You're already above the EPA action level, and extended stays in the basement compound the cumulative dose for your father-in-law. This is a good argument for moving on mitigation sooner rather than later - it protects him during visits and everyone else in the house long-term.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "In-Laws - Additional", "question": "My mother-in-law says she tested two rooms and got different results - one was 3.1 and one was 6.4. Which one should she use?", "answer": "The higher reading from the lower level is the most meaningful for risk assessment and mitigation decisions. If the 6.4 was from the basement or ground floor and the 3.1 from an upper floor, the 6.4 is the number that drives the decision. The EPA recommendation is to test the lowest livable level for exactly this reason.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "In-Laws - Additional", "question": "My in-laws are building a new house and asking if they should ask for radon-resistant construction. Is it worth it?", "answer": "Yes, it's worth asking. Radon-resistant new construction adds relatively little to the build cost and makes future mitigation - if ever needed - much simpler and less expensive. The rough-in includes a PVC pipe from sub-slab to above the roof; if radon ever becomes an issue, activating the system is as simple as adding a fan. It's inexpensive insurance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbor and Friend - Additional Scenarios", "question": "My neighbor did a short-term test and got 3.9 and then another short-term test the following month and got 5.2. He doesn't know which to believe.", "answer": "Short-term tests vary - they capture a snapshot of conditions during that specific test window. Two short-term results of 3.9 and 5.2 bracket the likely range but don't give him a reliable annual average. A 90-day long-term test would give him a much more representative number to make a decision on. Given both tests, the level is clearly in a range worth monitoring closely.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbor and Friend - Additional Scenarios", "question": "My friend says her building has a radon vent pipe going up through her unit but there's no fan. The previous tenant had no problems. Does she still need to worry?", "answer": "A passive radon vent pipe without a fan relies on natural convection and thermal effects - it doesn't create consistent negative pressure. In some cases passive systems work adequately; in others they don't. Testing is the only way to know if her unit's levels are actually low. If they're elevated, adding a fan to the existing passive pipe is usually inexpensive.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbor and Friend - Additional Scenarios", "question": "My friend has radon at 4.5 and she's asking if she can just move her bedroom upstairs to avoid the basement. Will that help?", "answer": "Moving her primary sleeping space upstairs will reduce her personal exposure, since radon concentrations are typically lower on upper floors. But it doesn't fix the house - the radon is still entering, still present, and still affecting anyone who spends time on lower levels. It's a partial personal workaround, not a solution. And it doesn't help anyone else in the home or address the underlying problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbor and Friend - Additional Scenarios", "question": "My coworker said their radon test result was \"inconclusive.\" What does that mean?", "answer": "Inconclusive results from lab tests usually mean the test was exposed to conditions that compromised accuracy - too much air movement, the test wasn't in place long enough, or the charcoal was disturbed. It doesn't mean radon was or wasn't present. The right step is to retest under proper closed-home conditions following the test kit instructions carefully.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbor and Friend - Additional Scenarios", "question": "My neighbor said he's going to \"wait for spring\" to deal with his radon at 7.0. Is that reasonable?", "answer": "No, there's no practical benefit to waiting until spring. Mitigation can be done any time of year - it's an indoor job and doesn't depend on season. Every month at 7.0 adds cumulative exposure. \"Wait for spring\" is usually procrastination dressed up as a plan.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbor and Friend - Additional Scenarios", "question": "My friend tested her house and got 4.3 pCi/L. She asked her HVAC technician about it and he said to just run the furnace fan continuously to move more air. Will that work?", "answer": "Running the furnace fan continuously increases air circulation and can dilute radon somewhat, but it's not a reliable or consistent fix. Radon levels fluctuate with conditions, and an HVAC approach isn't controlled or targeted. It might lower the average a little, but it won't reliably keep levels below the action level. A proper mitigation system is the designed-for-purpose solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Neighbor and Friend - Additional Scenarios", "question": "My neighbor's house was built on a concrete slab and he says radon systems \"can't work on slabs.\" Is that true?", "answer": "The opposite is true - sub-slab depressurization on a concrete slab is actually one of the most effective and common mitigation configurations. A hole is drilled through the slab, a pipe is installed into the sub-slab material, and a fan creates negative pressure underneath. It works very well on slabs.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Tenants and Rentals - Additional", "question": "My friend wants to test her rental apartment for radon. Her landlord says she's not allowed to test without permission. Is that true?", "answer": "Laws vary by state, but in general a tenant is entitled to test the air quality in their own living space - it's the air they're breathing. Many states have explicit provisions for this. If her landlord is creating barriers to testing her own unit, it may be worth a conversation with a tenant rights organization or her state's health department.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Tenants and Rentals - Additional", "question": "My coworker lives in a ground-floor apartment and their landlord said the building was tested and it was fine. They're skeptical. What should they do?", "answer": "They should ask specifically what was tested, where the test was conducted, and when. If the landlord tested a hallway on a higher floor or a common area, that doesn't represent their specific ground-floor unit. They can request to see the actual test results and placement information. If the landlord is vague or can't produce documentation, running their own test in the unit is the right move.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Tenants and Rentals - Additional", "question": "My sister is a renter and found out her downstairs neighbor's unit has elevated radon. Does that mean her unit does too?", "answer": "Not necessarily. Radon concentrations decrease as you go up in a building. If her neighbor below her on the ground floor has elevated radon, it suggests the building has a radon source - but how much makes it to her unit depends on the floor construction and ventilation. It's a reasonable trigger for her to test her own unit and see what the level is.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Tenants and Rentals - Additional", "question": "My neighbor is a landlord with multiple rental properties. Only one was tested and it came back at 5.8. Should he test the others?", "answer": "Yes. Each property sits on different ground with different geology and construction details. One elevated result doesn't mean all his properties are elevated, but it does raise the general question of what's happening across his portfolio. Testing each property is the only way to know. It's also good risk management from a landlord liability standpoint.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Workplace Radon", "question": "My coworker says her office building is in the basement level of a high-rise and her desk is down there all day. Is that a radon concern?", "answer": "It can be. Basement office spaces have the same dynamics as basement residential spaces - radon enters from the sub-slab and concentrates at the lowest levels. Commercial buildings aren't immune. She can raise the question with building management, facilities, or her HR department, and ask whether air quality testing including radon has been done for that space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Workplace Radon", "question": "My friend works in a school and the school is on a concrete slab. She's worried about radon for the kids. Is that a legitimate concern?", "answer": "Yes, it's a legitimate concern and one that many school districts have addressed proactively. Schools and other occupied buildings on slabs in radon-prone areas are subject to the same radon dynamics as homes. The EPA has specific guidance for schools and other public buildings. Your friend can raise the question with her school's administration and ask about whether the building has been tested.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Workplace Radon", "question": "My coworker's employer says they tested the office for radon three years ago and it was fine. Is that enough?", "answer": "Three years is a reasonable interval if nothing has changed - conditions don't shift as dramatically in commercial buildings as in homes that get renovated or sealed up differently. But \"tested and fine\" is only meaningful if you know where the test was placed and what the level was. If the level was 3.5, that's different from 1.2. It's worth asking for the actual results rather than just the conclusion.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Long-Distance Family Members", "question": "My parents live in another state with high radon levels and I'm trying to help them from far away. Where do I start?", "answer": "Start by finding your parents' state radon program - every state has one, typically through the state health department or environmental agency. They maintain lists of certified testing professionals and licensed radon mitigation professionals. Helping your parents schedule a test or get a quote from a distance is very doable - you find the licensed radon mitigation professional, you make the initial call, and they can handle the rest directly with your parents.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Long-Distance Family Members", "question": "My grandma lives alone three states away and I just found out she's been living with radon at 8.0 for years. I can't be there. What do I do?", "answer": "Call a state licensed radon mitigation professional in her area - you can find one through her state's radon program - explain the situation, and schedule a home visit. Most mitigators will communicate directly with your grandma once you've initiated contact. You don't need to be present. You can follow up with her and with the mitigator by phone. This is very manageable remotely once you get the ball rolling.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Long-Distance Family Members", "question": "My brother lives far away and tested his own house at 6.7. He's asking me for advice. I don't know much about this. What's the essential information to give him?", "answer": "The essentials: 6.7 is above the EPA action level of 4.0, so the recommendation is to mitigate. The standard fix is a sub-slab depressurization system - a pipe from under the foundation, through or outside the house, to above the roof with a small fan. It's a one-day job for a professional. He should look for a state licensed radon mitigation professional in his state - often findable through the state's health department or radon program. Once the system is in, he should test again to confirm it's working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Long-Distance Family Members", "question": "My dad lives alone and I'm worried he won't follow through on the radon mitigation after I bring it up. How do I stay involved without overstepping?", "answer": "Offer to handle the logistics for him - find a mitigator, call and get a quote, even schedule the appointment and just tell him when someone's coming. Many parents who resist \"dealing with it\" will accept help from a child who takes the administrative burden off them. Frame it as \"I looked this up and made a few calls, all you have to do is let them in.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Information and Education Scenarios", "question": "My friend just learned about radon for the first time. She's asking me what it actually is. How do I explain it simply?", "answer": "Radon is a naturally occurring radioactive gas that comes from uranium breaking down in the soil. It's colorless and odorless - you can't detect it without a test. It seeps into buildings through cracks and gaps in the foundation, where it can build up to levels that meaningfully increase lung cancer risk over years of exposure. The fix is a ventilation system that pulls it out from under the foundation before it gets inside.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Information and Education Scenarios", "question": "My neighbor asked me how radon causes cancer. I want to give him an accurate, simple explanation.", "answer": "Radon decays into radioactive particles called radon progeny or radon daughters. When you breathe in radon, those particles can get trapped in your lungs, where they emit small bursts of radiation directly into lung tissue. Over years, that accumulated radiation damage can lead to lung cancer. It's not an immediate effect - it's cumulative, which is why long-term exposure at elevated levels is the real concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Information and Education Scenarios", "question": "My sister keeps confusing radon and carbon monoxide. What's the difference?", "answer": "Carbon monoxide is produced by combustion - furnaces, car engines, gas appliances - and it's acutely dangerous, causing symptoms quickly at high levels and death at extreme concentrations. Radon is a naturally occurring radioactive gas from soil that has no immediate symptoms and causes harm only over years of cumulative exposure. They both require different detectors. A carbon monoxide alarm won't detect radon and vice versa.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Information and Education Scenarios", "question": "My coworker asked if radon is worse in certain seasons. I think so but I'm not sure. What's accurate?", "answer": "Radon is generally higher in winter in most homes. When a house is closed up for cold weather, the tighter building envelope traps more radon. The temperature differential between inside and outside also increases the stack effect that draws radon upward from the soil. Summer levels, with open windows and more air exchange, tend to be lower. This is why winter testing tends to give a more realistic worst-case picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Information and Education Scenarios", "question": "My friend wants to know if living near power lines or a radon area on a map means her house definitely has high radon. How do I answer?", "answer": "Neither power lines nor proximity to a radon-zone boundary tells you anything certain about her specific house's level. EPA radon zone maps show average potential by county, not house-level risk - and houses within high-zone counties can test low while houses in low-zone counties can test high. There's no shortcut to knowing the level in her specific house; she has to test it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Information and Education Scenarios", "question": "My neighbor asked me if radon levels in a house change when the family is home versus when no one is there. Does that matter?", "answer": "Radon levels can fluctuate based on HVAC activity, windows and doors, and other factors tied to occupancy - like furnaces running or people opening and closing doors. For testing purposes, the EPA recommends closed-home conditions (windows and doors closed for 12+ hours before and during testing) to get a more consistent and representative result. The level the family experiences during normal occupancy is what matters for health, and closed-home testing approximates that.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Information and Education Scenarios", "question": "My aunt asked me if she can fix radon herself with products from the hardware store. Is DIY a realistic option?", "answer": "There are DIY radon mitigation components available, and some homeowners do install systems themselves. The risk is that system design matters - choosing the right suction point location, fan size, and configuration for the specific home's sub-slab conditions isn't always straightforward. A system installed without understanding the sub-slab airflow can fail to reduce levels adequately. If she goes the DIY route, she should still test after installation to confirm it worked.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Information and Education Scenarios", "question": "My friend said she read that granite countertops can cause elevated radon. Could that explain her 5.4 reading?", "answer": "Granite does contain trace amounts of uranium and can emit small amounts of radon, but the contribution from countertops is typically very small compared to the amount entering through the foundation from soil. If her level is 5.4, the countertops are almost certainly not the primary cause - the foundation is. Mitigation targeting the sub-slab is the right approach, not replacing countertops.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0236", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Information and Education Scenarios", "question": "My uncle asked me why his neighbor's house has low radon while his is high if they were built by the same builder. Aren't they the same?", "answer": "Same builder, same year, same style doesn't mean same soil. Radon levels depend on what's in the ground directly under and around each foundation - uranium concentration in the soil, which varies at small geographic scales. Two houses built identically side by side can have dramatically different radon levels because the ground beneath them is different. That's why individual testing is the only reliable method.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0237", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Information and Education Scenarios", "question": "My mom wants to know if moving to a newer house means less radon risk. Does house age matter?", "answer": "House age is not a reliable predictor of radon levels. Older homes may have more cracks and entry points, but newer homes are often built tighter with less air exchange, which can trap radon more effectively. The soil under the house is what determines radon potential - a new house on uranium-rich soil can have higher radon than an old house on low-uranium soil. Every house needs to be tested regardless of age.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0238", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "New Information and Education Scenarios", "question": "My friend is asking if there are natural ways to reduce radon. She doesn't want to install a system.", "answer": "Natural approaches - opening windows, ventilating, keeping the house well-aired - can temporarily reduce radon but are not consistent, controllable, or appropriate as the only strategy for elevated levels. There's no plant, supplement, filtration product, or passive technique that reliably reduces radon to consistently low levels the way a properly designed mitigation system does. For levels above the EPA action level, mitigation is the right answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0239", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Testing Decisions and Next Steps", "question": "My mom got a short-term radon test from the hardware store. My dad thinks those tests are unreliable. Is he right?", "answer": "Charcoal canister short-term tests from hardware stores, when used correctly and sent to a certified lab, are a legitimate first step for radon assessment. They're not as precise as long-term tests, but they're a real data point. If the result is elevated, the right follow-up is a long-term test to confirm - not dismissing the result outright. The EPA recommends them as a screening tool.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0240", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Testing Decisions and Next Steps", "question": "My aunt wants to test her house but doesn't know where to put the test. What should I tell her?", "answer": "The test goes in the lowest livable level of the home - the basement if there is one and it's used at all, or the first floor if there's no basement. It should be placed in a room that's used regularly (not a bathroom or laundry room), away from exterior doors, windows, and HVAC vents. At least a foot off the floor, and ideally two to four feet above the ground. Keep windows and exterior doors closed for at least 12 hours before and during the test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0241", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Testing Decisions and Next Steps", "question": "My neighbor bought a long-term test and wants to know how long to leave it out for the best result.", "answer": "Long-term tests are designed to stay in place for 90 days to a year. A full 90 days is the commonly recommended minimum for a good long-term average. Leaving it for a full year gives you the most complete picture of seasonal variation, but 90 days is the standard for decision-making purposes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0242", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Testing Decisions and Next Steps", "question": "My friend's house tested at 5.1 on a short-term test. She wants to know if she should test again before getting mitigation, or just get the mitigation done.", "answer": "At 5.1, she has a clear result above the EPA action level. She can either do a long-term test to confirm, or go ahead with mitigation. Some homeowners choose to mitigate directly at that level without a second test - the result is in a range where the decision is already clear. If she wants confirmation, a long-term test is the responsible route. Either way, the path ends at mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0243", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Testing Decisions and Next Steps", "question": "My mom tested her house and the test result she got back from the lab just shows a number. How does she know what to do with it?", "answer": "If the number is below 2.0 pCi/L, levels are low and no action is needed. From 2.0 to 3.9, the risk is lower but real - consider a long-term test to confirm, and mitigation is an option. At 4.0 and above, the EPA recommends fixing. At 4.0 or higher, she should call a state licensed radon mitigation professional and get a system installed. The number from the lab is the whole answer; there's nothing else hidden in the report that changes what to do.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0244", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Testing Decisions and Next Steps", "question": "My brother tested his house twice and got 4.8 and 6.1 in two different rooms in the basement. Which one should he use?", "answer": "For decision-making, the higher of the two readings is more conservative and appropriate to act on. Both rooms are above the EPA action level, so the decision to mitigate would be the same regardless. If he wants to know his \"official\" level, re-testing in the room most commonly occupied at the lowest level of the home would give him the most meaningful number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0245", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My aunt is a real estate agent and she told me radon is only a concern in \"radon belt\" states. Is she right?", "answer": "No. The \"radon belt\" or EPA Zone 1 refers to regions with higher average potential, but elevated radon is found in every state. Real estate agents are in a profession where they interact with radon frequently, but not all of them are accurate on the science. The only reliable answer for any specific house in any location is a test of that house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0246", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My neighbor is a handyman and told my mom he can fix her radon by sealing the cracks in her basement floor with hydraulic cement. Will that work?", "answer": "Sealing cracks is part of a comprehensive mitigation approach, but on its own it's not an effective fix. Radon enters through more pathways than visible cracks - floor-wall joints, utility penetrations, block walls, and porous concrete itself. Sealing alone typically doesn't produce meaningful, sustained radon reductions. It's a support measure within a full mitigation system, not a standalone solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0247", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My coworker's wife is an environmental scientist and says their 4.6 pCi/L is \"nothing to worry about.\" I'm skeptical. Is an environmental scientist automatically right about radon?", "answer": "Environmental science is a broad field and doesn't automatically confer expertise in radon risk assessment specifically. The EPA action level of 4.0 and the established health guidance applies at 4.6 regardless of professional background. If she disagrees with the EPA's risk framework, that's an informed scientific opinion worth hearing, but the consensus position from major health agencies is that 4.6 warrants fixing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0248", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My friend's mom has radon at 7.3 and a smoking history. How do those two things interact?", "answer": "They interact very badly. Radon and smoking are synergistic risk factors for lung cancer - meaning they multiply each other's effects rather than just adding. The lung cancer risk for a smoker living with elevated radon is dramatically higher than the risk from either alone. If her mom has a smoking history and a 7.3 radon level, addressing the radon is especially important.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0249", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My dad is asking if he should get a second test from a different company to confirm his 5.8 result. Is that necessary?", "answer": "A second test isn't strictly necessary at 5.8, but it's not unreasonable if he wants high confidence before spending on mitigation. If he does retest, a long-term test is more useful for confirmation than another short-term test. If two tests - or a long-term test - come back above 4, the decision is clear. At 5.8 on a properly conducted test, the result is meaningful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0250", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My mom tested her house and got 3.0 pCi/L in the fall. She's asking if she needs to test again in winter.", "answer": "Fall is a decent testing season - closer to typical conditions than summer. Winter would generally produce a similar or slightly higher result. If she wants the most conservative picture, a winter test or a long-term test that spans fall through winter would be more definitive. At 3.0, the result is below the action level, but confirming with a long-term test is reasonable given the proximity to 4.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0251", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My grandmother has dementia and lives in memory care. Should I be asking about radon at that facility?", "answer": "It's a reasonable question to raise with the facility. Memory care facilities are typically on the ground floor or have ground-level common areas where residents spend much of their time. Whether the building has been tested and what the protocol is for elevated radon are legitimate questions to ask in a care planning context. Radon exposure affects long-term residents in care settings just as it affects homeowners.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0252", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My neighbor said his house was mitigated three years ago and he never retested. Should he?", "answer": "Yes. A post-mitigation test should have been done shortly after installation to confirm the system was working, and a retest every two years is generally recommended to verify the system continues to perform. If his system hasn't been tested since installation, running a test now would tell him whether the fan is still functioning effectively and the levels are staying low.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0253", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My dad is asking if he should turn off his radon system in the summer when the windows are open. Will that help anything?", "answer": "No, he shouldn't turn it off. The system works year-round and turning it off removes the consistent negative pressure that keeps radon from entering. Open windows reduce radon in summer on their own, but they're not a controlled substitute for the system. Running the mitigation system year-round is the right approach - it's designed to run continuously and the operating cost is minimal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0254", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My uncle's house has block foundation walls. He was told radon systems don't work well on block walls. Is that true?", "answer": "Block walls do present a mitigation challenge because the hollow cores of concrete blocks can allow radon to migrate laterally and enter through the top of the wall. In block foundation homes, mitigation sometimes requires additional steps - such as sealing the top course of blocks or adding a suction point inside the wall cores. It's more complex than a standard poured concrete approach but absolutely solvable by a mitigator experienced with block foundations.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0255", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My friend's landlord put a dehumidifier in the basement and told her that fixes the radon. Does it?", "answer": "No. A dehumidifier removes moisture from the air - it has no effect on radon gas whatsoever. Radon and humidity are completely separate issues. If the landlord is suggesting the dehumidifier addresses radon, they either misunderstand the problem or are not engaging in good faith. Your friend should press for an actual radon test result and, if levels are elevated, for proper mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0256", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My sister is asking whether she needs to tell her kids about the radon situation while she gets it fixed. How much should kids know?", "answer": "There's no need to alarm young children. For older kids and teenagers, keeping it simple and factual works: \"We found out there's a gas in the basement that's not good to breathe over time, so we're getting a system installed to fix it. It'll be done soon.\" Framing it as a problem with a clear solution - not a scary ongoing situation - is the right tone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0257", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My neighbor's teenage son spends most of his time in his bedroom in the basement. Their radon is 6.8. Should they be extra concerned about him?", "answer": "Yes, the combination of full-time basement residency and a developing body is a meaningful factor. Kids and teens are generally more sensitive to radiation exposure than adults. A teenager spending most waking and sleeping hours in a 6.8 pCi/L basement accumulates significant exposure over the years of living there. This is a good argument for prioritizing mitigation promptly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0258", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My aunt bought a house that previously had a meth lab. She heard radon testing might be off in that kind of house. Is there any connection?", "answer": "Radon is unrelated to chemical contamination from drug manufacturing. A house with a prior meth lab history has a completely different set of remediation concerns (residual chemicals on surfaces), but radon testing is just as valid as in any other house. The two issues are separate. She should address the meth contamination concerns through an industrial hygienist and test for radon independently.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0259", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My friend has a radon level of 4.9 and a brand new baby. How does she think about this with an infant in the house?", "answer": "An infant spending time in a home with 4.9 pCi/L radon is accumulating early-life exposure, and children may be more sensitive to radiation effects than adults. 4.9 is above the EPA action level, so the case for getting mitigation done is clear - and the presence of a young child adds extra motivation to do it sooner rather than later. This is a good time to move on it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0260", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My dad has been putting off radon mitigation for two years since he found out his level is 6.1. He keeps saying \"I'll get around to it.\" How do I actually get him to do something this time?", "answer": "Pick one thing and do it for him: find a licensed radon mitigation professional in his area, call and get a quote, and give him the specific information - who it is, what they'll do, what it costs. Remove every decision except \"yes, go ahead.\" Sometimes people who procrastinate on this kind of thing aren't resistant to fixing it - they're resistant to the friction of figuring out who to call. Handing him a ready-to-go solution often breaks the logjam.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-family-neighbor-scenarios-0261", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My neighbor told me she read that the EPA is planning to lower the radon action level. Is that true?", "answer": "The EPA's current action level is 4.0 pCi/L, and the EPA has historically suggested that levels below that, particularly in the 2-4 pCi/L range, also carry real risk worth considering. There have been discussions in the scientific community about whether the threshold should be revisited, but as of current published guidance, 4.0 pCi/L is the action level. If the guideline is ever revised, it would likely move lower rather than higher - another reason not to be complacent at 3.5 or 3.8.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0262", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My friend is asking whether radon in water is different from radon in air. Her well water has elevated radon. Does that matter?", "answer": "Radon in well water can contribute to indoor radon levels - when water is used for showers, washing dishes, or laundry, radon can be released into the air. However, for most homes, waterborne radon is a smaller contributor than soil-sourced radon entering through the foundation. Both are worth knowing about. Elevated radon in well water should be addressed at the water source (point-of-entry treatment) as a separate issue from air mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0263", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My coworker's house tests at 5.6 and he's been living there for 15 years. He's 55. He's wondering if the damage is already done and whether fixing it now matters.", "answer": "The past exposure can't be undone, but stopping future exposure definitely matters. He likely has decades ahead of him, and every year of reduced exposure going forward reduces cumulative lifetime risk compared to continuing at 5.6. \"The damage is done\" thinking treats this like a past event when it's actually an ongoing one. Fixing it at 55 is very much worth doing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0264", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My mom wants to know if getting a radon mitigation system will affect her resale value positively or negatively.", "answer": "Generally it's a positive - or at worst neutral. A properly installed system with documented post-mitigation test results showing low levels signals to buyers that the issue was found and professionally addressed. Many buyers view an existing mitigation system favorably because it removes the uncertainty. It's better than an undisclosed elevated level, and in most markets it's better than disclosing an elevated level without having fixed it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0265", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My friend's mom just got a radon test kit in the mail as a freebie from her county health department. Is that worth using?", "answer": "Yes - free county-distributed test kits are typically legitimate charcoal canister tests that get sent to a certified lab. They work the same way as kits you'd buy at a hardware store. Following the instructions carefully and sending the canister in on time is what matters. A free kit from a health department is a real test, not a gimmick.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0266", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My uncle keeps the windows open all year because he lives in a mild climate. He has radon at 4.3. Could the open windows be keeping it lower and masking a bigger problem?", "answer": "Exactly right. Open windows year-round dilute indoor radon and can significantly understate what levels would be in a closed-up house. 4.3 with open windows could be 7 or higher if the house were sealed for winter. If he ever closes the house seasonally, or if a future owner does, the actual radon situation could be considerably worse than what he's seeing now. A test under more typical closed conditions would give a clearer picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0267", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My neighbor's college-age kid is moving back home into the basement for a year after graduation. The house has radon at 6.2 that nobody ever fixed. Should I say something?", "answer": "Yes, gently is fine. The calculus on radon is affected by how much time someone spends in the space - a young adult living full-time in a basement at 6.2 pCi/L for a year or more is accumulating real exposure at a meaningful rate. Sharing that context with your neighbor - framed around their kid's health rather than as a critique - is the neighborly thing to do. The fix is simple, and this is a natural time to do it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-family-neighbor-scenarios-0268", "phase": "phase3", "type": "answered_qna", "topic": "workflow-family-neighbor-scenarios", "category": "workflow-family-neighbor-scenarios", "subtopic": "Specific Relationship Scenarios - Final Group", "question": "My dad has radon at 5.6 and my mom keeps saying \"we've never had any problems.\" How do I explain why that logic doesn't work?", "answer": "Radon doesn't cause any problems you can observe while it's happening - no cough, no headache, nothing. The harm is a statistical increase in lung cancer risk that accumulates invisibly over years. \"No problems so far\" is exactly what you'd expect to say with elevated radon, right up until the point when there's a problem. The absence of symptoms isn't evidence that the exposure is harmless.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "workflow-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Is radon dangerous?", "answer": "Yes, radon is genuinely dangerous - it's not a scare tactic or a contractor's trick. It's a radioactive gas that forms naturally from uranium in the soil, it seeps into homes, and when you breathe it in over time, the radioactive particles can damage lung tissue. The EPA estimates radon causes about 21,000 lung cancer deaths in the United States every year. It's a real risk, but it's also a fixable one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "How dangerous is radon really, or is this overblown?", "answer": "The risk is real and it's backed by decades of research - this isn't overblown. What's true is that radon works slowly, over years of exposure, not days or weeks. But that doesn't make it less serious. About 21,000 Americans die from radon-related lung cancer each year, which makes it the second leading cause of lung cancer in the country. The good news is it's one of the most preventable environmental health risks we have.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "How dangerous is radon at 4 pCi/L?", "answer": "At 4 pCi/L - the EPA's action level - the risk is real enough that the EPA says you should fix it. Their estimate is that roughly 7 out of 1,000 non-smokers living at that level for a lifetime have an elevated lung cancer risk because of it. For comparison, that's a higher risk than most environmental exposures we regulate. It's not a \"drop everything and leave your house\" emergency, but it's not something to shrug off either.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Is radon at 2 pCi/L dangerous?", "answer": "At 2 pCi/L you're at roughly the national average, and the EPA acknowledges there's still some risk - they just say it becomes worth considering mitigation anywhere between 2 and 4 pCi/L. No level has been proven completely without risk. If you're in that range, the question is whether you want to reduce it further, and that's a personal decision worth talking through.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "What is a safe radon level?", "answer": "There's no level that's been definitively proven to carry zero risk - radon is a carcinogen at any measurable amount. The EPA sets 4 pCi/L as the action level where you should fix, and considers 2-4 pCi/L a range where mitigation is worth considering. The average indoor radon level in the U.S. is around 1.3 pCi/L, which is used more as a baseline than a \"safe\" target. Most mitigation systems can get levels down to 1.0 pCi/L or lower, which is about as low as you can reasonably get.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "How many people die from radon each year?", "answer": "The EPA estimates approximately 21,000 people die from radon-induced lung cancer in the United States every year. That puts it well above carbon monoxide poisoning deaths and makes it one of the larger preventable causes of cancer death in the country. It doesn't get as much attention as it should, partly because it's invisible and the disease takes years to develop.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Is radon the number one cause of lung cancer in non-smokers?", "answer": "Yes. Radon is the leading cause of lung cancer among people who have never smoked. The American Cancer Society and the EPA both recognize it as such. That's actually one of the reasons it's worth taking seriously even if nobody in your household has ever touched a cigarette - the risk falls entirely on the cumulative radiation, not lifestyle.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Is radon the leading cause of lung cancer in non-smokers?", "answer": "That's correct. Among people who've never smoked, radon is the number one cause of lung cancer. Smoking still accounts for a much higher total number of lung cancer cases overall, but for non-smokers, radon is the single biggest environmental risk factor for that disease.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "How does radon cause lung cancer?", "answer": "Radon decays into radioactive particles called radon progeny or \"daughters.\" When you breathe those particles in, they can lodge in the lining of your lungs. As they continue to decay, they emit radiation directly into lung tissue. Over years of cumulative exposure, that radiation can damage DNA in lung cells in a way that eventually leads to cancer. It's not a chemical reaction - it's physical radiation damage, similar in principle to other radiation exposures.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "How long does it take for radon to cause lung cancer?", "answer": "Radon-related lung cancer typically develops over many years to decades of cumulative exposure - it's not something that happens from a short-term spike. Most cases involve people who spent years or decades living or working in elevated radon environments. That's actually what makes this risk feel abstract to people: there's no immediate warning sign, no sick feeling, no way to know it's happening until a cancer develops much later.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Can short-term high radon exposure cause lung cancer?", "answer": "A brief acute exposure - say, spending a few hours in a space with extremely high radon - is not going to cause lung cancer. The risk is about cumulative dose over long periods. That's true of most radiation-related cancer risks. The concern is years of breathing elevated levels in your home, not a single bad reading on a given day.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Is radon exposure cumulative or does it reset?", "answer": "Radon exposure is cumulative. The radiation damage to lung cells builds up over time. Even so, your body also has some capacity to repair DNA damage, and the risk from any given year is small on its own - it's the years adding up that create the elevated lifetime risk. Reducing your exposure going forward - by fixing your home - genuinely lowers your ongoing risk, even if you can't undo past exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Is radon more dangerous than other household hazards like carbon monoxide or lead paint?", "answer": "In terms of annual deaths, radon kills more Americans than carbon monoxide - roughly 21,000 versus about 400-500 per year. Lead paint causes serious harm too, especially to children's neurological development. They're different kinds of risks that aren't really ranked on the same scale, but radon's death toll makes it one of the most significant environmental health hazards in the home. It just gets less attention because the effects are slow and invisible.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Is radon more dangerous than asbestos?", "answer": "Both are serious lung-cancer carcinogens, and you should take both seriously. Radon causes more total deaths per year in the U.S. than asbestos-related diseases at this point, largely because asbestos has been heavily regulated and removed from many settings. The mechanisms are different - asbestos causes mesothelioma and asbestosis from fiber inhalation, while radon causes lung cancer through radiation - but neither one is something to wave away.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Is radon more dangerous than secondhand smoke?", "answer": "Radon and secondhand smoke are both lung cancer risk factors, and they're actually dangerous to compare directly because they tend to occur together in homes. Radon kills about 21,000 people a year in the U.S.; secondhand smoke is estimated to cause about 7,000 lung cancer deaths per year. So radon's toll is actually higher. The combination of radon and any smoke in the home - first or secondhand - is significantly more dangerous than either one alone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Is living with 5 pCi/L radon the same risk as smoking cigarettes?", "answer": "The EPA uses comparisons like that to give people context, and a level around 5 pCi/L carries a risk they compare to smoking roughly half a pack of cigarettes a day over a lifetime for a non-smoker. It's a rough analogy to make the risk feel concrete, not a precise medical equation. The point is that 5 pCi/L is meaningfully elevated - not catastrophic, but well worth fixing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "I've heard radon at 20 pCi/L is like smoking two packs a day. Is that true?", "answer": "The EPA's comparative risk table does put very high radon levels in the range where the lifetime lung cancer risk approaches that of a heavy smoker. These comparisons are ballpark estimates intended to communicate scale - they're not clinical predictions for any individual. What's accurate is that very high radon levels carry very significant lung cancer risk, and the higher the level, the more urgent the fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "How does my radon level compare to the national average?", "answer": "The U.S. average indoor radon level is about 1.3 pCi/L. The EPA recommends taking action at 4.0 pCi/L or above, and considering mitigation between 2.0 and 4.0 pCi/L. So if your reading is at 4 or above, you're well above the national average and the EPA says fix it. If you're between 2 and 4, you're above average and it's worth a conversation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "My neighbor said radon is just a scam the mitigation companies made up. Is there truth to that?", "answer": "The science on radon is solid - it's not industry-manufactured. The research comes from mining epidemiology studies, underground worker health data, and large-scale residential studies going back decades. The National Academies of Sciences, the EPA, the World Health Organization, and virtually every major public health body in the world recognize it as a Class A carcinogen and a real residential hazard. It's one of the better-studied environmental risks we have.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Does radon only matter in certain states or regions?", "answer": "Radon can be elevated anywhere - it depends on the geology under your specific property, not just your state or region. EPA radon zone maps can give you a general idea of relative risk by county, but plenty of homes in \"low-risk\" zones test high, and plenty of homes in \"high-risk\" zones test fine. The only way to know your actual level is to test your specific home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Is radon a bigger risk in older homes or newer homes?", "answer": "Radon doesn't discriminate by age. Older homes can have more cracks and gaps that let radon in, but they also often have older, leakier construction that lets it escape. Newer homes that are tightly sealed can actually accumulate radon at higher concentrations precisely because they're better insulated. The only reliable way to know is to test - age of the home is not a reliable predictor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Does radon come up through the water too?", "answer": "Radon can enter drinking water, particularly from private wells that draw from underground rock. When you run the tap or shower, radon in the water can release into the air. This is generally a smaller contribution to total indoor radon than soil entry through the foundation, but it's worth testing water radon if you're on a well and your air levels are elevated without an obvious source.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Is Radon Actually Dangerous?", "question": "Can outdoor air radon levels be a concern?", "answer": "Outdoor radon disperses into the atmosphere quickly and averages around 0.4 pCi/L - low enough that it's not a meaningful health concern. The problem is when radon enters enclosed spaces like a basement or crawl space and concentrates. Indoor air is where the risk lives.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "How Radon Causes Harm - The Biology", "question": "Does radon cause any cancer besides lung cancer?", "answer": "The primary and well-established risk from radon is lung cancer - that's where the radioactive particles deposit when you breathe. There have been some studies looking at stomach and kidney cancers in high-radon populations, but the evidence there is much weaker. Lung cancer is the clear, established concern, and that's what the entire regulatory framework is built around.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "How Radon Causes Harm - The Biology", "question": "Can children get lung cancer from radon?", "answer": "Lung cancer from radon is overwhelmingly a disease that develops in adulthood after decades of cumulative exposure. Children aren't immune to the radiation effects, but they're not going to develop lung cancer as children from radon exposure. The concern is that childhood exposure contributes to total lifetime dose - the cancer risk comes much later, in adulthood. Reducing exposure now matters for long-term health, even for kids.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "How Radon Causes Harm - The Biology", "question": "Is radon worse in the winter?", "answer": "Radon levels can run higher in winter in many homes for a few reasons: windows and doors are sealed, reducing dilution from outside air, and the temperature differential between indoors and outdoors can actually draw more soil gas up through foundation gaps. So if you test in winter and get an elevated reading, that's a legitimate reading - not an outlier to dismiss.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "How Radon Causes Harm - The Biology", "question": "Does radon cause cancer slowly or quickly?", "answer": "Slowly - always slowly. Radon-related lung cancer develops from years to decades of cumulative radiation exposure. There's no documented case of radon causing lung cancer from a short-term or acute exposure. The process involves accumulated DNA damage that eventually leads to cellular changes, and that takes years. This is also why people underestimate the risk - there's no immediate signal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "How Radon Causes Harm - The Biology", "question": "Does radon damage DNA directly?", "answer": "Yes. The radioactive particles released as radon decays - called radon progeny - emit alpha radiation when they lodge in lung tissue. Alpha particles are very short-range but deposit a lot of energy, and that energy can directly break or damage DNA strands in lung cells. Repeated damage over years, if not repaired accurately by the cell, can eventually lead to cancerous mutations.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "How Radon Causes Harm - The Biology", "question": "Is radon radiation the same kind of radiation as an X-ray?", "answer": "They're both ionizing radiation but different types. X-rays are gamma radiation - they pass through the body. Radon primarily emits alpha particles, which don't penetrate far at all (they can't even get through a sheet of paper from outside the body). The danger is that you inhale the particles, so the alpha radiation is being delivered directly inside lung tissue at very close range, which is why it causes damage.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "How Radon Causes Harm - The Biology", "question": "Can radon affect my liver or kidneys?", "answer": "The established risk from inhaled radon is concentrated in the lungs - that's where the radioactive decay particles deposit and cause radiation damage to tissue. Other organs are not meaningfully exposed from airborne radon. Waterborne radon can potentially affect the stomach, but even that evidence is much weaker. The lung cancer risk is the central, well-documented concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "How Radon Causes Harm - The Biology", "question": "Does everyone who lives with high radon get lung cancer?", "answer": "No. Elevated radon exposure increases the probability of lung cancer - it doesn't warranty it. Many people live for years with elevated radon and never develop lung cancer. The risk is statistical and cumulative. But the fact that most people don't get it doesn't mean the risk isn't real - it means you're dealing with a probability that adds up over time, not a certainty.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-health-worry-general-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "Can radon cause symptoms?", "answer": "Radon doesn't cause any acute symptoms. You can't feel it, smell it, or sense it in any way. There's no cough, no headache, no sore throat, no fatigue - none of that comes from radon exposure. It works through cumulative radiation damage over years, not through any immediate chemical irritation. If someone feels sick in a high-radon home, something else is causing those symptoms.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "Does radon cause headaches?", "answer": "No. This is a common misconception and I want to be clear: radon does not cause headaches. Headaches from environmental exposures in the home are more commonly related to carbon monoxide, VOCs, poor ventilation, or mold. Radon is a long-term lung cancer risk from cumulative radiation exposure - it has no acute neurological symptoms.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "Does radon cause shortness of breath?", "answer": "Radon does not cause shortness of breath as a direct symptom. Shortness of breath has many possible causes - respiratory illness, allergies, asthma, heart conditions - but not acute radon exposure. If you're having breathing issues, talk to your doctor about those symptoms separately. Radon's harm is about long-term lung cancer risk, not immediate respiratory irritation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "Does radon cause fatigue?", "answer": "No. Radon doesn't cause fatigue, brain fog, or tiredness. It operates on a completely different timescale - years of cumulative radiation damage to lung cells, not any kind of immediate energy-draining effect. If you're experiencing fatigue, it's worth looking into other causes, but radon isn't one of them.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "I feel sick in my basement. Could radon be making me sick?", "answer": "Radon won't make you feel sick in any way you can perceive - it has no acute symptoms. If you genuinely feel unwell in your basement, the more likely culprits are carbon monoxide from a furnace or water heater, mold, poor ventilation causing VOC buildup, or even just low oxygen in a very tight space. Get a CO detector down there immediately and take the sick feeling seriously - just look at the right culprit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "What are the symptoms of radon exposure?", "answer": "There are no symptoms of radon exposure in the way you'd experience with most toxins. Radon is a long-term lung cancer risk - the harm builds silently over years through radiation damage to lung tissue. By the time lung cancer develops, the disease itself causes symptoms, but those come decades after the exposure began. If you're wondering whether radon is hurting you right now, the honest answer is you cannot feel it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "I've read online that radon causes sore throats. Is that true?", "answer": "That's not accurate. Sore throats are not a documented symptom of radon exposure. Radon is an odorless, tasteless gas that causes lung cancer through long-term radiation damage - it doesn't irritate your throat or upper airways acutely. If you're seeing that claim online, it's misinformation. The harm from radon is real, but it's entirely long-term and invisible.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "Can radon cause nausea?", "answer": "No. Radon doesn't cause nausea. It has no acute effects on the digestive system or central nervous system. Radon causes lung cancer through decades of cumulative radiation exposure to lung tissue - it's not the kind of hazard that makes you feel sick in real time. If something in your home is making you nauseous, look at carbon monoxide, mold, or other air quality issues.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "Does radon cause coughing?", "answer": "Radon itself doesn't cause coughing as a symptom of exposure. However, a persistent cough in a long-term smoker or former smoker who has had elevated radon exposure can be a warning sign worth getting evaluated by a doctor - not because radon causes a cough directly, but because lung cancer can. If you've had significant radon exposure and you have a new or changing cough, mention both to your doctor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "Can you smell radon?", "answer": "No. Radon is completely odorless, colorless, and tasteless. You cannot detect it with any of your senses. This is one of the things that makes it dangerous - there's no warning signal. The only way to know if you have elevated radon is to test for it with a proper detector or test kit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "I've been in a radon-mitigated home for years. Should I expect to feel better health-wise now?", "answer": "Radon mitigation reduces your ongoing exposure going forward - it's not a treatment and you won't feel a difference day to day, since radon doesn't cause any symptoms you can perceive. The benefit is a lower lifetime risk of lung cancer. Think of it like reducing your exposure to UV radiation - you don't feel the sun damage while it's happening, but reducing it matters over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "Can radon make an existing lung condition worse?", "answer": "There's no evidence that radon causes immediate worsening of conditions like asthma or COPD in the short term. Radon's mechanism is long-term radiation damage that contributes to cancer risk, not acute airway inflammation. Even so, if you already have compromised lungs from any cause, reducing every potential respiratory insult - including radon - is a sensible approach to overall lung health.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "I have asthma. Does radon make it worse?", "answer": "Radon doesn't trigger or worsen asthma attacks directly - asthma is caused by airway inflammation, and radon doesn't work that way. What radon does is increase long-term lung cancer risk through radiation exposure. If you have asthma, your lungs are already under stress, and it's reasonable to want to reduce every unnecessary risk to your lung health - but radon won't cause an acute asthma flare.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Symptoms and Acute Effects", "question": "Does radon hurt your lungs right away or only after years?", "answer": "Only after years of cumulative exposure. There's no immediate lung damage from breathing radon - no irritation, no inflammation, nothing you can perceive. The harm is radiation damage to lung cell DNA that accumulates over years and can eventually lead to cancer. That's what makes it both dangerous and easy to ignore.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Smoker and Former Smoker Risk", "question": "Is radon more dangerous if you smoke?", "answer": "Yes, significantly more dangerous. Radon and cigarette smoking have a synergistic effect on lung cancer risk - meaning they multiply each other rather than just adding together. Smokers who live with elevated radon have a substantially higher lung cancer risk than either factor alone would suggest. The EPA's risk tables show this clearly: a smoker at 4 pCi/L faces a much higher lifetime risk than a non-smoker at the same level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Smoker and Former Smoker Risk", "question": "How much more dangerous is radon for smokers vs non-smokers?", "answer": "The EPA estimates that a smoker living with radon at 4 pCi/L has roughly a 62 in 1,000 lifetime lung cancer risk from the combination - compared to about 7 in 1,000 for a non-smoker at the same level. That's not just adding the two risks together; smoking and radon interact in a way that makes the combined risk far greater than either one alone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Smoker and Former Smoker Risk", "question": "My husband smokes and our radon is 4.5 pCi/L. Is that a much bigger risk?", "answer": "Yes, that combination is meaningfully more dangerous than radon or smoking alone. The two risks multiply each other rather than just add. Your husband's overall lung cancer risk from the combination is significantly higher than a non-smoker in the same home would face. The most effective thing is both: fix the radon and address the smoking - but either one helps.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Smoker and Former Smoker Risk", "question": "I smoke and the basement where I watch TV has radon at 5.0 pCi/L. Should I be very worried?", "answer": "Honestly, yes - that's a combination worth taking seriously and fixing quickly. Spending significant time in a space with 5.0 pCi/L radon while smoking is one of the higher-risk scenarios for lung cancer. I'd prioritize getting that basement level down, and I'd also encourage you to talk to your doctor about both the smoking and the radon exposure history.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Smoker and Former Smoker Risk", "question": "My brother smokes and refuses to fix his radon. How do I explain the combined risk to him?", "answer": "Tell him the combination is what gets people. Each one alone raises risk - together, they multiply. The EPA's numbers show a smoker at 4 pCi/L has nearly a 1-in-16 lifetime chance of dying from radon-related lung cancer. That's not a remote statistical abstraction - it's a real number. And mitigation is a one-time fix, not an ongoing chore. It's worth the conversation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Smoker and Former Smoker Risk", "question": "My ex-husband smoked in the house for 20 years and we had high radon. What should I do now?", "answer": "The first thing I'd say is: reduce your ongoing exposure now by fixing the radon if it's still elevated. You can't undo the past, but you can stop adding to the cumulative dose. For your health going forward, make sure you're up to date on lung cancer screening guidelines - talk to your doctor about your exposure history. That's not meant to alarm you, just to make sure you have the right surveillance in place.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Smoker and Former Smoker Risk", "question": "I quit smoking 10 years ago. My radon is 4.2. What is my risk level?", "answer": "Former smokers do have meaningfully elevated lung cancer risk compared to never-smokers, and that doesn't fully go away - though it does decrease over time after quitting. At 4.2 pCi/L and a history of smoking, your combined risk is higher than a never-smoker at that level. The EPA says fix at 4 pCi/L. Given your smoking history, I'd be inclined to fix it and then talk to your doctor about whether low-dose CT lung cancer screening is appropriate for you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Smoker and Former Smoker Risk", "question": "I quit smoking 5 years ago. Does that reduce my radon risk compared to someone who still smokes?", "answer": "Yes, quitting reduces your lung cancer risk over time, and the longer you've been quit, the more your risk has declined. You're not at the same level as a never-smoker, but you're in a better position than someone who's still smoking. At 5 years post-quit, your synergistic risk with radon is still elevated compared to a never-smoker, so if your radon is above 4, that's still worth fixing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Smoker and Former Smoker Risk", "question": "My husband smokes and refuses to quit. We just got a high radon reading. Which is more dangerous, the smoking or the radon?", "answer": "Smoking causes far more total lung cancer deaths than radon does, so in terms of absolute risk to your husband, smoking is the bigger driver. But radon adds significantly on top of that - and it's the one you can fix with a mechanical solution. You can't control the smoking decision, but you can control the radon level in the house. I'd fix the radon regardless of the smoking situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Smoker and Former Smoker Risk", "question": "If someone quits smoking and also fixes their radon, do both risk reductions stack?", "answer": "Yes. Both risk reductions are real and they do stack. Fixing radon eliminates the ongoing radiation exposure. Quitting smoking gradually reduces the elevated lung tissue damage from combustion byproducts. Together, you're reducing two independent contributors to lung cancer risk. Neither one fully erases prior exposure, but both make a meaningful difference to long-term health.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Smoker and Former Smoker Risk", "question": "My dad smoked for 30 years, quit, and now we find out his radon is 6. Should we be really worried?", "answer": "That history warrants taking the radon seriously and fixing it promptly. His lung tissue has already taken cumulative hits from 30 years of smoking, and continued elevated radon exposure adds to that burden. The honest answer is: fix the radon now, and talk to his doctor about lung cancer screening. Former heavy smokers already qualify for low-dose CT screening under current guidelines - add the radon history to that conversation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Past Exposure Worry and Guilt", "question": "I've lived in my house for 20 years and just found out my radon is 6 pCi/L. Have I already been harmed?", "answer": "I understand why that's a scary realization. The truth is that 20 years of elevated radon exposure has increased your statistical risk of lung cancer - there's no way to honestly say otherwise. But increased risk doesn't mean you've definitely been harmed or that cancer is inevitable. What matters now is: fix the radon to stop adding to the cumulative dose, and talk to your doctor about your exposure history so they can guide you on any appropriate monitoring or screening. You can't change the past, but you can protect the next 20 years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Past Exposure Worry and Guilt", "question": "I grew up in a house with high radon. Am I at higher risk now?", "answer": "Childhood exposure to radon contributes to your total lifetime radon dose, which does factor into lung cancer risk. How much depends on how high the levels were, how long you lived there, and other factors like smoking. The honest answer is yes, it adds to cumulative exposure. The practical answer is: make sure your current home is tested and levels are low, and talk to your doctor about your history if you have concerns about lung cancer risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Past Exposure Worry and Guilt", "question": "My childhood home had high radon - like 8 pCi/L. Should I be worried about my lungs now?", "answer": "Years of childhood exposure at 8 pCi/L is a meaningful part of your lifetime radon dose. I wouldn't tell you to panic, but I'd take it seriously. The most productive thing you can do now is make sure wherever you live today has low radon - reduce the ongoing exposure you can control - and mention your childhood exposure history to your doctor. They can help you think through whether any lung cancer screening is appropriate for your specific situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Past Exposure Worry and Guilt", "question": "We ignored a high radon test 5 years ago. What's our risk now?", "answer": "Five years of elevated radon exposure has added to your cumulative dose, and that's genuinely unfortunate. But the risk builds slowly, and fixing it now meaningfully changes your risk going forward. Think of it this way: if you'd been adding one brick at a time to a wall, stopping now doesn't remove what's already there, but it prevents the wall from getting any taller. Fix it now, reduce your ongoing exposure, and talk to your doctor if you want to assess where you stand health-wise.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Past Exposure Worry and Guilt", "question": "Is it too late to fix radon if I've already been exposed for years?", "answer": "It is never too late to fix radon. Mitigation stops your ongoing exposure - it eliminates the radiation you would have breathed over the next 10, 20, 30 years. The past exposure is fixed and cannot be changed, but future exposure is entirely in your control. The sooner you fix it, the less cumulative dose you'll accumulate. People fix radon in their 70s and 80s and it still reduces their ongoing risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Past Exposure Worry and Guilt", "question": "I feel so guilty that my kids may have been exposed to high radon for years. What do I do?", "answer": "That guilt is understandable, but I want you to hear this clearly: you didn't know. Most people don't know they have high radon until they test, and most people never test. What matters now is fixing it so the exposure stops - that's the most protective thing you can do for them going forward. Kids' radon exposure contributes to lifetime risk, but it doesn't determine their destiny. Fix the home, talk to your pediatrician if you have specific concerns, and move forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Past Exposure Worry and Guilt", "question": "My husband says if the radon was going to kill us we'd already be sick. Is he right?", "answer": "That's a very common way of thinking about it, and it's understandable - but it's not how radon works. Radon doesn't cause any symptoms while it's harming you. The damage is radiation injury to lung cells that accumulates silently over decades. By the time lung cancer develops, you've been exposed for years without any signal that anything was wrong. The absence of symptoms right now tells you nothing about what the exposure has been doing quietly in the background.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Past Exposure Worry and Guilt", "question": "We found out 10 years into living here that our radon was around 8. We fixed it immediately. Are we okay?", "answer": "You made the right call by fixing it promptly when you found out. The 10 years of prior exposure is part of your cumulative dose - I won't pretend otherwise. Whether that exposure has meaningfully elevated your specific cancer risk depends on factors including your age, smoking history, and other health variables. The ongoing risk has been addressed. For peace of mind and appropriate surveillance, a conversation with your doctor about your radon exposure history is worthwhile.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Past Exposure Worry and Guilt", "question": "My daughter is angry that she grew up in a high-radon home and is worried about her lung health. What should I tell her?", "answer": "Tell her the truth: that you didn't know, that most families don't test, and that as soon as you found out you took action. The damage from the past can't be undone, but her ongoing exposure risk is now addressed. Encourage her to talk to her doctor about her history - not in a panic, but so she has the right information in her medical record. Lung cancer screening is increasingly available for people with elevated risk factors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Past Exposure Worry and Guilt", "question": "My mother lived in a high-radon home for 40 years before it was tested. She never smoked. What's her risk?", "answer": "Forty years of elevated radon exposure as a non-smoker is a significant cumulative dose, and I'd be doing you a disservice to minimize it. It meaningfully increases her lifetime lung cancer risk. The practical steps: make sure wherever she's living now is at a low radon level, and bring this history up with her doctor. Low-dose CT lung cancer screening has been shown to catch cancers early in high-risk populations, and her doctor can assess whether that's appropriate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Past Exposure Worry and Guilt", "question": "My brother died of lung cancer and never smoked. Could radon in his house have been a factor?", "answer": "It's possible, and radon is the leading known cause of lung cancer in non-smokers. Unless his home was tested, you can't know for certain. I wouldn't tell you that radon definitely caused it, but it's a real possibility worth acknowledging - especially if it motivates you and other family members to test your own homes. If anyone in his immediate family still lives in that house, getting a test is a meaningful way to honor what he went through.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Past Exposure Worry and Guilt", "question": "My parents lived in high-radon conditions for 30 years and they're both fine. Does that mean radon isn't that dangerous?", "answer": "Their good health is genuinely good news, and I don't want to minimize it. But it's also how probability works - not everyone who smokes gets lung cancer either, and that doesn't mean smoking isn't dangerous. Radon raises the statistical risk across a population, and most individuals at any given risk level won't develop cancer. That doesn't change the risk for the next person who stays in that same home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Elderly and Older Adults", "question": "My 80-year-old mother's radon is 5.5. Is it worth fixing at her age?", "answer": "Yes, it's still worth fixing. Lung cancer typically takes years to develop, and an 80-year-old can still meaningfully benefit from reduced ongoing exposure - especially since the concern is about quality of life and avoiding a cancer diagnosis at advanced age. The mitigation process is also not disruptive for her; it doesn't require her to leave the house for long. The honest answer is that at any age, breathing cleaner air is better than the alternative.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Elderly and Older Adults", "question": "My parents are in their 70s and have lived with high radon for decades. Should we fix it now?", "answer": "I'd still fix it. They've accumulated decades of exposure already, but stopping the ongoing exposure reduces future risk. Lung cancer at 75 or 80 is a devastating diagnosis, and if mitigation can meaningfully reduce the chance of that, it's worth doing. The cost of mitigation is modest compared to the cost - financial and human - of a late-stage cancer diagnosis.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Elderly and Older Adults", "question": "My elderly father refuses to fix the radon. Is there anything I can say to persuade him?", "answer": "Sometimes it helps to reframe it away from fear. Instead of \"you might get lung cancer,\" try: \"this is something we can actually fix.\" Mitigation is a one-time mechanical installation - a pipe, a fan, a sealed gap or two. The house will have lower radon permanently after that. If he's concerned about disruption or cost, address those specifically. And if he has a primary care doctor he trusts, having that doctor mention it can carry more weight than a family member pushing for it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Elderly and Older Adults", "question": "At what age does it stop being worth it to fix radon?", "answer": "There's no clean cutoff age where it stops mattering. Lung cancer can develop in people in their 70s and 80s, and reducing ongoing exposure reduces that risk at any age. The calculation changes somewhat with age and overall health - someone who's 90 with multiple serious conditions faces a different risk-benefit picture than a healthy 72-year-old. But in general, if someone is otherwise healthy and has elevated radon, fixing it is still a reasonable choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Elderly and Older Adults", "question": "My grandfather is 85 and his radon is 7. What's the honest answer - is it worth it?", "answer": "Honestly? If he's otherwise healthy and active, yes. A lung cancer diagnosis at 87 or 88 is not a trivial outcome to accept if it could have been reduced. The mitigation installation itself is not hard on a homeowner - it doesn't require them to do anything or leave the house for long. At 7 pCi/L that's a meaningfully elevated level. I'd say fix it and stop the ongoing exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Elderly and Older Adults", "question": "Is radon cancer risk still relevant for people in their 60s?", "answer": "Absolutely. The latency period for radon-related lung cancer is long, but that doesn't mean 60-somethings are past the risk window. A 65-year-old who continues to breathe elevated radon for the next 20 years is accumulating dose during a period when cancer risk overall is rising. Fixing radon in your 60s can meaningfully protect your health in your 70s and 80s.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Elderly and Older Adults", "question": "My 75-year-old mother is a smoker and her radon is 5 pCi/L. How bad is that combination at her age?", "answer": "That's a combination I'd want fixed quickly. A 75-year-old smoker has already had substantial lifetime exposure to two major lung cancer risk factors. Adding ongoing elevated radon on top of that increases the risk of developing lung cancer in the coming years - years that matter a great deal to her quality of life. Mitigation removes one of those two factors permanently. I'd prioritize it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Elderly and Older Adults", "question": "My aunt is 82 and says she's too old to worry about radon. Should I push back?", "answer": "It depends on her overall health and how she thinks about quality of life in her remaining years. If she's active, engaged, and expects to live many more years, lung cancer at 85 or 88 would be a serious loss of that time. The mitigation is a non-invasive fix. It might be worth framing it not as \"worry about cancer\" but as \"this is something we can just take off the list so nobody has to think about it again.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Elderly and Older Adults", "question": "Is radon harder on older lungs than younger lungs?", "answer": "Older lungs may have reduced capacity for DNA repair and less resilience against cellular damage compared to younger tissue. That suggests the same level of radon exposure might carry somewhat greater risk in an older person. This is one more reason - not less - that reducing exposure in older adults makes sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Children, Pregnancy, and Family Exposure", "question": "Is radon more dangerous for kids than adults?", "answer": "Children breathe faster than adults and spend more time in lower parts of the home, so their exposure can be proportionally higher in some cases. More importantly, children have longer life expectancy ahead of them - meaning early exposure contributes to a longer period of cumulative lifetime dose. Radon-related lung cancer develops over decades, so earlier exposure means more time for risk to accumulate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Children, Pregnancy, and Family Exposure", "question": "Should I be more worried about radon because I have young kids?", "answer": "Young children have more years of life ahead of them, which means early radon exposure contributes to a longer lifetime cumulative dose. The concern isn't that they'll get lung cancer as children - it's that exposure in childhood is part of their lifetime radiation burden. If your home has elevated radon, fixing it is particularly worthwhile when kids are in the picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Children, Pregnancy, and Family Exposure", "question": "My baby's nursery is on the ground floor. Should I test specifically for radon near where she sleeps?", "answer": "It's worth knowing what the radon level is on the lowest level of the home, which would be most relevant to ground-floor rooms. Radon is typically highest at the lowest level and decreases on upper floors. If your nursery is on the first floor with a basement or crawl space below, testing that area gives you the most relevant data. A standard test placed on that level for 48-96 hours will give you a good picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Children, Pregnancy, and Family Exposure", "question": "Is radon dangerous during pregnancy?", "answer": "There's no specific evidence that radon exposure causes birth defects or harm to a developing fetus - the primary concern is lung cancer risk to the mother from long-term cumulative exposure. Even so, most people's general approach during pregnancy is to reduce any avoidable exposure to carcinogens, and radon is one you can actually control. Testing and mitigating during pregnancy is a reasonable precaution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Children, Pregnancy, and Family Exposure", "question": "Can radon exposure cause miscarriage or birth defects?", "answer": "The evidence doesn't support a direct link between residential radon exposure and miscarriage or birth defects. Radon's established harm is lung cancer from long-term cumulative radiation in lung tissue. If you're pregnant and have elevated radon, the main concern is your own long-term lung health - and fixing it benefits both you and anyone else living in the home going forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Children, Pregnancy, and Family Exposure", "question": "My kids spend a lot of time in the basement. Is that a concern if radon is elevated?", "answer": "Yes, that's worth paying attention to. Radon tends to be highest in the lowest level of the home - basements and lower floors - because it seeps in from soil and concrete. The more time your kids spend in that space, the higher their cumulative exposure will be. If you have an elevated reading in the basement and kids using it regularly, that's a concrete reason to prioritize fixing it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Children, Pregnancy, and Family Exposure", "question": "We turned our basement into a playroom and then found out radon is 5.5. How worried should I be?", "answer": "That's a situation worth taking seriously. A basement playroom with elevated radon and kids spending significant time there is a meaningful exposure scenario - not an emergency that requires evacuating, but something to fix promptly. Get the mitigation done, retest afterward, and once you confirm levels are down to 2 or below you can be confident the space is much safer for regular use.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Comparing Radon to Other Hazards", "question": "Is radon more dangerous than carbon monoxide?", "answer": "In terms of annual deaths in the U.S., radon kills far more people than carbon monoxide - roughly 21,000 versus about 400-500 per year. Carbon monoxide kills quickly, which makes it a more dramatic and immediate hazard. Radon kills slowly and silently over years. Both are invisible, both need detectors, both are serious. But radon's body count is substantially higher.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Comparing Radon to Other Hazards", "question": "Is radon more dangerous than mold?", "answer": "Mold and radon cause different types of harm and are hard to rank directly. Mold causes respiratory irritation, allergic reactions, and can be particularly serious for people with respiratory conditions or immune issues. Radon causes lung cancer from cumulative radiation exposure. In terms of mortality, radon's toll (21,000 deaths/year) is substantially higher than mold-related deaths. Both are worth addressing in a home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Comparing Radon to Other Hazards", "question": "Is radon more dangerous than lead paint?", "answer": "They're serious but different kinds of hazards. Lead paint causes neurological damage, particularly in children who ingest it - and it's especially devastating for developing brains. Radon causes lung cancer from long-term radiation exposure. Both are real environmental health threats worth addressing. In terms of raw annual mortality, radon's toll is higher - but lead's effects on children's development make it uniquely damaging in a different way.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Comparing Radon to Other Hazards", "question": "Is radon more dangerous than drinking alcohol?", "answer": "That's an interesting comparison because they operate very differently. Alcohol has a complex relationship with multiple types of cancer and other health effects. Radon specifically and directly increases lung cancer risk. Comparing them statistically is difficult. What's true is that radon's contribution to lung cancer mortality (21,000 deaths/year) is well-documented and the intervention to reduce it is a one-time mechanical fix. They're really separate decisions, not tradeoffs.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Comparing Radon to Other Hazards", "question": "My wife is more worried about pesticides in our food than radon. How do I put the risks in perspective?", "answer": "Most environmental health researchers would say radon deserves at least as much concern as dietary chemical exposures, if not more. Radon is responsible for a well-documented 21,000 deaths per year from lung cancer - a specific, measurable outcome with a clear causal chain. The relative risk from low-level pesticide residues in food is much harder to quantify and generally much lower. Both are real, but radon is one of the more preventable causes of cancer death we know of.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Comparing Radon to Other Hazards", "question": "Is radon a bigger risk than UV radiation from the sun?", "answer": "Skin cancer from UV exposure causes far more total cancer cases per year than radon, but most skin cancers are non-melanoma and highly treatable. Radon causes lung cancer, which has a very high mortality rate - roughly 70% of lung cancer patients die from it. In terms of preventable cancer deaths, radon is one of the more serious single-source risks out there. UV is more common; radon is more deadly per case.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Comparing Radon to Other Hazards", "question": "How does radon risk compare to flying on a plane?", "answer": "The radiation dose from a cross-country flight is real but very small - roughly equivalent to a chest X-ray. Radon exposure in a high-level home over years is a much more significant cumulative radiation dose by comparison. The analogy sometimes made is that a high-radon home exposes you to more radiation annually than you'd get from regular commercial flying. They're different types of radiation too - cosmic radiation from flying versus alpha radiation from radon decay.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Comparing Radon to Other Hazards", "question": "Can radon affect my pets?", "answer": "Pets breathe the same air you do, so yes - they're exposed to the same radon levels you are. Animals can develop lung cancer, and there's some research suggesting elevated radon could contribute to lung cancer in pets like dogs, who spend significant time in low areas of the home. You're unlikely to be testing for your dog's sake alone, but the fact that they're breathing the same air reinforces that the level matters for everyone in the household.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Comparing Radon to Other Hazards", "question": "My dog was just diagnosed with lung cancer and our radon is 8. Could radon have caused it?", "answer": "Radon exposure in dogs has been studied and is considered a possible contributor to lung cancer in animals, particularly larger dogs who may spend more time in lower areas of the home. I can't tell you definitively that radon caused your dog's cancer - many factors contribute. But an 8 pCi/L home with a dog with lung cancer is a situation worth noting. Fix the radon for your own and your family's health, regardless of what caused your dog's illness.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Comparing Radon to Other Hazards", "question": "Do pets show signs of radon exposure before humans do?", "answer": "Not in any documented way. Radon doesn't cause any acute symptoms in people or animals - the harm is long-term radiation damage leading to cancer. Pets aren't early warning indicators for radon. The only way to know your radon level is to test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Health Screening and Medical Questions", "question": "Should I get a lung cancer screening because of radon exposure?", "answer": "Low-dose CT screening is currently recommended for people ages 50-80 who have significant smoking history (20 pack-years) and are current smokers or quit within the past 15 years. Radon exposure alone doesn't currently qualify you for the standard guideline criteria, but if you've had significant radon exposure combined with a smoking history, talk to your doctor - the guidelines are evolving, and your doctor can help assess whether screening makes sense for your individual situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Health Screening and Medical Questions", "question": "What is a low-dose CT scan and should I get one because of my radon exposure?", "answer": "A low-dose CT (LDCT) scan is an imaging test that can detect early-stage lung cancer before symptoms develop. It's proven to reduce lung cancer mortality in high-risk populations. Currently, major guidelines recommend it for people with a substantial smoking history, but if you've had years of significant radon exposure - especially combined with any smoking history - it's worth discussing with your doctor whether LDCT screening is appropriate for you specifically.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Health Screening and Medical Questions", "question": "I've lived in a high-radon home for 15 years. What should I tell my doctor?", "answer": "Tell them exactly what you told me: how long you lived there, roughly what the levels were (if known), and any smoking history. This gives them context to assess your lung cancer risk and decide whether any monitoring or screening is appropriate. Doctors appreciate having this kind of environmental exposure history. It goes into your medical record and may affect recommendations for monitoring down the road.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Health Screening and Medical Questions", "question": "Does my doctor need to know about my radon exposure?", "answer": "Yes, it's worth mentioning. Radon exposure history is relevant to lung cancer risk assessment, and your doctor can factor it into recommendations for screening or monitoring. Most people don't think to mention it, and many doctors don't ask. Being proactive about documenting it in your medical history is a good practice, especially if you've had significant exposure over many years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Health Screening and Medical Questions", "question": "Is there a blood test or any medical test that can tell me if radon has already hurt my lungs?", "answer": "There's no blood test or simple screening that can detect radon-related lung damage before cancer develops. The early stages of radiation damage to lung cell DNA are not detectable through conventional medical testing. Imaging - specifically low-dose CT - can detect early lung cancers, but it detects the cancer itself, not precancerous radon damage. This is another reason why early screening in high-risk individuals is valuable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Health Screening and Medical Questions", "question": "Can radon exposure be detected on a chest X-ray?", "answer": "Radon damage to lung cells isn't visible on a chest X-ray unless it has already progressed to a tumor or other visible lung abnormality. Chest X-rays also aren't sensitive enough to catch early lung cancer reliably. Low-dose CT scanning is far superior for early lung cancer detection. A normal chest X-ray doesn't tell you that your lungs are unaffected by past radon exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Health Screening and Medical Questions", "question": "What is the radon exposure limit for workers?", "answer": "OSHA regulates occupational radon exposure, and the limit is typically expressed in working level months (WLMs) rather than pCi/L. Miners and underground workers have historically been the primary regulated population for radon. The occupational limits are generally more lenient than what the EPA recommends for homes - one of the interesting quirks of how radon is regulated. In a residential context, the EPA's 4 pCi/L action level is the standard guidance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Health Screening and Medical Questions", "question": "Does radon exposure show up in any kind of health test?", "answer": "Not in any way that measures past exposure or current damage level. There's no radon biomarker in blood or urine that tells you how much radiation you've accumulated. The only real tool for knowing what you've been exposed to is the air testing you do in your home - pCi/L readings over time give you an idea of cumulative exposure. After that, it's about lung cancer surveillance rather than a damage measurement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Health Screening and Medical Questions", "question": "My pulmonologist mentioned radon when I told him about my lung nodule. Should I be concerned?", "answer": "Yes, take it seriously. A pulmonologist connecting radon exposure to a lung nodule is practicing good medicine - they're considering all possible contributing factors. Most lung nodules are benign, but they warrant follow-up, and your radon history is a relevant piece of context. Follow your doctor's recommended surveillance schedule, and make sure your home radon is fixed if it hasn't been already.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Health Screening and Medical Questions", "question": "I was diagnosed with lung cancer and I never smoked. Could radon be the cause?", "answer": "Radon is the most likely single environmental cause of lung cancer in non-smokers, so yes - it's a plausible and important question to raise with your oncologist. Whether a specific cancer was caused by radon versus another factor generally can't be determined - the cellular appearance of radon-induced lung cancer is not distinctive. But your radon history is relevant information for your medical team and for any related support or legal considerations.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "How do I explain radon risk to someone who thinks it's overblown?", "answer": "Stick to the numbers: 21,000 deaths per year, second leading cause of lung cancer in the country, ranks above carbon monoxide in annual deaths. It's not a chemical the media invented - it's been studied for decades starting with underground miners who had extraordinarily high lung cancer rates. The EPA action level exists because the science supports it. The fix is a one-time mitigation job, not a lifestyle overhaul.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "Can you explain radon risk without making it sound terrifying?", "answer": "The risk is real but manageable, and it works slowly - it's not a drop-everything emergency. Think of it the way you'd think about UV exposure or secondhand smoke: it's something that builds up over years, it meaningfully raises a specific health risk, and reducing your exposure makes a genuine difference. At 4 pCi/L, the EPA says fix it. Fixing it is a one-time mechanical job and then you don't have to think about it again.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "What are my actual chances of getting lung cancer from radon at 5 pCi/L?", "answer": "The EPA's risk estimates for a never-smoker at 5 pCi/L over a lifetime of exposure are in the range of roughly 9 in 1,000 - or about 0.9%. For context, that's a higher probability than the risk from many environmental hazards we spend money regulating. For a smoker at the same level, the risk is dramatically higher. These are statistical estimates, not individual predictions, but they're based on solid epidemiology.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "Is 3 pCi/L a level I should worry about?", "answer": "The EPA says it's worth considering mitigation between 2 and 4 pCi/L, so 3 pCi/L falls in the \"worth thinking about\" zone. It's below the formal action level of 4.0, but the risk there isn't zero. Whether you decide to mitigate at 3 is a personal decision. If you have a smoking history, kids in the home, or will be in the house long-term, I'd lean toward fixing it. If you're renting short-term, it's less urgent.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "My radon fluctuates between 2 and 6 depending on the time of year. What should I use for risk assessment?", "answer": "For long-term risk assessment, the average over time is what matters - not the peak. If your levels spike to 6 in winter and drop to 2 in summer, a long-term annual average might be somewhere in the 3-5 range, which is still worth addressing. A 90-day test during typical living conditions gives you a better picture of annual average than a short-term test. That average is your best proxy for cumulative exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "What number do I give my doctor when I'm describing my radon level?", "answer": "Give them the test result in pCi/L (picocuries per liter), which is the standard unit used in the U.S. Tell them how long you've lived in the home at that approximate level if you know, and whether levels have changed after any mitigation. The more specific you can be, the more useful it is for their assessment of your exposure history.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "What does pCi/L mean and how do I understand it?", "answer": "pCi/L stands for picocuries per liter - it's a measure of the concentration of radioactive radon atoms in a liter of air. One picocurie equals a very small amount of radioactive decay per minute. The EPA uses this unit for all residential radon guidelines. You don't need to understand the physics - just know that the EPA action level is 4.0, the national average is about 1.3, and higher numbers mean more radiation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "Is there a difference between radon risk in someone with a genetic predisposition to cancer?", "answer": "People with certain genetic predispositions to lung cancer or radiation sensitivity may indeed face a higher individual risk from the same radon exposure levels. The general risk tables from the EPA don't account for individual genetics. If you have a family history of lung cancer - especially in non-smokers - it's worth discussing your radon history with a doctor who can factor in your personal risk profile.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "Is radon risk the same for people with COPD as for healthy people?", "answer": "The risk tables for radon are based on general populations and don't specifically break out people with existing lung disease. It's reasonable to assume that people with COPD or other lung conditions may face a somewhat different risk profile - both because their lung function is already compromised and because radon-related cancer developing on top of existing disease may be harder to detect and treat. Reducing radon exposure is a sensible protective step for anyone with existing lung disease.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "My insurance company asked about radon. Does radon affect my homeowners insurance?", "answer": "Radon typically doesn't affect homeowners insurance directly - it's not usually covered or excluded in standard policies because it's a health risk rather than property damage in the conventional sense. Where radon shows up more commonly is in real estate transactions, as part of inspection and due diligence. If an insurer is asking about it, it may be in the context of a specific rider or environmental liability question - worth asking them directly what they're looking for.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "I can't stop thinking about radon since I got my test results. Is this level of worry normal?", "answer": "It's very common - finding out your home has elevated radon can feel alarming, especially when you can't see or sense it. What usually helps people is taking action: getting a mitigation estimate, understanding the fix is proven and not complicated, and knowing that once it's done you can move on. The worry is more manageable when you have something concrete to do about it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "I had a panic attack after reading about radon risk. How do I put it in perspective?", "answer": "Take a breath. Radon is a real risk, but it's a slow, cumulative one - not an emergency that requires you to leave your home. The harm comes from years of exposure, not days or weeks. You have time to make a plan, get a quote, and fix it properly. The good news is that radon is one of the few cancer risks you can actually do something definitive about. Once it's fixed and retested, you move on.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "My husband thinks I'm overreacting about radon. How do I know if I'm being reasonable?", "answer": "Taking radon seriously is not overreacting - it's appropriate. The EPA estimates it kills 21,000 Americans a year, which is a significant public health toll. At the same time, it's not a reason to panic, abandon your home, or spend sleepless nights worrying. The measured response is: test, understand the results, fix if indicated, retest. If you're beyond that into persistent health anxiety, that's worth talking to someone about separately.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "Is it normal to feel scared after finding out your radon is 8?", "answer": "Yes, and 8 pCi/L is legitimately elevated - twice the EPA action level. It's worth taking seriously and fixing promptly. But \"promptly\" doesn't mean evacuate tonight; it means get a mitigation contractor in for an assessment and get it done in the next few weeks. Radon works over years, and the weeks it takes to get this fixed aren't going to dramatically change the calculus of past exposure. Fix it, retest, confirm it's low, and move forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "How do I talk to my family about radon risk without alarming them?", "answer": "Keep it matter-of-fact. \"Our home has elevated radon, which is a health risk over time, so we're getting it fixed. It's a straightforward installation and afterward the levels will be low.\" You don't have to lead with \"this causes lung cancer and 21,000 people die every year.\" The important thing is the action you're taking, not the fear of what could happen if you didn't.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "I tested my home and the reading came back at 4.1 pCi/L. Should I be terrified?", "answer": "No. 4.1 is right at the EPA action level - it means you should fix it, not that something catastrophic has happened. The EPA chose 4.0 as the action level, not because people are dropping dead at 4.1 and fine at 3.9, but because it's a reasonable threshold where the risk-to-cost calculus clearly favors mitigation. Get a quote, get it fixed, retest afterward. This is exactly the kind of situation mitigation was designed for.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "My anxiety is really bad since finding out about radon. What's the best next step?", "answer": "The best next step is taking action, because action is the antidote to the anxiety spiral radon can cause. Get an estimate for mitigation. Understand what the process looks like. Know that once the system is installed, the levels drop quickly - often within 24 hours. The uncertainty is the worst part. Once you have a plan and a date on the calendar, most people's anxiety drops significantly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Risk Communication and Numbers", "question": "My neighbor had mitigation done and now she says she can hear the fan all the time. Does that help or make radon anxiety worse?", "answer": "A quiet fan hum can actually be reassuring once you understand what it means - it means the system is working and pulling radon out from under your home continuously. Most people stop noticing it fairly quickly. It's the same way you stop hearing your refrigerator after a while. If the sound bothers someone, there are quieter fan options available.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "What if radon in my home is 12 pCi/L? Is that a crisis?", "answer": "12 pCi/L is significantly elevated and warrants prompt action - but \"crisis\" implies emergency, and radon doesn't work that way. Your family isn't in acute danger tonight. What it means is you should get mitigation scheduled as quickly as practically possible, not that you need to pack bags. At 12, the fix is the same as at 4 - a mitigation system - it just makes the case for urgency more compelling. Don't wait months, but you have time to do it right.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "My crawl space has radon at 15 pCi/L. Is that worse than a high basement reading?", "answer": "15 pCi/L anywhere in the livable envelope of your home is significantly elevated. Crawl space radon is particularly worth addressing because it can migrate into living areas above. If the crawl space is sealed or the home is built on a crawl space foundation, the mitigation approach may differ from a basement system - a qualified contractor can assess the right approach. Get it evaluated promptly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "I just bought a house and the radon is 7. The inspector said it's normal. Is it?", "answer": "7 pCi/L is not normal by EPA standards - it's well above the 4 pCi/L action level. The inspector may have meant \"it's a number we commonly see\" in your area, not \"it's fine to leave it as is.\" The EPA says fix it at 4 or above. At 7, you should be discussing mitigation with the seller or planning to address it yourself promptly after closing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "We're buying a house and the radon is 3.8. The seller says it's under the limit so we don't need to worry. Are they right?", "answer": "Technically 3.8 is below the EPA action level of 4.0, but the EPA explicitly says that levels between 2 and 4 pCi/L are worth considering mitigation - the risk is real even if it's somewhat lower. \"Under the limit\" is not the same as \"no risk.\" It's a negotiating point at the very least, and in a home you plan to live in for many years, it may well be worth addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "Is radon in a finished basement more dangerous than in an unfinished one?", "answer": "From a health standpoint, if people spend significant time in a finished basement, the exposure is more concerning because they're breathing that air regularly. An unfinished basement that nobody spends time in is a source of radon that can migrate into the rest of the house, but regular occupancy in a finished basement significantly increases your exposure. The radon level matters, and so does how much time you spend in the space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "My home office is in the basement with radon at 5 pCi/L. How worried should I be?", "answer": "Spending 8+ hours a day in a 5 pCi/L space is a meaningful exposure - essentially your entire working day is in the highest-radon zone of your home. That's worth taking seriously and fixing relatively promptly. The cumulative dose you're accumulating by working from that space is higher than someone who just passes through occasionally. I'd prioritize mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "Can I sleep in a basement bedroom with radon at 3.5 pCi/L?", "answer": "3.5 pCi/L is below the EPA action level, though in the range where the EPA says mitigation is worth considering. Sleeping 8 hours a night in that space does mean substantial time in that air. Whether to mitigate at 3.5 is a judgment call, but for a bedroom you occupy every night, I'd lean toward addressing it - the cost is modest compared to the years of cumulative exposure reduction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "I have a man cave in the basement that tested at 4.8. I'm down there maybe 20 hours a week. Is that bad?", "answer": "20 hours a week is nearly a third of your waking hours - that's significant time in a space at 4.8 pCi/L, which is above the EPA action level. The dose you're accumulating from regular recreational use of that space is real. I'd fix it. The mitigation doesn't change how you use the space - you keep enjoying it, just with better air.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "How quickly can radon levels be reduced after a mitigation system is installed?", "answer": "Typically very quickly - often within 24 to 48 hours of system activation, radon levels drop significantly. Most mitigation systems create a lower-pressure zone under the slab or membrane that pulls soil gas out before it enters the home. The change is usually measurable within a day. A post-mitigation test - typically run for 48-72 hours - will confirm the new level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "What if my radon goes back up after mitigation?", "answer": "Sometimes levels creep up if the fan fails, the system loses suction, or there's a construction or foundation change that creates a new pathway for radon entry. That's why it's good to monitor radon periodically even after mitigation - a continuous radon monitor or periodic short-term tests will catch any system degradation. Most mitigation systems run reliably for many years, but the fan is a mechanical part with a finite lifespan.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "My radon was fixed two years ago but I'm getting readings of 2.5 on my monitor. Is the system failing?", "answer": "2.5 pCi/L post-mitigation is actually a good result - it's below the EPA action level and well below the range where the EPA recommends fixing. A mitigation system doesn't always get levels to absolute zero; it reduces them. As long as you're below 4 and preferably below 2, the system is doing its job. If you start seeing numbers climb toward 4 or above on your monitor, then it's worth checking the fan is running and calling your contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "I'm moving into a house where the previous owner had mitigation done. Do I need to do anything?", "answer": "Ask for documentation of the original test result and the post-mitigation test result so you know the system was verified to work. Confirm the fan is still running (you can usually feel suction at the PVC pipe and hear the fan hum). Set up a continuous radon monitor or do a long-term test within your first year in the home to confirm current levels are still low. Mitigation systems can last many years, but it's good to verify.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "Does radon vary room to room in the same house?", "answer": "Radon is generally highest at the lowest level and decreases as you go up. Within the same floor, levels can vary somewhat based on where soil gas is entering, how air circulates, and how far you are from the entry points. Standard testing typically focuses on the lowest livable level, which gives you the worst-case picture. Upper floors typically have significantly lower radon than basements.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "Should I test every room for radon or just the basement?", "answer": "Testing on the lowest livable level - whether that's a basement, a ground-floor slab, or a crawl space area - gives you the most relevant reading because that's where radon concentrates. You don't typically need to test every room. If there's a specific concern about a particular space (like a basement bedroom or home office), testing there gives you the most accurate picture of exposure in that area.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "Can I open windows to reduce radon?", "answer": "Ventilation does dilute radon temporarily, but it's not a reliable long-term solution. Opening windows can lower levels while they're open, but levels return to normal once you close up the house again. Seasonal and daily changes in how you ventilate your home make open-window strategies unreliable for long-term exposure management. Mitigation systems provide continuous, weather-independent radon reduction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "My HRV (heat recovery ventilator) runs constantly. Does that reduce radon?", "answer": "HRVs and ERVs can help dilute indoor radon by exchanging indoor air with outdoor air, and in some cases they meaningfully reduce radon levels. But they're not a promised radon solution and results vary widely depending on the home, the HRV sizing, and the radon source. If you have elevated radon, test the levels with the HRV running - if levels are still above 4, the HRV alone isn't sufficient and you need a dedicated mitigation system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-health-worry-general-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "What's the difference between radon mitigation and radon reduction?", "answer": "They're often used interchangeably. Technically, mitigation refers to the system or process that reduces radon levels - active soil depressurization being the most common method. Reduction describes the outcome - how much the levels come down. When contractors talk about radon mitigation, they mean the active intervention of installing a system to reduce your radon levels.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "Is there anything I can do about radon besides mitigation?", "answer": "The only proven, reliable long-term solution for elevated indoor radon is active mitigation - specifically sub-slab or sub-membrane depressurization. Sealing cracks and gaps can help marginally but rarely solves high-radon situations on its own. Ventilation can dilute radon but isn't a dependable standalone solution. If your levels warrant action, mitigation is the right answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "Does a radon mitigation system use a lot of electricity?", "answer": "No - the fans used in most residential radon mitigation systems are small, low-wattage units that typically run continuously. Most use somewhere in the range of 20-90 watts, which is comparable to a light bulb. The annual electricity cost is usually modest - generally not something that has a noticeable impact on a utility bill.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Specific Scenarios and \"What If\" Questions", "question": "Can a radon fan die and not be noticed?", "answer": "Yes, and that's a real concern. If a fan fails, radon levels can creep back up silently - just as they were before mitigation - and you'd have no way of knowing without a monitor or periodic testing. That's one of the key reasons to have a continuous radon monitor in your home even after mitigation. It serves as a check on system performance over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Specific Living Situations", "question": "I live in an apartment on the 4th floor. Do I need to worry about radon?", "answer": "Radon levels on upper floors are typically very low because radon enters from soil at the lowest levels and disperses as it rises. Fourth-floor apartments are generally not considered high-risk for radon. If you have a specific concern, a short-term test can confirm what's in your air, but it's one of the lower-risk scenarios for radon exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Specific Living Situations", "question": "My house is on a concrete slab. Does that mean radon is less of a concern?", "answer": "Not necessarily. Concrete slabs can have cracks, penetrations, and utility openings that allow radon to enter from soil underneath. Slab-on-grade construction is one of the three main foundation types where radon is found. Even so, slab homes sometimes test lower than basements - but the only way to know is to test. Don't assume a slab foundation means low radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Specific Living Situations", "question": "We have a crawl space foundation. Is radon a bigger concern?", "answer": "Crawl spaces can be significant sources of radon entry. If the crawl space is open or poorly sealed, it acts as a collection zone for soil gas that can migrate into the living space above. Crawl space mitigation typically involves sealing the space with a heavy-duty membrane and installing a depressurization system under the membrane. It's a well-established approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Specific Living Situations", "question": "We're building a new home. Should we put in radon-resistant new construction features?", "answer": "Yes, absolutely. Radon-resistant new construction (RRNC) features - passive sub-slab ventilation piping, sealed vapor barriers in crawl spaces, gas-permeable gravel layers, and electrical outlet placement for future fan installation - are inexpensive to install during construction and far cheaper than retrofitting later. Many states and local codes now require them, but even where they're not required they're worth requesting.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Specific Living Situations", "question": "Does radon go away on its own?", "answer": "Radon continually emanates from uranium-bearing soil and rock - it doesn't stop unless the source is depleted, which happens on geological timescales. In a home setting, radon levels can fluctuate with weather, seasons, and ventilation, but the source doesn't go away. Mitigation doesn't stop radon from forming - it redirects it from entering your home to venting harmlessly outdoors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Specific Living Situations", "question": "Can I DIY radon mitigation?", "answer": "There are DIY mitigation guides available, and in simple situations some homeowners have installed their own systems. However, proper system design depends on accurately diagnosing where radon is entering, what kind of foundation you have, where the pressure field extends under the slab, and how to properly vent to the exterior. A poorly designed system may not be effective. Most people find that professional installation with a post-mitigation test is the more reliable path.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Specific Living Situations", "question": "My contractor said our home's radon pathways are too complex for a standard system. Is that a real thing?", "answer": "Yes, some homes have complex foundations - multiple slabs at different levels, combinations of basement and crawl space, additions with different foundation types - that require more than a single-point system. A qualified radon mitigator should assess the specific pathways and design a system appropriately. \"Complex\" doesn't mean it can't be fixed - it may just require multiple suction points or a combination approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Specific Living Situations", "question": "How often should I retest my home for radon after mitigation?", "answer": "Most professionals recommend retesting every two years and any time you make significant changes to your home's foundation, HVAC, or ventilation. If you have a continuous radon monitor, you're effectively monitoring all the time, which is even better. If you don't have a continuous monitor, a short-term test every couple of years gives you a check on whether the system is still working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Specific Living Situations", "question": "Will my radon level ever go up after mitigation even with the fan running?", "answer": "It can creep up if the suction decreases - due to fan wear, blockage in the suction pipe, changes in pressure dynamics under the slab, or new entry pathways created by construction. That's why periodic monitoring matters. A continuous monitor makes it easy to catch changes before they become significant. If you see levels rising toward 4 on your monitor, call your contractor to inspect the system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Specific Living Situations", "question": "The mitigation company gave me a post-mitigation reading of 0.8 pCi/L. Is that a realistic result?", "answer": "Yes, that's a very good result and entirely achievable. Well-designed mitigation systems routinely get homes to below 1 pCi/L, which is about as low as you can practically achieve in a residential setting. A 0.8 pCi/L post-mitigation reading means your system is working very effectively.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "My mother-in-law is convinced radon can't be real because she's never heard of it. What do I say?", "answer": "The recognition problem is real - radon doesn't have the same cultural visibility as CO or lead paint even though it kills more people. You could point her to the EPA's radon page or even the CDC's statistics. Sometimes it also helps to note that her state's health department has a radon program - state governments wouldn't dedicate resources to it if it weren't a real issue.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "I told my landlord about high radon and they said \"every house has some radon, it's not a big deal.\" Is that right?", "answer": "It's true that virtually every home has some radon - the question is how much. The statement \"it's not a big deal\" depends entirely on the level. Below 2 pCi/L, the risk is low. Above 4 pCi/L, the EPA says take action. Your landlord can't dismiss it with a hand wave. Check your state's laws on landlord radon obligations - many states have them.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "My contractor said radon tests are just a way for inspectors to make extra money. Should I listen to him?", "answer": "No. Radon testing is legitimate public health practice backed by the EPA, the surgeon general, and decades of scientific research. Testing costs are typically modest. The science on radon as a lung cancer cause is rock-solid. Contractors who dismiss radon are either misinformed or motivated by not wanting the extra step in a transaction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "I got two radon tests from different companies and got different results. Who should I believe?", "answer": "Radon levels naturally fluctuate, so two tests at different times or in slightly different locations can genuinely differ. The more important factors are where the tests were placed (same floor, same general area), when they were run (different seasons can produce different readings), and whether both used certified test kits or devices. If the results are dramatically different, a longer-term test averaging over 90 days gives you the most reliable picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "My home inspector said radon is only a problem in certain counties and mine isn't one of them. Is he right?", "answer": "That's not accurate guidance. EPA radon zone maps categorize counties by average predicted radon potential, but they're not reliable predictors of any individual home's radon level. High-radon homes exist in \"low-risk\" counties and low-radon homes exist in \"high-risk\" counties. The only way to know your home's radon level is to test it - county maps are a general planning tool, not a substitute for measurement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "I've seen radon mitigation systems in some houses and wondered what they were. Can you explain?", "answer": "Those PVC pipes you see running up the side of or through a house, usually with a small fan attached somewhere along the run, are radon mitigation systems. They work by creating a low-pressure zone under the slab or foundation that draws radon-bearing soil gas out before it enters the home, routing it through the pipe and exhausting it harmlessly at the roofline. The system runs continuously and doesn't require any action from the homeowner.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "What happens if I just don't fix the radon?", "answer": "Nothing happens immediately. Radon works silently and slowly over years. The consequence of not fixing elevated radon is an elevated probability of developing lung cancer over a lifetime of exposure - not anything that happens in the next week or month. The risk accumulates and the opportunity to stop adding to it passes by. That's the honest answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "Can I just keep all my windows cracked year-round as a radon strategy?", "answer": "In mild climates or seasons, increased ventilation can reduce radon levels measurably. But relying on open windows as your primary radon strategy is unreliable - you can't maintain consistent ventilation year-round in most climates, levels will spike when the house is closed up, and you'll likely be using more energy. It's not a substitute for mitigation. It's fine as a supplemental measure, not a solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "I've tested my home three times and gotten 2.8, 4.2, and 3.1. What do I do with those numbers?", "answer": "That variation is fairly normal for radon, which fluctuates with weather, season, and daily air pressure changes. If multiple tests are clustering around or above 4, the EPA says you should fix it. If they're clustering between 2 and 3.5, you're in the \"worth considering\" range. For the most reliable number, run a 90-day alpha track test in the lowest livable space - that averaging period smooths out the fluctuations.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "Can a radon test give a false high reading?", "answer": "Test kits can be affected by improper placement (too close to exterior walls, windows, or air vents), disturbance during the test period, or closed-house conditions that don't reflect typical living patterns. Short-term tests are inherently more variable. A single high result isn't necessarily wrong, but if it seems surprising, a follow-up longer-term test is a reasonable check. Certified test kits and devices following EPA protocols are designed to minimize false readings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "Can a radon test give a false low reading?", "answer": "Yes - open windows during a short-term test period can artificially dilute radon and give you an inaccurate low reading. That's why closed-house conditions are required for short-term testing. A long-term test over 90 days is less susceptible to this because it averages over normal living conditions including periods when the house is both open and closed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "Is there a reason radon is higher in winter than summer in most homes?", "answer": "Several factors drive higher winter radon in many homes. In winter, homes are sealed - no open windows means less dilution. The \"stack effect\" in a cold climate draws air up through the house and out the top, which creates a negative pressure at the lower levels that pulls more soil gas in through foundation gaps. Frozen ground can also change how gas migrates. Winter readings in many climates are genuinely higher than summer readings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "I tested in July with my windows open. Is that reading reliable?", "answer": "A July test with open windows is likely to underestimate your actual typical radon exposure. Short-term radon tests require closed-house conditions - windows closed, HVAC on normal recirculate - for at least 12 hours before and during the test period. If your test protocol didn't require closed conditions, the reading may be artificially low. Consider retesting under proper closed-house conditions or running a long-term test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "I'm about to list my house. Should I get radon tested before listing or let the buyer test?", "answer": "Testing before you list gives you control. You'll know what result to expect, you have time to fix it before it becomes a negotiating issue, and you can present a mitigated-and-verified home rather than a home with a pending question mark. Buyers who find out about high radon during their inspection phase sometimes panic or walk. Getting ahead of it is almost always the better strategy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "Can a radon test be done in one day?", "answer": "Short-term radon tests require a minimum of 48 hours of exposure time for most devices - EPA protocols generally call for 48 to 96 hours in closed-house conditions. Some professional electronic devices can give a reading in a shorter window, but 48 hours is the minimum for a test to be considered reliable under EPA guidelines. One-day tests are not standard protocol.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "What should I do if I open a radon test kit early by accident?", "answer": "If you've exposed the test kit to outside air before placing it properly, it may compromise the reading. Contact the lab the kit came from - most of them have guidance on this. In many cases, they'll recommend starting with a fresh kit. The integrity of the test depends on the exposure being limited to the specific conditions and timeframe specified in the protocol.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "We just moved into a house we've rented for 20 years. We finally tested and it's 9 pCi/L. We're devastated. What do we do?", "answer": "First: fix the radon now. That's the most important action. Twenty years of 9 pCi/L is a meaningful cumulative exposure, and while that can't be undone, stopping ongoing exposure immediately is the right move. For your health, mention this exposure history to your doctor and ask about lung cancer screening given your specific risk profile. And look into your state's tenant rights - some states have landlord obligations regarding radon that may apply to your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "Can I do a radon test myself or do I have to hire someone?", "answer": "You can absolutely test yourself using a certified short-term or long-term test kit, which you can purchase online or at a hardware store. These kits are mailed to a certified lab for analysis and are reliable when placed and retrieved according to the instructions. Professional testing is also available and sometimes preferred in real estate contexts. For a straightforward homeowner test, a properly conducted DIY kit gives you good information.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "What's the difference between short-term and long-term radon tests?", "answer": "Short-term tests (typically 48 hours to 7 days) give you a snapshot that can be used for quick assessments, especially in real estate situations. They're more variable because radon levels fluctuate. Long-term tests (typically 90 days to one year) give you an average over time that's more representative of your actual ongoing exposure. For the most accurate picture of what you're living with, long-term testing is more informative - but short-term is fine for an initial screen.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "Is the alpha track detector method the most reliable for long-term radon testing?", "answer": "Alpha track detectors are the most common method for long-term residential radon testing and are well-validated for accuracy over 90-day or longer periods. They're passive, don't require power, and give you a reliable time-averaged reading. They're widely used by certified labs and are the standard approach for long-term residential testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "My kids' school has elevated radon. Who is responsible for fixing it?", "answer": "School radon is the responsibility of the school district and building administrator. Many states have requirements for radon testing in schools, and EPA guidance for school radon mitigation exists. If you're a parent concerned about school radon levels, contact your school district's facilities or health and safety department. Public schools in high-radon states are increasingly required to test and remediate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "Is radon in schools a real concern?", "answer": "Yes. The EPA has a specific program for radon in schools because children spend significant amounts of time in school buildings - particularly in classrooms that may be on ground floors or below grade. School radon exposure contributes to children's cumulative lifetime radon dose. The EPA's School Radon Program provides guidance for testing and mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "Should I be worried about radon at work?", "answer": "It depends on where you work. Office buildings on upper floors in well-ventilated commercial spaces generally don't have significant radon concerns. Ground-floor or basement workplaces in areas with elevated soil radon can accumulate meaningful concentrations. If you spend many hours per day in a basement or ground-floor workspace, it's worth knowing what the radon level is - particularly if you're also exposed at home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "If I move out of a high-radon house, does my risk go down?", "answer": "Yes. Your ongoing risk drops when you're no longer being exposed. Radon risk is cumulative - it builds with continued exposure and doesn't keep building once you've left that environment. The past exposure you've accumulated is part of your history, but future exposure from that source stops. Your risk from the past exposure is fixed; your future risk depends on where you're living going forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "I read that radon is only a concern in certain rock types. Should I look up what kind of rock is under my house?", "answer": "Soil and rock type under your home does affect radon potential - granite, phosphate rock, shale, and uranium-bearing soils are more likely to produce high radon. But this is a general guide, not a definitive predictor. Radon levels vary dramatically even within the same geological formation, depending on soil permeability, moisture, and your foundation's characteristics. Testing your actual home is more reliable than studying the geological map.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "Is there a radon season - a time of year when it's worst?", "answer": "In most U.S. climates, radon levels tend to run highest in winter and early spring when homes are sealed and the stack effect is strongest. They tend to run lower in summer when ventilation is higher. This seasonality is why long-term tests that run through multiple seasons give you a better average than a single short-term test. If you test in winter, you may be seeing a near-peak reading; if you test in summer with windows open, you may be seeing a near-low.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "My neighbor had radon at 3, and mine is 8. We have the same builder. Why such a difference?", "answer": "Radon levels can vary dramatically even between nearly identical adjacent homes built by the same builder on the same land. The pathway radon takes from soil into the home depends on small differences in soil permeability, foundation pour consistency, crack and penetration locations, and air pressure dynamics in each specific structure. Your neighbor's 3 and your 8 are both real - radon doesn't distribute evenly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "Can a concrete floor poured on top of old soil somehow reduce radon?", "answer": "Concrete over soil does create a barrier, but radon can still migrate through hairline cracks, utility penetrations, and the concrete-wall junctions. A solid concrete floor helps but doesn't eliminate radon entry the way a properly pressurized sub-slab system does. Sealing alone is rarely sufficient for significantly elevated levels.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "My house has a radon system installed by the builder but I've never tested. Should I?", "answer": "Yes. Passive radon-resistant new construction (RRNC) systems installed during building are helpful but are designed to reduce radon potential, not warranty specific levels. They work by passive airflow without a fan. Without ever testing, you don't know whether the system is sufficient or whether your home needs an active fan added to the existing piping. A test will tell you where you stand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-health-worry-general-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "I rent and my landlord won't test for radon. Can I test it myself?", "answer": "Yes. As a renter, you can purchase a test kit and run it yourself in your unit. Radon tests don't require landlord access or modification to the property. A long-term alpha track test or a short-term kit placed on the lowest level of your unit will give you a reading. If the result is elevated, you have documentation to present to your landlord and potentially to local housing authorities.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "What should I say to a home inspector who says radon isn't a problem in my area?", "answer": "Ask them to show you the actual data supporting that claim. EPA zone maps are probabilities, not warranties, and many inspectors overstate their predictive value. The appropriate professional answer is \"testing is the only way to know for your specific home.\" If an inspector is telling you not to bother testing, that's not guidance that serves your interest as a buyer or homeowner.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-health-worry-general-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "Is there any reason NOT to test for radon?", "answer": "Not really. Testing is inexpensive, non-invasive, and gives you concrete information about a real health risk. The only downside would be finding out your levels are elevated, which is uncomfortable - but it's far better to know than not to know. Not testing because you don't want to deal with the result is the same logic as not going to the doctor because you don't want a diagnosis.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "What's the most important thing to know about radon if you're a homeowner?", "answer": "Test your home. That's the foundation of everything else. Radon is invisible and symptomless - you will not know if you have it unless you test. If your levels are above 4 pCi/L, fix it. The fix is proven, reliable, and permanent. Once it's done and retested, you have genuinely meaningful protection against one of the most preventable causes of cancer death in American homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Real World Worry Scenarios", "question": "If I had to tell someone one thing about radon risk in 30 seconds, what would it be?", "answer": "Radon is a radioactive gas that seeps up from the ground into your home, and it's the leading cause of lung cancer in non-smokers. It has no smell, no taste, and causes no symptoms until it's too late. About 21,000 Americans die from it every year, and most of them never knew their home had a problem. Test your home - it's cheap and easy - and fix it if the levels are elevated. That's it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Family Decision-Making", "question": "My husband refuses to get radon testing done. What can I say?", "answer": "The most direct thing is probably the numbers: radon kills about 21,000 Americans a year, it's the leading cause of lung cancer in non-smokers, and a test costs less than a dinner out. Framing it as something you can take off the list - rather than something to be afraid of - sometimes lands better than leading with the health risk. If he knows that a normal result ends the conversation permanently, that often makes it easier to say yes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Family Decision-Making", "question": "How do I convince my parents to test for radon without making them anxious?", "answer": "Lead with the solution, not the problem. \"Mom, I found out it's easy to test a house for radon - takes 48 hours, you just put a small device in the basement. Let me set one up when I'm over.\" You can let the result be the driver of any next conversation. Most people feel better once they have data, even if the data isn't what they hoped for.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Family Decision-Making", "question": "My teenage son is convinced radon is fake because he read something on Reddit. How do I respond?", "answer": "Radon is one of the better-established environmental health topics in public health - the research started with underground miners in the mid-20th century and has been replicated extensively. The EPA, the CDC, the World Health Organization, and the surgeon general of the United States have all confirmed it's a real lung cancer cause. Tell him the internet has opinions; the public health literature has evidence.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Family Decision-Making", "question": "We just had a baby and I want to make the house safer. Where does radon fall on the priority list?", "answer": "Radon is one of the genuine home health priorities worth addressing when you have a new baby. Infants and young children will spend decades in that house, accumulating lifetime dose from whatever the radon level is. It's not a fire alarm - nobody needs to evacuate - but if you're in a phase of making the home safer, radon testing is a reasonable item to put on the list alongside carbon monoxide detectors and lead testing if the home is older.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Family Decision-Making", "question": "Should I tell my kids about the radon risk, or will it just scare them?", "answer": "Children generally respond well to matter-of-fact explanations, not alarmist ones. \"We found out there was something in the air in the basement that isn't good for lungs over time, so we had it fixed\" is sufficient for younger kids. Teenagers can handle more specifics. The important thing is that it's being addressed - framing the story around \"we found it and fixed it\" rather than \"we discovered a danger\" keeps the tone right.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Family Decision-Making", "question": "My family keeps dismissing radon as something \"only old houses\" have. How do I correct that?", "answer": "New construction is not immune to radon - in fact, tightly built newer homes can sometimes accumulate higher radon levels precisely because they're better sealed. The entry pathway for radon is soil, not old pipes or building materials. Whether a home is 100 years old or 5 years old, it sits on the same ground. The geology under the lot matters far more than the age of the house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Family Decision-Making", "question": "We're starting a family and I want to know all the home hazards I should test for. Where does radon rank?", "answer": "Radon is one of the top priorities alongside carbon monoxide, lead paint (if pre-1978), and water quality (especially if on a well). Of those, radon and CO are the invisible airborne ones that require specific detectors or tests. Radon's unique place on that list is that it causes lung cancer specifically - not the acute danger of CO, but a significant long-term mortality risk. I'd put it high on the list.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon and Family Decision-Making", "question": "My sister says she had her house \"inspected for everything\" but I don't think radon was included. Should I ask her?", "answer": "Yes, worth asking. Radon is not always included in a standard home inspection - it often has to be specifically requested as an add-on. If she doesn't know whether radon was included or not, or if she's never had it tested, it's a quick and inexpensive thing to do. A lot of \"full inspections\" don't automatically cover radon unless it's specifically requested or required by local custom.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk for Renters", "question": "I'm a renter. My landlord says I should \"just crack a window.\" Is that adequate for high radon?", "answer": "No. Opening a window is not a meaningful long-term radon reduction strategy, and it's certainly not something you can rely on year-round in most climates. At elevated levels - particularly above 4 pCi/L - the appropriate response is mitigation. Many states have laws requiring landlords to address significant radon levels. A landlord telling you to crack a window is giving you advice that doesn't match what the EPA recommends.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk for Renters", "question": "I'm in a month-to-month rental with radon at 4.8. Should I just move?", "answer": "Moving is one option, but before deciding, weigh whether the radon issue can be addressed first. Talk to your landlord with the test result in hand. If mitigation can be done quickly, you solve the problem without disrupting your housing. If the landlord refuses and state law supports you, a formal complaint may compel action. If neither works and you have flexibility, yes, reducing your ongoing exposure by moving is a legitimate choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk for Renters", "question": "My mitigation system was installed but my monitor is still reading 2.8. Is that normal?", "answer": "2.8 pCi/L post-mitigation is a good result. The goal of mitigation is to get below the EPA action level of 4 pCi/L, and ideally below 2 - but not every system gets to sub-1.0 depending on the home's geology and construction. 2.8 is a meaningful reduction from an elevated pre-mitigation level. If you want to push lower, your contractor may be able to adjust the system, but from a health standpoint, 2.8 is a significant improvement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk for Renters", "question": "My post-mitigation test showed 1.2 pCi/L. Can I stop monitoring?", "answer": "A reading of 1.2 means your system is working very well. Many people at that level don't continue active monitoring other than visual checks that the fan is running. Even so, a continuous monitor or periodic long-term test every couple of years is still a good practice - fans can fail, and having ongoing awareness of your radon level is easy with modern monitors. It's not required, but it's a good habit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk for Renters", "question": "How long does a radon mitigation fan typically last?", "answer": "Most residential radon mitigation fans are designed to last roughly 5 to 10 years of continuous operation, though many last longer. They're relatively simple devices - essentially a low-wattage continuously running fan. When one fails, replacement is straightforward. Regular visual checks that the fan is running (you can usually feel suction at the indicator tube the contractor installs) help you catch failures before levels creep back up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk for Renters", "question": "Is there a way to tell if my mitigation fan is working without a radon test?", "answer": "Most mitigation systems come with a U-tube manometer - a small water-filled tube that shows whether the fan is creating suction. If the fluid levels are uneven (showing a pressure differential), the system is working. If they're level, the fan may have failed or there's a suction loss. You should also be able to hear the fan hum and feel slight suction at the pipe if you access it. A continuous radon monitor is the most definitive way to confirm the system is keeping levels low.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk for Renters", "question": "Should I get my mitigation system serviced?", "answer": "Mitigation systems are generally low-maintenance - the main moving part is the fan. There's no routine service needed like an HVAC system. The practical maintenance is: periodically confirm the fan is running, check the manometer indicator if one was installed, and do a radon test every year or two to confirm levels remain low. If levels rise, a contractor can diagnose whether it's a fan issue, a new entry point, or a system design issue.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk for Renters", "question": "My post-mitigation reading is 3.5. My contractor says that's within range. Should I push for more?", "answer": "The EPA action level is 4.0, so 3.5 is technically below it - but it's in the \"worth considering further reduction\" zone (2.0 to 4.0). If your pre-mitigation level was, say, 12, a drop to 3.5 is a big improvement. But if you want to push lower - which is always a reasonable goal - ask your contractor whether the system can be optimized: fan speed, additional suction points, or better sealing of entry pathways might get you to 2 or below.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk for Renters", "question": "My radon went from 11 to 1.8 after mitigation. Is 1.8 as low as it can go?", "answer": "Not necessarily, though 1.8 is an excellent result and represents a dramatic reduction. Most systems can achieve 1 pCi/L or below with proper design and installation, but some homes with very active soil or particular geological conditions settle in the 1-2 range even with optimal systems. At 1.8 you're well below the action level - that's a very good outcome.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk for Renters", "question": "Can radon levels change after mitigation if I do renovations?", "answer": "Yes. Renovations that affect the foundation - adding a bathroom in the basement, breaking through the slab for new drains, adding an addition with a different foundation type - can create new radon entry pathways that your existing mitigation system may not be designed to address. It's worth retesting after any significant foundation work to confirm your system is still keeping levels low.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk for Renters", "question": "My house has two separate slab areas (main basement and a garage conversion). Do I need two mitigation systems?", "answer": "Possibly. Sub-slab depressurization works by drawing a pressure field under the slab. If two slab areas are not connected and the pressure field from one suction point doesn't extend to both, you may need additional suction points or a second system. A qualified mitigator can do a diagnostic - typically a smoke test or pressure field extension test - to determine how well one suction point serves both areas.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Understanding Radon Numbers and Context", "question": "Is 4 pCi/L the EPA's safety limit or just a risk threshold?", "answer": "It's a risk threshold - not a \"safe\" level. The EPA chose 4.0 pCi/L as the point where the risk-to-cost calculus clearly favors action. They explicitly state that there's still risk below 4, and that levels between 2 and 4 are worth considering for mitigation. The language they use is \"action level,\" which reflects that 4 is where they say act - not that you're safe at 3.9.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Understanding Radon Numbers and Context", "question": "Why didn't the EPA set the action level lower than 4 pCi/L?", "answer": "The EPA has been debating this internally for years. The original action level was set in the 1980s at a time when mitigation costs were higher and testing was less accessible. Some public health experts argue the threshold should be lowered to 2 pCi/L. The current 4 pCi/L reflects a balance between achievability, cost, and risk communication - not a declaration that 3.9 is without meaningful risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Understanding Radon Numbers and Context", "question": "What does the WHO say about radon levels compared to the EPA?", "answer": "The World Health Organization recommends a reference level of 2.7 pCi/L (100 Bq/m³), which is lower than the EPA's 4.0 pCi/L action level. Some countries follow WHO guidance and have lower national action levels. This is why some experts argue the EPA's threshold should be updated downward. If you're between 2.7 and 4.0, the WHO would say it's worth acting.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Understanding Radon Numbers and Context", "question": "Can I get my home radon level down to zero?", "answer": "Essentially no - radon is present at some level in virtually all outdoor air (around 0.4 pCi/L on average). Indoor levels can be reduced to near outdoor-equivalent levels with a well-functioning mitigation system, often to 0.4 to 1.0 pCi/L. \"Zero\" isn't a realistic or necessary goal - getting well below the EPA action level is the practical target.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Understanding Radon Numbers and Context", "question": "What unit is radon measured in and why?", "answer": "In the United States, residential radon is measured in picocuries per liter (pCi/L). In Europe and internationally, becquerels per cubic meter (Bq/m³) is more common - 1 pCi/L equals about 37 Bq/m³. The units measure the same thing: radioactive decay activity of radon in a given volume of air. If you see a reading in Bq/m³ on an imported device, just divide by 37 to convert to pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Understanding Radon Numbers and Context", "question": "My continuous monitor shows readings in Bq/m³. How does that compare to the EPA's 4 pCi/L limit?", "answer": "The EPA's 4 pCi/L action level converts to approximately 148 Bq/m³. So if your monitor is showing readings above 148 in Bq/m³, you're above the EPA action level. The WHO reference level of 100 Bq/m³ converts to about 2.7 pCi/L. Many European-made monitors default to Bq/m³ - check your device settings to see if you can switch units.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Understanding Radon Numbers and Context", "question": "Is radon in water measured differently than radon in air?", "answer": "Yes. Water radon is measured in picocuries per liter as well, but the concentrations are much higher - water can carry thousands of pCi/L of dissolved radon. When water with high radon is agitated (showering, running taps, washing dishes), it releases radon into the air. The EPA has a guidance level for waterborne radon in public water systems, and private well owners should test separately if they have elevated air radon and use well water.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Understanding Radon Numbers and Context", "question": "How much does radon in water contribute to indoor air radon?", "answer": "The EPA's rule of thumb is that 10,000 pCi/L of radon in water adds about 1 pCi/L to indoor air. So unless your water radon is very high - which is possible with some granitic well water in certain regions - the water contribution to air radon is often modest compared to soil entry. Water radon is still worth testing if you're on a private well and your air radon is elevated without obvious explanation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Understanding Radon Numbers and Context", "question": "My neighbor across the street has very low radon but my house has 7. How is that possible?", "answer": "Radon levels are extremely localized. Small differences in soil composition, moisture content, and permeability can produce dramatically different radon levels on adjacent lots. The specific cracks, gaps, and utility penetrations in your particular foundation determine how much soil gas enters your home. Two houses built by the same builder on lots 50 feet apart can have radon levels that differ by a factor of 5 or more.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Understanding Radon Numbers and Context", "question": "Does the type of basement floor - poured concrete vs. block vs. dirt - affect radon levels?", "answer": "Yes significantly. Dirt-floor basements or crawl spaces are the most permeable to radon entry - soil gas diffuses directly through exposed soil. Poured concrete is more resistant but not impermeable. Block walls have mortar joints and hollow cores that can allow lateral radon migration. Each foundation type requires somewhat different mitigation approaches, but all of them are fixable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Understanding Radon Numbers and Context", "question": "Does landscaping or grading around the house affect radon?", "answer": "Soil grading and landscaping don't typically have a major effect on indoor radon levels, since radon entry is mostly controlled by the pressure differential between the soil and the interior of the home. However, in some cases, adding soil around the foundation or changing drainage patterns can affect how readily soil gas migrates toward the house. These are minor factors compared to foundation construction and ventilation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Is radon linked to any other diseases besides lung cancer?", "answer": "Radon's primary documented health risk is lung cancer. There has been some research interest in radon and other cancers - including leukemia - but the evidence for those links is much weaker and less consistent than for lung cancer. The regulatory and public health framework for radon is built entirely around the lung cancer risk, which is where the solid science is.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Can wearing a mask in a high-radon area protect you?", "answer": "Ordinary face masks, surgical masks, cloth masks, and N95s do not block radon gas. Radon is a gas, not a dust particle. Some particulate respirators may reduce dust and some radon decay particles attached to dust, but that is not the same as filtering radon gas out of the air. The practical protection for a home with elevated radon is lowering the radon level with a radon mitigation system and confirming the result by testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Can an air purifier reduce radon?", "answer": "Standard air purifiers don't reduce radon gas itself. Some HEPA filters may capture a small fraction of radon decay products (the solid particles), but this doesn't meaningfully reduce your radiation dose since the decay happens while the particles are still airborne. Air purifiers can be valuable for other indoor air quality issues, but they're not a radon solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Does smoking weed (cannabis) in a high-radon space increase risk the same way cigarettes do?", "answer": "The combination of any combustion smoke inhalation and radon is concerning for the same synergistic reasons as tobacco smoke. The biological mechanism - that smoking damages lung tissue and impairs clearance of radon decay products - applies to any combustion-based smoke. Even so, the specific epidemiology on cannabis and radon is much less studied than tobacco and radon. The safest assumption is that it's not helpful, and reducing either exposure makes sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Does vaping in a high-radon home increase the risk the same as smoking?", "answer": "The interaction between vaping aerosols and radon is not as well studied as the tobacco-radon relationship. The known radon-smoking synergy involves specific combustion products that damage lung tissue and impair mucociliary clearance. Vaping produces different compounds. Even so, any irritation or damage to lung tissue from any inhaled substance could plausibly affect how the lung handles radon decay products. It's not a studied interaction - but reducing radon exposure is prudent regardless.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Do anti-radon supplements or detox diets exist? Do they work?", "answer": "No. There is no supplement, diet, or detox that reverses or reduces radon-related lung cancer risk. Radon works through radiation, not chemistry - you can't metabolize or flush it out. If you see products marketed for \"radon detox,\" they're not based on science. The only evidence-based intervention is reducing your radon exposure going forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Can radon be blocked by putting plastic sheeting on the basement floor?", "answer": "A single layer of ordinary plastic sheeting is not an effective radon barrier on its own. Thick, reinforced membranes used in professional crawl space encapsulation or sub-membrane depressurization systems can be part of an effective system, but only when combined with active depressurization that maintains a lower pressure beneath the membrane. DIY plastic sheeting won't meaningfully reduce radon in a basement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Is there a vaccine or drug that protects against radon-caused cancer?", "answer": "No. There's no pharmaceutical protection against radiation-induced lung cancer from radon. The only evidence-based protection is reducing the radon concentration in your indoor air. Cancer prevention research continues to advance, but nothing currently on the market or in clinical use specifically protects against radon-induced lung cancer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "How does the body process radon? Does it leave the system quickly?", "answer": "Radon gas itself is an inert noble gas and does leave the body fairly quickly - the residence time in the lungs is brief. The problem is that before it leaves, some of it decays into solid radioactive progeny (decay products) that can stick to lung tissue. Those decay products are what cause the radiation damage. So it's not radon itself that lingers - it's the particles it leaves behind as it decays.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Is there any genetic test that tells me if I'm more susceptible to radon-caused cancer?", "answer": "Genetic testing for cancer susceptibility is an evolving field. There are known genetic variants associated with increased lung cancer risk, and some research is exploring how these interact with environmental exposures like radon. Currently, no standard clinical test specifically addresses radon susceptibility. If you have a strong family history of lung cancer, a genetic counselor or oncologist can discuss what's known about your risk profile.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Is radon-induced lung cancer different from tobacco-induced lung cancer? Does it respond to the same treatments?", "answer": "The cancer cells themselves are not distinguishable by type between radon-caused and tobacco-caused lung cancer - both cause non-small cell lung cancer primarily. The same treatment approaches apply - surgery, radiation, chemotherapy, immunotherapy, targeted therapies depending on staging and molecular markers. The cause doesn't change the treatment protocol; what matters is cell type, staging, and molecular characteristics of the tumor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Does radon exposure increase the risk of other cancers, like kidney or stomach?", "answer": "The scientific evidence for radon causing cancers other than lung cancer is inconclusive. A few studies have suggested possible links to stomach and kidney cancers, but these findings haven't been consistently replicated and the causal mechanism is less clear than for lung cancer, where inhaled decay products directly irradiate lung tissue. Lung cancer remains the only well-established radon-caused cancer risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Is there a radon exposure registry I should be part of if I've had high exposure?", "answer": "There's no standard national registry for residential radon exposure in the U.S. the way there are for certain occupational exposures. What you can do is document your exposure history in your own medical records by discussing it with your doctor. If you're a current or former miner or underground worker, occupational health registries and resources may be more applicable. For residential exposure, your primary care physician's documentation is the practical place to have it recorded.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "More Medical and Science Questions", "question": "Can radon exposure be confirmed with an environmental medical specialist?", "answer": "Environmental medicine specialists can assess your radon exposure history in the context of your overall health and help you think through lung cancer screening options. They can't run a blood test to confirm exposure, but they can take a detailed environmental history and apply it to your medical risk profile. If you've had significant long-term high-radon exposure and want a thorough evaluation, this kind of specialist is worth seeking out.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "We just found out our radon is 6.5. My wife is 8 months pregnant. What do we do right now?", "answer": "The immediate instinct to protect your family is right. At 8 months pregnant, mitigation won't be disruptive to her - the installation usually takes a day and doesn't require leaving the home. Get a contractor in for an assessment promptly. In the meantime, ventilating the basement and the lowest floors with fans or opening windows can provide some temporary dilution while you arrange the permanent fix. The baby isn't going to be harmed by a few weeks in a 6.5 pCi/L home - but getting it fixed before or shortly after birth makes sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "I have stage 1 lung cancer. I never smoked. We just found out our radon is 9. Did radon cause my cancer?", "answer": "Radon is the most common known cause of lung cancer in non-smokers, and a home at 9 pCi/L is well above the EPA action level. I can't tell you with certainty that radon caused your cancer - medicine can't attribute a specific cancer to a specific cause with certainty. What I can say is that it's a very plausible and important piece of your medical history that your oncologist should know about. Tell them your radon level and how long you've lived in the home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "My father was diagnosed with lung cancer and I'm now testing our family homes. My house is 4.3. What should I do?", "answer": "Fix it. At 4.3 pCi/L you're above the EPA action level, and with lung cancer in your immediate family you have additional reason to take respiratory health seriously. There may be a genetic predisposition to lung cancer in your family that interacts with environmental risk factors like radon. Get the radon addressed, mention your family history to your doctor, and ask about any lung cancer screening that might be appropriate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "My house has been at 4 or slightly above on multiple tests. The mitigation guy quoted a price I'm not ready for. What happens if I wait 6 months?", "answer": "The honest answer is that six months at just above 4 pCi/L is a meaningful but not catastrophic additional dose. The risk from radon is about cumulative exposure over years and decades - six months adds a small increment to whatever you've already accumulated. I wouldn't frame it as \"you're fine to wait\" - I'd say the sooner the better - but it's not a medical emergency if a short delay is genuinely necessary for financial or logistical reasons.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "I've been monitoring radon for a year and my annual average is 3.6 pCi/L. The EPA says fix at 4. Should I fix at 3.6?", "answer": "The EPA action level is a policy threshold, not a bright line where risk appears. At 3.6 you're below the formal action level but in the \"worth considering\" zone the EPA explicitly acknowledges between 2 and 4. Given that you've monitored for a year and have a reliable average, the question is whether you want to pay for mitigation to reduce your ongoing exposure further. Given how long mitigation systems run reliably, the math often favors doing it - a one-time cost for permanently lower exposure over decades of living in the home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0236", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "My house had radon at 5 and I mitigated last year. Now it's at 1.5. Has my lung cancer risk returned to normal?", "answer": "Your ongoing risk from this point forward is now very low - about as low as it gets for a residential environment. The past exposure you accumulated before mitigation is part of your history, and it doesn't fully reset. But you've removed the ongoing source of incremental risk. The difference between \"I've been exposed in the past\" and \"I'm continuing to be exposed\" matters, and mitigation made that change.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0237", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "I'm 35 and have lived in a high-radon house since I was 10. Is my risk meaningfully elevated?", "answer": "Twenty-five years of elevated radon exposure starting in childhood does represent a significant cumulative dose. At 35, you're still young enough that the lung cancer risk from that exposure would most likely manifest, if at all, decades from now - but it does contribute to your lifetime risk. The most productive action now: make sure wherever you're living currently has low radon, don't add to the cumulative dose, and maintain awareness of your exposure history with your doctor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0238", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "Is it true that some people are more sensitive to radon than others?", "answer": "Yes, individual variation in susceptibility to radiation-induced cancer is real. Genetic factors affecting DNA repair efficiency, immune function, and cancer suppressor pathways vary between individuals. This is why some people who smoke heavily for decades never get lung cancer while others get it after fewer years. The same principle applies to radon. The risk tables are population averages - individual risk may be higher or lower based on factors we can't always test for.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0239", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "I have a lung removed due to cancer. Does a remaining single lung face higher radon risk?", "answer": "This is a question for your pulmonologist and oncologist, who know your specific surgical history. In general, someone with reduced lung capacity from surgery may have different exposure dynamics, and anyone with a history of lung cancer should take radon exposure very seriously. This is exactly the kind of health situation where your individual medical history, not general population risk tables, should guide the conversation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0240", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "How do researchers know radon causes lung cancer? How did they figure it out?", "answer": "The radon-lung cancer connection was established through decades of epidemiological studies on underground miners - uranium, hard rock, and fluorspar miners - who had extraordinarily high lung cancer rates compared to the general population. The correlation between their measured exposure levels and lung cancer incidence established the dose-response relationship. Later residential studies confirmed that the same mechanism applies at lower concentrations in homes. The science is as solid as environmental epidemiology gets.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0241", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "My doctor had never heard of radon as a medical concern. Is that common?", "answer": "Unfortunately, yes. Radon awareness varies significantly in the medical community. Many primary care physicians don't routinely ask about radon exposure in medical histories the way they ask about smoking. This is beginning to change as lung cancer screening guidelines evolve and radon's contribution to non-smoker lung cancer gets more attention. If your doctor isn't familiar, you can still advocate for yourself by documenting your exposure history and asking about appropriate monitoring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0242", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "Is radon the same as radon gas, radon daughters, and radon progeny? I keep seeing different terms.", "answer": "Radon refers to the radioactive gas itself - specifically radon-222, the most common isotope. Radon daughters or radon progeny are the short-lived radioactive particles produced when radon decays - polonium, bismuth, and lead isotopes. These progeny are the more direct source of radiation damage to lung tissue, since they're solid and can stick to lung cells. When professionals talk about radon risk, they're really talking about the combined exposure to radon gas and its decay products.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0243", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "Can I use a sauna or steam room to somehow sweat out radon exposure?", "answer": "No. Radon doesn't accumulate in your body in a way that can be sweated out. As noted earlier, radon gas is largely exhaled quickly, but the decay products that can stick to lung tissue are already embedded by the time they've caused any damage. There's no detox, cleanse, or heat treatment that addresses radon's effects. The only intervention that matters is reducing what you breathe going forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0244", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "Is radon testing covered by health insurance?", "answer": "Radon testing is an environmental home test, not a medical procedure, so it's not covered by health insurance. It's a home maintenance expense, comparable to testing water quality or getting an energy audit. The test kits themselves are inexpensive. Mitigation is also not covered by standard health insurance - it's a home improvement expense. Homeowners insurance also typically doesn't cover radon remediation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0245", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "Are there any federal assistance programs to help low-income homeowners fix radon?", "answer": "Some states have radon assistance programs that provide discounted testing or mitigation for qualifying low-income homeowners. The EPA's state radon contacts page is the best starting point for finding out what's available in your state. There's no federal program specifically for radon mitigation assistance as of the time I'm writing this, but state-level options vary considerably.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0246", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "I keep reading different numbers for radon deaths - some say 14,000, some say 21,000. Which is right?", "answer": "The EPA's most commonly cited estimate is approximately 21,000 radon-related lung cancer deaths per year in the U.S. Earlier estimates from the 1990s were lower - around 14,000 - based on earlier data and risk models. The current figure reflects updated risk models and exposure data. Different sources may cite different estimates depending on the year and methodology they reference. The 21,000 figure is the current EPA estimate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0247", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "Does radon cause problems faster if you're already immunocompromised?", "answer": "This is a question for your oncologist or immunologist who understands your specific condition. In general, people whose immune systems are compromised - from chemotherapy, autoimmune conditions, or other causes - may have reduced capacity to repair cellular DNA damage, which could theoretically affect cancer risk. Radon exposure is worth minimizing for anyone, and especially so for someone already managing health vulnerabilities.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0248", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "If I fix radon, will my doctor confirm my lung cancer risk has decreased?", "answer": "Your doctor can't give you a precise before-and-after risk number - risk tables are population estimates, not individual risk calculators. What they can acknowledge is that reducing ongoing radon exposure meaningfully lowers your future lung cancer risk contribution from that source. If you're asking for reassurance that the mitigation was worth doing: it was. You've eliminated an ongoing, measurable contributor to your risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0249", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Worry Q&A - More Specific Scenarios", "question": "Is radon in the news a lot? Why haven't I heard more about it?", "answer": "Radon doesn't get the media coverage its death toll warrants. It's invisible, odorless, slow-acting, and the harm happens in homes - there's no dramatic incident, no explosion, no spill to photograph. The cancer takes decades to develop and is impossible to attribute publicly to radon. It lacks the narrative hooks that drive news coverage. That's one of the big reasons so many homeowners have never tested - it's a hazard that flies completely under the radar until someone starts asking about it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0250", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk in Context - Final Questions", "question": "My aunt says radon is only dangerous for miners, not homeowners. Is that true?", "answer": "The radon-lung cancer connection was first discovered in miners because their occupational exposures were dramatically higher - but the same mechanism operates at lower concentrations in homes. The epidemiology has been extended to residential settings through large-scale studies confirming the dose-response relationship holds at typical home levels. The EPA's residential guidelines exist precisely because residential exposure carries real risk, not just occupational exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0251", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk in Context - Final Questions", "question": "Is radon considered a Class A carcinogen?", "answer": "Yes. The EPA classifies radon as a Group A (known human) carcinogen based on the overwhelming epidemiological evidence from miner studies and subsequent residential research. The International Agency for Research on Cancer (IARC) classifies it as a Group 1 carcinogen - the same category as asbestos and tobacco smoke. This is the highest classification for cancer-causing agents.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0252", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk in Context - Final Questions", "question": "Can you get radon poisoning?", "answer": "\"Radon poisoning\" isn't a medical term or recognized acute condition. Radon doesn't cause acute toxic effects - there's no threshold dose of short-term exposure that produces poisoning symptoms. The harm from radon is strictly from long-term cumulative radiation exposure that increases lung cancer risk over years. It's categorically different from chemical poisoning, which causes immediate symptoms.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0253", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk in Context - Final Questions", "question": "Does the CDC have an official position on radon?", "answer": "Yes. The CDC recognizes radon as a significant public health hazard and supports the EPA's guidance on testing and mitigation. The CDC's environmental health programs include radon awareness. Both agencies consistently communicate that radon is the second leading cause of lung cancer in the U.S. and that residential testing and mitigation are important public health tools.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0254", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk in Context - Final Questions", "question": "I read that radon was discovered to be harmful in the 1980s. Is it a new concern?", "answer": "Radon's health hazard was formally recognized in the 20th century, but the underlying science dates back further - uranium miners' high lung cancer rates were documented as early as the 1950s and 1960s. The specific push for residential radon awareness in the U.S. did intensify in the 1980s, partly triggered by a high-profile case of a nuclear plant worker in Pennsylvania whose home tested at extraordinarily high radon levels. That case helped launch the modern residential radon testing movement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0255", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk in Context - Final Questions", "question": "My friend says her home tested at 0.2 pCi/L and she thinks I'm overreacting about my 4.5. How do I respond?", "answer": "Her home being at 0.2 is genuinely excellent - well below the national average. But her home's geology and foundation are different from yours, and radon levels vary significantly property to property. Your 4.5 is above the EPA action level and warrants fixing - that's not an overreaction, it's the appropriate response to a result in that range. You're not panicking; you're following the EPA's guidance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0256", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk in Context - Final Questions", "question": "Is it possible that radon causes more deaths than the EPA estimates?", "answer": "Some public health researchers believe the 21,000 annual deaths estimate may actually be conservative. The estimate is based on risk models derived from miner studies and applied to the residential population - there's inherent uncertainty in extrapolating that way. Some researchers have published higher estimates. The honest answer is that 21,000 is the official EPA estimate, it's based on solid methodology, and the true number could be somewhat higher or lower.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0257", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk in Context - Final Questions", "question": "Why do some doctors not seem concerned about radon when I bring it up?", "answer": "Medical education on environmental health varies, and radon specifically isn't always a focus in medical training. Primary care physicians deal with immediate health concerns and may not prioritize a long-term statistical risk that doesn't have a direct treatment. That's changing slowly as lung cancer screening guidelines evolve and radon's role in non-smoker lung cancer gets more attention. If your doctor isn't engaging with your radon concern, you can still advocate for having your exposure history documented.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0258", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk in Context - Final Questions", "question": "What should I do if I'm really anxious about radon and can't stop thinking about it?", "answer": "Take the actionable steps: test your home if you haven't, schedule mitigation if needed, set up a continuous monitor for ongoing peace of mind. Once those concrete steps are in motion, the anxiety usually diminishes because you're no longer in the uncertainty. If the anxiety persists well beyond what the situation warrants - even after the problem is fixed - that's worth talking through with a mental health professional. Health anxiety is real and treatable, separately from the radon risk itself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0259", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk in Context - Final Questions", "question": "I just learned about radon and I'm overwhelmed by everything I'm reading online. What should I focus on?", "answer": "Two things: test your home if you haven't, and if the result is above 4 pCi/L, get it fixed. Everything else - the statistics, the comparisons, the biology - is context that helps you understand why those two steps matter. Don't let the complexity of the topic paralyze you. Test. Know your number. Take action if needed. That's the whole thing in three steps.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-health-worry-general-0260", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk in Context - Final Questions", "question": "Can radon be a concern in Hawaii or other places with volcanic rock?", "answer": "Hawaii's volcanic geology is different from the uranium-bearing sedimentary and granitic rocks that produce the most radon in continental U.S. homes. Volcanic basalt generally has lower uranium content and therefore lower radon production. Even so, radon can still occur in volcanic terrains, and the only way to know a specific home's level is to test. Low-risk geology is a statistical tendency, not a warranty.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-health-worry-general-0261", "phase": "phase3", "type": "answered_qna", "topic": "workflow-health-worry-general", "category": "workflow-health-worry-general", "subtopic": "Radon Risk in Context - Final Questions", "question": "Is radon worse in homes with basements vs. homes without?", "answer": "Homes with basements tend to have more surface area in direct contact with soil, which can mean more radon entry points. People also spend time in basements, increasing their exposure. Homes on slabs or over crawl spaces can also have elevated radon, but the basement scenario - more soil contact area and more human occupancy at that level - does tend to produce more frequent elevated readings. The only way to know is to test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/health-worry-general.md", "public": true, "tags": [ "workflow-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "What is the Illinois radon testing requirement for real estate?", "answer": "Illinois rules generally call for a radon test to be conducted during the real estate transaction process, and there are licensing requirements for who can legally perform that test. The test must typically be conducted by a licensed radon measurement professional, and the results are disclosed to the buyer. It's one of the more consumer-protective radon laws in the country - Illinois takes this seriously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "What is the minimum test duration for a real estate radon test in Illinois?", "answer": "Illinois generally requires a minimum 48-hour test for real estate transactions. Short-term tests that run less than that typically don't meet the standard for a real estate deal in Illinois. The 48-hour minimum is there to get a reasonably representative reading rather than catching a fluke high or low period.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "What are closed-building conditions in Illinois real estate radon testing?", "answer": "Closed-building conditions mean windows and exterior doors should remain closed except for normal entry and exit, for a set period before and during the test. Illinois rules typically require closed-building conditions to be maintained for 12 hours before the test starts and throughout the entire testing period. This is to prevent outdoor air from artificially diluting or elevating the radon reading - it needs to reflect the actual indoor environment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "What is the post-mitigation testing requirement in Illinois?", "answer": "After a radon mitigation system is installed in Illinois, the system generally needs to be verified with a post-mitigation test to confirm it's working. Illinois rules typically require this test to be conducted by an independent licensed radon measurement professional - meaning someone other than the company that installed the system. The goal is an unbiased result that confirms the levels have actually come down.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Who performs the post-mitigation test in Illinois - the contractor or an independent tester?", "answer": "Illinois rules generally require the post-mitigation test to be performed by an independent licensed radon measurement professional - not the contractor who installed the system. This independence requirement exists so there's no conflict of interest in verifying the system's performance. The mitigator and the tester are supposed to be separate parties.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Does Illinois require post-mitigation testing to be done by an independent tester?", "answer": "Yes, Illinois rules typically call for an independent tester to handle post-mitigation verification. The radon contractor who installed your system cannot also be the one certifying that the system worked - those have to be separate licensed professionals. It's a good rule that protects homeowners from getting a rubber-stamp result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "How long do I have to wait before post-mitigation testing in Illinois?", "answer": "Illinois rules generally require waiting at least 24 hours after the mitigation system is installed before starting a post-mitigation test. This allows the system to begin operating and for conditions in the home to stabilize. Some guidance suggests waiting a bit longer to get a more representative reading, but 24 hours is typically the floor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "What is the maximum wait before post-mitigation testing in Illinois?", "answer": "Illinois rules typically require post-mitigation testing to be completed within 30 days of system installation. You don't want to wait indefinitely - the whole point is to verify the system is working. If you've had a system installed and haven't scheduled that independent follow-up test yet, getting it scheduled promptly is the right move.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Who pays for the post-mitigation test in Illinois?", "answer": "This is typically a negotiated item, but in many Illinois real estate transactions, the responsibility for the post-mitigation test is worked out between the buyer, seller, and mitigation contractor as part of the deal. In some cases the mitigation contractor arranges it; in others the buyer or seller pays separately. There's no universal rule about who writes the check - it depends on what your contract says.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Can the radon contractor who installed the system also do my post-mitigation test in Illinois?", "answer": "No - Illinois rules generally prohibit this. The post-mitigation test is supposed to be conducted by an independent licensed radon measurement professional, not the company that installed the system. This separation is intentional and it's one of the stronger consumer protections in Illinois radon rules. If a contractor offers to do their own post-mitigation test, that's a flag.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Is Illinois a high-radon state?", "answer": "Yes, Illinois is considered a moderate-to-high radon state overall, with significant portions of the state - particularly in the north and central regions - falling in EPA Zone 1 (highest risk). The geology of Illinois, including glacial deposits and soils that allow radon to move easily, contributes to elevated levels in many areas. Testing is genuinely important here, not just a formality.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "What parts of Illinois have the most radon?", "answer": "Northern and central Illinois generally show the highest radon levels based on testing data. Counties like DuPage, Kane, Lake, McHenry, Will, and much of the collar county region around Chicago are in EPA Zone 1 - the highest predicted radon zone. Downstate Illinois tends to have somewhat lower average levels, though elevated homes show up everywhere.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Is radon worse in northern Illinois or southern Illinois?", "answer": "Northern Illinois typically has higher average radon levels than southern Illinois, based on testing data and geology. The glacial soils in northern Illinois tend to allow radon to migrate upward more readily. Even so, radon varies house by house - you'll find high homes in downstate Illinois too, which is why testing matters regardless of where you are.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Is Chicago more likely to have radon problems?", "answer": "Chicago and the surrounding collar counties sit in one of the higher-radon areas of Illinois. The geology of northeastern Illinois - glacial till, sandy soils - is favorable for radon movement. Homes in Chicago proper can have elevated radon, though dense urban construction and building characteristics vary quite a bit. Testing is the only way to know what's actually happening in a specific building.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Is the northern Illinois area around Chicago a high-radon zone?", "answer": "Yes. The Chicago metro area and the collar counties - DuPage, Kane, Lake, McHenry, Will, and Cook - are predominantly in EPA Zone 1, which is the highest predicted average indoor radon level zone. That doesn't mean every home is high, but the statistical risk in this region is real and testing is strongly recommended for any home, especially those with basements.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "I live in DuPage County. Is radon a concern here?", "answer": "DuPage County is in EPA Zone 1, which is the highest predicted radon zone. Testing data from DuPage consistently shows elevated radon levels in a significant portion of homes. If you have a home in DuPage and haven't tested recently, it's worth doing - this isn't a low-risk area.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "I live in Cook County - is radon common in my area?", "answer": "Cook County falls in EPA Zone 1 for radon risk, and testing data supports elevated levels in many homes throughout the county. That includes Chicago itself and the surrounding suburbs. The risk varies by neighborhood and home type, but Cook County is not a place to assume radon isn't a concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "I live in Lake County Illinois. Is radon a big issue?", "answer": "Lake County is in EPA Zone 1 and has some of the higher radon readings in Illinois based on available testing data. The glacial geology in Lake County is particularly conducive to radon migration. If you're in Lake County and haven't tested, you should - and if you have a basement, that's where to start.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "I live in Will County. Is radon common there?", "answer": "Will County is in EPA Zone 1 for radon, and testing data shows elevated levels in a meaningful percentage of homes. The southwestern Chicago suburbs have produced enough high-radon test results over the years that it's taken seriously. Testing is the right call in Will County.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "I live in Kane County. Should I test for radon?", "answer": "Yes, Kane County is in EPA Zone 1, the highest radon risk category. Radon levels in Kane County homes can vary widely street to street, but the overall risk profile here is elevated. Don't skip testing because your neighbor's house tested fine - each home is its own situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "I live in McHenry County. Do I need to worry about radon?", "answer": "McHenry County is in EPA Zone 1 and has radon risk comparable to the rest of the northern Illinois collar counties. The glacial geology up there is particularly favorable for radon to come up through soil and into homes. Testing is genuinely worthwhile in McHenry County.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Does living near the Fox River in Illinois affect radon?", "answer": "Living near the Fox River doesn't directly cause higher radon - radon comes from the soil and bedrock beneath your home, not from surface water. The river valley geography in some areas can influence soil type and drainage, but proximity to the Fox River itself isn't a radon risk factor. The geology of the broader region matters more than the river.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Does living in a river valley in Illinois mean higher radon?", "answer": "River valleys in Illinois don't inherently have higher or lower radon - it really depends on the underlying geology and soil composition. Some valley areas have soils that allow radon to move easily; others don't. The terrain can affect how radon enters a home through pressure dynamics, but the only way to know what's happening in your specific home is to test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "I'm in downstate Illinois. Is radon less of a concern there?", "answer": "On average, downstate Illinois has somewhat lower radon levels than the northern part of the state, but \"lower on average\" doesn't mean low. Elevated radon homes appear throughout downstate Illinois, and without testing you can't know where your home falls. The EPA recommends testing everywhere in the country regardless of regional averages.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "I just bought a house in Rockford, Illinois. Should I test for radon?", "answer": "Rockford is in Winnebago County, which is in EPA Zone 1 - yes, you should test. Northern Illinois in general has elevated radon risk, and Winnebago County has produced plenty of high-radon results over the years. Testing a newly purchased home regardless of location is good practice, and in Rockford it's especially sensible.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "What about Champaign-Urbana? Is radon common there?", "answer": "Champaign and Urbana sit in Champaign County, which is in EPA Zone 2 - a moderate predicted radon level. That's a step down from the northern Illinois collar counties, but it's not a low-risk area. Plenty of homes in Champaign-Urbana have tested elevated. Testing is still the right thing to do.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "I'm in Springfield, Illinois. Is radon a concern?", "answer": "Springfield is in Sangamon County, which is in EPA Zone 2. The risk is moderate compared to northern Illinois, but meaningful enough that testing is worthwhile. Illinois radon data from central Illinois counties shows elevated readings in a real percentage of homes, including in the Springfield area.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "What's the radon situation in Peoria, Illinois?", "answer": "Peoria County sits in EPA Zone 2. Radon levels in the Peoria area are moderate on average, but individual homes can be well above the EPA action level. If you're in Peoria and haven't tested, it's a straightforward thing to do and worth knowing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Is radon a concern in the Quad Cities area of Illinois?", "answer": "The Illinois side of the Quad Cities - Rock Island and Whiteside Counties - are in EPA Zone 2 and Zone 1 respectively. Radon is a genuine concern in that region. Testing is the responsible thing to do for any home in the area, particularly those with basements or crawlspaces.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "What about Naperville? Is radon common there?", "answer": "Naperville sits in DuPage County, which is EPA Zone 1 - one of the highest-risk counties in Illinois. Radon is a real concern in Naperville. It's one of the areas where we consistently see homes come in well above the EPA action level of 4.0 pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Is radon a problem in Aurora, Illinois?", "answer": "Aurora spans Kane and DuPage Counties, both of which are EPA Zone 1. Yes, radon is a genuine concern in Aurora. The collar county geology in that area is among the more favorable in Illinois for radon migration, and testing is strongly recommended.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "I live in Elgin, Illinois. Should I be worried about radon?", "answer": "Elgin is in Kane County, EPA Zone 1. Radon is something to take seriously in Elgin. The area has a history of elevated radon readings, and if your home has a basement or sits on soil with good radon-migration conditions, testing is a sensible step.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "What about Joliet, Illinois? Is radon a problem there?", "answer": "Joliet is in Will County, which is in EPA Zone 1. Radon is definitely a concern in Joliet and the surrounding area. Will County has produced elevated radon readings across a broad range of neighborhoods and home types. Testing is the right move.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Is radon common in Waukegan, Illinois?", "answer": "Waukegan is in Lake County, EPA Zone 1. Radon is a meaningful concern in Waukegan. Lake County has some of the more elevated average radon readings in Illinois. If you haven't tested your home there, it's worth doing - especially if you spend time in the lower levels of the house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "I live in Schaumburg, Illinois. Is radon something I need to think about?", "answer": "Schaumburg is in Cook County, EPA Zone 1. Yes, radon is something to think about there. The northwest suburbs of Chicago - which includes Schaumburg - have plenty of homes that come in above the EPA action level. Testing is straightforward and gives you an actual answer instead of guessing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "What about Bolingbrook, Illinois? High radon risk?", "answer": "Bolingbrook is in Will and DuPage Counties, both EPA Zone 1. That puts it squarely in Illinois's higher-risk radon region. Testing is genuinely worthwhile in Bolingbrook, and if your home has a basement you spend time in, that's exactly the kind of space where radon exposure accumulates.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Is radon common in Palatine or Arlington Heights?", "answer": "Both Palatine and Arlington Heights are in Cook County (EPA Zone 1) near the Lake/Cook county line. Radon is a real concern in both communities. The northwest suburbs have consistently shown elevated radon in testing data, and these are areas where testing before buying or after moving in is a smart practice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "What's the radon risk in Orland Park, Illinois?", "answer": "Orland Park is in Cook County, EPA Zone 1. Radon is a concern there like it is throughout the south and southwest suburbs of Chicago. The Cook County suburban ring has enough radon history that testing should be a standard step for any homeowner.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "Is radon something I should worry about if I live in Plainfield, Illinois?", "answer": "Plainfield is in Will County, EPA Zone 1. Yes - Will County is one of the higher-risk counties in Illinois for radon. Plainfield has seen elevated radon readings in homes across various neighborhoods. Testing is a good idea, full stop.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Testing Requirements", "question": "I live in Lombard, Illinois. Is radon an issue?", "answer": "Lombard is in DuPage County, EPA Zone 1. Radon is a concern in Lombard. DuPage County has a long track record of elevated radon in residential testing, and Lombard is no exception. If you haven't tested, it's easy to do and worth knowing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Rental and Tenant Radon Questions", "question": "Does Illinois require apartment buildings to test for radon?", "answer": "Illinois doesn't have a blanket statewide requirement for multi-family apartment buildings to test for radon in the same way it has structured requirements for single-family home sales. Some municipalities in Illinois have adopted local radon ordinances that go further than state law. If you're in a multi-family building and have radon concerns, checking whether your city or village has local radon rules is worth doing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Rental and Tenant Radon Questions", "question": "I'm moving to Illinois from out of state and renting first. Should I worry about radon?", "answer": "Yes, radon is worth thinking about when renting in Illinois, particularly in the northern collar counties. If you're renting in a first-floor apartment, a garden-level unit, or a home with a basement, radon is more likely to be elevated. Bringing a short-term test kit or a continuous monitor like an Airthings is a reasonable way to get a read on your new place while you settle in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "What is the difference between a radon measurement license and a mitigation license in Illinois?", "answer": "A radon measurement license in Illinois authorizes someone to conduct radon testing. A radon mitigation license authorizes someone to design and install radon reduction systems. These are separate licenses, and not every radon professional holds both. If you're hiring for testing, verify the measurement license; if you're hiring for mitigation, verify the mitigation license.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "Can one company in Illinois do both radon testing and mitigation for the same property?", "answer": "Illinois rules generally prohibit the same company or individual from doing both the testing and the post-mitigation verification for the same property - the independence requirement means the person verifying the system can't be the person who installed it. However, a single company can hold both types of licenses; they just can't be on both sides of the same transaction for verification purposes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "What happens if a radon tester in Illinois is not licensed?", "answer": "If a radon tester operating in Illinois for real estate purposes isn't licensed, their test results generally aren't valid for the transaction. Using an unlicensed tester in a real estate deal can create legal and practical problems - the test may need to be redone with a licensed professional. Beyond real estate, unlicensed testing for your own information isn't illegal, but for anything official you need a licensed tester.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "Does Illinois have continuing education requirements for radon professionals?", "answer": "Yes, Illinois requires licensed radon professionals to maintain their credentials through continuing education. This keeps licensed testers and mitigators current with evolving standards, new technology, and updated protocols. It's part of why the Illinois licensing system is considered one of the more rigorous in the country.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "How long is an Illinois radon professional license valid?", "answer": "Illinois radon professional licenses are typically valid for two years and require renewal. Renewal usually involves continuing education requirements and payment of a renewal fee. If you're checking a professional's credentials, confirm their license is currently active - not just that they were licensed at some point in the past.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "Does my local Illinois county health department do radon testing?", "answer": "Some Illinois county health departments offer radon resources, test kits, or referrals, though this varies by county and funding. Counties like DuPage, Lake, and Cook have more robust programs due to population size. Calling your county health department is a quick way to find out what local resources are available.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "Can an Illinois home sale fall through because of radon?", "answer": "It can, but it's unusual. Radon is a fixable problem - mitigation systems work very well - so most buyers and sellers work out a solution rather than killing the deal. A high radon test result is more often a negotiating point than a deal-breaker. It's worth knowing that going in, whether you're buying or selling.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "I'm buying a house in Illinois and the seller says radon wasn't a problem. Do I still need to test?", "answer": "Yes. Seller representations about radon are only as good as the testing that supports them. If no recent test has been done, or if testing wasn't done by a licensed professional, you should still have an independent test conducted during your inspection period. A house can change, and what was true five years ago may not be true today.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "I'm buying a house in Illinois. When during the process should radon testing happen?", "answer": "Radon testing in Illinois real estate transactions typically happens during the inspection contingency period, which usually runs the first one to two weeks after an accepted offer. The test needs to be conducted by a licensed Illinois radon measurement professional. Plan ahead - you want enough time to get the test scheduled, completed (minimum 48 hours), and results back before your contingency period expires.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "What if the radon test device got moved during my Illinois real estate test?", "answer": "If the test device was moved or the closed-building conditions weren't maintained during the test, the result may be invalid. Illinois rules take test integrity seriously - a compromised test should be flagged by the testing professional and may need to be redone. A good licensed tester will document conditions and note any integrity issues.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "Do I get a copy of the radon test report when buying a house in Illinois?", "answer": "Yes. The test report from a licensed radon measurement professional should be provided to you as part of the real estate transaction. That report should include the device type, test location, duration, test conditions, and the radon level result. Keep a copy for your records - it's useful context for future testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "Can a buyer in Illinois waive the radon test during a home purchase?", "answer": "A buyer can waive the radon inspection contingency, but this is generally not advisable - especially in EPA Zone 1 counties. Waiving testing means taking on the risk that the home has elevated radon without knowing it. In competitive markets buyers sometimes waive inspection contingencies, but giving up the radon test is a risk worth thinking carefully about before agreeing to it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "My real estate agent in Illinois says I don't need to worry about radon. Should I listen?", "answer": "With respect to real estate agents, radon is a technical and health question - not really their area. Illinois is a high-radon state in many areas, and testing is the only way to know what's in a specific home. A good agent will support your right to test; one who actively discourages it is giving you advice outside their expertise. Test anyway.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "The house I'm buying in Illinois already has a radon mitigation system. Do I still need to test?", "answer": "Yes, you should still test - or get the post-mitigation test result from the seller. A system being present doesn't automatically mean it's working correctly. Systems can develop issues over time, suction pipes can get blocked, fans can fail. Confirming the system is actually performing with a current test result is the right move before you move in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Licensing and Professional Standards", "question": "The Illinois home I'm buying has a radon system but I can't find any post-mitigation test results. What should I do?", "answer": "Ask the seller to provide documentation. If they can't, arrange a test during your inspection period to verify the system is working. A system with no verified post-mitigation result is a system with unknown performance - you need actual numbers to know whether it did its job.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Testing Protocols and Technical Questions", "question": "Can I use a do-it-yourself test kit for an Illinois real estate transaction?", "answer": "No. Illinois rules generally require a licensed radon measurement professional to conduct the test for real estate purposes. A DIY kit from the hardware store doesn't satisfy that requirement - it doesn't have the chain of custody, licensed professional involvement, or documentation that an official real estate test needs. DIY kits are fine for your own general knowledge but not for a transaction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Testing Protocols and Technical Questions", "question": "What is a chain of custody in Illinois radon testing?", "answer": "Chain of custody refers to the documented tracking of a radon test device from placement through lab analysis - who placed it, when, where, and who handled it. Licensed Illinois radon measurement professionals are required to maintain chain of custody documentation. It's part of what makes a licensed test result credible and legally valid for real estate purposes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Testing Protocols and Technical Questions", "question": "Can I use an electronic radon monitor like Airthings or RadonEye for an Illinois real estate transaction?", "answer": "Generally, no. Illinois real estate radon tests typically require laboratory-analyzed passive devices or approved professional-grade electronic monitors with proper calibration documentation. Consumer-grade continuous monitors like Airthings or RadonEye are useful for ongoing home monitoring but generally aren't accepted as the official test for real estate in Illinois. Your licensed tester will use approved devices.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Testing Protocols and Technical Questions", "question": "What happens if the seller opens windows during my Illinois radon test?", "answer": "Opening windows or exterior doors during the test period violates closed-building conditions and invalidates the test. If this happens, the test needs to be discarded and redone. If you suspect tampering with closed-building conditions during an Illinois real estate test, bring it up with your real estate agent - it's a serious protocol violation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Testing Protocols and Technical Questions", "question": "What are the consequences of violating closed-building conditions in Illinois?", "answer": "The test result becomes unreliable and should be considered invalid. In an Illinois real estate context, intentionally violating closed-building conditions could also have legal implications - it could be construed as an attempt to manipulate the test result. Licensed testers are trained to document conditions and flag integrity concerns.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Testing Protocols and Technical Questions", "question": "Can a radon test in Illinois be done in winter?", "answer": "Yes, and winter is actually a reasonable time to test because homes tend to be well-sealed, which produces readings more representative of normal winter occupancy conditions. Stack effect - warm air rising and creating suction at the base of the home - can draw more radon in during cold months, so winter tests sometimes run higher than summer tests. Either season can produce a valid real estate test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Testing Protocols and Technical Questions", "question": "Should I test during summer or winter for the most accurate radon reading in Illinois?", "answer": "Both seasons can give you useful information. Winter tends to produce higher readings because of stack effect and closed homes. Summer with closed-building conditions gives you a controlled reading. For a real estate transaction, the test happens when the deal happens. For ongoing personal monitoring, testing in multiple seasons and averaging gives you a fuller picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Testing Protocols and Technical Questions", "question": "How long does it take to get radon test results in Illinois?", "answer": "For a standard short-term charcoal canister test, the device is typically mailed to a lab after the 48-hour (or longer) test period. Lab turnaround is usually a few days to a week. Some labs offer rush processing. Electronic monitors used by licensed professionals can provide faster results. Your tester will give you a timeline estimate when they place the device.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Testing Protocols and Technical Questions", "question": "What is the action level for radon in Illinois?", "answer": "Illinois uses the EPA's action level of 4.0 pCi/L. If your test result comes back at or above 4.0 pCi/L, the EPA recommends fixing the problem. Illinois doesn't set a different number - the state aligns with federal EPA guidance on this.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Testing Protocols and Technical Questions", "question": "Is there any level of radon that is safe in Illinois?", "answer": "No level of radon is completely without risk - it's a radioactive gas and a known carcinogen. The EPA action level of 4.0 pCi/L is a practical threshold for action, not a line between safe and unsafe. The EPA also notes that levels between 2.0 and 4.0 pCi/L are worth considering mitigation. Illinois radon guidance follows this same framework.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Testing Protocols and Technical Questions", "question": "The EPA says 4.0 pCi/L is the action level. Does Illinois agree with that?", "answer": "Yes, Illinois aligns with the EPA on the 4.0 pCi/L action level. There isn't a separate Illinois threshold that differs from the EPA's. Some guidance - from the World Health Organization, for example - suggests even lower action levels, but in practical Illinois terms, 4.0 pCi/L is the standard trigger for recommending mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Post-Mitigation Testing in Illinois", "question": "I just had a radon mitigation system installed in Illinois. When do I get the post-mitigation test?", "answer": "You'll typically wait at least 24 hours after installation before starting the post-mitigation test, and the test itself runs for at least 48 hours. The post-mitigation test must be conducted by an independent licensed radon measurement professional - not the company that installed your system. Plan on the full process taking about a week from installation to having final results in hand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Post-Mitigation Testing in Illinois", "question": "My mitigation contractor wants to do my post-mitigation test themselves in Illinois. Should I let them?", "answer": "No - Illinois rules generally require an independent tester for post-mitigation verification. The company that installed your system shouldn't be the one verifying it worked. If a contractor is pushing to do their own post-mitigation test, that's a red flag. You need a separate licensed measurement professional for that step.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Post-Mitigation Testing in Illinois", "question": "What happens if my post-mitigation test in Illinois still shows high radon?", "answer": "If the post-mitigation test shows levels still above 4.0 pCi/L, the system may need adjustment - additional suction points, a more powerful fan, or addressing other entry points. A good mitigation contractor will come back to evaluate the system and make adjustments. Post-mitigation results above the action level mean the job isn't done yet.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Post-Mitigation Testing in Illinois", "question": "Does Illinois require a specific type of test for post-mitigation verification?", "answer": "Illinois post-mitigation testing generally follows the same protocols as initial testing - a licensed professional using approved devices under closed-building conditions for at least 48 hours. The key difference is the independence requirement. The testing protocol itself is similar to any other real estate or verification test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Post-Mitigation Testing in Illinois", "question": "My Illinois mitigation system was installed six months ago and I never did a post-mitigation test. Is it too late?", "answer": "It's never too late to verify that your system is working, though if you're outside the typical 30-day window, the test is no longer technically a \"post-mitigation\" test in a formal sense - it's a regular follow-up test. You should still do it. Knowing your current radon levels is always worthwhile regardless of when the system was installed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Post-Mitigation Testing in Illinois", "question": "Can I use my Airthings monitor as the post-mitigation test in Illinois?", "answer": "For informal personal peace of mind, your Airthings can give you useful information after mitigation. But for formal verification under Illinois rules - especially in a real estate context - you need a licensed professional using approved devices. Consumer monitors are supplementary tools, not replacements for the formal licensed verification process.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Post-Mitigation Testing in Illinois", "question": "My post-mitigation test in Illinois came back at 1.4 pCi/L. Is that a good result?", "answer": "That's a very good result. The EPA action level is 4.0 pCi/L, and levels below 2.0 pCi/L represent a significant reduction in exposure risk. At 1.4 pCi/L, the system is doing its job well. No level is zero, but 1.4 pCi/L is well within the range of what properly functioning mitigation systems achieve.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Post-Mitigation Testing in Illinois", "question": "What should I do with my post-mitigation test results in Illinois?", "answer": "Keep them in a safe place with your home records. They document that your system was verified to be working at a specific point in time. If you sell the home in the future, buyers will want to see this documentation. It's also a useful baseline for future retesting.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Post-Mitigation Testing in Illinois", "question": "How often should I retest after mitigation in Illinois?", "answer": "The EPA generally recommends retesting every two years after a mitigation system is installed to confirm it's still working properly. System components can wear over time - fans eventually need replacing - and soil conditions can change. Illinois doesn't mandate periodic retesting for private homeowners, but doing it every couple of years is good practice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Geology and Radon Sources", "question": "Why does northern Illinois have more radon than the rest of the state?", "answer": "Northern Illinois was heavily affected by glaciers, which left behind soils - till, sandy sediments, gravel - that are permeable and allow radon gas to migrate upward easily. The glacial geology of the Chicago-area collar counties is particularly favorable for radon movement. Southern Illinois has different geology that generally, on average, produces lower radon levels, though elevated homes appear everywhere.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Geology and Radon Sources", "question": "What kind of soil does Illinois have that contributes to radon?", "answer": "Northern Illinois has glacial till, sandy soils, and loamy sediments that are permeable - meaning radon from uranium decay in the underlying rock and soil can move upward through them into homes. More permeable soil equals more radon pathway to the living space. This is a primary reason why the collar counties around Chicago see elevated radon in a high percentage of homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Geology and Radon Sources", "question": "Does Illinois have uranium-rich bedrock that causes radon?", "answer": "The bedrock in much of Illinois contains naturally occurring uranium and radium, which decay to produce radon. The northern part of the state has geology - including some limestone and shale formations - that contributes to radon generation. This, combined with permeable overlying soils, creates conditions for radon to reach homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Geology and Radon Sources", "question": "Does the granite bedrock near Illinois cause radon?", "answer": "Granite is often cited as a radon source because it can be rich in uranium, but Illinois doesn't sit on the same granite-heavy geology as, say, New England. Illinois radon comes more from glacial soils and sedimentary bedrock. The mechanism is the same - uranium decay - but the geology is different than classic granite radon states.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Geology and Radon Sources", "question": "Does radon come up through the concrete basement floor in Illinois?", "answer": "Yes. Concrete is porous, and radon can pass through it. Cracks in basement floors and walls, floor-wall joints, and penetrations for pipes and wires are all entry points. A properly installed sub-slab depressurization system draws radon from beneath the slab before it can enter, which is why that's the standard mitigation approach in Illinois homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Geology and Radon Sources", "question": "Can radon enter my Illinois home through the water?", "answer": "Radon in well water can contribute to indoor radon levels in Illinois, but the majority of Illinois residents are on municipal water systems that process and aerate water before distribution - which removes most dissolved radon. If you're on a private well in Illinois, it's worth testing both your air and your water for radon. Most Illinois radon problems are soil-based, not water-based.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Geology and Radon Sources", "question": "I'm on well water in rural Illinois. Should I test my water for radon?", "answer": "Yes, if you're on a private well in Illinois it's a good idea to test the water for radon in addition to the air in your home. Aeration during bathing and cooking can off-gas radon from well water into indoor air. Municipal water users generally don't need to worry about this - the treatment process addresses it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Geology and Radon Sources", "question": "Does Illinois have radon in its public water supply?", "answer": "Illinois municipal water systems are required to meet EPA drinking water standards, which include limits on radon in water. Public water systems typically process and aerate water in ways that reduce radon. Radon in Illinois public water is not generally considered a significant indoor radon source - the primary concern is radon from soil.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Home Types and Radon Risk", "question": "Do ranch houses in Illinois have more radon than two-story homes?", "answer": "Ranch houses in Illinois often have higher radon levels because the living space is directly over the basement or slab - there's no upper story between you and the entry point. Two-story homes dilute radon across more air volume. But both types can have elevated radon; the measurement that matters is what's actually in your living space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Home Types and Radon Risk", "question": "Is radon worse in Illinois homes with basements vs. slab foundations?", "answer": "Both can have elevated radon, but the dynamics differ. Basement homes in Illinois typically show more concentrated radon in the basement itself, but it moves upward into living areas. Slab-on-grade homes have radon entering directly into the living space. Both types are mitigatable. Neither is inherently \"worse\" - testing is the only way to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Home Types and Radon Risk", "question": "I have a crawlspace in Illinois. Is radon still a concern?", "answer": "Yes. Crawlspaces are a significant radon entry point in Illinois. Radon rises from the soil, enters the crawlspace, and then moves into the living areas above. Crawlspace mitigation - which often involves a combination of barrier and ventilation approaches - is well understood and effective. If you have a crawlspace in Illinois, testing is important.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Home Types and Radon Risk", "question": "My Illinois home has a finished basement. Does that mean radon isn't getting in?", "answer": "No - a finished basement doesn't block radon. Drywall, carpet, and paneling don't stop radon from coming up through the slab and walls. Many homes with fully finished basements in Illinois have elevated radon levels. Finishing a basement doesn't address the radon problem; mitigation does.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Home Types and Radon Risk", "question": "I have a newer construction home in Illinois built in 2018. Do I still need to worry about radon?", "answer": "Yes. New construction doesn't prevent radon - it's about the soil and geology beneath the home, not the age of the house. Some newer Illinois homes are built with radon-resistant new construction (RRNC) features like a sub-slab gravel layer and a passive pipe, which can reduce radon somewhat. But even those homes should be tested, and the passive systems often need to be converted to active systems if levels are elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Home Types and Radon Risk", "question": "What is radon-resistant new construction in Illinois?", "answer": "Radon-resistant new construction (RRNC) refers to building practices that include features to reduce radon entry - typically a gas-permeable layer under the slab, a plastic sheeting barrier, and a passive PVC pipe routed from beneath the slab to above the roof. Illinois building codes in some areas encourage or require these features in new homes, though it varies by jurisdiction. RRNC reduces radon but doesn't eliminate it - testing is still necessary.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Home Types and Radon Risk", "question": "My Illinois home has a sump pit. Does that affect radon?", "answer": "Yes. Sump pits are open pathways into the soil beneath the home and can be a significant radon entry point. In many Illinois homes, the sump pit is one of the primary spots where radon enters. A well-installed mitigation system will typically seal or address the sump pit as part of the overall depressurization approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Home Types and Radon Risk", "question": "My basement in Illinois has a French drain system. Does that affect radon?", "answer": "French drain systems and interior drainage systems can be radon entry pathways because they maintain an opening to soil air beneath the slab. Some mitigation approaches involve connecting the drainage system to the active depressurization. It's something to discuss with a licensed mitigation contractor who can evaluate your specific setup.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Home Types and Radon Risk", "question": "I live in a townhouse in Illinois. Does radon affect attached homes differently?", "answer": "Radon is unit-specific in townhomes. Adjacent units can have very different radon levels because each unit sits on its own section of foundation and soil, and construction differences between units matter. Testing your specific unit is the only way to know what's happening in your space - don't assume your level matches your neighbor's.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Home Types and Radon Risk", "question": "I live in a high-rise condo in Chicago. Do I need to worry about radon?", "answer": "Radon dilutes significantly in upper floors of high-rise buildings. If you're on the fifth floor or higher in a solid high-rise, radon from the soil is generally not a concern for your unit. Ground-floor and garden-level units in multi-story buildings can still have elevated radon. If you're on a lower floor, testing is more relevant.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Home Types and Radon Risk", "question": "I'm in a garden-level apartment in Chicago. Is radon a concern?", "answer": "Yes. Garden-level apartments - those at or below grade, often with windows at street level or below - are much closer to the soil and can have elevated radon. If you're spending significant time in a garden-level unit in Chicago, it's worth testing. Bring a monitor or get a test kit and see what the numbers look like.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Mitigation in Practice", "question": "How does a radon mitigation system work in an Illinois home?", "answer": "The standard approach in Illinois is sub-slab depressurization - a contractor creates a suction point beneath the concrete slab, connects it to PVC pipe, routes the pipe to the exterior, and installs a fan that continuously draws radon-laden air out from under the home before it can enter the living space. The result is that the pressure beneath the slab becomes negative relative to the indoor space, so radon moves away from the home rather than into it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Mitigation in Practice", "question": "How long does a radon mitigation installation take in Illinois?", "answer": "Most standard sub-slab depressurization installations in an Illinois home take about one day. A licensed contractor will core through the slab, install the suction pipe, route it through the home or along an exterior wall, and mount the fan. The system is operational the same day it's installed, and you can test 24 hours after installation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Mitigation in Practice", "question": "Does a radon mitigation system require electricity in Illinois?", "answer": "Yes. The fan that drives the system is electric and runs continuously. It's a low-power device - similar to a small light bulb in terms of energy use - but it does require a dedicated power connection. Your contractor will handle the electrical connection as part of the installation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Mitigation in Practice", "question": "Can I install my own radon mitigation system in Illinois?", "answer": "For a licensed professional installation that satisfies Illinois requirements - particularly for real estate - you need a licensed Illinois radon mitigation contractor. Homeowners can legally do their own work on their own property in some circumstances, but a DIY installation won't qualify for a formal post-mitigation test under Illinois licensing rules and may not meet the technical standards for effective mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Mitigation in Practice", "question": "How much disruption is there during radon mitigation installation in Illinois?", "answer": "Minimal. The contractor cores a small hole through your basement floor, which creates some dust that's cleaned up. The pipe is routed through a closet or along an interior or exterior wall. Most homeowners can stay in the house during installation, and the work area is accessible again the same day.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Mitigation in Practice", "question": "Will a radon mitigation system reduce the value of my Illinois home?", "answer": "No - in fact, a properly installed and verified radon mitigation system is generally viewed as a positive feature. It documents that the radon problem was identified and professionally addressed. Buyers in high-radon Illinois counties are often reassured by seeing a system in place with documentation that it's working. A house with a system and verified low levels is in better shape than one with an unknown radon history.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Mitigation in Practice", "question": "Do Illinois radon mitigation systems need maintenance?", "answer": "The fan is the main component that requires attention over time. Fan lifespan varies but is often in the 10-15 year range with continuous operation. A visual check of the U-tube manometer (the small gauge on the pipe) periodically tells you the system has suction. If the fan fails or suction drops, radon levels can rebound. Periodic retesting - every two years or so - is the best way to confirm the system is still performing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Mitigation in Practice", "question": "What is the U-tube manometer on my Illinois radon system?", "answer": "It's a small plastic tube shaped like a U, filled with colored liquid, that's attached to your mitigation pipe. When the fan is running and creating suction, the liquid levels in the two sides of the U will be uneven. If they're even, the system isn't generating suction - which means the fan may have failed or there's a problem with the pipe. It's a simple visual indicator you can check anytime.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Mitigation in Practice", "question": "My Illinois radon system has been making noise lately. What does that mean?", "answer": "Fan noise that has changed - new rattling, grinding, or unusual hum - can indicate the fan is starting to fail or that debris has gotten into the system. It's worth having a licensed mitigation contractor take a look and do a diagnostic. Running a radon test at the same time gives you a picture of whether performance has been affected.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Mitigation in Practice", "question": "What happens if the fan on my Illinois radon system fails?", "answer": "If the fan fails, the system stops functioning and radon levels can return to pre-mitigation levels over time. The U-tube manometer will show no differential when the fan is off. Fan replacement is typically straightforward for a licensed contractor. If you notice the manometer showing no suction, get it checked and run a radon test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Health, Exposure, and Radon Risk in Illinois", "question": "Can radon give me a headache or make me tired in Illinois?", "answer": "No. Radon doesn't cause headaches, fatigue, sore throats, or any acute symptoms. Radon's health risk is long-term - it's a radioactive gas that, when inhaled over time, increases the risk of lung cancer through radiation exposure to lung tissue. If you're feeling symptoms like headaches or fatigue, that's a different issue to look into, not radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Health, Exposure, and Radon Risk in Illinois", "question": "How long do I have to live in a radon-affected home in Illinois before health effects become a concern?", "answer": "Radon risk is about cumulative exposure - the combination of concentration and time. Living in a home with elevated radon for years or decades represents meaningful cumulative exposure. Short exposures are less concerning than long-term habitation. This is why testing the home you live in - not just the one you're buying - matters. Radon is the second-leading cause of lung cancer in the U.S. after smoking.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Health, Exposure, and Radon Risk in Illinois", "question": "My Illinois home tested at 8.0 pCi/L. Should I be panicking?", "answer": "You shouldn't panic, but you should act. 8.0 pCi/L is well above the EPA action level of 4.0 pCi/L, and it warrants getting a mitigation system installed. The good news is that mitigation works - properly installed systems routinely reduce levels by 80-99%. The risk was accumulating before you knew, but now you know and can fix it. That's what the testing system is designed for.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Health, Exposure, and Radon Risk in Illinois", "question": "Is radon more dangerous for smokers in Illinois?", "answer": "Yes. Radon and smoking are a particularly dangerous combination. Radon significantly increases lung cancer risk in smokers - the two exposures together are synergistic, not just additive. If you smoke and have elevated radon in your Illinois home, that's a situation to address with real urgency on both the radon side and the smoking side.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Health, Exposure, and Radon Risk in Illinois", "question": "I have kids at home in Illinois and our radon tested at 5.2 pCi/L. How worried should I be?", "answer": "At 5.2 pCi/L you're above the EPA action level, and with children in the home, acting on this is the right call. Children breathe more air relative to their body size and spend a lot of time in the home - cumulative exposure adds up. Get a mitigation system installed and re-verify with a post-mitigation test. This is a problem you can solve completely.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Health, Exposure, and Radon Risk in Illinois", "question": "Does radon affect pets in Illinois?", "answer": "The same biology applies - radon exposure in enclosed spaces with elevated levels represents radiation exposure over time. Pet health from radon isn't as well studied as human health, but the physics of radon decay and lung exposure are the same. If you have elevated radon and pets that spend time in the lower levels of your home, that's another reason to address it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Health, Exposure, and Radon Risk in Illinois", "question": "I just found out my Illinois home has high radon. Is the damage already done?", "answer": "Radon risk is about cumulative exposure over time. If you've been in a high-radon home for years, some exposure has occurred, but you can't change that now. What you can change is future exposure - get the system installed and bring levels down. For concerns about health impacts from past exposure, that's a conversation to have with your doctor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Health, Exposure, and Radon Risk in Illinois", "question": "Should I tell my doctor I have high radon in my Illinois home?", "answer": "It's worth mentioning, especially if you've lived there for a significant time or if levels were very high. Radon is a recognized lung cancer risk factor, and your doctor may factor it into their assessment of your history. Radon doesn't cause symptoms your doctor can observe, but knowing your exposure history is useful context for long-term health monitoring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Health, Exposure, and Radon Risk in Illinois", "question": "Is radon in Illinois just a basement problem, or can I get it on the upper floors?", "answer": "Radon enters from the ground and is typically highest in the lowest levels of the home. But it distributes through the air in the home over time, so upper floors can have elevated radon too - just usually lower than the basement. The official test for real estate is placed in the lowest livable area, but radon isn't strictly \"just a basement problem.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois-Specific Monitoring and Ongoing Testing", "question": "Should I buy a continuous radon monitor for my Illinois home?", "answer": "If you're in northern Illinois - especially the collar counties - a continuous monitor gives you ongoing visibility into your radon levels rather than a one-time snapshot. Monitors like Airthings or Ecosense RadonEye let you see how levels change with season, weather, and changes to your home. For a high-radon region like much of Illinois, that ongoing awareness is genuinely useful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois-Specific Monitoring and Ongoing Testing", "question": "I have an Airthings monitor in my Illinois home. How do I know if the readings are accurate?", "answer": "Airthings monitors are generally considered reasonably reliable for consumer use. For highest confidence, you can run a concurrent short-term professional test alongside your Airthings to compare results. If the two are in the same general range, that's a good sign. For official purposes - real estate transactions, post-mitigation verification - a licensed professional test is still required.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois-Specific Monitoring and Ongoing Testing", "question": "How often should I test for radon in my Illinois home if I don't have a mitigation system?", "answer": "The EPA recommends testing every two years. In Illinois's high-radon counties, testing regularly makes sense because conditions can change - soil settling, new cracks in the foundation, changes in home use patterns. Two years is a reasonable interval; once a year if you want more frequent reassurance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois-Specific Monitoring and Ongoing Testing", "question": "I bought a short-term radon test kit from an Illinois hardware store. Is it reliable?", "answer": "Short-term charcoal canister kits from reputable sources are a reasonable starting point for your own awareness. They won't satisfy Illinois real estate requirements - for that you need a licensed professional - but for personal knowledge they can give you useful directional information. Follow the instructions carefully, including the closed-building conditions requirements.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois-Specific Monitoring and Ongoing Testing", "question": "My Airthings is showing different radon levels every day in my Illinois home. Why?", "answer": "Daily variation in radon levels is normal. Barometric pressure changes, temperature differences between inside and outside (especially relevant in Illinois winters), wind patterns, and ventilation habits all affect how much radon enters the home on a given day. Looking at the rolling weekly or monthly average on your Airthings gives a better picture than any single day's reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois-Specific Monitoring and Ongoing Testing", "question": "Should I put my radon monitor in the basement or the living room in my Illinois home?", "answer": "For the most relevant reading relative to Illinois testing standards, the basement is the more important location - especially the area you spend the most time in. If you have a finished basement where family members spend time, monitoring there tells you the most about exposure. Many monitors let you check multiple areas over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois-Specific Monitoring and Ongoing Testing", "question": "What's a typical radon level for an Illinois home that doesn't have a mitigation system?", "answer": "Illinois averages run higher than many states. Statewide, a meaningful percentage of homes - estimates from testing data often run 30-40% - come in above the EPA action level of 4.0 pCi/L in the collar county region. Average levels in northern Illinois homes without mitigation are often in the 3.0-6.0 pCi/L range. Even so, individual homes vary enormously - testing is the only way to know yours.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois-Specific Monitoring and Ongoing Testing", "question": "After mitigation, what radon level should I expect in my Illinois home?", "answer": "A properly installed and functioning mitigation system in Illinois typically brings levels below 2.0 pCi/L, and often below 1.0 pCi/L. The goal isn't to hit a specific number - it's to get as low as reasonably achievable. Most licensed Illinois mitigation contractors expect to bring you below 2.0 pCi/L at minimum. If your post-mitigation result is still above 4.0 pCi/L, the system needs adjustment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Seasonal and Environmental Radon Questions", "question": "Why does my Illinois radon monitor show higher readings in winter?", "answer": "Several factors converge in an Illinois winter to push radon higher. Homes are sealed up tight against the cold, reducing natural ventilation. The stack effect - warm indoor air rising and creating suction at the foundation - is strongest during cold snaps. Frozen or snow-covered ground can also trap radon in the soil and force it into the home. Winter readings in Illinois homes are often the highest of the year.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Seasonal and Environmental Radon Questions", "question": "My Illinois radon levels spike every time we get a storm. Why?", "answer": "Barometric pressure drops before and during storms, which reduces the atmospheric pressure that partially counteracts radon's tendency to move from high-pressure soil into lower-pressure indoor air. When pressure drops, radon entry increases. It's a well-documented phenomenon - radon monitors in Illinois often show spikes corresponding to storm systems moving through.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Seasonal and Environmental Radon Questions", "question": "I opened my windows in spring and my Illinois radon levels dropped. Does ventilation help?", "answer": "Yes, temporarily. Opening windows increases air exchange and dilutes radon indoors. But this is temporary - close the windows and levels return. Ventilation is not a long-term radon solution for an Illinois home with elevated levels. It doesn't address the source; it just dilutes what's already come in. A mitigation system addresses the source by preventing entry.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Seasonal and Environmental Radon Questions", "question": "Does radon change seasonally in Illinois homes?", "answer": "Yes. Radon in Illinois homes typically peaks in fall and winter when homes are sealed and stack effect is strongest, and tends to be lowest in summer when ventilation is higher. This seasonal variation is why testing in multiple seasons, or using a continuous monitor, gives a more complete picture than a single short-term test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Seasonal and Environmental Radon Questions", "question": "I tested my Illinois home in summer and it came back low. Should I retest in winter?", "answer": "That's a smart instinct. Summer tests with open windows or in milder conditions can underestimate your annual average exposure. Running a long-term test (90 days or more) gives the best picture of your actual year-round average. If you want to check winter specifically, testing between October and March in a sealed house gives a representative look at your worst-case season.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Seasonal and Environmental Radon Questions", "question": "What is the best time of year to test for radon in Illinois?", "answer": "For a real estate transaction, you test when the deal is happening. For personal monitoring, fall and winter tests in Illinois tend to capture higher readings because of closed homes and stack effect - which makes them useful for understanding worst-case exposure. Long-term tests that span multiple seasons give the most accurate picture of average annual exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Seasonal and Environmental Radon Questions", "question": "Does the weather in Illinois affect radon testing accuracy?", "answer": "Weather during the test period can influence radon levels - pressure changes, storms, and temperature swings all have short-term effects. This is part of why closed-building conditions and a minimum 48-hour duration are required for real estate tests - to reduce the impact of short-term weather anomalies. Longer tests average out more weather variation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "My Illinois real estate agent told me to skip the radon test to speed up closing. Should I?", "answer": "That advice prioritizes their timeline over your health and information. Illinois is a high-radon state in many areas, and the radon test exists for a reason. If something comes up after closing - elevated radon you didn't know about - you've lost your negotiating leverage. Don't skip the test to speed up a deal. It takes 48 hours and it's worth knowing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "The Illinois home I'm buying had radon mitigation done by the previous owner. Is that enough?", "answer": "It's a start, but you want to verify the system is still working. Request the documentation: the original test, installation records, and post-mitigation test results. Then do a current test - or at minimum use the post-mitigation result if it's recent - to confirm the system is still performing. Systems can deteriorate over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "In Illinois, can I use a previous radon test result for a current real estate deal?", "answer": "Illinois rules generally require a fresh test for a real estate transaction - an old result, particularly one more than a year old, typically isn't acceptable. The point is to know the current status of the home, and conditions can change. A fresh test conducted by a licensed professional during the current transaction is the standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "What if the radon test device gets placed in the wrong location in my Illinois home during the real estate deal?", "answer": "Placement affects results. Illinois protocols specify where the test device should go - lowest livable area, away from drafts and high humidity. If you have reason to believe the device was placed incorrectly, raise the concern with your real estate agent and the testing professional. A test with questionable placement may need to be redone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "My Illinois real estate deal is moving fast. Can I get rush radon testing done?", "answer": "Some licensed Illinois radon measurement professionals offer faster turnaround - some electronic monitoring devices can provide results within 48 hours without the lab shipping time required for charcoal canisters. Discuss timeline with your testing professional upfront. Even at rush speed, the minimum 48-hour test period is non-negotiable under Illinois rules.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "The buyer in my Illinois home sale is bringing their own radon monitor. Is that okay for the official test?", "answer": "Consumer monitors like Airthings aren't typically accepted as the official test for Illinois real estate transactions. The official test needs to be conducted by a licensed radon measurement professional using approved devices. The buyer's monitor can give them additional information, but it doesn't substitute for the licensed professional test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "My neighbor in Illinois fixed their radon and now their levels are low. Will my house automatically be low too?", "answer": "No. Radon is house-specific. Your home's radon levels depend on the soil directly beneath it, your specific foundation type, the pressure dynamics in your particular structure, and many other factors unique to your home. Your neighbor's result - whether low or high - tells you nothing about what's happening in your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "I've lived in my Illinois home for 20 years and never tested. Is that a problem?", "answer": "It's a significant gap in information. If you've been living in a home with elevated radon for 20 years in Illinois, that's 20 years of cumulative exposure you didn't have visibility into. The right move is to test now - even if you can't undo the past, you can change what happens going forward. And if levels are elevated, a mitigation system can resolve it quickly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "My Illinois house was built on a hill. Does that mean less radon?", "answer": "Terrain influences how pressure dynamics work around a home, but it doesn't reliably predict radon levels. Hilltop homes can have elevated radon; valley homes can have low radon. The soil and geology directly beneath your specific foundation are more predictive than topography. Testing is the only reliable answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "I just bought a house in Illinois and the inspection report doesn't mention radon. Is that normal?", "answer": "Some home inspectors in Illinois include radon testing and some don't - it depends on whether the buyer requested it. If your inspection report doesn't mention radon, it likely wasn't tested, not that it was tested and found to be low. Check with your inspector, and if no test was done, arrange one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "My Illinois home inspector says radon isn't common in my neighborhood. Should I trust that?", "answer": "Home inspectors know construction and systems - radon expertise is a different specialty. A statement that radon \"isn't common in your neighborhood\" isn't backed by testing data on your home. In northern Illinois especially, radon varies dramatically house by house, sometimes on the same street. The inspector's observation isn't a substitute for a test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "Should I test every room in my Illinois house for radon?", "answer": "The standard approach is to test the lowest livable area - typically the basement. This is where radon levels are highest and where the most relevant exposure typically occurs. You can test upper floors too, but the basement reading is the controlling factor. If your basement is unfinished and unused, testing the lowest floor where you spend time is the right approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "I'm building a new home in Illinois. Should I ask the builder about radon-resistant construction?", "answer": "Yes, absolutely. Ask whether they build with radon-resistant new construction (RRNC) features - a sub-slab gravel layer, a plastic vapor barrier, and a passive PVC pipe routed to the roof. Many Illinois builders in high-risk areas include these as standard; some do it only on request. Even with RRNC features, plan to test the home after it's built. Passive systems often need to be activated to be fully effective.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "My Illinois builder says they put in a radon pipe during construction. Does that mean I don't have a radon problem?", "answer": "A passive radon pipe is a start, not a solution. Passive systems reduce radon somewhat but often don't bring levels down enough on their own. You should test the home and, if levels are above 4.0 pCi/L (or in the 2.0-4.0 range and you want to reduce further), a fan can be added to the existing pipe to convert it to an active system. The pipe is an asset; whether it's enough depends on your actual test result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "I have a radon mitigation system in my Illinois home but I'm about to do a basement renovation. Will the renovation affect my radon levels?", "answer": "Basement renovations can disturb the sub-slab conditions and potentially affect mitigation performance. Changes to floor plans, new penetrations, sealing or opening areas - all can interact with the mitigation system. It's worth testing after a major basement renovation to confirm levels are still in check, and talking to your mitigation contractor before the renovation about how to protect the system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "I added a finished bedroom to my Illinois basement. Should I retest for radon?", "answer": "Yes. Adding living space in the basement - especially a bedroom where someone sleeps - increases your household's cumulative radon exposure if levels are elevated. Sleeping in a high-radon space is a significant exposure because you're there for 7-8 hours straight. Retest after the renovation to make sure the basement levels are acceptable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "My Illinois home's radon levels were fine five years ago. Do I need to test again?", "answer": "Five years is long enough that a lot can change - settlement cracks in the foundation, changes in how you use the home, changes to the HVAC system, or just natural variation in soil conditions. The EPA recommends retesting every two years. Five years out from a last test, retesting is the right call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "Is there any way to know my Illinois home has radon without testing?", "answer": "No. Radon is colorless, odorless, and tasteless. There are no symptoms, no smells, no visible signs. The only way to know whether your Illinois home has elevated radon is to test it. This is why the testing infrastructure exists - there's genuinely no substitute.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "My Illinois home's radon level went from 1.8 pCi/L to 4.3 pCi/L between tests. What changed?", "answer": "Several things can cause a meaningful increase between tests: new cracks in the foundation, changes in how the home is used or ventilated, HVAC modifications, basement work that disturbed the soil or slab, or even just the test being done in a different season. An increase from 1.8 to 4.3 pCi/L is significant and worth investigating. If you have a mitigation system, have it checked. If you don't, now is the time to get one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "My Illinois home tested at 2.6 pCi/L. Should I get a mitigation system?", "answer": "At 2.6 pCi/L you're below the EPA action level of 4.0, but the EPA explicitly notes that levels between 2.0 and 4.0 pCi/L are worth considering mitigation - the risk is real, just lower. Whether to mitigate at 2.6 pCi/L is a personal decision. Some people choose to address it; others decide to monitor and act if levels rise. If you want to talk through what that level means for your specific situation, give us a call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "What's the lowest radon level that Illinois mitigation can realistically achieve?", "answer": "A well-designed mitigation system in Illinois can typically achieve levels below 1.0 pCi/L in most homes, and sometimes significantly lower. The practical floor is close to outdoor air radon levels, which average around 0.4 pCi/L nationwide. Getting below 2.0 pCi/L is the common goal; getting below 1.0 pCi/L is achievable in many homes with good sub-slab conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "After mitigation, my Illinois home tested at 0.8 pCi/L. Is that as good as it gets?", "answer": "0.8 pCi/L is an excellent result. That's below typical outdoor average levels, which is about as good as you can achieve. The mitigation system is performing very well. Keep the system running, check the manometer periodically, and retest every couple of years to confirm it's maintaining that performance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "I'm trying to decide between two Illinois homes and one has a radon system. Is that a tie-breaker?", "answer": "A home with a professionally installed and verified mitigation system has a known radon history - someone identified the problem and resolved it. That transparency is actually a positive attribute. A home without any radon testing history is an unknown. If all else is equal, the documented-and-resolved option is preferable to the unknown. But don't let radon alone drive the decision - test the other home too.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Real Estate Agent and Transaction Logistics", "question": "Is American Radon Systems a good resource for Illinois homeowners with radon questions?", "answer": "We work in the Chicagoland area and have years of experience with the radon situations Illinois homeowners face - the collar county geology, the real estate transaction requirements, the post-mitigation testing process. If you have a question about your specific situation - whether it's a test result you're trying to interpret or a system you need installed - call or text Bill and we can talk through what the numbers mean for you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and Adjacent Property Questions", "question": "My Illinois neighbor is doing construction next door. Could that affect my radon levels?", "answer": "Construction next door can disturb soil and temporarily change pressure dynamics in the ground around your home. Some homeowners do see temporary radon spikes during neighboring excavation or foundation work. Running a monitor during the construction period is a reasonable way to watch for changes. Once the work is done and the ground settles, any disruption typically resolves.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and Adjacent Property Questions", "question": "I have a shared wall with my neighbor in a duplex in Illinois. Can radon travel between units?", "answer": "Radon is unit-specific - it comes from the soil beneath each unit's foundation. Shared walls don't typically allow radon to pass from one unit to another in meaningful quantities. Each unit in a duplex should be tested independently. Your neighbor's result doesn't predict yours.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and Adjacent Property Questions", "question": "I'm an Illinois real estate investor with multiple properties. Should I be testing all of them?", "answer": "If your properties are in northern Illinois collar counties or other high-radon areas, testing each one is worthwhile. Elevated radon is a material condition that affects habitability, rental value, and future sale negotiations. Knowing the radon status of each property in your portfolio - and having documentation - is a reasonable part of property management in a high-radon state.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and Adjacent Property Questions", "question": "Can radon come into my Illinois home through the HVAC system?", "answer": "HVAC systems don't create radon, but they can distribute it through the home and affect indoor pressure dynamics in ways that influence radon entry. A return air duct in the basement can draw radon from that space and circulate it through the home. Some mitigation strategies account for HVAC interaction. A licensed mitigation contractor can evaluate how your system is affecting radon distribution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and Adjacent Property Questions", "question": "My Illinois home has a fireplace. Does that affect radon?", "answer": "Fireplaces can create negative pressure inside a home - drawing outside air in to feed combustion - which can also pull more soil gas including radon into the space. Homes with frequently used fireplaces and tight insulation can see elevated radon during operation. It's another factor in a home's overall pressure dynamics, which a mitigation system addresses by creating controlled sub-slab depressurization.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and Adjacent Property Questions", "question": "Does air sealing my Illinois home for energy efficiency affect radon?", "answer": "Yes, it can. Tightening a home's envelope reduces natural air exchange, which means radon that enters accumulates to higher concentrations instead of being diluted by outdoor air. It's a common pattern - homeowners insulate and seal for energy efficiency and then discover their radon levels have risen. If you're doing energy efficiency improvements in an Illinois home, add a radon test to the follow-up checklist.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and Adjacent Property Questions", "question": "My Illinois home is getting new windows and doors. Should I retest radon afterward?", "answer": "New windows and doors improve the air seal on your home, which can raise indoor radon levels by reducing ventilation. It's a sensible follow-up test after significant weatherization work. The change in radon levels from window replacement alone is usually modest, but combined with other sealing, it can add up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and Adjacent Property Questions", "question": "I just had spray foam insulation installed in my Illinois basement. Should I retest for radon?", "answer": "Yes. Spray foam insulation significantly improves air sealing and can meaningfully raise indoor radon levels by reducing the natural air exchange that was previously diluting radon. This is a well-documented effect. Retesting after spray foam installation in an Illinois basement is the right thing to do - especially if you're in a high-radon county.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and Adjacent Property Questions", "question": "I live in an Illinois mobile home. Is radon a concern?", "answer": "Mobile and manufactured homes can have elevated radon, though the dynamics differ from site-built homes. A mobile home on a full foundation behaves more like a conventional house. One on a pier-and-beam system with an open crawlspace may ventilate more naturally but can still have elevated radon depending on the soil below and the floor construction. Testing is the right approach regardless of home type.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "Does Illinois have any radon requirements for commercial buildings?", "answer": "Illinois radon licensing and testing rules are primarily structured around residential real estate, but commercial buildings - especially those with occupied below-grade spaces - can have radon issues too. There isn't a blanket statewide mandatory testing requirement for all commercial buildings, but employers in Illinois have general duty obligations around workplace health. Building owners and tenants in high-radon counties should be aware of the issue.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "Does Illinois require radon testing before putting a house on the market?", "answer": "Illinois doesn't typically require sellers to test before listing - the testing requirement is more commonly triggered during the transaction, often by the buyer during the inspection period. However, many Illinois sellers proactively test before listing because it allows them to address issues before buyers do and avoids surprises during negotiations. It's not legally mandated pre-listing but is practically useful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "What documentation should I have for the radon mitigation system in my Illinois home?", "answer": "You should keep the original radon test report (pre-mitigation), the mitigation system installation documentation from the contractor, and the post-mitigation test result from the independent licensed tester. If you've done subsequent retests, keep those too. This file of documentation is what you'll need to present to buyers if you sell, and it's your record that the system was properly installed and verified.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "I lost the paperwork for my Illinois home's radon mitigation system. How do I replace it?", "answer": "Start by contacting the mitigation company that did the installation - they may have records. The independent tester who did the post-mitigation test will also have their results on file. If the mitigation was done as part of a real estate transaction, the real estate records or the title company may have copies. In a pinch, a current test run by a licensed professional can establish the present-day status, even without historical records.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "My Illinois home's radon mitigation was done years ago and I have no records. What should I do before selling?", "answer": "Run a current test with a licensed Illinois radon measurement professional. If levels are below the action level, that becomes your current documentation. If levels are elevated, the system may need maintenance or adjustment. Either way, having a current licensed test result is what matters to buyers - the historical installation records are useful but a current verified result is what closes the information gap.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "I'm buying my first home in Illinois and I have no idea what radon is. Do I need to worry?", "answer": "Radon is a naturally occurring radioactive gas that comes up from the soil and can accumulate in homes. You can't smell, see, or taste it. In Illinois - especially in the Chicago-area collar counties - it's a genuine concern because of the local geology. It's absolutely something first-time buyers should address during the home inspection process. The test is simple, inexpensive, and gives you important information before you commit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "I work from home in my Illinois basement all day. Does that change how I should think about radon?", "answer": "Yes, significantly. Working from home in a basement in Illinois means spending potentially 8+ hours per day in the space most likely to have elevated radon. That's substantially more exposure than someone who only passes through the basement occasionally. If you have a home office in an Illinois basement, testing is especially important and addressing elevated levels is a higher priority.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "My elderly parent lives in a lower level of an Illinois home. Is radon something to be particularly aware of?", "answer": "Yes. Older adults who spend most of their time at home - including significant hours in lower levels - accumulate more cumulative radon exposure than someone away at work all day. The health concern is the same (long-term lung cancer risk from cumulative exposure), but the time-at-home factor makes awareness more important. Testing and, if needed, mitigation is a practical way to protect someone who spends a lot of time in the home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "I'm pregnant and I just found out my Illinois home has high radon. Should I be worried?", "answer": "Radon is a long-term lung cancer risk from cumulative radiation exposure - it doesn't cause acute birth defects or pregnancy complications the way some chemical exposures might. Even so, this is a health question for your OB or midwife. What you can do right now is get the mitigation process started so radon levels are reduced as quickly as possible. Increasing ventilation temporarily (opening windows when weather allows) can modestly reduce levels while you wait for mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "My Illinois home has a radon test result of 12 pCi/L. Is that very high?", "answer": "12 pCi/L is significantly elevated - three times the EPA action level. This is a home that needs a mitigation system promptly. The good news is that at 12 pCi/L, a well-installed mitigation system will produce a dramatic, visible improvement - systems routinely bring levels like this down below 2.0 pCi/L or lower. It's a fixable problem, and fixing it matters. If you want to talk through next steps, give us a call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "My Illinois basement slab is old and cracked. Does that mean more radon?", "answer": "Cracks in older slabs create more direct pathways for radon to enter from the soil beneath. An older, cracked slab isn't automatically a warranty of high radon - it depends on the soil conditions - but it is a risk factor. Mitigation through sub-slab depressurization works effectively on older slabs; the cracks don't prevent the system from working, and in some cases they make the sub-slab easier to depressurize.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-illinois-specific-testing-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "My Illinois home is a passive solar design with lots of concrete thermal mass. Does that affect radon?", "answer": "Passive solar homes in Illinois often have significant concrete slab construction and may be designed for very low air exchange, which can contribute to radon accumulation. The thermal mass itself doesn't generate radon, but the tight building envelope and slab construction are factors. Testing is especially important in a tight, energy-efficient home - the same features that make it efficient can concentrate indoor pollutants including radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "Does an attached garage in my Illinois home contribute to radon?", "answer": "An attached garage can be a radon entry point if it has a slab-on-grade floor and shares connections with the living space. Radon that enters the garage can migrate into the house through shared walls, doors, or HVAC connections. Illinois homes with attached garages where the garage connects to the basement or lower level should include the garage in their radon awareness. It's one more entry pathway to account for.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "I have a finished walk-out basement in my Illinois home. Does the walk-out design reduce radon?", "answer": "Walk-out basements have at least one wall fully above grade with exterior exposure, which can help with ventilation - but it doesn't eliminate radon risk. The slab and the below-grade walls are still in contact with soil, and radon still enters through those surfaces. Walk-out basements in Illinois high-radon counties have elevated radon plenty often. Testing is still necessary.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "My Illinois home's radon level is different on the first floor vs. the basement. Which one matters?", "answer": "Both matter, but for different reasons. The basement level is where radon enters and is typically highest - this is the controlling reading for whether you need mitigation. The first-floor level tells you how much radon is reaching your primary living space. For official testing purposes, the lowest livable area is the standard test location. For your own awareness, knowing both levels gives you a fuller picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "Does radon mitigation make my Illinois home smell different?", "answer": "No. Radon is odorless, and the mitigation system removes it from beneath the slab before it enters the home. The system itself - a fan, pipe, and discharge point - doesn't introduce any odors. In fact, some homeowners notice a slight reduction in musty basement smells because the same depressurization that removes radon also removes other soil gases. But you won't smell the radon going away.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "How do I explain radon to a skeptical family member in Illinois who thinks it's not a real risk?", "answer": "The best framing is this: radon is the second-leading cause of lung cancer in the United States, behind smoking - that's not a small thing. It comes up through the soil into homes all across Illinois, particularly in the northern counties. It's colorless, odorless, and you can't detect it without testing. The EPA recommends fixing any home above 4.0 pCi/L, and in Illinois a significant percentage of untested homes are above that level. Testing takes 48 hours and costs very little. The risk is real, the fix works, and the test tells you where you stand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon and School, Commercial, and Public Building Questions", "question": "My Illinois in-laws think radon is just a scam to sell mitigation systems. How do I respond?", "answer": "Radon is classified as a Group 1 human carcinogen by the International Agency for Research on Cancer. The EPA, the Surgeon General, and the World Health Organization all recognize it as a serious health concern. The science behind radon - uranium decay, radon-222, alpha particle radiation in lung tissue - is well-established physics and biology. Testing and mitigation is a legitimate public health intervention, not a sales scheme. The proof is in the post-mitigation test - an independent tester verifies the system actually works.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Odds and Ends", "question": "My Illinois house tested at 4.1 pCi/L - just barely over. Does that still warrant mitigation?", "answer": "Yes. The EPA action level of 4.0 pCi/L is the recommended threshold for action, and 4.1 pCi/L is above it. \"Just barely over\" still means you're above the guideline. Mitigation at this level will work, and the result will likely come down to well below 2.0 pCi/L. The EPA guideline isn't a cliff edge - it's a practical marker for when action makes sense, and 4.1 pCi/L clears that marker.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Odds and Ends", "question": "I live in Illinois and I've been hearing about the WHO radon guideline of 2.7 pCi/L. Should I use that instead of the EPA's 4.0?", "answer": "The World Health Organization does recommend a reference level of 100 Bq/m³ (approximately 2.7 pCi/L), which is lower than the EPA's 4.0 pCi/L action level. In practice, Illinois uses the EPA standard. If you want to be conservative and follow the WHO guidance, that's a reasonable personal decision - mitigation at 2.7 pCi/L is perfectly feasible. The point is that no level is risk-free; the thresholds are just practical guides for action.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Odds and Ends", "question": "My Illinois home is in a historic district. Does that affect how radon mitigation gets done?", "answer": "Historic designation can impose restrictions on exterior modifications - including where mitigation pipes and fans are routed and how visible they are from the street. A licensed mitigation contractor with experience in older homes can design a system that meets performance standards while working within the aesthetic requirements of your historic district. It requires some creativity but is routinely done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Odds and Ends", "question": "I bought a new construction home in Illinois and the builder gave me a passive radon system. What should I do first?", "answer": "Test the home after you've been living in it for a few months with normal occupancy patterns. If the passive system is keeping levels below 2.0 pCi/L, it may be sufficient. If levels are above 4.0 pCi/L - or in the 2.0-4.0 range and you want to reduce further - a fan can be added to the existing pipe to convert it to an active system. The pipe the builder installed is the foundation; whether a fan is needed depends on your test result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Odds and Ends", "question": "Does Illinois track radon-related cancer data?", "answer": "The Illinois Department of Public Health tracks cancer incidence data including lung cancer rates, and radon is recognized as a contributing factor in lung cancer statistics statewide. The correlation between high-radon counties and lung cancer rates in Illinois has been studied. This data is one of the reasons Illinois invested in its state radon program - the public health impact is real and documented.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-illinois-specific-testing-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-illinois-specific-testing", "category": "workflow-illinois-specific-testing", "subtopic": "Illinois Radon Odds and Ends", "question": "Is there a specific time of day that's best for radon testing in Illinois?", "answer": "Radon levels fluctuate throughout the day - they tend to be higher at night and in the early morning when homes are closed and ventilation is lower. However, for real estate and formal testing purposes, the test runs for at least 48 hours to average out these daily fluctuations. There's no specific start time that's required. For personal continuous monitors, looking at rolling averages rather than any single hour gives a more useful picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "workflow-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My baby's bedroom is in the basement and I just tested radon. It came back at 5.2 pCi/L. What do I do?", "answer": "That number is above the EPA action level of 4.0 pCi/L, which means mitigation is the right call. The good news is radon risk is cumulative - it builds up over years of exposure, not days - so you're not in a crisis this moment. But I would move the nursery upstairs while you get mitigation scheduled, not because panic is warranted, but because it's the sensible thing to do when a better option exists. Get a mitigation system installed and then retest to confirm the level came down before you move the crib back.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "We just built a nursery in the basement. Now we found out radon is 5.0 pCi/L. Should we panic?", "answer": "Panicking won't help, but taking action will. At 5.0 pCi/L you're above the EPA's recommended action level, so this is worth fixing promptly. The risk from radon is long-term - it's about cumulative radiation exposure to the lungs over many years, not an immediate danger from a few weeks in a basement room. I'd get the nursery moved upstairs in the meantime and get a mitigation system scheduled. Once the system is in and you retest and confirm levels are down, you'll have real peace of mind instead of just hope.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My baby sleeps in the basement and the radon test was 3.8 pCi/L. Is that okay?", "answer": "At 3.8 pCi/L you're just under the EPA's 4.0 pCi/L action level, but the EPA is clear that levels between 2.0 and 4.0 are still worth serious consideration - the risk is lower but not zero. For an infant who spends a lot of time in that room, I'd lean toward mitigation. The cost of a system is modest compared to years of daily exposure in a sleeping space. Confirm the reading with a longer-term test if you want more data, but I wouldn't feel comfortable leaving a baby in a basement room at 3.8 without at least thinking through mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My daughter's nursery is in the basement. Radon tested at 4.0 pCi/L exactly. Do we have to do something?", "answer": "The EPA's guidance is to take action at 4.0 pCi/L or higher, so you're right at that line. Technically that qualifies for the action threshold. More practically, you have a baby sleeping in that room every night, which means high cumulative hours of exposure in a concentrated space. I'd get the mitigation system installed. You don't need to move her tonight but I'd get the work scheduled this week rather than sitting on it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "We put the baby in the basement because it stays cooler down there in summer. Just tested and it's 6.1 pCi/L. I feel terrible.", "answer": "Don't beat yourself up - most people have no idea what their radon level is until they test, and testing is the right thing to do. At 6.1 pCi/L you're significantly above the action level and mitigation is absolutely the right next step. Move the baby to an upper floor while you get that scheduled. Radon risk is cumulative over years, so the weeks or months since you set up the nursery are not a catastrophe - but now that you know, act on it. Get a mitigation system installed and retest. That's how you actually fix this.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My wife and I just set up a basement nursery and our neighbor mentioned we should test for radon first. We haven't tested yet. How worried should I be?", "answer": "Your neighbor gave you solid advice. Radon levels vary a lot from house to house - even neighbors can have very different readings - so you need an actual test before you can know anything. Pick up a test kit (short-term or long-term), or have someone come test the space. Don't assume you're fine or assume the worst. The only way to know is to test. Get that number first, and then you'll know exactly what you're dealing with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My baby's crib is right against the basement wall where the radon is coming in. Does being close to the wall make it worse?", "answer": "Radon seeps in through cracks and gaps in the foundation, and the gas does tend to be more concentrated near those entry points before it mixes with the room air. In practice, though, the bigger issue is that basements in general tend to have higher radon levels than upper floors because the gas comes up from the soil and doesn't dilute as quickly down there. Moving the crib away from foundation walls is a reasonable precaution, but the more meaningful fix is mitigation - that addresses where the gas is coming from, not just where the crib sits.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "We're converting our basement into a nursery. Someone said to test for radon before we start. Is that really necessary?", "answer": "Yes, absolutely test before you finalize those plans. Radon levels are variable and you won't know where you stand until you run a test. If the level comes back above 4.0 pCi/L, you'll want to include mitigation in the renovation rather than finishing the space and then retrofitting later - it's usually cleaner and less disruptive to plan it in from the start. If the level is low, great, you know that going in. Either way, test first.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My husband thinks moving the baby out of the basement is overreacting. The radon is 4.6 pCi/L. Am I being unreasonable?", "answer": "No, you're being reasonable. At 4.6 pCi/L you're above the EPA action level, and a basement bedroom where a baby sleeps twelve or more hours a day is a high-exposure environment by definition. The risk is cumulative and long-term, not immediate - but \"cumulative\" is exactly why the sleeping space matters. Moving the baby upstairs while mitigation is installed isn't panic, it's just sensible. Your instinct here is the right one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "What's the safest radon level for a baby's bedroom?", "answer": "The EPA doesn't define a \"safe\" level because no level of radon is without some risk - what they define is an action threshold of 4.0 pCi/L where you should mitigate, and a consideration range from 2.0 to 4.0 where it's worth thinking about it. For a baby's bedroom specifically, I'd push that consideration range seriously. Kids spend a lot of hours in their rooms and will be living in that house for years. Lower is always better. If you can get the level below 2.0 pCi/L with a mitigation system, that's the target.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "Is a basement nursery ever a good idea if radon is an issue in our area?", "answer": "It can be, as long as you test and mitigate if needed. Radon is very fixable - a properly installed sub-slab depressurization system can reduce levels dramatically in most homes. So \"basement nursery\" and \"radon concern\" aren't mutually exclusive. You test, you mitigate if the level warrants it, you retest to confirm the reduction, and then you know your baby is in a space where the air has been addressed. What you don't want to do is skip the testing step and assume it's fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My landlord says the basement nursery is fine but I'm worried about radon. Can I test myself?", "answer": "Yes. You can buy a test kit - many are available at hardware stores or online - and run the test yourself. You don't need the landlord's permission to test the air you're breathing. A short-term test takes 48 to 96 hours; a long-term test is more accurate for everyday conditions. If the level comes back high, that gives you something concrete to bring to your landlord. Document everything.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "We moved into a new house and the previous owners had the nursery in the basement. Should I test before we use it the same way?", "answer": "Yes. Always test a new home regardless of how the previous owners used it. Radon levels can change over time and the previous owners' comfort with a space doesn't tell you anything about the air quality. Grab a test kit and run it in the basement before you commit to using it as a nursery. It takes a few days and it's worth knowing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My baby has been sleeping in the basement for three weeks. The radon test just came back at 7.2 pCi/L. I'm scared.", "answer": "That's a high reading and your concern makes sense, but here's what's also true: three weeks of exposure, even at that level, is a very small fraction of the total cumulative exposure radon risk is built on. The harm from radon comes from years and years of breathing it. You are not facing a medical emergency right now. What you are facing is a situation that needs to be corrected - move the baby upstairs today and get mitigation scheduled. Talk to your pediatrician if you want a professional to reassure you. And then get that system installed so you can stop worrying.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "Can I just open windows in the basement nursery instead of paying for a mitigation system?", "answer": "Opening windows does temporarily dilute radon levels, but it's not a reliable or consistent fix - levels bounce back when you close them, and in cold climates you're not keeping windows open all year. A properly installed mitigation system works continuously and doesn't depend on weather or whether you remembered to crack the window. For a room where a baby sleeps every night, you want a real fix, not a workaround.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "We have a walkout basement nursery. Does the walkout help with radon?", "answer": "Walkout basements generally get more natural airflow than fully below-grade basements, which can help, but it doesn't mean radon isn't present or elevated. You still need to test - the only way to know your actual level is to measure it. Don't assume airflow or natural light means you're in the clear. Test and let the number tell you what you need to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "Should I retest after setting up the nursery? We tested the basement a year ago before the renovation.", "answer": "Yes, retest. A renovation changes the basement - you've potentially sealed some paths and opened others, changed the subfloor, added HVAC penetrations. The old test number may not reflect current conditions. Run a new test now that the space is finished, and make sure to test it as it will actually be used - windows closed, HVAC running normally.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My sister is setting up a basement nursery. She doesn't believe radon is real. What can I say to her?", "answer": "Radon is real - it's a naturally occurring radioactive gas and the EPA identifies it as the second leading cause of lung cancer in the United States after smoking. It's not a scare tactic or a marketing gimmick. It's invisible and odorless, which is why people don't intuitively believe it, but it's measurable and it's fixable. Tell her to test. A test kit is inexpensive. If the result is low, she has nothing to worry about. If it's high, she'll be glad she found out before setting up a nursery down there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "I'm pregnant and just found out our radon is 4.5 pCi/L. Should I be freaking out?", "answer": "I understand why this feels alarming, but try to take a breath. The radon risk we know about is long-term - lung cancer from years of cumulative radiation exposure, not something that harms a fetus in the short-term. The honest answer is that the science on direct fetal harm from radon is limited. Your bigger concern as a pregnant person is your own lungs over time. At 4.5 pCi/L you're above the EPA action level, so getting a mitigation system installed is absolutely the right move - but this is not an emergency that threatens your pregnancy today. Get the system scheduled and talk to your OB so you have medical guidance too.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "I found out I was pregnant and our radon test came back at 6.0 pCi/L. How fast do I need to fix this?", "answer": "At 6.0 pCi/L I'd prioritize getting mitigation scheduled promptly. Not because you're in an acute crisis, but because the longer elevated radon continues, the more cumulative exposure you accumulate - and you'll be living in that house for years with your child. Most mitigation jobs can be scheduled within a week or two. In the meantime, spending less time in the lowest level of the house is a reasonable precaution. Talk to your OB about your concerns - they can give you personalized medical perspective. And yes, get that system installed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "Can radon harm a fetus?", "answer": "The research on direct fetal effects from radon is not well-established. Radon is primarily understood as a lung cancer risk from inhaling radon decay products over many years - it's a radiation exposure issue for the lungs, not a chemical toxin that crosses the placenta. Even so, the science is incomplete, and no level of radiation exposure is entirely without theoretical risk. The right thing to do is address elevated radon for your own long-term health, talk to your OB if you have concerns, and not assume either that everything is definitely fine or that disaster is imminent.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My wife is 8 months pregnant and our basement radon is 4.3 pCi/L. Should we rush to fix it?", "answer": "Get it scheduled, but you don't need to treat it as a same-day emergency. At 4.3 pCi/L you're over the action level and mitigation is the right call. If your wife is spending significant time in the basement, it makes sense to minimize that while you wait for the job to be completed. A mitigation system takes a few hours to install once scheduled, and most contractors can get to you within a week or two. The risk from radon is long-term - a few more weeks while you get it properly fixed is not the crisis that the number might make it feel like.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "I'm 6 weeks pregnant and just found out our radon is 3.2 pCi/L. Do I need to do something now?", "answer": "At 3.2 pCi/L you're below the EPA's 4.0 pCi/L action threshold but in the range where they say it's worth considering mitigation. There's no bright line where 3.2 is perfectly fine and 4.0 is dangerous - it's a spectrum of risk. My honest take: if you're pregnant and planning to raise a child in this house, getting a mitigation system at 3.2 is a reasonable decision. It's not an emergency, but it's not something to ignore either. Talk to your OB and make a decision that lets you sleep at night.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "Is radon exposure during pregnancy dangerous for the baby?", "answer": "The primary established risk from radon is lung cancer in people who breathe elevated levels over many years. The science specifically on fetal development and radon is limited. Radon is a radioactive gas that affects the lungs - it's not a chemical that typically affects fetal development the way some other exposures do. Your best course of action is to address the radon for your own long-term health, consult your OB with any specific questions about your pregnancy, and not spiral into worst-case thinking. If your level is above 4.0 pCi/L, mitigate. That's the clear and actionable answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "We're trying to get pregnant and our radon just tested at 5.5 pCi/L. Should we fix this before we start trying?", "answer": "Yes, I'd fix it before you start trying - not because radon poses a well-documented pregnancy risk, but because you're about to add a person to the household who will live there for years, and getting the mitigation done now is just the smart move. You don't need to delay family planning to wait for the fix - a mitigation system can usually be installed within a few weeks of scheduling. Get it on the calendar now and retest after to confirm the level dropped.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My OB mentioned radon when I told her I was pregnant. She said to test. What level is worrying?", "answer": "Your OB gave you good advice. The EPA recommends taking action at 4.0 pCi/L or higher. Between 2.0 and 4.0 pCi/L, the recommendation is to consider mitigation - the risk is lower but real. Below 2.0 pCi/L, the risk is low, though it's worth noting there's no zero-risk level. Test your home, see where you land, and bring the result back to your OB if you want to discuss it further. If you're above 4.0, get it mitigated - don't sit on it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "I spent most of my first trimester working in the basement home office. Radon was 4.9 pCi/L. I didn't know. What do I do?", "answer": "First, stop spending extended time down there, especially while you wait for mitigation. Second, schedule a mitigation system - at 4.9 pCi/L that's the right call regardless. Third, bring it up with your OB so you have professional medical guidance on your specific situation. The radon risk model is based on cumulative long-term exposure - one trimester in a 4.9 pCi/L basement is a real exposure but not the decades-long pattern that produces the worst outcomes. You found out, you're acting on it. That's the right response.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "I had a miscarriage and now I'm wondering if radon could have caused it. Our level is 5.1 pCi/L.", "answer": "I'm so sorry for your loss. Radon is not an established cause of miscarriage - radon is primarily understood as a long-term lung cancer risk, not a cause of pregnancy loss. Miscarriage is unfortunately common and has many causes, most of which have nothing to do with environmental exposures. Please talk to your OB or a maternal-fetal medicine specialist about what happened - they're the right people to help you understand it. And yes, fix the radon in your home, because at 5.1 pCi/L you should regardless. But please don't carry guilt about something that almost certainly had nothing to do with radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My pregnant friend lives in a house with 7.8 pCi/L radon. Her landlord won't fix it. What can she do?", "answer": "She should document the radon test result in writing and send a formal written notice to the landlord requesting remediation. In many states, elevated radon in a rental property is a habitability issue. She can also contact her local health department to understand what legal options exist in her state. In the meantime, spending less time on the lowest floor of the home is a practical harm-reduction step. And she should absolutely talk to her OB about the situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "Does radon affect fertility?", "answer": "There isn't strong scientific evidence linking radon to fertility problems. Radon's established health risk is lung cancer from long-term inhalation of decay products - it's primarily a respiratory exposure, not a systemic chemical toxin. If you have fertility concerns, talk to your doctor about a full workup. Elevated radon is worth fixing for your long-term lung health, but I wouldn't add fertility anxiety on top of what you're already dealing with without a solid scientific basis for it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "I'm pregnant and we're about to move into a house. The sellers disclosed the radon is 4.1 pCi/L and they installed a system. Does that mean it's safe now?", "answer": "It means they installed a system, but you should retest to see where the level actually sits now. A system that was installed years ago and not maintained or retested may not be performing as well as it once did. Ask for the most recent post-mitigation test result. If you don't have one, run a new test yourself after you move in. The goal is a confirmed number below 4.0 pCi/L - ideally below 2.0 - not just the presence of a pipe.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My doctor told me to avoid radon during pregnancy. Our house hasn't been tested. What's the fastest way to get a result?", "answer": "A short-term test kit - the charcoal canister type - gives you a result in 48 to 96 hours. You place it in the lowest lived-in area of the home, leave it for the test period, then mail it to the lab. You can buy these at many hardware stores or order them online. If you want a faster answer or want someone to handle the testing for you, a professional test is another option. Either way, get the test started today.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "We're in the middle of a pregnancy and our radon system just broke. The level is back up to 5.8 pCi/L. How fast can we get it fixed?", "answer": "Get it looked at right away. If your fan failed - which is usually the culprit - it can often be replaced quickly, sometimes within a day or two. Call your mitigation contractor and tell them it's urgent. In the meantime, increase ventilation in the basement as much as practically possible and minimize time spent on the lowest level of the home. A non-functioning mitigation system with an infant or pregnant person in the house is something you fix fast, not something you put on a list.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "Can I sleep in my basement bedroom while pregnant if I open windows?", "answer": "Opening windows helps dilute radon temporarily but is not reliable or consistent - it depends on outdoor temperature, wind, and whether you actually remember to keep them open. For a sleeping space where you'll spend eight or more hours a night throughout your pregnancy, I'd either move upstairs or get a mitigation system installed. A few weeks of consistently opening windows is not the same protection as a system that runs continuously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "Is it okay to use the basement laundry room while pregnant if radon is 4.2 pCi/L?", "answer": "Short visits to a basement laundry room - a few minutes several times a week - represent a relatively small amount of cumulative exposure compared to sleeping or working down there. Even so, at 4.2 pCi/L you're over the EPA action level and mitigation is the right call for your home regardless. You don't need to stop doing laundry, but I'd minimize optional time in the basement while you get the system scheduled.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "My husband does woodworking in the basement every weekend. I'm pregnant. Is the radon from his hobby affecting me?", "answer": "The radon risk is from breathing the air in the space, not from the woodworking itself. If you're spending time in the basement with him, you're getting the same air exposure he is. If you're staying upstairs while he works down there, your exposure during those hours is minimal. Test the basement level, and if it's at or above 4.0 pCi/L, mitigate - both for your long-term health and for his. He's down there every weekend accumulating exposure too.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Baby Rooms and Nurseries in the Basement", "question": "Someone told me radon is more dangerous for pregnant women. Is that true?", "answer": "The primary risk of radon is lung cancer from long-term cumulative exposure - that applies to everyone, not specifically to pregnant women in a different way than it applies to others. There isn't strong evidence that pregnancy itself increases vulnerability to radon's lung effects. The concern is more about the child who will be born into and grow up in the home over the coming years. But if your level is above 4.0 pCi/L, pregnant or not, mitigation is the right answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My toddler spends all day in the basement playroom. Radon is 3.8 pCi/L. Should I be worried?", "answer": "At 3.8 pCi/L you're just under the EPA's 4.0 action level, but the EPA explicitly says levels between 2.0 and 4.0 are worth considering for mitigation - and a toddler spending most of their waking hours in a basement playroom is exactly the scenario where I'd take that recommendation seriously. Young kids breathe more rapidly than adults, and they're going to be in that house for a long time. Getting a mitigation system installed at 3.8 pCi/L for this situation makes sense to me.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My 3-year-old plays in the basement every day and the radon is 4.6 pCi/L. How concerned should I be?", "answer": "Concerned enough to schedule mitigation, which is the actionable thing here. At 4.6 pCi/L you're above the EPA threshold, and a child who plays down there every day is accumulating meaningful hours of exposure. The risk is long-term - it builds over years, not days - but a daily basement playroom situation across childhood is exactly the exposure pattern that makes mitigation worth doing. Get the system in and retest to confirm the level drops. Then you'll know the space is addressed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My kids play in the basement every day and the radon is 3.5 pCi/L. Is that okay?", "answer": "At 3.5 pCi/L you're in the zone where the EPA says to consider mitigation. It's not an emergency, but it's not something to file away and forget either. The honest answer is: kids in a basement playroom daily for years is a meaningful cumulative exposure scenario, and 3.5 pCi/L is above the average outdoor level of about 0.4 pCi/L by a significant margin. I'd seriously consider a mitigation system here, especially given how much time they spend down there. The cost is modest compared to the peace of mind.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My son is 2 and watches TV in the basement with his dad every evening. Radon is 4.1 pCi/L. What do I do?", "answer": "At 4.1 pCi/L you're at the EPA action threshold and mitigation is the recommended call. A couple of hours every evening in a basement adds up over years. I'd get the mitigation system scheduled - it's not an emergency that needs to be resolved by tonight, but I wouldn't let it drag on for months either. In the meantime, cracking a window if weather allows is a minor help. But get the actual fix done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "We have a basement with a big playroom and four kids who are always down there. Radon just tested at 5.2 pCi/L. We need to fix this, right?", "answer": "Yes, absolutely. At 5.2 pCi/L and four kids spending significant time down there, this is exactly the situation where mitigation matters. Get it scheduled soon. In the meantime, try to redirect some of that playtime to upper floors while you wait for the installation. This is very fixable - a sub-slab depressurization system will bring that level down significantly in most homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My 3-year-old has had a lot of coughs. Could it be from radon?", "answer": "Radon does not cause coughs or acute respiratory symptoms. It's a long-term risk - the harm comes from radiation exposure to lung tissue over many years, eventually increasing the risk of lung cancer. Coughs in a three-year-old are almost always from viruses, allergens, dry air, or other common causes. For the cough, see your pediatrician. For radon, test your home if you haven't already, and fix it if the level warrants it. Those are two separate conversations.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My daughter has asthma - does radon make that worse?", "answer": "Radon is not a known trigger for asthma attacks or asthma symptoms - it doesn't irritate airways the way dust, mold, or smoke do. Radon causes harm through radiation to lung tissue over many years, which is a different mechanism entirely. If your daughter's asthma is poorly controlled, talk to her allergist or pulmonologist about triggers, because there are plenty of more likely culprits. Even so, if your home tests high for radon, fix it - a child with a respiratory condition shouldn't have additional long-term lung risks on top of that.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My kids spend half the day in a finished basement. The radon is 2.8 pCi/L. Should I mitigate?", "answer": "At 2.8 pCi/L you're in the EPA's \"consider mitigation\" range. Whether you do it comes down to your tolerance for risk and your situation. Kids spending significant hours daily in a basement over the course of childhood is a meaningful cumulative exposure. I'd lean toward mitigating at 2.8 pCi/L given that context, but I also recognize this isn't a clear-cut action-level situation. At minimum, I'd do a longer-term test to confirm the reading, and then make the call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "Is radon more dangerous for children than adults?", "answer": "Children breathe more rapidly than adults, which means they may take in more radon decay products per unit of time. They also have more years ahead of them, which means cumulative exposure over a lifetime is higher if the problem isn't addressed. Both of those factors point in the same direction: for families with kids, especially young children, taking radon seriously and mitigating above the action level is a particularly good call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My toddler is obsessed with the basement. He wants to be down there all the time. Radon is 4.8 pCi/L. Do I just tell him no or fix it?", "answer": "Fix it. Telling a toddler \"no basement\" indefinitely is not a practical long-term solution, and it doesn't address the radon that you and your spouse are also breathing when you go down there. Get the mitigation system installed, retest to confirm the level dropped, and then the basement can go back to being his favorite place without you having to worry about it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My kids have a bedroom in the basement. Radon is 4.3 pCi/L. Should I move them upstairs?", "answer": "Yes, I'd move them upstairs while you get mitigation scheduled. Sleeping in a space represents eight or more hours of exposure per day - the most concentrated daily exposure scenario outside of working from home in the basement. At 4.3 pCi/L with children sleeping there, move them upstairs as a precaution, get the system installed, and retest before you move them back.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My 4-year-old has been in daycare in a basement classroom. Should I ask about radon testing?", "answer": "That's a completely reasonable thing to ask about. Radon exposure in schools and daycares is a real concern, and many states require or recommend testing in childcare settings. Ask the director what their radon testing history looks like. If they haven't tested recently, or ever, that's worth raising with other parents and, if needed, with your state health department.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "We just had a baby and the nursery is on the main floor but the basement is 5.0 pCi/L. Should I fix it even if the baby isn't down there?", "answer": "Yes. A 5.0 pCi/L basement affects the whole house over time - radon can migrate upward through floors and living spaces. The nursery being on the main floor helps, but it doesn't mean upper levels are entirely unaffected. More importantly, as your child grows, they'll eventually spend time in the basement. Get the mitigation system in now while you're in home-improvement mode.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My 5-year-old keeps complaining of headaches and I'm scared it's radon. We have elevated levels.", "answer": "Radon does not cause headaches. It does not cause acute symptoms at all - no headaches, no fatigue, no sore throat. Radon causes lung cancer risk over many years of exposure. Your child's headaches need to be evaluated by a pediatrician, who will look at much more likely causes. Fix your radon if it's elevated, but don't connect the headaches to radon - that's not how radon works.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My kids' playroom is directly above the basement slab. Radon tested at 3.9 pCi/L in the basement. Is the playroom okay?", "answer": "Levels on upper floors are typically lower than in the basement because radon concentrates at the entry points near the slab. But radon does migrate upward through floor gaps and penetrations. Test the playroom itself with a monitor or short-term test kit to see what the actual level is up there - don't assume it mirrors the basement reading. If the basement is 3.9 pCi/L, addressing it through mitigation will reduce levels throughout the home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "Is it safe for kids to be in the basement at all if radon is 3.0 pCi/L?", "answer": "At 3.0 pCi/L you're below the EPA action level but above the level where they say risk is negligible. \"Safe\" is a word I avoid with radon because it implies a bright line that doesn't really exist. At 3.0, kids spending time in the basement isn't a crisis situation, but given how much time they'll be in that house over the years, I'd seriously consider mitigation. The risk is real and the fix is practical.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My son was diagnosed with childhood leukemia. He spent a lot of time in the basement where radon was 4.5 pCi/L. Could radon have caused this?", "answer": "I'm so sorry your family is going through this. Radon is not an established cause of childhood leukemia - the health risk from radon is lung cancer in adults from long-term inhalation, not leukemia. Childhood cancers have complex and often unknown causes, and attributing this to radon is not supported by the science. Please bring this question directly to his oncology team - they are the right people to address the medical side. And take care of yourselves through this.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My 7-year-old has started doing homework in the basement. Radon is 4.2 pCi/L. Do I need to worry?", "answer": "At 4.2 pCi/L, yes, mitigation is the right call. Homework time every day is cumulative exposure that adds up over years, and your child is going to be in that house for a long time. Get the system scheduled. It doesn't need to be resolved by tomorrow, but I wouldn't drag it out for months either.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "We have a trampoline in the basement and the kids are down there constantly. Radon is 5.7 pCi/L. How urgent is this?", "answer": "At 5.7 pCi/L with kids spending significant daily time down there, I'd call this fairly urgent. Schedule mitigation within the next week or two if possible, and in the meantime, see if you can redirect some of that trampoline time to other spaces. This is a fixable problem - don't let it sit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "My kids are 2 and 4. Is childhood radon exposure more harmful than adult exposure?", "answer": "The mechanism is the same - radon decay products irradiate lung tissue - but children have two factors working against them: they breathe faster, taking in more volume of air per unit of time, and they have more years of life ahead, meaning cumulative exposure builds longer. A child exposed to elevated radon starting at age 2 has more total exposure years ahead of them than an adult starting at 40. That's why families with young kids who find elevated radon should treat mitigation as a priority.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Toddlers and Young Kids in the Basement", "question": "Is there any reason NOT to mitigate if I have young kids and elevated radon?", "answer": "No. If your level is at or above 4.0 pCi/L, there's no reasonable argument against mitigation when young children live there. The cost of a system is modest, the installation is minimally disruptive, and the long-term benefit is real. Some people hesitate because they think the level will drop on its own - it won't, reliably. Others worry about cost - but there's no dollar amount worth putting against years of elevated exposure for kids. Get it done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "Are infants more vulnerable to radon than adults?", "answer": "Infants breathe faster than adults, which means they pull in more air per minute relative to their body size, and they're going to be living in that home for a very long time. Both factors mean that if radon is elevated, an infant in the home has more cumulative exposure ahead of them than an adult would. That's a meaningful reason to treat elevated radon seriously when there's a baby in the house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "My twins just started crawling. They spend time on the basement floor. Radon is 3.5 pCi/L.", "answer": "Radon levels are typically slightly higher near the floor because that's where the gas enters from the slab - it settles and disperses upward. Crawling babies do spend more time close to the floor than adults do, which is worth keeping in mind. At 3.5 pCi/L you're in the EPA's \"consider mitigation\" zone. With twins who are going to be crawling and then toddling around a basement space for years, I'd seriously lean toward getting the system in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "My baby started crawling and the basement floor is where the radon comes in. Is that worse for them?", "answer": "Radon gas is heaviest near the soil entry points, but it mixes with the room air relatively quickly in an enclosed space. The floor-level concern is real but shouldn't be overstated - the entire basement air is elevated, not just a band right at the floor. The most important thing is the overall level in the room, and if that's at or above 4.0 pCi/L, mitigation addresses the whole space. Get the level down through a proper system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "My 6-month-old is starting to spend time on a play mat in the basement. Radon is 4.4 pCi/L. Should I stop using the basement?", "answer": "At 4.4 pCi/L, yes, I'd minimize basement time for the baby while you arrange mitigation. You don't need to permanently abandon the basement - you need a mitigation system installed. That's the real fix. In the meantime, moving playtime upstairs is a reasonable precaution that costs you nothing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "Can radon hurt a newborn?", "answer": "Radon's established health risk is lung cancer from long-term cumulative exposure - it doesn't cause acute harm in newborns (or anyone else in the short term). But a newborn will be in your home for many years, and if radon is elevated, that cumulative exposure starts building from day one. For that reason, elevated radon in a home with a newborn is worth addressing promptly. Not because of an immediate danger, but because you want those lungs developing in the cleanest air you can reasonably provide.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "My baby is 4 months old and the radon in our house is 4.9 pCi/L. I feel like a terrible parent.", "answer": "You found out and you're doing something about it - that's the opposite of a terrible parent. Most people have no idea what their radon level is. You know yours. Now get a mitigation system installed, minimize the baby's time on the lowest level while you wait for the appointment, and get it resolved. The risk from radon is cumulative over years, not weeks. You've caught this early in your child's life. Act on it and move forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "My son sleeps in a basement bedroom. He's 8 months old. Radon is 4.7. Should I move him upstairs?", "answer": "Yes, I'd move the crib upstairs while you get mitigation scheduled. A sleeping space is where people accumulate the most daily exposure, and at 4.7 pCi/L that's worth addressing carefully. Move him upstairs now, get the system installed, retest to confirm the level came down, and then you can make an informed decision about where the nursery goes long-term.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "Does radon affect a baby's lungs differently than an adult's lungs?", "answer": "Babies have developing lungs, and there's general concern about any environmental exposures during developmental stages. The specific research on radon and infant lung development isn't well-established, but what we do know is that radon exposure is cumulative and that babies breathe faster than adults, increasing their air intake rate. The practical takeaway is the same as with older children: elevated radon is worth addressing in any home where a baby will be growing up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "My baby spends a lot of time in a baby carrier and I work from my basement office. Radon is 5.3 pCi/L. Is the baby getting more exposure?", "answer": "If you're carrying the baby in the basement throughout the workday, yes, the baby is getting substantial exposure to the same air you are. At 5.3 pCi/L, that's a meaningful concern. I'd work from an upper floor while you arrange mitigation, or at minimum set up a different space for the baby while you work downstairs. Get the mitigation system scheduled promptly - this is one of the higher-exposure scenarios I'd want to see addressed quickly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "I babywear and the basement is where I spend most of my time. Radon is 4.1 pCi/L. Is this a problem for my baby?", "answer": "At 4.1 pCi/L you're over the EPA action level, and if you and the baby are spending substantial hours daily in the basement, that exposure accumulates. Get the mitigation system scheduled, and in the meantime try to shift more of your daily time to upper floors. The risk is long-term, not immediate, but \"long-term\" starts accumulating now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "My baby's playmat is right on the basement floor. Should I be extra worried about radon near the floor?", "answer": "Radon does enter through the slab and is somewhat more concentrated near floor level before it disperses into the room air. But a well-designed mitigation system addresses the source - the sub-slab pressure - not just the floor-level air. If your level is elevated, get mitigation done. Moving the playmat a foot off the floor doesn't solve the underlying problem; fixing the radon level does.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "How long would a baby need to be exposed to elevated radon before it's a health concern?", "answer": "Radon risk is understood in terms of total lifetime cumulative exposure - it's not a threshold you cross in a specific number of days or months. The more relevant framing is: the sooner you fix it, the less cumulative exposure your child accumulates over the coming years. There's no point at which someone says \"okay, they've been exposed 90 days so now we must act.\" The right time to act is as soon as you know the level is elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "My baby was born three months ago and we just tested and have 6.8 pCi/L radon. I'm devastated.", "answer": "I hear you, and the feeling makes complete sense when you're trying to protect a new baby. But here's the honest picture: three months is a very small slice of the cumulative lifetime exposure that radon risk is built on. You found out. You're going to fix it. That's the right response. Move the baby's sleeping space upstairs while you wait for installation, get the mitigation system in, confirm the level dropped, and then raise your child in a home you've actually addressed. You're not devastated - you're informed and acting.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Infants and Crawling Babies", "question": "My infant has been sleeping in the basement for 2 months. Radon is 5.0 pCi/L. Is the damage done?", "answer": "No. Two months of exposure at 5.0 pCi/L is not a fixed amount of irreversible damage that can't be addressed. Radon risk is about total cumulative lifetime exposure. Your baby has a very long life ahead, and the most important thing you can do is address this now so that the remaining years of that life happen in a lower-radon environment. Move the nursery upstairs, get mitigation done, retest. That's the path forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "My kids play in the basement every day and the radon is 3.8 pCi/L. Is that close enough to 4.0 that I should just do it?", "answer": "Yes, I'd do it. You're close enough to the action level that the EPA's \"consider mitigation\" recommendation applies, and you have kids in that space every day. The difference between 3.8 and 4.0 is not meaningful in terms of actual health risk - what matters is the ongoing daily exposure in that space. Get the system in and get peace of mind.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "We have radon at 4.0 pCi/L. Is that the EPA limit or just a guideline?", "answer": "It's a guideline, not a legal limit. The EPA recommends taking action at 4.0 pCi/L or higher. It's the level at which they say the risk is high enough that mitigation is clearly warranted. Below 4.0 pCi/L, particularly in the 2.0 to 4.0 range, the EPA says to consider mitigation - the risk exists, it's just lower. There's no level below which radon is completely risk-free.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "Our radon is 2.5 pCi/L and I have two young kids. The mitigation contractor says we don't need it at that level. Is he right?", "answer": "Technically, 2.5 pCi/L is below the EPA action level. But the EPA also says levels between 2.0 and 4.0 pCi/L are worth considering for mitigation, especially if you have specific reasons to be concerned - like young kids who will be in the house for decades. If the contractor is saying \"you're under the threshold,\" that's accurate. If he's saying \"don't worry about it at all,\" I'd push back a little. The decision is yours to make with the full picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "My baby's room tested at 2.0 pCi/L exactly. Is that okay?", "answer": "At 2.0 pCi/L you're below the consideration range - the EPA says look at it between 2.0 and 4.0. You're at the low end. That's a relatively low level, and the risk is genuinely lower. I'd keep an eye on it and consider a long-term test to confirm the reading, but this isn't a situation where I'd be urgently pushing you toward mitigation. If it were higher, different conversation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "My son sleeps in the basement bedroom. Radon is 4.7. Should I move him upstairs?", "answer": "Yes. At 4.7 pCi/L in a sleeping space, especially for a child, I'd move him upstairs while you arrange mitigation. A bedroom is where people accumulate their most daily exposure because you're there eight or more hours at a stretch. Get him out of there temporarily, schedule the system, confirm the level drops after installation, and then make the call about where he sleeps long-term with good information.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "Our basement tested 5.0 pCi/L. My kids' bedrooms are on the second floor. Should I still mitigate?", "answer": "Yes. A 5.0 pCi/L basement can influence upper floor levels, and your kids' bedrooms on the second floor are likely lower than the basement but not necessarily at a low level. More importantly, the basement is part of your home - you're all breathing some of that air all the time. And as kids grow, they'll spend more time in the basement. Get the system in and then test the upper floors to see where things stand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "The radon in my basement is 3.2 pCi/L but my daughter's room is directly above the basement slab. Should I test her room?", "answer": "Yes, that's a smart thing to do. The room directly above the slab may have higher radon levels than other rooms on the main floor. Run a test in her room specifically - not just the basement. If the room is elevated, that changes your calculus significantly. And if the basement is 3.2, there's a reasonable chance upper floors are lower, but \"reasonable chance\" isn't the same as confirmed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "We have different radon levels in different rooms. Basement is 6.2, first floor is 2.1. My kids sleep on the first floor. Do I still need to mitigate?", "answer": "The basement at 6.2 pCi/L needs to be mitigated regardless - that's significantly elevated. The first floor reading of 2.1 is lower and on its own wouldn't necessarily be an action-level trigger. But the basement level affects the whole home over time, and a system that brings the basement down will typically improve upper floor levels too. Address the source and retest throughout the home after.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "My kids' playroom is in the basement. Radon is 4.9 pCi/L. How much does mitigation actually reduce it?", "answer": "In most homes, a properly installed sub-slab depressurization system reduces radon levels by 50 to 90 percent or more. A home at 4.9 pCi/L often ends up at or below 2.0 pCi/L after mitigation - sometimes considerably lower. Results vary based on the home's construction, soil type, and the system design. You retest after installation to confirm where things landed. If the first pass doesn't get it low enough, adjustments can be made.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "Our house has a 4.2 pCi/L reading and a neighbor's house has a 1.5 pCi/L reading. Why such a difference?", "answer": "Radon levels vary dramatically from house to house even on the same street. Soil composition under individual homes, foundation cracks and construction differences, basement finishing, and HVAC patterns all contribute. Your neighbor's low reading tells you nothing about your home's level - and vice versa. This is exactly why testing every home individually matters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "I tested the basement at 4.1 pCi/L but my kids mostly play in the finished basement family room, not the unfinished utility area. Does it matter which part of the basement?", "answer": "Radon levels can vary somewhat within the same basement, but in a connected space you're generally breathing similar air throughout. The finished family room may have slightly different levels than the utility area, but \"somewhat lower\" isn't a reliable enough difference to make a meaningful decision on. The safe approach is to test where your kids actually spend time, and if that space is elevated, address it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "We just found radon at 8.3 pCi/L and my kids play down there every day. This is really bad, isn't it?", "answer": "8.3 pCi/L is a high reading - well above the action level. I want to be honest with you about that without alarming you beyond what's useful. Radon risk is cumulative over years, so what's happened so far is not reversible but it's also not a catastrophe relative to the whole lifetime picture. What matters now is: stop the kids from spending time in the basement right now, get mitigation scheduled as a priority, and confirm the level drops after installation. The faster you act, the better the outcome.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "My son's radon test came back at 4.7 pCi/L in his basement bedroom. Is a mitigation system promised to fix it?", "answer": "No reputable contractor will give you a warranty on a specific outcome number, because radon has variables that can't be fully predicted before the work is done. What I can tell you is that a properly designed and installed system brings levels down significantly in the vast majority of homes. Post-installation testing is always part of the process - you test after to confirm where you landed, and if additional adjustments are needed, they get made. The goal is getting below 4.0 pCi/L, ideally well below it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-kids-baby-pregnancy-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "What if my radon is just barely above 4.0? My kids don't spend much time in the basement.", "answer": "At 4.0 pCi/L the EPA recommendation is to mitigate regardless, and \"my kids don't spend much time there now\" is a statement that will likely change as they get older. More practically, the whole-house air is influenced by the basement level. Getting a system installed when you're just over the threshold isn't overkill - it's the sensible response to the guidance. And if you sell the house someday, buyers will appreciate a tested and mitigated home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Specific Radon Levels - What They Mean for Families", "question": "Our radon is 3.0 pCi/L. The test lasted 90 days so it's pretty accurate. Still mitigate with young kids?", "answer": "A long-term test at 3.0 pCi/L is a solid data point. That level is below the EPA action threshold but above where they say risk is negligible. With young children who will be in the home for many years, the cumulative exposure question is real. My honest take: at 3.0 with young kids and a confirmed long-term reading, I'd lean toward mitigation - but I'd also tell you this is genuinely a judgment call, not an obvious slam dunk the way 5.0 pCi/L would be. Think about how much time the kids spend in basement spaces, and factor that in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Asthma, Respiratory Concerns, and Health Questions", "question": "My daughter has asthma and the basement radon is 5.1 pCi/L. Should I be extra worried?", "answer": "Radon doesn't trigger asthma symptoms - it's a different kind of harm entirely. Radon causes lung cancer risk through long-term radiation to lung tissue, not through irritation or inflammation the way asthma triggers do. So the asthma itself isn't made acutely worse by radon. Even so, a child with a respiratory condition shouldn't have the additional long-term lung risk of elevated radon exposure. Fix the radon. That's the right call for any child, but especially one with lung disease.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Asthma, Respiratory Concerns, and Health Questions", "question": "My son has been wheezing and someone told me to check my radon. Our level is 4.6 pCi/L.", "answer": "Radon does not cause wheezing. Wheezing is an acute symptom caused by airway irritation or obstruction - from allergens, viruses, cold air, smoke, mold, or asthma. Radon causes long-term lung cancer risk with no acute symptoms. Get your son seen by a pediatrician for the wheezing - that needs attention on its own terms. And yes, at 4.6 pCi/L you should also fix the radon, but those are two separate issues.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Asthma, Respiratory Concerns, and Health Questions", "question": "My kid keeps getting respiratory infections. Our house has elevated radon. Is there a connection?", "answer": "No established connection. Radon doesn't cause respiratory infections - those are caused by bacteria and viruses. Radon's harm is long-term radiation to lung tissue, not immune suppression or airway inflammation. Frequent respiratory infections in kids are common and usually related to daycare or school exposure to pathogens, allergens, or sometimes indoor air quality issues like mold or dry air. Get the radon fixed, and separately talk to your pediatrician about the infections.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Asthma, Respiratory Concerns, and Health Questions", "question": "My daughter has been coughing for months. We have 4.3 pCi/L radon. Can radon cause a cough?", "answer": "Radon does not cause coughs - this is a common misconception. Radon has no acute symptoms whatsoever. It's invisible, odorless, and tasteless, and the only established harm is an increased risk of lung cancer after years of high cumulative exposure. A months-long cough in a child needs to be evaluated by a doctor - that's a real symptom with many possible causes, none of which are radon. Fix your radon at 4.3 pCi/L because it's above the action level, but don't link the cough to it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Asthma, Respiratory Concerns, and Health Questions", "question": "Is radon linked to asthma in children?", "answer": "There's no established scientific link between radon exposure and asthma in children. Asthma is a condition involving airway inflammation and hypersensitivity - radon causes harm through a completely different mechanism: radiation exposure to lung cells that can eventually cause cancer. Indoor air quality matters for asthma, but the relevant triggers are allergens, dust mites, mold, pet dander, and irritants like smoke. Radon isn't on that list.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Asthma, Respiratory Concerns, and Health Questions", "question": "My son has a chronic cough and the doctor said his lungs sound fine. Could radon be causing it?", "answer": "Radon cannot cause a chronic cough or any symptoms you can feel. It is completely symptomless. The harm from radon comes after years of exposure in the form of increased lung cancer risk - it doesn't irritate airways, produce inflammation, or cause coughs. If your son's cough isn't explained by an obvious cause, his doctor may want to investigate reflux, post-nasal drip, allergies, or other possibilities. Radon is not on that list.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Asthma, Respiratory Concerns, and Health Questions", "question": "My daughter was just diagnosed with a lung issue. We have high radon at 5.8 pCi/L. Did radon do this?", "answer": "I'd be doing you a disservice if I gave you a yes to that question - I can't make medical determinations and neither can anyone outside of medicine. What I can say is that radon's established harm is lung cancer after long-term adult exposure, and most pediatric lung conditions have causes other than radon. Talk to her pulmonologist about all relevant exposures and factors. And fix your radon - at 5.8 pCi/L that's the right call regardless.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Asthma, Respiratory Concerns, and Health Questions", "question": "I have a child with cystic fibrosis. Does radon make CF worse?", "answer": "There's no established research showing radon specifically worsens cystic fibrosis. Radon causes harm through a different mechanism than CF's underlying lung disease. Even so, a child with CF has compromised lungs and I'd want every possible environmental stressor minimized. If your home has elevated radon, get it mitigated - not because radon causes CF complications, but because you want the cleanest possible air for a child with a lung condition.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Asthma, Respiratory Concerns, and Health Questions", "question": "My son has had pneumonia twice this year. Could radon be related?", "answer": "Radon does not cause pneumonia. Pneumonia is an infection - bacterial, viral, or fungal. Radon causes lung cancer risk over long-term exposure, not infection. Two bouts of pneumonia in one year in a child is worth a thorough conversation with your pediatrician about immune function and respiratory health. Separately, if your radon is elevated, fix it - but don't attribute the pneumonia to it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Asthma, Respiratory Concerns, and Health Questions", "question": "My child was recently diagnosed with lung cancer. She's 9. I'm looking at every possible cause and our radon was 6.0 pCi/L. Did radon cause it?", "answer": "I'm deeply sorry. This is not a question I can answer, and neither can any contractor. Radon-linked lung cancer is primarily an adult disease associated with decades of cumulative exposure - childhood lung cancer is rare and typically has different underlying causes. Please work with her oncologists who have her full history and imaging. They are the people who can help you understand what you're facing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Daily Basement Life and Cumulative Exposure", "question": "My kids literally live in our basement - it's their bedroom, playroom, everything. Radon is 4.0 pCi/L. How bad is this?", "answer": "At 4.0 pCi/L you're at the EPA action threshold. And with kids spending essentially all of their home time in the basement - sleeping, playing, hanging out - the daily exposure hours are as high as they get. This is a strong case for getting a mitigation system installed. Not because today is an emergency, but because cumulative exposure is exactly what you're looking at with this setup over many years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Daily Basement Life and Cumulative Exposure", "question": "We homeschool in the basement and the radon is 4.5 pCi/L. My kids are down there 6-8 hours a day. Should I be panicking?", "answer": "Panicking doesn't help, but acting does. At 4.5 pCi/L with that many daily hours of exposure for your kids, I'd make this a high priority to schedule and fix. Move the school setup to an upper floor in the meantime - you can do that this week while you wait for the installation appointment. Six to eight hours a day is a significant chunk of exposure time. Get the system in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Daily Basement Life and Cumulative Exposure", "question": "We have a finished walkout basement and the kids eat lunch, do homework, and play down there all day. Radon is 3.7 pCi/L.", "answer": "At 3.7 pCi/L you're in the consideration range, and the number of hours your kids spend in that space is substantial. A walkout basement usually has better airflow than a fully below-grade basement, but it doesn't eliminate radon. For a space that's getting that much daily use from kids, I'd lean toward mitigation at 3.7 pCi/L. The exposure hours are high enough that it makes sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Daily Basement Life and Cumulative Exposure", "question": "My kids play in the basement every single weekend - basically all day Saturday and Sunday. Radon is 4.2 pCi/L. Is that level of weekend exposure a concern?", "answer": "At 4.2 pCi/L you're above the action level and mitigation is the right call. Weekend exposure adds up over years - if you own this home for ten or fifteen years, those Saturdays and Sundays represent a lot of cumulative hours. The right answer isn't to restrict weekend basement time; it's to fix the radon so the space is properly addressed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Daily Basement Life and Cumulative Exposure", "question": "My kids' favorite thing is our basement game room. Radon is 5.5 pCi/L. Do I have to take it away from them?", "answer": "Not permanently. Get the mitigation system installed, retest to confirm the level came down, and then the game room can go back to being their favorite place - without you having to worry about what they're breathing. The goal isn't to take away the basement. It's to fix the air in it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Daily Basement Life and Cumulative Exposure", "question": "We have a basement gym and my kids work out down there. Radon is 4.6 pCi/L. Does exercising increase radon exposure?", "answer": "Yes, in a meaningful way. When you exercise, your breathing rate increases, which means you're inhaling more air - and therefore more radon - per unit of time than if you were sitting still. Exercise in an elevated-radon space is a higher-exposure activity than resting in the same space. At 4.6 pCi/L with kids exercising there, I'd treat this as a priority for mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Daily Basement Life and Cumulative Exposure", "question": "My teenagers spend hours in the basement every night. Radon is 3.9 pCi/L. Do I need to say something to them?", "answer": "You can share the information with them - teenagers are capable of understanding a long-term risk. More practically, at 3.9 pCi/L you're right under the action level and in the consideration range. Given the hours they're spending down there, I'd seriously consider getting a mitigation system. That's the real solution, not restricting where your kids hang out.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Daily Basement Life and Cumulative Exposure", "question": "My kid's friend basically lives at our house and spends all his time in our basement. Radon is 5.0 pCi/L. Should I say something to his parents?", "answer": "That's a thoughtful thing to consider. If the level is 5.0 pCi/L, you should be getting mitigation done regardless - and at that point you can let his parents know what you found and what you've done about it. You don't need to alarm them, but giving them the information is the decent thing to do. \"We found elevated radon and we're getting it fixed\" is a complete and honest message.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Daily Basement Life and Cumulative Exposure", "question": "My baby sitter takes care of the kids in the basement every day while I work. Radon is 4.8 pCi/L. Should I move them upstairs or tell her?", "answer": "Both. Tell the sitter, because she deserves to know what she's breathing too. And move the childcare space upstairs while you arrange mitigation. At 4.8 pCi/L in a daily-use childcare environment, the right answer is to fix it and move the activity in the meantime.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Daily Basement Life and Cumulative Exposure", "question": "The kids are down in the basement 3-4 hours a day after school. Radon is 4.1 pCi/L. At what point does the daily time become a meaningful exposure?", "answer": "There's no bright line - any exposure at elevated levels contributes cumulatively. Three to four hours a day adds up significantly over months and years. At 4.1 pCi/L with that daily pattern, you're in the right range to take action. The EPA's action recommendation applies, and the daily exposure hours your kids are accumulating make it a clear case for mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Daily Basement Life and Cumulative Exposure", "question": "My kids sleep with the basement door open and their rooms are on the main floor. Radon in basement is 5.3 pCi/L. Is the gas getting into their rooms?", "answer": "Radon can migrate from the basement to upper floors, especially through open stairwells and doorways. Whether the main floor rooms are significantly affected depends on the specific dynamics of your home. I'd test the main floor - especially the rooms where the kids sleep - to get actual numbers. And yes, mitigate the basement at 5.3 pCi/L regardless. That level isn't something to leave unaddressed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "How do I test for radon near my baby's sleeping area?", "answer": "Place a test kit - either a charcoal canister or an electret ion chamber - in the lowest level where the baby spends time. If the baby sleeps in the basement, test there. If the baby sleeps on the main floor but the basement is below, you can test both. Follow the kit instructions: close windows and doors before and during the test, and leave the canister in place for the specified time period (usually 48 to 96 hours for short-term). Then mail it in to the lab.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "I bought a radon monitor to put in my baby's room. The reading changes a lot throughout the day. Is that normal?", "answer": "Yes. Radon levels fluctuate throughout the day and even hour to hour based on air pressure, HVAC cycling, outdoor temperatures, and other factors. A single spot reading from a monitor isn't as meaningful as the average over days or weeks. Most electronic monitors give you a running average, and that's the number to pay attention to. A single high reading doesn't mean the whole-day average is that high, and vice versa.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "Should I put a radon monitor in the baby's room or the basement?", "answer": "Test wherever the concern is highest. If the baby sleeps on the main floor, test the main floor - specifically the room where they sleep. The basement may have higher radon, but the main floor is what affects the baby directly. Ideally, test both. The basement reading gives you context about the source; the room reading tells you what the baby is actually breathing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "My husband says we should retest every year now that we have a baby. Is that overkill?", "answer": "No, that's actually good practice. Radon levels can change over time as the home settles, the foundation shifts, or renovation work disturbs pathways. An annual test or check with a continuous monitor gives you current information rather than relying on old data. For a home with young children, staying on top of the radon level is reasonable and responsible.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "We have a radon mitigation system that was installed 5 years ago. We now have a baby. Should we retest?", "answer": "Yes. Post-installation retest results from five years ago don't tell you where the level is today. Systems can have issues over time - fan wear, pressure changes, new cracks in the foundation. Test the home now and consider retesting every few years going forward. If the system has a pressure indicator gauge, that gives you a basic signal that the fan is operating, but it doesn't confirm the radon level itself - you still need to test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "What kind of radon test should I get for a home with young kids?", "answer": "A long-term test (90 days or more) gives you the most accurate picture of your average annual exposure, which is more relevant to long-term health decisions than a snapshot. If you want a quick answer first, a short-term test (48-96 hours) gets you a result faster, but follow it up with a long-term test or a continuous monitor for confirmation. For a home where you're making decisions about young children's spaces, good data matters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "My radon monitor just read 6.0 pCi/L in my baby's room (main floor). The basement hasn't been tested yet. What do I do?", "answer": "Get the basement tested to understand the source, but more immediately: a 6.0 pCi/L reading in the baby's room itself is a significant result that warrants action. Don't wait for the basement test to start thinking about mitigation. Contact a mitigation contractor, describe what you've found, and get someone out to assess the home. If the main floor is reading that high, the basement is almost certainly higher.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "I'm a nervous new parent and I'm worried about everything. Is radon actually a significant risk for my baby?", "answer": "It's a real risk, not an imagined one - but it's a manageable one. Radon is the second leading cause of lung cancer in the US, but the exposure that causes that risk accumulates over decades. The right response is to test your home, and if it's above 4.0 pCi/L, get it mitigated. That's actionable and effective. You don't need to add radon to your mental list of things to worry about daily - you need to test once and, if needed, fix it once. Then it's handled.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "How soon after having a baby should we test for radon?", "answer": "As soon as possible, ideally before or right after the baby comes home. Many radon professionals will tell you the best time to test is before you buy a home; the second best time is now. If you haven't tested and you're about to have a baby, pick up a test kit today and get it running. You'll have results within a few days to a couple of weeks depending on the type of test, and then you'll actually know what you're dealing with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "We tested radon a few years ago and it was 2.0 pCi/L. Now we have kids. Do we need to retest?", "answer": "Yes. Radon levels can change over time as homes age, soil conditions shift, and any renovation or settling alters air pathways. A test from a few years ago is historical data, not a warranty of current conditions. With kids now in the picture, having a current reading is worth the modest effort of running a new test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-kids-baby-pregnancy-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "My neighbor has a mitigation system and their radon is now 0.4 pCi/L. Is that realistic for my house?", "answer": "0.4 pCi/L is about the average outdoor radon level, and yes, some homes after mitigation achieve numbers that low. Results vary - some homes get to 0.4, others land at 1.0 or 1.5. The goal is to get well below 4.0 pCi/L, and most properly installed systems achieve that. Your neighbor's result is a good sign for your neighborhood's geology, but your home's specific result will depend on its construction and the system design.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "Is an electronic radon monitor better than a test kit for a home with young kids?", "answer": "A continuous electronic monitor gives you ongoing data and alerts you if levels spike, which is useful for a home where you're actively monitoring. A test kit gives you a more lab-verified snapshot but only represents the period it was deployed. For a family with young kids, having a continuous monitor is a nice complement to periodic lab-based tests - you can see trends and catch problems quickly. But if you're starting from scratch with no data, either one is better than guessing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Testing, Monitoring, and Family Decisions", "question": "My cousin said I should test the basement and the baby's room separately. Is that right?", "answer": "Yes, that's good advice. The basement is where radon typically enters, but the baby's room is where the baby actually breathes. If the nursery is on the main floor, you want to know that specific room's level - not just infer it from the basement. Testing both gives you the full picture and helps you understand how much radon is migrating from the basement to upper floors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Mitigation Timing and Urgency for Families", "question": "How fast do I need to get radon mitigated when I have kids in the house?", "answer": "Fast enough to treat it seriously, but not so fast that you skip doing it right. A typical mitigation job can be scheduled within a week or two in most areas. The risk from radon is cumulative over years - a couple of weeks while you get a good contractor scheduled doesn't change the long-term picture. But months of delay? That's exposure that didn't need to happen. Get it on the calendar promptly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Mitigation Timing and Urgency for Families", "question": "Can I do anything to immediately reduce my kids' radon exposure while I wait for mitigation?", "answer": "Yes. Maximize ventilation in the basement - open windows if weather allows, run exhaust fans. Minimize the time kids spend on the lowest level of the home. If a child's bedroom is in the basement, move them upstairs temporarily. Seal any obvious cracks in the basement floor or walls with caulk (this is a minor help, not a solution). These steps reduce exposure while you wait, but they're not substitutes for a properly installed mitigation system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Mitigation Timing and Urgency for Families", "question": "We just found out about our radon (4.9 pCi/L) and I have a 6-month-old. Should I skip the line and call emergency services?", "answer": "Radon is not an emergency services situation - it's not a gas leak or an acute hazard. No one needs to evacuate. The risk is long-term cumulative. What you should do is call a radon mitigation contractor, explain your situation including the baby, and ask how soon they can schedule. Many contractors can prioritize families with infants. Move the baby's sleeping area upstairs in the meantime.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Mitigation Timing and Urgency for Families", "question": "My wife insists we wait until we can afford mitigation. Our radon is 5.3 pCi/L and we have three kids under five. What do I say?", "answer": "The cost of mitigation is a practical concern and I understand it. What I can tell you is that every month of delay at 5.3 pCi/L is additional exposure for three young kids who will be in that home for the next fifteen to twenty years. Many mitigation contractors work with homeowners on scheduling and can discuss payment options. And some states have programs to assist with mitigation costs for lower-income households. If cost is the barrier, let's look at what's available - but delay has its own cost.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Mitigation Timing and Urgency for Families", "question": "My radon contractor said I need to wait 6 weeks for an appointment. Is there anything I can do in the meantime?", "answer": "Yes. Maximize basement ventilation, minimize the kids' time on the lowest level of the home, and if any kids are sleeping in the basement, move them upstairs while you wait. Six weeks is a real window of continued exposure, so take the practical steps to reduce it. And if the kids are spending a lot of time in the basement, actively redirect that activity to upper floors while you wait.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Mitigation Timing and Urgency for Families", "question": "We own the house and my wife wants to do DIY radon mitigation because we have a baby. Is that a good idea?", "answer": "DIY mitigation kits exist and in some simple cases they work. But there's a lot that goes into a properly designed system - identifying where gas is entering, determining the right suction point, selecting the right fan for the home's specific conditions, ensuring negative pressure is achieved under the slab. For a home with a baby where you want confirmed results, I'd lean toward a professional installation. The cost difference is relatively modest for the confidence that it was done correctly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Mitigation Timing and Urgency for Families", "question": "We already have a mitigation system but the fan just died. Our baby is home every day. How urgent is the repair?", "answer": "Urgent. A failed fan means the system isn't operating, and your radon level may be rebounding - sometimes quickly, depending on your home's geology. Contact your mitigation contractor about a fan replacement and tell them you have an infant in the home. Many can schedule repairs quickly. Test the level in the meantime if you have a monitor or test kit available so you know what you're dealing with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Mitigation Timing and Urgency for Families", "question": "We got the mitigation system installed two weeks ago. How soon can I move my baby back to the basement bedroom?", "answer": "Wait until you have a confirmed post-installation test result. Most contractors recommend testing 24 to 48 hours after installation and running a short-term test for at least 48 hours after that to confirm the level. Until you have a confirmed number below 4.0 pCi/L - and ideally well below that - keep the baby upstairs. Systems almost always work, but you want confirmation, not assumption.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Mitigation Timing and Urgency for Families", "question": "The mitigation company says they can't get to us for three weeks. Baby is 4 months old. Radon is 5.7 pCi/L.", "answer": "Three weeks at 5.7 pCi/L is real exposure, but it's a small fraction of the cumulative exposure that radon risk is built on. In the meantime: move the baby's sleeping area to an upper floor, maximize basement ventilation, and minimize time the baby spends downstairs. You're doing the right thing by getting it scheduled. Don't let the wait paralyze you - take the practical steps you can.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Mitigation Timing and Urgency for Families", "question": "My house has been mitigated and we confirmed the level is 1.8 pCi/L. We're about to have our first baby. Is there anything else I should do?", "answer": "1.8 pCi/L is a good result - well below the EPA action level. I'd plan to retest every few years to confirm the system is maintaining that level, and make sure the system's pressure indicator (the U-tube manometer or gauge) is showing positive pressure, which tells you the fan is running. Other than that, you've done the work. Bring your baby home with confidence.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Mitigation Timing and Urgency for Families", "question": "Should radon be fixed before or after finishing a basement for a playroom?", "answer": "Before. It's almost always easier to install a mitigation system in an unfinished or partially finished basement than after the drywall, flooring, and framing are fully in. The contractor has better access to the slab, can properly locate the suction point, and the work is less disruptive. If you're about to finish a basement for a playroom, test first, mitigate if needed, and then build around the system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Moving Bedrooms and Rearranging Spaces", "question": "My son sleeps in the basement bedroom. Radon is 4.7. I want to move him upstairs but we only have one other bedroom and my other kid is in it. What do I do?", "answer": "Move him in with the other kid temporarily - even sharing a room for a few weeks while mitigation gets scheduled and installed is a better situation than a basement bedroom at 4.7 pCi/L. This doesn't need to be a permanent arrangement. Get the system installed, retest, confirm the level is down, and then you can revisit the room situation with real information about whether the basement bedroom is safe long-term.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Moving Bedrooms and Rearranging Spaces", "question": "My daughter has been sleeping in the basement for two years. We just tested and it's 4.1 pCi/L. I wish I'd tested sooner. What now?", "answer": "Move forward. You know now and that's what matters. Get her upstairs while you schedule mitigation. The two years at 4.1 pCi/L are in the past - they're real exposure, but they're also a relatively small piece of a long childhood. The most important thing now is addressing it going forward. Get the system in, retest, and move on without carrying guilt about what you didn't know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Moving Bedrooms and Rearranging Spaces", "question": "My teenage son has a basement bedroom and says he doesn't care about radon. Radon is 5.0 pCi/L. Is it okay to let him stay down there?", "answer": "This is your house and your call as a parent. At 5.0 pCi/L I'd say the answer is no - not because the risk is acute or immediate, but because cumulative exposure over his teenage years is real, and you have the ability to fix it. Get the mitigation system installed, confirm the level drops after, and then you've addressed the actual problem rather than just rearranging furniture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Moving Bedrooms and Rearranging Spaces", "question": "We moved our daughter out of the basement bedroom when we found radon at 4.8 pCi/L. She's upset and wants her room back. When can she have it?", "answer": "When you have a confirmed post-mitigation test showing the level is below 4.0 pCi/L - and ideally below 2.0 pCi/L. That's the real answer. Get the system installed as quickly as you can, run the post-installation test, and if the numbers are good, she can have her room back. You can frame it to her that way - the room isn't gone, it's just waiting on a fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Moving Bedrooms and Rearranging Spaces", "question": "My husband wants to build a bedroom in the basement for our son. Should we test first or build first?", "answer": "Test first, every time. If the basement has elevated radon, you'll want to mitigate before you finish the space. Building around a mitigation system is much easier than retrofitting one after the bedroom is fully finished. Save yourself the headache and get the test done before the first piece of drywall goes up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Moving Bedrooms and Rearranging Spaces", "question": "We remodeled and moved the nursery to the main floor away from the basement. Radon in the basement is still 5.5 pCi/L. Is the main floor nursery okay?", "answer": "The main floor nursery is likely better than the basement would have been, but the basement's 5.5 pCi/L level is still influencing the home's overall air. Test the nursery specifically - get an actual reading in that room. And regardless of what that reading says, at 5.5 pCi/L in the basement, mitigation is the right call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Moving Bedrooms and Rearranging Spaces", "question": "We're expecting a baby and converting the basement into a nursery. What should we do about radon?", "answer": "Test the basement now before you invest in the renovation, and if the level is at or above 4.0 pCi/L (or even in the 2.0 to 4.0 range, given you're talking about a baby's sleeping space), mitigate before finishing the space. It's much easier and cleaner to install a sub-slab system in an unfinished basement than after the drywall is up. Build the nursery around a fixed, confirmed low-radon space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Moving Bedrooms and Rearranging Spaces", "question": "We have a guest room in the basement that we want to convert to a baby's room. The basement tested at 3.6 pCi/L two years ago. Should we retest?", "answer": "Yes. Two-year-old data isn't current data, and converting a room to a nursery is a good reason to run a fresh test. At 3.6 pCi/L two years ago, you were in the consideration range. Retest to see if it's changed, and factor the result into your decision about whether to mitigate before setting up the nursery.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Moving Bedrooms and Rearranging Spaces", "question": "My baby's room is on the second floor but I want to give her more space. The basement guest room is big. Radon is 4.2 pCi/L. Should I move her down there?", "answer": "At 4.2 pCi/L I'd say no to moving the nursery to the basement without mitigation first. Mitigate, retest, and then if the level is confirmed low, you can make that call with good information. Don't move a baby's sleeping space to an above-action-level environment for the sake of more square footage.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Moving Bedrooms and Rearranging Spaces", "question": "My kids want to trade rooms and one of them wants the basement bedroom. Radon is 4.5 pCi/L. What do I tell them?", "answer": "Tell them the basement bedroom is on hold until you get a fix installed. At 4.5 pCi/L it's a legitimate reason to say the room isn't ready. Get the mitigation done, retest, and then if the level is confirmed below the threshold, the trade can happen. You don't need to explain every detail of radon to kids - \"we're fixing the air down there first\" is enough.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "We just bought a house and immediately found the radon is 5.8 pCi/L. We have a 2-year-old. Did we make a mistake buying this house?", "answer": "You didn't make a mistake - you found out and now you can fix it. Elevated radon is one of the most fixable problems a home can have. It's not structural, it's not mold, it's not foundation failure. It's air, and air can be addressed with a mitigation system that typically costs a few hundred dollars and takes a few hours to install. Get it scheduled, get it done, and then you'll have a home where the radon has been properly addressed from the start.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My mom says radon testing is a scam and I shouldn't worry about it. I have a baby and 4.9 pCi/L radon. Who's right?", "answer": "Radon is not a scam. It's a naturally occurring radioactive gas identified by the EPA, the CDC, the Surgeon General, and public health agencies worldwide as the second leading cause of lung cancer in the United States. The concern is real, the testing is real, and the mitigation is real and effective. With a baby in the home and a 4.9 pCi/L reading, get the system installed. Your mom's skepticism doesn't change what the test found.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "We're renting and our landlord refuses to test for radon. I have two kids. What are my options?", "answer": "You can buy a test kit and test yourself - you don't need the landlord's permission to test the air you're breathing. If it comes back elevated, you have documented evidence to present to the landlord and potentially to your local housing authority. Some states have explicit tenant protections around radon in rental properties; contact your local health department to find out what applies in your area. Document everything in writing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My kids were in daycare in a building that recently tested high for radon. Is there anything I can do medically?", "answer": "Radon doesn't cause acute illness and there's no blood test or medical scan to assess radon exposure or its effects. The health risk from radon is lung cancer risk that accumulates over long exposures - it's not something that shows up clinically after months of daycare. Talk to your pediatrician if you want a professional's reassurance. More importantly, ask the daycare what they're doing to address it and confirm they've mitigated and retested.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My kids were born and raised in this house and we just tested for the first time. Radon is 6.0 pCi/L. The kids are now 10 and 14. How do I process this?", "answer": "I understand why this is hitting hard. But here's what's also true: radon causes elevated lung cancer risk over decades of exposure, primarily in adults - the data comes largely from miners with very high, very prolonged exposures. Your kids being in a 6.0 pCi/L home for ten or fourteen years is real cumulative exposure, and I won't minimize that. But it doesn't mean they're sick or that anything is inevitable. What you can control now is what happens going forward: get the system installed, bring the level down, and their remaining years in that home happen in a fixed environment. That's what matters now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My child has been growing up in a 5.2 pCi/L house. We're finally fixing it now that I know. Is the damage already done?", "answer": "You can't undo past exposure, but you can stop future exposure from accumulating. That's genuinely meaningful. The risk from radon is about total lifetime cumulative exposure - every year going forward in a mitigated home is a year of lower exposure. Get the system in, confirm the level is down, and give your child the rest of their time in that home in better air.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My baby was in the NICU for six weeks. We just got home and found our radon is 4.3 pCi/L. This is too much.", "answer": "I hear you - you've had an incredibly stressful start and this feels like one more thing landing on top of everything else. You're not in an acute emergency right now. Move the baby's sleeping space to the lowest-radon area of the house while you arrange mitigation. Your baby was in a NICU - they had excellent medical care and you brought them home. Now you're taking care of the home. Get the mitigation scheduled, exhale a little, and take it one step at a time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My son was adopted from another country and has lived in four different homes. Now in our house radon is 4.6 pCi/L. I feel like I keep failing him.", "answer": "You're not failing him - you're finding and fixing things. Radon is invisible and the vast majority of people never test. You tested. You found it. You're fixing it. His previous homes may have had higher or lower radon - there's no way to know, and spending energy on what you can't know doesn't help him. What helps him is fixing the home he lives in now. Do that, and then let it go.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "I'm a single mom with three kids and I found out my radon is 5.1 pCi/L. I don't know where to start.", "answer": "Start with a mitigation contractor. Call or get online and find a certified radon mitigation professional in your area - they'll assess your home, explain the system, and give you a quote. Some states have assistance programs for households in your situation. The actual installation process is usually quick - a few hours, one day. You don't need to know a lot about radon to take that first step. Just make the call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My parents kept us in a high-radon basement as kids. Now I'm raising my own kids and I can't stop thinking about it.", "answer": "The best thing you can do for your own peace of mind is test your current home and address it if needed. Radon is very fixable today - the systems are effective and well-established. If you're worried about your own long-term health from childhood exposure, talk to a doctor. They can discuss your risk profile and what screening options exist. For your kids, you're already doing the right thing by paying attention to it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "We found out our radon is 4.8 pCi/L two days after we brought our new baby home from the hospital. What do I even prioritize?", "answer": "Baby first: move the sleeping space to the highest floor in the home if the nursery is in the basement or main floor above the basement. Then call a mitigation contractor this week and schedule the installation. That's the list. Two things. The rest will take care of itself. Radon is not a crisis that needs to be solved in the next 24 hours, but it is something you should resolve in the next few weeks. You can do both of those things.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "Is radon testing covered by health insurance or FSA/HSA?", "answer": "This varies by insurance plan and varies by whether the product is classified as a health expense. Some HSA accounts may allow radon testing as a qualified medical expense - it's worth checking with your HSA administrator. I can't tell you definitively what your specific plan covers, so check with your benefits provider. Mitigation is typically not covered by health insurance but may qualify for certain energy efficiency credits or state programs.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "I have a new baby and I'm already testing the air quality for VOCs and CO2. Should radon be on that same list?", "answer": "Yes, absolutely. Radon should be part of any thoughtful indoor air quality review, especially in a home with a new baby. VOCs and CO2 have their own concerns, but radon is a carcinogen with specific and well-documented long-term risk. It's testable, it's fixable, and it belongs on your list alongside the other things you're paying attention to.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "We have both high radon and mold in the basement. Which do I fix first?", "answer": "Fix both, but they're often addressed differently. Mold has acute health effects and can cause immediate symptoms, especially in young children. Radon has long-term risk but no acute effects. Practically, you may be able to schedule mitigation and mold remediation around the same time. Don't let one delay the other. Both of them matter, and both of them are fixable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My contractor said ventilating the basement with an HRV will help radon. Is that true with kids in the house?", "answer": "An HRV (heat recovery ventilator) can help dilute radon by bringing in fresh outside air, and it's sometimes part of a radon management strategy. However, it's generally considered a less reliable solution than sub-slab depressurization, especially for homes with elevated levels. For a home with young kids and confirmed elevated radon, I'd want sub-slab depressurization as the primary approach. An HRV is a nice complement, not a substitute for a proven mitigation system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My kids keep finding the mitigation system pipe and asking what it is. What do I tell them?", "answer": "Tell them the truth in age-appropriate terms: \"That pipe helps keep our air clean. It pulls a gas called radon out from under the house before we breathe it.\" Kids can handle that. It's actually a good opportunity to teach them something real about how homes work and why we pay attention to invisible things we can't see or smell.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "Someone told me the radon from a granite countertop is more dangerous than soil radon for babies. Is that true?", "answer": "No. Granite countertops do emit very small amounts of radon, but the levels involved are generally negligible compared to soil-source radon entering through the foundation. The dominant source of radon in homes is the soil below. The granite countertop concern is largely overstated and shouldn't distract you from the real source of radon to address.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My baby is formula-fed and I mix the formula with tap water. Should I worry about radon in the water?", "answer": "Some private wells in certain regions can have elevated radon in the water, but this is a different issue from airborne radon in the home - and it's much less common and generally lower risk. If you're on municipal water, radon in water is typically not a concern because water treatment removes it. If you're on a private well, you can test the water for radon separately. For most families, the air is the primary concern, not the water.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "Our house is 100 years old with a stone foundation. My kids play in the basement all the time. How worried should I be about radon?", "answer": "Old stone and rubble foundations are notoriously leaky - they have more entry points for radon than a modern poured-concrete slab. I'd get a test done immediately. Older homes with rubble foundations can have higher radon levels than newer construction. If the test comes back elevated, mitigation is still very possible in most cases, though the system design may need to account for the older foundation type. Test first and go from there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My sister keeps saying radon only matters in basements and my kids play on the first floor. Is she right?", "answer": "She's partially right - basements typically have the highest concentrations because radon enters through the slab. But radon migrates upward and first-floor levels, while usually lower than the basement, can still be elevated depending on the home's construction and sealing. It's worth testing upper floors as well, especially if the basement is elevated. And if your kids do spend time in the basement at all, that matters regardless of the first-floor level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My son has juvenile arthritis and his doctor recommended he spend time resting, which often means the basement. Radon is 3.9 pCi/L. What do I do?", "answer": "Radon is a long-term lung-cancer risk. For personal medical concerns, talk with a doctor. If your home has elevated radon, Bill can explain what mitigation would involve.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-kids-baby-pregnancy-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "I'm a preschool teacher and we're in a basement classroom. Radon tested at 4.6 pCi/L. Should I raise this with the administration?", "answer": "Yes, you absolutely should. At 4.6 pCi/L in an occupied classroom - especially one with young children - mitigation is warranted. Put your concerns in writing to the administration, cite the EPA action level, and ask what steps they're planning. Many states have guidance or requirements for radon in schools and childcare facilities. Your local health department can be an ally if the administration is unresponsive.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "We have a finished basement with a bedroom, playroom, and home office. Kids sleep and play there. Radon is 5.0 pCi/L. How do I tell my family what we're dealing with?", "answer": "Tell them directly and calmly: \"Our radon test came back at 5.0 pCi/L, which is above the level the EPA recommends fixing. We're getting a mitigation system installed and in the meantime we're going to use the upstairs more. It's fixable - we're just going to fix it.\" That's it. No dramatics needed. The situation has a clear solution; present it that way.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My husband is in the military and we live in base housing. Radon is elevated in our basement. Who do I contact?", "answer": "Contact your housing office and put the concern in writing, including your test result. Military family housing is subject to environmental health standards, and radon is included. If the housing office is unresponsive, your installation's environmental health officer or the base medical facility may be able to help you escalate. You have a right to safe housing for your family.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My baby was just born and we're moving into a new construction home next month. Should I still test for radon?", "answer": "Yes. New construction doesn't mean low radon - the house sits on the same ground as any other house, and radon entry depends on soil, foundation design, and construction details. Some new homes come with passive radon systems (a pipe but no fan) that can be activated if the level warrants it. Test in the first few months after you move in and find out where you stand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My kids are ages 1, 3, and 6. Radon is 4.5 pCi/L. Which kid do I worry most about?", "answer": "They all matter equally and the answer for all three is the same: get the mitigation system installed so all of them are in a lower-radon environment going forward. The one-year-old has the most years of exposure ahead, but the six-year-old has already accumulated six years. Worrying about which kid to prioritize is the wrong frame - the fix helps all of them equally. Do the fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "I'm a new parent and I feel overwhelmed by all the things I'm supposed to protect my baby from. How important is radon on that list?", "answer": "It's real and it's worth addressing, but it's also one of the most actionable things on the list. Test your home. If the level is elevated, fix it. That's a complete resolution - unlike some other concerns that require ongoing vigilance, radon mitigation installs a system that works continuously without further action from you. Test once, fix if needed, retest to confirm, and then radon is done. That's a solvable problem on what can feel like an overwhelming list.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "I'm a pediatric nurse and parents often ask me about radon. What should I tell them?", "answer": "The key points: radon is a real risk, it's the second leading cause of lung cancer in the US, it has no acute symptoms (so you can't feel it), it's measurable only by testing, the EPA recommends action at 4.0 pCi/L or higher, and it's highly fixable. Encourage parents to test their homes and to take results seriously if they come back elevated. Referring them to EPA resources or a certified mitigation professional is a practical next step.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My wife is a worrier and ever since we found out our radon is 4.2 pCi/L she can't sleep. What do I do?", "answer": "Get the mitigation system scheduled and booked - a firm appointment on the calendar helps a lot of people because it means the fix is coming, not just hypothetically pending. Remind her that the risk is cumulative over years and not an immediate threat to your family today. And get it fixed quickly so she can have real peace of mind rather than just reassurance. Action is better than comfort in this case.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My son is in the Boy Scouts and they use a basement meeting room at a church. Is that a radon concern?", "answer": "It can be. Basements in public buildings can have elevated radon just like basements in homes. The troop leaders or church administration may not have thought about it. If you're concerned, ask whether the space has been tested. It's a reasonable question to raise, and if it hasn't been tested, it's worth doing - especially if kids are gathering there regularly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "Is there a \"safe\" radon level for kids?", "answer": "No. The EPA doesn't use the word \"safe\" with radon because even low levels carry some theoretical risk. What they have is an action level (4.0 pCi/L) and a consideration range (2.0 to 4.0 pCi/L). Below 2.0 pCi/L, the risk is low and comparable to what you'd encounter outdoors. For kids, I'd say: get the level as low as reasonably achievable, and treat the EPA action level as a clear call to mitigate, not a ceiling to inch under.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My baby has a lot of skin issues and someone told me radon could be causing eczema. Is that true?", "answer": "No. Radon does not cause eczema or skin conditions. Radon is a gas that affects lung tissue through inhaled radiation - it has no known connection to skin conditions. Eczema has many causes including genetics, allergens, dry air, food sensitivities, and other factors. Talk to your pediatrician or a pediatric dermatologist about the skin issues. And if your home has elevated radon, fix it - but don't link the two.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My kids' radon test came back lower than I expected - only 1.4 pCi/L. Can I stop worrying about it?", "answer": "1.4 pCi/L is a low result - below the level where the EPA suggests consideration of mitigation and close to typical outdoor concentrations. That's good news. I'd retest in a few years to confirm the level hasn't changed, but you don't need to carry ongoing anxiety about radon at that level. You tested, you got a good result, and you know where you stand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "We're considering adding a basement bedroom for our teenage son. Radon is 3.4 pCi/L. Should we fix it before converting the space?", "answer": "Yes. You're in the consideration range at 3.4 pCi/L, and converting a space to a bedroom changes the daily exposure profile dramatically - a sleeping space means eight or more hours a day instead of occasional visits. Install mitigation before finishing the bedroom. It's much easier to do during the conversion than after, and you'll know going in that the space has been properly addressed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My kids keep getting bloody noses in the winter when we run the heat and I worry about radon. Are these connected?", "answer": "No. Bloody noses in winter are almost universally caused by dry air - indoor heating drops humidity, dries out nasal passages, and makes them prone to bleeding. Radon has no connection to bloody noses or any acute symptoms. A humidifier in the kids' bedrooms during dry winter months will likely help. And test for radon separately if you want to know that level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My son was born with a heart defect. Does radon pose additional risk for him?", "answer": "Radon is a lung cancer risk, not a cardiovascular risk. There isn't established science linking radon to heart conditions. His heart defect is its own medical situation managed by his cardiologist. Even so, a child with any chronic medical condition deserves the best possible indoor air quality. If your home has elevated radon, fixing it is part of providing that - not because it's specifically connected to his heart, but because lung health matters for everyone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My daughter has low oxygen saturation levels. Her cardiologist mentioned environmental factors. Could radon affect blood oxygen?", "answer": "Radon does not directly affect blood oxygen levels. Radon decays in the lungs and the concern is long-term radiation to lung cells - it doesn't acutely impair oxygenation. If your daughter's saturation levels are a concern, that's a conversation for her cardiologist and potentially a pulmonologist. If your home has elevated radon, fix it for the long-term lung health picture, but it's not what's causing low oxygen saturation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "I have four kids and a large basement playroom that everyone uses all day. Radon is 6.4 pCi/L. This seems really serious.", "answer": "At 6.4 pCi/L with four kids spending all day in that space, yes - I'd want this resolved quickly. This is a high-use, high-exposure scenario with a significantly elevated level. Get mitigation scheduled as soon as possible. Redirect the kids' daily activities to upper floors in the meantime. This isn't a situation to normalize or put on the back burner. Call or text and we can talk through what makes sense for your home's setup.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My son with ADHD does his best work in the basement. Radon is 4.3 pCi/L. Should I keep him down there or move him?", "answer": "Move him upstairs while you get mitigation scheduled. ADHD or not, a basement at 4.3 pCi/L is worth addressing, and the workspace situation can be revisited once the level is confirmed to be down after installation. His best work environment can exist on an upper floor while you get the basement fixed - it might take some adjustment, but the tradeoff is worth it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My wife works from home and has our baby in her basement office all day. Radon is 5.6 pCi/L. How do I convince her to move upstairs?", "answer": "Show her the EPA numbers - at 5.6 pCi/L, that's well above the action level, and spending the whole workday there with the baby means both of them are accumulating significant daily exposure. The baby especially. The ask isn't permanent - it's while you get mitigation scheduled and installed, which usually takes a few weeks to get to the top of the queue. That's a reasonable temporary adjustment with a clear endpoint.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "I found out about elevated radon when I was 7 months pregnant. I've been working in the basement all pregnancy. I'm terrified.", "answer": "I understand the fear, and I want to give you an honest answer rather than empty reassurance: the research on radon and pregnancy specifically is limited. What we know is that radon's primary harm is lung cancer from long-term cumulative exposure. Seven months of basement work is real exposure - for you, not primarily for the fetus as a direct target. Talk to your OB, give them the radon level, and let them address your pregnancy-specific questions. Get out of the basement now and get mitigation scheduled. You're doing the right things.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "Is there an advocacy organization I can contact about radon and kids' health?", "answer": "The EPA has a Radon Program with public resources. The American Lung Association also addresses radon as a lung health issue. The Conference of Radiation Control Program Directors (CRCPD) can point you toward state-level radon programs. These are legitimate organizations with public health mandates. If you want practical help with your own home's situation rather than advocacy resources, call or text and we can talk through what the numbers mean and what to do next.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My son's school is in the basement of an old building. Parents are never told what the radon level is. How do I find out?", "answer": "You can ask the school principal or district facilities manager directly. Many states require periodic radon testing in schools, and those results may be public record. Your state radon program (a quick search for \"[your state] radon program\" will find it) can tell you what testing requirements exist for schools in your state. If the school hasn't tested or won't share results, that's worth raising with other parents and potentially the school board.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My baby sleeps 12-14 hours a day. That means a lot of time in the nursery. Radon in the nursery is 2.8 pCi/L (main floor). Is that a concern?", "answer": "At 2.8 pCi/L on the main floor, you're below the EPA action level but in the consideration range. For a baby sleeping 12 to 14 hours a day in that room, the cumulative daily exposure is higher than for a space that's used casually. I'd take that seriously and consider testing again with a longer-term test to confirm the reading. If you confirm it's around 2.8 pCi/L, mitigation is a reasonable decision given the hours involved.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My daughter is starting kindergarten this fall and her classroom is in a basement. Should I say something before school starts?", "answer": "You can ask the school whether the classroom has been tested for radon. Do it in writing - email is fine. Reference the EPA action level of 4.0 pCi/L and ask for the most recent test results for that classroom specifically. It's a reasonable question that any parent can ask, and if the school hasn't tested, you've planted a seed for them to do it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My twin daughters share a basement bedroom. Radon is 4.1 pCi/L. Is it worse because there are two of them in the room?", "answer": "Two people in the room doesn't change the radon concentration in the room - but it does mean two children accumulating that exposure. At 4.1 pCi/L you're at the action level and I'd move them both upstairs while mitigation is scheduled. The \"two kids\" factor doesn't change the radon physics, but it does double the reason to take it seriously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "How do I talk to my kids about radon without scaring them?", "answer": "Keep it simple and factual: \"We found something in the air in our basement called radon. It's invisible and it's something we need to fix, so we're getting a pipe put in that will take it away. It's not dangerous right now and we're fixing it.\" Kids generally handle calm, factual information well. What scares kids is adults being scared and not explaining things. Lead with the solution, not the problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My son's friend group always hangs out in our basement. Radon is 4.9 pCi/L. Am I responsible for their exposure?", "answer": "That's a genuine ethical consideration. You know the level; they don't. I'd say yes, it's worth either redirecting where the friend group hangs out while you get mitigation done, or letting the other parents know you're aware of the issue and are in the process of fixing it. You're not the EPA and you're not their parents, but knowing about it changes the situation. Get the fix done and in the meantime move the hangout upstairs.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My child was exposed to elevated radon at a relatives' house for an extended stay. What do I tell the pediatrician?", "answer": "Tell them the facts: your child stayed at a location with elevated radon for [duration] at approximately [level] pCi/L if you have that information. Your pediatrician can factor that into context. Radon doesn't cause acute illness, so don't expect alarming medical responses - but disclosing it is the right thing to do so the doctor has a complete picture of potential exposures.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "We just had our mitigation system installed. Radon went from 5.4 to 1.1 pCi/L. My kids are finally safe, right?", "answer": "That's a great result - 1.1 pCi/L is a significant reduction and well below the action level. \"Safe\" is a word I avoid with radon because no level is entirely without theoretical risk, but 1.1 pCi/L is a low level that reflects a properly functioning system. Retest every couple of years to confirm the system is maintaining that level, and if you have a pressure gauge on the system, check it occasionally to make sure the fan is running. Well done for getting this done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My kids want to set up a bedroom for sleepovers in the basement. Radon is 4.6 pCi/L. Is it okay for occasional use?", "answer": "Occasional one-night sleepovers are different from daily sleeping exposure - the cumulative dose from occasional use is much lower than from a full-time bedroom. But at 4.6 pCi/L I'd still want to get the mitigation done before regular use of the basement as a sleeping space, even occasional. The fix resolves the question entirely and then you don't have to have this conversation every time someone wants to sleep down there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My 8-year-old loves science and wants to learn about radon. How do I explain it?", "answer": "That's a great opportunity. Tell him: radon is a gas that comes from uranium in the ground, which slowly breaks down underground. As it breaks down, it releases radon, which floats up through soil and into houses. We can't see it or smell it, but we can measure it with special detectors. Too much radon over a long time can hurt your lungs. So scientists figured out how to fix it - they put a pipe and fan under the house to pull the gas out before it gets inside. It's a real science problem with a real engineering solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My wife is pregnant with our second child. We have a 3-year-old who plays in the basement every day. Radon is 4.0 pCi/L. With a new baby coming, should we prioritize this now?", "answer": "Yes. Two children in the picture - one already spending daily time in the basement and a new one coming - makes this a clear priority. At 4.0 pCi/L you're at the action threshold. Get the mitigation scheduled now while your wife is still pregnant, so the system is installed and confirmed before the new baby arrives. That's the best outcome for everyone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "What do I do if I call a mitigation contractor and they tell me my 4.8 pCi/L level isn't a big deal because I don't have kids in the basement?", "answer": "Get a second opinion. At 4.8 pCi/L the EPA recommends mitigation. Any contractor who tells you elevated radon isn't a big deal based on where your kids currently sleep is giving you incomplete guidance - kids grow, habits change, and the whole-house air is influenced by the basement level. If the first contractor isn't taking it seriously, call another one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My kids are teenagers now but I want to fix the radon because they're still home for several more years. Is it worth it for teenagers?", "answer": "Absolutely. Teenagers are still accumulating years of exposure, and their lungs have decades ahead of them. The risk from radon is about total cumulative lifetime exposure, and there are plenty of years left to influence. Fixing radon when your kids are teenagers is better than never fixing it, and better than waiting until they leave home. The system benefits you and your spouse as well.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "What's the first thing I should do when I find out I have elevated radon and young kids?", "answer": "Get out of the lowest level of the home as much as practically possible while you arrange the fix, especially for sleeping - that's where you accumulate the most daily exposure. Then call a state licensed mitigation contractor, describe your situation and the level, and schedule the installation. You don't need to turn your life upside down in the meantime, but you do want to minimize unnecessary time in the highest-radon spaces. The most important thing is getting the system scheduled today, not tomorrow.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My baby is due in two months and we just found out our radon is 4.5 pCi/L. Is two months enough time to get it fixed?", "answer": "Yes, two months is typically plenty of time to schedule and complete a mitigation installation. Get on the phone today and schedule an assessment. Once you have a confirmed appointment, you'll know it'll be done well before the baby arrives. After installation, run the post-mitigation test and confirm the level dropped. Two months is actually a comfortable runway for this.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "I feel like I've been poisoning my kids for years because of radon I didn't know about. How do I stop feeling this way?", "answer": "You can't poison something you don't know exists, and you can't fix what you didn't know was broken. The only reasonable standard to hold yourself to is what you do with information once you have it. You have it now. You're fixing it now. That's what good parenting looks like - not perfect information from day one, but action when you find out. Be hard on the situation, not on yourself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My mom keeps sending articles about radon being overblown. But I have young kids and I'm worried. Who do I listen to?", "answer": "Listen to the EPA, the CDC, the American Lung Association, and the Surgeon General - all of whom identify radon as the second leading cause of lung cancer in the United States. Radon isn't overblown. It's one of the most evidence-supported environmental health risks in residential settings. You have young kids. Test your home. If the level warrants it, fix it. That's the straightforward answer regardless of what articles circulate in the family chat.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My 9-year-old daughter asked why we're moving her out of the basement bedroom. What do I tell her?", "answer": "Tell her the truth in simple terms: \"We found a gas called radon under the house that we need to fix. It's not dangerous today, but we're making the house better, and while we do that we want you upstairs. Once it's fixed, we'll talk about your room again.\" Kids often handle honesty better than vague reassurances, and a 9-year-old can understand a home repair project. Keep it matter-of-fact and she'll take her cue from your tone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "Should I get radon tested before or after a basement renovation where my kids will eventually have their rooms?", "answer": "Before. Always before. If you renovate first and then find out radon is elevated, you're retrofitting a system into a finished space, which is more complicated and more expensive than planning for it during the renovation. Test first, mitigate if needed during the renovation process, and build the finished rooms knowing the air has been addressed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My son is about to go to college. He'll be gone most of the year. Is it still worth fixing our 4.6 pCi/L radon?", "answer": "Yes - for the months he's home, for you, and for any future occupants including younger siblings or grandchildren. Radon affects everyone in the home, not just the person you're immediately focused on. At 4.6 pCi/L, fix it regardless of who is living there full-time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My neighbor's mitigation contractor said our house is \"too new\" to have a radon problem. Is that right?", "answer": "No, that's not right. New construction can and does have radon problems - the soil under a new house contains the same uranium as the soil under an older house. Some new homes are built with passive radon-resistant features, but those features don't eliminate the need to test. Test your home regardless of its age. If the contractor said new homes can't have radon problems, I'd get a second opinion on any work they do.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "My family lives above a basement that we never use. Do we still need to test and potentially mitigate?", "answer": "Yes. An unused basement can still have elevated radon that migrates upward into your living spaces. The radon doesn't know you're not using the basement - it still enters through the slab and seeps upward through floors, penetrations, and openings. Test the living areas and the basement itself. If either is elevated, mitigation addresses the source.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "We've been in our house for 12 years and never tested. We have four kids ranging from 2 to 10. Should I be scared to find out?", "answer": "Get the test. Fear of a number doesn't change the number - you just don't know it yet. If it comes back low, you'll have twelve years of peace of mind retroactively confirmed. If it comes back elevated, you'll fix it and protect your family for the next decade. Either way, the test gives you information. Not having it doesn't protect you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Special Circumstances and Harder Questions", "question": "I want to call someone about radon but I don't know where to start. I have a baby at home and this is stressing me out.", "answer": "Start simple: call or text a local certified radon mitigation professional and describe your situation - baby at home, level you found, how long you've been in the house. They'll take it from there. You don't need to know a lot about radon to make that call. If you want to talk through what you've found before making any decisions, fill out the form on the website or give us a call. We're happy to help you understand what the numbers mean for your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Questions from First-Time Parents and New Homeowners", "question": "My dad says he raised kids in a basement for years and they're all fine. So why does it matter for my baby?", "answer": "Radon risk is statistical - it raises the probability of lung cancer over a lifetime, it doesn't warranty it. Your dad's family being healthy doesn't mean the risk isn't real any more than not getting in a car accident proves seatbelts are unnecessary. The science on radon and lung cancer is solid. And fixing it is easy. There's no good reason not to test and mitigate if needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-kids-baby-pregnancy-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Questions from First-Time Parents and New Homeowners", "question": "I'm a new mom and my husband thinks I'm being paranoid about radon. Our level is 4.2 pCi/L. Am I?", "answer": "No. At 4.2 pCi/L you're at the EPA action threshold with an infant in the home. Wanting to fix that is not paranoia - it's responding appropriately to a real measurable concern. The EPA, the CDC, and the Surgeon General all say 4.0 pCi/L warrants action. Your husband's dismissal doesn't change the physics.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Questions from First-Time Parents and New Homeowners", "question": "First baby due in 8 weeks. We're moving into a house that's never been tested for radon. What's the fastest way to know our level?", "answer": "A short-term test kit - deployed for 48 to 96 hours and mailed to the lab - gets you a result within about a week total. That's your fastest reliable route to a number. Pick one up today, put it in the lowest level of the home, and you'll have your answer before the baby arrives with time to act if needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Questions from First-Time Parents and New Homeowners", "question": "My pediatrician asked if our home has been tested for radon. We haven't. What's she getting at?", "answer": "Your pediatrician is doing exactly what she should - taking a health history that includes environmental factors. Radon is the second leading cause of lung cancer in the US and it disproportionately matters in places where kids spend a lot of time. She's flagging it because it's a real risk and because most people don't think about it until someone asks. Take the hint and test your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Questions from First-Time Parents and New Homeowners", "question": "We're new parents and our home has elevated radon. I feel like we've already failed our baby.", "answer": "You found out. You're going to fix it. That's not failure - that's exactly what responsible parents do when they learn something. The parents who fail are the ones who find out and do nothing. You're not in that group. Get the system scheduled, move the baby's sleep space to an upper floor while you wait, and let the fix happen. Then move forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Questions from First-Time Parents and New Homeowners", "question": "I'm a new homeowner and I'm overwhelmed by all the things to maintain. Where does radon fit in priority-wise compared to other things?", "answer": "Test for radon and carbon monoxide before you do most other things. Those are the two invisible killers in a home that have no symptoms and require detection equipment to find. Radon in particular can sit at elevated levels for years with no signal at all. It's a one-time test with ongoing follow-up every few years - not a maintenance burden, just an awareness task. Put it near the top.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Questions from First-Time Parents and New Homeowners", "question": "My mother-in-law wants to set up a nursery in her basement for when we visit. Radon has never been tested. Should I say something?", "answer": "Say something politely and directly: \"Before we use the basement as a sleeping space for the baby, can we run a quick radon test? It only takes a few days and I'd feel better knowing the level.\" That's a completely reasonable request. Most people are happy to test once the idea is put to them - they just haven't thought about it. Bring a test kit if you want to make it easy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Questions from First-Time Parents and New Homeowners", "question": "I feel embarrassed that I didn't think to test for radon before we had the baby. All my parent friends are asking if I've tested.", "answer": "There's nothing embarrassing about it - the majority of households in the US have never tested. It's not a standard checklist item in most new parent guides. Now you know it should be. Test your home, fix it if needed, and pass the lesson along to other new parents you know. That's the full cycle of how this kind of knowledge spreads.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Long-Term Thinking and Family Planning", "question": "We want to have more children. Our house tests at 4.7 pCi/L. Should we fix it before we start trying again?", "answer": "Yes, absolutely. If you're planning to raise another child in this home, getting radon fixed before pregnancy is a smart, forward-looking step. You'll enter the pregnancy knowing the air in your home has been addressed. The mitigation process is minimally disruptive and doesn't take long. Get it done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Long-Term Thinking and Family Planning", "question": "My kids will live in this house for at least another 15 years. Does that change how I think about a 3.9 pCi/L level?", "answer": "Yes, it should. Fifteen years of daily exposure at 3.9 pCi/L in a home where kids sleep and spend hours indoors is a meaningful cumulative dose. The EPA's consideration range of 2.0 to 4.0 pCi/L is meant to acknowledge exactly this kind of long-term residential scenario. At 3.9 with fifteen years ahead, I'd mitigate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Long-Term Thinking and Family Planning", "question": "We plan to stay in this house indefinitely and raise our kids here. Radon is 4.1 pCi/L. Should we treat this as a long-term priority?", "answer": "It should be a near-term priority, not a long-term one. \"Long-term\" sometimes translates to \"eventually\" and eventually stretches. You have kids in a 4.1 pCi/L home indefinitely - that's exactly the scenario mitigation was designed for. Schedule it now, get it done, and then it becomes a background maintenance item rather than an ongoing concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Long-Term Thinking and Family Planning", "question": "My kids are 5 and 7. If we mitigate now, how much of their childhood will have been spent with elevated radon?", "answer": "However many years it's been since you moved in or since the level was elevated. That part is in the past. What you're deciding now is how many more years it will be - and you can make that zero. Mitigation reduces future exposure to a confirmed level. The kids will spend the rest of their childhoods in a home where the radon has been addressed. That's meaningful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Long-Term Thinking and Family Planning", "question": "We're thinking about having kids in the next few years. Should we test now or wait until we're closer to having children?", "answer": "Test now. There's no reason to wait, and if the level is elevated, it's affecting you and your spouse in the meantime. Testing now gives you plenty of time to mitigate before children arrive, and you can confirm the level is down well before the house becomes a nursery. Don't postpone it - radon affects everyone in the home, not just future children.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Long-Term Thinking and Family Planning", "question": "My kids are already grown and out of the house. Radon is 5.2 pCi/L. Do I still fix it?", "answer": "Yes - for yourself. Radon risk applies to everyone breathing the air, not just children. Adults accumulate exposure too. At 5.2 pCi/L with you and your spouse in the home, mitigation is still the right call. And your grown kids will probably bring grandchildren to visit someday.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Long-Term Thinking and Family Planning", "question": "I want to lower the radon as much as possible for my baby, not just get under 4.0 pCi/L. Is that achievable?", "answer": "Most properly installed mitigation systems bring levels well below 4.0 pCi/L - many homes end up below 2.0 pCi/L and some below 1.0 pCi/L after installation. The target isn't just under 4.0; a good contractor will aim to get the level as low as reasonably achievable. After installation, test to see where you landed, and if the number is higher than expected, the system can often be adjusted.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Long-Term Thinking and Family Planning", "question": "My kids will eventually move out. At that point should I stop worrying about radon?", "answer": "Keep the system maintained and retest periodically - it doesn't stop mattering when the kids leave. You're still breathing the air. Radon is a health risk for everyone, and the cumulative exposure you've built up over the years living there is already real. Keep the system running and check the level every few years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Long-Term Thinking and Family Planning", "question": "What's the best thing I can do for my kids' long-term lung health when it comes to radon?", "answer": "Test your home. If it's above 4.0 pCi/L, get it mitigated. Confirm the level dropped with a post-installation test. Retest every few years to make sure the system is holding. That sequence - test, mitigate if needed, verify, monitor - is the complete picture. It's manageable and it's effective.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Long-Term Thinking and Family Planning", "question": "My family lives in an area known for high radon. My neighbor tested at 9.0 pCi/L. We haven't tested yet. Should I be bracing for bad news?", "answer": "You should be motivated to test quickly, not bracing for anything. Your neighbor's 9.0 pCi/L doesn't tell you what your home has - geology varies even within a neighborhood. You could be higher, lower, or similar. Test and find out. Living in a known radon-prone area means testing should have been done early and should be treated as non-optional.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My baby is adopted and came from a country where radon levels are poorly documented. Should I do anything different medically?", "answer": "Radon exposure from their home country is essentially unknowable at this point, and there's no medical test for past radon exposure. Focus on what you can control now: test your current home and address it if needed. Your pediatrician can help you think through other aspects of your child's health history, but radon exposure in an unknown past setting isn't something medicine can specifically address.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My baby was born prematurely and spent time in the NICU. Her lungs are more sensitive. Is radon riskier for her?", "answer": "There isn't specific research on radon risk in premature infants, but a child with already-stressed lungs is a child where you'd want to minimize every additional lung stressor you can control. Radon is one you can control. If your home has elevated radon, addressing it is a particularly clear priority given her respiratory history. Talk to her neonatologist or pediatric pulmonologist if you want medical guidance specific to her situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My toddler had RSV last year and has had respiratory issues since. Does radon exposure complicate that?", "answer": "Radon doesn't cause acute respiratory symptoms or worsen viral respiratory illnesses in the short term. It's a long-term lung cancer risk through accumulated radiation exposure. Even so, a toddler with a history of serious respiratory illness is one where you want the best possible indoor air quality going forward. If your home has elevated radon, get it addressed - not as a fix for the RSV complications, but as a long-term harm-reduction measure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "We have a sump pump in our basement. Someone said that can increase radon. My baby's crib is in the basement.", "answer": "Sump pump pits are a common radon entry point - the opening provides a direct path from below the slab to the basement air. If your sump pit doesn't have a cover with a sealed lid, that's worth addressing as part of a mitigation approach. But the crib being in the basement at any radon level is the more urgent issue. Test the level if you haven't, and if it's elevated, get mitigation done. The contractor can assess the sump pit as part of the system design.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "Our home has a crawl space under part of it and a full basement under the rest. We have kids in both areas. How does that affect radon testing?", "answer": "Crawl spaces are also radon entry points - they're just a different foundation type. You'd want to test both areas and discuss both with your mitigation contractor. Crawl space radon control typically involves encapsulation and sub-membrane depressurization, which is somewhat different from sub-slab depressurization in a full basement. A contractor familiar with mixed foundation types can design a system that addresses both.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My son was diagnosed with a rare genetic condition that increases lung cancer risk. Does radon exposure on top of that matter more?", "answer": "It's a reasonable concern. If your child already has an elevated genetic risk for lung cancer, minimizing environmental contributions - including radon - makes sense. Radon adds to whatever baseline risk exists. Talk to his oncologist or genetic counselor about what they recommend for environmental exposures. And if your home has elevated radon, fix it - that's the practical thing to do regardless.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "I have a wood-burning stove in the basement where my kids hang out. Does burning wood affect radon levels?", "answer": "Wood burning affects air quality through particulates and combustion byproducts, but it doesn't generate radon. Radon comes from the soil. However, a wood stove draws air into the firebox and can create negative pressure in the basement, which can actually draw more radon in from the soil as a result. So a wood-burning setup in a basement with elevated radon can compound the situation. Test the level in the basement and address radon directly if it's elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My son is on a sports team that practices in a school basement gym. How do I raise this with the school?", "answer": "Ask the athletic director or school principal whether that space has been tested for radon. Do it in writing - email creates a record. Mention that the EPA recommends testing in schools, especially below-grade spaces. Ask for the most recent test result. If they haven't tested, ask what the timeline for testing will be. Physical activity in an elevated-radon space is higher exposure than rest, so a gym is worth specifically asking about.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My kids are involved in a church basement youth group. The pastor says radon only matters in homes. Is that right?", "answer": "No. Radon can accumulate in any below-grade space - church basements included. Institutional buildings are not exempt from radon exposure. Many states have guidelines or requirements for radon testing in non-residential buildings as well as homes. Your concern is legitimate and the pastor's reassurance isn't based on how radon actually works.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0236", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My cousin is a contractor and he says basement radon fixes itself over time. Is that true?", "answer": "No. Radon levels don't just decrease on their own over time. They fluctuate seasonally and with weather conditions, but a home with an elevated average level will continue to have an elevated average level without intervention. There's no self-correcting mechanism for radon. The only reliable way to bring the level down is active mitigation - a sub-slab depressurization system or similar approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0237", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My baby has been on oxygen support since coming home from the hospital. Is radon exposure any different for her?", "answer": "A baby already requiring respiratory support is one where you want to eliminate every controllable environmental stress on her lungs. Radon doesn't cause acute harm that would show up in the timeframe of her current treatment, but for long-term lung health, minimizing radon exposure is sensible. Test your home immediately and mitigate if elevated. Given her medical situation, I'd also loop in her pulmonologist about indoor air quality broadly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0238", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My daughter is a competitive swimmer and is very focused on lung health. Radon is 4.3 pCi/L at our house. Should I tell her?", "answer": "Yes, and she'll probably want to know. A competitive athlete focused on lung health understands cumulative risk better than most. At 4.3 pCi/L you're over the action level - tell her, get mitigation scheduled, and involve her in the retest process if she's interested. This is exactly the kind of thing an athlete who cares about her body would want to know about and act on.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0239", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My kids have bad seasonal allergies. Someone told me radon can make allergies worse. Is that true?", "answer": "Radon is not an allergen and it doesn't trigger or worsen allergic responses. Allergies are immune responses to proteins - pollen, dust mites, pet dander. Radon doesn't have a protein structure and doesn't cause immune responses. Whatever is driving your kids' seasonal allergies, it isn't radon. Even so, radon at elevated levels is worth fixing for the long-term lung cancer risk, which is a separate concern entirely.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0240", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "Can a baby smell or detect radon in any way? Would they be more fussy or uncomfortable if the level is high?", "answer": "No. Radon is completely odorless and has no taste, and its effects on the body don't produce any sensation at any level short of the damage accumulated over decades. A baby cannot detect it and would not be more fussy or uncomfortable due to radon. Behavioral changes in infants have many possible causes - sleep, hunger, discomfort, illness - but radon is not one of them.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0241", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "We have a radon mitigation system. Our baby monitor is right next to the pipe. Is that okay?", "answer": "The pipe itself doesn't emit anything harmful - it's simply a PVC pipe with a fan that creates negative pressure under the slab. There's nothing coming out of the indoor portion of the pipe that would affect a baby or a monitor. The exhaust end of the pipe goes outside the home. The indoor components are inert and don't pose any concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0242", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My baby's swing is in the basement. Radon is 3.6 pCi/L. Should I move it upstairs?", "answer": "At 3.6 pCi/L you're in the EPA's consideration range. If the basement is where your baby spends significant time - in the swing, on a play mat, being held - those hours add up over months. I'd move the swing to an upper floor, especially for sleep swings where the baby may be for extended stretches. And seriously consider mitigation given the regular use of that space with a baby.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0243", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My kids' indoor sandbox is in the basement. They play in it for hours. Radon is 4.5 pCi/L.", "answer": "At 4.5 pCi/L with kids spending significant daily time in that basement, mitigation is the right call. A play setup like an indoor sandbox means those kids are likely lying down or sitting low to the floor for extended periods - high-contact time with the space. Redirect the sandbox to an upper area while you arrange the fix, and get the system in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0244", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "We finished our basement specifically to give the kids more space and now radon is 5.0 pCi/L. We spent a lot of money on the renovation. I feel sick about this.", "answer": "That's genuinely frustrating, and I understand. But the radon level doesn't cancel out the renovation - it's a separate problem with a separate fix. The finished basement is still a great space. A mitigation system can be integrated into a finished basement, though it requires some planning for how the pipe routes. Get a mitigation contractor to assess what's needed given the finished condition, and then that beautiful basement becomes a properly addressed one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0245", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "I tested the air quality in my baby's room and it showed everything was fine except there was a spike in particulates. Could that be radon?", "answer": "No. Radon is a gas, not a particulate. It doesn't register on particulate sensors. What a spike in particulates might reflect is dust, cooking, a candle, a humidifier issue, or outdoor air coming in. Radon requires its own specific test - a charcoal canister, electret ion chamber, or continuous radon monitor. Standard air quality sensors don't measure it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0246", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My children's bedroom is directly over the utility room where the sump pump is. Radon is 4.4 pCi/L. Is there extra risk there?", "answer": "The sump pit is a common radon entry point, and a room directly above an open or poorly sealed sump pit can receive additional radon that migrates upward. At 4.4 pCi/L overall, mitigation is the right call regardless. As part of the mitigation, a contractor should look at the sump pit - an unsealed pit can be addressed with a sump pit cover that integrates into the system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0247", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My baby's changing table is in the basement. I spend 10-15 minutes a few times a day down there. Is that concerning at 4.6 pCi/L?", "answer": "Brief, infrequent visits to a 4.6 pCi/L basement are low total exposure compared to sleeping there or spending hours there daily. But \"brief visits\" for diaper changes may be underestimating your actual time down there, and the baby is also there during each of those visits. More practically, at 4.6 pCi/L you should be mitigating regardless - the changing table location is a secondary detail.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0248", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My toddler takes a nap downstairs every day. Our radon is 3.5 pCi/L. Is a daily nap a meaningful exposure?", "answer": "A daily nap - roughly one to two hours - adds up over weeks, months, and years. At 3.5 pCi/L you're in the consideration range, and a daily nap is a consistent exposure event. For a toddler who will be in this home for many years, I'd seriously consider mitigation at 3.5 pCi/L given that daily nap habit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0249", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My son is starting to sleep better but only in the basement where it's cool and quiet. Radon is 5.3 pCi/L. I need him to sleep but not at this cost. What do I do?", "answer": "Get a white noise machine and a blackout curtain for a room upstairs, and schedule mitigation immediately. I know \"he finally sleeps here\" feels like a trade-off, but at 5.3 pCi/L in a sleeping space the math is pretty clear - you need to fix the basement and help him sleep upstairs. Babies often adapt to new sleep environments faster than parents expect, especially with the right conditions. Don't let sleep anxiety delay addressing 5.3 pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0250", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My daughter is 16 and about to go to college. Our radon is 4.8 pCi/L. Should I still fix it before she leaves?", "answer": "Yes. You'll still be in the home. So will any other family members. She'll come home on breaks. And a 16-year-old has been in a 4.8 pCi/L home for sixteen years - the years she'll spend here going forward, while fewer, still matter. Fix it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0251", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My nephew stays with us two weekends a month in our basement guest room. Radon is 5.2 pCi/L. Should his parents know?", "answer": "Yes. Two weekends a month over a year is around 48 nights of exposure in a 5.2 pCi/L basement bedroom - meaningful cumulative exposure. Tell his parents what you found and what you're doing about it. You don't need to alarm them, but they deserve the information. And get the system installed so future visits happen in a properly addressed space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0252", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My toddler loves climbing into the sump pit area of our basement. Radon is 4.2 pCi/L. Is there a specific danger near the sump?", "answer": "Keep the toddler out of the sump pit area for standard safety reasons - it's a fall hazard and an electrical hazard - but the radon concern is the same throughout the basement, not specifically elevated at the sump pit opening from a standpoint of how close a child stands. The sump pit matters as a radon entry point that a contractor can address, not as a spot where standing nearby is uniquely dangerous.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0253", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "I'm a pediatric occupational therapist and I'm concerned about radon in the clinic basement where we do therapy sessions with kids. How do I raise this appropriately?", "answer": "Raise it in writing to your clinic director and cite the EPA action level of 4.0 pCi/L. Request that the space be tested with a certified test if it hasn't been recently. If the result comes back elevated, mitigation is the appropriate next step. You're in a professional position to advocate for the children in your care on an environmental health issue, and this is exactly the kind of thing occupational health and safety frameworks exist to address.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0254", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "Can I use a short-term test kit in the room where my baby actually sleeps, not just the basement?", "answer": "Yes, and that's a good instinct. Place the test kit in the room where the baby spends the most time sleeping. Follow the test kit instructions - closed-house conditions, placed at least 20 inches off the floor, away from drafts. The result will tell you what your baby is actually breathing in that space, which is more directly relevant than the basement level alone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0255", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My toddler runs around the basement with his mouth open constantly. Does radon exposure increase when you're breathing harder?", "answer": "Activity does increase breathing rate, which means more air inhaled per minute, which means more radon decay products entering the lungs per unit of time. A running, active toddler in a basement may take in more radon per hour than an adult sitting still in the same space. This isn't a reason to stop letting kids be kids, but it is a reason to take elevated basement levels seriously and address them.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0256", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "My daughter is 8 months old and we have her on a strict sleep schedule in the basement. Radon is 4.6 pCi/L. The consistency feels critical right now but so does this. How do I balance this?", "answer": "Move the sleep schedule to an upper floor room with similar conditions - same temperature control, white noise, blackout curtains. Babies are more adaptable than we often give them credit for, and a few nights of adjustment is worth not having her in a 4.6 pCi/L sleeping space. Get mitigation scheduled immediately. Once it's done and confirmed, you can decide where she sleeps with good information.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-kids-baby-pregnancy-0257", "phase": "phase3", "type": "answered_qna", "topic": "workflow-kids-baby-pregnancy", "category": "workflow-kids-baby-pregnancy", "subtopic": "Edge Cases and Less Common Questions", "question": "I feel like every time I look something up about my baby's health I find something new to worry about. Where does radon fit on the list of real versus overhyped concerns?", "answer": "Radon is real and it's not overhyped - it's the second leading cause of lung cancer in the US and it's completely invisible without testing. But it's also one of the most manageable items on that list. You test once, you fix it if needed, and then it's handled. It doesn't require ongoing vigilance the way some concerns do. Test your home, act on the result, and let that be a closed item. That's different from the open-ended worries that keep you up at night.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "workflow-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "Airthings vs RadonEye - which one should I actually buy?", "answer": "It depends on what you want out of it. RadonEye updates its reading much more frequently - roughly every ten minutes - so if you want to watch levels shift in near real-time, it's the faster option. Airthings integrates well into a broader air quality dashboard and has a more polished app ecosystem. For pure radon focus with quick feedback, most people who care about accuracy and speed lean toward RadonEye. Both are solid consumer-grade devices.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "My neighbor has an Airthings and my coworker swears by RadonEye - are they even in the same class?", "answer": "They're both legitimate continuous radon monitors, yes. The main practical difference is update frequency and what else the device measures. RadonEye is laser-focused on radon and updates faster. Airthings devices often bundle in other sensors like CO2, humidity, and VOCs. If radon is your only concern, RadonEye's faster reporting is a genuine advantage.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "Is RadonEye more accurate than Airthings?", "answer": "Both use ionization chamber technology, and accuracy between the two is close enough that it's not the deciding factor for a homeowner. RadonEye's faster update cycle means you see changes quicker, which some people interpret as more accurate - but what it really is, is more responsive. For the purpose of knowing whether your home is above 4 pCi/L, either one does the job.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "I keep seeing people online saying RadonEye is better than Airthings - is that actually true or just hype?", "answer": "There's a real reason people say it: RadonEye updates its readings more frequently, so it reacts to changes faster. In testing by radon professionals and hobbyists, RadonEye tends to track fluctuations more responsively. Even so, Airthings isn't junk - it's a well-built device with a better app for people who want historical trends and multi-sensor data. \"Better\" really depends on whether you want speed or ecosystem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "Does Airthings or RadonEye have a better app?", "answer": "Airthings has a more polished app with long-term graphing, historical data, and a cleaner interface. RadonEye's app is functional and gets the job done, but it's more basic. If you care about seeing months of trend data in a nice visual format, Airthings wins the app comparison. If you mostly want to check current levels quickly, RadonEye's app is fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "I'm not tech savvy at all. Is Airthings or RadonEye easier for me to use?", "answer": "Both pair via Bluetooth to a smartphone, so there's some tech involved either way. Airthings has the more beginner-friendly onboarding experience and a cleaner app interface. RadonEye is straightforward too, but the app is more utilitarian. If you don't have a smartphone at all, neither one is the right fit - there are standalone display monitors that don't need an app.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "Which one is better for long-term monitoring - Airthings or RadonEye?", "answer": "For long-term trend tracking with a nice visual history, Airthings is the stronger choice. The app retains data well and lets you see patterns over months. RadonEye is better for near-real-time monitoring - it's quick to show changes. For a homeowner who wants to set it and check back occasionally, Airthings is comfortable to live with long-term.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "Does RadonEye or Airthings connect to home automation systems like Google Home or Alexa?", "answer": "Airthings has integrations with some smart home platforms and has IFTTT support on certain models. RadonEye is more self-contained and doesn't plug into those ecosystems as readily. If you want radon data to flow into a home dashboard or trigger automations, Airthings is the better starting point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "I bought an Airthings Wave Plus and my contractor has a RadonEye - can I trust both readings?", "answer": "Yes, both are credible devices. The Wave Plus is Airthings' multi-sensor model and uses a solid detection method. If both are reading in a similar range, that's reassuring. If they diverge significantly, placement and where they've been sitting in the room can explain a lot - radon levels vary by location and time of day. Give both devices time to stabilize before drawing conclusions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "Which monitor has better customer support - Airthings or RadonEye?", "answer": "Airthings is a larger company with a more established support infrastructure, more online documentation, and a bigger user community for troubleshooting. RadonEye is manufactured by FS2you (a Korean company) and support can be slower to reach if you have issues. If that matters to you, Airthings has the edge there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "My husband wants to buy RadonEye but I want to just get an Airthings because it's on Amazon - does it matter which one we order?", "answer": "Honestly, either one will give you a reasonable picture of what's happening in your home. Airthings is widely available and easy to return if needed. RadonEye is also available through Amazon and similar retailers. You won't make a bad decision either way - just pick one, put it in the lowest level of your home, and give it a week before reading too much into the numbers.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "Are there any situations where I'd specifically want Airthings over RadonEye?", "answer": "Yes - if you want multi-sensor air quality data (CO2, humidity, temperature, VOCs) in addition to radon, Airthings makes more sense. It's also a better fit if you want long-term data logging, integration with other smart home tools, or if you have multiple family members who want to check the app. RadonEye is more of a dedicated radon instrument.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs RadonEye - General Comparison", "question": "Are there any situations where I'd specifically want RadonEye over Airthings?", "answer": "If your primary goal is watching radon levels change in near real-time - like after opening windows, running a mitigation fan, or during a real estate inspection - RadonEye's faster update cycle is genuinely useful. Professionals who use consumer monitors for quick verification often prefer RadonEye for that reason.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "RadonEye vs Ecosense - Accuracy and Speed", "question": "RadonEye vs Ecosense - what's the real difference?", "answer": "Both are continuous electronic radon monitors aimed at serious users - homeowners who want more than a basic detector. Ecosense (made by Ecosense Inc., a company founded by people from the radon industry) tends to market to professionals and technically minded consumers. RadonEye is fast and widely used. Ecosense has staked a lot of its reputation on detection sensitivity. If you're deep in the weeds on this stuff, Ecosense is worth looking at - but for most homeowners, either is more than sufficient.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "RadonEye vs Ecosense - Accuracy and Speed", "question": "Is Ecosense more accurate than RadonEye?", "answer": "Ecosense has published data suggesting high sensitivity and strong performance in testing. RadonEye has also performed well in independent comparisons. The honest answer is they're both in the upper tier of consumer monitors. \"Accuracy\" at the consumer level also depends on placement, averaging period, and environmental stability - so chasing a half-pCi/L difference between brands matters less than putting the device in the right place for long enough.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "RadonEye vs Ecosense - Accuracy and Speed", "question": "My radon contractor mentioned Ecosense - should I trust that brand?", "answer": "Yes, Ecosense is a credible brand. It was founded by people with deep backgrounds in radon measurement and the devices are taken seriously in the professional community. If a contractor is using or recommending Ecosense, they've likely done their homework.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "RadonEye vs Ecosense - Accuracy and Speed", "question": "Is RadonEye faster at giving readings than Ecosense?", "answer": "RadonEye is well-known for its fast update cycle - roughly every ten minutes on the RD200 model. Ecosense devices also update frequently but the exact refresh interval varies by model. In practice, both respond to changes faster than most competing consumer monitors. For watching levels change in real-time, RadonEye has historically been the benchmark for speed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "RadonEye vs Ecosense - Accuracy and Speed", "question": "I've heard Ecosense uses a different kind of detection technology - is that true?", "answer": "Ecosense has developed detection approaches aimed at improving sensitivity, which is especially useful at lower concentrations. The specifics of their proprietary methods have been presented in technical contexts. What it means practically is the sensor is designed to detect radon reliably even when levels aren't dramatically elevated. This is part of why their devices appeal to more technically focused users.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "RadonEye vs Ecosense - Accuracy and Speed", "question": "Can I trust an Ecosense monitor to tell me if mitigation is working?", "answer": "It's a capable device for that purpose. After mitigation, you want to see levels drop - and a sensitive, frequently updating monitor like Ecosense can show that shift more clearly than a slow-updating device. Give it at least 24-48 hours post-mitigation before drawing firm conclusions, since levels take time to equilibrate after changes to airflow.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "RadonEye vs Ecosense - Accuracy and Speed", "question": "Is Ecosense better for professionals or homeowners?", "answer": "It's used by both. Ecosense has positioned itself to appeal to professionals who need a reliable handheld or continuous monitor, but the consumer-facing products are accessible to homeowners who want a high-quality device. If you're a homeowner who wants the kind of monitor a knowledgeable professional would trust, Ecosense fits that description.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "RadonEye vs Ecosense - Accuracy and Speed", "question": "Which is more expensive - RadonEye or Ecosense?", "answer": "Both are in the mid-to-upper range of consumer monitor pricing - generally more than entry-level devices but less than professional-grade CRMs. Ecosense tends to price at or above RadonEye depending on the model. I won't quote specific prices since they shift, but check current retail listings - both are available through Amazon and specialty retailers.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "RadonEye vs Ecosense - Accuracy and Speed", "question": "If I had to pick just one - RadonEye or Ecosense - for my house, what would you say?", "answer": "For a homeowner who wants one reliable monitor and will check it periodically: RadonEye is the more popular choice with a strong track record and fast readings. If you want the device that radon-focused professionals and technically sophisticated users tend to gravitate toward, Ecosense deserves serious consideration. Either one beats an entry-level detector by a significant margin.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs Ecosense", "question": "Airthings vs Ecosense - I've seen both mentioned online, which one do I go with?", "answer": "They're solving slightly different problems. Airthings is built for the consumer who wants a connected home device - clean app, multi-sensor data, good-looking hardware. Ecosense is built for people who want maximum confidence in radon detection specifically. If radon measurement quality is your top priority, Ecosense has an edge in detection sensitivity. If you want an easy, all-in-one air quality experience, Airthings is the easier package.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs Ecosense", "question": "Does Airthings or Ecosense work better without a smartphone?", "answer": "Neither is ideal without a smartphone - both lean on app connectivity as a primary interface. Airthings does have a display on some models (like the View series) that shows current readings without the app. Ecosense's consumer devices generally need the app to access data. If no smartphone is available, look for a standalone display monitor instead.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs Ecosense", "question": "My sister has an Airthings and loves it. Is it actually a good radon monitor or more of a marketing product?", "answer": "It's a legitimate radon monitor. Airthings has invested in sensor technology and has a long track record. The air quality features are genuine, not just filler. Some radon purists prefer devices that focus only on radon, but Airthings is not a novelty - it gives you real, useful data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs Ecosense", "question": "Is Ecosense harder to set up than Airthings?", "answer": "Setup for both involves downloading an app and pairing via Bluetooth. Airthings has the more polished onboarding experience and a larger user community, which means more how-to content online. Ecosense setup is manageable but less hand-held. If you're comfortable with a basic app install and Bluetooth pairing, either is fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Airthings vs Ecosense", "question": "Can I compare Airthings and Ecosense readings side by side?", "answer": "Yes, you can run both simultaneously in the same space. It's actually a useful exercise - if both devices are reading in a similar range over a week or more, you can have more confidence in the number. They log their own data independently. Just be aware that radon levels naturally vary by location in a room, so small differences between them don't necessarily mean one is wrong.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "What is the best radon monitor for a homeowner who just wants to know if their house is safe?", "answer": "For a homeowner who wants a reliable answer without getting deep into the technical weeds, something like an Airthings Wave or RadonEye gives you continuous readings, smartphone access, and enough data to know if you're in trouble. Place it in the lowest livable level, give it a week, and look at the average. If it's consistently near or above 4 pCi/L, that's your signal to call someone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "What's the best radon monitor if I don't have a smartphone at all?", "answer": "Look for a standalone monitor with a built-in LCD or e-ink display that shows current and long-term average readings without requiring any app. The Safety Siren Pro series and some Corentium models fit this description. They're plug-and-play devices - you see the numbers right on the unit. No Bluetooth, no app, no account required.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "My parents are older and don't use smartphones. What radon monitor should I get them?", "answer": "A standalone display monitor is the right call. Something simple that plugs into a wall outlet or runs on batteries and shows the radon level on a screen they can read. Safety Siren Pro is the classic recommendation for this situation - just plug it in, let it run, and read the number. No setup required beyond placing it in the right spot.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "What's the best radon monitor for a basement?", "answer": "Any continuous electronic monitor works well in a basement - it's actually the most straightforward placement scenario. The lowest livable level is where you want it, and a basement fits that perfectly. RadonEye, Airthings Wave, or a Safety Siren Pro all work. Place it at least a foot off the floor and away from exterior walls and windows for the most representative reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "Is there a specific monitor I should use for a crawlspace home?", "answer": "Crawlspace homes are a bit different because the livable floors sit above the crawlspace. In that case, you want the monitor on the lowest livable floor - the first floor, typically - not inside the crawlspace itself. A standard continuous monitor works fine for this. The crawlspace itself isn't somewhere you're breathing air from directly, but radon migrating up from it into your living space is what you're measuring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "We just bought a new construction home - do I need a radon monitor and if so which one?", "answer": "New construction doesn't mean low radon - the ground under any house can produce radon regardless of when it was built. A continuous monitor in the lowest livable level is a smart addition. Airthings or RadonEye are popular choices. If the builder installed radon-resistant features, a monitor lets you confirm they're working the way they should.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "What's the best radon monitor for someone who travels a lot and wants to check levels remotely?", "answer": "You want a Wi-Fi connected monitor so data syncs to the cloud and you can check it from anywhere. Airthings makes several Wi-Fi models. RadonEye also has a model with Wi-Fi connectivity (the RD200P) that allows remote access. A Bluetooth-only monitor requires your phone to be nearby to sync - not useful if you're out of town.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "I want to monitor radon in my office - is a home monitor good enough or do I need something else?", "answer": "A home consumer monitor works for getting a general sense of radon levels in an office space. If this is for occupational compliance or workplace safety regulations, you'd need to involve a certified professional who uses certified equipment. But for your own awareness, a quality consumer monitor gives you a reasonable read on the situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "Best radon monitor for a rental property I manage?", "answer": "A standalone display monitor that doesn't require a tenant to have an app or account is the most practical. Safety Siren Pro series devices are popular for this use case - they're durable, simple, and don't require ongoing tech management. Alternatively, a Wi-Fi monitor lets you check remotely without relying on tenants to report back.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "I have a finished basement where my kids play - what radon monitor should I put down there?", "answer": "Any solid continuous monitor is appropriate. Given it's a space your kids use regularly, you want something that gives you an ongoing picture rather than a one-time snapshot. RadonEye, Airthings, or a Safety Siren Pro all work. Place it at the breathing-zone height - roughly 3 to 6 feet off the floor - in a typical spot in the room, and leave it there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "What radon monitor would you use in your own house?", "answer": "Personally, the devices that get the most respect from knowledgeable people in the radon field are RadonEye for fast, focused monitoring and Ecosense for high-sensitivity detection. Airthings is a comfortable everyday choice for a homeowner who wants a full air quality picture. Any of these, placed correctly and given time to accumulate data, gives you useful information.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "Is there a radon monitor that works well in both the basement and upper floors if I want to move it around?", "answer": "Any battery-powered or plug-in consumer monitor can be moved. If you want to monitor multiple floors simultaneously, you'd need multiple units. But for spot-checking different areas, just move one device, give it 24-48 hours to stabilize in the new location, and then read it. RadonEye and Airthings are both easy to relocate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Best Radon Monitor for Different Situations", "question": "My house has a radon mitigation system - do I still need a monitor?", "answer": "Yes, absolutely. A mitigation system is a mechanical device - fans can fail, pipes can get blocked, things change over time. A continuous monitor tells you whether the system is still doing its job. Many mitigation professionals recommend running a monitor permanently after installation for exactly this reason.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Budget and Value - Do I Need to Spend a Lot?", "question": "Do I need an expensive radon monitor or is a cheap one fine?", "answer": "It depends on what \"fine\" means to you. Entry-level monitors can give you a rough idea of whether radon is present, but they tend to update slowly and may not handle low concentrations as reliably. If you're making a real decision about mitigation - spending real money on a contractor and a fan system - you want data you can trust. A mid-range monitor from a reputable brand is a reasonable investment compared to the cost of a mitigation system or, worse, ignoring a real problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Budget and Value - Do I Need to Spend a Lot?", "question": "Is there a radon monitor under a hundred dollars that actually works?", "answer": "Yes, there are credible options in that range. The Safety Siren Pro is a time-tested device that falls in this price band and has been used reliably for years. It won't update as fast as a RadonEye, and it doesn't have an app, but it gives you a long-term average reading that's genuinely useful. For a homeowner who just wants to know their baseline, it's a solid choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Budget and Value - Do I Need to Spend a Lot?", "question": "What's the cheapest radon monitor that is still worth buying?", "answer": "The Safety Siren Pro series is the traditional answer to this question - it's been around long enough to have a track record and it doesn't require a smartphone. If you want app connectivity at a lower price point, entry-level Airthings devices occasionally go on sale. I'd be cautious about very cheap off-brand monitors with no track record or independent validation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Budget and Value - Do I Need to Spend a Lot?", "question": "I saw a radon detector for like twenty dollars on Amazon - is that a scam?", "answer": "Not necessarily a scam, but treat it with serious skepticism. Radon detection is a precision measurement task - the sensor, calibration, and software all matter. An extremely inexpensive device with no brand history, no certifications, and no independent testing data is a gamble. You might get a number, but you have no way to know if it's meaningful. For something you're using to make health decisions, that's not a great situation to be in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Budget and Value - Do I Need to Spend a Lot?", "question": "Are expensive radon monitors worth the money for a regular homeowner?", "answer": "Generally speaking, you don't need to buy the most expensive monitor on the market to get useful data at home. The sweet spot for most homeowners is a mid-range continuous monitor from a reputable brand - it gives you fast, reliable readings without the cost of a professional continuous radon monitor. The premium-tier devices earn their price for professionals doing formal testing, not for a homeowner checking their basement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Budget and Value - Do I Need to Spend a Lot?", "question": "My friend spent a lot on a fancy radon monitor and I'm wondering if I should too or if the cheaper one is basically the same", "answer": "The honest answer is that mid-tier devices from reputable brands have gotten good enough that you get diminishing returns at the top end as a homeowner. If your friend bought a RadonEye or Ecosense at a higher price point, they bought something genuinely capable - it's not wasted money. But if you buy an Airthings Wave or a Safety Siren Pro, you're not flying blind either.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Budget and Value - Do I Need to Spend a Lot?", "question": "Is it worth buying two cheaper monitors instead of one expensive one?", "answer": "That's actually a smart approach. Two monitors in different locations in the house give you more complete information than one does. Radon levels can vary significantly between the basement and first floor, or between different areas of the same level. If budget is a concern, two mid-range monitors covers more ground than one premium device.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Budget and Value - Do I Need to Spend a Lot?", "question": "Does a more expensive radon monitor update faster?", "answer": "Not automatically, but it's often true. RadonEye, which is in the mid-to-upper consumer range, updates every ten minutes on the RD200 model. Cheaper monitors often average over 24 hours or longer before refreshing the displayed reading. If near-real-time data matters to you, that's one of the things you actually get by spending more.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Budget and Value - Do I Need to Spend a Lot?", "question": "I just want a basic yes-or-no on whether my basement has radon - do I really need a fancy monitor for that?", "answer": "If \"yes or no\" is your only question, a short-term test kit (a charcoal canister you send to a lab) might be more appropriate than buying any monitor. It's inexpensive, it gives you a certified lab result, and for a one-time answer it's actually more reliable than a consumer monitor running for just a few days. A continuous monitor is better when you want ongoing visibility, not just a one-time number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Budget and Value - Do I Need to Spend a Lot?", "question": "Can I rent a radon monitor instead of buying one?", "answer": "Some counties, health departments, and radon advocacy organizations offer low-cost or no-cost radon test kits. Renting a professional continuous monitor is less common for homeowners, but some radon professionals will leave a device in place for a test period as part of a paid service. If you just need a one-time answer, a charcoal test kit from a hardware store is probably the most practical and affordable path.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Wi-Fi vs Bluetooth vs Built-In Display", "question": "What's the difference between a Wi-Fi radon monitor and a Bluetooth one?", "answer": "A Wi-Fi monitor connects to your home network and syncs data to the cloud - so you can see your radon levels from anywhere, even when you're not home. A Bluetooth monitor only syncs when your phone is physically close enough to connect, so if you're traveling, you won't see updated readings until you're back in range. For remote monitoring, Wi-Fi is the right choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Wi-Fi vs Bluetooth vs Built-In Display", "question": "Is a Bluetooth radon monitor fine if I'm home most of the time?", "answer": "For most homeowners who are usually home and just want to check the app occasionally, Bluetooth is fine. The device logs data internally and syncs when your phone connects. You won't have real-time remote access, but you'll be able to see your history whenever you're home. The limitation only really matters if you want to check from afar.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Wi-Fi vs Bluetooth vs Built-In Display", "question": "Do I need a Wi-Fi radon monitor or can I get away with Bluetooth?", "answer": "If you're home regularly and don't need to check levels while traveling, Bluetooth works fine. If you have a rental property, a vacation home, or you travel frequently and want to keep an eye on things remotely, Wi-Fi is worth the upgrade. It's a meaningful difference for some use cases and irrelevant for others.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Wi-Fi vs Bluetooth vs Built-In Display", "question": "What's a radon monitor with a built-in display - do those exist?", "answer": "Yes, and they're a great option for people who don't want to deal with an app at all. Devices like the Safety Siren Pro and some Corentium models have LCD screens that show the current reading and a long-term average directly on the unit. You don't need a phone, Bluetooth, or Wi-Fi - you just read the number off the device. They're as simple as it gets.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Wi-Fi vs Bluetooth vs Built-In Display", "question": "My wife doesn't want to download another app. Is there a radon monitor that just shows the reading on a screen?", "answer": "Absolutely - that's actually how a lot of the older and mid-range monitors work. Safety Siren Pro is the classic example: plug it in, it measures, it shows you a number on the display. No app, no account, no Bluetooth. A lot of people prefer this approach for its simplicity.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Wi-Fi vs Bluetooth vs Built-In Display", "question": "Are app-only radon monitors a bad idea?", "answer": "Not a bad idea, just a different trade-off. If you have a smartphone and are comfortable with apps, you get access to graphs, trends, notifications, and sometimes cloud storage of your data. If you don't have a smartphone or prefer not to rely on one, an app-only device isn't the right fit for you. Know which camp you're in before buying.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Wi-Fi vs Bluetooth vs Built-In Display", "question": "If my Wi-Fi goes down, does my radon monitor stop working?", "answer": "Most Wi-Fi monitors continue measuring and logging data locally even when the network is down - they just don't sync to the cloud until connectivity is restored. Once your Wi-Fi comes back, data catches up. The device doesn't stop doing its job just because the internet is unavailable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Wi-Fi vs Bluetooth vs Built-In Display", "question": "Does a radon monitor with a display show real-time readings or just averages?", "answer": "Most display monitors show both: a short-term reading (often updated every hour or so) and a long-term average (accumulated over days or weeks). The short-term number fluctuates more; the long-term average is what you actually use for decision-making. Some display the last 24-hour average and a lifetime average side by side.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Wi-Fi vs Bluetooth vs Built-In Display", "question": "I want to put a radon monitor in a guest room - should I get one with a display or an app-based one?", "answer": "A display monitor makes more sense for a guest room - guests can see the number without needing your app or phone. If you're also monitoring your own basement separately, having the display unit in the guest room and an app-based unit elsewhere means you can manage each one however suits that space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Wi-Fi vs Bluetooth vs Built-In Display", "question": "What happens to the data on my radon monitor if I delete the app?", "answer": "For app-based monitors, data stored only on your phone could be lost if you delete the app without a backup. Monitors that sync to cloud accounts (like Airthings' cloud platform) retain your history even if you uninstall and reinstall the app. Check whether your device uses cloud storage or local-only storage before you assume your data is safe.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Accuracy, Speed, and What Consumer Monitors Can and Can't Do", "question": "Which radon monitor is the most accurate?", "answer": "No consumer monitor is laboratory-grade precise, and any company claiming their consumer device is definitively the most accurate should be viewed with some skepticism. Among the well-regarded consumer options, Ecosense and RadonEye consistently rank well in independent performance comparisons. For the purpose of making a mitigation decision, any of the top-tier consumer monitors gives you information reliable enough to act on.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Accuracy, Speed, and What Consumer Monitors Can and Can't Do", "question": "How accurate is a consumer radon monitor really?", "answer": "Consumer monitors are designed to give you a reasonable indication of radon levels - accurate enough to tell you if you're well above the action level, below it, or borderline. They're not certified measurement instruments for regulatory or real estate testing purposes, and results can vary based on placement, temperature, humidity, and the specific device. Think of them as a continuous awareness tool rather than a certified lab instrument.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Accuracy, Speed, and What Consumer Monitors Can and Can't Do", "question": "Is Ecosense more accurate than Airthings - like can I trust the numbers more?", "answer": "Ecosense has published technical data on its detection sensitivity and has been evaluated in professional contexts. Airthings has also done third-party testing. Both produce reasonable numbers. The practical difference at home-use concentrations is not dramatic enough to override other factors like ease of use, budget, or placement. Either one, placed correctly and given adequate time, gives you actionable data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Accuracy, Speed, and What Consumer Monitors Can and Can't Do", "question": "Why is RadonEye faster than Airthings at updating readings?", "answer": "RadonEye's RD200 model uses a pulse ionization chamber that samples and updates roughly every ten minutes. Most Airthings devices average over longer periods - some update every hour or longer depending on the model. It's a design choice: faster updates are useful for watching levels change in real time but come with more noise in the readings. Longer averaging periods produce smoother, more stable numbers. Neither approach is wrong - they're optimized for different things.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Accuracy, Speed, and What Consumer Monitors Can and Can't Do", "question": "Why do radon monitor readings jump around so much hour to hour?", "answer": "Radon levels are genuinely variable. Atmospheric pressure changes, wind, HVAC cycling, windows opening, and normal diurnal patterns all cause real fluctuations. A monitor showing a big swing isn't necessarily broken - radon levels in a home can legitimately swing several pCi/L over the course of a day. This is why you want to look at averages over days or weeks rather than any single reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Accuracy, Speed, and What Consumer Monitors Can and Can't Do", "question": "My Airthings said 3.2 pCi/L last night and 5.8 pCi/L this morning - is something wrong with it?", "answer": "Probably not. That kind of swing is within the range of normal radon behavior. Overnight, houses close up, pressure changes, and radon accumulates differently than during the day with more ventilation. The number that matters is the long-term average over days and weeks. If the weekly average is hovering around 4 or above, that's worth paying attention to regardless of what any single hourly reading says.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Accuracy, Speed, and What Consumer Monitors Can and Can't Do", "question": "What is the difference between a consumer radon monitor and a professional continuous radon monitor?", "answer": "A professional continuous radon monitor (CRM) is a calibrated, certified instrument that meets specific standards set by organizations like AARST or NRPP. It logs data at defined intervals, produces a tamper-evident report, and is used by licensed testers for real estate transactions and formal assessments. Consumer monitors are not certified for that purpose - they're useful for ongoing home awareness but don't produce a legally recognized test result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Accuracy, Speed, and What Consumer Monitors Can and Can't Do", "question": "Can a consumer radon monitor replace a professional radon test?", "answer": "For personal awareness and ongoing monitoring, yes - it gives you useful information. For purposes that require a certified test result (real estate transactions, certain landlord-tenant situations, school assessments), no - a consumer monitor doesn't meet those requirements. If someone needs an official result, they need a certified tester using certified equipment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Accuracy, Speed, and What Consumer Monitors Can and Can't Do", "question": "Do professionals ever use Airthings or RadonEye during their work?", "answer": "Some do, particularly for quick checks or follow-up visits where they want to see how a mitigation system is performing before committing to a formal re-test. RadonEye is especially popular in the professional community for this purpose. However, when a certified measurement result is needed - like for a real estate transaction - professionals use NRPP or AARST-certified instruments, not consumer monitors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Accuracy, Speed, and What Consumer Monitors Can and Can't Do", "question": "I've seen radon pros carry RadonEye on job sites - is it a professional-grade tool?", "answer": "It's used by professionals as a field reference tool, not as a certified measurement instrument. It gives a skilled technician fast feedback on whether levels are elevated and how a system is performing. But the formal measurement that goes on a report for a real estate buyer uses a different device with proper certification. RadonEye is a valuable tool in that context - just not a substitute for certified testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Accuracy, Speed, and What Consumer Monitors Can and Can't Do", "question": "Can I use my consumer radon monitor to verify my mitigation system is working?", "answer": "It's useful for this and many professionals actually recommend it for ongoing monitoring post-mitigation. If levels were consistently above 4 pCi/L before mitigation and drop to below 2 pCi/L after, your monitor is telling you something meaningful. Even so, for a formally certified post-mitigation test - like what a buyer might require in a real estate transaction - you'd still want a certified test. For your own peace of mind, your monitor works fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "What is NRPP certification?", "answer": "NRPP stands for the National Radon Proficiency Program - it's one of the main U.S. certification bodies for radon measurement and mitigation professionals. An NRPP-certified tester has met specific training and testing requirements for measuring radon. When you see \"NRPP certified\" on a contractor's credentials, it means they've been trained and tested to a recognized standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "What is AARST?", "answer": "AARST stands for the American Association of Radon Scientists and Technologists. It's the professional organization in the U.S. that develops standards for radon testing and mitigation. AARST and NRPP work together - AARST writes the standards, and NRPP manages the certification process for individuals who meet those standards.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "What is C-NRPP?", "answer": "C-NRPP is the Canadian National Radon Proficiency Program - Canada's equivalent of the U.S. NRPP. If you're in Canada and hiring someone to test or mitigate radon, C-NRPP certification is the credential to look for.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "Do consumer radon monitors meet AARST or NRPP standards?", "answer": "Consumer monitors do not meet the standards required for certified radon measurement under AARST/NRPP protocols. Those standards require specific device calibration, tamper evidence, defined deployment conditions, and chain of custody. Consumer devices don't go through that process. They're valuable for home monitoring but don't produce a result that counts as a \"certified test.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "Is there a radon monitor certified by the EPA?", "answer": "The EPA doesn't directly certify individual radon monitors - instead it works with organizations like NRPP and AARST to set standards. Devices used for certified testing must meet performance criteria defined in those protocols. Consumer monitors haven't gone through that process and therefore aren't \"EPA certified\" for formal testing purposes, even if they're generally reliable for home use.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "What does it mean when a radon monitor says it's been \"third-party tested\"?", "answer": "It typically means the manufacturer sent the device to an independent laboratory and compared its readings to known radon concentrations. This is better than no testing at all, but it's different from meeting NRPP or AARST certification standards. It tells you the device performed reasonably in a controlled setting - useful information, but not the same as formal certification.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "Do I need a certified test or can I just use my monitor?", "answer": "For your own knowledge and peace of mind, your monitor is enough to guide decisions. If you need a result that satisfies another party - a buyer in a real estate transaction, a landlord-tenant requirement, a school or workplace - you need a certified test by a credentialed professional. The two serve different purposes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "My home inspector brought a RadonEye to the inspection - is that a valid test for the real estate transaction?", "answer": "A RadonEye used by a home inspector during a standard home inspection is not the same thing as a certified radon test by a licensed radon measurement professional. Real estate radon tests should be performed by an NRPP or state-licensed radon measurement professional using certified equipment following defined protocols. If the inspector simply checked it with a RadonEye, that's an informal observation - valuable context, but not a substitute for a proper test if one is required for the transaction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "Can I use my consumer radon monitor for a real estate transaction?", "answer": "Not in most cases. Real estate radon tests typically require the involvement of a certified measurement professional using certified equipment, with proper deployment and reporting protocols. A consumer monitor doesn't satisfy those requirements. If the transaction requires a radon test, hire a certified professional - the cost is modest and the result is defensible.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "The buyer of my house is asking for a radon test. Can I just show them my Airthings data from the last six months?", "answer": "The buyer's agent or the buyer's lender may not accept that as a formal test result. Airthings data is useful background, but for a real estate transaction the standard is a certified test by a licensed professional. Even so, your six months of Airthings data is actually more useful context than a 48-hour test - share it as supplemental information while also getting the certified test done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "My neighbor said their radon monitor was \"calibrated\" - what does that mean and do I need to worry about mine?", "answer": "Calibration means comparing a device's readings to a known reference to verify accuracy and adjust if needed. Professional measurement instruments are calibrated on a regular schedule. Consumer monitors are typically calibrated at the factory and may drift over time. Some manufacturers recommend periodic recalibration or replacement after a certain number of years. If your monitor is more than a few years old, it's worth checking the manufacturer's guidance on this.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "How often do radon monitors need to be calibrated?", "answer": "For consumer monitors, manufacturers typically suggest recalibration every one to three years to maintain accuracy. Some offer recalibration services; others suggest replacing the device. Professional CRMs have stricter calibration schedules because they're used for certified testing. Check your specific device's documentation - it's not always obvious, but it matters for long-term reliability.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "Does an Airthings monitor ever need to be recalibrated?", "answer": "Airthings recommends recalibration on a schedule - typically every one to two years depending on the model. They offer a recalibration service for some products. It's worth doing if you're relying on the monitor for ongoing decision-making. An uncalibrated device that's drifted can give you a false sense of security or unnecessary alarm.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Certification, Standards, and What They Mean", "question": "What happens if I never calibrate my radon monitor - will it just start giving wrong numbers?", "answer": "It may drift over time, yes. The ionization chambers in these devices can shift gradually, and without periodic recalibration there's no way to know if the readings are still accurate. For a monitor you bought a year ago, this probably isn't a significant concern yet. For one that's been running for three or four years without any check, it's worth revisiting.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "Do I need more than one radon monitor in my house?", "answer": "If your home has multiple floors you spend significant time on, or a large basement with distinct areas, having more than one monitor gives you a more complete picture. Radon can vary meaningfully between different locations - the basement and the first floor can read very differently. One monitor in the lowest livable level covers the basics; a second unit adds useful context.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "Can I use two different brand monitors at the same time?", "answer": "Yes, you can run an Airthings and a RadonEye simultaneously with no problem. They operate independently and each logs its own data. Running two different monitors in the same space is actually a useful cross-check - if they agree, your confidence goes up. If they diverge significantly over a week or more, that's worth investigating.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "If my two radon monitors disagree with each other, which one do I trust?", "answer": "First, make sure both have been running long enough to stabilize - at least 48-72 hours, and ideally a week. Short-term readings bounce around naturally. If after a week they're consistently reading differently, check whether they're in the same position in the room, at the same height, and not near an HVAC vent or window. If all that is equal and they still disagree by a large margin, consider sending a lab test kit alongside them to get an independent reference point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "My Airthings reads 2.1 pCi/L and my Safety Siren reads 3.8 pCi/L - is one of them broken?", "answer": "Not necessarily. A difference that large is worth investigating, but start with the obvious things: are they in the same location in the room, at similar heights, and away from air currents? Safety Siren reads more slowly and averages over longer periods; Airthings updates faster. Let both run in the exact same spot for at least a week and see if the averages converge. If they still diverge significantly, a lab test kit run alongside both can help you figure out which one is closer to reality.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "Where should I place my radon monitor in the basement?", "answer": "Place it at breathing zone height - about three to six feet off the floor. Keep it away from exterior walls, windows, sump pits, and HVAC vents. You want to measure the air that's actually in the space, not air coming in from outside or air being actively conditioned. A central location in the room is generally ideal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "Should a radon monitor be on the floor or up high?", "answer": "Mid-height is best - roughly three to six feet off the floor. Radon is heavier than air and tends to concentrate lower, but putting the monitor on the floor isn't necessarily more accurate because that's not where people breathe. A shelf, a table, or wall-mounted at head height in the room is the right approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "My radon monitor keeps moving because my kids keep knocking it around. Does that affect accuracy?", "answer": "Moving the monitor disrupts its ongoing measurement and can introduce variability. Try to find a stable, out-of-the-way spot - a shelf, a closet near the space you're measuring, or a wall bracket. Frequent moves reset the equilibration process and make the readings less meaningful. The more stable the placement, the more trustworthy the data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "I just installed my radon monitor - how long before I can trust the readings?", "answer": "Most consumer monitors recommend waiting at least 24-48 hours before drawing any conclusions, and a week or more of data is better for establishing a reliable baseline. The first few hours are usually volatile as the device stabilizes. If you're going to act on the data, look at averages over at least several days rather than any single reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "Can I put a radon monitor in a closet?", "answer": "Air circulation in a closed closet is limited, which means radon can behave differently there than in the open room. For a representative reading, open room placement is better. If you need to keep it out of reach (kids, pets), a high shelf or a secured corner of the room works better than a closed closet.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "Does my radon monitor need Wi-Fi to work at all?", "answer": "No - a monitor continues measuring radon regardless of whether it's connected to Wi-Fi or Bluetooth. Connectivity just determines how you access the data. A monitor without Wi-Fi still logs readings locally. You'll just need to be physically near it (for Bluetooth) or read the display directly (for display models) to see what it's saying.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "Can extreme cold or heat affect my radon monitor readings?", "answer": "Yes, temperature and humidity can affect sensor performance. Most consumer monitors are rated for normal indoor conditions. Placing one in an unheated garage, a very humid crawlspace, or near a heat source can affect readings and potentially damage the sensor over time. Stick to spaces within the device's rated temperature and humidity range.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "Does running the HVAC affect what my radon monitor reads?", "answer": "HVAC cycling does affect radon levels - turning on a system that brings in outside air or pressurizes the house can temporarily lower readings, while a house closed up with the AC on recirculate can see levels rise. This is real, not a sensor artifact. It's another reason to look at averages over many days rather than individual readings tied to specific HVAC states.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Multiple Monitors, Placement, and Practical Questions", "question": "My radon monitor gives a lower reading when the windows are open - is that right?", "answer": "Yes, that's correct. Open windows dilute radon with outside air, which is typically lower in radon. Closed-house conditions represent your normal exposure during winter, sleeping hours, and other times when ventilation is minimal - which is actually the more important scenario to measure. Test under closed-house conditions for the most representative long-term average.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Which Monitor Sends Alerts and Remote Access Features", "question": "Which radon monitor sends me an alert if levels get too high?", "answer": "Both Airthings and RadonEye apps offer alert or notification features when readings cross a threshold you set. Airthings has a more polished notification system. For alerts to reach you when you're not home, you need a Wi-Fi connected model - Bluetooth only syncs when you're nearby, so you won't get a push notification if you're across town.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Which Monitor Sends Alerts and Remote Access Features", "question": "Can a radon monitor text me if the level goes up?", "answer": "Some monitors can send push notifications through their apps when levels exceed a threshold. Airthings supports this through their app. For a text message specifically, you'd need a third-party integration (like IFTTT on certain compatible platforms). Most people find app push notifications sufficient.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Which Monitor Sends Alerts and Remote Access Features", "question": "I want to know right away if my radon spikes while I'm at work - what monitor should I get?", "answer": "A Wi-Fi connected monitor with push notifications is what you want. Airthings makes several Wi-Fi models that send alerts through their app. Make sure your notification settings are configured properly in the app after setup. Keep in mind that radon spikes are often temporary - an alert is useful context, but the long-term average is what drives decisions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Which Monitor Sends Alerts and Remote Access Features", "question": "Which radon monitor lets me check levels on my phone from a different state?", "answer": "Any Wi-Fi connected monitor that syncs to the cloud. Airthings has a cloud-connected platform that lets you view readings remotely through their app. RadonEye's Wi-Fi model (RD200P) also supports remote access. A Bluetooth-only device won't sync when you're out of range.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Which Monitor Sends Alerts and Remote Access Features", "question": "Does Airthings have an alarm that goes off if radon is too high?", "answer": "Airthings devices can be configured to show visual alerts (LED color changes) and send push notifications through the app. They don't typically sound an audible alarm like a smoke detector - the alert is visual and/or app-based. This is appropriate since radon doesn't require the kind of immediate response a smoke or CO detector does - it's a long-term risk, not an acute emergency.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Warranty, Durability, and Long-Term Ownership", "question": "Which radon monitor has the longest warranty?", "answer": "Warranty terms vary by model and change over time, so check current specs before buying. Generally, Airthings offers a two-year limited warranty on most devices. RadonEye and Ecosense warranty terms are similar. None of the major consumer monitor brands stand out dramatically on warranty length - this probably shouldn't be your primary selection criterion.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Warranty, Durability, and Long-Term Ownership", "question": "How long does a radon monitor last before I need to replace it?", "answer": "Most consumer monitors are designed to function for several years. The sensor can degrade over time, which is why manufacturers recommend periodic recalibration. A monitor that's been running reliably for five or more years may still work, but it's worth having it recalibrated or validated against a lab test kit to confirm it's still accurate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Warranty, Durability, and Long-Term Ownership", "question": "My radon monitor is three years old - do I need to replace it?", "answer": "Not necessarily, but it's a good time to verify its accuracy. Run a lab test kit (like an alpha track detector or charcoal canister) alongside the monitor for the required exposure period and compare the results. If they align reasonably well, your monitor is still doing its job. If there's a significant discrepancy, recalibration or replacement is worth considering.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Warranty, Durability, and Long-Term Ownership", "question": "Does the battery ever die on a battery-powered radon monitor?", "answer": "Yes, like any battery-powered device. Battery life varies by model, usage, and display brightness, but most manufacturers rate battery life in the range of many months to a year or more under typical conditions. Check your device's specific rating and set a reminder to swap batteries annually if you don't have automatic low-battery alerts.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Warranty, Durability, and Long-Term Ownership", "question": "What happens to my Airthings data when the device battery dies?", "answer": "Most Airthings devices store data in the cloud when connected via Bluetooth or Wi-Fi, so historical data is preserved in your account even if the device loses power. When you replace the battery and reconnect, your data should still be there. If you've never connected to the app, data stored only on the device may be lost.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Real Estate, Home Sales, and Post-Mitigation Verification", "question": "Which monitor should I use to verify mitigation results after installation?", "answer": "Any continuous monitor with frequent updates is useful here - RadonEye is popular for this because you can watch levels drop in the days following installation. Give the system at least 24 hours to equilibrate before reading much into the numbers, and look at the 48-72 hour average as your initial benchmark. For a formal certified post-mitigation test, hire a certified professional.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Real Estate, Home Sales, and Post-Mitigation Verification", "question": "The real estate agent wants a radon test result before closing. Can I use my RadonEye data?", "answer": "Probably not. Most real estate transactions require a certified radon test performed by a licensed or NRPP-certified professional following defined protocols. Your RadonEye data can be valuable supplemental context, but the formal requirement is typically a certified test. Ask the agent or buyer what documentation they specifically need.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Real Estate, Home Sales, and Post-Mitigation Verification", "question": "I'm selling my house - should I buy a radon monitor or just get a professional test?", "answer": "If you're selling soon, a professional certified test is the right move - it produces the documentation buyers and their agents typically need. A consumer monitor is more useful for long-term personal monitoring. If you're curious about your levels before investing in mitigation, a monitor makes sense. If you need paperwork for a transaction, go straight to the certified test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Real Estate, Home Sales, and Post-Mitigation Verification", "question": "Can my home inspector do the radon test when they do the home inspection?", "answer": "Some home inspectors are also certified radon measurement professionals and use proper equipment - if that's the case, the test is legitimate. Others use a quick check with a consumer device as an informal courtesy, which doesn't produce a certified result. Ask specifically: are they NRPP-certified for radon measurement, and will they provide a certified report? If not, hire a separate radon professional.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Real Estate, Home Sales, and Post-Mitigation Verification", "question": "My home inspector used a RadonEye and said the results were fine - should I trust that?", "answer": "A RadonEye used by a home inspector is an informal observation, not a certified radon measurement. It's useful information, but it doesn't meet the standard for a certified real estate radon test. If you're the buyer and radon matters to you, request a certified test by an NRPP-certified professional. If you're just curious, the inspector's reading is a reasonable starting data point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Real Estate, Home Sales, and Post-Mitigation Verification", "question": "What's the difference between a short-term test kit and a continuous monitor?", "answer": "A short-term test kit - typically a charcoal canister - is deployed for 48-96 hours, then mailed to a lab that analyzes radon captured in the charcoal. It gives you a snapshot reading for that specific period. A continuous monitor runs indefinitely, giving you ongoing data about how levels fluctuate over time. For a real estate transaction, short-term tests are common. For ongoing home monitoring, a continuous monitor is more useful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Real Estate, Home Sales, and Post-Mitigation Verification", "question": "Is a 48-hour charcoal test more accurate than running an Airthings for two months?", "answer": "They measure different things. The charcoal test gives you a certified result for a specific 48-hour period. Two months of Airthings data gives you a trend showing how levels vary with weather, seasons, and ventilation - which is actually more informative in some ways. Neither is strictly \"more accurate\" - they serve different purposes. For decision-making about your family's exposure, the two-month trend is arguably more useful context.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Real Estate, Home Sales, and Post-Mitigation Verification", "question": "Should I trust my neighbor who said they used an alpha track detector for the most accurate test?", "answer": "Alpha track detectors are considered very reliable for long-term radon measurement - they're passive devices that capture radon decay products on a film over 90 days or more, then get lab-analyzed. Many professionals consider them the gold standard for time-averaged residential testing. They're slower than consumer monitors and don't give you real-time readings, but the long-term average they produce is highly reliable. Your neighbor isn't wrong.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Head-to-Head and Edge Case Comparisons", "question": "Airthings vs Safety Siren - which should I buy?", "answer": "Very different devices for different buyers. Airthings is app-connected, gives you multi-sensor data, and provides a modern dashboard experience. Safety Siren is a no-frills plug-in display device that just shows you the number - no app, no smartphone required. If you want simplicity and no tech overhead, Safety Siren is a classic choice. If you want connected features and trend data, Airthings is the upgrade.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Head-to-Head and Edge Case Comparisons", "question": "I already have a Safety Siren and I'm thinking about getting an Airthings too - is it worth having both?", "answer": "Running both simultaneously is a useful exercise - it lets you see whether they agree, which builds confidence in both readings. If they're consistently close over a week or more, you can feel good about your understanding of your home's radon level. If you just want more features and app connectivity, upgrading to Airthings alone is reasonable. You don't need both permanently unless you want the redundancy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Head-to-Head and Edge Case Comparisons", "question": "Is RadonEye overkill for a regular homeowner?", "answer": "Not really - it's a capable, appropriately priced continuous monitor that's well regarded by both homeowners and professionals. \"Overkill\" would be a professional CRM that costs many times more and is designed for certified testing work. RadonEye is in the sweet spot of performance and price for a serious homeowner who wants reliable, fast-updating radon data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Head-to-Head and Edge Case Comparisons", "question": "What radon monitor would a radon mitigation contractor recommend?", "answer": "It varies by contractor. Many professionals have a soft spot for RadonEye because of its fast update cycle - useful for verifying their work in real time. Ecosense is respected in the professional community for its sensitivity. Airthings gets recommended for homeowners who want an easy connected experience. A good contractor will tell you which device they've had good experiences with rather than pushing one brand hard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Head-to-Head and Edge Case Comparisons", "question": "Is there one radon monitor that professionals and homeowners both agree is the best?", "answer": "If there's a consensus, RadonEye gets named most often in conversations among people who are serious about radon monitoring. It's fast, it's been validated in independent tests, and professionals use it as a field reference tool. Even so, \"best\" is always context-dependent - the best monitor for your situation depends on your tech preferences, how you'll use the data, and what else you want to measure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Head-to-Head and Edge Case Comparisons", "question": "My aunt is worried about radon but she doesn't do smartphones at all. What do I get her?", "answer": "A Safety Siren Pro or a similar standalone display monitor is exactly right for this situation. You plug it in, show her the display, explain what numbers to watch for (anything above 4 pCi/L deserves a call to a professional), and she's covered. No app, no account, no Bluetooth, no ongoing tech support needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Head-to-Head and Edge Case Comparisons", "question": "I just found out my area has high radon - do I need a fancier monitor than usual?", "answer": "Not necessarily fancier, but definitely invest in a quality continuous monitor if you don't already have one. In a high-radon area, the stakes of missing an elevated reading are higher, so this isn't the moment to go cheap. A RadonEye, Airthings Wave, or Ecosense gives you a solid baseline. Run it for several weeks before drawing conclusions, and if levels are elevated, contact a state licensed mitigation contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Head-to-Head and Edge Case Comparisons", "question": "I live in Iowa - do I need a specific radon monitor?", "answer": "Iowa is one of the highest-radon states in the country, so a quality continuous monitor is worth having. Any of the well-regarded brands work - there's no Iowa-specific device you need. The bigger point is that Iowa homeowners should take radon seriously, test properly, and mitigate if needed. The monitor helps you stay aware on an ongoing basis.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Head-to-Head and Edge Case Comparisons", "question": "Is there a radon monitor recommended by the EPA?", "answer": "The EPA doesn't endorse or certify specific consumer monitor brands. It does recognize certified testing programs (NRPP, AARST) and recommends using certified professionals for formal testing. The EPA's guidance for consumer monitors is to use devices from reputable manufacturers and follow the instructions for proper placement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Head-to-Head and Edge Case Comparisons", "question": "Can I use a radon monitor to compare levels before and after opening windows?", "answer": "Yes, and it's an interesting real-world experiment. With a fast-updating monitor like RadonEye, you can watch levels change as you open windows and ventilate. You'll typically see levels drop significantly with ventilation. This is useful to understand your home's behavior, though it doesn't mean ventilation is a long-term solution - radon keeps entering, and you can't keep all windows open year-round.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Head-to-Head and Edge Case Comparisons", "question": "What does it mean when my radon monitor shows pCi/L vs Bq/m³ - is one better?", "answer": "They're just different units measuring the same thing. pCi/L (picocuries per liter) is the standard in the United States. Bq/m³ (becquerels per cubic meter) is used in Canada and most of Europe. 1 pCi/L equals roughly 37 Bq/m³. Most U.S. monitors default to pCi/L; some allow you to switch units in the app settings. Neither is more accurate - they're just different scales.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Head-to-Head and Edge Case Comparisons", "question": "My monitor shows WL instead of pCi/L - what does that mean?", "answer": "WL stands for Working Level, an older unit of radon measurement still used in some contexts. 1 WL is approximately equal to 200 pCi/L - so it's a much larger unit. Most modern consumer monitors use pCi/L. If your device shows WL, the numbers will look very small (0.02 WL is roughly 4 pCi/L). Check your device manual to confirm which unit it's displaying and whether you can switch.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "I've been going back and forth for weeks trying to decide on a radon monitor - is it really that complicated?", "answer": "Honestly, no. Pick a reputable brand - RadonEye, Airthings, Ecosense, or Safety Siren - that fits your tech preferences and budget, put it in the lowest level of your home, and give it two weeks. You'll have more useful information than most people ever gather. The paralysis is understandable but the decision isn't as high-stakes as it feels. Any of those devices will tell you if you have a problem worth addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "Is it worth reading all the reviews before buying a radon monitor?", "answer": "A little research is worthwhile, but you can over-do it. The major brands have been reviewed thoroughly enough that you'll find consistent themes: RadonEye is fast and focused, Airthings is connected and multi-sensor, Safety Siren is simple and reliable. Once you understand those three personalities, most reviews just confirm what's already known. Pick based on your needs and buy it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "Are newer radon monitors better than older ones?", "answer": "Generally, yes - sensor technology has improved over time, and newer models tend to update faster and have better app support. But an older model from a reputable brand isn't junk. If someone is selling a five-year-old Safety Siren Pro or Airthings, it's still a useful device - just be aware it may need recalibration and software support may have changed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "Is there a \"best of all worlds\" radon monitor - accurate, fast, has a display, and connects to an app?", "answer": "The RadonEye Plus2 (RD200P) comes close - it updates fast, has some connectivity options, and is well-regarded for accuracy. Airthings' View series has a display and app connectivity. There's no one device that maximizes every feature, but those two are as close as you get in the consumer market. You're going to make trade-offs somewhere.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "My friend says radon monitors are a gimmick and I should just get a test done by a pro - is he right?", "answer": "He's not wrong that a professional certified test is the most defensible result. But a continuous monitor gives you something a one-time professional test doesn't - ongoing awareness. Radon levels change with seasons, HVAC changes, and structural changes to your home. A professional test is a snapshot; a monitor is a movie. Both have value, and they serve different purposes rather than one being a gimmick.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "Is there any radon monitor that also detects other gases like carbon monoxide?", "answer": "Some Airthings devices detect multiple air quality parameters - CO2, VOCs, humidity, temperature - though radon and carbon monoxide aren't typically combined in a single device because CO detection has its own specific requirements. Carbon monoxide detectors are a separate product category with their own certification requirements. Don't rely on a radon monitor to replace a CO detector.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "Should I buy a radon monitor before or after I get a professional test?", "answer": "Either order works, but if you're starting from zero: a professional certified test gives you a reliable baseline. Then you install a continuous monitor to keep ongoing watch. If you already have a monitor and it's showing elevated levels, that's a good prompt to get a certified test done and then call a mitigation contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "I've been quoted very different prices by radon mitigation contractors - can I use my radon monitor to decide which quote is justified?", "answer": "Your monitor data tells you about your radon levels, not about the cost of fixing them. Mitigation costs vary based on your home's foundation type, the complexity of the job, and the contractor's pricing - not the severity of your radon level. A level of 6 pCi/L isn't necessarily more expensive to fix than a level of 8 pCi/L. Use your monitor to confirm the problem exists and to verify the fix worked, but evaluate contractor quotes on their own merits.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "Is it true that some radon monitors are designed to read low on purpose?", "answer": "There's no credible evidence that reputable brand monitors are deliberately calibrated to read low. However, poor sensor quality, improper calibration, or placement issues can cause underreading. This is why buying from a brand with a track record and verifiable testing history matters. If you're paranoid, run a lab test kit alongside your monitor and compare - that'll tell you if something is off.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "I want to buy a radon monitor as a gift for my parents. What should I get them?", "answer": "A Safety Siren Pro is the classic gift for older parents who don't want to deal with apps and technology. If they're tech-comfortable, an Airthings Wave would work well and the app is intuitive enough for most people. Whatever you get, make sure you help set it up and place it correctly - a device sitting in a box doesn't help anyone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "Is there a radon monitor that works well in high-humidity environments like near a sump pump?", "answer": "Humidity can affect sensor performance. Most monitors work best in normal indoor humidity ranges. Near a sump pump or in a particularly damp area of the basement, humidity can be elevated enough to cause issues. If the area is very humid, consider whether you can place the monitor in a slightly drier part of the basement or whether a dehumidifier running nearby would help keep conditions within spec.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "What's the best way to know which radon monitor is actually right for me before I buy?", "answer": "Think through a few questions: Do I want to check from my phone? Do I need it to work without a smartphone? Do I want just radon or other sensors too? Do I want to see levels change quickly or am I fine with daily averages? Do I have a specific budget in mind? Once you know the answers to those, the choice between brands becomes much easier. If you want to talk through it, give us a call and we can help you figure out what makes sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "My doctor told me to keep an eye on radon because I have lung issues. What monitor would you suggest?", "answer": "Radon is a long-term lung-cancer risk. For personal medical concerns, talk with a doctor. If your home has elevated radon, Bill can explain what mitigation would involve.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-monitor-comparisons-buying-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "Does radon cause headaches or fatigue? I've been feeling off since I noticed my monitor reading high.", "answer": "Radon does not cause headaches, fatigue, sore throat, or any acute symptoms - it's a radioactive gas whose risk is cumulative radiation to lung tissue over years, not immediate effects. If you're not feeling well, the radon level in your home is not the cause of your current symptoms. See a doctor for your health concerns. Even so, if your monitor shows elevated levels, taking steps to mitigate is still the right call for long-term health.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "My radon monitor has been reading 4.5 pCi/L for three weeks. Is that a real emergency?", "answer": "It's not an emergency in the way a gas leak or carbon monoxide exposure is - radon is a long-term risk, not an acute one. But 4.5 pCi/L is above the EPA's action level of 4.0 pCi/L, and that's a genuine signal worth acting on. Get a certified test to confirm the number, and if it holds, get a mitigation contractor in. You don't need to panic, but you shouldn't ignore it either.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "My monitor has been reading between 2 and 3 pCi/L - do I need to do anything?", "answer": "The EPA says levels between 2.0 and 4.0 pCi/L are worth considering mitigation - the risk is lower than above 4, but it's not zero. Some people choose to mitigate in this range, especially if they spend a lot of time in the basement or have children. Others decide to monitor and revisit. There's no one right answer - it's a personal risk decision. If you want to talk through the numbers, give us a call and we can help you think it through.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "Should I worry about a reading of 1.2 pCi/L?", "answer": "At 1.2 pCi/L you're below the EPA's consideration threshold of 2.0 pCi/L. The EPA's guidance doesn't call for action at that level. Keep monitoring - levels can vary seasonally - but that reading doesn't indicate a problem that needs immediate attention. Radon isn't \"safe\" at any level, but 1.2 pCi/L is well within the range that most homes and public health guidance treat as low-risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Deeper Buying Decision Questions", "question": "Is there any radon monitor that can tell me the exact health risk from my current levels?", "answer": "No monitor can tell you that - radon risk from a given exposure level depends on how long you're exposed, whether you smoke (smokers face dramatically higher radon-related lung cancer risk), how much time you spend in the affected areas, and other factors. A monitor tells you the concentration; the risk calculation involves a lot more variables. For that conversation, an EPA risk calculator or a public health professional can help put the numbers in context.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Professional-Grade Monitors and When to Upgrade", "question": "What is a professional continuous radon monitor (CRM) and how is it different from what I'd buy at a store?", "answer": "A professional CRM is a laboratory-grade instrument calibrated to meet NRPP/AARST standards for certified measurement. They're used by licensed testers for real estate tests, school measurements, and formal assessments. They cost significantly more than consumer devices, log data on a strict schedule, produce tamper-evident records, and are recalibrated regularly. Consumer monitors like Airthings and RadonEye are not designed or certified for that purpose.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Professional-Grade Monitors and When to Upgrade", "question": "Do I need a professional-grade monitor or is the consumer one fine for my home?", "answer": "For home monitoring purposes, a quality consumer monitor is entirely adequate. You don't need a certified CRM to know whether your basement is elevated or to track whether your mitigation system is performing. Professional instruments exist for situations where the result needs to be legally defensible - real estate tests, regulatory compliance, research. For understanding your own home's radon behavior, consumer monitors do the job well.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Professional-Grade Monitors and When to Upgrade", "question": "Can I buy a professional radon monitor for my own house?", "answer": "You can purchase professional-grade equipment, but it's expensive, requires calibration to maintain accuracy, and doesn't give you anything a quality consumer monitor doesn't for home use purposes. Unless you're planning to do certified testing work or have a specific professional reason, it's not a practical purchase for a homeowner. The money is better spent on a quality consumer monitor plus professional testing when a certified result is needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Professional-Grade Monitors and When to Upgrade", "question": "I keep hearing about the Sun Nuclear 1028 - what is that and should I buy one?", "answer": "Sun Nuclear makes professional-grade continuous radon monitors used by certified testing professionals. The 1028 is a widely used professional CRM. It's designed for certified measurement work and costs accordingly. For a homeowner, it's overkill - you'd be buying a professional instrument when a consumer device gives you everything you need for home monitoring. If you're a professional or aspiring to do certified testing work, that's a different conversation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Professional-Grade Monitors and When to Upgrade", "question": "Are there any consumer monitors that come close to professional-grade accuracy?", "answer": "Ecosense has positioned some of its products at the upper boundary of consumer performance and has been evaluated in professional contexts. RadonEye has also been respected by professionals for its speed and reliability. Neither meets the certification requirements of a CRM, but in terms of raw detection performance, the gap between the best consumer monitors and professional instruments has narrowed considerably.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Professional-Grade Monitors and When to Upgrade", "question": "My mitigation contractor wants to leave a monitor in my house for a week after installation - what will they use?", "answer": "A good contractor will often use either a professional CRM or a well-regarded consumer monitor like RadonEye for a post-mitigation check. Some use their own calibrated professional equipment; others rely on the homeowner's consumer monitor if it's a good one. Either approach gives you a useful read on post-mitigation levels. For a formally certified post-mitigation test, professional equipment is appropriate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Professional-Grade Monitors and When to Upgrade", "question": "Is Ecosense considered professional grade?", "answer": "Ecosense occupies an interesting space - its products are designed with professional-level sensitivity in mind and are used and respected by professionals, but they're consumer-accessible in price and interface. They're not certified CRMs in the regulatory sense, but they're a step above typical consumer monitors in terms of technical rigor. Think of them as professional-leaning consumer devices.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Professional-Grade Monitors and When to Upgrade", "question": "I'm considering becoming a radon measurement professional - what monitor should I start with as a trainee?", "answer": "That's a question for your certification program and your state's radon requirements. NRPP-certified trainers will direct you toward the instruments appropriate for certified testing work in your market. A quality consumer monitor like RadonEye can be a useful learning tool alongside your training, but your formal work will require certified equipment. Start with your certification coursework and follow their equipment guidance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "Bottom line - what radon monitor should I buy?", "answer": "If you want the most thoughtful answer: it depends on your situation. For fast, focused radon monitoring: RadonEye. For connected multi-sensor air quality monitoring: Airthings. For simplicity without any tech: Safety Siren Pro. For maximum detection sensitivity: Ecosense. None of these are bad choices. Pick based on how you'll actually use it, and buy it rather than continuing to research indefinitely.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "I've been going back and forth for weeks - can you just tell me which radon monitor to buy?", "answer": "Sure. If you have a smartphone and want the best combination of speed, reliability, and professional respect: buy a RadonEye RD200. If you want a polished app experience with multi-sensor data: buy an Airthings Wave. If you want zero tech overhead: buy a Safety Siren Pro. All three are solid. Stop researching and start measuring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "Should I buy a radon monitor before I decide whether to get a mitigation system?", "answer": "Absolutely - having your own continuous data gives you much better context for that conversation with a contractor. You'll know whether your levels are borderline, consistently elevated, or highly variable. That context helps you make a better decision about whether mitigation is urgent, worth considering, or can wait. A monitor is a small investment compared to a mitigation system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "My house tested high a few years ago and I got it mitigated. Do I still need a radon monitor?", "answer": "Yes - mitigation systems can lose effectiveness over time. The fan can degrade, sealing can crack, and the soil depressurization dynamics can shift. A continuous monitor tells you whether the system is still performing. Many mitigation professionals specifically recommend ongoing monitoring after installation. It's your early warning system if something changes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "I just moved into a house where the previous owners had a radon monitor - can I just use their device?", "answer": "If they left it behind, you can try it. Check when it was manufactured and whether it's been calibrated recently. If it's more than a few years old without calibration, run a short-term lab test kit alongside it to verify it's still reading accurately. Also make sure it's not still linked to their account if it's an app-based device - you may need to factory reset and set it up under your own account.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "How do I know if the radon monitor I bought is actually working?", "answer": "Most monitors indicate their operational status through the app or a display indicator. If it's been running for 48-72 hours and showing readings, it's almost certainly working. For extra confidence, run a short-term charcoal test kit in the same location and compare the results after the kit comes back from the lab. If the two are in the same ballpark, your monitor is functioning correctly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "I want to buy a radon monitor but I don't want to spend money on something I don't need - how do I know if I need one?", "answer": "You need one if you want ongoing awareness of radon levels in your home and you don't want to rely on periodic one-time tests. If you've never tested your home for radon, you arguably need at minimum a one-time test - either a short-term kit or a continuous monitor. Given that radon is the second leading cause of lung cancer in the U.S. and is invisible and odorless, having some measurement in place is not excessive caution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "Can I get the same information from a one-time test kit as from a monitor?", "answer": "A one-time test kit gives you a result for that specific period - useful, but it's a snapshot. Radon levels change seasonally, with weather patterns, and with changes to your home. A continuous monitor gives you ongoing awareness. They complement each other: a one-time test gives you a certified baseline; a monitor gives you continuous context. Both together is the most complete approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "Is it worth getting both a short-term test and a monitor?", "answer": "Yes - and in many ways that's the ideal setup. Do a certified short-term test to establish a defensible baseline and verify your monitor's accuracy. Then run the monitor continuously for ongoing awareness. If levels change significantly - due to a new HVAC system, a finished basement, seasonal shifts - your monitor will catch it between formal tests.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "I want to buy a radon monitor for my daughter's house as a housewarming gift - is that a good idea?", "answer": "It's a genuinely useful and thoughtful gift. Radon is present in homes across the country, and most people don't think about it until a problem is detected. If you help her set it up and place it correctly in the lowest livable level, she'll have ongoing awareness most homeowners never get. Any of the major consumer monitors makes a practical gift.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "My real estate agent says radon monitors are \"overkill\" for buyers - is that true?", "answer": "With all respect to real estate agents, they're not radon professionals. A continuous monitor is a legitimate and useful tool for any homeowner in a radon-prone area. It's not overkill - it's awareness. The cost of a monitor is modest compared to the cost of not knowing your home's radon level for years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "Do I need to register my radon monitor with the manufacturer?", "answer": "Registration isn't required for the device to work, but it's often worth doing for warranty purposes. Some cloud-connected devices require account creation to use the app at all - Airthings is one example. For standalone display monitors, registration is optional and mostly just gets you on their mailing list.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "What's the first thing I should do after I receive my new radon monitor?", "answer": "Take it out of the box, read the quick-start guide, and install it in the right location - the lowest livable level of your home, away from exterior walls, windows, and vents, at breathing zone height. If it's an app-based device, connect it and make sure data is logging. Then wait a week before drawing any conclusions from the readings. Don't check it every hour - give it time to build up meaningful data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Making the Final Decision", "question": "If I call American Radon Systems, can they help me pick the right radon monitor?", "answer": "Absolutely. If you're trying to figure out which monitor makes sense for your home and your situation, give us a call or send us a message through the website. We work with homeowners on radon questions every day and can help you think through whether a monitor is the right next step or whether you'd be better off starting with a professional certified test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Understanding Monitor Technology and Sensor Types", "question": "What kind of sensor does a radon monitor use - how does it actually detect radon?", "answer": "Most consumer radon monitors use ionization chamber technology. Radon gas enters the chamber and its radioactive decay produces alpha particles that ionize the air, generating a small electrical signal the device measures and converts to a pCi/L reading. Better devices have more sensitive chambers that can detect lower concentrations more reliably. Some manufacturers use variations of this approach with proprietary enhancements to improve sensitivity.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Understanding Monitor Technology and Sensor Types", "question": "What is a pulse ionization chamber and why does it matter for radon monitors?", "answer": "A pulse ionization chamber counts individual alpha particle events rather than measuring a continuous current, which gives it higher sensitivity at low radon concentrations. RadonEye uses this type of chamber, which is part of why it updates fast and performs well at lower levels. It's a meaningful technical advantage over simpler detection methods, especially when trying to distinguish between, say, 1.5 pCi/L and 3.0 pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Understanding Monitor Technology and Sensor Types", "question": "Is a diffusion ionization chamber different from a pulse ionization chamber?", "answer": "Yes. A diffusion-type chamber measures a continuous ionization current averaged over time - which is simpler and adequate at higher concentrations but slower to respond and less precise at low levels. A pulse ionization chamber counts discrete decay events, giving it better sensitivity. The practical difference: pulse chambers like the one in RadonEye pick up changes faster and are more responsive at lower concentrations.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Understanding Monitor Technology and Sensor Types", "question": "My Airthings uses a passive sampling method - what does that mean?", "answer": "Airthings' earlier devices used passive sampling where radon diffuses into a chamber and is measured periodically rather than continuously. It still works, but the update interval is longer and the sensitivity at very low levels is lower than active pulse ionization chambers. Their newer devices have improved on this. If you have an older Airthings model, this is part of why it may update less frequently than RadonEye.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Understanding Monitor Technology and Sensor Types", "question": "Does it matter whether my radon monitor measures radon directly or measures radon decay products?", "answer": "It matters for understanding how the measurement works, but for practical home use purposes both approaches give you a pCi/L reading you can act on. Radon itself is what's in the air; its decay products (polonium, bismuth, lead) are what actually deposit in lung tissue. Some devices measure decay products as a proxy for radon concentration. Either approach, done well, gives you useful data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Understanding Monitor Technology and Sensor Types", "question": "Are there any radon monitors that use completely different technology - not ionization chambers?", "answer": "Some devices have used electrostatic collection methods, where charged decay products are collected on a detector surface. Ecosense has implemented proprietary detection approaches. The underlying physics is similar across methods - radon decays and produces alpha particles - but the engineering of how those are counted differs. For a homeowner, the technology details matter less than whether the device has been independently validated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Understanding Monitor Technology and Sensor Types", "question": "What is the detection limit of a consumer radon monitor?", "answer": "Detection limit is the lowest concentration the device can reliably distinguish from zero. For pulse ionization chamber devices like RadonEye, this is quite low - below 1 pCi/L. For simpler sensors, the detection limit may be higher, which means readings at low concentrations are less reliable. In practice, you care most about reliable readings in the 2-8 pCi/L range where action decisions are made.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Understanding Monitor Technology and Sensor Types", "question": "Why do some monitors only update once a day - is that bad?", "answer": "A 24-hour averaging interval means you get one reading per day rather than watching levels change. It smooths out natural variability, which makes the number more stable but also means you can't watch how levels respond to things like opening windows or running the HVAC. It's not bad for establishing a long-term average, but it limits your ability to use the monitor as a diagnostic tool.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Understanding Monitor Technology and Sensor Types", "question": "What is \"counting statistics\" and why do people mention it when talking about radon monitor accuracy?", "answer": "Counting statistics refers to the natural random variability in detecting individual radioactive decay events. At lower radon concentrations, fewer events occur per unit time, so statistical noise is higher and readings are less precise. This is a fundamental physics limitation - not a flaw in any specific device. It's why you average over longer periods for more reliable readings, and why fast-updating monitors still show significant variability hour to hour.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Understanding Monitor Technology and Sensor Types", "question": "My monitor sometimes shows a reading of 0.0 pCi/L - is that right?", "answer": "At very low concentrations, a short measurement interval may capture zero decay events, which registers as 0.0 pCi/L. This is a counting statistics effect - it doesn't mean there's literally no radon; it means the device didn't catch any events in that window. Look at averages over 24 hours or longer rather than any individual reading. If your long-term average is very low, that's a good sign.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Understanding Monitor Technology and Sensor Types", "question": "Does radon monitor battery type matter - lithium vs alkaline?", "answer": "It can affect performance in cold environments - lithium batteries perform much better at low temperatures. If your monitor is in a cold basement or unheated space, lithium batteries maintain voltage better and will give you more consistent readings. In a climate-controlled indoor space, alkaline batteries work fine and are less expensive.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Understanding Monitor Technology and Sensor Types", "question": "Does a plug-in radon monitor work better than a battery-powered one?", "answer": "Plug-in monitors have a constant power supply, which is reliable and eliminates the battery replacement concern. Battery-powered monitors offer flexibility in placement since you're not constrained by outlet location. Performance-wise, power supply type doesn't inherently affect sensor accuracy - both can be equally capable detectors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Seasonal Variations and What to Expect", "question": "My radon readings are higher in winter than summer - is my monitor broken?", "answer": "No, that's completely normal. In winter, houses are closed up with minimal ventilation, allowing radon to accumulate. In summer, windows and doors open more often, diluting radon with outside air. Atmospheric pressure changes and soil moisture also affect radon entry rates. Seasonal variation of a few pCi/L is typical and your monitor is doing its job by showing it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Seasonal Variations and What to Expect", "question": "I tested in summer and radon was 1.5 pCi/L. My neighbor tested in winter and got 6.2 pCi/L. Is that normal?", "answer": "Those numbers aren't directly comparable because they were measured under very different conditions. Summer testing often produces lower readings due to more ventilation. The EPA recommends testing under closed-house conditions to get a representative picture of your typical exposure. Your neighbor's 6.2 pCi/L in winter is not necessarily higher than your actual year-round average would be.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Seasonal Variations and What to Expect", "question": "What time of year should I pay most attention to my radon monitor?", "answer": "The winter months tend to show your highest levels because the house is closed up and there's less dilution from outdoor ventilation. If you're going to make a mitigation decision based on your monitor, the readings you see in the coldest months of the year are the most important to pay attention to. Summer readings can understate your actual year-round exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Seasonal Variations and What to Expect", "question": "My radon level drops every time there's a big storm. Is my monitor malfunctioning?", "answer": "Weather systems affect radon entry and accumulation significantly. A big storm typically brings a pressure drop that can draw more soil gas into the home, but heavy rain can also temporarily seal the soil surface. Wind changes how the house pressurizes relative to the outside. What you're seeing is real, not a malfunction. These weather-driven swings are exactly why long-term averages matter more than any single reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Seasonal Variations and What to Expect", "question": "Why does my radon monitor read higher at night?", "answer": "Several factors contribute: atmospheric pressure tends to drop at night in many climates, which draws more soil gas in; HVAC systems often run less at night in certain seasons; and sleeping with windows closed reduces ventilation. The diurnal (day-night) cycle is a real and commonly observed pattern in residential radon monitoring. Nothing is wrong with your device.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Seasonal Variations and What to Expect", "question": "Does my HVAC running make radon levels go up or down?", "answer": "It depends on the system. An HVAC that brings in fresh outdoor air tends to dilute radon and lower readings. An HVAC running on recirculate with the house sealed may not change levels much. Some HVAC systems create negative pressure that draws more soil gas in. The relationship is complex and home-specific. Use your monitor to observe what actually happens in your house when the system kicks on.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Seasonal Variations and What to Expect", "question": "Can I use my radon monitor to figure out how radon is getting into my house?", "answer": "To some extent, yes. Moving the monitor to different locations - near the sump pit, near concrete cracks, near a floor drain - and watching readings can point toward entry zones. A fast-updating monitor like RadonEye makes this diagnostic exercise more practical. Even so, confirming and sealing entry points is a job for a mitigation professional who knows what to look for structurally.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Seasonal Variations and What to Expect", "question": "My radon level went way up after we finished our basement - is that expected?", "answer": "Yes, finishing a basement changes airflow patterns, can seal over or open entry points, and changes how the space is used and ventilated. Radon levels often shift after major remodeling. If your monitor shows a meaningful increase after a basement renovation, that's real data worth acting on. Get a certified test done and consult a mitigation contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Seasonal Variations and What to Expect", "question": "We installed new windows and our radon readings dropped - did the windows actually help?", "answer": "Tighter windows reduce infiltration of outdoor air, which could go either way - better sealed means less dilution from outside, but it also means less pressure differential. If your readings dropped, it might be coincidental timing with weather, or the windows may have changed the pressure dynamics in a beneficial way. Correlation isn't causation here. Don't rely on window replacement as a radon strategy - it's not a reliable or recommended mitigation approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Seasonal Variations and What to Expect", "question": "How much do radon levels vary day to day in a typical home?", "answer": "It's common to see swings of two to four pCi/L or more over the course of a day in a home with moderate radon levels. This is normal variability driven by pressure, weather, ventilation, and HVAC. The long-term average over a week or more is what you base decisions on. Short-term spikes are informative but shouldn't be treated as your \"real\" level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Comparing Consumer Monitor Brands Beyond the Big Three", "question": "What brands of radon monitors are there besides Airthings, RadonEye, and Ecosense?", "answer": "Safety Siren (now marketed under various names), Corentium (which Airthings actually acquired), Sun Nuclear (professional-grade), Accustar (test kit, not continuous), and a handful of lesser-known brands. For continuous consumer monitors with a real track record, the field is relatively small - Airthings, RadonEye, Ecosense, and Safety Siren cover most of the credible options.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Comparing Consumer Monitor Brands Beyond the Big Three", "question": "What happened to Corentium - I keep seeing it mentioned but can't find it for sale?", "answer": "Airthings acquired Corentium several years ago. The Corentium devices were rebranded into the Airthings product line. The technology and the team behind Corentium now live inside Airthings. If you have an older Corentium device, it's a legitimate product - just know that Airthings is the same lineage.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Comparing Consumer Monitor Brands Beyond the Big Three", "question": "Is Safety Siren still a good monitor or is it outdated?", "answer": "Safety Siren Pro remains a reliable, no-frills radon monitor. It doesn't have app connectivity or frequent updates, but for a homeowner who wants a simple plug-and-read device, it still does the job. It's not the most technically advanced option, but it's proven over many years of residential use and is widely recommended as an entry-level continuous monitor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Comparing Consumer Monitor Brands Beyond the Big Three", "question": "Is the Corentium Home the same as an Airthings device?", "answer": "Essentially, yes. Airthings acquired Corentium and the Home device became part of their lineup. It's a battery-operated device with a built-in display showing short-term and long-term averages. It doesn't require a smartphone to use, which makes it a good simple option. Airthings still supports these devices under their brand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Comparing Consumer Monitor Brands Beyond the Big Three", "question": "Are there any radon monitors made in the USA?", "answer": "Sun Nuclear's professional-grade monitors are manufactured in the U.S. Most consumer-facing monitors are made in Europe (Airthings is Norwegian) or South Korea (RadonEye is Korean). Ecosense is a U.S.-based company though manufacturing may vary. The country of manufacture doesn't strongly predict quality in this product category.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Comparing Consumer Monitor Brands Beyond the Big Three", "question": "Is there a radon monitor specifically designed for schools or public buildings?", "answer": "Professional monitors and measurement protocols for schools exist and are handled by certified professionals. Consumer monitors aren't appropriate for formal institutional testing. Schools typically need certified measurements, radon programs, and often mitigation work managed by professionals familiar with the specific standards for public buildings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Comparing Consumer Monitor Brands Beyond the Big Three", "question": "Are there any radon monitors that also work as smoke detectors?", "answer": "No mainstream device combines radon and smoke detection. These are fundamentally different sensor types with different regulatory requirements. A smoke detector has life-safety requirements that are completely separate from radon detection standards. Don't try to find one device that covers both - maintain your smoke detectors and your radon monitor as separate systems.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Comparing Consumer Monitor Brands Beyond the Big Three", "question": "What about radon monitors integrated into smart home hubs like SmartThings or Home Assistant?", "answer": "Some Airthings devices can integrate with smart home platforms through IFTTT or direct integrations. Home Assistant has community-built integrations for Airthings and some RadonEye models that allow reading radon data within a home automation system. This is more of an advanced hobbyist use case - if you're already running Home Assistant, it's possible and interesting. If you're not, it's not a reason to start.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Comparing Consumer Monitor Brands Beyond the Big Three", "question": "I saw a radon monitor on Kickstarter - should I trust it?", "answer": "Approach crowdfunded radon monitors with significant caution. Radon detection is a precision measurement problem that benefits enormously from a track record. A Kickstarter product has no established track record, no independent validation, and carries the usual crowdfunding risks of non-delivery or under-performance. Stick with brands that have been on the market long enough to be evaluated by independent testers.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Comparing Consumer Monitor Brands Beyond the Big Three", "question": "What about generic store-brand radon monitors - like a hardware store's house brand?", "answer": "Similar caution applies. If a hardware store sells a house-branded radon detector, ask who manufactured the sensor inside it and whether it's been independently validated. Some store-brand devices are rebranded versions of legitimate OEM products; others are not. Without knowing the underlying sensor quality and calibration history, you're taking a chance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "My monitor shows a short-term reading and a long-term reading - which one matters?", "answer": "The long-term average is what you base decisions on. Short-term readings capture current conditions, which fluctuate significantly. The long-term average smooths out the variability and gives you a reliable picture of your typical exposure. Most monitors build this average over 30 days or more. If the long-term average is near or above 4 pCi/L, that's your signal to act.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "How many days of data do I need before my radon monitor reading is meaningful?", "answer": "At minimum, 48-72 hours for a general indication. A week gives you a much more reliable picture. Two to four weeks starts to give you a genuinely stable long-term average. The EPA recommends at least 48 hours for short-term tests; professionals consider 90+ days ideal for long-term average assessments. More data is always more meaningful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "My Airthings app shows a graph with big swings - should I be worried?", "answer": "Not necessarily - the swings are usually real radon behavior, not a malfunction. Radon levels in a home naturally fluctuate significantly over the course of a day. What you want to watch is whether the overall trend is consistently elevated or whether the swings average out to something below 4 pCi/L. A graph that bobs between 2 and 6 with an average of 3.5 tells a different story than one that bobs between 5 and 9 with an average of 7.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "What does the color coding on my Airthings app mean?", "answer": "Airthings uses a color system: green typically indicates low/acceptable levels, yellow indicates moderate levels worth monitoring, and red indicates elevated levels that warrant action. The thresholds they use are based on EPA guidelines - green below 2, yellow between 2 and 4, red above 4 pCi/L (approximately). These are calibrated to EPA guidance, not arbitrary colors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "Does RadonEye give me a color indicator or just numbers?", "answer": "The RD200 displays numbers and also uses LED colors - green for low, yellow for moderate, red for elevated. The app gives you more detail including a trend graph. For a quick at-a-glance check, the LED status is useful. For understanding trends over time, the app view is more informative.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "My monitor's app shows a weekly trend going up - is that alarming?", "answer": "A rising weekly trend is worth paying attention to, especially if it's been rising for two or three weeks consistently. Natural variability can look like a trend over a short window, so don't panic after three days of rising readings. If the average has genuinely moved upward over two to three weeks, it's worth checking: did anything change in the house (new HVAC mode, seasonal change, basement work)? If not, and levels are approaching or above 4 pCi/L, contact a professional.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "I reset my monitor accidentally - do I lose all my data?", "answer": "For cloud-connected devices like Airthings, historical data stored in the cloud should be preserved even if the local device resets. For devices that store only locally, a factory reset may clear on-device history. If data continuity matters to you, choose a monitor that syncs to a cloud account.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "What should I do when my monitor shows a spike to 15 pCi/L?", "answer": "A single spike that high is unusual and worth investigating. First, check the context: was the house completely closed up after a pressure change? Was there unusual weather? Was the monitor moved? If it's a one-time spike that resolved, it may be a temporary environmental event. If it persists for 24 hours or more, or if the long-term average is elevated, that's a genuine signal to get a certified test and consult a mitigation professional. If you want to talk through the numbers, give us a call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "My monitor has been running for a month and the average is 3.8 pCi/L - is that close enough to 4 pCi/L to do something about?", "answer": "The EPA action level is 4.0 pCi/L, but 3.8 is close enough that most knowledgeable professionals would consider mitigation reasonable. The EPA also says levels between 2 and 4 are worth considering mitigation - the risk is lower but real. At 3.8 pCi/L after a full month of data, a conversation with a mitigation contractor is entirely warranted. Call or text Bill and we can talk through what the numbers mean for your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "My well water has radon - does a radon monitor in my home measure that too?", "answer": "Yes, radon released from well water into the air inside your home will contribute to the airborne radon levels your monitor detects. If you have high radon in well water, you may see elevated levels in rooms where water is used heavily (kitchen, bathrooms) in addition to the basement. This is a separate issue from soil-sourced radon and has its own mitigation solutions (water treatment).", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "Can a radon monitor detect radon in my water?", "answer": "No - air radon monitors measure airborne radon concentration, not dissolved radon in water. Water radon testing requires a separate water sample sent to a certified lab. If you're on a private well and concerned about radon in your water supply, contact a water testing laboratory or your state health department for guidance on water testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "We have a granite countertop - will it affect my radon monitor readings?", "answer": "Granite can emit radon because it naturally contains trace amounts of uranium. Most granite countertops emit negligible amounts in the context of a well-ventilated kitchen. If you're placing a radon monitor directly next to a granite countertop for extended periods, you might see slightly elevated readings specific to that location. Place the monitor in a representative location away from potential point sources for a meaningful whole-house reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "My basement has a dirt floor - will that affect what monitor I should buy?", "answer": "A dirt-floor basement allows radon to enter more readily than a concrete slab. The actual monitor technology that works best is the same - the key difference is that you should expect levels to be higher and potentially more variable than in a slab-foundation home. A quality continuous monitor placed in that space will give you the data you need. Mitigation for dirt-floor basements often involves different techniques, and a professional assessment is worth it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "I have a slab-on-grade house with no basement - where do I put the radon monitor and which one should I get?", "answer": "In a slab-on-grade home, the lowest livable level is the main floor. Place the monitor in a frequently used room on the main floor - a living room or bedroom works well. The same monitor choices apply; there's no special device for slab homes. Radon still enters through slab cracks and penetrations, so monitoring the main level is appropriate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "My house is on a pier and beam foundation - do I need to monitor for radon?", "answer": "Pier and beam foundations often have good underfloor ventilation, which can limit radon accumulation. But radon levels can still be elevated depending on local geology and how the crawlspace is managed. Monitoring the lowest livable level (main floor) is still worthwhile. If the crawlspace is enclosed or has limited ventilation, radon entry into the living space can be significant.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "Can I use a radon monitor in a cabin or vacation home?", "answer": "Yes, and it's worth doing especially if you spend extended periods there. A cabin or vacation home may have higher radon levels because it's often closed up and potentially in a rural area with different geological characteristics. A continuous monitor is useful - or at minimum, run a short-term test kit to get a baseline. Wi-Fi connectivity matters less here if you're physically present during visits.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "Can radon monitors be used outdoors to measure ambient outdoor radon levels?", "answer": "Not effectively - outdoor radon levels are extremely low (typically around 0.4 pCi/L) and consumer monitors aren't designed for outdoor use. They'd be exposed to weather, temperature extremes, and humidity outside their rated ranges. Outdoor ambient radon measurement is handled by specialized equipment used in research contexts, not by consumer monitors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "My house has multiple HVAC zones - does that affect where I should put my monitor?", "answer": "Multiple zones can create different pressure relationships in different parts of the house, which can affect radon distribution. If you have a basement zone and an upper floor zone, they may behave quite differently. The lowest livable level is still the priority for monitoring. If you're concerned about specific rooms or zones, a second monitor is the most direct way to get clarity.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "I'm building a new house - should I ask the builder to install a radon monitor during construction?", "answer": "You can, and it's a reasonable request. More importantly, ask whether the builder is installing radon-resistant new construction (RRNC) features - a gravel bed, polyethylene sheeting, a standpipe, and an exterior-vented rough-in for a future fan. These features are inexpensive to add during construction and dramatically simplify mitigation if it ever becomes necessary. After move-in, add a continuous monitor to confirm performance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "Can I use my radon monitor during a home renovation to see if work is affecting levels?", "answer": "Absolutely - this is a good use of a continuous monitor. Breaking into a concrete slab, disturbing soil, or changing ventilation during renovation can temporarily spike radon levels significantly. Monitoring during and after renovation lets you know when conditions have stabilized. This is especially useful if you're doing basement finishing or adding subfloor heating.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "What should I do if my radon monitor shows a sudden big jump right after a plumber worked on something?", "answer": "Work that opens up pathways into the ground - plumbing penetrations, sump pump work, breaking concrete - can temporarily allow more soil gas entry. Give the house a few days to stabilize after the work, run the monitor, and see whether levels return to previous baselines. If they remain elevated, the work may have created a new entry pathway that needs attention.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "If I have a radon mitigation fan installed, can I watch my radon monitor drop in real time?", "answer": "With a fast-updating monitor like RadonEye, yes - you can often see levels begin to drop within hours of a mitigation system activating. The decline is usually gradual over 24-48 hours as the system depressurizes the soil beneath the slab. It's actually a satisfying real-time confirmation that the system is working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "My mitigation system has been running for two years and my monitor shows levels creeping back up - what does that mean?", "answer": "It likely means something has changed - the fan may be losing power, a pipe connection may have loosened, or a new entry pathway has opened up. Check the fan's performance indicator (most systems have a U-tube manometer showing suction). If the manometer looks normal but levels are rising, have a professional come inspect the system. Don't ignore a rising trend after mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "Can a power outage affect my radon readings?", "answer": "A power outage turns off your mitigation fan if you have one - which means the depressurization stops and radon can rise. A continuous monitor will catch this change when power is restored and the device resets. If you notice elevated readings after a power outage, check that your mitigation fan is running. Battery-powered monitors continue measuring through an outage; plug-in monitors will have a gap in data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "Is it possible for a radon monitor to interfere with other electronic devices in my home?", "answer": "No, consumer radon monitors don't emit signals that interfere with other home electronics. Wi-Fi and Bluetooth devices operate within normal consumer wireless bands and meet FCC requirements. There's no known interference issue with other appliances, medical devices, or electronics.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "I've heard some people test radon in each room of their house - is that useful or overkill?", "answer": "Testing every room is beyond what most homeowners need. The priority is the lowest livable level - that's where exposure is typically highest. Testing a bedroom on an upper floor as an add-on can be useful if someone spends many hours there (like sleeping), but it's supplemental information. One good monitor in the basement or lowest level covers the essential case.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "Should I run my radon monitor in the bedroom if I'm on the first floor and there's no basement?", "answer": "Yes - if the first floor is your lowest livable level and your bedroom is on that floor, monitoring in or near the bedroom is entirely appropriate. You spend roughly a third of your life sleeping, so that room matters for exposure purposes. A first-floor bedroom in a slab-on-grade home is a completely reasonable location for a continuous monitor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "My son's bedroom is in the basement - does that change how I should think about the monitor reading?", "answer": "Yes, significantly. A child spending sleeping hours in the basement has higher exposure to whatever level the monitor is reading. In that situation, I'd be more inclined to mitigate at lower levels than the EPA action threshold, given the cumulative nature of the risk. The EPA's recommended action level is the threshold for a typical adult exposure scenario - having a child sleep in that space regularly is a reason to take even borderline readings seriously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "Can I trust radon monitors sold on Amazon?", "answer": "If the brand is one of the established names - Airthings, RadonEye, Ecosense, Safety Siren - yes, buying on Amazon is fine. Be cautious about third-party sellers offering supposed brand-name products at significantly discounted prices, as counterfeit or uncalibrated units exist. Buying directly from the manufacturer's Amazon store or from major retail chains reduces that risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "What's the return policy like for radon monitors - in case I change my mind?", "answer": "Return policies vary by retailer, not by monitor brand. Most major retailers (Amazon, Home Depot, etc.) offer standard 30-day returns on electronics. Check the specific return window before purchasing. Some specialty radon retailers may have different policies. If a device arrives and seems off right away, don't wait - contact the seller promptly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "I moved into a house that already had a radon monitor installed - is it mine to use or do I need to buy my own?", "answer": "If the previous owners left it behind, it's yours. Before trusting the readings, find out how old it is, what brand it is, and whether it's been calibrated recently. If it's a cloud-connected device still linked to the previous owners' account, they'll need to remove it from their account or you'll need to factory reset it. An older monitor of unknown provenance is worth validating against a lab test kit before relying on it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "How do I know when to replace my radon monitor rather than just recalibrate it?", "answer": "Recalibration is appropriate when the monitor is functioning but may have drifted from its original accuracy. Replacement makes more sense when the device is failing mechanically (display issues, connectivity problems), when manufacturer support has ended for the model, or when it's been more than five years without any calibration and a lab test shows significant divergence. When in doubt, the cost of a new quality monitor is modest compared to the peace of mind it provides.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "Does any radon monitor tell me whether my mitigation system is working without me having to do any interpreting?", "answer": "Some mitigation systems have their own performance indicators (the U-tube manometer). A radon monitor doesn't directly read the mitigation system's performance - it reads the result in the air. Comparing before-and-after levels on your monitor is the most direct way to know whether the system is working. If levels dropped substantially after installation, that's your answer. If they didn't, something is wrong with the system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "I'm looking for a gift for a first-time homebuyer - is a radon monitor a good idea?", "answer": "It's genuinely one of the most practical gifts you can give a new homeowner in a radon-prone region. Most first-time buyers don't think about radon until someone raises it, and an ongoing monitor is more valuable than a one-time test. An Airthings is a nice gift that's easy to set up and has an appealing interface. Safety Siren is the practical, no-fuss choice if you don't know their tech comfort level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "Is there a radon monitor that alerts my phone when I should change the filter?", "answer": "Most consumer radon monitors don't have filters in the traditional sense - they're measuring gas directly with an ionization chamber, not filtering air. Some devices have small mesh screens to keep debris out of the chamber; check your device's manual for any maintenance requirements. No filter-change reminder is typically needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0236", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "If I bought the wrong radon monitor, what do I do?", "answer": "Return it if you're within the return window. If not, you can still use what you have - an imperfect placement or a slower-updating device still gives you useful data. You can also keep using it and add a second, better-suited device alongside it. Getting any continuous monitoring data is better than having none, even if the device isn't your ideal choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0237", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "Can I take my radon monitor when I travel to see if a hotel room has radon?", "answer": "You can, but short-duration readings in unfamiliar spaces are less meaningful. A hotel room needs the same stabilization time as your home - 24-48 hours minimum for a useful reading. A one-night stay gives you essentially random noise. It's an interesting experiment if you stay somewhere for a week or more, but not a practical travel tool for typical trips.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0238", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "My contractor says I don't need a radon monitor if I have a mitigation system - do you agree with that?", "answer": "I'd respectfully disagree. A mitigation system is a mechanical device and can fail - fans burn out, connections loosen, and soil dynamics can change. A continuous monitor is how you know the system is still doing its job. Most mitigation professionals who are being thorough actually recommend ongoing monitoring after installation. It's a small additional investment for continued peace of mind.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0239", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "What's the single most important thing to get right when using a radon monitor?", "answer": "Placement. A monitor sitting in the wrong location - near a window, on an exterior wall, in a closed closet, or on an upper floor when you have a finished basement - gives you data that doesn't represent your actual exposure. Correct placement in the lowest livable level, at breathing zone height, in a central location away from air currents, is the most important factor in getting meaningful readings. Buy a decent monitor and place it well.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0240", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "If my radon level is below 2 pCi/L on my monitor, can I stop worrying about radon entirely?", "answer": "Radon has no completely zero-risk level - any exposure carries some risk, and the risk scales with concentration and duration. But below 2 pCi/L is genuinely low and below the EPA's threshold for even considering action. Most people in that range would reasonably conclude radon isn't a priority issue for their home. Continue monitoring, especially seasonally, to make sure levels don't rise over time. But you don't need to lose sleep over a reading in that range.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0241", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "How to Read and Interpret Monitor Data", "question": "What's the best thing I can do for my radon situation besides buying a monitor?", "answer": "Get a professional certified test to establish a baseline you can trust. If the certified result is above 4 pCi/L, hire a state licensed mitigation contractor. Pair a continuous monitor with that process for ongoing awareness. That combination - certified baseline, professional mitigation if needed, continuous monitoring afterward - is the most complete approach a homeowner can take.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0242", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "I just got my first radon monitor in the mail - what are the most common mistakes people make setting it up?", "answer": "The biggest ones: putting it on the floor instead of at breathing zone height, placing it right next to an exterior wall or window, checking it after only a few hours and getting alarmed by the reading, or putting it in a room that isn't the lowest livable level. Take five minutes to read the placement guidance in the manual before you plug it in - correct placement matters far more than which brand you bought.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0243", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "How do I explain to my spouse why I spent money on a radon monitor?", "answer": "Radon is the second leading cause of lung cancer in the United States after smoking - it causes about 21,000 deaths a year, according to the EPA. It's invisible, odorless, and most homes have never been tested. A radon monitor is one of the more straightforward home health investments you can make. Once you've got the data, the conversation about whether to act becomes much simpler.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0244", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "My radon monitor is finally showing a stable reading after two weeks - now what?", "answer": "Look at the long-term average the device has accumulated. If it's below 2 pCi/L, you're in good shape - keep monitoring and recheck seasonally. Between 2 and 4 pCi/L, the EPA says it's worth considering mitigation, especially if you spend significant time in that level of the home. At 4 pCi/L or above, get a certified professional test to confirm and then contact a mitigation contractor. The monitor has done its job - now you act on what it's telling you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0245", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "Is there a radon monitor specifically for renters - something that doesn't require installation?", "answer": "Any battery-powered or plug-in display monitor works fine for renters since there's no permanent installation involved. The Safety Siren Pro plugs into an outlet and requires nothing else. Airthings battery-powered models sit on a shelf or a bookcase. Nothing you'd need landlord permission for. If you're renting a basement apartment, this is especially worth doing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0246", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "Does a radon monitor need to be positioned level or can it be tilted?", "answer": "Most monitors don't require strict leveling - they're not liquid-based instruments. Place them stably on a surface or mount them to a wall in whatever orientation the manufacturer specifies. Some devices are specifically designed for horizontal surface placement; others can be wall-mounted. Check the manual for your specific model.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0247", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "I've been reading about radon for hours and now I feel overwhelmed. What's the short version of what I actually need to do?", "answer": "Short version: buy a continuous monitor from a reputable brand (RadonEye, Airthings, or Safety Siren are all fine), put it in the lowest level of your home at about waist height, leave it alone for two weeks, then look at the long-term average. Below 2 pCi/L - you're fine, keep monitoring. Between 2 and 4 - consider your options. Above 4 - get a certified test and call a mitigation contractor. That's it. Don't let the noise around brand debates delay you from actually getting started.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0248", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "Can I compare radon monitors by reading the EPA's website?", "answer": "The EPA's website provides guidance on radon testing and mitigation, action levels, and certified program information. It doesn't publish side-by-side comparisons of specific consumer monitor brands. For device comparisons, independent radon testing communities, published technical papers, and knowledgeable radon professionals are better sources than the EPA's consumer guidance pages.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0249", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "What independent sources can I trust for radon monitor comparisons?", "answer": "The Kansas State University radon lab has done comparative testing. The International Radon Project has published data. Some academic and government research programs have evaluated consumer monitors against certified reference instruments. Online communities like the r/radon subreddit have informal but often knowledgeable discussions. Be skeptical of comparisons published by the brands themselves - look for independent evaluation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0250", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "Is it true that some insurance companies care whether you have a radon monitor?", "answer": "Some homeowners insurance companies are beginning to pay attention to radon risk, but it's not yet a standard factor in underwriting the way fire or flood risk is. Having a monitor and documentation of low radon levels probably doesn't change your premium today. Even so, the landscape is shifting - radon awareness in the insurance industry has grown. It's worth asking your agent if you're curious.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0251", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "I saw a radon monitor advertised as \"military grade\" - is that a real thing?", "answer": "\"Military grade\" is a marketing phrase with no standardized meaning in the context of radon monitors. There's no military radon monitor specification that would apply to a consumer product. Treat that kind of language as a red flag for marketing hype rather than a credible technical claim. Stick to devices with actual independent validation data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0252", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "My monitor's app hasn't updated in a while and the company seems inactive - should I be worried about device support?", "answer": "If the app hasn't been updated for a long time and the company seems to have gone quiet, that's worth monitoring. Consumer electronics companies do occasionally exit the market, and when an app becomes unsupported, cloud-connected devices can stop syncing. A display-based monitor that doesn't rely on an app is immune to this problem. If you're concerned about software continuity, Safety Siren and similar display devices aren't dependent on a company's ongoing app development.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0253", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "Is it worth buying an extended warranty on a radon monitor?", "answer": "Generally not - the devices don't have many moving parts and failures tend to happen early (infant mortality) or are sensor-drift issues that show up years in. Standard warranty coverage for the first year or two catches the most common failure modes. Spending significantly on an extended warranty for a radon monitor is probably not the best use of that money.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0254", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "Can I share my radon monitor data with my neighbors to compare notes?", "answer": "You can share readings informally, and it can be interesting context - but don't read too much into comparisons. Radon levels vary house by house based on foundation type, soil contact, ventilation, and construction details. Your neighbor's levels don't predict yours with any reliability. Your own monitor data is the only meaningful data point for your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0255", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "I called a radon contractor and they said they'd do a free test - should I use that instead of buying a monitor?", "answer": "A free test from a contractor is typically a short-term charcoal test - a one-time snapshot. It's a perfectly valid starting point. The difference from a continuous monitor is that a monitor gives you ongoing visibility over seasons and years, while a one-time test gives you one data point. If the contractor's test comes back elevated, you'll probably want ongoing monitoring anyway. If you want both a certified baseline and ongoing visibility, do both.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0256", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "My house is being appraised - will the appraiser look at my radon monitor?", "answer": "Appraisers are not radon specialists and generally don't factor radon monitor readings into an appraisal. Radon is more relevant in the context of a home inspection or a real estate transaction where a certified test is performed. Your monitor data might be informative context you share with a buyer, but the appraiser typically isn't evaluating it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-monitor-comparisons-buying-0257", "phase": "phase3", "type": "answered_qna", "topic": "workflow-monitor-comparisons-buying", "category": "workflow-monitor-comparisons-buying", "subtopic": "Common Questions From First-Time Monitor Buyers", "question": "What question should I actually be asking that I'm not asking about radon monitors?", "answer": "The most overlooked question is: what am I going to do with the data? A monitor is most useful when you have a clear plan. If levels are below 2, you'll keep monitoring. If levels are above 4, you'll get a certified test and call a contractor. If they're in between, you'll decide based on how much time you spend in that space and your personal risk tolerance. Know your decision tree before you buy - it'll make the data much more actionable when you have it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "workflow-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "Do new homes have radon?", "answer": "Yes, they absolutely can. Radon comes from the soil under the foundation, and that soil doesn't care how old or new your house is. A brand-new build sitting on high-radon ground can test just as high as an older one nearby. New construction doesn't automatically mean lower radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "My builder told me the new house is \"radon resistant.\" Does that mean I don't have to worry about it?", "answer": "It means the builder installed features designed to make it easier to reduce radon - not that radon is already controlled. \"Radon resistant\" is a starting point, not a finish line. You still need to test after you move in, and if levels are elevated, you activate or add to that system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "Does new construction mean lower radon levels?", "answer": "Not necessarily. Some new homes test fine, others test high - it really depends on the soil and geology under the specific lot, not the age of the house. The main advantage of new construction is that it's often easier and cheaper to address radon because the builder may have already roughed in a system for you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "My builder says our new home has all the latest materials and tight construction. Shouldn't that mean less radon?", "answer": "Actually, tight construction can work against you with radon. When a house is sealed up well, there's less natural air exchange, which means radon that does enter has fewer ways to escape. A tightly built home isn't immune - it's sometimes worse if the underlying radon source is strong.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "We're buying a new build in a subdivision. Half the neighbors tested high, half tested low. How is that possible?", "answer": "Radon levels can vary a lot lot-to-lot even within the same subdivision. The geology under each specific lot matters - how the soil drains, where natural rock formations sit, local pressure differences under the slab. Two houses side by side can legitimately test at very different levels. That's why testing your specific home is the only way to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "My realtor said new construction homes in Illinois don't need radon testing because they're built to code. Is that right?", "answer": "That's not accurate. Illinois building code doesn't warranty low radon levels, and \"built to code\" doesn't mean tested and confirmed. Illinois is actually in a high-radon zone for much of the state. Testing is how you know what's actually happening in your specific home - code compliance is a separate thing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-new-construction-rrnc-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "The builder said our area has low radon. Should I still test?", "answer": "Yes. \"Low radon area\" is a generalization based on regional geology, not a measurement of your home. Plenty of homes in lower-risk zones test elevated, and the only way to confirm your actual levels is a test. It takes a few days and isn't expensive - don't skip it based on regional averages.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "We just closed on a new construction home. When should we test for radon?", "answer": "As soon as you can get into closed-house conditions - which typically means windows closed, HVAC running normally, living in the home or at least having it in occupied mode for 24-48 hours before and during the test. Many people test in the first few weeks of move-in. The sooner you know, the sooner you can act if needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "Is radon testing different for a brand new house vs an older one?", "answer": "The test itself works the same way. The main difference is that new homes with RRNC features may have specific recommendations about whether the passive system should be running or not during the test. Ask your radon professional or check with the builder about what configuration the system should be in when you test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "My new home is still under construction. Can I test now to get an early read?", "answer": "You can, but the results won't be very meaningful until the home is complete, closed up, and in occupied-like conditions. An unfinished home with open doors, no HVAC running, and construction traffic doesn't reflect what you'll actually experience living there. Wait until it's done and then test in normal living conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "Builder offered to test before closing. Is that test trustworthy?", "answer": "A pre-closing test can give you useful information, but make sure it was done under closed-house conditions and done by an independent party - not just the builder's crew. Ideally, you'd have your own test done or hire an independent tester. Some builders are completely above-board about this; others have a conflict of interest.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "My new home has radon at 2.8 pCi/L. The builder says that's fine. Is it?", "answer": "The EPA says levels between 2.0 and 4.0 pCi/L are worth considering mitigation - the risk is lower than above 4.0, but it's not zero. Whether 2.8 is something you want to address is a personal decision. If the home already has a passive RRNC stub-out, adding a fan is usually straightforward and can bring that number down further.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "Should I insist on a radon test contingency when buying new construction?", "answer": "That's a smart move. A radon test contingency gives you a clear path to mitigation or renegotiation if levels come back high. Not all builders will agree to it, but it's worth asking. At minimum, know what you're walking into before you close.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "I bought a new home two years ago and just tested for the first time. It came back at 6.2 pCi/L. Is that normal to find this late?", "answer": "It's not unusual to discover this after the fact - a lot of people don't test until something prompts them to. The important thing is you have the number now. At 6.2 pCi/L, the EPA recommends fixing it, and the fix is very doable. Give us a call and we'll walk through what a mitigation system looks like for your house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "Does building a new home in a different part of the county mean I'm safe from radon?", "answer": "Radon risk varies by specific location, not just by general region. Moving to a different part of the county might mean higher or lower risk - you'd need to test to know. Don't assume geography protects you without actually measuring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "My builder says they've built hundreds of homes and none have had radon problems. Should I trust that?", "answer": "That's likely well-intentioned, but builders aren't always doing systematic post-occupancy radon testing on all their homes, so the statement may not be based on solid data. You can appreciate the track record while still testing your own home - they're not mutually exclusive.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "Is there a best season to first test a new home for radon?", "answer": "Winter is often considered the most revealing time to test because homes are closed up more and the temperature differential between indoors and outdoors tends to draw more soil gas in. Even so, testing any time under closed-house conditions gives you useful information. If your home will be ready in summer, don't wait until winter - test when you can.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "We're having a new home built and want to make sure radon is handled. What should we ask the builder?", "answer": "Ask whether they're including RRNC features and which ones - specifically the sub-slab depressurization layer, the vertical pipe chase, and a stub-out in the attic or outside. Ask whether it's passive or active. Ask if they'll do a test after completion. And plan to do your own independent test after you move in to confirm the numbers.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "New Homes and Radon - General", "question": "My builder included radon features as a \"standard\" upgrade. Does that mean Illinois required it?", "answer": "Illinois doesn't universally require RRNC statewide, but many builders include it as a standard feature or because the local jurisdiction requires it, or simply because it's become industry best practice. Either way, the presence of those features is good - just remember to test and confirm they're actually keeping levels down.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "What is RRNC?", "answer": "RRNC stands for Radon-Resistant New Construction. It's a set of features built into a home during construction specifically to reduce the entry and buildup of radon. The core idea is to make it easier - and cheaper - to manage radon before the home is finished rather than having to retrofit everything later.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "What does RRNC actually include? What are the components?", "answer": "The standard RRNC system has a few main pieces: a gas-permeable layer under the slab (gravel or aggregate) so air and radon can move freely below the concrete, a heavy plastic sheeting vapor barrier over that layer, a pipe that runs from below the slab up through the home and out through the roof or walls, and an electrical junction box near the pipe in case a fan needs to be added later. Some builders also seal floor-to-wall joints and other openings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "My builder says they installed \"radon-resistant features.\" What exactly should I ask to verify?", "answer": "Ask them to walk you through specifically what was installed: Is there a gas-permeable layer under the slab? Was a vapor barrier installed? Is there a vertical pipe from below the slab through the house and out the roof? Is there an electrical outlet near the pipe in the attic? Those are the four main elements. If all four are there, you have a proper passive RRNC system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "Does RRNC warranty my radon will be below 4.0 pCi/L?", "answer": "No. RRNC reduces the likelihood of high radon and makes the system easy to activate, but it doesn't warranty any specific level. Whether a passive RRNC system keeps levels low depends on the geology under your specific lot, how tight the slab is, and how strong the natural draft is through the pipe. You test to find out where you actually land.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-new-construction-rrnc-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "What is the difference between a passive RRNC system and an active one?", "answer": "A passive system relies on natural air pressure differences to draw soil gas up through the pipe and out of the house - no fan, no electricity required. An active system adds a fan to that pipe, which creates a consistent vacuum under the slab and is much more reliable at keeping levels low. Passive is better than nothing and easy to activate, but active is significantly more effective.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "Why do builders install passive RRNC instead of just putting in an active system from the start?", "answer": "Cost and simplicity - a passive system is cheaper to install and doesn't require wiring a fan into the electrical system from day one. The idea is that many homes won't need the fan, so you install the rough-in (passive) and only add the fan if testing shows you need it. If every home needed a fan, builders might as well install active systems universally.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "My new home has a passive radon system. Should I activate it right away or wait to see if I need it?", "answer": "Test first, then decide. If your post-occupancy test comes back below 2.0 pCi/L, the passive system is doing its job and you may not need to add a fan. If you're between 2.0 and 4.0, adding the fan is worth considering. If you're at 4.0 or above, the EPA recommends fixing it - and adding a fan to your existing passive system is the path forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "Is RRNC required in Illinois?", "answer": "Illinois doesn't have a statewide mandate requiring RRNC for all new construction, though some municipalities or counties may have local requirements. Many builders in the region include it as standard practice because Illinois is largely in a high-radon zone and it's become common industry behavior. Check with your local building department if you want to know what your specific jurisdiction requires.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "Does RRNC cost a lot more to build?", "answer": "Adding RRNC features during construction is relatively inexpensive compared to retrofitting a mitigation system later. The cost difference during construction is modest - mostly the aggregate layer, vapor barrier, and pipe rough-in. Retrofitting after the fact typically involves more labor, disruption, and expense. The economics almost always favor doing it during the build.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "My builder didn't install RRNC. Can it be added after construction?", "answer": "Yes. A standard sub-slab depressurization (SSD) mitigation system can be installed in an existing home - the contractor drills through the slab, inserts a pipe, and runs it out through the wall or roof. It's more involved than activating an existing passive system, but it's very doable. Most radon mitigation in Illinois is exactly this kind of retrofit work.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "Does RRNC affect my homeowner's insurance?", "answer": "Not typically in a meaningful way. Some insurers may view it as a positive feature (less risk of a major mitigation project), but there's no standard insurance credit or penalty tied to RRNC. It's worth asking your insurer, but don't expect it to dramatically change your premium.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "My builder used the term \"radon ready\" instead of RRNC. Is that the same thing?", "answer": "\"Radon ready\" is sometimes used interchangeably with passive RRNC, but it can also mean the builder only did partial prep - maybe just the pipe chase without the gravel layer or vapor barrier. Ask specifically what was installed and cross-reference it with the standard RRNC components. The terminology isn't perfectly standardized across builders.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "What's the point of RRNC if I still have to test?", "answer": "The point is that RRNC makes the solution much simpler if testing shows a problem. Instead of drilling through your slab and figuring out where to route a pipe after the fact, you already have the infrastructure in place. You're paying for optionality and lower retrofit costs - not a warranty of low radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-new-construction-rrnc-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "Does RRNC work on slab-on-grade homes differently than basements?", "answer": "The same basic principles apply - gas-permeable layer, vapor barrier, and pipe - but the execution and access points differ. A slab home without a basement has the pipe running up through the interior walls or exterior. A basement home typically routes through the basement and up. Both can be effective; the design just has to match the foundation type.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "My builder said the RRNC system will \"naturally vent radon.\" What does that mean?", "answer": "They're describing the passive mode - natural pressure differences and thermal stack effect draw soil gas up through the pipe and out of the house without a fan. This works reasonably well in many conditions, but it's not as reliable or consistent as an active fan-driven system. It's a starting point, not a finished solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "Can I inspect the RRNC system myself before moving in?", "answer": "You can look for the main components - the pipe coming up through the mechanical space or basement and exiting through the roof or wall, and an electrical outlet near the pipe for a future fan. But the only way to know if the system is actually keeping radon levels in check is to test after move-in. Visual inspection confirms the components exist, not that they're performing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "What happens if the RRNC pipe was installed but capped off? Does that still help?", "answer": "A capped pipe doesn't do much. The system works by allowing air movement - a capped pipe just sits there. Some builders install a cap temporarily during construction to keep debris out, which is fine, but it needs to be uncapped before occupancy. If you find a capped pipe, ask the builder whether it's meant to be open and confirm the system is properly set up before you move in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "Does RRNC help with other soil gases besides radon?", "answer": "Yes, as a side benefit. Sub-slab depressurization is effective against other soil gases like methane or volatile organic compounds that might seep through the foundation, though radon is the primary target for residential applications. This is rarely the reason homeowners ask for RRNC, but it's a real secondary benefit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "The builder says RRNC meets EPA guidelines. What does that mean exactly?", "answer": "The EPA has published guidance documents (like the Builder's Guide) that describe what components and installation practices constitute a proper RRNC system. When a builder says they meet EPA guidelines, they should mean all the main components are there and installed correctly. It's worth asking them to be specific about which EPA guidance they're following.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "What Is RRNC - Radon-Resistant New Construction", "question": "My builder offered an upgraded RRNC package. What would that typically include beyond the standard?", "answer": "An upgraded package might include: a larger-diameter pipe for better airflow, pre-installed fan with wiring already in place (making it truly active from day one), pressure monitoring ports, sealed sump crock cover, and comprehensive sealing of all potential radon entry points including cracks, utility penetrations, and the floor-wall joint. The more complete the sealing, the more effective the system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "My new home has a radon stub-out. What is that exactly?", "answer": "A stub-out (sometimes called a rough-in) is the pipe that's been installed in your home as part of the passive RRNC system, typically ending in the attic or just outside the roofline. It's the pipe that a fan can be attached to if you need to activate the system. Think of it as the infrastructure waiting to be used if your radon test says you need it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "Where should the radon stub-out pipe end up in the house?", "answer": "Ideally it runs from below the slab, through the interior of the house (inside conditioned or semi-conditioned space), and exits through the roof. Running it inside keeps the pipe warmer, which improves natural draft in a passive system. If it's routed outside through an exterior wall, it can still be activated with a fan, but the performance of the passive mode will be weaker.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "My builder says the radon stub-out is in the garage attic, not the house attic. Is that okay?", "answer": "It's not ideal. A stub-out in the garage attic means the pipe exits into a space that isn't heated and conditioned the same way, which reduces the thermal stack effect that makes passive systems work. It can still be activated with a fan, but you'd want to make sure the system design is sound. Ask your builder whether the pipe can be rerouted, or test first and then decide.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "Should I add a fan to my RRNC stub-out before testing or after?", "answer": "After testing. There's no point in running a fan and consuming electricity if your passive system is already keeping radon levels comfortable. Test under normal passive conditions first, then decide based on the results whether activating the fan makes sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "How do I know what size fan to add to my existing stub-out?", "answer": "That's something a radon mitigation professional handles - they'll assess your sub-slab communication (how freely air moves under your slab), pipe diameter, and layout to select the right fan. Using the wrong fan size can make the system less effective or create pressure issues. This isn't a DIY sizing situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "Can I just buy a radon fan off the internet and put it on the pipe myself?", "answer": "Technically you can buy a fan, but the installation involves more than just plugging a fan onto the pipe. You need to confirm sub-slab communication is adequate, the system is creating appropriate negative pressure under the slab, connections are sealed, and the system is properly vented to the exterior. Improper installation can look like it's working while doing very little. A professional installation comes with a manometer for monitoring and proper verification.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "My RRNC stub-out pipe goes into the attic. Does it need to go above the roof?", "answer": "Yes - the pipe should terminate above the roofline, clear of windows and doors, so the exhausted soil gas (including radon) doesn't re-enter the home. If the pipe just ends inside the attic, you're releasing radon into the attic space, which isn't useful. Check that it exits properly through the roof.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "Is there a U-tube manometer on the pipe in my new home? What does that do?", "answer": "A U-tube manometer is a simple pressure gauge - a small tube filled with liquid that shows whether the pipe is maintaining negative pressure under the slab. If the liquid in the tube is unequal on both sides, the system is working. If it's level, something may have changed (fan failure, blocked pipe). Not all passive RRNC systems include one, but they're common on active systems.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "My builder installed an electrical outlet near the radon pipe in the attic. Why?", "answer": "That outlet is there specifically for a future radon fan. When someone needs to convert the passive system to an active one, they just mount the fan on the pipe and plug it in - no rewiring required. It's a smart rough-in feature and means activation is quick and clean.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "The radon pipe in my new home has a cap on it. Is that normal?", "answer": "Builders sometimes cap the stub-out during construction to keep debris from falling in. Before or after occupancy, that cap should be removed so the system can function properly. If you're in a completed home and the cap is still on, take it off and then test to see how the system performs passively.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "My builder installed two radon pipes in my new home. Is that unusual?", "answer": "Not necessarily - larger homes with complex slab areas or disconnected sub-slab zones sometimes need multiple pipe locations to achieve adequate depressurization across the full footprint. Two pipes each with their own fan, or two pipes combined into one fan, are both viable configurations. It depends on the layout of your specific foundation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "What does the gravel layer under my new home's slab actually do for radon?", "answer": "It creates a gas-permeable pathway - essentially a network of small voids that allows soil gas (including radon) to move horizontally below the slab rather than pushing straight up through it. When the pipe creates suction (or natural draft), it can draw radon from a wider area because the gas can travel laterally through that gravel before it gets to the pipe. Without it, you'd only be drawing from directly under the pipe location.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "My builder said they used sand instead of gravel under the slab. Does that work the same way?", "answer": "Sand is less permeable than gravel and doesn't create as free-flowing a pathway for soil gas. Coarse gravel is the preferred material for RRNC because of its higher permeability. If only sand was used, the system can still work but may be less effective, especially in passive mode. This is worth asking your builder about if you're still in the construction phase.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "What is the vapor barrier in RRNC for?", "answer": "The vapor barrier - typically a thick polyethylene sheeting - goes on top of the gravel layer and under the concrete slab. It reduces the amount of moisture and soil gas that migrates directly up through the slab. It's not a perfect seal (concrete still has small pathways), but it significantly reduces the passive movement of radon into the living space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "My builder said they sealed around all the penetrations in the basement slab. Does that matter?", "answer": "Yes, significantly. Every pipe, conduit, and utility penetration through a slab is a potential radon entry point. Sealing them with polyurethane caulk or expanding foam reduces those pathways and makes the overall system more effective. Builders who take this step are doing a more thorough job than those who just install the pipe and gravel.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "Does the RRNC pipe need to be a specific diameter?", "answer": "EPA guidance typically recommends a minimum of 3-inch diameter pipe, with 4-inch being common and preferred for better airflow. A larger pipe creates less resistance and allows the system to work more effectively, whether in passive or active mode. If your builder used 2-inch pipe, it may be less effective and worth flagging.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "My builder used PVC pipe for the RRNC system. Is that the right material?", "answer": "PVC (schedule 40) is the standard material for radon mitigation and RRNC piping. It's the right call - durable, easy to seal, and appropriate for the application. You might also see ABS in some installations. Either is fine as long as joints are properly glued and sealed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "What's the sump crock cover I keep hearing about with RRNC?", "answer": "The sump crock (the pit where your sump pump sits) is often a direct pathway for soil gas to enter the basement because it's an opening into the ground below the slab. A proper RRNC or mitigation system includes a sealed cover over the sump crock with appropriate fittings for the pump discharge and electrical pass-throughs. Without it, radon can bypass the rest of your mitigation system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "RRNC Components, Stub-Outs, and Fan Basics", "question": "My builder sealed the sump crock but not the floor drain in the basement. Is that a problem?", "answer": "Floor drains can also be a pathway for soil gas, though they're typically less significant than an open sump crock. If your radon levels are elevated despite a working mitigation system, the floor drain is worth looking at. A plumber's test ball (a removable rubber plug) can temporarily block it to check if it's contributing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "I'm buying a new construction home. When is the best time to test for radon?", "answer": "After you've moved in and the home has been in normal living conditions for at least a couple of weeks - windows closed most of the time, HVAC running normally. Testing before the home is occupied and in lived-in conditions won't give you the most accurate picture of what you'll actually be exposed to day to day.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "The builder offered to test our new home before closing. Should I accept or do my own test?", "answer": "You can accept it as useful data, but seriously consider having an independent test done as well. A builder has an incentive for the result to look good, not necessarily a bad incentive, but it creates a conflict of interest. An independent test from a certified tester gives you cleaner information. Use both if you can.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "My new home is in closed-house conditions for the test. How long does the test need to run?", "answer": "A short-term test with a charcoal canister typically runs 48-96 hours (two to four days) under closed-house conditions. A long-term test (alpha track) runs 90 days to a year and gives you a better picture of average annual exposure. For initial testing of a new home, a short-term test under closed-house conditions is a reasonable starting point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "Does the presence of RRNC features change how I should run the test?", "answer": "When testing with a passive system, you generally test with the system in its normal passive state - don't block the pipe or alter it during the test. The goal is to see how the home actually performs with the system as installed. If you want to know how it performs without the passive system, that's a separate experiment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "My new construction home tested at 4.1 pCi/L even with all the RRNC features. How is that possible?", "answer": "Passive RRNC is a rough-in, not a promised outcome. It depends on natural draft, which varies by temperature differential, wind, and the specific geology under your lot. At 4.1, the EPA recommends fixing it - and the good news is you already have the pipe in place, so adding a fan to activate the system is straightforward and much less expensive than starting from scratch.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-new-construction-rrnc-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "Can I place the radon test canister in the main floor of my new home instead of the basement?", "answer": "The lowest livable level of the home is the standard placement for a radon test - that's where levels are typically highest and where you'd have the most meaningful exposure data. If your lowest level is a finished basement or walk-out basement, test there. Testing only on the main floor of a two-story home over an unfinished basement doesn't tell you the full picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "My new home has a walkout basement. Where should I put the test?", "answer": "In the walkout basement level itself, in the lowest occupiable area. A walkout basement is still in contact with the soil and can still have elevated radon even though it has above-grade windows on one wall. Test at the lowest level you actually use or plan to use.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "We ordered a long-term radon test for our new home. Does it need to run through all seasons?", "answer": "A year-long alpha-track test is ideal because it averages out all the seasonal variation. If you don't want to wait a full year, 90 days will capture at least one full seasonal change and gives a reasonably representative picture. Either is more reliable than a single 48-hour test for making long-term decisions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "My builder says they've tested every home in this subdivision and they're all fine. Should I still test mine?", "answer": "Yes. Even if that's accurate, radon can vary lot to lot within the same subdivision. The only test that tells you about your home is the one in your home. It's cheap, low-effort, and the consequences of skipping it - not knowing your levels for years - are much worse than the small amount of time it takes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "We're going to be out of the country for two months after our new home closes. Should we test before we leave or after we return?", "answer": "After you return and have been living in the home normally for a bit is the better option. You want the home in occupied conditions (normal HVAC operation, normal occupancy patterns) for at least a few days before and during the test. An empty house for two months doesn't replicate real living conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "Does new construction need closed-house conditions for the full test period?", "answer": "Yes - closed-house conditions mean keeping windows and doors closed (except for normal entry/exit) and HVAC running normally throughout the test. This applies to all short-term radon tests, new or old construction. Conditions that don't match how you actually live will give you a less useful result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "We had a radon test done in our new home and it came back at 1.2 pCi/L. Do we need to do anything?", "answer": "At 1.2, you're well below the EPA's 4.0 pCi/L action level, and below the 2.0 level where they suggest considering action. That's a reassuring result. Keep the number and if you renovate or do significant work on the foundation or basement in the future, it's worth testing again afterward to make sure things haven't changed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Testing New Construction - Timing and Process", "question": "Is it cheaper to add a fan to RRNC versus doing a full mitigation on a non-RRNC home?", "answer": "Yes, in most cases adding a fan to an existing RRNC stub-out is less expensive than a full retrofit. The rough-in work is done - the sub-slab layer, vapor barrier, pipe, and electrical outlet are already there. A full retrofit on a home without RRNC means drilling the slab, routing a new pipe, potentially fishing it through finished walls, and adding electrical. The RRNC investment during construction pays off here.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Activating and Upgrading RRNC", "question": "My builder installed a passive radon system. Should I activate it?", "answer": "Test first. If your radon comes back at 4.0 pCi/L or higher, yes - activating it (adding a fan) is the right move. If it comes back between 2.0 and 4.0, you have a decision to make that involves your comfort level with the risk. If it's below 2.0, the passive system is likely doing enough on its own for now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Activating and Upgrading RRNC", "question": "Can the RRNC stub-out be converted into an active system later?", "answer": "That's exactly what it was designed for. The passive stub-out is the rough-in stage, and adding a fan converts it to an active sub-slab depressurization system. A radon mitigation professional connects the fan to the pipe, plugs it into the outlet that should already be there, and seals everything properly. It's a relatively quick job when the infrastructure is already in place.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Activating and Upgrading RRNC", "question": "My new home builder offered to install an active radon system during construction. Is that worth it?", "answer": "It's worth considering, especially if you're in an area with a history of elevated radon. The cost difference between passive and active during construction is modest, and you'd move in knowing the system is already running and effective rather than waiting to test and potentially retrofitting later. If you're in a high-radon region and the price is reasonable, it's a solid choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Activating and Upgrading RRNC", "question": "How do I know if the fan in my active RRNC system is working?", "answer": "The main indicator is the manometer gauge on the pipe - if the liquid levels are unequal (showing negative pressure), the fan is pulling. You can also feel airflow near the fan discharge pipe outside. Many modern radon fans have indicator lights or come with a visual warning device that changes color if pressure is lost. Check it periodically.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Activating and Upgrading RRNC", "question": "My new home's RRNC fan is making noise. Is that normal?", "answer": "Some low-level fan hum is normal. Radon fans run continuously and typically produce a modest, steady sound. If the noise is loud, rattling, intermittent, or has changed from what it used to be, that's worth checking - it could indicate the fan is wearing out, something is loose, or debris got into the system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Activating and Upgrading RRNC", "question": "How long do radon fans typically last?", "answer": "A quality radon fan installed in a new home's RRNC system typically lasts many years - most manufacturers rate them for a decade or more of continuous operation. They do wear out eventually, so it's worth checking the manometer periodically and replacing the fan if it fails. They're not expensive to replace.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Activating and Upgrading RRNC", "question": "Is there any maintenance required for an active RRNC system?", "answer": "It's a low-maintenance system overall. Periodically check the manometer to confirm the system is maintaining negative pressure, listen for changes in fan noise, and visually inspect the exterior pipe termination to make sure it's not blocked. Beyond that, there's not much routine maintenance. If you're ever unsure whether it's working, a radon test will tell you quickly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Activating and Upgrading RRNC", "question": "Does the radon fan run all the time, even in summer?", "answer": "Yes, it runs continuously. Radon can enter the home in any season, and turning the fan off seasonally defeats the purpose of having it. The electricity consumption is modest - comparable to a light bulb - so there's no meaningful reason to ever turn it off intentionally.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Activating and Upgrading RRNC", "question": "My RRNC system has been running for two years. Should I retest?", "answer": "Yes, periodic retesting is a good idea. The EPA suggests retesting every two years or after any major renovation or change to the foundation. Two years of continuous operation is a good milestone to confirm the system is still performing and radon levels haven't crept up due to seasonal, geological, or structural changes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Activating and Upgrading RRNC", "question": "We're selling our new home after three years. The active RRNC system is installed. Do buyers need to retest?", "answer": "A buyer's agent will very likely request a radon test as part of the sale process regardless of the existing system. That's reasonable - they want to know the current levels in the home as-is. The active system is a selling point, and if it's been maintaining good radon levels, a test during the sale process should confirm that.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "We're finishing our basement. Should we test for radon first?", "answer": "Yes, before you put up walls and flooring. Finishing a basement - especially converting it to occupied living space - is one of the most important reasons to test. Radon levels in an unfinished basement give you a baseline; once you finish the space, the mitigation access points become harder to reach. Know the numbers before you build.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "We want to turn our unfinished basement into a family room. We haven't tested yet. Is it too late?", "answer": "It's not too late, but sooner is better. If you haven't started construction, test now in the unfinished basement. If you're mid-project, test as soon as you can in the lowest accessible area. If it comes back elevated, it's much better to address it while the space is still open than after you've put up drywall and flooring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "We're adding a bedroom in the basement. Radon is 3.5 pCi/L. Is that safe to sleep in?", "answer": "Radon at 3.5 pCi/L is below the EPA's 4.0 action level, but it's in the range where the EPA says the risk is real and worth considering mitigation. A sleeping area is long-duration occupancy, which increases cumulative exposure. At 3.5 with a bedroom being added, I'd seriously consider mitigation - especially since you'll be spending 8 hours a night down there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "We're finishing our basement this spring. Should we put in radon mitigation as part of the project?", "answer": "It's a smart time to do it. Contractors are already down there, the floor and walls are open or accessible, and routing a pipe and adding a fan is much simpler during a remodel than after everything is finished. If you're going to add living space, add radon mitigation in the same project.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "Our basement is half finished. Radon tested at 5.8 pCi/L in the unfinished side. What does that mean for the finished side?", "answer": "The radon source is the soil and sub-slab, which affects the whole basement footprint. A reading of 5.8 in one part of the basement means elevated radon is a whole-basement issue. At that level, the EPA recommends fixing it. Finishing more of the basement without mitigation would just be adding more occupancy to an already elevated-radon space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "We're putting in a media room in the basement. Do we need to test before we set up the projector and everything?", "answer": "Yes. You're about to create a room people will spend significant time in - movies, gaming, watching sports. That's long-duration occupancy, which is exactly the scenario where cumulative radon exposure matters. Test first, mitigate if needed, and then finish the room with confidence.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "We have a finished basement that we use all the time. We just found out our neighbor's radon was 8.0. Should we test?", "answer": "Absolutely - this is a good prompt to test. Neighbor's results give you useful information about the general geology in your area, but they don't tell you what's happening under your specific foundation. Get a test done. If you're using that basement regularly, you want to know your own numbers.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "We're renovating our basement and the contractor wants to install the insulation first. Should we hold off until we test?", "answer": "If radon hasn't been tested yet, test before the insulation goes in. Spray foam or rigid insulation on the walls and floors can make later mitigation more complex. You want to know what you're dealing with before you seal everything up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "We're adding a second living room in the basement. The space is already partially drywalled. Radon was 4.8 pCi/L. What now?", "answer": "At 4.8, you need mitigation. The partially finished space actually makes it a bit easier than a fully finished basement - there's still some access to the slab. A radon professional can evaluate whether they can work with the existing layout or whether it's better to do the mitigation work before the remaining finishing happens. Either way, address the 4.8 now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "My contractor says finishing the basement will make radon worse. Is that true?", "answer": "It can be. Finishing the basement changes the dynamics - you seal up more of the floor and walls, reduce natural air exchange in that space, and add long-term occupancy. Whether it actually raises the test number depends on how the finishing is done, but from an exposure standpoint, turning an unfinished basement into a living space you use regularly always increases the practical significance of whatever radon level is there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "We added spray foam insulation throughout our basement walls and floor after we finished it. Now radon is higher. Why?", "answer": "Spray foam is an excellent air barrier, which is great for energy efficiency but can also trap soil gas that was previously escaping through minor wall cracks and the floor-wall joint. By sealing those pathways, you may have redirected radon that was diffusing out through the walls to accumulate in the living space instead. This is a common unintended consequence. The fix is sub-slab depressurization, not removing the foam.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "We're finishing our basement and want to lay tile directly on the concrete slab. Does that affect radon?", "answer": "Tile on concrete doesn't provide meaningful radon reduction on its own. Concrete is porous, and tile laid over it with grout lines and adhesive doesn't create an airtight barrier. If radon is elevated, tile isn't the fix. Even so, tile doesn't typically make things significantly worse either - it's just not a mitigation strategy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Finishing the Basement - Testing and Timing", "question": "We're converting our basement into a rental unit. Is there a radon obligation we need to know about?", "answer": "There's no universal federal mandate for landlords to test or mitigate radon, though Illinois and local codes vary and some jurisdictions are strengthening requirements. Beyond the legal question, there's also an ethical one: if you're renting a space to someone who will live there full time, knowing and addressing radon levels in that space is the right thing to do. Test before you rent.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "We're converting our basement into a bedroom. What do we need to know about radon?", "answer": "Bedrooms are the most exposure-intensive rooms in the house because you spend around 8 hours there every night. A bedroom in the basement means sleeping in the area of the home with typically the highest radon concentration. Test before the conversion, mitigate if needed, and retest afterward to confirm levels are acceptable before anyone starts sleeping there regularly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "My daughter wants a basement bedroom. Radon was 3.2 pCi/L. Is that okay?", "answer": "The EPA would call 3.2 an \"elevated\" level worth considering - not an emergency, but not nothing either. For a bedroom where she'll spend 8+ hours every night, that sustained long-duration exposure is worth taking seriously. Adding mitigation when levels are 3.0-3.5 is a personal call, but for a child's sleeping space I'd lean toward addressing it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "We're adding a mother-in-law suite in the basement. Should we mitigate before moving anyone in?", "answer": "Yes. A mother-in-law suite is a full-time occupied space - likely with sleeping, long hours of daily use, and an elderly person (who may be more vulnerable to cumulative exposure effects). Test now, and if levels are at or above 2.0-4.0 pCi/L, strong consideration for mitigation before someone moves in is completely reasonable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "We're converting our garage into living space. Should I test for radon?", "answer": "Yes. If the garage slab is on grade over soil (which most garage slabs are), radon can enter from below just as it does in a basement. A converted garage turned into a bedroom, playroom, or home office becomes occupied space, and the radon dynamics from that soil-to-slab contact don't go away just because you added drywall and carpet.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "We're building an ADU (accessory dwelling unit) in our basement. What do we need to know about radon?", "answer": "An ADU is essentially a full apartment with long-term occupancy - someone will be sleeping and living there full time. Test before you finalize the conversion. If radon is elevated, build the mitigation into the ADU project so you're not coming back later to fix it after the tenant has moved in. A mitigation system installed during the renovation is always easier than a retrofit in an occupied unit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "We're converting our basement into a home gym. Radon is 4.2 pCi/L. What should I do first?", "answer": "Mitigate first, then outfit the gym. At 4.2, the EPA recommends fixing it - and a home gym is a high-occupancy, high-activity space where you're breathing heavily and doing long workouts. Elevated respiration during exercise increases radon intake. Get the mitigation in place before you start spending hours down there regularly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "We're adding a home office in the basement. Radon tested at 3.7 pCi/L. Should I mitigate?", "answer": "At 3.7, you're just below the 4.0 EPA action level, but in the zone where the EPA says the risk is real and worth considering. A home office where you work 8 hours a day is significant long-term occupancy. That's a personal decision, but I'd treat 3.7 in a daily-use workspace the same way I'd treat 3.7 in a bedroom - worth fixing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "We're finishing the basement to add a playroom for the kids. Is radon a bigger concern for children?", "answer": "Children are generally considered more sensitive to environmental exposures because they have more years of future exposure ahead of them and their tissues are still developing. A playroom where kids spend hours daily is meaningful occupancy. Test before finishing, and seriously consider mitigation if levels are in the 2.0-4.0 range - don't wait until you're at 4.0+ when kids are spending significant time down there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "We just turned our basement into a home theater. We installed everything before we tested. Radon came back at 5.1 pCi/L. What now?", "answer": "At 5.1, you need to mitigate. The good news is the theater equipment doesn't prevent a radon system from being installed - the pipe typically goes through the slab in a utility area, not under your seating. A mitigation professional can usually find a path that doesn't disrupt the theater setup. Call someone out and get an assessment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "We're adding a bathroom to the basement and now radon is higher than before. Is there a connection?", "answer": "Possibly. Breaking through the concrete for plumbing rough-in creates new openings in the slab where soil gas can enter. If the plumbing rough-in left gaps around the pipes that weren't properly sealed, those are now pathways for radon. Sealing around all plumbing penetrations and testing again will tell you if that was the source of the increase.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "Our basement is being used as a guest bedroom. We've never tested. Is this a problem?", "answer": "It's worth correcting now. Guest bedrooms might see less occupancy than a primary bedroom, but occasional guests still accumulate exposure during their stays, and if you're only using it occasionally the risk is lower - but not zero. Test to know your levels, and if they're elevated, address it before the next round of guests.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "We want to put our teenager in a basement bedroom. He's there a lot playing games and sleeping. What should we do about radon?", "answer": "Test immediately if you haven't, and address it if levels are at or above 4.0 - and seriously consider it in the 2.0-4.0 range given the long daily exposure hours. A teenager in a basement bedroom is high-occupancy, young-person use - exactly the scenario where radon exposure over years matters most. Don't delay on this one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Basement Bedroom and Living Space Conversions", "question": "We're turning the basement into a home studio for music recording. Radon is 4.6 pCi/L. Is mitigation required?", "answer": "At 4.6, mitigation is what the EPA recommends - and a recording studio is a space you'll be spending long, absorbed hours in. The acoustic treatment you're adding (foam, panels) won't do anything about radon, but a mitigation system can be installed without disrupting the acoustics. Sort the radon first, then build your studio.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Plumbing, Sump Pumps, and Foundation Work", "question": "We're putting in a sump pump. Does that change my radon risk?", "answer": "It can. The sump pit is essentially a hole to the soil below your slab - an open pathway for soil gas. If your sump crock doesn't have a sealed cover, it can be a significant radon entry point. When getting a sump pump installed, also ask about a sealed sump cover, which is a standard part of radon mitigation anyway.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Plumbing, Sump Pumps, and Foundation Work", "question": "My contractor is breaking concrete in the basement for a plumbing repair. Could that increase radon?", "answer": "It can temporarily during the work, and it can create a new ongoing pathway if the penetrations aren't properly sealed when the work is done. Make sure your contractor seals around any new pipe penetrations with appropriate caulk or foam. After the work is complete, a radon test will tell you if the levels changed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Plumbing, Sump Pumps, and Foundation Work", "question": "We just had a new sump pump installed and now our radon is 6.0 pCi/L. Before it was 2.8. Is the sump pump the reason?", "answer": "It's a very likely contributor. The sump pump installation disturbed the sub-slab soil and may have left the sump crock open or increased the connection between soil gas and your basement air. At 6.0 pCi/L, you need mitigation. The mitigation system will typically include a sealed sump cover as part of the design, which addresses that specific pathway.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Plumbing, Sump Pumps, and Foundation Work", "question": "We installed an interior drain tile system for waterproofing and now my radon is much higher. What happened?", "answer": "Interior drain tile systems (like WaterGuard or similar) create a continuous channel around the perimeter of the basement that connects to the sump pit - which is essentially a direct highway for soil gas from the foundation into the basement. This is a known and common cause of radon increases after waterproofing. The fix is typically a sub-slab depressurization system that pressurizes the drain tile channel and sump pit, drawing soil gas out rather than letting it flow into the basement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Plumbing, Sump Pumps, and Foundation Work", "question": "We just installed a new foundation waterproofing system with interior drains. My radon went up. Should I be worried?", "answer": "Yes, but it's a solvable problem. The drain tile system you installed is now connecting soil gas pathways to your basement air via the sump pit. This is one of the more common causes of sudden radon increases after basement waterproofing. A radon mitigation professional who understands drain tile systems can design a solution that addresses the specific entry pathways. Call soon - don't live with 6.0+ while you figure it out.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Plumbing, Sump Pumps, and Foundation Work", "question": "We had the exterior of our foundation waterproofed and excavated. Does that affect radon?", "answer": "Exterior waterproofing work can disturb the soil around the foundation and temporarily change the pressure dynamics, but it typically has less impact on radon than interior drain tile work. After any major foundation work, testing is a reasonable precaution to make sure your baseline hasn't changed significantly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Plumbing, Sump Pumps, and Foundation Work", "question": "We're adding a floor drain in the basement utility room. Does that need a special consideration for radon?", "answer": "Floor drains are potential radon entry points because they're open connections to the plumbing system and occasionally to soil below. Installing a floor drain with a proper trap that stays filled with water will reduce this pathway. A dry floor drain trap is an open channel for soil gas. Include sealing consideration in the plan.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Plumbing, Sump Pumps, and Foundation Work", "question": "We had a basement crack repaired by injection. My radon went down a little. Is crack sealing effective?", "answer": "Crack sealing can reduce radon entry from specific cracks, and it's a legitimate part of a comprehensive mitigation approach. However, it rarely works as a standalone solution because radon enters through many pathways - the floor-wall joint, penetrations, and the slab itself are all routes. Sealing cracks is useful as a complement to sub-slab depressurization, not a replacement for it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Plumbing, Sump Pumps, and Foundation Work", "question": "We're jackhammering the basement floor to put in a bathroom rough-in. Should we test for radon before and after?", "answer": "Testing before gives you a baseline. Testing after the work is complete (and after plumbing penetrations are sealed) tells you whether the work changed anything. Given that you're opening the slab and disturbing the sub-slab layer, an after-test is definitely worth doing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Plumbing, Sump Pumps, and Foundation Work", "question": "We installed a radon mitigation system, then a year later added a sump pump. Do I need to retest?", "answer": "Yes, definitely. Adding a sump pump adds a new potential radon entry point. Even if your mitigation system is running, the new sump crock may be bypassing it. Retest to confirm, and if levels have crept up, your mitigation professional can evaluate whether the sump crock needs to be integrated into the system with a sealed cover.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Plumbing, Sump Pumps, and Foundation Work", "question": "We're adding a French drain on the exterior of the house. Does that affect radon?", "answer": "Exterior French drains are less directly connected to your basement air than interior drain tile, so the impact on radon is typically smaller. Even so, any significant work around the foundation perimeter can alter subsurface drainage and pressure patterns. A post-project test is a reasonable precaution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Insulation, Sealing, and Building Envelope Changes", "question": "We sealed the basement floor with an epoxy coating. Will that help radon?", "answer": "Epoxy coatings reduce moisture transmission through concrete, but they're not a reliable radon barrier. Concrete has micro-pathways that epoxy doesn't fully seal, especially under pressure from soil gas. Epoxy coating might have a modest effect on radon, but it's not a mitigation strategy. Don't rely on it as your fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Insulation, Sealing, and Building Envelope Changes", "question": "We added spray foam insulation to the rim joists in the basement. Now radon is higher. Why?", "answer": "Rim joists are often minor radon pathways - gaps around the perimeter where the framing meets the foundation. Sealing them with spray foam can close those minor exhaust pathways, which sounds counterintuitive but means radon that used to slowly exit there now accumulates instead. It's a common unintended consequence of tightening a home. The fix is sub-slab depressurization, not removing the foam.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Insulation, Sealing, and Building Envelope Changes", "question": "We weatherized our whole house - spray foam, sealed windows, blower-door tested and very tight. Radon was fine before. Now it's 5.0 pCi/L. Is the tightening the reason?", "answer": "Very likely yes. Tighter homes allow less natural air dilution of indoor pollutants. Radon that previously diluted through air exchange is now accumulating. This is well documented - a well-sealed home with no ventilation strategy will typically see higher radon levels than the same home with more air leakage. At 5.0, you need mitigation. Sub-slab depressurization addresses the source; adding an ERV for ventilation can help with general indoor air quality.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Insulation, Sealing, and Building Envelope Changes", "question": "We installed rigid foam insulation on the interior basement walls. Did that trap radon?", "answer": "Rigid foam on the interior walls is mostly sealing pathways through the foundation walls themselves, which can have a mixed effect. If the walls were a significant radon entry route, sealing them may help or redirect - but it doesn't address sub-slab entry. Test after the insulation work to see where you stand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Insulation, Sealing, and Building Envelope Changes", "question": "We added an ERV (energy recovery ventilator) to the house as part of a tightening project. Will that help radon?", "answer": "An ERV adds controlled fresh air exchange, which dilutes indoor radon to some degree. However, an ERV is not a radon mitigation system - it doesn't address the source. It may reduce levels somewhat as part of a whole-house approach, but if you have significantly elevated radon, sub-slab depressurization is still the right primary fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Insulation, Sealing, and Building Envelope Changes", "question": "We're doing a deep energy retrofit on our old house - basically rebuilding the envelope from the inside. Is now a good time to add radon mitigation?", "answer": "Absolutely - this is an ideal time. You're already doing significant work, contractors are already in there, and you may have better access to the sub-slab layer than you'll ever have again. If you don't already have a mitigation system, building one into this project is much more efficient than coming back later.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Insulation, Sealing, and Building Envelope Changes", "question": "We're installing radiant floor heating in the basement - poured over the existing slab. Will that seal out radon?", "answer": "No. The new concrete pour for radiant heat is typically thin and bonded to the existing slab, which itself is still porous. Radon will find its way through the joint between old and new concrete and through the new pour itself. If radon was elevated before the radiant floor, it will still be elevated after. Test afterward and mitigate if needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Insulation, Sealing, and Building Envelope Changes", "question": "We put down a thick rubber mat flooring in the basement gym. Does that help with radon at all?", "answer": "No. Rubber mat flooring isn't an airtight barrier, and even if it were, the edges and seams would still allow soil gas to pass. Flooring materials don't meaningfully reduce radon levels. If radon is your concern, the solution is sub-slab depressurization, not floor coverings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Insulation, Sealing, and Building Envelope Changes", "question": "We're planning to pour a thicker slab over our basement floor to level it out. Will the extra concrete help with radon?", "answer": "A thicker slab can slightly reduce the rate at which radon diffuses through the concrete, but it's not a reliable mitigation strategy. The sub-slab pressure and soil gas concentration are the real drivers of radon entry, not just the slab thickness. If you want to make the new pour part of a mitigation strategy, coordinate with a radon professional to integrate a sub-slab layer and pipe before you pour.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Egress Windows, Additions, and Structural Changes", "question": "We're installing an egress window in the basement. Will that affect radon?", "answer": "An egress window itself (closed, as it will be most of the time) doesn't significantly change radon dynamics. The installation process - cutting through the foundation wall and disturbing the soil around it - can temporarily affect things. Once installed and properly sealed around the frame, an egress window doesn't meaningfully increase or decrease radon levels.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Egress Windows, Additions, and Structural Changes", "question": "We're adding a basement egress window and the contractor is excavating around the foundation. Should we expect radon to go up after?", "answer": "There may be a temporary disturbance during construction, but a properly completed egress window installation shouldn't cause a lasting radon increase. Seal around the window frame properly when it's done. If you want peace of mind, test six weeks after the project is complete to confirm levels are back to baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Egress Windows, Additions, and Structural Changes", "question": "We're adding an addition to our house with a partial basement under it. Should radon be part of the planning?", "answer": "Yes, from the very start. The addition basement is new sub-slab contact with soil, and it may connect to your existing basement. Include RRNC features in the addition foundation design, or better yet, coordinate with a radon professional to plan a mitigation system that covers both the original and addition footprint together.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Egress Windows, Additions, and Structural Changes", "question": "We're adding a sunroom addition on a slab. Does that need radon consideration?", "answer": "If the sunroom will be used regularly (heated, occupied), the slab-on-grade contact with soil means radon can enter from below. Whether it's a significant concern depends on how the sunroom is constructed and how much time you spend there. If it becomes a year-round living space, treat it like any other room on a slab and test it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Egress Windows, Additions, and Structural Changes", "question": "We're bumping out the first floor of our house over a crawl space. Do crawl spaces have radon problems?", "answer": "Crawl spaces absolutely can have radon problems. The soil-to-air pathway in a crawl space can be more direct than through a concrete slab, especially if the crawl space is unencapsulated. If you're adding a crawl space or converting existing crawl space to living space above it, radon should be part of the conversation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Egress Windows, Additions, and Structural Changes", "question": "We're converting a crawl space to a full basement. What do I need to know about radon?", "answer": "This is a significant excavation project that dramatically changes the relationship between your home and the soil below. Radon levels should be assessed as part of the planning, and if you're pouring a new slab, RRNC features should be incorporated into the pour. Test after the work is complete and the space is closed up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Egress Windows, Additions, and Structural Changes", "question": "We're encapsulating our crawl space with a thick vapor barrier. Will that reduce radon?", "answer": "Crawl space encapsulation can reduce radon entry from the soil through the crawl space floor, especially when combined with proper sealing. In some cases it makes a meaningful difference. In others, the radon source is strong enough that encapsulation alone isn't sufficient and you need active sub-crawl depressurization. Test after encapsulation to see where you land.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Egress Windows, Additions, and Structural Changes", "question": "We're digging out under our slab for a basement egress. Now radon is 7.0 pCi/L. What happened?", "answer": "Significant sub-slab excavation disturbs the soil and essentially creates an open connection between the soil below and your basement air. At 7.0, you need to mitigate promptly. The excavation created a situation where radon entry is amplified. A mitigation professional can design a system appropriate for what the space now looks like.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Garages, ADUs, and Non-Traditional Spaces", "question": "We're building an ADU (accessory dwelling unit) above our garage. The garage has a concrete slab. Should I test the garage for radon?", "answer": "If the ADU will be directly above a garage on a slab-on-grade, the relevant question is whether radon entering the garage can migrate into the ADU above. This depends on how well the garage ceiling/ADU floor is sealed. Radon from the garage slab is a real concern if the barrier between the garage and living space above isn't airtight. Test, and involve a radon professional in the ADU design.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Garages, ADUs, and Non-Traditional Spaces", "question": "We're converting our attached garage into a workshop I'll use every day. Should I test for radon?", "answer": "If you're spending significant hours in there regularly, yes. A garage is on a slab over soil, and daily occupancy of an attached garage for a workshop means meaningful cumulative time in a space that could have elevated levels. Test it. If levels are elevated, a mitigation system for the garage space is very doable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Garages, ADUs, and Non-Traditional Spaces", "question": "We're building a detached garage with a finished room above it. Is radon something I need to plan for?", "answer": "Yes, especially for the finished room above. If people will sleep or spend extended time in that upper room, plan for the possibility that radon from the garage slab below could affect it. RRNC features in the garage slab are relatively inexpensive during construction and much harder to add after the fact.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Garages, ADUs, and Non-Traditional Spaces", "question": "We're finishing a bonus room above the garage. It's not connected to the basement. Do I still need to worry about radon?", "answer": "The bonus room over the garage sits above a slab, and radon from that slab is a potential concern. Radon levels in this type of space are often lower than a basement because of the distance from the soil and more ventilation, but \"often lower\" isn't the same as \"fine.\" Test the space in the finished state to know what you're dealing with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Garages, ADUs, and Non-Traditional Spaces", "question": "We're converting a shed foundation into a studio/office. Concrete slab, no basement. What should I know about radon?", "answer": "Any concrete slab over soil is a potential radon pathway, and a finished, occupied studio is a real exposure scenario. It's a good idea to test the space after it's completed and in closed-house conditions. If levels are elevated, sub-slab depressurization from below the slab is the standard solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Garages, ADUs, and Non-Traditional Spaces", "question": "We're putting in a mother-in-law apartment above our walk-out basement. The apartment will be above grade. Do I need to test for radon up there?", "answer": "The apartment above grade will likely have lower radon than the walk-out basement below, but it can still have measurable levels, especially if radon from the basement migrates upward through the structure. Test both levels independently. Address any radon in the basement first, which will also benefit the apartment above.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Garages, ADUs, and Non-Traditional Spaces", "question": "We're building a tiny home on a permanent foundation on my property. Do I need to worry about radon?", "answer": "A permanent foundation means soil contact, and soil contact means radon potential. A tiny home on a permanent slab should be treated the same as any other structure for radon purposes - include RRNC features during construction, or test after occupancy and mitigate if needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Contractor Work, Disruption, and Short-Term Increases", "question": "We're having a lot of contractor work done in the basement - new floors, walls, everything. Should I wait to test until after they're done?", "answer": "Yes. Testing during active construction won't give you a meaningful read because the conditions aren't representative of how you'll actually live in the space. Once the project is done and the space is closed up and in occupied conditions for a few days, then test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Contractor Work, Disruption, and Short-Term Increases", "question": "My contractor is removing the old concrete basement floor and pouring a new one. What does that mean for radon during construction?", "answer": "During the removal and pour, you're exposing sub-slab soil and temporarily opening a large, direct pathway for soil gas. Radon levels during this period could spike significantly. Ventilate the space well during construction, limit exposure time in the basement during demolition, and test after the new slab is cured and the space is closed up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Contractor Work, Disruption, and Short-Term Increases", "question": "Our basement remodel contractor says they're going to \"seal everything\" and that will take care of radon. Is that true?", "answer": "Sealing alone almost never achieves meaningful radon reduction on its own. There are too many micro-pathways through concrete and at joints for a sealing-only approach to work reliably. Sealing is a complement to sub-slab depressurization, not a replacement. Be cautious about contractors who make that claim.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Contractor Work, Disruption, and Short-Term Increases", "question": "Our contractor says they do radon mitigation as part of their basement finishing package. Is it okay to let the same contractor do both?", "answer": "It can be fine, but make sure the radon mitigation component is being done by someone who is actually certified in radon mitigation - not just added as a service by a general basement finishing contractor. Radon mitigation has specific requirements and the work should be done by someone who knows the standards and can verify the system is working correctly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Contractor Work, Disruption, and Short-Term Increases", "question": "We're having a new HVAC system installed. Could that change our radon levels?", "answer": "Yes, HVAC changes can affect radon. Changes in how the home is pressurized, where supply and return air is distributed, and how much air is moved through the house can all influence radon dynamics. After a major HVAC replacement, a post-installation radon test is a reasonable precaution to confirm nothing significant has changed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Contractor Work, Disruption, and Short-Term Increases", "question": "We're adding central air to a house that only had forced air heat before. Should I retest for radon?", "answer": "Adding central AC doesn't dramatically change the HVAC dynamics the way adding a new system or significantly changing ductwork does, but if the ductwork was modified substantially or you had no central air at all before, testing after the work is done is a good check. It only takes a few days to get a result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Contractor Work, Disruption, and Short-Term Increases", "question": "We're replacing all the windows in our house with more energy-efficient ones. Will that affect radon?", "answer": "Tighter windows reduce natural air infiltration, which means less natural dilution of indoor radon. After a whole-house window replacement (especially going from old leaky windows to very tight new ones), a radon test is worth doing to confirm levels haven't increased. This is a common scenario where tightening the envelope leads to higher radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Contractor Work, Disruption, and Short-Term Increases", "question": "We're doing a whole-house renovation - gutting everything down to the studs. What's the right time to test for radon?", "answer": "Test after the renovation is complete and the home is back to finished, closed conditions. A gutted-to-studs renovation changes too many variables to get a meaningful test mid-project. Once everything is back together and the house is in normal occupied mode, test to establish your post-renovation baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Contractor Work, Disruption, and Short-Term Increases", "question": "We had to break up part of the basement floor to fix a burst pipe. Now radon is higher. What should I do?", "answer": "Check whether the plumbing penetrations were properly sealed after the repair - gaps around pipes are a common radon entry route. If the floor was patched and sealed well, the increase may be temporary. If levels stay elevated after a few weeks, a mitigation system is the appropriate next step. Give us a call and we can talk through your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Health, Risk, and Communication Questions", "question": "My basement was 5.8 pCi/L for years before we knew about radon. What does that mean for our health?", "answer": "Radon is a long-term lung cancer risk from cumulative radiation exposure - it doesn't cause acute symptoms and there's no way to know from blood tests or symptoms what your personal exposure has been. For concerns about past exposure and what it might mean for you personally, that's a conversation to have with your doctor. What you can do now is mitigate and reduce ongoing exposure going forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Health, Risk, and Communication Questions", "question": "I've been getting headaches since we finished the basement. Could it be radon?", "answer": "Radon doesn't cause headaches or acute symptoms - it's a long-term risk from accumulated radiation exposure over years, not something that causes immediate physical symptoms. Headaches in a newly finished basement are more likely related to VOCs from paint, adhesives, carpet off-gassing, or HVAC air quality. Radon is a separate and serious concern, but it works silently over years - not through acute symptoms you'd notice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Health, Risk, and Communication Questions", "question": "My kids have been in the basement playroom for two years. We just found out radon is 5.0. What do we do right now?", "answer": "Get mitigation started as soon as you can. At 5.0, you need to act, and a mitigation system can typically be installed within a week or two of contacting a professional. In the meantime, increase ventilation in that space as much as possible and minimize time down there until the system is in. Then retest after the system has been running for 24 hours to confirm levels came down.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Health, Risk, and Communication Questions", "question": "We found out our basement has 8.0 pCi/L after we just converted it into a bedroom suite for our parents. How urgent is this?", "answer": "This is urgent enough to act on quickly. Move your parents out of the space or minimize their time down there until mitigation is installed. At 8.0, the risk is real and cumulative, and elderly individuals may be more vulnerable. Get a mitigation professional out as fast as you can. This is not a \"wait a few months\" situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Health, Risk, and Communication Questions", "question": "My neighbor says radon isn't a big deal in new construction because builders have to address it. Should I trust that?", "answer": "Your neighbor means well, but the premise isn't quite right. Builders are not universally required to address radon - RRNC requirements vary by jurisdiction and are not universal. Even where RRNC features are installed, they don't warranty any specific outcome. The only way to know your home's radon level is to test it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-new-construction-rrnc-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Health, Risk, and Communication Questions", "question": "I'm pregnant and we just found out our basement is 4.8 pCi/L. How urgent is this?", "answer": "This warrants prompt action. While radon is a long-term risk and a single test result doesn't mean immediate danger, you're right to take it seriously. Get mitigation scheduled as soon as possible. In the meantime, minimize time in the basement. For specific health guidance related to pregnancy, talk to your OB. For the radon system, call us and we'll get someone out quickly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Health, Risk, and Communication Questions", "question": "We've been using a basement home office for three years. Radon was just measured at 6.0 pCi/L. I work from home full time. What does three years of exposure mean?", "answer": "There's no way to calculate individual risk precisely from known radon levels - it depends on many factors including smoking history, individual biology, and exactly how many hours you were in the space. For a personal health assessment, talk to your doctor. What you can control from here is getting mitigation installed now and reducing future exposure. The past is done - don't let the future be the same.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Health, Risk, and Communication Questions", "question": "My contractor says radon under 10.0 pCi/L isn't really worth worrying about. Is that right?", "answer": "That's not consistent with EPA guidance. The EPA recommends action at 4.0 pCi/L and says levels between 2.0 and 4.0 are worth considering mitigation. There's no threshold below which radon is \"safe\" - it's a dose-dependent risk, and any level of exposure carries some risk. The EPA's 4.0 threshold is a practical action level, not a safety line.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Health, Risk, and Communication Questions", "question": "My new home builder says radon mitigation is \"just for people who are worried.\" Should I take that seriously?", "answer": "Radon is the second leading cause of lung cancer in the United States, behind only smoking. It's not about being \"worried\" in a vague sense - it's about a specific, measurable, addressable environmental risk. Testing and mitigating if needed is the rational response to that information, not anxiety management. Take it seriously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Health, Risk, and Communication Questions", "question": "We're selling a home we've lived in for ten years and never tested for radon. The buyers want a test. Is that a problem?", "answer": "It shouldn't be a surprise - radon tests during real estate transactions are very common. The test will give everyone factual information. If levels are elevated, it's better to know and address it than to have it come up as a surprise. Many sellers choose to mitigate before listing to take the issue off the table entirely.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're building a new house from scratch. At what stage of construction should radon be addressed?", "answer": "Early in the foundation phase - before the slab is poured. The sub-slab aggregate layer, vapor barrier, and pipe rough-in need to go in before the concrete does. If you wait until the slab is poured, you've missed the easiest window and will be looking at a retrofit installation later.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "My custom home builder says they don't do radon because \"it's an old-house thing.\" Should I push back?", "answer": "Yes, firmly. Radon has nothing to do with the age of the house - it's about the geology under the lot. A brand-new custom home on high-radon soil will have elevated radon. The builder's statement reflects a common misconception. RRNC features are inexpensive during construction and much more expensive as a retrofit. Push for them.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "Our builder included a \"radon package\" as an add-on upgrade. It costs extra. Is it worth it?", "answer": "In most cases in Illinois, yes. Adding RRNC features during construction costs a fraction of what a retrofit mitigation system costs after the fact. If the builder is in a region with any history of elevated radon (which is most of Illinois), the upgrade makes economic sense even setting aside the health considerations.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We moved into a new home and the builder left some plastic sheeting rolled up in the basement and said it was for radon. What is that?", "answer": "It sounds like they left the vapor barrier material but didn't install it under the slab. That's a problem - the vapor barrier goes in during foundation construction, under the concrete, not after the fact. Ask your builder to clarify what was actually installed under the slab and what the rolled-up sheeting was intended for.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "Does radon affect the resale value of a home?", "answer": "An unmitigated elevated radon level can absolutely complicate a sale and affect price negotiations. A properly mitigated home - with a system installed, documented, and retested - is generally not a problem at resale. Most buyers and their agents understand that radon is addressable, and a system in place is a selling point, not a liability.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're finishing the basement in our new home and want to hide the radon pipe inside the wall. Is that okay?", "answer": "It's fine to box it in or run it through the wall as long as the pipe itself isn't compromised and remains accessible for future maintenance or fan installation. Burying a pipe entirely in a finished wall where you can't get to it later is something to avoid. Make sure you - and future owners - can find and service the system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're having our basement finished and the contractor said they'd relocate the radon pipe for aesthetics. Should I let them?", "answer": "Relocating the pipe is a significant change to your mitigation system and should only be done by a certified radon mitigation professional, not a general contractor. If the contractor wants to move it for aesthetics, get a radon professional involved to redesign the routing correctly. Moving the pipe incorrectly can reduce effectiveness or compromise the system entirely.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "My builder finished the basement and ran the radon pipe through the garage instead of through the house interior. Is that a problem?", "answer": "Running the pipe through the garage (unheated space) rather than through the conditioned interior reduces the thermal stack effect that helps passive systems work. It can still be activated with a fan and function as an active system, but the passive performance will be weaker. If you test and need to activate the fan, that routing will still work fine - just note it for your records.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're remodeling a home built in 1968 and adding onto it. Which part gets RRNC features?", "answer": "The new addition gets RRNC features during its construction - it's the right time to do it properly. The existing 1968 structure likely doesn't have any radon rough-in and would need a retrofit if radon is elevated. Test both the existing home and the new addition after construction is done to understand what you're working with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "Is it possible that my new home's radon is elevated because of the construction fill brought in during grading?", "answer": "Yes. The soil and fill material brought in during site prep and grading can have varying radon potential depending on where it came from. Fill from areas with uranium-bearing rock or soil can introduce radon risk even if the surrounding natural geology isn't especially high. This is another reason why testing your specific home is the only reliable way to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're building in a rural area on land that used to be farmland. Is radon different in agricultural areas?", "answer": "Radon doesn't correlate with agricultural land use - it's about the geology, specifically uranium content in the underlying soil and rock. Farmland can have high or low radon depending on what's underneath it geologically. The safest approach is to include RRNC features and test after construction regardless of prior land use.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "My builder is using ICF (insulated concrete forms) for the foundation. Does that affect radon?", "answer": "ICF foundations are concrete walls with foam insulation integrated, and they can actually be somewhat better at limiting radon through the walls because of the additional sealing and insulation. However, radon still enters primarily through the slab-floor connection and sub-slab pathway, so the foundation wall type doesn't eliminate the need for RRNC features and testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're building a home with a walkout basement. Does the walkout side need the same radon consideration?", "answer": "Yes. The walkout side has above-grade windows, but the rest of the basement is still below grade and still in contact with soil. Radon enters through the slab and below-grade walls, and the walkout openings aren't a reliable enough ventilation source to manage radon on their own. Include RRNC features and test after occupancy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're doing a remodel that includes opening up walls between the garage and the basement. Does that create a radon risk?", "answer": "Breaking down walls between the garage and living space or basement can create pathways for soil gas from the garage slab to enter the house more directly. It also potentially creates combustion appliance and carbon monoxide concerns. Make sure any connection between the garage and living space is properly sealed afterward, and test radon after the project is done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We added an in-ground storm shelter under our basement slab. Could that affect radon?", "answer": "A below-slab shelter is essentially a sub-slab void - and voids under slabs are relevant to radon dynamics. Depending on how the shelter is sealed and ventilated, it could act as a radon collection point. After installation, test radon in the basement to see if there's been any change and consult a radon professional if levels are elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're building a house on a pier foundation with no slab. Do I still need to worry about radon?", "answer": "Pier-and-beam or raised foundations with open air below them typically have lower radon levels than slab-on-grade construction because the sub-floor space is open and ventilated. However, if the crawl space under the piers is enclosed or has limited ventilation, radon can still accumulate. Test the living spaces after construction regardless.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "I'm a builder and I want to make RRNC standard on all my homes. What's the first step?", "answer": "Work with a local radon mitigation professional or follow EPA's Builder's Guide for Radon-Resistant New Construction. The standard package includes gas-permeable aggregate, vapor barrier, interior pipe route, roof penetration, and electrical rough-in for a future fan. It adds modest cost per home and gives your buyers a significant quality-of-life advantage. It's genuinely good building practice in Illinois.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're renovating a home from the 1920s with a stone rubble foundation. Is radon handled differently?", "answer": "Stone rubble foundations are highly permeable - soil gas can move through them much more freely than through poured concrete. Radon entry through the foundation walls in older homes with rubble foundations can be substantial. The mitigation approach typically focuses on sub-slab work but may also involve interior foundation wall treatments. Test and then bring in a professional who has experience with older foundation types.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We did a major kitchen remodel that extended into the basement for mechanicals. Now radon is up. Is it the remodel?", "answer": "It could be. Any work that opened the slab, created new penetrations, or changed how the basement is conditioned and sealed can affect radon. Check whether new penetrations were properly sealed, and if the system is still elevated several weeks after the project, it's worth a professional assessment to find the new entry point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "I'm buying a 1-year-old home from the original owner. They never tested. Should I test before buying?", "answer": "Absolutely. One year is long enough that a test in normal occupied conditions will give you meaningful results, but short enough that any needed mitigation would be straightforward (especially if RRNC features are already in place). Make it a condition of the purchase or at minimum budget for it as part of your first-week move-in tasks.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're renovating a duplex and converting it to single-family. Both basement units will become one open space. Is radon testing needed?", "answer": "Yes, and a renovation like this is a good time to address it. An expanded basement footprint means more sub-slab area to consider, and you'll want to confirm that whatever mitigation system is in place (or gets installed) covers the full new footprint, not just one unit's worth.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're doing a \"green build\" focused on air quality. Where does radon fit in that planning?", "answer": "Radon is one of the most significant indoor air quality concerns you can plan for in a green build. It fits naturally into a holistic air quality strategy alongside ventilation (ERV/HRV), VOC-free materials, and filtration. Sub-slab depressurization and RRNC features pair well with a green building philosophy and should be part of the planning from the foundation up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "Our architect didn't mention radon in the design plans for our new home. Should I bring it up?", "answer": "Yes, bring it up explicitly. Architects and designers don't always incorporate RRNC features by default - sometimes it falls to the owner to request it. Ask them to include proper RRNC specification in the foundation and rough-in plans. If they're unfamiliar with it, the EPA Builder's Guide is a good reference.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're adding a sun-tempered room addition with a lot of south-facing glass. The addition will have a concrete slab. Radon concern?", "answer": "Any habitable room on a concrete slab over soil has radon exposure potential. A sunroom addition that's used regularly - especially one tempered well enough to be occupied through much of the year - warrants radon consideration. Test the addition after it's complete and occupied, and if levels are elevated, a small sub-slab system for that footprint is very doable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're putting in a geothermal heat pump that involves drilling deep into the ground. Could that affect radon?", "answer": "Geothermal drilling is typically for loop fields away from the house footprint, and the closed-loop system doesn't directly connect soil gas to indoor air. It's unlikely to affect radon in the house. Even so, if the drilling happens near the foundation and disrupts the soil there, a post-installation test is a reasonable precaution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're adding a heated driveway system under the concrete of the attached garage floor. Will that affect radon in the attached garage?", "answer": "The heating system itself doesn't change the radon dynamics from the soil below, though the installation process (breaking and re-pouring concrete) temporarily opens the slab. Make sure the new concrete pour is properly installed and consider testing the garage and adjacent interior spaces after the project is complete.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're renovating a home that has a crawl space under part of it and a basement under the rest. Is radon more likely to come from one or the other?", "answer": "Both are potential sources. Crawl spaces can sometimes be higher because the soil is more directly exposed to the air in that space. The basement's concrete slab provides more of a barrier but isn't impermeable. The whole-home picture matters - test both zones and address what you find. A mitigation system that covers both footprints is doable in this kind of mixed-foundation situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're replacing our poured concrete basement floor with a tile-over-slab system. My contractor wants to pour a leveling compound first. Will that change radon?", "answer": "A thin leveling compound pour over existing slab doesn't meaningfully change radon dynamics. It's thin, bonded to the existing concrete, and not a radon barrier. Your radon situation after this project will be essentially the same as before it. If you had radon concerns before, address them through sub-slab depressurization, not the floor system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We just moved into a new construction home and want to buy a continuous radon monitor. Which one should we get?", "answer": "A continuous radon monitor is a great long-term investment for a new home, especially one with an active RRNC system where you want to verify it's working. Devices from brands like Airthings and Safety Siren are well-regarded for home use. They give you ongoing awareness rather than a single point-in-time test. Just make sure you're testing in the lowest occupiable level to get the most meaningful reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "My new home has a radon system with a fan already installed. The builder says it was \"pre-activated.\" What does that mean?", "answer": "It means the builder installed the full active system - fan, pipe, electrical - rather than just the passive rough-in. Pre-activated is a good thing. You still want to test to confirm it's performing well and actually reducing radon to acceptable levels, but you're starting from a better place than a passive-only system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "Can I turn off the radon fan in the winter to save energy? It gets cold in Illinois.", "answer": "Don't turn it off. Radon entry is influenced by the temperature differential between indoors and outdoors, and winter conditions in Illinois actually tend to drive higher radon levels because the pressure gradient is strongest when it's cold outside. Turning off the fan in winter is exactly the wrong time to do it. The energy draw is small - comparable to a night light. Keep it running year-round.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're putting a finished ceiling in the basement. Should we test before putting up the drywall?", "answer": "If you haven't tested yet, yes - test before the ceiling goes up if you want to preserve easier access to the joist bays for any future work. At minimum, know your radon situation before you seal up the ceiling. If your radon is elevated and needs mitigation, the pipe routing may need to go through or around the ceiling area, and that's easier to plan before the drywall is up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "My builder says they've been building for 30 years and never had a radon problem. Should I trust that?", "answer": "A builder's subjective experience over 30 years doesn't substitute for a test on your specific home. They may be telling the truth - or they may simply not have had systematic feedback from every homeowner about radon levels. Either way, the test is cheap, quick, and tells you what's actually happening in your home. Trust the data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're doing an addition that will require underpinning the existing foundation. Is that a radon concern?", "answer": "Underpinning is significant foundation work that disturbs the soil around and below your existing foundation. Any major sub-foundation work like this warrants a pre-project radon test to establish baseline and a post-project test to confirm conditions haven't changed significantly. If changes are found, work with a radon professional to address them.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're buying a home where the current owner says they just had the basement finished with a full radon system. How do I verify it's working?", "answer": "Ask for the post-mitigation test results - a properly installed system should come with documentation showing the radon level after installation. You can also look for the visual indicators: the pipe, the fan, the manometer gauge showing negative pressure. But honestly, running your own independent test after you move in is the only way to confirm what's actually happening now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're doing a kitchen renovation and it involves moving a load-bearing wall between the kitchen and the basement stair area. Could that affect radon?", "answer": "Structural changes that alter air flow paths in the house could theoretically affect radon dynamics, but moving an interior load-bearing wall is unlikely to have a significant direct effect on radon. The main concern would be if any foundation or slab work is involved. Post-renovation testing is always a reasonable step after a significant remodel.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're buying a new home and the builder is offering a \"radon test credit\" instead of installing mitigation. Is that a fair deal?", "answer": "A test credit is only useful if you're committed to following through with the test and the mitigation if needed. Make sure the credit is enough to cover both a proper test and the mitigation system if it comes back elevated - not just the test itself. Better still, if radon is a concern, ask for the RRNC features to be installed rather than a cash credit that may not be enough to cover a full retrofit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We did a basement renovation and sealed the floor drain as part of finishing the space. Now radon is higher. Is that the cause?", "answer": "Possibly the opposite of what you'd expect, right? If the floor drain trap was allowing radon to come in, sealing it should help. But if the drain was also serving as a minor pressure-relief vent for sub-slab pressure, sealing it might have redirected that pressure through other pathways. At elevated levels, you need sub-slab depressurization, not more sealing experiments.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "What questions should I ask when interviewing radon mitigation contractors for my new construction or remodel project?", "answer": "Ask whether they're certified by NRPP or NRSB, how long they've been working in radon mitigation, what their post-installation retest protocol looks like, and whether they'll provide a written warranty to fix the system if levels aren't adequately reduced. Ask for references from similar projects and make sure you understand exactly what they're installing before they start.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-new-construction-rrnc-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "My new home's radon fan failed and I didn't notice for several months. My radon test came back at 7.2 pCi/L. Now what?", "answer": "Replace the fan promptly and retest after it's been running for at least 24 hours before doing the follow-up test. At 7.2, you want to confirm the system is back to where it should be. This is also a good reminder to check your manometer gauge periodically so you catch fan failures quickly rather than months later.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're buying a new home in a master-planned community where radon isn't discussed at all. Should I be concerned about that?", "answer": "Radon rarely comes up in community-level marketing - it's a home-by-home assessment. The silence on radon from the community doesn't mean it's not present. Test your specific lot and home. If RRNC features aren't standard in the community, ask whether the builder will add them, or plan to test and potentially mitigate after you move in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "Can I test for radon myself in my new construction home, or do I need to hire someone?", "answer": "You can run a DIY test with a mail-in charcoal canister kit, which gives you a solid baseline reading. For a new home with RRNC features you want verified, or for a legal real estate transaction, a professionally conducted test by a certified tester carries more weight and may be required. For general personal knowledge, a quality DIY test is a reasonable starting point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're doing a barn conversion into a full-time residence. The original structure has a concrete floor. What do I need to know about radon?", "answer": "A concrete floor over soil in a converted barn is exactly the same situation as any slab-on-grade residential structure from a radon standpoint. Test after the conversion is complete and in occupied conditions. If levels are elevated, a sub-slab depressurization system is the standard solution. The residential conversion changes the radon significance because now people are living and sleeping there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're putting in a basement bathroom, and the plumber said they'll seal around all the pipe penetrations \"really well.\" Is that enough to prevent radon entry?", "answer": "Good sealing around penetrations is a positive step and does reduce one entry pathway, but it's not a comprehensive radon solution. Sub-slab pressure and the floor-wall joint and many micro-pathways through concrete aren't addressed by pipe-penetration sealing alone. It's a complement to mitigation, not a replacement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "Our new construction home builder is from out of state and unfamiliar with Illinois radon levels. Should I be concerned about that?", "answer": "Yes, it's worth paying attention to. Illinois has significant radon risk, particularly in the northern and central parts of the state. A builder unfamiliar with local conditions may not proactively include RRNC features. Ask explicitly whether they're including radon-resistant features, and if not, insist on it or get it in writing as a specification before construction begins.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're converting a historic brick building into condos, and the basement will become individual units. What do we need to know about radon for that?", "answer": "Basement residential units in an old masonry building are a higher-risk scenario - masonry foundations are porous, and the connection to soil can be more direct than through a poured concrete slab. Each basement unit is a potential radon concern. Testing each unit independently and installing mitigation systems appropriate to the building type is the right approach. This is also worth getting on the developer's radar early since it affects unit design.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "My builder gave me a warranty on the RRNC system. What does that typically cover?", "answer": "Builder warranties on RRNC systems usually cover the materials and workmanship of the installed components - the pipe, connections, and vapor barrier - not a specific radon outcome level. Read the warranty carefully to understand what's actually covered. A warranty that the pipe was installed correctly is different from a warranty that radon will be below 4.0 pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "The builder's sales agent told us the RRNC system \"fully handles radon.\" Is that accurate?", "answer": "That's overstated. A passive RRNC system is a rough-in that reduces the likelihood of elevated radon and makes activation easier - it doesn't eliminate radon or handle it automatically. Whether it actually keeps your home's radon at acceptable levels is something a test tells you, not a sales agent. Test after move-in and find out for yourself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "Our builder included a one-time radon test after move-in as part of the purchase. Is one test enough?", "answer": "One test gives you a starting point and is worth doing. For a more complete picture, a long-term alpha-track test run over 90+ days is more reliable than a single 48-hour reading. If the builder's one-time test comes back fine, consider doing a long-term follow-up test in your first or second year to confirm the result holds across seasons.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "My builder used a subcontractor for the RRNC installation. Should I be concerned about quality?", "answer": "Not necessarily, but it's worth asking whether the subcontractor is certified in radon mitigation or familiar with RRNC installation standards. An RRNC system installed by someone without that background can have subtle problems - wrong pipe diameter, poorly sealed joints, pipe terminates in the wrong location - that only show up when you test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We're buying new construction and the builder says radon testing during construction is \"not standard.\" Is that true?", "answer": "It's not universally standard, but it's also not unusual for buyers to request it. Many buyers and real estate agents request a post-completion radon test as part of the home inspection process. You can make it a condition of your purchase or request it through your buyer's agent. It's a reasonable ask.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "Can I require the builder to install an active radon system (with fan) instead of just the passive rough-in?", "answer": "Yes, this is a negotiable item in many new construction purchases, especially if you're buying before or during the build phase. Put it in writing as a specification. A builder who pushes back hard on this is worth questioning - RRNC activation during construction is a modest additional cost and a clear benefit to the buyer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "My builder says the radon pipe exits through the garage wall, not the roof. Is that acceptable?", "answer": "Exiting through an exterior wall is permissible, but the termination point matters - it needs to be above windows and doors, away from any air intakes, and positioned so exhausted gas can't re-enter the house. Roof penetration is generally cleaner and more reliably positioned. If your pipe exits through the garage wall, ask your builder to confirm the termination location meets EPA guidelines.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "The builder installed the RRNC pipe but forgot to put in the electrical rough-in for a future fan. What now?", "answer": "Ask them to add it before closing if at all possible. Running an electrical line to the attic or wherever the fan would mount is much easier during construction than after walls and ceilings are finished. If they won't, know that a radon professional can still wire a fan later - it's just more work than if the outlet were already there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We've been in our new home for six months and just tested for the first time. Is six months too late?", "answer": "Not at all. Six months in is a perfectly reasonable time to test - you're in the home under real living conditions, the HVAC has run through at least part of the seasonal cycle, and the result will give you a meaningful baseline. Test now and go from there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We tested our new home twice in the first year and got different results - 2.1 pCi/L in summer and 3.8 pCi/L in winter. Which is the real number?", "answer": "Both are real - that's seasonal variation doing its thing. Winter readings are typically higher because closed-house conditions, indoor-outdoor pressure differences, and reduced natural ventilation all favor radon accumulation. The winter reading is usually more conservative and more meaningful for understanding your worst-case exposure. Consider a long-term alpha-track test to get the annual average.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "My continuous radon monitor shows levels that fluctuate a lot hour to hour. Is that normal?", "answer": "Yes, radon levels naturally fluctuate throughout the day based on pressure changes, temperature, wind, HVAC cycling, and other factors. Continuous monitors show this real-time variation, which can be alarming if you expect a steady number. Look at the weekly or monthly average, not the hourly peaks and valleys, for a meaningful assessment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "Should I put a continuous radon monitor in every room of my new home?", "answer": "Practically, the most useful placement is the lowest occupiable level - that's where radon concentrations are typically highest and where most people spend meaningful time. A continuous monitor in the basement or main floor gives you the most actionable data. Upper floors in most homes with good mitigation will be lower, and additional monitors there add cost without proportional information value.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We want to know what our radon level was before our RRNC system was activated. Is there any way to find out?", "answer": "Not precisely, unless a test was done before activation. You can make an educated inference from your post-mitigation level - if you're at 1.2 pCi/L after the system is running, your pre-mitigation level was likely higher, but how much higher depends on how effective the system is and the local geology. If you're ever curious, you can temporarily turn off the system (not recommended long-term) and run a short test, but that's only useful for comparison purposes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We tested radon three times and got three slightly different results. Which one should I trust?", "answer": "All three are real data points - radon testing has some inherent variability, and repeated tests rarely land on exactly the same number. Look at the range: if all three are comfortably below 2.0 pCi/L, you're in good shape. If they cluster around 4.0 or above, that's a consistent signal to act on. A long-term test is the most reliable single reading because it averages out the variation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We moved into a new home with an active RRNC system already running. Is there anything I should do in the first year?", "answer": "Run a radon test in the first month or two to confirm the system is performing well. Then check the manometer gauge periodically (monthly or seasonally) to make sure the system is maintaining negative pressure. After one year, run another test to confirm the system's continued performance. Keep records of all tests.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "Can I use a short-term test to decide whether to spend money on an active RRNC system, or do I need a long-term test?", "answer": "A short-term test under proper closed-house conditions is a reasonable basis for making that decision, especially if the result is clearly above or below 4.0 pCi/L. If you land right around 3.5-4.5 and want to be confident before spending money, following up with a long-term test to confirm the average gives you better data. For a clear result well above 4.0, don't wait for a long-term test - act on the short-term result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "We had the radon in our new home tested by the home inspector. Is that test reliable?", "answer": "Home inspector radon tests can vary in quality. Make sure the inspector used a properly calibrated device and followed closed-house protocol (windows and doors closed for at least 12 hours before and during the test). If the inspector used a continuous electronic monitor that they carried to multiple inspections that day, ask about calibration. A certified tester with proper equipment is the gold standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Miscellaneous New Construction and Remodel Q&A", "question": "My new home has radon below 1.0 pCi/L. Do I need to do anything at all?", "answer": "At below 1.0, your system is performing very well. Keep the fan running and check the manometer periodically. Retest every two years or after any significant renovation. There's no action needed at that level - just maintain what you have.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're doing a kitchen remodel that involves removing the drop ceiling in the basement below the kitchen. Could that affect radon?", "answer": "Removing a drop ceiling doesn't directly affect radon - the tiles and grid are above the basement level, not a radon barrier. But if the work disturbs the HVAC system, the sump area, or the sub-slab, those changes could have indirect effects. Test after a major renovation to establish a new baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're adding a home addition that will share a wall with the existing basement. How does radon work across the connection?", "answer": "Once the addition's basement is connected to your existing basement, they're essentially one space from an air dynamics standpoint. If your existing basement has mitigation, it may or may not adequately cover the new addition footprint depending on how it's designed. After the connection is made and the addition is complete, test and bring in a radon professional if levels have changed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're renovating a mid-century split-level home. The lower level is half below grade. Is that a radon risk?", "answer": "Split-levels with a half-below-grade lower level are very common radon scenarios. The below-grade walls and floor are in soil contact, and that level is typically a family room or bedroom space people spend significant time in. Test the lower level specifically, and if it's elevated, a radon professional can design a system for the partial-below-grade configuration.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're adding a second kitchen downstairs and converting the basement into a self-contained living space for my parents. Radon was 3.1 pCi/L before renovation. Now what?", "answer": "3.1 before renovation in a space that's about to become a full-time occupied apartment warrants serious consideration of mitigation. The EPA's 2.0-4.0 range is described as worth considering - for elderly daily occupants, that consideration should lean toward acting on it. Factor mitigation into the renovation budget.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're adding a bathroom above the garage in our remodel. The garage below has a concrete slab. Does the bathroom need radon consideration?", "answer": "A bathroom above the garage is on the second floor, which is significantly removed from the soil. Radon at that height is typically much lower than at slab level. Even so, if the garage below has high radon and the floor between garage and bathroom isn't well sealed, there's a pathway. Ventilate the garage space and test the bathroom after construction to be sure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're doing a full-house refresh - new floors throughout, including the basement. Does the flooring project open up any radon issues?", "answer": "Floating floors over concrete (vinyl plank, laminate) and tile don't meaningfully change radon dynamics. If you're removing old carpet and leveling the slab, any slab work is worth noting. Generally, flooring replacements don't create radon issues, but testing after any major basement renovation is a good habit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We just bought an older home and gutted the basement. Previous owners had all kinds of junk down there. Now that it's cleaned out, radon tested at 6.4 pCi/L. Was it that high before?", "answer": "Very likely yes. An unfinished basement full of storage has the same radon dynamics as an empty one. Cleaning out storage doesn't change the sub-slab situation. The 6.4 reading reflects your home's actual radon situation, which the previous owners probably never tested. At 6.4, get mitigation on the schedule promptly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're adding a wine cellar in the basement. Is radon a concern in a wine cellar?", "answer": "If you or guests spend time in the wine cellar, yes - but most wine cellars have limited human occupancy (brief visits to retrieve bottles), which keeps cumulative exposure low. Where it matters more is if the wine cellar is sealed tightly and connected to the rest of the basement - radon that builds up in the cellar could spill into adjacent occupied spaces. Test the cellar and adjacent basement areas together.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We added a hot tub room in the basement. Now humidity is way up and radon is up too. Is there a connection?", "answer": "High humidity itself doesn't cause higher radon, but the hot tub room may have changed the pressure and ventilation dynamics in the basement. If exhaust fans are running to manage humidity, they can depressurize the space and draw more soil gas in. Review the ventilation setup and consider whether the exhaust fans are creating conditions that amplify radon entry.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're remodeling a 1990s home and the previous owner had a radon system installed in 2005. Do I need to update it?", "answer": "Check whether the system is still operational - confirm the fan is running, the manometer shows negative pressure, and do a current radon test. If it tests fine and the equipment is functioning, it may not need updating. If the fan sounds worn, the gauge shows no pressure, or radon levels are elevated, evaluate whether the existing system needs repair, upgrading, or replacement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0236", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We had radon mitigation installed five years ago in a home we're now renovating. Do we need to work around the system?", "answer": "Yes. The mitigation system's pipe routing and slab entry point need to be protected during the renovation. Make sure your contractor knows where the pipe enters the slab and doesn't damage or block it. After the renovation is complete, test to confirm the system is still performing correctly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0237", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "I'm adding a safe room / storm shelter in my basement. Will that affect radon?", "answer": "A reinforced safe room built within the existing basement doesn't fundamentally change the sub-slab dynamics. If the safe room adds a new slab penetration for anchor bolts or involves any sub-slab work, those areas should be properly sealed. Test after construction to confirm no change.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0238", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're converting a walk-out basement to a full daylight apartment by adding windows and exterior door. Will that help with radon?", "answer": "More natural ventilation pathways can help slightly with dilution, but they're not a mitigation system. The radon entry is from below the slab, and opening the walk-out level more doesn't address that source. If radon was elevated before the conversion, it will likely still be elevated after - test after the project is done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0239", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're building a home with a partially buried earth-sheltered design. Does radon work differently in an earth-sheltered home?", "answer": "Earth-sheltered homes have extensive soil contact on their walls and often roof, which means more surface area for potential radon entry than a conventional home. They often also rely on passive solar and have less natural ventilation. Radon is a very real concern in earth-sheltered construction and should be addressed with active sub-slab or sub-membrane depressurization as a standard part of the design.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0240", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "My new home has an attached greenhouse with a concrete floor. Should I test the greenhouse for radon?", "answer": "If the greenhouse is attached to the house and shares air with it, radon from the greenhouse floor can contribute to household levels. If it's a separate, non-conditioned space you're not spending extended time in, it's less of a concern. Test the attached greenhouse and the adjacent interior rooms if you spend significant time in or near that space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0241", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're adding a second story to our house. Does that involve any radon considerations?", "answer": "Adding a second story doesn't directly affect the sub-slab radon dynamics. However, if the project involves significant foundation work, changes to the HVAC system, or modifications to how air moves through the house, a post-project radon test in the basement and lowest level is a reasonable check. Major changes to building envelope or mechanical systems warrant a retest.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0242", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're finishing an attic space into a bedroom. Is radon a concern in an attic bedroom?", "answer": "Attic bedrooms are the farthest point from the soil and typically have the lowest radon levels in a home. Radon concentrates in the lowest levels and generally decreases with height. While no space is completely immune, an attic bedroom is the least-likely radon trouble spot in a house. If you're concerned, test it, but focus your radon energy on the basement and first floor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0243", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're putting in a geothermal radiant floor system that runs through the basement slab. Does that change how a radon system works?", "answer": "The radiant tubing in the slab doesn't prevent sub-slab depressurization from working, but it does require that any drilling through the slab for the radon pipe is done carefully to avoid hitting the tubing. A radon professional familiar with these situations can work around the tubing with proper planning. It adds a layer of complexity but isn't a deal-breaker.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0244", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We tore down an old house and are building a new one on the same lot. Is the radon risk from the old location?", "answer": "The radon risk is from the soil and geology of that lot, which doesn't change when you tear down and rebuild. The same soil under the same location will have similar radon potential for the new structure. Include RRNC features in the new construction and test after occupancy - the rebuild doesn't reset the geology.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0245", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "My new home was built on a lot that was previously a parking lot. Is there anything special about radon in that situation?", "answer": "The underlying geology is what drives radon, and a former parking lot just means there was previously asphalt over the same soil. The radon potential of the lot is about the subsoil and bedrock beneath it, not what was on the surface before. Include RRNC features and test after construction as you would for any new build.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0246", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're having our basement professionally waterproofed but the company is also saying they'll \"seal out radon.\" Is that accurate?", "answer": "Waterproofing and radon mitigation are related but not identical. Some waterproofing measures (vapor barriers, sealed penetrations) can reduce radon entry modestly. But a waterproofing company claiming to seal out radon should specify exactly what they're doing that constitutes actual radon mitigation. Sub-slab depressurization is the proven solution - sealing alone is not.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0247", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're buying a newly built townhome. Is radon different in attached construction?", "answer": "Radon in a townhome depends primarily on the connection to soil - if your unit is on a slab or has a basement with slab, radon dynamics are similar to a single-family home. Shared walls with neighboring units don't typically affect your radon levels significantly. Test your unit independently and address your own mitigation if needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0248", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're adding a basement wine room with thick insulated walls and a sealed door. Could that create a high-radon space?", "answer": "A highly sealed, low-ventilation enclosure in the basement could accumulate radon more than an open basement space. If you or guests will enter the wine room regularly, test it specifically and consider whether it needs its own ventilation or is covered by the main mitigation system. A tight room in the basement with no airflow is a scenario worth checking.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0249", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "I read that radon can enter through well water in some homes. If my new home uses well water, should I worry?", "answer": "Waterborne radon is a real phenomenon - radon dissolved in well water can be released into the air when water is used (showering, washing dishes). It's generally a smaller contributor to indoor air radon than soil entry, but it can be meaningful in some homes. Test both indoor air and water if you're on a private well and want the full picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0250", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're doing a major foundation repair involving helical piers. Does that affect radon?", "answer": "Helical pier installation involves drilling through or alongside the foundation, which can disturb the sub-slab area. After any significant foundation repair work, a radon test is a reasonable step to confirm the repair didn't create new entry pathways or change existing conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0251", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're planning to add a radon system during our basement renovation. When in the renovation timeline should it be installed?", "answer": "Ideally, the radon system gets installed at the point where the slab and walls are still accessible but before the final flooring, drywall, and ceiling work is done. The sub-slab suction point needs slab access, and the pipe routing is easier before walls are closed. Coordinate with your renovation contractor to schedule the radon professional at the right stage.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0252", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're building a net-zero home and want to handle all indoor air quality from the start. How does radon fit into a net-zero design?", "answer": "A net-zero home is typically very tight, which makes radon management even more critical. Include active sub-slab depressurization from the start rather than relying on a passive system, and pair it with an ERV for balanced ventilation. Net-zero and good radon mitigation are completely compatible - plan for both in the mechanical design phase, not as afterthoughts.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0253", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "How do I know if my builder actually installed the gravel layer under the slab and didn't just skip it?", "answer": "Unless you were on-site during the foundation pour to observe it, you can't verify it visually after the fact. Asking for photos from the construction process is reasonable. You can also ask for the builder's specification sheet or subcontractor documentation confirming the layer was installed. If you have serious doubt and the foundation is accessible, a radon professional can sometimes assess sub-slab communication through a diagnostic test - good communication suggests the aggregate is there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0254", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're building a custom home and our builder suggested skipping RRNC to save money. How much are we actually saving vs what we're risking?", "answer": "The cost to add RRNC features during construction is modest. The cost to retrofit a full mitigation system after the fact - with finished walls, finished basement, and no rough-in in place - is meaningfully higher and involves more disruption. Beyond the financial comparison, you'd be starting your time in the home without knowing your radon situation. The savings from skipping RRNC are unlikely to be worth it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0255", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're adding an in-law suite above the detached garage. The garage has a concrete floor. Is radon a concern up there?", "answer": "A second-floor space above a garage is somewhat removed from the soil-level radon source, but if the garage itself has elevated radon and the floor between the garage and the suite above isn't well sealed, there's a pathway. Ventilate the garage appropriately and test the suite after construction. If radon is found in the suite, the garage slab is the likely source to address.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0256", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "My new home's RRNC system drains condensation somewhere. Is that normal and what do I need to know?", "answer": "Some radon fans in certain configurations can produce condensation in humid conditions, and the pipe may have a condensation drain built in. This is normal in some climates and installations. Make sure the drain doesn't back up and that water is properly routed - a blocked drain can affect system performance in some configurations. Ask your installer where the drain goes and whether any periodic check is needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0257", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "Is there anything I can do during the construction of my new home to personally verify the RRNC is being installed correctly?", "answer": "If you have site access during construction, the sub-slab phase is the critical one to observe - look for the gravel or aggregate layer, the vapor barrier being laid over it, and the pipe going in before the slab pour. Take photos. After the slab is poured, verify the pipe is where it should be and ends up properly routed to the attic and through the roof. These are the hardest things to verify after the fact.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0258", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We just closed on a new home and the builder said the RRNC was \"up to code.\" Can you explain what that means for our actual safety?", "answer": "\"Up to code\" means the installed components met whatever local or state requirements were in effect - but codes are minimum standards, not optimal outcomes. It doesn't mean radon levels in your home are below any threshold. It means the rough-in was installed according to the rules. Your test result, not the code compliance, tells you whether you need further action.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0259", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "If I retest after RRNC activation and the levels are still high, what happens next?", "answer": "A properly designed and functioning system should bring most homes well below 4.0 pCi/L. If a retest after activation is still high, the next steps include: verifying the fan is running and maintaining pressure, checking for bypassed entry points (open sump crock, drain tile channel, floor-wall joint gaps), and potentially adding a second suction point if the sub-slab communication is poor. A professional should diagnose and fix it - most systems come with some form of performance commitment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-new-construction-rrnc-0260", "phase": "phase3", "type": "answered_qna", "topic": "workflow-new-construction-rrnc", "category": "workflow-new-construction-rrnc", "subtopic": "Renovation-Specific Radon Scenarios", "question": "We're buying a new construction home in Illinois. What's the most important radon-related thing we should do in the first 90 days?", "answer": "Run a radon test - ideally a long-term alpha-track test in the lowest level of the home, started in the first few weeks after move-in. Getting a 90-day reading gives you a solid baseline that captures some seasonal variation and is much more reliable than a single 48-hour result. If it comes back elevated, you'll know early and can address it before you've spent years in the space. That's the most impactful thing you can do.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "workflow-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "I accidentally put my radon monitor in the basement bathroom next to the toilet. Does that ruin the test?", "answer": "The bathroom isn't the worst spot, but it's not ideal. Moisture and airflow from the toilet and shower can mess with some monitor types, and bathrooms often have exhaust fans that pull air in ways that skew readings. Move it to a more central basement room away from vents, windows, and plumbing - let it settle in for 24 hours and go from there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "My husband put the radon monitor behind the furnace because the cord was in the way. Is that okay?", "answer": "No, behind the furnace is one of the worst spots. The furnace pulls air, throws heat, and can depressurize the space around it - all of which distort radon readings in ways that don't reflect what you're actually breathing. Pull it out of there and set it somewhere more neutral, like a shelf or a table in the main basement area.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "I put the radon monitor in the basement bathroom because that seemed like a safe indoor place. Was that wrong?", "answer": "It wasn't dangerous, but it wasn't ideal either. Bathrooms have exhaust fans and humidity that can throw off both continuous monitors and short-term test kits. The best spot is an open, central basement room - away from drains, fans, windows, and exterior walls - ideally about two to six feet off the floor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "My radon monitor fell off the shelf. Is it broken now?", "answer": "Most radon monitors are fairly durable, but a hard drop can damage the sensor in some models. Let it run for 24 to 48 hours after the fall and see if the readings look reasonable. If the numbers seem wildly off - spiking or dropping to zero and staying there - contact the manufacturer for a calibration check or replacement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "My radon monitor got wet from a basement leak. Is it ruined?", "answer": "It might be. Water inside the sensor housing is bad news for most electronic monitors. Dry it out thoroughly before plugging it back in, and once it's running again, watch the readings for a few days to see if they stabilize at a believable number. If it's acting erratic or not reading at all, it likely needs to be replaced.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "I put the radon monitor in a closet to keep it out of the way. Is that valid?", "answer": "Closets are poor testing locations. Air circulation is limited, and radon levels can differ significantly inside a closed closet compared to the open room around it. You want the monitor sitting in open air where you and your family actually spend time - a shelf, a table, an open room.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "My basement flooded and I put the radon monitor on a step to keep it dry. Is the reading still valid?", "answer": "Steps near the top of a basement stairway are too close to the first floor, which can pull in different air than the basement itself. The step thing was a reasonable emergency move, but the data from that period isn't very useful for making decisions. Once the water clears, put it back in the main basement area and let it run fresh.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "I covered the radon monitor with a cloth by accident for a week. Does that matter?", "answer": "It depends on the monitor. Many continuous monitors still pull air through fabric well enough, but some have directional intakes that work better uncovered. Check your readings during that week - if they're flat or unusually low, there may have been restricted airflow. It's worth running it uncovered for a few more days to get a clean baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "My radon monitor is on the highest shelf in the basement. Does height matter?", "answer": "A little. Radon tends to accumulate closer to the floor since it's heavier than air, but the difference between floor level and a high shelf is usually not dramatic. The EPA recommends somewhere between two and six feet off the floor, so a very high shelf isn't ideal. Lower it if you can.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "I put the monitor next to my sump pump. It reads crazy high sometimes. Is the sump pump doing that?", "answer": "Very possibly. Sump pits are one of the primary entry points for radon - soil gas flows right up through that opening. When the pump runs or the water level shifts, it can push more radon-containing soil gas into the space. It's worth testing with the monitor in a more central location to see if the readings calm down, and it's worth talking through whether a sump pit cover or mitigation system makes sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "My radon monitor is in the laundry room and my dryer runs all day. Does that matter?", "answer": "Yes, it can. A dryer running for hours creates negative pressure in the space - it's venting air out, which pulls replacement air in from wherever it can, including through the foundation. That can elevate readings in the laundry room specifically. Try moving the monitor to a different part of the basement to see if the readings differ.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "I put the radon monitor on top of the refrigerator because I ran out of shelf space. Is that a valid spot?", "answer": "The top of a fridge is fine height-wise, but fridges run fans and generate heat that can create localized airflow. It's not the worst placement, but a flat shelf away from appliances is always cleaner. If it's the only option, leave it for now but don't anchor your entire picture on that reading alone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "I've been burning candles in the basement and I'm worried it affected the radon reading.", "answer": "Candles produce combustion byproducts and consume oxygen, and some older-style monitors with ionization chambers could be influenced by particulates. For most modern continuous monitors, candles aren't a major factor for radon readings directly. Even so, if you've been burning them daily for a while, it's worth noting as context if your reading seems unusual.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "My radon monitor is dusty. Does dust affect the reading?", "answer": "Heavy dust accumulation over time can clog some sensor inlets and reduce airflow through the sensing chamber. It's worth gently cleaning the exterior and vents per the manufacturer's instructions. Most monitors are designed to tolerate normal household dust levels, but a thick coating is worth addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "I accidentally knocked my radon monitor into the window well. It sat outside for a day before I found it. Is the data from that period usable?", "answer": "No, that data should be disregarded. Outdoor radon levels are almost always much lower than indoor levels because the gas disperses into open air. Any averages calculated during that period would pull your indoor readings artificially downward. Let it run indoors for a fresh 48-to-72-hour window before drawing any conclusions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "My radon monitor is sitting on the concrete floor. Is that okay or should it be elevated?", "answer": "The EPA suggests keeping monitors two to six feet off the floor. Directly on concrete is lower than ideal and can be influenced by moisture wicking off the slab. Set it on a small shelf, stool, or table - even a few inches of elevation helps.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "I put the radon monitor on a window sill in the basement. The window has a gap in it. Is that messing things up?", "answer": "Yes, that's a problem. Open or gapped windows allow outdoor air to dilute whatever radon is accumulating indoors. EPA protocol for testing requires closed-house conditions - windows and doors kept closed except for normal entry and exit - for at least 12 hours before and during the test. Move the monitor away from the window and close that gap.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "Can I put a radon monitor behind a couch cushion to hide it from guests?", "answer": "That would severely limit airflow to the sensor and give you meaningless readings. The monitor needs to be out in open air where it can actually sample what's in the room. If aesthetics are the concern, there are monitor models designed to look like home decor - smaller, sleeker designs that don't scream \"testing device.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "My radon monitor is in the basement gym and I use it daily. Does a lot of foot traffic and movement affect the reading?", "answer": "Physical activity in the space isn't going to change the radon reading directly. However, heavy exercise increases your breathing rate, meaning you're pulling in more air volume per minute, which matters for personal exposure even if the monitor number stays flat. The monitor reads the concentration in the air - your breathing rate determines your actual dose.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Monitor Placement Mishaps", "question": "I set the radon monitor on a heating vent to keep it warm in the winter. Is that okay?", "answer": "That's one of the worst spots you could pick. Air blowing directly across the sensor skews readings dramatically, and the constant airflow means the monitor isn't sampling the room's actual radon concentration. Move it at least five to ten feet away from any supply or return vent.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pets and Kids Around the Monitor", "question": "My cat keeps sleeping next to the radon monitor. Should I move the cat or the monitor?", "answer": "The cat is fine - radon doesn't preferentially accumulate where warm bodies are sleeping, and the cat's presence doesn't meaningfully affect the reading. Cats seem to like the low hum of electronics. Move the monitor only if it's in a genuinely bad testing location; otherwise let the cat and the monitor coexist.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pets and Kids Around the Monitor", "question": "My dog keeps knocking the radon monitor off the shelf. Does each fall reset the readings?", "answer": "Falls don't reset the data, but they can potentially damage the sensor over time. If your pup is turning the basement into a batting cage, you might want to secure the monitor out of tail-wagging range - maybe on a higher shelf or strapped down. Check that the readings still look stable after multiple drops.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pets and Kids Around the Monitor", "question": "My toddler pulled out the plug on the radon monitor while I was asleep. How long does it take to get accurate data again?", "answer": "For most continuous monitors, the current reading after a restart settles in within a few hours, but the long-term average takes at least 24 hours to be meaningful, and 48 to 72 hours is better. The gap in power doesn't damage the monitor - you're just restarting the averaging clock. A child outlet cover is cheap insurance against this happening again.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pets and Kids Around the Monitor", "question": "My kids like to breathe on the radon monitor to see the numbers change. Is that messing up the test?", "answer": "Repeated close-range breathing into the monitor's intake could temporarily spike the CO2 and humidity readings on some devices, but most radon-specific sensors aren't measuring those. The radon reading itself shouldn't be significantly affected by a few breaths. If they're doing it constantly, gently redirect the science experiment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pets and Kids Around the Monitor", "question": "My hamster's cage is right next to the radon monitor. Does animal bedding or the cage affect the reading?", "answer": "Animal bedding and cages don't emit radon, so that's not an issue. Just make sure the cage isn't blocking airflow to the monitor's sensor. Otherwise, your hamster is an innocent bystander in this whole situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pets and Kids Around the Monitor", "question": "My parrot has been yelling at the radon monitor for weeks. Is sound affecting it?", "answer": "No, sound doesn't affect radon sensors. The parrot is expressing opinions your monitor can't process. Unless the bird is physically knocking it around, the readings are fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pets and Kids Around the Monitor", "question": "My dog barks every time the radon monitor beeps. Is that dangerous to the dog?", "answer": "If your monitor is beeping at an alert level, that's the actual concern - not the dog's reaction to it. A reading above 4.0 pCi/L sustained over time warrants attention. The beep isn't harming your dog. The radon level is what to focus on.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pets and Kids Around the Monitor", "question": "Is radon dangerous to pets?", "answer": "Radon is a risk to any living being that breathes air, including pets. Even so, most of the research is on human lung cancer risk, and pets generally have shorter lifespans and smaller respiratory volumes. The principle is the same though - chronic exposure to elevated radon isn't good for them either. A well-mitigated home is better for everyone in it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pets and Kids Around the Monitor", "question": "My cat has been coughing a lot and my radon is at 6 pCi/L. Is the radon making my cat cough?", "answer": "Radon doesn't cause acute symptoms - it's a long-term lung cancer risk from cumulative exposure, not something that causes coughing or acute illness. Your cat's cough is likely something unrelated - allergies, hairballs, or a respiratory infection worth checking with a vet. Even so, a reading of 6.0 pCi/L is above the EPA's recommended action level of 4.0, so getting a mitigation system is worth serious consideration regardless.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pets and Kids Around the Monitor", "question": "My baby crawls on the basement floor all day. Is radon worse at floor level?", "answer": "Radon does tend to concentrate slightly closer to the floor since it's heavier than air, but the difference across a few feet is typically not dramatic. What's more important is the overall concentration in the space. If your basement reads above 4.0 pCi/L and your baby spends extended time down there, that exposure picture deserves attention - kids have faster breathing rates and more years of lifetime ahead, so mitigation makes a lot of sense in that scenario.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pets and Kids Around the Monitor", "question": "My kids play in the basement every day after school. Should I be worried about their radon exposure?", "answer": "Kids are exactly who you want to protect most. Their faster breathing rates mean they pull in more air per pound of body weight, and they have more years of lifetime exposure ahead. If your basement radon is consistently above 2.0 pCi/L, it's worth talking through mitigation - and anything at or above 4.0 pCi/L is where the EPA recommends taking action.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "My radon went up when it rained for three days. Is rain raising my radon?", "answer": "Yes, rain is one of the most consistent causes of temporary radon spikes. When the soil gets saturated, radon that would normally escape through the ground gets pushed into the house instead. It's not a permanent shift - once the ground dries out, readings usually come back down. But if your average is already borderline, rain events showing spikes are worth noting.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "It's been really windy outside and my radon reading jumped. Is wind doing that?", "answer": "Wind can create pressure differences across the house that pull more soil gas in through cracks and gaps. Some homes are more sensitive to wind direction than others depending on their layout and foundation type. Windy days can cause legitimate temporary spikes in radon readings - it's a real phenomenon, not a fluke.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "My radon reading always seems lower on sunny days. Is the sun doing something to radon?", "answer": "Not directly, but sunny days often mean lower outdoor humidity, open windows, and different ventilation patterns - all of which affect indoor radon. Also, sunny days often follow dry weather, which means less soil saturation and less pressure pushing radon indoors. It's an indirect relationship, but you're picking up on something real.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "Can a radon monitor freeze in an unheated garage?", "answer": "Yes, and freezing temperatures can damage electronic sensors. Most residential radon monitors are designed for typical indoor temperature ranges - roughly 40 to 95 degrees Fahrenheit. An unheated garage in a cold climate can go well below that. Don't leave a monitor out there over winter, and don't test an unheated garage unless it's been at stable temperature for a while.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "My radon is always higher in the winter. Is that normal?", "answer": "Very normal. Winter brings closed windows, more time spent indoors, and the \"stack effect\" - warm air rising through the house creates a slight negative pressure at the foundation level that pulls more soil gas in. Radon levels in cold-climate homes typically run 20 to 50 percent higher in winter. If you haven't had the home tested in summer, it's worth doing to get both data points.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "My radon readings spike every time a storm comes through. Is that a thing?", "answer": "Yes, it's a documented pattern. The drop in barometric pressure before and during a storm effectively \"uncorks\" the soil - radon that was held in place by normal atmospheric pressure gets drawn upward faster. The spike usually resolves after the storm passes. But if your storm-day spikes are pushing you above 4.0 pCi/L regularly, that's your baseline environment responding to common conditions - worth addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "We had a tornado warning last week and I sealed the windows. My radon went up. Did I cause that?", "answer": "Closing the windows more tightly than usual can raise indoor radon slightly by reducing the dilution effect. But the bigger factor was likely the low pressure ahead of the storm system. Your sealed-up house reading is actually a useful data point - it shows what happens when the house is buttoned up, which is closer to winter operating conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "My house is built into a hillside. Does that mean more radon?", "answer": "Hillside homes and daylight-basement homes often have more soil contact than a typical slab or crawl space home - three sides of the basement may be in direct contact with earth. More soil contact generally means more potential entry points for radon. That doesn't warranty high levels, but it does mean testing is important and the results matter more.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-oddball-rambling-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "I live in a valley. Does geography affect radon?", "answer": "Geography affects the underlying soil and rock composition, which is the real driver of radon potential. Valleys cut through geological formations that may concentrate certain rock types, and some valleys trap air more than open terrain. Your specific lot matters more than the general terrain, though. A test is the only reliable answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "My neighbor says his house is on a granite ridge and his radon is sky-high. Does that mean mine is too?", "answer": "Not necessarily, but it's worth testing. Granite and uranium-bearing rock formations are associated with higher radon potential, and if your neighborhood sits on the same geology, you share the same underlying risk. Radon levels can vary dramatically house to house even on the same block, though. Your neighbor's number tells you something about the neighborhood - but only a test tells you about your house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "I live next to a cemetery. Does that affect radon?", "answer": "No. Cemeteries are not a radon source. The soil composition under your home is what matters, and the presence of a cemetery nearby has no effect on the radon-producing minerals in your foundation soil.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "I have a uranium mine 10 miles away. Does that affect my radon?", "answer": "Not in any meaningful way. Radon comes from radioactive decay in the soil immediately under your home. A uranium mine ten miles away doesn't change your local soil composition. Your radon risk is determined by what's directly under and around your foundation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "My house is near a quarry. Does blasting change radon levels?", "answer": "Quarry blasting could theoretically loosen rock and soil nearby and temporarily alter underground gas movement, but there's no solid evidence that quarry proximity causes sustained elevated indoor radon. Your foundation soil is still the main factor. Test your home rather than assuming the quarry is or isn't a factor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weather, Seasons, and Outdoor Factors", "question": "We're near a coal mine that's been closed for decades. Should I worry about radon more?", "answer": "Old mines can alter underground pressure and drainage patterns in ways that affect soil gas movement. Former coal mining areas in the U.S. do sometimes show elevated radon levels, though it varies a lot. It's a legitimate reason to test and to take the results seriously rather than assuming you're fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "We had a plumber in the basement for 3 days fixing a leak and the radon spiked. Is that from the plumber opening things up?", "answer": "Probably yes. Opening pipe penetrations, cutting into the floor, or just propping the door open repeatedly all change the airflow dynamics in the space. Those spikes during active work are real but temporary - they don't necessarily reflect your normal living conditions. Let the space settle for a few days after work is done and take another reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "I was doing concrete work in the basement. Could that spike my radon?", "answer": "Yes. Breaking or grinding concrete opens up the soil beneath, and the disruption can push more soil gas into the air. Concrete itself isn't a radon source, but the gap between the concrete and the earth below is a primary radon entry path. Any work that disturbs the slab or floor penetrations can temporarily push levels up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "Can I use the radon monitor during a renovation?", "answer": "You can leave it running, but readings during active construction - open walls, unsealed floor penetrations, constant door traffic, increased ventilation - aren't representative of your home's normal radon environment. Think of renovation-period data as noise, not signal. Retest a few weeks after the project is sealed up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "We renovated the basement and I put the radon monitor in a different room. Do I need to restart the test?", "answer": "If the monitor moved to a genuinely different zone of the basement, give it at least 24 to 48 hours in the new location before trusting those readings as representative of that space. The old location's data reflects the old conditions. If the renovation changed the basement layout significantly, a full fresh test is the cleanest approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "My basement walls are covered in spray foam insulation. Could that affect my radon?", "answer": "Spray foam doesn't emit radon, but it does seal the walls, which can reduce air exchange. If radon is entering through the walls (less common than floor penetrations, but it happens), sealing them can actually help. What it doesn't help with is floor slab penetrations. Spray foam might modestly change your readings, but it's not a mitigation system - it doesn't address the main entry pathways.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "I've been using a lot of spray paint in the basement. Could that affect my radon monitor?", "answer": "Spray paint produces volatile organic compounds (VOCs) that most radon-specific sensors don't directly measure, so your radon reading likely isn't affected. However, if you're using a combination air-quality monitor, VOC readings might spike dramatically. Ventilate well regardless - spray paint fumes are a separate health concern worth taking seriously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "I just poured a new concrete floor in the basement. My radon went down. Is that why?", "answer": "That's plausible. A fresh concrete pour seals cracks and gaps in the old floor that radon was entering through. Concrete does cure and develop small cracks over time, so the effect may diminish somewhat. It's a good sign, though - sealing the slab surface is one of the supporting strategies used in radon reduction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "I drilled a bunch of holes in my basement floor for anchors. Did I make radon worse?", "answer": "You created new entry points through the slab, which is the primary entry path for radon. Small anchor holes are unlikely to dramatically change your radon level, but if you're on the edge of an acceptable reading, it's worth testing to see if there's been a change. Sealing any unused penetrations with hydraulic cement or caulk is good practice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "My contractor put a bunch of holes in the foundation wall for a new egress window. My radon shot up. Is that why?", "answer": "Very likely. Foundation wall penetrations are direct connections between the soil and your indoor air. Those holes let soil gas in until they're properly sealed and framed. The spike should decrease once the window is properly installed and sealed around the perimeter, but retest after everything is closed up to confirm.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "We're converting our basement to an AirBnB. Do I need to test for radon?", "answer": "Radon regulations for short-term rentals vary by state, but more importantly, you're responsible for the environment you're renting to guests. A radon test is a reasonable baseline step before putting people in the space. If levels are above the EPA's recommended action level, that's something to address before guests sleep down there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "We're finishing the basement and adding drywall. Does adding walls change radon levels?", "answer": "Finishing a basement often reduces air exchange, which can cause radon levels to rise slightly compared to an open, unfinished space. You're essentially creating a more sealed living environment. It's a good time to test before and after finishing so you know what the impact was, and so you can plan for mitigation if needed before the walls are sealed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "I just had a French drain installed around the inside perimeter of the basement. My radon went up a lot. Is that related?", "answer": "Interior French drains and drain tile systems can actually increase radon entry because they create a continuous channel at the base of the walls that connects the interior to the soil. This is one of the reasons that when you pair an interior drainage system with a radon mitigation system, the two work together - the drainage channel becomes part of the depressurization system. By itself, the French drain likely made your radon worse. That's worth addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Construction, Renovation, and DIY", "question": "My house is new construction. My builder says new houses don't have radon problems. Is that true?", "answer": "That's not accurate. Radon is determined by the soil, not the age of the house. In fact, new homes are often built tighter than older homes, which can mean less natural dilution and higher indoor radon. Many builders now install passive radon systems during construction, which is smart - but without a test, you don't know what you have. Test the home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Health Questions", "question": "I've been getting headaches in the basement. Is it radon?", "answer": "Radon doesn't cause headaches, sore throats, fatigue, or any acute symptoms - it's a long-term lung cancer risk from cumulative radiation exposure over years, not something you'd feel. If you're getting headaches in the basement, look at other causes: CO from appliances, VOCs from materials, poor ventilation, or mold. And if the headaches are concerning, talk to a doctor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Health Questions", "question": "My throat has been sore and I just found out my radon is at 8 pCi/L. Is radon causing my sore throat?", "answer": "Radon doesn't cause sore throats or acute symptoms. A reading of 8.0 pCi/L is significantly above the EPA action level and deserves attention for long-term lung cancer risk, but it wouldn't make your throat sore today. If your throat is sore, that's a separate matter worth checking out with a doctor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Health Questions", "question": "Can radon make you dizzy?", "answer": "No. Radon doesn't cause dizziness or any immediate symptoms. It's a radioactive gas that works slowly over years, primarily increasing lung cancer risk. If you're dizzy in the basement, check for carbon monoxide from appliances - that does cause acute symptoms and is an immediate emergency.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Health Questions", "question": "I feel tired all the time. My neighbor says it might be radon. Is my neighbor right?", "answer": "Radon doesn't cause fatigue. It has no acute symptoms at all - it silently increases lung cancer risk over years of exposure. Fatigue has many causes worth exploring with a doctor. Your neighbor means well, but radon isn't the answer here.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Health Questions", "question": "I read that radon can cause brain cancer. Is that true?", "answer": "The established, well-studied health risk from radon is lung cancer - specifically from inhaling radon decay products that lodge in lung tissue. Radon is not associated with brain cancer in the research literature. If you've read that somewhere, it's inaccurate. The lung cancer risk is real and significant; that's what deserves your attention.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Health Questions", "question": "Can radon cause nausea? (Health Questions)", "answer": "No. Radon exposure doesn't cause nausea or any immediate physical symptoms. If you're feeling nauseous in your basement or home, other factors like carbon monoxide, mold, or ventilation issues are more likely candidates. Those deserve investigation separately from radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Health Questions", "question": "Is radon worse if you smoke?", "answer": "Yes, significantly. The lung cancer risk from radon and the risk from smoking compound each other in a way that's worse than either alone. A smoker living in a home with elevated radon has a dramatically higher lung cancer risk than a non-smoker at the same radon level. If you smoke, getting your radon levels down is even more important.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Health Questions", "question": "I've been in my basement every day for 20 years and my radon is 5 pCi/L. Should I be worried?", "answer": "That's a meaningful cumulative exposure history, and it's worth taking seriously going forward. You can't undo past exposure, but you can stop adding to it. At 5.0 pCi/L, mitigation is clearly warranted by EPA standards. For any personal health concerns about past exposure, a conversation with your doctor is the right step.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Health Questions", "question": "My kids have been in the basement all their lives. The house tests at 7 pCi/L. Is it too late?", "answer": "Past exposure is past - you can't undo it. What you can do is fix the problem now so it stops accumulating. At 7.0 pCi/L, mitigation is clearly the right move. Get it done, retest to confirm it's working, and move forward. For any specific health concerns about your kids, that's a conversation for your pediatrician.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Health Questions", "question": "Can radon come up through hardwood floors?", "answer": "Radon enters primarily through the foundation - cracks in concrete slabs, construction joints, floor/wall joints, and penetrations. Hardwood floors installed over a concrete slab don't stop radon from entering below. If the slab has entry points, radon can accumulate underneath and work its way up into the living space. The floor covering matters much less than what's happening at the foundation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "My neighbor told me that plants can reduce indoor radon. Is that true?", "answer": "Plants don't meaningfully remove radon. Radon is a gas that your ventilation and any mitigation system are responsible for addressing - plants aren't filtering it out. This is a persistent myth that conflates general air quality (where plants can have modest effects on some particulates and VOCs) with radioactive gas removal. Don't rely on houseplants for radon reduction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "I heard that salt lamps clean the air and reduce radon. Is that real?", "answer": "Salt lamps don't remove radon. They're popular for aesthetics, and some people believe they improve mood or air quality, but there's no scientific basis for them reducing radon or any radioactive gas. Radon reduction requires sub-slab depressurization or ventilation - not salt crystals.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "My essential oil diffuser has been running in the basement. Does that affect radon?", "answer": "An essential oil diffuser adds moisture and fragrance compounds to the air but doesn't affect radon levels in any meaningful way. Radon sensors measure radioactive alpha particle decay, not aroma compounds. Your diffuser isn't helping or hurting the radon reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "Can an air purifier reduce radon levels?", "answer": "Standard air purifiers - HEPA filters, activated carbon - don't remove radon gas. They filter particulates and some gases, but radon is not captured by these systems. Some air purifiers can remove radon decay products (the radioactive particles that attach to dust), which reduces exposure somewhat, but the radon gas itself remains. Proper mitigation through sub-slab depressurization is the real fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "I bought an ionic air purifier that claims to remove radon. Is that real?", "answer": "That claim is misleading at best. Ionizers can change how radon decay products behave - causing them to plate out on surfaces rather than float in the air - but this doesn't reduce the radon gas concentration in your home. You're still breathing radon; you're just changing where the decay products land. Don't count on an ionizer as radon mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "My realtor said the granite countertops could be causing my radon. Is that true?", "answer": "Granite does contain trace amounts of uranium and can emit small amounts of radon, but the contribution from countertops to indoor radon levels is typically negligible compared to what comes up through the foundation. If your radon is elevated, the countertops are almost certainly not the primary cause. Soil is the main driver.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "I heard bricks can give off radon. Is that true?", "answer": "Building materials - brick, concrete, stone - contain trace amounts of naturally occurring radioactive materials, and they can emit very small amounts of radon. In most homes, the contribution from building materials is minor compared to what enters through the foundation soil. It's not zero, but it's rarely the explanation for elevated readings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "My basement has a lot of natural stone walls. Is that where my radon is coming from?", "answer": "Stone foundation walls can contribute some radon, especially if they're field stone or granite. But the primary entry pathway in most homes is through the floor slab and its penetrations. Stone walls might be a contributing factor, but blaming them entirely without testing a variety of conditions is premature. A mitigation system addresses entry from all directions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "Does radon come from old insulation?", "answer": "Old insulation materials don't emit radon in any meaningful amount. Radon comes from soil, not insulation. If you're seeing elevated radon after working in an insulated space, the disruption of the space itself - not the insulation - is the more likely factor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "I heard that certain types of fill dirt can be radioactive and cause radon. Is that true?", "answer": "Yes, this is a real and documented problem. Some homes were built on fill dirt that contained radioactive materials - industrial byproducts, mine tailings, or similar waste - and those homes can have extreme radon problems as a result. It's rare, but it has happened. If your radon is unusually high and your neighbors' homes test low, the fill under your home is worth investigating.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "My house used to be a gas station. Should I be extra worried about radon?", "answer": "Former gas stations have soil contamination concerns (petroleum products, MTBE), but those are different from radon. Radon comes from naturally occurring uranium in the soil, not from gasoline. Former gas station properties can have all kinds of environmental concerns worth a proper environmental assessment - but radon risk is determined by the local geology, not the former land use.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "Is radon a problem in tree houses or elevated structures?", "answer": "No. Radon accumulates in enclosed spaces at or below grade where soil gas can enter. A tree house or elevated structure open to the outdoors disperses into the atmosphere. Radon is simply not a concern in those settings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Weird Sources and Myths", "question": "My house is on a pier and beam foundation. Can I still have radon?", "answer": "Yes. Pier and beam homes have a crawl space that can accumulate radon from the soil below, and that radon can migrate into the living space above. The crawl space itself can have very high radon concentrations. Testing the living area is still the right move, and if levels are elevated, crawl space encapsulation or ventilation may be part of the solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Smart Home and Tech Questions", "question": "Can Alexa tell me my radon level?", "answer": "If you have a compatible radon monitor - like certain Airthings models - and you've connected it to your smart home ecosystem, yes, you can ask Alexa for your current reading. The monitor does the actual sensing; Alexa just retrieves and reads the number. If your monitor doesn't have a smart home integration, Alexa can't help you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Smart Home and Tech Questions", "question": "Can I ask Google Assistant about my radon monitor?", "answer": "Some radon monitors with Google Home integration allow you to check readings via Google Assistant. Airthings has offered this. It depends entirely on your specific monitor and whether you've set up the integration in the companion app. Check the manufacturer's compatibility page.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Smart Home and Tech Questions", "question": "Does my Airthings work with Apple HomeKit? (Smart Home and Tech Questions)", "answer": "As of recent versions, Airthings doesn't natively support Apple HomeKit. There are workarounds using third-party bridges, but it's not an out-of-the-box integration. Check the current Airthings app for the most up-to-date compatibility list - these things change over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Smart Home and Tech Questions", "question": "My radon monitor is next to the TV. Does electronics affect the reading?", "answer": "Electronics don't emit radon or affect radon readings directly. TVs and home entertainment equipment generate heat and may cause some air movement, but they're not interfering with your radon sensor. Placement near a TV is fine as long as the monitor isn't right up against a heat vent or blocked by equipment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Smart Home and Tech Questions", "question": "Can my Wi-Fi router interfere with my radon monitor?", "answer": "No. Radon monitors measure radioactive decay events, not electromagnetic signals. Wi-Fi operates on radio frequencies that don't interfere with the sensing mechanism. You can place a radon monitor near your router without concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Smart Home and Tech Questions", "question": "Is there a radon monitor that sends alerts to my phone?", "answer": "Yes, several. Airthings, Safety Siren, and other brands offer monitors that connect via Wi-Fi or Bluetooth and send readings and alerts to a smartphone app. If real-time monitoring and push notifications matter to you, look for a continuous monitor with app connectivity.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Smart Home and Tech Questions", "question": "Can I monitor radon remotely if I have a vacation cabin?", "answer": "Yes, if you have Wi-Fi at the cabin and a connected radon monitor. Airthings and similar brands allow remote monitoring through their apps. For a cabin without internet, you'd need to check the device in person or use a long-term test kit sent to a lab.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Smart Home and Tech Questions", "question": "My radon monitor app shows a different number than the device screen. Which is right?", "answer": "Most monitors display a short-term average on the screen (like the last hour or last day) and the app shows a different time-averaged reading. Neither is \"wrong\" - they're showing different averaging windows. Check your monitor's manual to understand what each number represents and which one is most useful for your decision-making.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Smart Home and Tech Questions", "question": "I set up automation in my smart home to turn on a fan when radon goes above 2.0. Is that a real solution?", "answer": "Running additional ventilation when radon spikes is a reasonable protective response, and some homeowners do set this up. However, it's not a substitute for a proper mitigation system if your baseline levels are elevated. A fan-based response treats the symptom intermittently; a sub-slab depressurization system addresses the source continuously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Smart Home and Tech Questions", "question": "Does a smart thermostat affect radon levels?", "answer": "Indirectly, it could. A smart thermostat that opens and closes dampers, adjusts fan runtime, or manages fresh-air exchange can affect how much radon accumulates indoors. Better ventilation generally means lower radon. But a thermostat isn't a radon management tool - it's just changing conditions that radon responds to.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Smart Home and Tech Questions", "question": "My Airthings keeps losing Wi-Fi and I'm not getting readings. Is that a radon risk?", "answer": "Losing Wi-Fi means you're not seeing data remotely, but the monitor is still measuring and storing data locally. When it reconnects, most models will sync the missed data. The Wi-Fi issue doesn't mean you're unprotected - it just means you have a data gap in your remote view. Recheck the readings once it reconnects.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Vacation, Travel, and Long Absence", "question": "Can I leave my radon monitor running when we go on a 2-week vacation?", "answer": "Yes, and it's actually useful data. With the house closed up and no one coming in and out, radon levels often rise - this is closer to a worst-case picture of your home's radon environment. Long periods of monitoring give you a better long-term average than short snapshots.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Vacation, Travel, and Long Absence", "question": "I left for vacation and forgot to check my radon monitor for a month. Is that data useful?", "answer": "Yes - a month of continuous monitoring data is excellent. Long-term averages are more reliable than short-term snapshots because they account for weather events, temperature swings, and lifestyle variation. The month you were away gives you a good picture of what the house does on its own.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Vacation, Travel, and Long Absence", "question": "We're going on a six-month sabbatical. Should I leave the radon monitor running in the empty house?", "answer": "You can, and the data will be scientifically interesting, but an empty, closed house isn't quite the same as occupied conditions. Windows and doors are opened differently when people live there. Still, six months of data gives you an excellent long-term average that's very useful for decision-making when you return.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Vacation, Travel, and Long Absence", "question": "We just got back from a long trip and my radon was at 9 pCi/L the whole time. Is the house dangerous to come back to?", "answer": "9.0 pCi/L is a meaningful level that warrants mitigation - that's significantly above the EPA action level. But coming back to the house isn't an acute emergency; radon is a long-term cumulative risk, not an immediate hazard. Get mitigation scheduled promptly, but you don't need to evacuate or panic. If you want to talk through what that level means and what the next step looks like, give us a call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Vacation, Travel, and Long Absence", "question": "I rented out my house for the summer. The radon spiked while the renters were there. Is that their fault?", "answer": "Occupant behavior can affect radon - more open windows, different ventilation patterns, different HVAC use. But radon fundamentally comes from the soil, and fluctuations are common. If the reading was above the action level during their stay, that's a mitigation conversation - not a renter conversation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Vacation, Travel, and Long Absence", "question": "My cabin is only used in the summer. Do I need to worry about radon if we're only there a few weeks a year?", "answer": "Cumulative exposure is what drives radon risk, so a few weeks a year at even elevated levels represents a relatively modest dose compared to a full-time home. Even so, if you're spending time sleeping in an enclosed space with high radon, it's worth knowing the number. A simple short-term test is cheap and gives you peace of mind.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon in Water", "question": "I've heard that well water can have radon. Is that true?", "answer": "Yes. Groundwater that moves through uranium-bearing rock can pick up radon. Private well water can contain dissolved radon that is released when you run water in your home - showering is the biggest exposure route, since radon volatilizes into the air you breathe in a shower. Municipal water is typically treated to remove radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon in Water", "question": "Can well water radon affect indoor air radon?", "answer": "Yes. When well water with elevated radon is used indoors - especially in showers, dishwashers, and washing machines - the dissolved radon is released into the indoor air. Studies suggest roughly 1 pCi/L of indoor air radon for every 10,000 pCi/L of radon in water, though it varies. Both pathways matter and can be tested separately.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon in Water", "question": "I have a radon in water problem. Is that different from radon in air?", "answer": "Yes, they're separate issues with separate tests and separate solutions. Radon in water is measured in pCi/L of water (typically in the thousands to tens of thousands range), while air radon is measured in pCi/L of air (EPA action level is 4.0). The water side is typically treated with aeration or activated carbon filters at the point of entry.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon in Water", "question": "My house has both radon in water and radon in air. Is that double the problem?", "answer": "It's two sources that can compound each other. Radon entering from the soil and radon released from well water both contribute to indoor air concentration. Testing and addressing both pathways gives you the most complete solution. A water treatment system handles one; sub-slab depressurization handles the other.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon in Water", "question": "Does radon in water cause cancer from drinking it?", "answer": "The primary health concern from radon in water is inhaling it after it's released indoors, not from drinking the water directly. Ingested radon does carry some stomach/GI cancer risk, but it's much smaller than the lung cancer risk from inhalation. The EPA's concern about radon in water is mostly about its contribution to indoor air radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon in Water", "question": "My well water smells funny. Is that radon?", "answer": "Radon is odorless. A funny smell in well water is more likely hydrogen sulfide, iron bacteria, or other minerals - not radon. Those issues are worth addressing separately. If you want to know about radon in your water, that requires a specific water test from a certified lab.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon in Water", "question": "I tested my water for radon and it was 40,000 pCi/L. Is that dangerous?", "answer": "That's a significant level. The EPA's proposed maximum contaminant level for radon in water is 300 pCi/L for systems with indoor radon programs, or 4,000 pCi/L as an alternative standard. At 40,000 pCi/L, your water is contributing meaningfully to indoor air radon and is worth treating. A point-of-entry aeration system or activated carbon filter is the typical solution. It's worth calling a water treatment specialist who works with radon in water specifically.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Testing Confusion and DIY Tests", "question": "I bought a DIY radon kit from Home Depot. Is that as good as a real test?", "answer": "Short-term charcoal canisters from retail stores, when used correctly and sent to an accredited lab, are legitimate radon tests. The key words are \"used correctly\" - closed-house conditions, right height, right duration, mailed promptly. They're an appropriate starting point. If results come back elevated, a long-term test or professional follow-up is worth doing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Testing Confusion and DIY Tests", "question": "I put the Home Depot radon kit in my living room instead of the basement. Did I test the wrong place?", "answer": "For most homes, the basement is the priority testing location because radon enters from below and concentrates there first. A first-floor reading is useful but typically lower than the basement. For a complete picture, especially if you use the basement regularly, you want a basement reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Testing Confusion and DIY Tests", "question": "The radon test kit I ordered online said to mail it within 48 hours of opening. I waited 3 weeks. Is it still good?", "answer": "No - that kit's data is likely compromised. Charcoal canisters absorb radon from the moment they're opened, but they also off-gas over time after collection. Waiting three weeks before mailing throws off the calibration calculation the lab uses. You'd need to run a new test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Testing Confusion and DIY Tests", "question": "I opened my short-term radon test kit and left it on the counter for two days before I put it in the basement. Is it ruined?", "answer": "Yes, those first two days of exposure on the counter have already started the clock. The test requires deployment in the specific location you're testing, not on a kitchen counter first. Start fresh with a new kit and deploy it immediately in the basement per the instructions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Testing Confusion and DIY Tests", "question": "Can I test radon myself or do I need a professional?", "answer": "DIY short-term test kits are a valid starting point, and many homeowners use them successfully. Professional tests using calibrated continuous monitors give you richer data - hourly readings, trend lines, and a more complete picture. If your DIY result is above 4.0 pCi/L, or if you're making a major decision like buying a home or installing mitigation, professional testing gives you more confidence.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Testing Confusion and DIY Tests", "question": "My radon test came back at 3.8. Does that mean I'm fine?", "answer": "The EPA recommends considering mitigation at 2.0 pCi/L and above, and recommends taking action at 4.0 pCi/L and above. At 3.8, you're right at the threshold. There's no \"safe\" level - 3.8 carries real (if lower) risk. Mitigation at that level is reasonable, and it's worth at least discussing what your options are.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Testing Confusion and DIY Tests", "question": "My test kit got lost in the mail for two weeks after I mailed it. Will the results be accurate?", "answer": "Probably not. Charcoal canisters continue to equilibrate after they're sealed up, and a two-week delay before lab analysis can alter the reading. Most labs factor in the date sealed and the date received, but a two-week delay is outside the normal window. You may want to retest.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Testing Confusion and DIY Tests", "question": "I tested twice and got 1.8 and 6.4 pCi/L in the same basement. Which one do I believe?", "answer": "That's a meaningful swing and worth investigating before drawing conclusions. Were the tests done in different seasons, different weather, different placement? Radon does vary significantly, but a difference that large usually points to different conditions during the test. A third test - ideally a 90-day long-term test - would give you a more reliable average to make decisions with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Testing Confusion and DIY Tests", "question": "I just moved into a new house and I'm wondering if the previous owner's radon readings are still on the monitor they left behind.", "answer": "Some continuous monitors do store historical data that carries over. Check the device's app or display for historical logs. Even if data is there, the previous owner's usage conditions and furniture arrangement may have been different from yours. A fresh baseline test under your living conditions is always a good idea.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Testing Confusion and DIY Tests", "question": "Can I put a radon monitor in my car?", "answer": "Radon levels in cars are typically very low - the vehicle isn't in contact with soil and has significant air exchange. Some people have done it out of curiosity and gotten readings near outdoor levels. It's not a useful health-related test since radon risk is about indoor residential and workplace exposure, not vehicle time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Testing Confusion and DIY Tests", "question": "I tested my garage and it was 12 pCi/L. Should I be worried?", "answer": "A reading of 12 pCi/L in an attached garage is worth taking seriously, especially if air from the garage enters your living space - through a door, HVAC intake, or any shared opening. Garages with direct soil contact and limited ventilation can accumulate radon. If the garage is attached and has any connection to the home's interior, the reading matters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Testing Confusion and DIY Tests", "question": "My detached garage is attached by a breezeway. Should I test it?", "answer": "If the breezeway is enclosed and connects to living space, the garage's air is effectively connected to your home. A test in the garage and the breezeway would tell you if radon is migrating into areas you spend time in. An open breezeway is less of a concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "Is radon a problem in apartments?", "answer": "It can be. Ground-floor and basement apartments have similar radon exposure potential as any ground-contact space. Upper-floor apartments are generally at much lower risk because radon from the soil dilutes significantly by the time it reaches higher floors. If you're in a ground-floor unit, especially one with a basement level below you, testing is worth doing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "I live in a high-rise condo on the 12th floor. Do I need to worry about radon?", "answer": "Radon levels in high-rise units are typically very low - approaching outdoor background levels. The gas comes from the soil and disperses significantly before reaching higher floors. Radon is not a meaningful concern for most high-rise residents.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "I live on a houseboat. Is radon a thing for me?", "answer": "Houseboats don't sit on soil and have significant air exchange. Indoor radon in a houseboat is typically negligible. You're not dealing with a radon problem - you've accidentally chosen one of the lowest-radon living situations available.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "My house is built on a pier foundation over water. Can I have radon?", "answer": "If the structure is actually over water with no soil contact below, radon is essentially not a concern. If \"over water\" means coastal area but still on land, the soil composition matters as it does anywhere else. Test if you're uncertain.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "We live in a mobile home. Is radon different in manufactured housing?", "answer": "Mobile and manufactured homes with skirting that encloses the under-floor space can accumulate radon in that cavity, which can then enter the living space. Homes without full enclosure of the underbelly have more natural air exchange, which limits accumulation. It varies - testing is the only way to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "My house used to be a church. Does that affect radon?", "answer": "No. Radon is about the soil under the structure, not its former use. A converted church on uranium-bearing rock can have just as much radon potential as any other building. The building's history is irrelevant; its geology is what matters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "I live in a condo above a parking garage. Should I test for radon?", "answer": "If the parking garage is below grade with soil contact, it can accumulate radon. Whether that affects units above depends on air sealing between the garage and the living space. A test in your unit would tell you whether any of that garage air is reaching you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "I have an in-law suite above the garage. Is that a radon concern?", "answer": "Garages don't typically have the same level of radon concern as basements, since they have more air exchange. But an attached or integral garage with soil contact can build up radon, and an in-law suite above it could be exposed if air moves up from the garage. A test in the in-law suite specifically would answer the question.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "My radon monitor went up when I was doing laundry. Is the dryer causing radon?", "answer": "The dryer doesn't produce radon, but it does exhaust air out of the house. When a dryer is running, it depressurizes the space slightly and draws replacement air in through the foundation - which can carry radon with it. The spike you're seeing is real; the dryer is changing the pressure dynamics, not generating radon itself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "My radon goes up when I run the bathroom exhaust fan. Does that make sense?", "answer": "Yes, it does. Exhaust fans pull air out of the house, creating a slight negative pressure that draws more soil gas in through the foundation. It's the same principle as the dryer - any exhaust appliance can temporarily elevate radon by changing the indoor/outdoor pressure balance. Houses that are tightly sealed and have lots of exhaust capacity are sometimes called \"stack-prone.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "My fridge is in the basement. Should the monitor be near it or away from it?", "answer": "Away from it. Refrigerators run compressors that generate heat and some airflow around them. That localized turbulence near the coils can create microenvironments that don't represent the room's average air. Put the monitor in the open room away from appliances.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "My monitor reads higher when I'm working out in the basement. Is that from me breathing more?", "answer": "Your increased breathing rate means you're pulling more radon into your lungs per minute, but the monitor isn't measuring your breathing - it's measuring the room's radon concentration. If the reading goes up when you're down there exercising, it might be because your movement is disturbing settled air near the floor, or because you've opened a window for airflow that you later closed. The monitor reads the room, not your lungs.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "My furnace is in the basement and it runs constantly in winter. Is that making radon worse?", "answer": "Furnaces that draw combustion air from inside the basement can contribute to depressurization - pulling replacement air (including radon) up through the foundation. Older \"open combustion\" furnaces are more problematic than sealed-combustion (direct vent) models. This is one of the reasons basement radon tends to be higher in winter when the furnace is running constantly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "I have a wood stove in the basement. Could that be affecting my radon levels?", "answer": "Yes. A wood stove draws combustion air from the basement, creating negative pressure similar to a furnace. That can pull more soil gas in through cracks and penetrations. If you run the wood stove frequently and your radon levels are elevated, the stove's contribution to depressurization is worth factoring in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "My basement has a dehumidifier running 24/7. Does that affect radon?", "answer": "Dehumidifiers don't directly affect radon concentrations, but reduced humidity can sometimes lower the \"plate-out\" of radon decay products onto surfaces, which slightly affects how those products distribute in the air. This is a subtle effect. For practical purposes, a dehumidifier doesn't cause radon problems and doesn't solve them - it's just managing moisture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "I opened all the basement windows last summer and my radon dropped to 0.4. Does that mean I don't have a radon problem?", "answer": "Open windows dramatically dilute indoor radon - that low reading during open-window summer conditions isn't your home's normal radon level. The EPA testing protocol requires closed-house conditions for a reason: you need to measure what the house does when it's buttoned up, because that's how you live most of the time. Test again in winter under closed conditions for a meaningful number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "My HRV (heat recovery ventilator) was broken all winter. Could that have raised my radon levels?", "answer": "Yes. HRVs bring in fresh outdoor air and exhaust indoor air, which dilutes indoor radon. A broken HRV that's not exchanging air means you lost that dilution effect. If your radon numbers were elevated this past winter, the non-functioning HRV is a plausible contributing factor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Unusual Living Situations", "question": "I installed a whole-house fan and my radon went up. Is that why?", "answer": "Whole-house fans exhaust air out of the house rapidly, which significantly depressurizes the interior and draws air in through every gap and crack in the foundation. Running a whole-house fan can temporarily spike radon substantially. It's not a good solution for radon - it often makes it worse.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Neighbor, Community, and Location Questions", "question": "My neighbor tested at 18 pCi/L. Should I panic about my house?", "answer": "Your neighbor's reading is interesting context, but it doesn't predict your house's level. Radon can vary significantly from lot to lot depending on how the foundation was built, where the soil gas pathways are, and how the house sits. Your neighbor's very high reading is a strong reason to test your own home promptly - don't skip it. But wait for your number before deciding how worried to be.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Neighbor, Community, and Location Questions", "question": "My whole neighborhood has high radon apparently. Is there anything the city does about that?", "answer": "Some states and municipalities have radon programs, awareness campaigns, and even incentives for mitigation, but no one is coming to fix your house - that's an individual responsibility. Knowing your neighborhood has a history of elevated radon is good information: it means you should definitely test, take results seriously, and not delay if action is warranted.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Neighbor, Community, and Location Questions", "question": "We're in an EPA Zone 1 county. Does that mean I definitely have high radon?", "answer": "EPA Zone 1 means the county has a predicted average indoor radon level above 4 pCi/L based on geological and housing surveys. It doesn't mean every house in the county is above 4.0 - it means the risk is statistically elevated. You still need a test for your specific home to know where you stand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Neighbor, Community, and Location Questions", "question": "I live in Florida. My buddy in Minnesota says radon is only a northern problem. Is he right?", "answer": "He's not right. Radon is found in every state. While certain geological regions - parts of the Midwest, Mid-Atlantic, and Mountain West - have higher average levels, Florida homes have tested high, particularly homes with well water and certain soil types. Every home deserves a test regardless of geography.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Neighbor, Community, and Location Questions", "question": "We're buying a house in Iowa and our realtor says radon is everywhere there and we just have to deal with it. Is that true?", "answer": "Iowa does have some of the highest radon levels in the country on average - but \"it's everywhere\" doesn't mean \"you just live with it.\" Mitigation systems work extremely well and typically bring levels down to near-background regardless of how high they start. Don't accept elevated radon as just a cost of living in Iowa. It's fixable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Neighbor, Community, and Location Questions", "question": "I've heard the Pacific Northwest has low radon. Should I still test?", "answer": "Average radon levels in the Pacific Northwest are generally lower than in the Midwest, but \"lower on average\" doesn't mean safe or zero. Individual homes in low-radon regions can and do test high. The cost of testing is low enough that there's no good reason to skip it based on regional averages.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Neighbor, Community, and Location Questions", "question": "I just moved from Arizona to Wisconsin. My new house tests way higher. Is that normal?", "answer": "Yes. Wisconsin is one of the higher-radon states, and the geology in many parts of the state produces significant soil radon. Moving from a low-radon state to a high-radon state is a legitimate reason to test promptly. If your Wisconsin home is above 4.0 pCi/L, mitigation is the right call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Neighbor, Community, and Location Questions", "question": "My in-laws are from Poland and say radon is a huge problem there but nobody here talks about it. Are they wrong that it's serious?", "answer": "Your in-laws are right - radon is a significant public health issue, and Poland along with much of central Europe has extensive programs addressing it. The U.S. EPA considers radon the second leading cause of lung cancer in the country, causing roughly 21,000 deaths per year. It's a serious issue here too. The awareness gap is real, but the risk is real.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Monitor Behavior and Readings", "question": "My radon monitor said 0.0 for two days and then jumped to 8. Is it broken?", "answer": "That pattern could indicate a sensor warming-up period for some monitors, or possibly a sensor fault. Some monitors take 24 to 48 hours to establish a reading; some display 0.0 until they have enough data. A jump directly to 8 after nothing is worth watching - if it stabilizes at 8 for another 24 to 48 hours, that reading is probably real. If it bounces around erratically, contact the manufacturer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Monitor Behavior and Readings", "question": "My radon monitor shows \"--\" on the screen. What does that mean?", "answer": "On most monitors, dashes indicate that not enough data has been collected to display a reading yet. This is normal in the first 24 to 48 hours. Give it time and the number should populate. If dashes persist beyond 72 hours, check the manual or contact support.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Monitor Behavior and Readings", "question": "The short-term and long-term averages on my monitor are really different. Which one matters?", "answer": "Both matter, but in different ways. The long-term average is the best indicator of your typical exposure because it smooths out weather events, seasonal variation, and daily fluctuations. The short-term reading tells you what's happening right now and helps you spot correlations with things like weather or appliance use. For making decisions about mitigation, the long-term average is the more relevant number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Monitor Behavior and Readings", "question": "My radon monitor app shows a \"chart\" that goes up and down a lot. Is that normal?", "answer": "Radon levels fluctuate significantly throughout the day and across weather events - swings of 50 percent or more in a 24-hour period are normal. What you're looking at is real variation in soil gas entry rates driven by pressure, temperature, and weather. Don't try to read too much into any single peak. Focus on the long-term average trend.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Monitor Behavior and Readings", "question": "My radon was 1.1 for months, then last week it jumped to 9.7 and stayed there. What happened?", "answer": "A sustained jump like that - held for a week - is significant and worth investigating. Common causes: a crack opened in the foundation, a sump pit cover was removed, a floor penetration was disturbed, or HVAC changes altered the pressure dynamics. Check for any physical changes in the basement, and if nothing obvious explains it, it's worth having someone take a look at what changed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Monitor Behavior and Readings", "question": "Can my neighbor's mitigation system lower my radon?", "answer": "It's theoretically possible that a neighbor's sub-slab depressurization system slightly alters soil gas movement in the shared soil profile, but this effect - if real at all - is negligible for your indoor readings. Your home's radon level is determined by your home's specific conditions. Don't rely on your neighbor's system for your protection.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Monitor Behavior and Readings", "question": "My radon monitor ran out of battery. Do I lose all the data?", "answer": "Most continuous radon monitors store data in internal memory that persists through battery changes. Check your specific model's manual to confirm, but the majority of modern devices don't lose historical data when powered down. Replace the batteries and confirm the data history is still accessible in the app.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Monitor Behavior and Readings", "question": "My Airthings Wave says it needs calibration. How do I do that?", "answer": "Airthings handles sensor calibration automatically through the device firmware and backend algorithms - there's no user-side calibration procedure. If you're seeing a calibration message, check for a firmware update in the app and follow any manufacturer instructions. If the issue persists, contact Airthings support.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Monitor Behavior and Readings", "question": "I have two radon monitors side by side and they read differently. Who's right?", "answer": "It's normal for two monitors to read somewhat differently - typical consumer radon monitors have accuracy variability, and slight differences in placement (a foot apart, facing different directions) can matter. If they're within about 20 to 30 percent of each other over time, they're both working reasonably well. A large sustained difference might point to one unit having a drift issue.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Monitor Behavior and Readings", "question": "My radon monitor was in a room that got really hot one summer - like 100 degrees. Is the sensor damaged?", "answer": "Some sensors can be affected by sustained extreme heat. Most residential monitors are rated for roughly 40 to 95 degrees Fahrenheit. A room that hits 100 degrees may be at the edge or slightly outside that range. Run it for a few days in normal conditions and see if the readings look reasonable compared to historical data or a second test. If something seems off, the manufacturer can advise on whether a recalibration or replacement is needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Monitor Behavior and Readings", "question": "My continuous monitor shows a higher reading in the morning. Is that a thing?", "answer": "Yes. Overnight readings often run higher - windows are closed, occupants are sleeping rather than moving around and mixing the air, and nighttime temperature drops can increase the stack effect pulling soil gas upward. Morning readings in a closed house reflect those accumulated overnight conditions. It's a normal daily pattern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "My house sat vacant for two years. Does radon build up while a house is empty?", "answer": "In an empty house with closed windows, radon can accumulate to higher levels than in an occupied home, partly because occupant activity (opening doors, movement, appliances) normally provides some mixing and dilution. A long-vacant house that has been sealed up can have a higher starting radon level. Test it before assuming anything.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "My basement has a ping-pong table, an old sectional, a beer fridge, and my man cave stuff. Does any of that affect radon?", "answer": "None of those things emit or absorb radon. Your man cave contents are innocent. The only things that matter for radon are foundation entry points, pressure dynamics, and ventilation - not the furniture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "My brother-in-law said he sealed his sump pit with tape and his radon dropped in half. Should I try that?", "answer": "A sump pit cover is a legitimate supporting strategy - open sump pits are one of the primary entry points for soil gas. Proper covers (gasketed, sealed), not just tape, can help. On their own, they're usually not sufficient for significantly elevated levels, but as part of a broader approach they're useful. Don't just tape it and call it done if your levels are above 4.0 pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "I found an old radon test canister from 1997 in the back of a drawer. Is that useful data?", "answer": "Not really for current decisions. Radon levels can change over time as the foundation settles, cracks form, soil conditions change, and the house structure shifts. A 1997 result tells you something about what the house was doing then, but your current conditions require a current test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "My pest control company fogged my basement. Could that affect my radon test?", "answer": "Pest control chemicals are not radon-related, but fogging can temporarily change airflow and pressure in the basement. Give the space a day or two to settle and air out before relying on readings taken immediately after fogging.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "I have a backup generator in the basement. It runs for a few hours during power outages. Does that affect radon?", "answer": "A generator running indoors is a carbon monoxide emergency risk - that's the immediate safety concern. Carbon monoxide from a running generator indoors can be lethal in minutes. Generators must be run outdoors, period. On the radon question: if the generator is only running for brief periods outdoors, no radon impact. If it's indoors, stop running it there immediately for CO reasons, not radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "My radon spiked on New Year's Eve when we had a bunch of people over. Did all those people affect the reading?", "answer": "More people means more CO2 and body heat, but not more radon. What might have happened is that a lot of door opening and closing during a party changed the pressure balance temporarily. Alternatively, winter weather conditions on New Year's Eve were favorable for radon entry. People themselves don't produce radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "I did a 48-hour radon test over a weekend when the kids were home and we were in and out a lot. Is that test valid?", "answer": "Strictly speaking, EPA protocol for short-term testing requires closed-house conditions - minimal entry and exit, windows closed. A weekend with kids running in and out doesn't meet that standard. The result might be somewhat lower than your true normal level due to the extra air exchange. If the result comes back below 2.0, it's still useful as a minimum estimate. If it's above 4.0 even with all that door traffic, your actual level under normal conditions is likely even higher.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "My radon test was during a blizzard when the house was sealed completely. Is that a worst-case scenario test?", "answer": "It's close to worst-case and actually quite useful. A blizzard means tight house conditions, cold temperatures increasing the stack effect, and possibly low barometric pressure before and after the storm - all of which favor radon accumulation. If your reading under those conditions is acceptable, that's reassuring. If it's high, you now know what your worst conditions look like.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "I smoke in the basement. Could cigarette smoke affect the radon monitor reading?", "answer": "The smoke itself doesn't affect most radon sensors, but smoking indoors alongside elevated radon is a significant compounding risk factor. The combination of smoking and radon exposure multiplies lung cancer risk in ways that are much worse than either alone. If you're smoking in a basement with elevated radon, that's a particularly important situation to address - both the smoking and the radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "My radon monitor is in my basement recording studio. I'm down there 8-10 hours a day. Does that matter?", "answer": "It matters a lot. Extended daily exposure in an enclosed basement space means your cumulative dose is much higher than someone who visits the basement occasionally. If your reading is above 2.0 pCi/L and you're spending eight to ten hours a day down there, mitigation is worth serious consideration. The exposure math is different from a typical homeowner.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "I just bought a radon monitor for the first time and the first reading was 14.6. Should I evacuate?", "answer": "You don't need to evacuate. Radon is a long-term lung cancer risk from cumulative exposure over years - it doesn't pose an immediate emergency. A reading of 14.6 pCi/L is well above the EPA action level and deserves prompt attention, but prompt means \"schedule mitigation soon,\" not \"leave tonight.\" Give the monitor a few more days to establish a reliable average, and then call someone to talk through next steps.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "I tested with a short-term kit and the result was 4.1. My friend says that's basically the same as 4.0 and I should relax. Is my friend right?", "answer": "Your friend is rounding down what is effectively already at the action threshold. 4.1 is above the EPA action level of 4.0 pCi/L, and that level is a recommendation to mitigate. It's also just one short-term test - which has inherent variability. A result of 4.1 is worth taking seriously, not dismissing because it's 0.1 above the threshold.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "My radon tested at 2.5 pCi/L. The EPA says act at 4.0, so I'm fine, right?", "answer": "The EPA says 4.0 pCi/L is where action is recommended - but the same EPA guidance says levels between 2.0 and 4.0 are worth considering mitigation because the risk, while lower, is still real. There's no level where radon carries zero risk. At 2.5, you have a choice to make - it's not an emergency, but it's also not nothing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "I tested my crawl space and it was 45 pCi/L. My living room was 2.1. Should I worry?", "answer": "The crawl space number is extremely high, but what matters most is what you're breathing in occupied living areas. A living area reading of 2.1 is currently below the action threshold - but a 45 pCi/L crawl space is a serious source that could migrate upward over time, especially if there are air leaks between the crawl space and the living area. Addressing the crawl space through encapsulation or ventilation is worth doing even if the living area is borderline acceptable now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "My house is on a concrete slab and my neighbor says I can't have radon. Is he right?", "answer": "He's wrong. Slab-on-grade homes get radon too - it enters through cracks, expansion joints, and any penetrations through the slab for plumbing, electrical, or HVAC. Slab homes can be successfully mitigated. The approach is somewhat different from a basement home, but the radon problem itself is just as real.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Very Specific Oddball Scenarios", "question": "I have a vapor barrier in my crawl space. Does that stop radon?", "answer": "A vapor barrier in a crawl space helps control moisture but is not a radon mitigation system. It slows some radon entry through the exposed soil, but radon can still migrate around and through a typical plastic vapor barrier. For radon control in a crawl space, you typically need active depressurization - a pipe and fan system similar to sub-slab depressurization in basements.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My radon monitor is solar-powered. Can it work in a basement with no sunlight?", "answer": "Solar-powered radon monitors would need a light source to charge - if they're purely solar with no battery backup, a windowless basement would likely drain them. Some devices marketed as \"solar\" have both solar charging and standard USB charging. Check your specific device; a monitor with a dead battery isn't measuring anything.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "I accidentally ran my radon monitor through the washing machine. Is it ruined?", "answer": "Almost certainly. Electronic components don't survive a trip through the wash. Let it dry out completely - at least 48 to 72 hours - before trying to power it on, and even then, treat the data as suspect. For a replacement, contact the manufacturer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "I taped my radon monitor to the ceiling because I thought radon floats up. Is that right?", "answer": "Radon actually tends to accumulate closer to the floor - it's heavier than air. The ceiling is one of the least effective monitoring locations. The EPA recommends two to six feet off the floor. Take it down from the ceiling and put it on a shelf at breathing height.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My radon monitor says \"high\" and my neighbor's says \"low.\" We share a foundation wall. How is that possible?", "answer": "Radon levels can vary significantly even within the same structure depending on where entry points are concentrated, how air moves through each unit, and where each monitor is placed. If you share a foundation wall but your HVAC, sump locations, and floor penetrations are different, your radon levels can be genuinely different. Both readings can be accurate for their respective spaces.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My basement has no ceiling and opens to the main floor. Does radon stay in the basement or does it rise?", "answer": "Radon mixes throughout the home's air - it doesn't just stay in the basement. In an open-plan home where the basement connects freely to the main floor, radon that enters at the basement level can distribute upward. The basement typically has the highest concentration, but upper floors aren't isolated if there's free air exchange.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "I've been baking bread in the basement every weekend. Could the steam from bread-making affect my radon?", "answer": "Bread baking produces humidity and heat, which can modestly affect some monitor sensor types. For radon-specific sensors, the effect is minimal. It's not going to meaningfully change your readings. Enjoy the bread.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My radon was 3.2. My wife thinks we should move. Is moving necessary?", "answer": "Moving is absolutely not the answer to a radon problem. Mitigation systems are effective, affordable, and permanent - and they fix the problem without you going anywhere. A reading of 3.2 is in the zone where mitigation is worth considering, not a reason to uproot your life. Fix the house; don't leave it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My dad is 82 and spends all day in the basement watching TV. His radon is at 7 pCi/L. Should I be pushing harder to get this fixed?", "answer": "Yes. The exposure dose for someone spending 8-plus hours a day in an elevated-radon space is substantial, and while past exposure can't be undone, stopping additional accumulation matters at any age. A mitigation system is non-invasive and quick to install. At 82 and 7 pCi/L, it's worth making happen promptly. Call someone and get it scheduled.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My radon company said the system would be installed in 4 to 6 hours. My neighbor said theirs took 3 days. Who's right?", "answer": "Both are probably right for their situations. Most residential sub-slab depressurization systems are installed in a single day - commonly four to eight hours depending on the home's complexity, the number of suction points needed, and the routing of the pipe. Complex homes, crawl spaces, or homes needing multiple system components can take longer. The four-to-six-hour estimate sounds typical for a standard installation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My radon company left a hole in my foundation. Is that normal?", "answer": "A small core-drilled hole in the foundation slab is exactly how sub-slab depressurization is installed. The suction pipe goes through that hole, and the area around it is sealed. It's not damage - it's the intentional access point for the system. If the hole isn't sealed around the pipe properly, that's worth following up on.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "The radon fan in my attic is really loud. Is that normal?", "answer": "Radon fans should be relatively quiet - a consistent low hum. A loud or rattling fan may indicate the fan needs to be secured, has debris in it, or is failing. Contact the company that installed the system. Fans do wear out over time (typically after many years of continuous operation), and replacement is straightforward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My radon fan has been running for 12 years and no one has ever checked it. Should I be worried?", "answer": "After 12 years of continuous operation, the fan is probably due for an inspection or replacement. Most radon fans have a rated lifespan, and performance can degrade over time. The simplest check: your radon monitor. If your current readings are still low and stable, the system is still working. If you don't have a monitor, get one so you can confirm the system is still doing its job.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My radon system has a U-tube manometer and the liquid is at the same level on both sides. Is it broken?", "answer": "A balanced U-tube manometer - equal liquid level on both sides - means the fan isn't creating suction, which could mean the fan has failed, the system is off, or there's a blockage. A properly operating system should show a visible difference in fluid levels between the two sides. Call whoever installed the system to take a look.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "I want to paint over the radon pipe in my basement to match the wall color. Is that okay?", "answer": "Painting the exterior of the radon pipe is fine - it doesn't affect function. Just don't seal or block the pipe opening itself. The PVC pipe can be painted any color you like; plenty of homeowners paint it to blend into the room.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My radon pipe goes through my finished basement ceiling and I want to move it. Can I do that?", "answer": "Relocating a radon system pipe is possible but involves rerouting the pipe and potentially adjusting the suction point in the slab. It's not a DIY-safe project because changing the suction point location affects how well the system works. A radon mitigation contractor can assess whether the pipe can be rerouted and how to do it without compromising system performance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My buyer wants a retest after mitigation before closing. How long does that take?", "answer": "A post-mitigation retest using a 48-hour short-term charcoal test requires two days of test time plus lab analysis - typically a few days for results after the test ends. Lab rush options exist if the closing timeline is tight. Plan for at least a week from test deployment to having a result in hand for the buyer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My new home's inspection report mentioned radon but didn't give a number. How do I find out what it is?", "answer": "The inspector may have noted general radon concern without doing a test. Ask the seller for any radon testing history. If none exists, commission a test before or immediately after closing - don't wait. If a test was done and the results weren't included in what you received, request them from the inspector or seller directly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "I've been putting off radon testing for three years because I'm scared of what I'll find. Should I just do it?", "answer": "Yes - do the test. Whatever the number is, knowing it is better than not knowing it. If it's low, you gain peace of mind. If it's high, you gain the ability to fix it. Radon is one of the few serious health risks in a home that is genuinely and reliably fixable. Not knowing your number doesn't make the radon go away. Call or text and we can walk you through the simplest way to get started.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My radon test came back elevated and I feel like I've been poisoned. Am I?", "answer": "Radon exposure is a long-term cumulative risk - it's not like a poison that harms you acutely. Finding out your home has elevated radon isn't a diagnosis of illness; it's information that lets you reduce your future risk. Get the home mitigated, retest, and move forward. If you have specific health concerns, talk to your doctor - but a radon test result alone isn't a medical finding.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "I live alone and I'm single. My realtor says don't bother with radon because you're selling in five years anyway. Is that advice good?", "answer": "That's poor advice. Five years is meaningful cumulative exposure time, especially if levels are high. And when you sell, a buyer will likely request a radon test - elevated results at sale time become your problem anyway. Testing now and mitigating if needed protects you for the years you're there and prevents the issue from becoming a transaction complication later.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My friend thinks I'm obsessing over radon and that I should just open a window. Am I overreacting?", "answer": "You're not overreacting if you're basing your concern on an actual test result. Radon is real, it's measurable, and it's fixable. Opening windows helps temporarily and in good weather, but it's not a system - it's not reliable across seasons or in cold climates. If your level is elevated, a mitigation system is a durable solution, not an obsession. Your friend can relax; so can you, once the system is in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My building inspector said my crawl space radon was \"fine.\" How do I know if I trust that?", "answer": "Ask what \"fine\" means - what was the measured level, and how was it tested? An inspector offering a qualitative opinion without a documented test result is not giving you useful data. Request the actual number and the test methodology. If no actual test was done, commission one yourself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "I want to test every room of my house. How many monitors do I need?", "answer": "For most homes, the priority test location is the lowest level where people spend time - typically the basement or lowest floor above grade. Once you know that number, you have the most relevant data for decision-making. Testing multiple rooms gives you a more complete map of the house, but for starting purposes, one monitor in the right location is more important than ten monitors placed casually around the house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "I've been following my radon numbers for two years and I'm kind of addicted to the app. Is this normal?", "answer": "Completely normal for a certain type of person - and honestly, that kind of engagement means you have excellent long-term data. The patterns you've observed over two years are far more useful than a single short-term test. As long as you're not making yourself anxious over normal daily fluctuations, monitoring closely is a good thing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My radon guy said I have \"communication\" in my slab. What does that mean?", "answer": "Slab communication means that when a vacuum is applied at one suction point, pressure changes are detectable throughout the sub-slab material - which means air (and radon) can move freely through the gravel or material beneath your floor. Good communication is actually a positive finding for mitigation: it means one well-placed suction point can cover a large area effectively.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "The radon contractor said my slab has poor communication and I need multiple suction points. Is that code for \"I'm going to charge you more\"?", "answer": "Poor communication is a real technical condition - it means the sub-slab material is dense or clay-heavy and doesn't allow suction to spread easily. Multiple suction points in that scenario are genuinely needed for effective mitigation, not a upsell. A reputable contractor should demonstrate this with a diagnostic test before recommending additional points. It's fair to ask them to show you the communication test results.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "I had a mitigation system put in and the contractor said I don't need to test again. Is that right?", "answer": "Always retest after mitigation. That's how you confirm the system is working and by how much it reduced your levels. A conscientious contractor will typically recommend a retest 24 to 48 hours after installation. If yours didn't, retest yourself with a short-term kit or continuous monitor. Don't assume it worked without verifying.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "My mitigation system has been in for 6 months and my monitor now reads 0.4. Is that too good to be true?", "answer": "0.4 pCi/L is an excellent post-mitigation result and is well within what a well-functioning system can achieve. It's not too good to be true - sub-slab depressurization systems, when properly installed and the right suction is achieved, can bring levels down near outdoor background. Keep monitoring periodically to make sure the fan is still running and levels stay down.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "More Oddball and Miscellaneous", "question": "I got a mitigation system and my radon went from 9 to 0.9. My brother-in-law says it must be broken because that's \"too much of a drop.\" Your thoughts?", "answer": "It's not broken - that's what a well-designed system does. Sub-slab depressurization creates negative pressure under the slab, intercepts radon before it enters the house, and vents it outdoors. Drops from high single digits to below 1.0 pCi/L are common and expected with a properly installed system. Your brother-in-law's intuition about what's possible is off. The system is working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pregnancy, Kids, and Sensitive Populations", "question": "I'm pregnant and just found out my basement radon is 6.8 pCi/L. Should I be panicking?", "answer": "You don't need to panic, but you should act promptly. Radon is a long-term cumulative risk - it doesn't cause acute harm to a pregnancy. Even so, there's no reason to delay mitigation, and 6.8 pCi/L is well above the EPA action level. Get a mitigation system scheduled and stay out of the basement in the meantime if possible. For any specific concerns about the pregnancy, your OB is the right person to talk to.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pregnancy, Kids, and Sensitive Populations", "question": "I'm trying to get pregnant. Should I worry about radon before we conceive?", "answer": "Radon's established risk is lung cancer from long-term inhalation - it's not a known cause of fertility problems or birth defects. Even so, creating the healthiest possible home environment before a baby arrives is a reasonable goal, and addressing elevated radon is part of that. If your levels are above the EPA action threshold, now is a good time to handle it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pregnancy, Kids, and Sensitive Populations", "question": "My elderly mother lives in the basement apartment. She's 79. Does age change the radon risk?", "answer": "The lung cancer risk from radon is cumulative over a lifetime of exposure. At 79, your mother has fewer remaining years of exposure ahead of her, but prolonged daily exposure in a high-radon space still adds risk, and older adults may have less lung resilience. If the space reads above 4.0 pCi/L, mitigation is still worthwhile and is the right thing to do.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pregnancy, Kids, and Sensitive Populations", "question": "My son has asthma. Is radon worse for him?", "answer": "Radon causes lung cancer specifically through radiation - it doesn't trigger asthma attacks or cause acute respiratory symptoms. However, if your son's asthma is already affecting his lung health, any additional long-term lung risk is worth minimizing. Mitigation at elevated radon levels is a reasonable step regardless, and it's a good way to protect him going forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pregnancy, Kids, and Sensitive Populations", "question": "We're adopting and the adoption agency asked if our home has been radon tested. Is that a standard question?", "answer": "Some adoption agencies - particularly for international adoption or newborn placements - include radon testing in their home study requirements, especially in high-radon states. It's a legitimate safety question. A test, and mitigation if needed, is an appropriate step to demonstrate you're providing a safe environment for the child.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Pregnancy, Kids, and Sensitive Populations", "question": "My kids' school is in the basement of an old church. Should I be asking the school about radon?", "answer": "Yes, that's a completely reasonable thing to ask about. Schools - especially those using below-grade spaces regularly - should be testing for radon, and EPA has guidance specifically for schools. A parent asking whether the space has been tested and what the results were is a fair and appropriate question to bring to school administration.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Myths Worth Busting", "question": "I heard you can neutralize radon with baking soda. Is that a thing?", "answer": "No. Radon is a radioactive noble gas - it doesn't react with household chemicals. Baking soda has no effect on radon whatsoever. The only reliable ways to reduce indoor radon are ventilation and sub-slab depressurization.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Myths Worth Busting", "question": "My uncle says eating lots of antioxidants will protect you from radon. Is there any science behind that?", "answer": "There's no evidence that dietary antioxidants protect against radon-induced lung cancer. The mechanism of radon exposure is alpha radiation from decay products in lung tissue - diet doesn't intercept that process. Your uncle means well, but antioxidants aren't a substitute for addressing the radon level itself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Myths Worth Busting", "question": "I saw a \"radon-blocking paint\" at the hardware store. Does that work?", "answer": "Radon-blocking or radon-resistant paints are marketed as a way to seal basement walls, and they can reduce some radon seeping through porous concrete walls. However, walls are typically a secondary entry point compared to floor penetrations and slab cracks. Paint alone is not a mitigation system and won't reliably solve an elevated radon problem. It may help as a supplemental measure but don't count on it as the fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Myths Worth Busting", "question": "I heard that zeolite crystals absorb radon. Is that true?", "answer": "Zeolite does have some capacity to absorb radon under laboratory conditions, and it's been studied for radon capture. But using zeolite in a home as a practical radon reduction strategy is not established or validated for real-world use. A sub-slab depressurization system is what actually works in a home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Myths Worth Busting", "question": "Can I use activated charcoal bags around the basement to reduce radon?", "answer": "Activated charcoal used in short-term test kits passively adsorbs radon for the purpose of measurement, but those are designed to absorb radon in small, controlled amounts for testing - not to continuously scrub a basement's air. The volume of air in a basement is far too large for charcoal bags to provide meaningful ongoing protection. Don't rely on them for reduction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Myths Worth Busting", "question": "My neighbor runs a HEPA air purifier and says his radon went down. Is the purifier doing that?", "answer": "HEPA filters remove particles, not gases. Radon is a gas, so a HEPA filter has no direct effect on radon concentration. What might be happening is that the purifier is removing radon decay products (which attach to dust particles), which can modestly reduce the lung dose even if radon concentration stays the same. But it's not solving the underlying radon level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Myths Worth Busting", "question": "Someone online told me to put my mitigation pipe outlet underground so the radon goes back into the soil. Is that a thing?", "answer": "Please do not do that. Radon exhausted from a mitigation system needs to vent to the outdoor atmosphere - above the roofline or at least well away from windows and entries. Sending it back underground would just recirculate it into the sub-slab and right back into the house. The whole point is to move it into open air where it disperses harmlessly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Myths Worth Busting", "question": "A YouTube video said I could fix radon by drilling holes in my basement walls to \"let it escape.\" Does that work?", "answer": "No. Drilling holes in walls without connecting them to a fan-driven exhaust system accomplishes nothing useful and may actually create more entry pathways for soil gas. Sub-slab depressurization works because a fan creates negative pressure under the slab, pulling radon toward the pipe rather than into the house. Random wall holes don't do that.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Radon Myths Worth Busting", "question": "I read that playing loud music in the basement stirs up the air and reduces radon. Is that a thing?", "answer": "No, that's not a thing. Sound waves don't move enough air volume to meaningfully dilute radon. Ventilation - actual air exchange with the outdoors - is what reduces concentration. A speaker system is not an air exchange system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Foundation Types and Construction Scenarios", "question": "My house has a basement under part of it and a crawl space under the rest. Which do I test?", "answer": "Test both if you can, because they're different environments that can have different radon levels. At minimum, test the spaces where people spend time - if the basement is used as living space, that's the priority. The crawl space reading matters too because radon from it can migrate into the main floor above.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Foundation Types and Construction Scenarios", "question": "My house has an old stone foundation with no slab. Can it even be mitigated?", "answer": "Yes, but it's more complex than a poured concrete slab situation. Stone foundations have many irregular gaps and pathways. Crawl space depressurization, soil barrier installation, and block wall pressurization are techniques used for these situations. It's worth having a mitigation contractor walk through the specifics of your foundation - the approach needs to be customized.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Foundation Types and Construction Scenarios", "question": "My house is a split-level. Where do I test for radon?", "answer": "Split-level homes have multiple floor levels at different grades. You should test the lowest level that's in contact with the ground or below grade - typically the lower split that sits at or below grade on one side. If that level is used living space, it's the priority. The radon dynamics of a split-level can be a bit complex; a mitigation contractor familiar with them can help if levels are elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Foundation Types and Construction Scenarios", "question": "My basement has radiant floor heating. Does that affect radon mitigation?", "answer": "Radiant floor systems embedded in or under the slab can complicate sub-slab depressurization because you can't drill through tubing zones without damaging the system. A mitigation contractor needs to know about radiant floors before beginning work so they can locate suction points that avoid the tubing. It's doable - it just requires more planning.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Foundation Types and Construction Scenarios", "question": "I have a finished basement with an epoxy floor. Can they still install a mitigation system?", "answer": "Yes. Epoxy floor coatings don't prevent sub-slab depressurization. The contractor can core-drill through the epoxy and concrete to access the sub-slab material. The hole is small and can be patched around the pipe. The epoxy coating itself may actually be helping slightly by reducing radon entry through the slab surface.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Foundation Types and Construction Scenarios", "question": "My basement has been waterproofed with an interior coating system. Does that affect radon?", "answer": "Interior waterproofing coatings (like DryLok-type products) can slightly reduce radon entry through porous concrete walls. But they don't address the primary entry points - floor slab cracks, the floor-wall joint, and penetrations. A waterproofed wall is a minor improvement, not a mitigation strategy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Foundation Types and Construction Scenarios", "question": "My house has a basement that was converted into a second unit. The new tenants are complaining about radon. Who fixes it?", "answer": "The property owner is responsible for the building environment, including radon in a rented space. A tenant can raise the concern, but remediation is the owner's responsibility. Many states have landlord obligations around habitability that may apply. Test the unit first to establish the actual level, then address mitigation as the owner.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Foundation Types and Construction Scenarios", "question": "I have an in-ground swimming pool in my backyard right next to the house. Could it affect radon?", "answer": "In-ground pools involve significant soil displacement and can alter drainage patterns around the foundation, but they're not a radon source. The soil composition under your home is what drives radon, not the pool. The pool's presence near the foundation is not a radon concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "People's Very Specific Worries", "question": "My radon monitor is showing 3.9 pCi/L. My wife says that's basically 4 and we need to do something. I say we're fine. Who's right?", "answer": "Your wife has the more defensible position. The EPA action level of 4.0 pCi/L is a guideline threshold, not a cliff edge - 3.9 is not meaningfully different from 4.0, and both reflect real risk. The EPA also says levels between 2.0 and 4.0 are worth considering for mitigation. Whether you act at 3.9 is your call, but it's not a number to be complacent about.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "People's Very Specific Worries", "question": "I keep arguing with my husband about whether to fix the radon. He says it's not real. What do I say?", "answer": "Radon is the second leading cause of lung cancer in the U.S., behind only cigarette smoking, according to the EPA - accounting for an estimated 21,000 deaths per year. It's not a theory or a scare tactic. It's a well-documented radioactive gas that's measurable, real, and fixable. Test the home if you haven't, and let the number speak for itself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "People's Very Specific Worries", "question": "I asked three different radon guys and got three wildly different estimates for mitigation. How do I know who to trust?", "answer": "Get written scope descriptions from each, not just prices. Confirm each contractor is state-certified. Ask what suction point locations they're proposing and why, what the expected pressure differential will be, and whether they include a post-installation test. The cheapest bid with a vague scope is often not a good deal. The contractor who can explain what they're doing and why is usually the right choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "People's Very Specific Worries", "question": "My contractor installed the mitigation pipe but forgot to put in the fan. The pipe is just open into the attic. Is that working?", "answer": "A passive radon pipe without a fan relies on natural stack-effect pressure differences to draw air upward - it provides some benefit but is much less effective than an active system with a fan. Whether it's meaningfully reducing your levels depends on your specific conditions. Test with a monitor to see where your levels are, and if they're still elevated, adding the fan (an easy retrofit) will significantly improve the system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "People's Very Specific Worries", "question": "My mitigation system was installed by my general contractor, not a radon specialist. Should I be worried?", "answer": "Radon mitigation is a specialized skill, and many states require contractors to be certified for it. A general contractor without radon training can install a pipe that looks right but misses critical details - suction point placement, proper sealing, outlet location relative to windows. Have a certified radon specialist evaluate the installation and run a post-mitigation test. If it's working, great. If not, you'll want it corrected.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "People's Very Specific Worries", "question": "I found a radon pipe in my house that I never knew was there. Does that mean the house was already mitigated?", "answer": "It might. Previous owners may have had a system installed without disclosing it. Check if there's a fan (usually in the attic or on the exterior) connected to the pipe. If a fan is present and running, you may have a functioning passive or active system. Test with a monitor to confirm whether it's actually keeping levels down.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "People's Very Specific Worries", "question": "My house was mitigated before I bought it and the seller said it worked. I've never tested since. Should I?", "answer": "Yes. A mitigation system installed years ago may have had its fan degrade, the suction point seal shift, or conditions in the sub-slab change. A one-time post-mitigation test from the previous owner tells you what the system did at that moment - not what it's doing today. A current test with a continuous monitor or fresh short-term kit is worth doing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "People's Very Specific Worries", "question": "The house I'm buying has a radon system but the fan is making a grinding noise. Is that important?", "answer": "Yes. A grinding noise indicates the fan is failing. A failed fan means the system is not working. Budget for a fan replacement immediately after closing, and factor it into your negotiations if the seller isn't addressing it before closing. Fan replacement is typically straightforward and affordable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "People's Very Specific Worries", "question": "I turned off my mitigation fan for the winter to save electricity. Was that a bad idea?", "answer": "That was a mistake. The fan uses very little electricity - most residential radon fans draw less than 100 watts continuously, which costs just a few dollars a month. Turning it off eliminates the pressure differential under the slab and allows radon to accumulate. Turn it back on and retest after a few days to confirm your levels are back down.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "Is there a radon problem in Antarctica or the North Pole?", "answer": "Radon is present everywhere on Earth to some degree since uranium exists in rocks globally, but in those regions with frozen, snow-covered ground, natural ventilation is extreme and radon doesn't accumulate indoors the way it does in temperate homes. It's not a practical health concern in those environments. Your house in the Midwest is a different story.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "Can radon travel through the mail?", "answer": "Radon gas doesn't stay trapped in an envelope or package - it disperses rapidly into whatever air surrounds it. Short-term test kits are specially sealed to capture and retain radon for lab analysis. Regular mail doesn't carry radon in any meaningful way.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0236", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "My Geiger counter clicks more in my basement than upstairs. Is that radon?", "answer": "A Geiger counter does detect radiation, and radon decay products emit alpha and beta particles that a sensitive counter might pick up. However, a Geiger counter isn't a radon monitor - it detects many forms of radiation and can't tell you the radon concentration in pCi/L. The correlation is interesting and could be consistent with elevated radon, but you need an actual radon test to know your level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0237", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "I bought a radon test kit in 2018 and never used it. Is it still good?", "answer": "Charcoal canister test kits have a shelf life - typically one to two years from manufacture. A kit from 2018 is well past its usable life. The charcoal may have already adsorbed ambient material from storage conditions, and the lab calibration assumes fresh charcoal. Get a new kit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0238", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "My house is next to a nuclear power plant. Does that cause radon?", "answer": "Nuclear power plants don't emit radon in normal operation. The radon in your home comes from uranium naturally present in the soil immediately under and around your foundation. Proximity to a nuclear plant is unrelated to residential radon levels.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0239", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "My radon company wants to come back every year for \"maintenance.\" Is that necessary or is it a sales tactic?", "answer": "Annual service visits are marketed by some companies, but they're not universally necessary. The two things worth checking periodically are: (1) whether the fan is still running, and (2) what your current radon level is. You can do the second one yourself with a continuous monitor or a periodic retest kit. If the fan sounds normal and your radon is still low, you don't necessarily need an annual service call - though having someone check the fan seal and system integrity every few years is not unreasonable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0240", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "My neighbor said radon only matters if you have a basement. I have a crawl space. Am I in the clear?", "answer": "No. Crawl spaces are a significant radon entry pathway. Soil gas enters the crawl space and migrates upward into the living area through flooring gaps and penetrations. Homes with crawl spaces test high for radon regularly. You're not in the clear - crawl space homes absolutely need to be tested.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0241", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "My friend says her radon is 0.2 pCi/L and mine is 3.8 pCi/L and she lives two streets away. How can that be?", "answer": "Radon levels vary enormously at the micro-scale - soil composition, foundation construction, how well sealed each home is, ventilation rates, and even small differences in lot elevation all affect the number. Two houses two streets apart sitting on the same geological formation can have dramatically different radon levels. That's exactly why every home needs its own test. Your neighbor's low result tells you nothing about your house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0242", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "I'm a heavy reader and I spend 4 hours every night in my basement office. My radon is 3.5. Should I mitigate?", "answer": "At 3.5 pCi/L and four hours per night of daily exposure, you're accumulating more dose than the typical homeowner who visits the basement occasionally. The EPA says 2.0 to 4.0 pCi/L is worth considering for mitigation - and your usage pattern tips the scale toward action. It's worth doing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0243", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "My basement radon is 1.2 pCi/L. Can I stop worrying?", "answer": "1.2 pCi/L is a low reading and well below any action threshold. You don't need to take action at that level. Radon has no level with zero risk, but 1.2 represents a very modest exposure. Keep a monitor running so you'd notice if conditions change over time, and revisit the question if you significantly seal or renovate the basement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0244", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "I found my radon monitor in the garbage disposal box after moving and it's been off for 6 months. Oops. What now?", "answer": "Just restart it in the right location. The data gap doesn't tell you anything useful, but the device itself is fine - being powered down doesn't damage most radon monitors. Give it 48 to 72 hours to collect a fresh baseline before drawing conclusions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0245", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "My radon monitor is in the basement and my wife's reading a different number on her phone than I'm reading on the screen. Which is right?", "answer": "Most monitors display a recent short-period average on the screen and the app may show a different time average - or the app might be caching older data if the device hasn't synced recently. Pull the app down to refresh and confirm it's showing real-time data. The device screen is usually showing the most current reading; the app number is typically the longer average.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0246", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "Can I put a radon monitor in a safe or vault?", "answer": "A closed safe or vault would have severely restricted airflow - you'd be measuring the concentration inside a sealed metal box, not the room. That's not a useful test location. Also, locking a radon monitor in a vault seems like it defeats the purpose of having one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0247", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "I'm an overthinker and I've been testing my basement every month for 3 years. Am I being excessive?", "answer": "You have an unusually good dataset, and that's genuinely useful. Three years of monthly readings give you a better picture of seasonal variation, weather response, and long-term trends than almost any single test. As long as you're making rational decisions based on the averages and not getting anxious about individual daily spikes, this is a feature, not a problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0248", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "My basement radon averages 2.7 but spiked to 11 during a thunderstorm. Should I adjust my behavior during storms?", "answer": "Knowing that your basement spikes during storms is useful contextual information. You might choose to minimize basement time during active storm systems, and you should definitely make sure storm-related slab cracks aren't opening up entry points. But a storm spike with a 2.7 average baseline doesn't require major action - keep monitoring, and if your long-term average creeps upward, that's the more important signal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0249", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "My radon test kit sat in my car for a week in the summer. The car was hot. Is the kit still good?", "answer": "Heat can degrade the charcoal in short-term test kits and compromise the results. A week in a hot car - potentially 120 to 140 degrees inside on a summer day - is outside the normal storage range for most kits. Get a fresh kit and store it at room temperature until you're ready to deploy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-oddball-rambling-0250", "phase": "phase3", "type": "answered_qna", "topic": "workflow-oddball-rambling", "category": "workflow-oddball-rambling", "subtopic": "Miscellaneous Rambling Questions That Don't Fit Anywhere Else", "question": "I've been reading about radon for six months and I still can't figure out if I should be scared. What's the actual bottom line?", "answer": "The bottom line is this: test your home, and let the number tell you what to do. Below 2.0 pCi/L, you can relax. Between 2.0 and 4.0, you have a real but manageable risk and mitigation is worth considering. Above 4.0, fix it - the system works, it's not disruptive, and it lasts. Six months of reading is interesting, but the number from your own test is the only thing that answers the question for your home. If you want help thinking through what the number means, give us a call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/oddball-rambling.md", "public": true, "tags": [ "workflow-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "Where should I put my radon monitor?", "answer": "The best place is the lowest livable level of your home - meaning the lowest floor where you or your family actually spend time. If you have a finished basement where people sleep, work, or hang out regularly, start there. The goal is to measure the air your family is actually breathing, not the air in a storage closet nobody enters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "I just bought a radon monitor. Where exactly do I put it in my basement?", "answer": "Find a spot that's away from windows, doors, exterior walls, and vents. Pick somewhere central if you can - a table, desk, or shelf works well. You want the air around it to be representative of the whole space, not just the corner that gets a cross-breeze every time the door opens.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "Should the monitor be on the floor or elevated?", "answer": "Elevated is better. Most testing guidelines recommend placing a monitor somewhere between 2 and 6 feet off the floor - roughly breathing height when you're sitting or standing in the room. Radon does tend to settle a bit, but floor-level readings can be artificially high or influenced by dust and concrete off-gassing in ways that aren't truly representative of what you're inhaling throughout the day.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "How high off the floor should a radon monitor be?", "answer": "Somewhere between 2 and 6 feet is the commonly accepted range. The idea is to capture air at breathing height - not so low you're measuring what's pooled right at the slab, and not so high you're testing the air near the ceiling where you never spend time. A desk, nightstand, or shelf in that range works well.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "Can I put a radon monitor on a shelf?", "answer": "Yes, a shelf is actually a good spot as long as it's in the right height range and away from exterior walls and windows. Just make sure there's decent air circulation around the monitor - don't shove it in the back corner behind a bunch of stuff where air can't move freely around it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "Does it matter what direction the monitor faces?", "answer": "For most consumer and professional monitors, the orientation doesn't matter much - the sensor draws in air from the surrounding environment regardless. Just don't lay it flat if the instructions say to stand it upright, and make sure nothing is blocking the intake vents on the device itself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "Should the monitor be near an outside wall or an inside wall?", "answer": "Inside wall is better. Exterior walls can create slightly different air patterns from temperature differentials, and you want the reading to reflect the general air in the room rather than air that's being affected by the wall itself. Center of the room or along an interior wall gives you a more representative picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "My basement is really big. Does it matter which end I put the monitor?", "answer": "If your basement is large enough that it has distinct zones - say, one end is finished and one is unfinished - you'd ideally test the zone where people spend time. A single monitor in a massive basement can only tell you about the air where it's sitting. If you're concerned about the whole space, you might consider testing different areas at different times.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "Can I move the monitor around to test different spots, or does it need to stay put?", "answer": "For a valid long-term average reading, the monitor should stay in one spot. Moving it around during the test period gives you a jumbled average that doesn't tell you much about any single location. Run the test in one place, get a solid number, then if you want to understand another area, run a separate test there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "I put my monitor in the basement last week and moved it twice to clean. Does the test still count?", "answer": "Brief moves of a few minutes to clean around it probably didn't ruin your data, especially on a long-term monitor that averages over weeks. But if it was moved to a different room or an area with very different conditions, the reading is less reliable. For a true picture, stability matters - try to leave it undisturbed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "Should I put my radon monitor under the stairs?", "answer": "Under the stairs can work if it's in a somewhat open area, but avoid tucking it into a completely enclosed cubby where air doesn't circulate well. Radon monitors need to sample the ambient air in the space, and a dead-air pocket under closed-in stairs can give you artificially elevated readings that don't reflect what's happening across the whole room.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "My basement has a lot of stuff in it. Does clutter affect where I put the monitor?", "answer": "It can. Dense clutter creates pockets of still air, and a monitor buried among boxes might be reading a microenvironment rather than the room as a whole. Find the most open area you can - a workbench, a cleared shelf, somewhere with decent air circulation - and test there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "I want to test my upstairs too. Should I put a second monitor on the main floor?", "answer": "That's a reasonable thing to do, especially if someone sleeps on the main floor. The EPA recommends testing the lowest livable level first since that's typically the highest concentration, but if you have specific concerns about the main floor, a separate test there is perfectly valid.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "Can I run two monitors at the same time, one upstairs and one downstairs?", "answer": "Yes, and that can actually give you useful information. You'll almost always see higher numbers in the basement and lower numbers as you go up, but knowing how much lower helps you understand how the gas is moving through the house. Just keep each monitor in place for the full test duration.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "Should I put the monitor in the part of the basement I use most or in the worst-case spot?", "answer": "The part you use most. The whole point of testing is to understand the exposure risk for the people living in the home. If you spend 8 hours a day in a finished corner of the basement, test there - not in the far mechanical room where nobody goes. Exposure is about time spent plus concentration level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "My basement has a finished side and an unfinished side. Which one do I test?", "answer": "Test the finished side if people spend time there. If the unfinished side is adjacent and shares open air with the finished area, the air is probably mixing anyway. If they're separated - for example, the finished area is drywalled off from the utility space - test where people actually are.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "I read somewhere that you should test in the worst-case spot. Isn't the floor the worst case?", "answer": "The intent of testing is to measure occupant exposure, not the theoretical maximum radon level in the house. The EPA's guidelines focus on where people spend time. Testing on the floor or in a sealed utility closet might give you a scarier number but it doesn't actually represent what the family is breathing. Test at breathing height in occupied areas.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "Does it matter if my basement gets really cold in winter? Does that affect where I put the monitor?", "answer": "Temperature swings can slightly affect some monitor types, but the bigger issue is that very cold air from a drafty window or an open hatch can artificially dilute readings near that source. Keep the monitor away from those cold drafts and let it measure the general room air. Most modern monitors handle normal residential temperature ranges fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "I have a basement workshop. Should the monitor be in the workshop or in the adjacent family room?", "answer": "Test both if you can, but start with wherever you spend the most time. If you're in that workshop for several hours a day sanding or building, the air you're breathing there matters a lot. Don't assume the family room is representative of the workshop - they may have different airflow patterns.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Where to Put the Monitor - General Placement", "question": "How long does a monitor have to sit in one spot before the reading is reliable?", "answer": "For a short-term test (the disposable charcoal canisters), 48 to 96 hours is typical. For electronic continuous monitors, many will give you a rolling average that becomes more reliable over days and weeks. Radon levels fluctuate daily, so a longer averaging period gives you a more meaningful number than a single snapshot.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "How far from a window should I keep the radon monitor?", "answer": "Generally at least a few feet - some guidelines say keep it at least 20 inches from windows and exterior walls. The concern is that an open window will dilute readings with outdoor air that has very low radon, giving you a falsely low result. Even a closed window area can have some air movement in winter. Get the monitor into the interior of the room.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "I only have one window in my basement. Does that change where I place the monitor?", "answer": "It means you have one direction to avoid. Place the monitor on the opposite side of the basement from that window, and try not to leave the window open during the test period. The idea is to measure the steady-state air quality of the space, not air that's been freshly ventilated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "My basement door to the backyard is always cracking open. Does that affect my test?", "answer": "Yes, that kind of regular air exchange can significantly lower your readings and make the basement look better than it really is during sealed conditions. If possible, keep that door closed during your test period. Testing with the house in its normal closed condition gives you the most honest picture of chronic radon exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "Can I put my radon monitor near an HVAC vent?", "answer": "Avoid it. HVAC vents can blow air across the monitor sensor, creating an artificial reading - either too high if the system is pulling air from a high-radon area, or too low if it's diluting the local air. Stay at least a few feet from supply and return vents. The monitor should be measuring ambient room air, not duct air.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "What about near the furnace? Is that okay?", "answer": "Not ideal. The furnace area tends to have its own airflow patterns - combustion air, draft from flues, and pressure fluctuations - that can throw off the reading. Put the monitor in a living area of the basement, away from the mechanical equipment, for the most representative result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "I have a really small basement and the HVAC return is basically right there. What do I do?", "answer": "Do your best to get the monitor on the opposite side of the room from the return, even if \"opposite side\" is only 6 feet away. If the space is truly tiny and unavoidable, note the placement when you interpret your results. A reading taken close to an HVAC return may be somewhat underestimated due to dilution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "Should I keep the monitor away from the dehumidifier?", "answer": "Yes. A dehumidifier pulls a lot of air through it and can create a local air circulation pattern around itself. If your monitor is sitting right next to a running dehumidifier, it may be reading a biased sample. Give it some distance - a few feet at minimum - so it's reading the general room air rather than the dehumidifier's intake zone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "My basement dehumidifier runs constantly in summer. Do I need to turn it off to test?", "answer": "You don't have to turn it off, but you should move the monitor away from it. Normal household use of a dehumidifier - including running it during the test - is fine, because that's the real-world condition. Just don't test right next to it where the airflow from the unit is dominating the sample.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "Can I put the monitor near a floor drain?", "answer": "A floor drain that's connected to a sump or open soil can actually be a radon entry point, so placing the monitor near one might give you a locally elevated reading. That might be useful if you're specifically trying to understand if the drain is contributing to the problem, but for an overall room average, pick a more central location.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "I have a sump pit in my basement. Should my monitor be near the sump?", "answer": "Near the sump is not ideal for a whole-room measurement. The sump pit can be a significant entry point for radon, and a monitor right next to it will pick up concentrated gas before it disperses through the room. If you want an overall average, move it away from the sump. If you're specifically trying to evaluate whether the sump is contributing heavily, a reading near it can be informative - but keep that context in mind.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "Can I put the monitor right on top of the sump pit lid?", "answer": "That would give you a very concentrated, localized reading right at the source - not a useful measure of what your family is breathing throughout the basement. The reading would likely be higher than the general room air and might send you into unnecessary alarm. Test in the general living space instead.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "My sump pump runs all the time. Does that affect radon readings?", "answer": "A running sump pump means water is moving, which can disturb the air-water interface in the pit and potentially push more radon out. It's worth knowing that the pit is active during your test, because it may mean your readings are actually reflecting a real ongoing condition - not a worst case you'd never see in practice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Distance from Windows, Vents, and Doors", "question": "I closed all my windows for the test but my basement has one of those small hopper windows that doesn't seal great. Does that ruin my results?", "answer": "A slightly leaky window introduces some uncertainty but doesn't necessarily ruin the test. It just means your result might be slightly lower than true sealed-house conditions. If your test comes back elevated, take that seriously. If it comes back low near a poorly sealed window, you might want to do a second test with windows well-sealed to feel more confident.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Room Placement Questions", "question": "Can I put a radon monitor in the basement bathroom?", "answer": "You can, but it's not the best choice. Bathrooms tend to have exhaust fans that change the air frequently, and the room itself is often isolated and sealed. It's not where people spend extended time. The monitor is better placed in a room where actual time is spent - a bedroom, family room, or office area.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Room Placement Questions", "question": "Can I put a monitor in the basement laundry room?", "answer": "The laundry room has some downsides as a test location - the dryer exhaust moves a lot of air, and the machines themselves may affect temperature and humidity. If the laundry room is the only below-grade space, test there, but keep the monitor away from the dryer vent area and try to get it to represent the general air rather than the dryer's exhaust zone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Room Placement Questions", "question": "Should I put a monitor in my kids' basement bedroom?", "answer": "Absolutely yes - that should probably be the first place you test. If your kids are sleeping 8 to 10 hours a night in a basement bedroom, that's a lot of cumulative exposure time. Radon exposure risk adds up over years, so understanding what they're breathing while they sleep is exactly why you test. That's the most important room in the house to know about.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Room Placement Questions", "question": "My teenager sleeps in the basement. I'm kind of worried now. What level is considered an issue?", "answer": "The EPA recommends fixing at 4.0 pCi/L or higher. For levels between 2.0 and 4.0 pCi/L, the EPA says the risk is lower but still real enough to consider fixing, especially in a room where someone is sleeping regularly. Get the test done and then you'll actually know where you stand instead of guessing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Room Placement Questions", "question": "My home office is in the basement. Should I put the monitor there?", "answer": "Yes, that's a smart choice. If you're working down there for several hours a day, that accumulated time matters. The basement office is exactly the kind of use case where a high reading translates to real elevated exposure for a real person.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Room Placement Questions", "question": "Can I put the monitor in a basement closet?", "answer": "A closet is a poor choice - air doesn't circulate well in a closed space and you'll likely get a reading that doesn't represent what you're breathing in the room. Put it in the open, livable area of the basement instead.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Room Placement Questions", "question": "I want to put the monitor in the basement gym. Any issues with that?", "answer": "The gym is fine as a placement location, as long as you're not putting it right in front of a fan or air movement source. If you have a large fan running constantly during workouts, try to position the monitor where it's measuring the ambient air rather than the direct fan output. The gym is actually a great room to test if you spend a lot of time working out down there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Room Placement Questions", "question": "My basement has a finished bedroom but we mainly hang out in the adjacent family room. Where should I test?", "answer": "Test the family room since that's where you spend the most time. If the two spaces share open air, one test in the main living area is probably sufficient. If the bedroom is sealed off with a door and people sleep there, you might want a second test for the bedroom specifically, since nighttime hours add up fast.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Room Placement Questions", "question": "Can I put the monitor in an unfinished utility area if that's the only basement space I have?", "answer": "If that's your only below-grade space, then yes, test there - it's still telling you important information about the radon entering the home. Just don't place it right on top of the sump pit or directly next to the furnace. Find the most central, open spot in the utility area and test from there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Room Placement Questions", "question": "I want to test my basement but I also use the main floor living room a lot. Which floor matters more for testing?", "answer": "The basement almost always has higher radon concentration since it's closest to the ground where radon enters. Test there first. If your basement comes back elevated and you get mitigation, the main floor levels usually drop too. You can test the main floor separately, but the basement is the priority.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "How do I test for radon if I have a crawlspace instead of a basement?", "answer": "If your house has a crawlspace and no basement, you test on the lowest livable floor - typically the first floor. Radon enters through the crawlspace and then migrates into the living areas above. Place the monitor on the first floor of the home, away from exterior walls and windows, and at breathing height. That's your primary exposure point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "Should I put my monitor in the crawlspace itself?", "answer": "No. The crawlspace is the pathway, not where you live. Testing inside the crawlspace would give you information about concentrations before the gas disperses into the home, but it doesn't tell you about what the family is breathing. Test on the lowest occupied floor above the crawlspace.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "I have a vented crawlspace. Does that mean I have less radon risk?", "answer": "Not necessarily. Vented crawlspaces were designed primarily for moisture control, and the theory was that outdoor air cycling through would dilute radon. In practice, venting doesn't always work reliably - ventilation can be inconsistent depending on wind direction, and the radon can still make its way into the living space above. You still need to test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "My crawlspace has vents all around. My neighbor said I don't need to worry about radon because of the vents. Is that true?", "answer": "That's a common misconception. Vent venting helps with moisture, but it's not a radon control system. Radon can still accumulate under the crawlspace and migrate upward into the home through gaps in the floor. Test the first floor of your home and let the actual number tell you whether you have an issue, not an assumption about the vents.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "I have an unvented crawlspace. Is radon more of a risk?", "answer": "An unvented or encapsulated crawlspace can sometimes concentrate radon under the floor if it's not paired with a proper sub-membrane depressurization system. Encapsulation for moisture control is a good thing, but if you sealed the crawlspace without addressing radon, you may have inadvertently created conditions that funnel more gas upward. Test the first floor and see where you stand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "How does radon get into a house from a crawlspace?", "answer": "Radon comes up from the soil, same as with any foundation type. In a crawlspace home, it enters the crawlspace through the bare soil or through the foundation walls, then finds its way into the house through gaps in the subflooring, holes where pipes and wires pass through, and cracks in the rim joist area. Once in the living space, it mixes with the indoor air your family breathes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "My crawlspace has a vapor barrier on the ground. Does that help with radon?", "answer": "A vapor barrier helps with moisture significantly, but a basic poly sheeting vapor barrier does relatively little to block radon. Radon gas can permeate many materials and will work its way around seams and gaps. A true radon-resistant design requires not just a barrier but a suction system underneath it to depressurize the soil. A barrier alone is not a radon fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "Can radon seep through the vapor barrier in a crawlspace?", "answer": "Yes, it can get through imperfect laps, seams, and penetrations. Even relatively thick poly can allow some radon through. The barrier slows gas movement a bit but isn't a sealed barrier against radon the way it would be against bulk water. Depressurization under the barrier is the reliable solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "I can barely get into my crawlspace. Can I reach it to test for radon?", "answer": "You don't need to test inside the crawlspace itself. The relevant test is the air in your first-floor living space, which you can access easily. Crawlspace access only becomes relevant during mitigation work, when a contractor would need to get in there to install the depressurization system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "My crawlspace is like 12 inches high. Do mitigation contractors actually go in there?", "answer": "Most experienced contractors have worked in very tight crawlspaces. There are ways to run a depressurization system even in a very low crawlspace - it usually involves routing the suction pipe through the floor or along the foundation wall rather than requiring a person to crawl through the entire space. It's tight work but it's doable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "My house is on a crawlspace and the first floor tested at 3.5 pCi/L. Is that from the crawlspace?", "answer": "Almost certainly, yes. In a crawlspace home, the crawlspace is the primary radon pathway into the living area. A 3.5 pCi/L result on the first floor is meaningful - the EPA says levels between 2.0 and 4.0 are worth considering mitigation because the risk is real even if it's below the 4.0 action level. I wouldn't ignore that number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "My crawlspace home tested at 6.2 pCi/L on the first floor. Is that high?", "answer": "Yes, that's above the EPA's action level of 4.0 pCi/L. A 6.2 on the first floor of a crawlspace home indicates the crawlspace is doing a poor job of separating soil gases from your living area. Mitigation - typically sub-membrane depressurization under the vapor barrier - is the right move here.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "What does mitigation look like for a crawlspace home?", "answer": "For a crawlspace, the typical solution is sub-membrane depressurization - a suction pipe runs under the vapor barrier (or through the soil if no barrier exists), connects to a fan, and exhausts the radon to the outdoors. If there's no vapor barrier, adding one is usually part of the process. It's analogous to what's done under a slab, but adapted for the crawlspace.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "My house has both a crawlspace and a partial basement. Where should I test?", "answer": "Test the basement first - it's typically closest to the soil and tends to have higher concentrations. Also test the first floor above the crawlspace section. If you have two distinct foundation types, you may get different readings in different parts of the house, and a mitigation contractor may need to address both zones.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "I have both a crawlspace and a partial basement. Do I need two separate radon systems?", "answer": "Possibly. If the basement and the crawlspace sections of the house share open air, a single mitigation system might address both. If they're separate zones - different foundation depths, walls between them - you may need two suction points or two separate systems. A good contractor will assess the structure and tell you what's needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "My crawlspace has standing water sometimes. Does that affect radon?", "answer": "Damp soil and water presence don't directly lower radon - radon comes from the decay of uranium in soil and rock regardless of moisture. However, standing water is a problem you need to address for its own reasons, and wet soil conditions can affect how a mitigation system performs. Deal with the water and the radon as related but separate concerns.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "Can I put the radon monitor in a crawlspace home on the second floor?", "answer": "You can, but for crawlspace homes the first floor is the priority. The crawlspace sits directly below the first floor and gas migrates upward. If you only test the second floor, you might see lower numbers and underestimate the actual entry rate into the home. First floor first.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "My crawlspace home is a ranch. Only one floor. Where exactly do I put the monitor?", "answer": "In the main living area of the first (and only) floor - a bedroom, living room, or family room where people spend the most time. At breathing height, away from exterior walls and windows. For a ranch on a crawlspace, the living room or a bedroom is the right starting point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "I sealed my crawlspace last year for energy efficiency. Do I still need to test?", "answer": "Encapsulation is great for energy and moisture, but it doesn't inherently solve radon. In fact, encapsulating without addressing radon can sometimes concentrate gas that used to dilute into outdoor air through the vents. Test your first-floor living space and see what the numbers look like after the encapsulation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace Homes", "question": "My neighbor has a crawlspace home and his radon was 8 pCi/L. Mine is the same house plan. Should I assume mine is similar?", "answer": "Don't assume - test. Even similar house plans can have dramatically different radon levels depending on the soil under each specific lot. Geology is hyperlocal. Your neighbor's 8 pCi/L is a good reason to get your own test done promptly, but the number could be higher or lower under your house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "I have a slab foundation. Do I need to worry about radon?", "answer": "Yes. Slab homes can absolutely have elevated radon. The slab sits directly on the soil, and radon gas travels through cracks, construction joints, and any penetrations in the concrete. It doesn't have the air gap that a crawlspace provides, so gas can move fairly directly from soil into the home. Test regardless of foundation type.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "Can radon enter through a concrete slab?", "answer": "Yes. Concrete is not radon-proof. Gas migrates through hairline cracks, the joint between the slab and the foundation wall, pipe penetrations, and even through the pores of the concrete itself over time. A thick, intact slab slows the entry rate but doesn't stop it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "My house is on a slab. Where do I put the radon monitor?", "answer": "In the lowest livable area - for a slab home, that's typically the first floor. Place the monitor at breathing height (2-6 feet off the floor) in a room where people spend time: a living room, bedroom, or family room. Keep it away from exterior walls, windows, and HVAC vents.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "My slab home tested at 5.0 pCi/L. How does radon get in through concrete?", "answer": "The gas doesn't really go through solid intact concrete in huge quantities - it finds the path of least resistance. That means construction joints (where the slab meets the foundation wall), any cracks that have developed, penetrations where pipes come through, and post-construction openings that weren't perfectly sealed. At 5.0 pCi/L you're above the EPA action level - that's a result worth addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "Does a sealed concrete floor reduce radon?", "answer": "Sealing cracks and joints can reduce radon entry somewhat, especially if the entry is concentrated at specific cracks. But surface sealers alone are rarely enough to bring elevated levels down to acceptable ranges. They're better thought of as a supplemental step than a complete fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "My house is slab-on-grade. Where do I test?", "answer": "First floor of the home, in a regularly occupied room, at breathing height. For slab-on-grade homes, the first floor is ground level, and that's where you want to know what the air looks like. A bedroom or living room is ideal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "I live in a slab home and my neighbor said slabs are safer for radon because there's no basement. Is that right?", "answer": "That's a common belief but it's not accurate. Slab homes can and do have elevated radon - there are plenty of documented cases of slab homes above 10 or even 20 pCi/L. The slab sits in direct contact with radon-producing soil. You can't assume you're safe because you don't have a basement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "Can mitigation work on a slab home?", "answer": "Yes. Sub-slab depressurization works very well on slab homes. A contractor drills through the slab, installs a suction pipe, connects it to a fan, and routes it to the exterior. The fan creates negative pressure under the slab that prevents radon from being pushed into the living space. It's the same core technology as basement mitigation, adapted for the slab.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "My slab home is 1,200 square feet. Do I need more than one suction point?", "answer": "Possibly. The number of suction points depends on the composition of the material under the slab and whether a single point can reach the whole sub-slab zone with adequate pressure. A contractor will typically do a communication test - drilling a small diagnostic hole - to see how well air moves under your specific slab before deciding on the number of suction points.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "We have a slab home in Florida. Is radon even a concern in Florida?", "answer": "It can be. While average radon levels in Florida are generally lower than in parts of the Midwest and Northeast, some areas - particularly Central Florida's phosphate belt - have elevated radon due to naturally occurring uranium in the soil. The EPA recommends testing regardless of where you live, because local geology varies and regional averages don't tell you what's under your specific house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "My slab home has radiant floor heating. Does the heated floor affect radon?", "answer": "Radiant heating warms the slab from below, which can potentially increase the pressure differential that drives radon upward. Whether it meaningfully increases radon entry depends on how the system is installed and what's under the slab. It's one more reason not to assume you're fine - test and see.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "Do cracks in my slab mean I have a radon problem?", "answer": "Not automatically - you could have cracks and still have low radon depending on the radon potential of your soil. But cracks are known entry pathways and are worth noting when you get a test done. If results come back elevated, those cracks are likely contributors and sealing them would be part of mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "I just poured a new concrete slab addition. Do I need to worry about radon in that new space?", "answer": "New construction is actually a great time to think about radon-resistant features - it's far easier and cheaper to install passive radon systems during construction than to retrofit later. If your area has any radon risk, rough-in a passive sub-slab vent while the concrete is being poured. Even if you never need to activate it with a fan, it's cheap insurance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "My slab home is newer construction - built in 2019. Is it radon-resistant already?", "answer": "It depends on your local building codes and whether the builder included radon-resistant new construction (RRNC) features. Some states and localities require it; others don't. Your home might have a passive pipe installed but no fan, which means it's partially ready but not actively mitigated. Check your builder specs and still get a test done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Foundation Homes", "question": "What level of radon is typical in slab homes vs. basement homes?", "answer": "There's no universal answer - it varies by geology more than by foundation type. Basement homes tend to measure higher because there's more below-grade surface area in contact with soil and more enclosed below-grade space for gas to accumulate. Slab homes often measure lower, but \"often\" is not \"always,\" and the only way to know for your home is to test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "I live in an apartment on the 5th floor. Should I worry about radon?", "answer": "At the 5th floor, radon levels are generally very low. Radon comes from the ground and tends to dilute significantly as it moves upward through a building. The EPA's guidance focuses on the lowest levels of a building, and by the time you're on the 5th floor, the risk from radon is typically negligible. Even so, there are unusual scenarios involving building materials containing radium, but those are rare.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "Can radon reach upper floors of an apartment building?", "answer": "Technically yes, some radon can migrate upward through elevator shafts, stairwells, and open air movement. But concentrations drop substantially with each floor. Studies generally show that radon levels become quite low by the 3rd or 4th floor and above. The meaningful concern is ground-floor and basement units.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "I live in a condo on the 2nd floor. Should I test for radon?", "answer": "A 2nd-floor condo with living space above grade and no basement below you carries relatively low radon risk. If you have an attached garage or a ground-contact slab directly under your unit, it might be worth a test. Otherwise, for a true 2nd-floor unit over another apartment, radon is generally not a significant concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "My condo building doesn't allow me to test for radon. What can I do?", "answer": "Short-term passive test canisters are non-invasive and don't require drilling or construction - there's nothing a building could really prevent about placing a small canister on a shelf. If the building is restricting access for a professional test, ask for the building's own radon testing records, which many well-managed buildings will have. Ground-floor and basement units in multi-unit buildings are sometimes tested building-wide.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "I'm in a high-rise. Does radon matter?", "answer": "Not really for most high-rise residents. Once you're several floors up, radon from the soil has been diluted many times over. The EPA and most public health guidance focuses radon concern on ground-floor and basement units, single-family homes, and low-rise buildings. If you're on the 10th floor, this is not a priority concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "I live above a neighbor's basement. Can their radon affect my unit?", "answer": "Radon travels upward but it dilutes and mixes with much larger volumes of air as it moves through a building. Your neighbor's basement radon level influences the concentration in common stairwells and hallways somewhat, but by the time it reaches a unit above, it's greatly diluted. The bigger risk is direct ground contact for the basement unit itself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "I'm on the first floor of a 3-story apartment building. Should I test?", "answer": "Yes, first-floor units are worth testing. You have more ground proximity than upper floors, and depending on the building's construction - especially if you have a concrete slab directly on grade - radon can enter your unit. First floor apartments occupy a middle ground of risk: higher than upper floors but lower than true basement units.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "I live in a basement condo that the building converted from storage. Is that a radon concern?", "answer": "Converted basement spaces can be a real concern, especially if radon-resistant features weren't part of the conversion. A space that was originally storage probably wasn't designed with occupant air quality in mind the same way a residence would be. Test it - I'd take a converted basement space seriously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "My apartment building is old - built in the 1950s. Does that make radon worse?", "answer": "Building age itself doesn't increase radon - the geology under the building is what matters. However, older buildings often have more cracks, settling, and deteriorated seals around utility penetrations that give radon more entry points. The concrete in the basement or ground floor may be less intact than a newer pour. It's one more reason to test rather than assume.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "I'm renting and just found out radon exists. How do I even get a test done in my apartment?", "answer": "You can buy a short-term test kit online or at a hardware store - they're inexpensive and work perfectly well for a first look. Set it in your lowest-level room, leave it for 48 to 96 hours, and mail it in. If you're in a basement or first-floor unit, this is worth doing. Results will tell you whether you need to take the next step of talking to your landlord.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "My apartment tested at 2.8 pCi/L. My landlord says that's fine. Is he right?", "answer": "2.8 pCi/L is below the EPA's 4.0 action level, so technically the EPA wouldn't require action at that number. However, the EPA also says that any level above 2.0 pCi/L carries some risk and is worth considering. Your landlord isn't wrong to say it's below the threshold, but he's oversimplifying if he implies there's zero risk. That's a judgment call you get to make with full information.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "My building has a basement garage. I live on the 2nd floor directly above it. Is that a radon concern?", "answer": "Potentially. Attached garages can have elevated radon because they're enclosed spaces in contact with soil. If your unit is directly above the garage and there are gaps in the floor-ceiling assembly, some radon could migrate up. It's less common but not impossible. If you're concerned, a test in your unit would settle the question.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "I own a condo on the 3rd floor. The building just got flagged for radon in the basement. Should I worry about my unit?", "answer": "Probably not significantly. Third-floor units are generally well-insulated from ground-level radon by the dilution that happens as air moves upward. The basement radon concern is real for ground and basement units. You could test your unit for peace of mind, but I wouldn't lose sleep over this at the 3rd floor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "I live in a split-level. Where do I put the radon monitor?", "answer": "Split-levels have multiple floor elevations, which makes testing a bit more interesting. The lowest level - typically the level that's partially or fully below grade - is your priority. That's the zone closest to the soil and usually where radon enters first. Test there, at breathing height, in whatever room is actually used.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "My split-level has a lower level that's half below grade and half above. Does the monitor go on that level?", "answer": "Yes. That partially below-grade level is your priority testing zone. Even if only part of the floor is below grade, it's still in contact with soil and still the primary entry point. Place the monitor in the center of that level, in a lived-in room, at breathing height.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "I have a ranch house on a slab with a partial basement under one wing. Where do I test?", "answer": "Test the partial basement first - that's the most below-grade space and the highest risk area. If people spend time down there, that reading tells you the most important thing. Also test the slab portion of the first floor separately if you're thorough, since that part has its own ground contact via the slab.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "My split-level home has an attached garage at the lowest level. Does that affect where I test?", "answer": "Attached garages at or below grade are a potential radon entry point and also sometimes harbor radon on their own from the slab. Test the lowest livable level - not the garage itself. If the garage shares walls with a living space, the condition of the wall between them (sealed, insulated, fire-blocked) affects how much gas migrates through.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartments, Condos, and Upper Floors", "question": "I have a bi-level (raised ranch). Should I test upstairs or downstairs?", "answer": "The lower level of a bi-level is your priority. It's typically at or partially below grade and is the primary entry zone. Test there first, then decide if you want a follow-up test upstairs.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Mobile Homes and Manufactured Housing", "question": "I live in a mobile home. Do I need to test for radon?", "answer": "Yes. Mobile homes and manufactured homes can have elevated radon, especially older models that are set directly on unprepared ground or have skirting that encloses the underbelly. The floor system of a mobile home is in relatively close proximity to the soil, and radon can migrate through the floor insulation and into the living space. Don't assume you're exempt from the concern just because it's a manufactured home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Mobile Homes and Manufactured Housing", "question": "Where do I put the radon monitor in a mobile home?", "answer": "Place it in the main living area - living room or bedroom - at breathing height, away from windows and exterior walls. In a mobile home, the entire living space is essentially ground-adjacent, so there's no lower level to prioritize. Pick the room where the most time is spent.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Mobile Homes and Manufactured Housing", "question": "My mobile home is on a permanent foundation. Does that make radon testing different?", "answer": "A permanent foundation - especially a concrete perimeter foundation with enclosed crawlspace or partial basement - changes the situation somewhat. Follow the same logic as any crawlspace or basement home: test the lowest livable area. If the home is on a pier-and-skirt setup, the living area of the home is still your test point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Mobile Homes and Manufactured Housing", "question": "How does radon get into a mobile home?", "answer": "Radon enters through the floor system - gaps around pipe penetrations, imperfect seals in the belly wrap, and the small gaps that develop over time in an aging manufactured home's floor structure. Homes with enclosed skirting that traps soil gas beneath the home can have higher levels. Ventilated underbellies help but aren't a warranty.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Mobile Homes and Manufactured Housing", "question": "Can you put a radon mitigation system in a mobile home?", "answer": "It's more complicated than a stick-built home, but it's not impossible. Sub-slab systems don't apply the same way, but in some configurations with enclosed crawl areas, a depressurization approach can work. It depends heavily on the specific foundation setup. A contractor experienced with manufactured housing would need to evaluate the situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Mobile Homes and Manufactured Housing", "question": "My mobile home tested at 4.8 pCi/L. That's above the limit, right?", "answer": "The EPA action level is 4.0 pCi/L, so yes, 4.8 is above that threshold. I'd take that result seriously regardless of home type. Give us a call and we can talk through what the options look like for your specific setup.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Townhouses and Attached Homes", "question": "I live in a townhouse. Is radon a concern?", "answer": "Yes. Townhouses sit on foundations just like single-family homes - often a basement or slab - and radon enters the same way. The fact that walls are shared with neighbors doesn't meaningfully change your radon exposure. Each unit typically has its own foundation and its own soil contact. Test your unit independently.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Townhouses and Attached Homes", "question": "My townhouse has a basement. Same rules as a regular basement?", "answer": "Exactly the same. Test on the lowest livable level, at breathing height, away from exterior walls and vents. The shared walls with adjacent units don't significantly affect radon levels - your unit's reading is primarily driven by what's under your specific foundation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Townhouses and Attached Homes", "question": "Can radon come in from my neighbors' unit in a townhouse?", "answer": "Some migration between connected units is theoretically possible, but it's generally minor compared to what enters through your own floor and foundation. Radon concentrations in adjacent units differ significantly depending on what's under each unit's footprint. Your primary concern is what's entering your space, not your neighbors'.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Townhouses and Attached Homes", "question": "My townhouse end unit is the one that butts up against the hillside. Does that matter for radon?", "answer": "It can. A unit that's backed against a slope may have more soil contact on the rear and foundation walls than interior units. That potentially means more entry surface area. It's a good reason to test - don't assume your unit has the same risk as a middle unit of the same building.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Townhouses and Attached Homes", "question": "My townhouse HOA had the building tested years ago. Can I rely on those results?", "answer": "Old tests have limited value. Radon levels can change over time as foundations settle, gaps develop, and soil conditions shift. If those results are more than a few years old, get your own test. And make sure the test covered your specific unit - a test in a different unit doesn't tell you what's happening under your floor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Older Homes and Unique Situations", "question": "My house is very old - built in the 1920s. Does that mean more radon?", "answer": "Not necessarily more radon in the soil, but older homes often have more pathways for radon to enter. Stone or brick foundations, mortar joints, earthen floors in crawlspaces, and settling cracks give radon more ways in compared to a tight, modern poured concrete foundation. Age alone doesn't predict the level, but old homes can have more entry points.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Older Homes and Unique Situations", "question": "I have a fieldstone foundation basement. Is radon testing different for that?", "answer": "Fieldstone foundations are very porous and typically have many gaps and mortar joints through which radon can enter freely. Sealing a fieldstone foundation is nearly impractical - there are just too many openings. Sub-slab depressurization is often the best approach for homes with fieldstone or rubble foundations. Test first to know what you're dealing with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Older Homes and Unique Situations", "question": "My 1920s house has a dirt floor in the basement. Is that a radon concern?", "answer": "Absolutely. A bare dirt floor is essentially an open pathway for soil gas including radon. There's nothing between the radon-producing soil and your basement air. If you have a dirt floor basement, I'd move testing to the top of the priority list. Sub-slab depressurization for a dirt floor typically involves covering with polyethylene and routing suction beneath it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Older Homes and Unique Situations", "question": "My basement is original 1940s poured concrete. It looks solid. Does it still allow radon in?", "answer": "Old concrete develops cracks and voids over time - freeze-thaw cycles, settlement, and aging all work on it. Even if it looks intact to the naked eye, poured concrete from that era typically has more permeability than modern mixes. Don't let it looking solid give you a false sense of security. Test and see.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Older Homes and Unique Situations", "question": "My house has a combination fieldstone basement and a crawlspace addition from the 1970s. Where do I test?", "answer": "Both areas are worth understanding. Test the lowest livable level - if people use the basement, test there. If the crawlspace section feeds into a first-floor room, test that room too. With two distinct foundation types, you could have different radon conditions in different parts of the house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Older Homes and Unique Situations", "question": "I have a log cabin on a crawlspace. Is radon testing relevant?", "answer": "Yes. The foundation type matters more than the wall construction when it comes to radon. A log cabin on a crawlspace is the same radon story as any crawlspace home - test the first floor. The logs in the walls don't meaningfully affect radon entry or exit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Older Homes and Unique Situations", "question": "We converted our attached garage into a living space. Do I need to test there?", "answer": "Yes, and particularly so. A converted garage has a slab that was not designed as living space, and radon-resistant construction was almost certainly not part of the original garage build or the conversion. Test the converted space specifically - don't assume the rest of the house reading applies.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Older Homes and Unique Situations", "question": "My sunroom addition is on a slab but the main house is on a basement. Does the sunroom need separate testing?", "answer": "It can be worth testing separately, especially if the sunroom is an enclosed space where people spend significant time. Additions sometimes have their own foundation conditions distinct from the main house. If you're testing the basement anyway, grab a test for the sunroom addition at the same time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Older Homes and Unique Situations", "question": "We're finishing our basement. Should I test before or after I drywall?", "answer": "Before is better if you can manage it, because finishing the basement can seal some entry points but also can change airflow patterns in ways that affect radon. More importantly, knowing your level before you finish tells you whether you should install a passive radon rough-in during construction - which is much cheaper than retrofitting after drywall is up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Older Homes and Unique Situations", "question": "I'm about to buy a house with a crawlspace. The seller's radon test showed 2.1 pCi/L. Should I rely on that?", "answer": "You can use it as one data point but don't rely on it as a warranty. The test conditions matter - was it done during a closed-house period? How old is the test? Which room? If the sale allows for it, request your own independent test or at minimum verify the conditions under which theirs was done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "I have three floors plus a basement. How many radon tests do I need?", "answer": "For most families, one test in the lowest livable level is the primary concern. If results are elevated and you're considering mitigation, a post-mitigation test in the same location confirms the fix worked. You don't need to comprehensively test every floor - start at the bottom, where it matters most.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "Can radon be high on the second floor if the basement is low?", "answer": "It's unusual. Radon generally decreases as you go up in a home. If you somehow got a higher reading on a higher floor, I'd question the test conditions - was the window open, was something unusual happening? In extremely rare cases, building materials or very unusual air pressure patterns can cause anomalies, but this isn't the typical scenario.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "My basement reading was 1.8 pCi/L. Does that mean my first floor is safe?", "answer": "It means radon is unlikely to be a problem on the first floor if the basement is at 1.8, since first-floor levels are generally well below basement levels. But if you want certainty, you can always test the first floor too. A 1.8 basement reading is relatively low and suggests the soil under your home isn't a heavy radon producer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "I tested my basement twice and got 3.8 and 4.2 pCi/L. Which one is right?", "answer": "Both could be right - they reflect real variation in radon levels over different time periods. Radon levels fluctuate with pressure, temperature, weather, and season. An average of those two tests - roughly 4.0 - is a reasonable view of your situation, and at 4.0 you're right at the EPA action level. I'd take it seriously and consider a long-term test to get a more stable annual average before deciding on mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "My winter test was 5.5 pCi/L and my summer test was 2.9 pCi/L. Why are they so different?", "answer": "Seasonal variation is real and common. Winter testing tends to show higher radon because homes are closed up - less ventilation means less dilution of indoor radon. In summer, windows are open more and air exchanges more freely, which can significantly lower readings. The winter number is generally considered more representative of worst-case annual exposure, but neither alone tells the full story. A long-term annual test is the gold standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "What time of year should I test for radon?", "answer": "Any time of year gives you useful information, but winter through early spring tends to give the most conservative reading because homes are closed and heating-season pressure differentials pull more soil gas in. Summer tests can underestimate annual exposure. Even so, a test anytime is better than no test. Don't wait for the \"right\" season if you're ready to test now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "Can I trust a radon test I did myself, or do I need a professional?", "answer": "DIY test kits - especially the charcoal canisters from reputable labs - are well-validated and routinely used for real estate transactions and personal testing. They're accurate when used correctly. The key is following the instructions: proper placement, proper test duration, and mailing to an accredited lab. A DIY kit done right gives you reliable results.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "My contractor says I don't need to test because they sealed the basement floor last year. Is that right?", "answer": "Sealing the floor is a good step but it's not equivalent to a tested and confirmed mitigation system. Sealers can reduce some entry through cracks but they aren't comprehensive. The only way to know if your radon is in a good range is to test it. Don't skip the test based on a sealing job.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "How often should I test for radon?", "answer": "The EPA recommends testing every two years if your levels were low, or after any significant change to the home - major renovation, adding finished space below grade, changes to HVAC systems, or after buying or selling. If you have a mitigation system, test annually to confirm the system is still performing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "I have an older radon mitigation system. Do I still need to test?", "answer": "Yes. Fans wear out, pipes can develop blockages or cracks, and the system's performance can degrade over time. An existing mitigation system with no recent test tells you nothing about current effectiveness. Annual testing is recommended for mitigated homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "What is a long-term radon test and is it better than a short-term test?", "answer": "A long-term test runs for 90 days to a year and gives you a much more stable picture of your actual annual average radon exposure. Short-term tests (48 to 96 hours) are useful for quick checks - real estate transactions, a first look - but they capture a snapshot that may be influenced by atypical conditions. If you have the time, a long-term test is a better measure of what your family is actually exposed to.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "Can I use my continuous radon monitor to get a long-term reading?", "answer": "Yes. Many continuous electronic monitors average readings over time and give you rolling averages over 30, 60, or 90 days. That long-term average is more meaningful than a single-day reading. Set the monitor in the right location and let it run for an extended period to build a reliable picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "I placed my monitor in the guest bedroom that's in the basement. Nobody sleeps there much. Is that the right room to test?", "answer": "It's a valid place to test since it's on the lowest level, but consider testing where people spend the most time. A guest bedroom used a few times a year gives you less actionable information than the basement family room used daily. If you have a choice, test in the most-used basement space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "My monitor gives me a reading that changes a lot day to day. Is it broken?", "answer": "Probably not. Radon levels naturally fluctuate - sometimes dramatically - due to atmospheric pressure, wind, rainfall, temperature inversions, and your home's ventilation patterns. A monitor that shows day-to-day variation is doing its job. The meaningful number is the average over time, not any single day's reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Testing Strategy and Multiple Zones", "question": "My monitor spiked to 18 pCi/L overnight then came back down to 4. What happened?", "answer": "That kind of spike often happens during pressure changes - a storm front passing through can cause a spike in radon because the dropping barometric pressure allows more soil gas to flow into the home. It's real, but a single overnight spike doesn't define your chronic exposure. Look at the running average over days and weeks, not the peak.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I just moved into a new house and the home inspector said radon was 4.5 pCi/L. Where did they put the monitor?", "answer": "Ask the inspector exactly where the test was placed - room, floor, and height off the floor. If it was on the lowest livable level at proper height and away from windows and vents, that's a valid reading. 4.5 pCi/L is above the EPA action level. You'd want to look at mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "The home inspector did a radon test in the storage room under the stairs. Is that a good location?", "answer": "Not ideal. A storage area under the stairs may have poor air circulation and isn't representative of occupied space. If you relied on that test for a real estate decision, you might want to do your own test in the main basement living area to verify. Placement matters for getting a meaningful result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My real estate agent said radon below 4.0 is \"safe.\" I keep seeing that word. Is any level actually safe?", "answer": "The EPA doesn't use the word \"safe\" with radon - and I wouldn't either. Any radon exposure carries some level of risk; the 4.0 pCi/L threshold is where the EPA recommends taking action, and between 2.0 and 4.0 they say consider it. But there's no level where the risk goes to zero. The goal of mitigation is to lower the level as much as practically possible, not to reach some \"safe\" number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My radon monitor has been sitting in the same spot for six months. Should I move it to test other areas?", "answer": "If you've had a stable reading from one location for six months, you have a good picture of that area. If you're curious about another room or level, run a second device there rather than moving the original. Moving the established monitor resets your long-term average for that location.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I bought a house that already has a mitigation system. Do I still need to test?", "answer": "Yes. Verify that the existing system is actually working by testing post-purchase. You don't know the system's history, when the fan was last replaced, or whether it was installed correctly. A quick short-term test will confirm whether it's performing. This is standard practice for homes with existing mitigation systems.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My radon monitor shows 3.8 pCi/L. My husband says that's basically 4 and we should mitigate. I say it's under 4 and we're fine. Who's right?", "answer": "You're both in reasonable territory for disagreement. 3.8 is technically below the EPA action level, but it's right on the edge. The EPA itself says levels between 2.0 and 4.0 are worth considering. If this is a long-term stable average, the difference between 3.8 and 4.0 is not significant enough to feel confident either way. I'd lean toward mitigation at 3.8, especially in a room where people sleep. Give us a call and we can talk it through.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I have young kids at home. Does that change where the threshold for action should be?", "answer": "Many people with young children choose to mitigate at levels below 4.0, and that's a reasonable decision. Children spend more time at home, they breathe at higher rates relative to body size, and they have more cumulative years of potential exposure ahead of them. The EPA's 4.0 guideline is a population-level action point, not a bright line of safety. Families with kids often decide to act at 2.5 or 3.0 and I think that's well-founded.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I'm pregnant. Should I be more worried about radon?", "answer": "The radon risk to your health doesn't change based on pregnancy - the lung cancer risk from radon exposure is a long-term cumulative effect from years of inhaling radon decay products. It's not an acute hazard that increases during pregnancy the way some toxins might. Even so, if you have elevated radon, now is a great time to fix it before the baby arrives and spends years in that environment. Talk to your OB about any health concerns - that's not a question for a radon contractor to answer medically.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My neighbor said radon gave her migraines. Is that possible?", "answer": "No. Radon does not cause acute symptoms like headaches, migraines, fatigue, or sore throats. Radon's health risk is from long-term cumulative exposure to radiation from radon decay products - the concern is lung cancer over years and decades, not day-to-day symptoms. If your neighbor is experiencing migraines, the cause is something other than radon. Even so, it's worth testing regardless, because radon's risk is real even though it's silent.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "Can radon make you feel sick?", "answer": "Not in any way you'd notice. Radon is an odorless, colorless, tasteless radioactive gas. It doesn't irritate eyes, throats, or airways. The danger is invisible and cumulative - years of breathing elevated levels of radon increases lung cancer risk, but you won't feel anything from day to day. That's actually what makes it more important to test, not less. You can't rely on symptoms to warn you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "Why doesn't radon cause immediate symptoms if it's radioactive?", "answer": "The radiation dose from typical residential radon concentrations is too low to cause acute radiation effects - those require massive doses. Radon's lung cancer risk comes from chronic, long-term exposure to low-level alpha radiation in the lungs over years. Think of it like the difference between a brief exposure to sunlight (fine) and decades of daily sun exposure without protection (skin cancer risk). The harm accumulates slowly and silently.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I have asthma. Should I be more worried about radon?", "answer": "Asthma is a separate condition from radon risk. Radon doesn't trigger asthma directly - it's not an irritant or allergen. However, if you already have compromised lung function, some researchers suggest additional radon exposure on top of that may carry somewhat more risk. Testing and reducing radon exposure is a sensible thing to do for any family, and even more so if you have a history of lung disease. Talk to your doctor about the specifics of your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My house tested fine five years ago. Can I assume it's still fine?", "answer": "Not confidently. Radon levels can change as foundations age and crack, as soil conditions shift, and as homes are renovated or HVAC systems are modified. Five years is long enough that a re-test makes sense, especially if any significant changes have been made to the home. The EPA recommends re-testing every two years or after major changes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I bought a Airthings monitor. Is that a reliable brand?", "answer": "Airthings is one of the more established consumer continuous radon monitor brands. Their monitors have been independently evaluated and perform reasonably well for home use. No consumer electronic monitor is as precise as a professional testing device, but for ongoing awareness and catching elevated levels, it's a solid choice. Use the long-term average reading, not daily fluctuations, for your decision-making.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My contractor says just open the windows and radon will go away. Is that true?", "answer": "Opening windows lowers radon levels while they're open - fresh air dilutes the indoor concentration. But the moment you close the windows, levels begin returning to their equilibrium. In cold climates, you can't keep windows open year-round, and in summer you lose your AC efficiency. Ventilation is not a mitigation strategy. It's a temporary dilution approach that doesn't address the underlying entry of radon from the soil.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My house has a whole-home ventilation system (HRV or ERV). Does that help with radon?", "answer": "HRV and ERV systems do exchange indoor and outdoor air continuously, which can help lower radon concentrations. In some cases they reduce levels significantly. However, they're not promised to bring elevated levels down to an acceptable range, and their effectiveness depends on the radon entry rate in your home. Test even with the ventilation system running - if levels are still elevated, sub-slab depressurization is the more reliable solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I want to know the difference between my bedroom radon and my living room radon. Do I need two separate monitors?", "answer": "Yes. If you want to understand both spaces individually, you need a monitor in each location running simultaneously. A single monitor tells you only about the room where it's sitting. If both rooms are on the same floor and share open air, the readings will likely be similar, but separate tests confirm that.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "Can pets affect radon readings?", "answer": "No. Pets don't produce or emit radon, and their presence doesn't meaningfully affect how radon disperses through a room. The concern sometimes comes up with humidity from fish tanks or other moisture sources, but even those effects are minimal on a radon monitor placed at reasonable distance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My sump pump has a lid but it's not airtight. Does that matter?", "answer": "A loose or non-airtight sump lid can allow radon to escape from the pit directly into the basement air. Sump pits are one of the more significant radon entry points in many basements because the pit provides direct access to the sub-slab soil and aggregate. Installing an airtight lid with a sealed pump-out valve is a smart step regardless of mitigation status, and it's often done as part of professional mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I have a French drain system in my basement. Does that affect radon?", "answer": "It can. French drains and interior perimeter drain tile systems connect to the soil and sub-slab zone, which means they're connected to wherever radon is coming from. The drain itself can be a radon pathway. A mitigation system installed in a home with interior drainage needs to account for that connectivity, and sometimes the drain tile can actually be used as part of the sub-slab depressurization network.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My basement has a water softener and water treatment system. Any issues with the monitor near those?", "answer": "Keep the monitor away from equipment that generates significant moisture or chemical vapor. Water softeners and treatment systems can add humidity to the air locally, and humidity can affect some monitor types. More practically, the plumbing area is usually in a utility corner - not where people spend time. Test in the living area, not the utility area.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I tested my crawlspace home and got 1.2 pCi/L on the first floor. Is that good?", "answer": "1.2 pCi/L is a relatively low level. The EPA's concern begins to grow meaningfully above 2.0 pCi/L, and the action level is 4.0. A 1.2 reading suggests the soil under your home isn't a heavy radon source, at least under the conditions during your test. That's a reassuring result. Re-test in a few years or if you make significant changes to the home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My neighbor drilled a well and now I'm wondering if that disturbed the soil radon under my house. Is that a thing?", "answer": "Drilling doesn't typically affect radon levels under neighboring properties - the geology that determines your radon levels is largely independent of surface disturbances nearby. Your neighbor's drilling activity shouldn't have changed what's happening under your foundation. If you're curious, test - that's the only way to know what's actually happening under your house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My radon monitor keeps beeping. What does that mean?", "answer": "That depends entirely on the monitor model. Most monitors that beep are either alerting you to a high reading, a low battery, or an error condition. Check the manual for the specific alert pattern. A sustained elevated reading that triggers an alarm is worth taking seriously and following up on with a calibrated test or professional assessment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My monitor read 12 pCi/L for one day then went back to 4. Should I be worried?", "answer": "A single-day spike that high - especially overnight - often corresponds to a weather event or a sudden pressure change. It's real, not a glitch, but it doesn't mean your chronic exposure is 12 pCi/L. Look at the multi-week average. If your average is running at 4 or above, that's the number to act on. The spike is a signal worth noting, not ignoring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I'm in Arizona on a slab. My neighbor says there's no radon in the desert. Is that true?", "answer": "Not entirely. Arizona's geology varies significantly - some areas have elevated uranium in the soil and fairly high radon. The Phoenix metropolitan area has mixed results; some areas are low, others are not. Radon is found in every state, and \"desert\" doesn't mean radon-free. Test your specific home rather than relying on regional assumptions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My house is in the Pacific Northwest and my contractor said radon is only a concern in the Midwest. Is that right?", "answer": "No. Radon is found throughout the Pacific Northwest as well. Parts of Washington state and Oregon have elevated radon due to local geology. The EPA's radon zone map designates parts of the Pacific Northwest as Zone 1 (highest potential). Don't skip testing based on geography - local geology matters more than broad regional generalizations.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I live in a rural area on well water. Can radon come from the water too?", "answer": "Yes, well water drawn from granite aquifers can contain dissolved radon that releases into indoor air when water is used. This is called radon-in-water and is distinct from soil-source radon but contributes to indoor levels. The EPA has noted that radon from water is generally a smaller contributor than soil-source radon, but in high-radon water regions it can be a meaningful factor. Testing water for radon is a separate test from air testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "Can I test for radon from water at the same time as testing the air?", "answer": "Yes. Radon water testing and air testing are independent - the water test is sent to a lab separately from the air test canister. If you're on a private well, it's worth running both. If you're on municipal water, water-source radon is essentially a non-issue because the treatment process typically removes it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I'm selling my house and the buyer wants a radon test. Can I just move my old monitor reading to satisfy them?", "answer": "A real estate radon test needs to be a fresh, properly conducted test - usually a short-term charcoal canister placed by a professional or following professional protocols. An old monitor reading, or a reading from a device placed under non-standard conditions, won't satisfy a contract requirement for a radon inspection. Get a fresh test done correctly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My house has an addition built over a crawlspace but the original house is on a basement. Do I test both?", "answer": "If both areas are used, testing both gives you the most complete picture. The original basement section and the crawlspace addition may have very different radon entry conditions. One test in the basement and one on the first floor above the crawlspace addition would cover both zones well.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I put my monitor in the basement but my kids are playing down there and keep moving it. What do I do?", "answer": "Put the monitor somewhere they can't reach easily - on a high shelf, in a spot they don't play near, or with a note for them not to touch it. A monitor that gets handled and moved frequently during the test period will give you a less reliable reading. Even a short-term test needs a few undisturbed days in one location.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My basement has a finished ceiling and you can't see the floor joists. Does that affect anything with radon?", "answer": "A finished ceiling doesn't affect radon testing directly - the monitor sits in the room air at breathing height regardless. It does potentially affect a mitigation assessment, because the contractor may need to know where utility chases and open bays are. But for testing purposes, a finished ceiling basement is no different from an open-framed one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I just had a radon mitigation system installed. How soon after installation should I test?", "answer": "Wait at least 24 hours after installation before starting your post-mitigation test. Most contractors recommend 24 to 48 hours for the system to reach steady-state operation. Then run a short-term test of 48 to 96 hours in the same location as the original test. That gives you a valid comparison.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My mitigation system reduced my radon from 8 pCi/L to 1.4 pCi/L. Does that mean the problem is completely solved?", "answer": "That's an excellent outcome. A post-mitigation reading of 1.4 pCi/L is well below both the EPA action level and the EPA consideration threshold. The system is working effectively. Continue to test annually to confirm the system maintains its performance as the fan ages.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "The mitigation contractor says my system reduced radon from 6 to 2.8 pCi/L and that's good enough. Is he right?", "answer": "2.8 pCi/L is below the 4.0 action level, which is a meaningful improvement. However, 2.8 is still in the range where the EPA says consider mitigation. Whether the system can do better depends on the sub-slab conditions. Ask the contractor whether a second suction point or a higher-flow fan might bring it lower. The goal is to get as low as practically achievable, not just below 4.0.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I have a radon system but I can hear the fan struggling. Is that an issue?", "answer": "A fan that sounds labored or different than usual is worth investigating. Fans can wear out, become partially blocked, or lose efficiency over time. A degrading fan means reduced sub-slab suction and potentially rising radon levels. Get the fan checked or replaced, and test afterward to confirm performance is restored.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My mitigation system fan is in the attic and it's really cold up there in winter. Does that matter?", "answer": "Fans mounted in unconditioned attic spaces can experience condensation in cold weather, which can affect motor longevity over time. It's worth insulating the exhaust pipe in that space if the contractor didn't. The fan itself should be rated for outdoor use and handle temperature extremes, but thermal stress does shorten fan life. Check the fan annually and plan to replace it proactively every 5 to 10 years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "How do I know if my radon system is working without testing?", "answer": "The suction diagnostic on most systems - a small U-tube manometer or the fan's audible hum - tells you the fan is running, but only a post-mitigation test tells you if radon levels are actually low. The fan running is necessary but not sufficient. Test annually to verify.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My house has a passive radon pipe installed from construction but no fan. Does that do anything?", "answer": "A passive pipe system can reduce radon somewhat - especially in summer when thermal stack effects draw air upward through the pipe. In winter or under heating conditions that create different pressure patterns, passive may do little. Adding a fan activates the system and makes it actively depressurize the sub-slab zone. A passive system is better than nothing, but if your levels are elevated, adding a fan is the reliable solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I have a radon pipe stub coming out of my basement slab but no fan has ever been installed. My house just tested at 5.8 pCi/L. Can I just add a fan to that existing pipe?", "answer": "Likely yes, if the stub was properly installed. A radon contractor can inspect the existing rough-in, verify it communicates with the sub-slab zone adequately, and install a fan on that pipe. It's often a straightforward add-on if the original passive installation was done correctly. Call us and we can take a look.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My inspector said my radon pipe goes into the garage but not through the roof. Is that okay?", "answer": "No. A radon exhaust pipe needs to terminate outside, typically above the roofline so the exhaust isn't re-entrained into the house through windows or the HVAC system. Exhausting into the garage introduces radon into an attached space that connects to the home. That installation needs to be corrected.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "Where is the radon supposed to exhaust to?", "answer": "Above the roofline, at least 10 feet from any window, door, or air intake that could allow the exhausted radon back into the living space. Some configurations exit through the side of the house and then vertically past roof height. The goal is to release the radon into the open outdoor air where it disperses harmlessly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I noticed my radon exhaust pipe terminates right next to my AC unit's air intake. Is that a problem?", "answer": "Yes, that's a problem. If the HVAC system is pulling air from near the radon exhaust point, it could potentially draw some of that exhausted radon back into the home's air distribution system. Ideally, the exhaust terminates well away from any air intakes. Have a contractor evaluate the installation and reroute if needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "Do I need to tell my insurance company about radon mitigation?", "answer": "Radon mitigation doesn't typically affect homeowner's insurance or require notification to your insurer - it's an improvement to the home, not a change in liability classification. It's not like adding a pool or trampoline from an insurance standpoint. But check with your insurer if you have specific questions about your policy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I just found out what radon is and I'm kind of freaking out. My basement is where we hang out every day. What should I do first?", "answer": "First thing: test. Everything else follows from knowing your actual level. You can get a test kit online or at a hardware store and have results in a week. Until then, increase ventilation as much as practically possible - open basement windows when weather allows, and run a fan to exchange air. But don't let temporary measures replace getting the actual test done. Knowing your number is the only way to know whether you have a real problem or whether the worry is bigger than the risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "Is radon something I should have checked every time I move to a new house?", "answer": "Yes. Testing a home for radon when you move in is a straightforward and inexpensive thing to do. Previous owners may not have tested, conditions change over time, and radon levels can vary significantly between adjacent properties. It's a simple step that gives you real information about the air quality in your new home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My aunt lives in an older rancher on a slab in Ohio. She doesn't believe in radon testing. How do I convince her?", "answer": "Ohio has elevated radon across much of the state, and older slab ranchers can have real radon entry issues. You can't argue with a test result - that's the most persuasive thing available. Buy her a test kit, leave it at her house, and let the number do the talking. If it comes back low, she can feel validated. If it comes back elevated, she has information she can actually act on.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My neighbor just got a mitigation system installed and his radon went from 9 to 0.8 pCi/L. Is that typical?", "answer": "That's a very good result, and yes, that kind of reduction is what a properly designed mitigation system can achieve. Most installations see radon drop by 80 to 99 percent. A starting level of 9 going to 0.8 is outstanding performance from the system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "How do I find out if my specific neighborhood has a radon problem?", "answer": "Your state radon program often publishes county-level or zip-code-level radon data based on aggregated test results. The EPA's zone map gives broader regional context. But neighborhood averages don't tell you what's under your specific house - the geology is hyperlocal enough that two houses on the same street can have very different levels. Use regional data as context, but test your own home for your actual answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I found an old radon test canister in a drawer. Can I still use it?", "answer": "Probably not - charcoal canisters have a limited shelf life, typically 6 to 12 months from manufacture. An old canister sitting in a drawer for years has degraded charcoal that may not accurately capture radon. Toss it and get a new one from a reputable source.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My landlord did a radon test but I wasn't home. Can I trust those results?", "answer": "You can ask for the lab report, which should show the test location, placement height, test duration, and measured levels along with lab accreditation. If those details check out, the results are trustworthy. If the landlord can't produce the lab report or only has a verbal assurance, that's worth following up on with your own test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "Can radon levels be different in winter vs summer by a lot?", "answer": "Yes, sometimes dramatically. The difference between a closed winter reading and an open-window summer reading can easily be a factor of 2 or even more. Homes that test at 2.5 pCi/L in summer sometimes test at 5 or 6 pCi/L when closed up in January. If you're making a decision about mitigation, winter or closed-house testing gives you the most relevant data for your actual worst-case exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My crawlspace is encapsulated and has a dehumidifier in it. Is that better or worse for radon?", "answer": "Encapsulation with a dehumidifier is excellent for moisture control, but it doesn't address radon. In fact, a well-sealed crawlspace without sub-membrane depressurization can sometimes funnel radon upward more efficiently since it's no longer ventilating to the outside. Test the first floor to see what the encapsulation has done to radon levels. If they're elevated, sub-membrane depressurization under the encapsulation barrier is the next step.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My crawlspace has spray foam on the walls and ceiling. Does that help with radon?", "answer": "Spray foam on the crawlspace walls improves energy efficiency and reduces some air infiltration, but it's not a radon barrier. The soil floor of the crawlspace is still the primary radon source. Foam on the walls doesn't address what's coming up through the ground. You still need a ground barrier and ideally depressurization.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My house is on a hill and the back is walkout basement level but the front is two stories above grade. Where does radon come in?", "answer": "Radon enters wherever the home is in contact with the ground - the below-grade portions of the walkout basement. The walkout basement level, despite one side being at grade, is still the primary entry zone. Test the basement level, and the exposed walkout side (which has a wall opening) may actually allow some natural ventilation on that end. But the remainder of the basement that's below grade is still the concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I have a walkout basement. Does the fact that it has a door to the outside reduce radon?", "answer": "The door does allow air exchange when opened, but a walkout basement still has substantial below-grade wall and floor area through which radon enters. You can't count on the walkout door to dilute levels adequately - it's only open when people go in and out, and in winter it's closed most of the time. Test it like any other basement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My walkout basement tested at 3.2 pCi/L. Is that lower than a typical enclosed basement?", "answer": "Walkout basements sometimes do test lower than fully enclosed basements because of the more favorable natural air movement, but 3.2 is still in the range where the EPA says consider mitigation. Below 4 but above 2 - that's a judgment call. If it's where your family spends a lot of time, it's worth thinking through.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I have an in-law suite in the basement. The radon test there was 4.9 pCi/L. Is that bad for an older person?", "answer": "Yes, I'd take that seriously. 4.9 pCi/L is above the EPA action level, and for someone spending many hours a day in that space - as an in-law suite occupant typically would - the cumulative exposure is meaningful. Age can compound the risk if there's any prior lung condition. This is a situation where I'd prioritize getting mitigation done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My mother-in-law lives in a basement apartment under our house. Should I be the one to deal with the radon or is it her responsibility?", "answer": "Since it's your house and your foundation, radon mitigation is the homeowner's responsibility. If the in-law suite is part of your property, the radon entry issue is structural and on you. I'd take ownership of getting it tested and addressed - it directly affects someone living in your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "Does running the bathroom exhaust fan in the basement affect radon readings?", "answer": "A bathroom exhaust fan creates slight negative pressure in that immediate area and can pull some radon toward the fan intake while also exhausting air. Over an extended test period, it's probably a minor influence. More meaningfully, if the fan is creating a local suction near a radon entry point, it could skew readings in the bathroom itself. Test in the main room of the basement, not in the bathroom.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My basement has a dropped ceiling with tiles. Does that help or hurt with radon?", "answer": "Dropped ceilings don't meaningfully contain or reduce radon - the gas moves freely through ceiling tile gaps and the plenum above. It doesn't help radon but it doesn't significantly hurt either. For testing purposes, the dropped ceiling basement is the same as any finished basement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I just found out radon is a thing and I feel like I've been breathing it for years without knowing. Is there anything I can do about past exposure?", "answer": "Past exposure is done - there's no way to undo it or remove radon from your body after the fact. Radon itself exits your system quickly once you stop breathing it, but the damage from its decay products to lung tissue accumulates over time. The best thing you can do now is test your home, reduce current exposure if levels are elevated, and talk to your doctor about your history if you have concerns. Don't smoke or be around secondhand smoke - the combination of radon and smoking multiplies lung cancer risk significantly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My doctor told me to check my radon levels because I'm a former smoker. Is that advice I should follow?", "answer": "Yes. Former smokers and current smokers have a significantly elevated lung cancer risk from radon compared to non-smokers - the two risks combine multiplicatively, not just additively. If your doctor is raising this, it's worthwhile advice. Get the test done and if levels are elevated, mitigate. That's a meaningful step you can actually take to reduce ongoing risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "What's the relationship between smoking and radon risk?", "answer": "Radon and smoking are the two leading causes of lung cancer, and together they're far more dangerous than either alone. A non-smoker at elevated radon has meaningful increased risk. A smoker at the same level has dramatically higher risk - some estimates suggest smokers at 8 pCi/L have a lung cancer risk roughly 25 times higher than someone with little exposure to either. It's the most important thing to understand about radon risk for smokers.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "My house test came back at 7.3 pCi/L. I'm a non-smoker. How worried should I be?", "answer": "7.3 pCi/L is significantly above the EPA action level. It's a result you should act on. The risk from chronic exposure at that level is meaningful even for a non-smoker. Mitigation will bring it down substantially - most well-done systems get levels below 2 pCi/L. Get a contractor assessment and address it. Call or text and we can walk through what that looks like for your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "Is there a \"don't panic\" level of radon?", "answer": "Below 2.0 pCi/L, the EPA suggests the risk is relatively low and most people in that range don't take additional action. Between 2.0 and 4.0, the EPA says consider it - lower is better, and there's still some real risk. Above 4.0, the EPA recommends action. Above 8 pCi/L, I'd say get it addressed promptly. None of these levels are zero risk - the goal is to get as low as practically achievable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Specific Scenarios and Common Questions", "question": "I just want a simple answer: what's a good radon number?", "answer": "The lower the better. Below 2.0 pCi/L - most people consider that a reassuring result. Between 2.0 and 4.0 - worth thinking about, especially for long-term occupancy or if kids are in the home. Above 4.0 - the EPA recommends action. Those are the guideposts. There's no level that's risk-free, but below 2 is where most people feel comfortable and where chronic exposure risk is relatively low.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "Can my monitor give a false low reading?", "answer": "Yes. A monitor placed near an open window, a running HRV supply vent, or a drafty exterior wall can read lower than the actual room average because outdoor air is diluting the sample. A monitor in a dead-air pocket can read artificially high. The goal is to place it where the air around it is representative of what you actually breathe throughout the day.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "My basement has a wood stove. Can I put the radon monitor near it?", "answer": "Keep it well away from the wood stove. Combustion appliances affect local air pressure and circulation significantly, and a stove actively burning draws combustion air from the room in ways that could skew a radon reading. Get the monitor to the opposite side of the basement from any combustion appliance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "Can candles or incense burning near the monitor mess up the reading?", "answer": "Repeated burning of candles or incense in the exact vicinity of the monitor over an extended period could introduce particulates and airflow changes that affect some sensor types, particularly ionization-based monitors. For a short-term canister test it's not likely a major issue. For an electronic continuous monitor used long-term, keep it away from habitual combustion sources.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "My basement has a pellet stove that exhausts through the wall. Does the radon monitor need to be away from that?", "answer": "Yes. The exhaust penetration through the wall and the suction the stove creates while burning both affect local air patterns. Keep the monitor at least several feet from the stove and its exhaust wall penetration.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "We have a whole-house fan in the attic. Does running it affect basement radon readings?", "answer": "A whole-house fan pulls air from the living space up through the attic, which creates lower pressure inside the home. Lower indoor pressure relative to the soil can actually draw more radon in through the foundation. Running a whole-house fan might temporarily lower basement radon by flushing indoor air, but it could also briefly increase radon entry rate before the air exchange dominates. For long-term testing, normal home operation is the right condition.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "I put my monitor on a bookshelf but there are books packed tightly on either side of it. Does that matter?", "answer": "If books or other objects are blocking airflow immediately around the monitor, it may not be sampling the room air effectively - it's sampling a small microenvironment between the books. Give it at least a few inches of open space on all sides so air can circulate freely around the sensor intake.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "Should the monitor be on its own surface or can it share a shelf with electronics?", "answer": "Sharing a shelf is fine, but avoid placing it directly next to electronics that generate significant heat, like a cable box or amplifier. Heat from nearby electronics can affect some temperature-sensitive monitors and may reduce accuracy over time. A few inches of separation from heat-generating gear is a reasonable precaution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "My basement sometimes floods after heavy rain. Can I leave my monitor down there?", "answer": "If your basement takes on water during heavy events, the monitor should be at a height that keeps it safe from getting wet. Many consumer monitors are not waterproof. Beyond protecting the device, a basement that floods may have unusual radon patterns during and after flooding events due to shifting water table conditions. Test during normal dry conditions for the most representative chronic reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "I have a basement with high humidity - like 80% in summer. Does humidity affect the radon reading?", "answer": "Very high humidity can affect some monitor types, particularly electrochemical and certain ionization sensors. Most quality monitors handle normal to high residential humidity, but sustained 80%+ humidity is an unusual condition. Check your specific monitor's humidity operating range. If the basement is that humid, you also have a moisture problem worth addressing independently.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "My basement has a lot of natural light and a couple of large egress windows. Does that make it less risky for radon?", "answer": "Egress windows that are frequently opened increase natural ventilation and can lower radon levels in the space. It's a positive factor. But egress windows closed for winter months mean the benefit disappears when conditions are coldest and radon entry is often highest. Don't rely on windows you can't keep open year-round as a radon management strategy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "Can I put my radon monitor in a cabinet to protect it from being knocked over?", "answer": "An enclosed cabinet will have stagnant air and won't represent the room. Don't test inside a cabinet, even with the door cracked. The monitor needs to sample the free-flowing room air. If you're worried about it being knocked over, find a secure spot on a high shelf or desk rather than enclosing it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "My cat keeps knocking the monitor off the shelf. Any suggestions?", "answer": "Put it somewhere the cat can't reach - higher up, behind some kind of barrier, or in a room the cat doesn't enter during the test period. Repeated falls could damage the monitor, and frequent movement introduces variability into the reading. A securely placed monitor gives you better data and costs less in replacements.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "I have a radon monitor near my basement fish tank. Is that okay?", "answer": "A fish tank nearby introduces constant water vapor and some air movement from aerators and filters. Humidity from a large tank can affect some monitor types over time. Get a few feet of distance from the tank and check your monitor's humidity tolerance. It's probably fine, but not ideal right next to a large open-water surface.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "Can radon monitors be affected by other gases in the basement - like from a gas water heater or dryer?", "answer": "Radon monitors measure alpha particle radiation from radon decay - they're not gas sensors in the chemical sense. Natural gas or propane appliances don't directly interfere with radon detection. However, combustion appliances affect air pressure and circulation, which can affect radon transport in the space. Keep the monitor away from combustion equipment for placement reasons, not interference reasons.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Monitor Interference, Conditions, and Less Obvious Placement Pitfalls", "question": "My basement smells musty. Does mold affect radon readings?", "answer": "Mold growth doesn't produce radon or interfere with radon detection. The musty smell indicates a moisture problem that's worth addressing for its own health and structural reasons, but mold itself isn't a radon issue. They're separate concerns that often coexist in damp basements - address both independently.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace - Additional Depth", "question": "My crawlspace has rigid foam insulation on the floor joists above it. Does that help block radon?", "answer": "Rigid foam on the joists adds some resistance to air movement but doesn't reliably block radon. Foam insulation has many gaps around joists, wiring, pipes, and fastener holes that radon can pass through. It's not a radon barrier. Sub-membrane depressurization in the crawlspace is the reliable approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace - Additional Depth", "question": "My crawlspace contractor says I need a 20-mil vapor barrier instead of 6-mil for radon. Is that right?", "answer": "Thicker barriers are less permeable and more durable against punctures and long-term wear. For a true radon-control application, a thicker, reinforced barrier - often 20-mil or specialty radon-barrier products - performs better than standard 6-mil poly. If the contractor is recommending thicker material specifically for a radon application, that's the right thinking.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace - Additional Depth", "question": "My crawlspace vapor barrier has rips and gaps in it. Does that matter for radon?", "answer": "Yes. A damaged vapor barrier provides less resistance to gas movement than an intact one, and the depressurization system has to work harder to maintain suction under a leaky membrane. Gaps allow radon to escape sideways rather than being captured under the suction pipe. The barrier should be intact and well-lapped at seams.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace - Additional Depth", "question": "I have a partial vapor barrier in my crawlspace - maybe half covered. Is that better than nothing?", "answer": "Somewhat, but a partial barrier means the uncovered soil still releases radon freely into the crawlspace air. For a depressurization system to work well, full coverage is important. A partial barrier is an improvement over bare soil for moisture, but radon control requires full coverage with proper sub-membrane suction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace - Additional Depth", "question": "My crawlspace has gravel over the dirt. Does gravel reduce radon?", "answer": "Gravel is actually more permeable to gas than compacted soil, so a gravel layer can actually make it easier for radon to move through. A gravel sub-base is commonly recommended under the vapor barrier in crawlspace depressurization specifically because it helps the suction spread laterally. It's not a radon reducer on its own - it's a material that works with the depressurization system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace - Additional Depth", "question": "I was told to put sand under the crawlspace vapor barrier for radon. Does that make sense?", "answer": "Sand is sometimes used, similar to gravel, to create a uniform sub-membrane layer that allows the depressurization suction to communicate across the whole area. It makes more sense in the context of a depressurization system than as a standalone measure. On its own, sand under a barrier doesn't meaningfully reduce radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace - Additional Depth", "question": "My crawlspace runs under the whole footprint of the house. Does that mean I have more radon risk?", "answer": "A larger crawlspace footprint means more soil surface area in contact with the house, which generally means more potential radon entry area. However, the actual radon level depends on the geology - how much uranium is in your soil and how permeable it is. A large crawlspace with low-radon soil can test lower than a small crawlspace over high-radon geology.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace - Additional Depth", "question": "Can I depressurize a crawlspace that's divided into multiple sections by piers and beams?", "answer": "Yes, but the number of suction points needed depends on how well the sections communicate with each other. A contractor will typically do pressure diagnostics to determine whether suction from one point reaches all areas of the crawlspace. Multiple sections may require multiple suction points.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace - Additional Depth", "question": "My crawlspace has standing water half the year from a high water table. Is radon mitigation even possible in that condition?", "answer": "High water table crawlspaces are challenging but not impossible. The water conditions need to be addressed first - drainage, sump systems, etc. - before a vapor barrier and sub-membrane depressurization can be installed effectively. It's a two-phase project: water management first, then radon mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace - Additional Depth", "question": "Can I test for radon in a crawlspace home during summer if the crawlspace vents are open?", "answer": "Yes, and this is actually important context: summer testing with open crawlspace vents may give you a lower reading than winter closed conditions. If you want to understand your worst-case annual exposure, test in winter when the home is closed. A summer test on a vented crawlspace home can underestimate the annual average.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Crawlspace - Additional Depth", "question": "My crawlspace was converted to an unvented conditioned space. Do I now treat it like a basement for radon?", "answer": "Essentially yes. An unvented, conditioned crawlspace is a sealed, below-grade space that behaves more like a basement in terms of radon accumulation. The same principle applies: sub-membrane depressurization is the appropriate mitigation approach, and you should test the first-floor living space above it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Homes - Additional Depth", "question": "My slab has a crack that runs the full width of the family room. Is that the primary radon entry point?", "answer": "A through-crack like that is a significant potential entry point. It's likely contributing to your radon levels if you have them. Sealing it is a worthwhile step, but a long crack through a slab is difficult to seal completely and permanently - cracks can re-open with thermal movement. Sealing plus sub-slab depressurization is the more reliable solution for a cracked slab.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Homes - Additional Depth", "question": "The slab in my garage is connected to the slab under the house. Can radon travel from the garage slab into the house?", "answer": "Sub-slab pressure and gas can communicate across connected slab areas if there's continuity of the aggregate layer underneath. Radon entering from under the garage slab can migrate toward any suction point - including into the house interior. If your garage and house share a connected sub-slab zone, a mitigation system under the house can be designed to address both.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Homes - Additional Depth", "question": "I have expansion joints in my slab. Are those radon entry points?", "answer": "Yes. Expansion joints are intentional breaks in the concrete that allow movement - they're typically filled with a flexible material, but those fillers age, crack, and pull away. Expansion joints are known radon pathways. A mitigation contractor will typically address joint sealing as part of the work, in addition to installing sub-slab suction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Homes - Additional Depth", "question": "My slab home has radiant tubes embedded in the concrete. Does that complicate mitigation?", "answer": "It does complicate it. Drilling for a sub-slab suction pipe in a radiant slab requires knowing where the tubes are routed to avoid cutting them. A good contractor will use a thermal camera or the system drawings to map tube locations before drilling. It's more complex but mitigation is still feasible.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Homes - Additional Depth", "question": "Can the sub-slab aggregate under my slab be too thin for mitigation to work?", "answer": "Thin sub-slab aggregate can limit how well a single suction point communicates across a large area. A contractor doing diagnostic work will check communication by creating a small test hole and using a vacuum to measure how far pressure change extends. If communication is poor, more suction points may be needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Homes - Additional Depth", "question": "My slab home tested at 11 pCi/L. Is that really possible on a slab?", "answer": "Absolutely. High radon on a slab home is not unusual in certain geologies. The slab provides a direct soil-contact surface over the entire footprint of the house, and if there's substantial sub-slab aggregate and uranium-rich soil beneath, radon entry can be significant. 11 pCi/L is a result that should be addressed with sub-slab depressurization.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Homes - Additional Depth", "question": "My slab home is one story. Does that mean the whole house has radon at the slab level?", "answer": "The first floor is the entry level for a slab home, and yes, the whole first-floor living area is potentially exposed if radon is entering through the slab. There's no basement below to absorb the initial high-concentration air before it gets to living space. Every room on the first floor is worth understanding in the context of your overall radon level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Slab Homes - Additional Depth", "question": "I have a slab home and my kids' playroom is at floor level. Is playing on the floor worse for radon?", "answer": "At the extremes, radon does concentrate slightly closer to the floor. However, for residential radon levels, the difference between floor-level air and breathing-height air is generally modest. The more important factor is total exposure time. If your kids spend hours daily in that playroom, the overall concentration level matters more than whether they're sitting on the floor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartment and Multi-Unit - Additional Depth", "question": "I manage a 4-unit building with a basement unit. Am I responsible for testing?", "answer": "Landlord responsibilities for radon vary by state, but responsible management of a rental with a ground-floor or basement unit should include radon testing. It's the right thing to do, and in many states it's increasingly a legal expectation. Test the basement unit, and if elevated, address it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0236", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartment and Multi-Unit - Additional Depth", "question": "My apartment building has a communal basement laundry. The radon there is 9 pCi/L. Is that a problem if residents are down there for 20 minutes at a time?", "answer": "A brief, infrequent visit to do laundry at 9 pCi/L is far less of a cumulative concern than sleeping in a space at that level. However, if maintenance workers or staff spend significant time in that basement, it becomes more of an occupational exposure concern. And from a building management standpoint, that level in any shared space is worth addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0237", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartment and Multi-Unit - Additional Depth", "question": "I live on the ground floor of an old brownstone. The basement below is storage. Is radon a concern for my unit?", "answer": "Ground-floor units in brownstones and row houses often have their own slab or floor structure in partial contact with the soil, and basement-to-first-floor air communication through gaps is common in older construction. It's worth testing your unit specifically. The combination of old construction and ground-floor position makes this a reasonable concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0238", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartment and Multi-Unit - Additional Depth", "question": "I have a basement unit with a below-grade bedroom. The rest of the apartment is at grade. Where do I test?", "answer": "Test the below-grade bedroom first. That's the room with the most soil contact and likely the highest radon concentration. Also test the grade-level area if people spend substantial time there. The bedroom is priority because of sleeping hours.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0239", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartment and Multi-Unit - Additional Depth", "question": "My apartment complex tested common areas but not individual units. Is that sufficient?", "answer": "Common area results don't tell you about your specific unit. Radon can vary substantially from unit to unit depending on what's directly below each floor and how well each unit is sealed. Request testing specific to your unit, especially if you're on the first floor or in a basement apartment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0240", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartment and Multi-Unit - Additional Depth", "question": "Can radon come through the floor of a ground-floor apartment that's on a concrete slab?", "answer": "Yes. The same mechanisms that allow radon into any slab-on-grade home apply to a ground-floor apartment unit. The slab under your apartment is in contact with soil. If the geology produces radon and the slab has entry points, your unit can have elevated radon. Test it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0241", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartment and Multi-Unit - Additional Depth", "question": "I live in a basement apartment in Chicago and my test was 7.8 pCi/L. My landlord says that's just how basements are. Is he right that nothing can be done?", "answer": "That's not right. 7.8 pCi/L is significantly elevated and mitigation can reduce it substantially. Sub-slab depressurization works in apartment buildings just as it does in single-family homes. The landlord may need to address this at the building level, but \"that's just how basements are\" is not an accurate or acceptable response to an elevated radon level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0242", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartment and Multi-Unit - Additional Depth", "question": "My condo building is doing a renovation and digging up the basement floor. Should they be testing for radon as part of that project?", "answer": "Absolutely. Any time significant work is being done to a foundation or basement floor, it's a good moment to test for radon and, if elevated, incorporate radon mitigation into the renovation scope. Adding a sub-slab depressurization system while the floor is already opened is far less disruptive and expensive than doing it separately later.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0243", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartment and Multi-Unit - Additional Depth", "question": "I rent a studio apartment in a converted basement. The ceiling is only 7 feet. Does that affect radon risk?", "answer": "Ceiling height doesn't directly determine radon levels, but a lower-ceiling space with less overall air volume will see concentrations rise faster for a given entry rate compared to a high-ceiling space. It doesn't change what's fundamentally happening with radon entry, but it's one factor in thinking about overall air quality in a compact below-grade space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0244", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Apartment and Multi-Unit - Additional Depth", "question": "Is radon worse in a basement apartment with no ventilation windows?", "answer": "A basement apartment with no operable windows has no natural ventilation pathway, which means radon that enters has no dilution path out. If the HVAC system doesn't bring in meaningful outside air, levels can be higher than in a better-ventilated space. This is exactly the type of space where testing is most important.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0245", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "I have a geodesic dome home on a slab. Does the unique structure affect radon?", "answer": "The structure above the foundation doesn't change the radon dynamic - radon enters through the slab and any penetrations the same way it would in a conventionally framed house. A dome on a slab follows slab-home testing and mitigation principles. Place the monitor in the main living space at breathing height.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0246", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "I have a bermed earth-sheltered home. Is radon a bigger concern?", "answer": "Earth-sheltered homes have more soil-contact surface area - walls and roof may be in direct contact with the earth - which can provide more entry pathways for radon. These homes also tend to be very well-sealed for energy efficiency, limiting natural air exchange. Both factors can contribute to elevated indoor radon. Testing is especially important for earth-sheltered construction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0247", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "My tiny house is on a trailer. Is radon a concern?", "answer": "For a tiny house on wheels with a trailer frame floor - no slab, no soil contact - radon entry is limited. The floor assembly sits above air and the ground contact is minimal. The risk is much lower than a foundation-based home. If the tiny house is parked permanently with skirting enclosing a soil area underneath, that changes things somewhat.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0248", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "My tiny house is on a permanent foundation slab. Does that change the radon situation?", "answer": "Yes - permanently slab-founded tiny houses have the same soil contact issue as any slab home. The footprint is small, but radon doesn't distinguish between a small slab and a large one. Test in the main living area at breathing height.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0249", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "I live in a shipping container home on a concrete pad. Does that need radon testing?", "answer": "A shipping container home on a concrete pad is essentially a slab-on-grade situation. The concrete pad is in contact with soil, and radon can enter through the pad into the living space. Test it the same way you'd test any ground-contact slab home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0250", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "My log home is on a full basement. Where do I test?", "answer": "Same as any basement home - the lowest livable level. If you or family members spend time in the basement, test there. If the basement is only mechanical and you don't use it, test the first floor. The log construction of the walls above doesn't affect radon entry or testing strategy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0251", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "My farmhouse has a root cellar under part of the house. Is that relevant to radon?", "answer": "A root cellar is an excavated below-grade space with soil contact - potentially a significant radon entry point. If the root cellar connects to living space or shares air with the basement, radon entering there can migrate into the home. Test the basement or the connected living area to understand what you're dealing with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0252", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "My house has a wine cellar dug into the hillside below the basement. Should I worry about radon there?", "answer": "A below-grade wine cellar carved into rock or soil is in direct contact with the radon source. If you spend time down there, test it specifically. Even a space used just for storage and occasional visiting can accumulate high radon - just understand what the levels are if you're spending any time in that space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0253", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "I live in a duplex and own the top unit. The owner of the bottom unit has high radon. Should I worry about my unit?", "answer": "Your risk is lower than the ground-floor unit, and the radon entering through the lower unit's foundation won't typically reach your upper unit at meaningful concentrations. The primary entry is through soil contact, which your unit doesn't have. You don't need to panic, but a quick test of your own unit provides certainty.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0254", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "I own a duplex. My tenant is on the ground floor. Should I test?", "answer": "Yes. As the owner of a rental with a ground-floor unit, testing for radon is a responsible step and in many jurisdictions an increasingly legal one. If the ground floor comes back elevated, sub-slab mitigation from beneath that unit addresses the problem. Your upper unit won't need separate attention in most cases.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0255", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "My house has a sunken living room that's a couple steps below the main floor. Does it need separate testing?", "answer": "A sunken living room that's a few inches to a foot below the main floor level isn't significantly more radon-prone than the main floor - it's not in contact with soil. The radon risk in a sunken living room relates to whether the floor is on grade or above a basement or slab, same as the rest of the floor. No special treatment needed for the sunken aspect itself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0256", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "I have a studio home that's an above-garage apartment. Does radon come up from the garage?", "answer": "Attached garages are in contact with soil via their slab, and radon can accumulate in the garage space. If your living space is directly above the garage and the floor-ceiling assembly has gaps or penetrations, some radon from the garage can migrate up. It's worth testing your unit. The interface between garage and living space is a known air quality concern for several reasons beyond just radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0257", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "My house has a basement that's partially below a hill - the uphill side is fully buried, the downhill side has windows. Where's radon coming in?", "answer": "Radon is most likely entering through the fully buried uphill side, where the wall is in direct soil contact with no air gap. The downhill window side has more potential for natural ventilation. If you're trying to understand entry points, that buried uphill wall and the floor beneath it are the primary suspects.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0258", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "I'm building a new house. What should I tell my contractor about radon?", "answer": "Ask for radon-resistant new construction (RRNC) features: a gas-permeable layer under the slab, a polyethylene vapor barrier, sealing around all penetrations, and a passive vertical vent pipe from sub-slab to above the roofline. Rough in an electrical junction box near the vent pipe so a fan can be added easily if testing later shows it's needed. This adds minimal cost during construction but saves significantly on retrofit if you ever need to activate the system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0259", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "My builder says they've never had a radon complaint from their homes. Does that mean their construction is radon-safe?", "answer": "Not really. Radon complaints are rare because most homeowners don't test, so a builder hearing nothing doesn't mean their homes test well. It means no one complained - which is different from \"no one had elevated radon.\" Ask specifically whether they incorporate radon-resistant features and whether they test their completed homes. Those are the questions that tell you something meaningful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0260", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "How does new construction affect indoor radon levels compared to an older home?", "answer": "New construction can go either way. Newer homes are often more airtight, which can mean radon that enters stays in and concentrates more than in a drafty older home. But newer construction in jurisdictions that require radon-resistant features may also have better sub-slab protection than an older home. Don't assume new means low radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0261", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "I'm remodeling my basement and adding a bathroom. Should I think about radon during the remodel?", "answer": "Yes. During a remodel is the ideal time to run a passive radon rough-in pipe under the slab if one isn't already there, seal all penetrations as they're opened, and ensure any new floor-level elements are radon-aware. Adding a basement bathroom also adds a space where the floor drain could be a radon entry point - keep that in mind.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0262", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "If I seal all the cracks and penetrations in my basement, will that fix my radon?", "answer": "Sealing is a useful supplemental step, but it rarely solves an elevated radon problem on its own. Even a well-sealed concrete surface allows some diffusion, and new cracks can form over time. Sub-slab depressurization - which changes the pressure relationship between the soil and the house - is far more reliable than surface sealing as a primary strategy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0263", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "I've been sealing my basement floor for years with epoxy coatings. My radon is still 5.5 pCi/L. Why didn't it work?", "answer": "Because surface coatings address visible cracks and floor porosity, but radon also enters through the slab-wall joint, pipe penetrations, and sometimes through the wall itself. No amount of floor coating reaches those points. Sub-slab depressurization changes the pressure dynamic so radon is pulled away before it enters, regardless of where the entry points are.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0264", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "I put weatherstripping around my basement door and covered vents. My radon went up. What happened?", "answer": "You may have inadvertently reduced the natural air exchange that was diluting the radon coming in. Sealing the building envelope reduces ventilation, which can cause radon to accumulate faster than it was before. This illustrates why sealing alone isn't a solution - you need to address the entry at the source, not just reduce ventilation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0265", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "My HVAC contractor suggested positive pressurization of the basement to push radon back out. Does that work?", "answer": "Positive pressurization - blowing more conditioned air into the basement than the space can exhaust - can help reduce radon by maintaining higher pressure inside than under the slab. It does work to a degree, but it's energy-intensive and only functions as long as the system is running. It's not a permanent structural fix. Sub-slab depressurization is generally the more reliable and energy-efficient approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0266", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "Can a heat recovery ventilator (HRV) alone bring a 6 pCi/L basement down to acceptable levels?", "answer": "In some cases, yes - HRVs bring in significant amounts of outdoor air and can dilute indoor radon effectively. But the result depends on how much radon is entering per hour relative to the ventilation rate. At 6 pCi/L, I wouldn't rely on ventilation alone without testing after the HRV is installed to see if it's sufficient. Sub-slab depressurization addresses the entry; ventilation just dilutes what gets in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0267", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "My neighbor said their radon went down after they installed a bathroom exhaust fan in the basement. Could that be what fixed it?", "answer": "Possibly - an exhaust fan changes indoor air pressure and continuously exchanges some basement air. But this is an energy-expensive and inconsistent solution. A fan running 24/7 is also not what bath fans are designed for and will wear out quickly. If radon went down, it suggests the ventilation helped, but a proper mitigation system is more reliable and cost-effective long term.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0268", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "My basement tested at 2.2 pCi/L. Is that worth worrying about?", "answer": "2.2 pCi/L is low enough that many people choose not to act on it, and that's a defensible decision. The EPA says levels below 2.0 are where the risk is relatively low, and 2.2 isn't far from that. The EPA also notes that between 2.0 and 4.0, the risk is real enough to consider action. I wouldn't call it urgent at 2.2, but if you're planning to spend many years in the home or have young kids sleeping in the basement, it's worth keeping an eye on. Re-test periodically.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0269", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "I've been in my house 20 years and never tested. Should I test now?", "answer": "Absolutely. It's never too late to test, and knowing your current level is useful regardless of history. If levels are elevated, reducing your ongoing exposure from this point forward is a meaningful benefit even if there was past exposure you couldn't have known about. Get the test done.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0270", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "My radon came back as 4.0 exactly. Right on the line. What do I do?", "answer": "The EPA action level is 4.0 pCi/L, and 4.0 exactly puts you right on it. I'd treat it as actionable. Test conditions vary and the actual long-term average might be slightly above or below - the margin of measurement uncertainty at that level doesn't give you confidence that you're truly below the threshold. If you want more certainty, run a long-term test to see what the annual average looks like. Otherwise, at 4.0 I'd proceed with mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0271", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "How do I explain radon to my elderly parent who doesn't understand it?", "answer": "Radon is a gas that comes out of the ground under the house. It's invisible and odorless, so you can't tell it's there. It doesn't make you feel sick right away, but breathing it for years increases the chance of getting lung cancer. We test for it with a simple device, and if the level is high, a contractor can fix it with a pipe and fan system that pulls the gas out from under the house before it gets inside. It takes a few hours to install and works quietly in the background.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-placement-crawlspace-slab-apartment-0272", "phase": "phase3", "type": "answered_qna", "topic": "workflow-placement-crawlspace-slab-apartment", "category": "workflow-placement-crawlspace-slab-apartment", "subtopic": "Unique Home Types - Additional Depth", "question": "I want to test but I'm nervous about what the results might say. Is it better not to know?", "answer": "I understand that impulse, but no - it's better to know. If your levels are low, you get peace of mind. If they're elevated, you can fix it. Radon is one of the few serious environmental health risks that's both measurable and fixable. Not knowing doesn't protect you; it just means exposure continues unchecked. The test is simple and inexpensive, and the fix - if needed - is straightforward. Knowledge lets you act.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "workflow-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "What is the RadonEye RD200?", "answer": "The RadonEye RD200 is a consumer continuous radon monitor made by a South Korean company called FTLab. It uses a pulsed ionization chamber to detect radon, which is generally considered a more sensitive detection method than most other consumer monitors. It displays readings on a small screen and connects to a smartphone app over Bluetooth. It's become pretty popular with home inspectors and homeowners who want faster, more detailed feedback than older plug-in monitors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "How does RadonEye actually measure radon?", "answer": "It uses a pulsed ionization chamber, which detects individual alpha particles - the kind of radiation radon gives off as it decays. That method tends to pick up changes in radon levels faster and with more precision than the passive electret or basic sensor types used in cheaper monitors. It doesn't mean the number is always exactly right to the decimal, but the technology is solid and it's one of the reasons it got traction with inspectors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "Is RadonEye good for a homeowner who just wants to know if their basement is safe?", "answer": "It's a solid choice. It's easy to set up, the app is straightforward, and the reading updates faster than a lot of other consumer monitors. For a homeowner who wants to keep an eye on things long-term, it works well. Just remember that any single reading - especially in the first day or two - is a snapshot, not a verdict. Give it several days before drawing conclusions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "Why do people say RadonEye responds faster than Airthings?", "answer": "The main reason is the detection technology. RadonEye uses a pulsed ionization chamber, which is more sensitive to individual decay events. Airthings uses silicon photodiode sensors, which are good but tend to average out more slowly. In practice, RadonEye users often see meaningful readings within a few hours, while Airthings units can take longer to stabilize. For real estate testing where time matters, that speed difference is real and useful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "What's the difference between the RD200 and the RD200P?", "answer": "The RD200P added some connectivity improvements and generally represents a newer iteration of the RD200. Both use the same core pulsed ionization chamber technology and Bluetooth/app setup. If you're buying new, the P version is typically the current model. If you find an original RD200 used, it's still a capable monitor - the core tech is the same.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "Does RadonEye have a Plus model?", "answer": "Yes, the RadonEye Plus (sometimes shown as RD200N or similar) added Wi-Fi connectivity on top of Bluetooth, which lets it log data without your phone needing to be in range. That's useful if you want to monitor a property remotely or want continuous cloud logging without having to open the app manually. For most homeowners, the standard Bluetooth model is plenty.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "Can RadonEye run without the app?", "answer": "Yes. The device itself runs continuously and displays a reading on its built-in screen even without a phone nearby. The app is optional - it gives you graphs, historical data, and notifications, but the monitor does its job without it. Plenty of people set it up, check the app a few times a day, and leave the device running on its own.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "How does the RadonEye display reading work?", "answer": "The screen shows your current radon level in pCi/L (or Bq/m³ depending on settings). It typically shows the most recent average rather than a raw instantaneous count. Early on - first few hours - that reading will jump around as the sensor accumulates data. After 24 to 48 hours, the display settles into a more reliable rolling average. The reading on the screen is what you look at; don't get too anxious about early fluctuations.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "Is the RadonEye a professional-grade monitor?", "answer": "It's a prosumer device - more capable than basic plug-and-forget monitors, used widely by professionals, but it's not the same as a certified continuous radon monitor (CRM) used by licensed mitigators. Licensed professionals use CRMs that are calibrated on a defined schedule and meet specific regulatory standards. RadonEye is excellent for ongoing homeowner use and popular with inspectors, but it shouldn't be the sole device cited on a formal mitigation report in most states.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "My RadonEye reading just says 0.0 - is it broken?", "answer": "Not necessarily. In very low-radon environments, the reading can briefly display 0.0 while the sensor is accumulating counts. If it stays at 0.0 for more than several hours and your environment has any reasonable radon level at all, there may be a sensor issue. Make sure the device has been running for a while and check the app for any error indicators. If it's genuinely stuck at zero, contact FTLab support or the retailer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "Can I use RadonEye upstairs or does it have to go in the basement?", "answer": "You can place it anywhere, but radon levels are almost always highest in the lowest livable level of the home - that's typically the basement or the lowest floor people spend time in. Placing it upstairs will usually show lower numbers than the basement, which could give you a false sense of security if the basement is where the problem is. Test where you're most concerned, and if you're unsure, start in the basement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "How accurate is RadonEye?", "answer": "It's among the more accurate consumer monitors available, but it's still a consumer device. The pulsed ionization chamber technology is legitimate and well-regarded, and RadonEye has performed well in third-party comparisons. Even so, no consumer device is a precision calibrated instrument - expect some variability, especially day to day as actual radon levels naturally fluctuate. For a general picture of your home's radon situation, it's reliable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "Does RadonEye have a backlight so you can see it in the dark?", "answer": "The RD200 series has a screen, and the app shows you the data regardless of ambient light. The physical screen visibility varies - some people use the app for nighttime checking rather than looking at the device directly. It's worth checking your specific model's display specs if that matters to you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "I've seen RadonEye recommended in home inspection forums - is it actually used by inspectors?", "answer": "Yes, it's become one of the more popular monitors among home inspectors. The faster response time and app connectivity make it practical for the short windows inspectors have at a property. Even so, inspectors in states with strict radon testing protocols may be required to use specific certified equipment, so it depends on the state and the inspector's approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "What does the LED light on RadonEye mean?", "answer": "The LED indicator on the RadonEye gives you a quick visual status without pulling out your phone. Green generally indicates a normal, lower reading; the color shifts to indicate higher levels. Check the manual for your specific model since the exact behavior can vary slightly between versions. It's basically a quick-glance alert system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "Can I put RadonEye in a crawl space?", "answer": "You can, but crawl spaces are tough environments - humidity, dust, temperature swings. If you want long-term data from a crawl space, make sure the monitor is protected from moisture and not sitting directly on the ground. Most people monitor the livable space above the crawl rather than inside it. If you suspect the crawl space is a significant radon source, that's a question for a mitigator who can assess the sub-slab conditions directly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "My RadonEye is reading 9.1 pCi/L - should I be panicking?", "answer": "That's a high reading and worth taking seriously, but panicking doesn't help. Radon is a long-term lung-cancer risk from cumulative exposure over years - it doesn't cause immediate symptoms. At that level, the EPA would strongly recommend mitigation. Let the monitor run for a few more days to confirm the reading isn't an anomaly, then call a mitigator. Don't sleep in that basement while you're figuring it out, but there's no emergency in the next hour.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "How long does it take for RadonEye to give a reliable reading?", "answer": "Most people find the reading starts to stabilize meaningfully after about 24 hours. For higher confidence, a 48 to 72 hour run gives you a better picture. The very first few hours are noisy as the sensor accumulates counts. The app's graph will show you how the average has been trending - a relatively steady line over 24+ hours is a good sign you're seeing real data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "My RadonEye is reading 2.3 - do I need to do anything?", "answer": "The EPA says levels between 2.0 and 4.0 pCi/L are worth considering mitigation - the risk is lower than above 4.0, but it's not zero. At 2.3, you're not in the red-alert zone, but it's a reasonable time to start thinking about whether mitigation makes sense for your situation. Keep the monitor running for a few more days and see if the average holds around that level, then decide.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "Is RadonEye approved for use in real estate transactions?", "answer": "It depends on the state and the transaction type. Many states have specific requirements for radon testing in real estate - some require a licensed tester using certified equipment, a 48-hour closed-house test, and a formal report. RadonEye is not typically a substitute for that formal process even though it's a capable monitor. If it's for your own peace of mind, great. If it's for a real estate closing, check your state's requirements.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye RD200 - What It Is and How It Works", "question": "What is the RadonEye app called and where do I get it?", "answer": "The app is called RadonEye and it's available on both iOS and Android. Search for it by name in your app store. It connects to the monitor over Bluetooth and shows you real-time readings, historical graphs, and lets you set alarm thresholds. Setup is straightforward - open the app, enable Bluetooth, and the monitor should appear for pairing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "How do I set up RadonEye with my iPhone?", "answer": "Download the RadonEye app from the App Store, make sure Bluetooth is turned on on your phone, and power up the RadonEye device. Open the app and it should detect the monitor automatically and prompt you to pair. If it doesn't show up, try restarting Bluetooth or getting closer to the device. Once paired, the app will start showing live data and building a history graph.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "My RadonEye won't connect to the app - what do I do?", "answer": "First, make sure Bluetooth is enabled on your phone and that you're within range - Bluetooth is line-of-sight and range-limited, so being in the same room helps. Try closing and reopening the app. If it still won't pair, restart both the phone's Bluetooth and the RadonEye device. Some users have found that if the device is already paired to another phone, they need to forget the device on the original phone first before a new one can connect.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "Does RadonEye need Wi-Fi?", "answer": "The standard RD200 and RD200P use Bluetooth only - no Wi-Fi needed. The RadonEye Plus model added Wi-Fi for remote monitoring and cloud data logging. If you just want to check readings when you're home, the standard Bluetooth model is fine. If you want to monitor a property you're not always at, the Plus model's Wi-Fi is worth considering.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "Can I export my RadonEye data?", "answer": "Yes, the RadonEye app has a data export feature that lets you pull out your historical readings. This is useful if you want to share the data with a mitigator or keep your own records. The exported data typically covers the full history stored in the app. Check the app's settings or menu for the export option - it's usually a CSV or similar format.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "Can more than one person connect to the same RadonEye with the app?", "answer": "The Bluetooth connection is point-to-point, so only one device can be actively connected at a time. You can't have two phones simultaneously viewing live data. Even so, the data is stored on the device and both phones can pull the history when connected at different times. If you need shared access with a partner or family member, whoever opens the app when in range will see the current data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "Does RadonEye store data when the app is closed?", "answer": "Yes. The device logs data continuously regardless of whether your phone is connected or the app is open. When you reconnect, the app syncs the stored history. So you don't need to have the app running in the background - the monitor does its job independently.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "Can I set a radon alarm in the RadonEye app?", "answer": "Yes, the RadonEye app lets you configure notification alerts. You can set a threshold level, and if the rolling average exceeds it, the app can send you a notification. You need to have the app installed and notifications enabled for this to work. The device itself also has a built-in alarm that activates at a certain level, independent of the app.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "My RadonEye app keeps losing connection - is that normal?", "answer": "Bluetooth connection drops are pretty common if your phone is out of range or the app isn't actively open. The monitor keeps running and logging data; the app just syncs when you come back into range. If it's dropping even when you're standing next to the device, try clearing the app cache or reinstalling it. The connection quality also depends a bit on your phone model and Bluetooth interference in the area.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "How far away from RadonEye does Bluetooth still work?", "answer": "Typical Bluetooth range is roughly 30 feet in open space, but walls, floors, and other electronics reduce that. If your phone is in the same room or right above/below the device, it should connect reliably. Don't count on a connection from two floors away. If you need remote monitoring across the house or when you're not home, that's when the Wi-Fi-enabled Plus model becomes useful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "Does RadonEye work with Apple Health or Google Fit?", "answer": "Not that I'm aware of - RadonEye's app is its own ecosystem and doesn't appear to integrate directly with health platforms. The data stays within the RadonEye app or can be exported as a file. That's fine - radon monitoring is really about tracking levels in your home over time, not syncing with a fitness tracker.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "Can I use RadonEye to monitor my home from another state while I'm traveling?", "answer": "With the standard Bluetooth model, no - you have to be within Bluetooth range. If remote monitoring is important to you, the RadonEye Plus with Wi-Fi would let you check readings from anywhere via the app. Some people pair a basic RadonEye with a smart plug so they can power-cycle it remotely, but that doesn't help with data access. Wi-Fi is the right tool for remote monitoring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "How do I read the graph in the RadonEye app?", "answer": "The app shows a time-based graph of your radon readings. The horizontal axis is time, the vertical axis is the radon level in pCi/L. What you're looking for is the general trend over time - not any single spike. Radon levels naturally fluctuate with weather, wind, barometric pressure, and ventilation, so some up-and-down on the graph is completely normal. A consistently high average over several days is what you pay attention to.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "My RadonEye app shows a spike to 15 pCi/L for one hour - should I be worried?", "answer": "A single short spike is usually not a cause for alarm by itself - radon levels fluctuate, and sometimes weather events like a sudden pressure drop can push levels temporarily high. Look at the overall average over 24 to 72 hours. If the average stays significantly elevated, that's more meaningful than any single spike. If the average is consistently above 4.0, it's worth calling a mitigator.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "How long should I leave RadonEye running before trusting the reading?", "answer": "Give it at least 24 hours before drawing any conclusions, and 48 to 72 hours is better. The first few hours are noisy as the sensor stabilizes. The longer it runs, the more reliable the average becomes. For a real sense of your home's baseline, a week of data is genuinely useful - you'll see how levels change with weather and window use.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "My RadonEye reading jumped from 2.1 to 8.3 overnight - is it broken?", "answer": "Probably not broken. Radon levels can swing dramatically overnight - sealed houses, changes in barometric pressure, and weather fronts can all cause spikes. Nighttime readings are often higher than daytime because ventilation is lower and outdoor pressure changes affect how radon enters. Look at the 24 or 48-hour average in the app rather than fixating on the peak reading. If the average is staying consistently high, that's worth addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "Is RadonEye accurate compared to a professional test?", "answer": "It compares reasonably well in most third-party evaluations. The pulsed ionization chamber is a solid detection method and it's not a toy. Even so, there will always be some variance between any two monitors placed in the same spot at the same time - that's true of professional equipment too. For tracking your home's radon situation over time, RadonEye is reliable. For a formal mitigation report or real estate test, you want certified professional equipment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "What units does RadonEye display - pCi/L or Bq/m³?", "answer": "Most RadonEye units sold in the US default to pCi/L, which is the unit Americans are most familiar with. The app typically lets you switch between pCi/L and Bq/m³. The EPA uses pCi/L for its guidelines - 4.0 pCi/L is the action level. If you see numbers in the dozens or hundreds, you may have the unit set to Bq/m³ (148 Bq/m³ is roughly equal to 4.0 pCi/L).", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "I put my RadonEye in the middle of my basement - is that a good spot?", "answer": "Middle of the basement is reasonable. Try to avoid placing it directly on the floor, near a sump pit, or directly against an exterior wall. A few feet off the floor on a shelf or table is the standard recommendation. Keep it away from heavy air movement sources like HVAC vents or windows. The idea is to measure the air you and your family actually breathe in that space, not air that's being flushed out or concentrated near a specific entry point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "My neighbor has a RadonEye reading 1.2 and mine shows 5.6 - how can we be so different?", "answer": "Radon levels vary enormously house to house, even next door to each other. It depends on the soil under each specific foundation, the construction type, how tight the house is, and ventilation habits. Shared geology in a neighborhood means neighboring homes can have similar risk, but one home having a crack or gap that another doesn't can make a big difference. Your neighbor's low reading doesn't mean yours isn't real.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "My RadonEye reading has been between 3.8 and 4.2 for two weeks - what does that mean?", "answer": "It means your home's radon level is sitting right at the EPA's action level of 4.0 pCi/L. That's the threshold above which the EPA recommends mitigation. At 3.8 to 4.2, you're right on the line, and it's a reasonable time to talk to a mitigator and get their take on whether mitigation makes sense for your situation. The risk between 3.8 and 4.2 isn't dramatically different, but you're consistently at a level that warrants a conversation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "Does RadonEye give a short-term or long-term reading?", "answer": "RadonEye gives continuous real-time readings and builds a running average, which is a different thing than the traditional short-term (2-7 day) or long-term (90+ day) test. Its rolling average is updated as new data comes in. Over time, the average it displays reflects your home's actual conditions quite well. It's most useful when you've had it running for weeks or months - at that point the data is more comparable to what a long-term test would show.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "Can I compare my RadonEye to a charcoal test kit to verify it?", "answer": "Yes, that's a reasonable sanity check. Place a charcoal canister test in the same area as the RadonEye for the required exposure time, send it to the lab, and compare the results. Don't expect them to match exactly - different methods have different time windows and uncertainties - but they should be in the same ballpark. A large discrepancy (more than double, or vastly different direction) would be worth investigating.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "My RadonEye reading went way down after I opened a window - does that mean the radon is gone?", "answer": "No. Opening windows dilutes radon by bringing in outdoor air, which is naturally much lower in radon. Closing the house back up will typically cause levels to rise again. This is why radon tests are supposed to be conducted under closed-house conditions - to give you the real baseline you're actually living with most of the year. Ventilating is a temporary measure, not a fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "My RadonEye has been reading around 0.4 for months - is that normal and trustworthy?", "answer": "0.4 pCi/L is very low - outdoor air typically averages around 0.4 pCi/L nationally, so that's about as clean as it gets. If your basement or living space is reading that consistently, you're in good shape. A sustained low reading on a device that's been running for months is a reliable result. No need to do anything different.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye App, Bluetooth, and Data", "question": "Does RadonEye change its reading based on temperature or humidity?", "answer": "Environmental conditions do affect radon transport and sensor behavior to some degree. Very high humidity can affect ionization chamber sensors over time. RadonEye is designed to function in normal residential conditions. Extreme conditions - like a very wet basement - could affect the reading or the long-term health of the device. Keep it in a reasonably dry location.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Alarms and Real-Life Scenarios", "question": "My RadonEye alarm went off at 3 AM - what do I do?", "answer": "Don't panic. First, note the reading on the device or app. A middle-of-the-night alarm is often triggered by a barometric pressure change overnight that temporarily pushed radon levels up. Open a window in that area for a bit to ventilate, and check the running average over the past 24 hours in the app - that's the number that matters more than the spike that triggered the alarm. If the average is consistently high, schedule a call with a mitigator.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Alarms and Real-Life Scenarios", "question": "My dad's RadonEye is reading 6.8 - should I tell him to call someone?", "answer": "Yes, at 6.8 pCi/L it's definitely worth calling a mitigator. That's well above the EPA's 4.0 pCi/L action level. The good news is that mitigation works - a sub-slab depressurization system typically brings levels down significantly. Radon doesn't cause immediate symptoms, so there's no emergency in the next few hours, but getting it addressed sooner rather than later reduces cumulative exposure. Tell him to call a local licensed mitigator and get an assessment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Alarms and Real-Life Scenarios", "question": "My RadonEye beeped twice and then went quiet - what happened?", "answer": "The device may have briefly exceeded your configured alarm threshold and then the level dropped back down. Check the app's history to see what the reading was doing around that time. If it was a brief spike that resolved, you may not need to do anything right away. If you see repeated alarms or a sustained elevated average, that's the signal to take action. The app history is your best diagnostic tool.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Alarms and Real-Life Scenarios", "question": "How do I set the alarm threshold on RadonEye?", "answer": "Open the RadonEye app, navigate to the settings or alarm section, and you'll find an option to set a threshold level. When the device's average reading exceeds that level, it can trigger both the app notification and the device's own audible alarm. The EPA's action level is 4.0 pCi/L, so many people set their threshold there or slightly below it. Setting it too low will result in frequent false alarms since radon naturally fluctuates.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Alarms and Real-Life Scenarios", "question": "The RadonEye alarm keeps going off in my finished basement - is it a sensor problem or a real reading?", "answer": "Check the app history first. If you see consistently elevated readings - not just brief spikes - it's likely a real reading, not a sensor problem. Finished basements can actually have worse radon accumulation than unfinished ones because they're more airtight. If the alarm is triggering repeatedly on a sustained high average, take the reading seriously and call a mitigator for a professional assessment. If it's only brief spikes, it may just be natural fluctuation crossing your threshold.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Alarms and Real-Life Scenarios", "question": "Can the RadonEye alarm wake you up if it goes off at night?", "answer": "The built-in audible alarm on the RadonEye can be heard if you're in the same room or nearby. Whether it wakes you from sleep depends on how close it is and how deeply you sleep. The app notification will also alert your phone if you have it enabled and your phone is nearby. Many people place the device in the basement and rely primarily on the app notifications rather than expecting the device alarm to wake them upstairs.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Alarms and Real-Life Scenarios", "question": "My RadonEye has been alarming every night for a week - what's going on?", "answer": "A week of repeated nighttime alarms suggests this isn't just a brief weather-driven spike - it likely means your home's radon levels are genuinely elevated and hitting your threshold regularly. At this point it's time to call a mitigator. Repeated alarms aren't a sensor glitch; they're the device doing exactly what it's supposed to do. The question now is what the average reading is and whether it's above 4.0 pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Alarms and Real-Life Scenarios", "question": "I just moved into a new house and my RadonEye is reading 7.2 - the previous owners said they never tested", "answer": "That's a concerning reading and unfortunately common - many sellers simply don't test and aren't aware. At 7.2 pCi/L, mitigation is strongly recommended. The good news is you caught it early with your own monitor. Get a professional assessment and likely a mitigation system installed. This is a very solvable problem, and a properly installed system will typically bring that level down substantially.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Alarms and Real-Life Scenarios", "question": "Should I put my RadonEye in my bedroom or basement?", "answer": "Radon is typically highest in the basement, so that's where it's most useful to monitor. Your bedroom, if it's above grade, will generally show much lower levels. If you're specifically concerned about a bedroom that's in a walkout basement or partially below grade, that's worth monitoring too. Most people start in the lowest level and then move the monitor around to understand the whole picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Alarms and Real-Life Scenarios", "question": "My RadonEye is reading 4.1 - is that close enough to 4.0 that it doesn't matter?", "answer": "The EPA's 4.0 pCi/L action level isn't a cliff edge - 4.1 isn't dramatically more dangerous than 3.9. But 4.1 is above the action threshold, which means mitigation is recommended. Whether you act on a reading that close to the line is ultimately your call, but the EPA's guidance is clear: above 4.0, fix it. If you're unsure, talk to a mitigator about your specific situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Alarms and Real-Life Scenarios", "question": "Does RadonEye alarm based on a peak reading or an average?", "answer": "The alarm is based on a rolling average, not a single instantaneous spike. This is by design - triggering on a single spike would cause constant false alarms since radon fluctuates. The rolling average needs to exceed your threshold before the alarm sounds. This is actually the right way to do it; averages are more meaningful than peaks for assessing long-term exposure risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye in Real Estate and Professional Use", "question": "Can a home inspector use RadonEye for a real estate radon test?", "answer": "Some inspectors use RadonEye as part of their process, and in some states that's acceptable. In many states, however, real estate radon tests must follow specific protocols - licensed tester, certified equipment, closed-house conditions, formal written report. RadonEye doesn't automatically qualify as a substitute for that process. A good inspector will know their state's requirements. If you're the buyer, ask specifically whether the test meets your state's regulations.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye in Real Estate and Professional Use", "question": "A home inspector left a RadonEye in the house for 48 hours - is that a valid test?", "answer": "It depends on your state. Some states accept continuous monitor results from inspectors who are properly licensed to use them. Others require specific certified equipment or protocol. The 48-hour closed-house window is a common standard. If the inspector is licensed to conduct radon tests in your state and their methodology meets state requirements, it may be valid. If you're unsure, ask for a copy of their credentials and the protocol they followed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye in Real Estate and Professional Use", "question": "Is RadonEye vs professional CRM monitors - what's the real difference?", "answer": "Professional CRMs (certified continuous radon monitors) are calibrated on a regular schedule, meet regulatory standards, and produce reports with chain of custody documentation. RadonEye is a high-quality consumer device that uses similar detection technology but doesn't go through the same certification and calibration process. The technology gap is narrower than it used to be, but the regulatory and documentation framework around CRMs is what makes them the required tool for formal real estate and legal purposes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye in Real Estate and Professional Use", "question": "My real estate agent said I need a \"certified radon test\" - does RadonEye count?", "answer": "In most cases, no. A certified radon test typically means a test conducted by a licensed professional using equipment that meets your state's certification standards. Consumer monitors, including RadonEye, generally don't satisfy that requirement for real estate transactions. You'd need to hire a licensed radon tester to conduct a formal test. That's usually a separate service from a general home inspection.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye in Real Estate and Professional Use", "question": "I'm a home inspector - should I buy a RadonEye?", "answer": "It's a popular choice among inspectors for good reason - fast response, reliable technology, good app. Whether you can use it as your primary radon testing tool depends entirely on your state's licensing and equipment requirements. Some states are permissive; others require specific certified devices. Check your state's radon program requirements before relying on it for client reports.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye in Real Estate and Professional Use", "question": "Does RadonEye meet EPA standards for radon testing?", "answer": "The EPA doesn't directly certify specific consumer devices. The more relevant standard is whether the device and testing method meet your state radon program's requirements. EPA has guidelines for testing methodology (closed house, appropriate placement, minimum test duration) but doesn't maintain a device certification list. State-specific certification programs vary.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye in Real Estate and Professional Use", "question": "My RadonEye and the inspector's professional monitor showed different numbers - which one is right?", "answer": "Both are probably \"right\" within their measurement uncertainty. Radon levels vary by location within a space and fluctuate over time. If the two monitors were in different spots or measured at different times, some variation is expected. If both are showing elevated levels, that's the meaningful finding. A large discrepancy - one showing 1.0 and the other showing 7.0 in the same space - would warrant checking placement and methodology.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye in Real Estate and Professional Use", "question": "Is RadonEye used in commercial properties or just homes?", "answer": "RadonEye is primarily marketed for residential use. Commercial radon testing typically involves more complex protocols and larger spaces. For a small office space or retail location, a RadonEye could give you useful baseline data, but formal commercial testing generally requires certified professionals and specific protocols. It's a starting point, not a formal commercial test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Age, Maintenance, and Replacement", "question": "My RadonEye is 4 years old - should I replace it?", "answer": "Four years isn't ancient for this type of device, but it's worth considering. The manufacturer hasn't published a hard end-of-life date, but ionization chamber sensors can drift over time. If you've had it four years without cross-checking against another test, now would be a good time to run a charcoal canister test alongside it and see if the results are in the same ballpark. If they diverge significantly, consider replacing the RadonEye.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Age, Maintenance, and Replacement", "question": "How long does RadonEye last?", "answer": "FTLab hasn't published a hard lifespan number that I've seen. Consumer radon monitors generally perform reliably for several years, and many users report good results after five or more years. The best way to verify an older device is to cross-check it against a charcoal canister test. If it's way off, replace it. If it tracks well, keep using it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Age, Maintenance, and Replacement", "question": "Does RadonEye need to be calibrated?", "answer": "Like all radon monitors, performance can drift over time. The manufacturer's official recommendation is to periodically cross-check the device. Some professional organizations recommend recalibrating or replacing consumer monitors every few years. There isn't a consumer-facing calibration service for RadonEye the way there is for certified professional monitors. The practical approach is to cross-check it against a certified charcoal test every few years and replace it if the reading is significantly off.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Age, Maintenance, and Replacement", "question": "My RadonEye got wet - is it still good?", "answer": "Exposure to significant moisture can damage the ionization chamber sensor. If the device got splashed or was in a very humid environment for a long time, the reading may be unreliable. Let it dry out completely for a day or two and compare its reading to a fresh charcoal test to see if it's still accurate. If there's any doubt, err on the side of replacement - a new monitor is a much smaller expense than the uncertainty of a damaged one giving you a false sense of security.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Age, Maintenance, and Replacement", "question": "Does RadonEye have a battery or does it plug in?", "answer": "The standard RadonEye RD200 is battery-powered. Battery life varies, but it typically runs for many months on a set of batteries under normal operation. The device will indicate when the battery is low. There is no backup battery issue during power outages since it runs on batteries. If you need it running long-term without battery changes, some users keep it near a USB power source and use a compatible power setup.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Age, Maintenance, and Replacement", "question": "My RadonEye's battery died - will it keep the data?", "answer": "Most electronic monitors store data in non-volatile memory, which means the history is preserved even when the battery runs out. When you replace the batteries and reconnect to the app, the historical data should still be there. It's worth checking your specific model's documentation to confirm, but data loss from a dead battery is generally not a concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Age, Maintenance, and Replacement", "question": "Where do I buy a replacement RadonEye?", "answer": "RadonEye monitors are sold through several online retailers - Amazon being the most common US source. The FTLab website also lists authorized sellers. Buying from a reputable seller with a return policy is worth it for a device like this - a bad counterfeit could give you completely false readings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "RadonEye Age, Maintenance, and Replacement", "question": "I dropped my RadonEye down the basement stairs - is the reading still trustworthy?", "answer": "A physical shock to an ionization chamber device could potentially shift the sensor's calibration. If it was a significant drop, I'd cross-check the reading against a charcoal canister test before relying on it. If the reading looks way off compared to what it was before, or if the device has visible damage, it may be time to replace it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "What is the Ecosense EcoQube?", "answer": "The Ecosense EcoQube is a consumer continuous radon monitor made by Ecosense Inc. It uses a technology called a diffusion chamber with an alpha particle detector, and it's known for being compact and user-friendly. It has a color-coded display system that makes reading interpretation simple - green means low, yellow means moderate, red means act. It connects to a smartphone app and is popular with homeowners who want an at-a-glance radon indicator.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "How does the EcoQube measure radon?", "answer": "EcoQube uses a passive diffusion chamber where air enters naturally, and the device detects alpha particles from radon decay. It builds a rolling average reading that updates over time. Like other consumer continuous monitors, it takes several hours to build up a statistically meaningful count, so early readings in the first few hours should be treated as preliminary.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "What is the EcoQube Flex - how is it different from the regular EcoQube?", "answer": "The EcoQube Flex is a newer model from Ecosense designed to be more flexible in placement and form factor. It tends to have a different physical design while using similar detection technology. The Flex was aimed at making the device easier to place in different locations around the home. Both connect to the Ecosense app. If you're buying new, check current availability - Ecosense's product lineup has evolved over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "What is EcoBlu?", "answer": "EcoBlu is another product from the Ecosense family, generally positioned as an entry-level or more affordable option in their lineup. It uses similar radon detection principles but may have a different feature set or form factor than the EcoQube. Check the Ecosense website for the current specifications of each model since their lineup has been updated over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "Does Ecosense have an app?", "answer": "Yes, Ecosense has a companion smartphone app that connects to their monitors via Bluetooth. The app shows current readings, historical data graphs, and uses color coding to help interpret the results. It's available on iOS and Android. Setup is similar to other Bluetooth monitors - download the app, enable Bluetooth, and follow the pairing instructions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "How do I set up the Ecosense app?", "answer": "Download the Ecosense app from the App Store or Google Play. Power on your EcoQube device, enable Bluetooth on your phone, and open the app. It should detect and prompt you to connect to the device. Follow the in-app setup steps. If the device doesn't appear, make sure you're close to it and Bluetooth is on. Once connected, the app will start displaying data and building history.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "What does the color coding on Ecosense mean?", "answer": "Ecosense uses a color coding system to translate the pCi/L reading into an easy-to-understand status. Green generally indicates a lower radon level, yellow indicates a moderate level worth watching, and red indicates a level that warrants action. The specific thresholds behind each color roughly align with EPA guidance - red starting at or above 4.0 pCi/L is typical. The app shows the colors alongside the actual number so you always have both.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "My Ecosense is showing red - does that mean I have a serious problem?", "answer": "Red means your radon level is in the range where the EPA recommends action - typically at or above 4.0 pCi/L. It doesn't mean there's an emergency happening right now, but it does mean you should take the reading seriously. Let the device run for a full 24 to 48 hours to confirm the average, then contact a licensed mitigator. Radon is a long-term health risk, not an immediate one, but red is the signal to stop waiting and start acting.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "How long should I run Ecosense before trusting the reading?", "answer": "Give it at least 24 hours before putting much stock in the reading. The first few hours are the noisiest as the sensor accumulates alpha particle counts. At 24 hours you have a reasonable indication; at 48 to 72 hours you have a reliable short-term average. The longer it runs, the more the average reflects your home's real baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "What does a green reading on Ecosense actually mean in pCi/L?", "answer": "Green typically corresponds to levels below 2.0 pCi/L, which is considered the lower risk range. The national average indoor radon level is around 1.3 pCi/L, so green is roughly where you'd like to be. The EPA says the average outdoor level is about 0.4 pCi/L, so anything indoors will be a bit higher than that. Green means you're in reasonable shape - no immediate action needed, but periodic monitoring is always smart.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "Is Ecosense accurate?", "answer": "Ecosense monitors have generally performed well in comparative testing. They're not a precision laboratory instrument, and no consumer device is, but they give a reliable picture of your radon levels. The color coding system is particularly useful for homeowners who want a quick answer without interpreting exact pCi/L numbers. For tracking trends and general monitoring, Ecosense is a solid choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "Ecosense vs Airthings - which is more accurate?", "answer": "Both are legitimate consumer monitors that use different detection technologies. They've each performed reasonably well in third-party comparisons. RadonEye (pulsed ionization chamber) is generally considered the fastest-responding consumer monitor; Airthings and Ecosense are both competitive and reliable. The \"most accurate\" answer depends on the specific models compared and under what conditions. For most homeowners, any of these is far better than no monitoring at all.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "Does Ecosense work without Wi-Fi?", "answer": "The standard EcoQube uses Bluetooth, not Wi-Fi, so it doesn't require Wi-Fi to operate. The device runs and logs data on its own; you just need to be in Bluetooth range to sync with the app. No home Wi-Fi network required.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "Can I use Ecosense in a house without a smartphone?", "answer": "The device itself will run and display readings on its color-coded indicator without a phone. The app adds historical data and graphs, but you don't need a smartphone to get basic radon monitoring from an EcoQube. Even so, the app is where the more detailed and useful information lives, so if you have any access to a smartphone, it's worth setting up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense EcoQube - What It Is and How It Works", "question": "Does Ecosense store data when I'm not connected via Bluetooth?", "answer": "Yes, like most continuous monitors, the EcoQube logs data internally. When you reconnect via Bluetooth and open the app, it syncs the stored history. You don't need to maintain an active Bluetooth connection for the device to keep recording.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "My Ecosense jumped from 1.5 to 7.2 overnight - is it broken or is something wrong?", "answer": "It's probably not broken - radon levels can genuinely spike overnight. Nighttime brings lower ventilation, often a change in barometric pressure, and closed windows, all of which can push levels up. A single overnight spike to 7.2 with a previous baseline of 1.5 is worth watching but not necessarily cause for alarm. Let it run for another 24 to 48 hours and look at the rolling average. If the average settles back down closer to 1.5, it was likely a weather-driven fluctuation. If the average is consistently elevated, that's a different story.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "My coworker's Ecosense reads 5.5 at their house - what should I tell them?", "answer": "Tell them it's a level the EPA recommends fixing. 5.5 pCi/L is above the 4.0 pCi/L action threshold, and while it doesn't cause any immediate symptoms, the long-term cancer risk from sustained exposure at that level is real. A mitigation system can usually bring it down significantly. Tell them to let the monitor run a few more days to confirm the average, then call a licensed mitigator for an assessment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "My Ecosense has been reading around 3.0 for two weeks - is that something I should fix?", "answer": "The EPA says levels between 2.0 and 4.0 pCi/L are worth considering mitigation - the risk is lower than above 4.0, but it's not zero. At 3.0 sustained for two weeks, you have a solid reading that's below the action level but in the yellow zone. Whether to mitigate is ultimately your decision, but it's a reasonable time to at least call someone and ask. Mitigation at that level is often straightforward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "I got a red light on my Ecosense - how long does it take to go back to green?", "answer": "If the level drops, the color will shift back toward yellow or green as the rolling average comes down. Opening windows and ventilating will speed that up. But if you're trying to get it back to green by ventilating, you're masking the problem rather than solving it. The real question is what your closed-house baseline level is. If the house naturally sits in the red without extra ventilation, that's what you should fix with a mitigation system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "My Ecosense is reading 0.5 - is it working correctly?", "answer": "0.5 pCi/L is a very low reading - essentially near outdoor air levels. If you're placing the device in a well-ventilated upstairs area or a newer tightly-constructed home with low radon, that reading is plausible and may be completely accurate. If you're suspicious it might be malfunctioning, run a charcoal canister test in the same location for a few days and compare.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "How does Ecosense handle radon fluctuations - does it show every spike?", "answer": "Ecosense shows a rolling average that smooths out short-term spikes. The display and app reflect averages over time rather than instantaneous counts. This is by design - a single spike of alpha particles doesn't tell you much, but the average over 24 hours tells you a lot. The history graph in the app will show you peaks and troughs so you can see the pattern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "Is the Ecosense EcoQube better than a charcoal canister test?", "answer": "They answer different questions. A charcoal canister gives you a lab-verified snapshot of a specific time window, with a chain of custody and official result. An EcoQube gives you continuous, ongoing monitoring with visual feedback and trends over time. For a one-time real estate test or formal assessment, the charcoal canister process (or professional monitor test) is typically required. For ongoing home monitoring, the EcoQube's continuous data is more valuable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "Can Ecosense be used outside?", "answer": "It's designed for indoor use in residential conditions. Outdoor radon levels are much lower (around 0.4 pCi/L on average) and weather exposure would damage the device over time. Stick to indoor use in conditioned or semi-conditioned spaces.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "My Ecosense is showing yellow - should I be worried?", "answer": "Yellow means your level is in the moderate range - typically between 2.0 and 4.0 pCi/L. It's not a red alert, but it's not something to ignore either. The EPA says that range is worth considering mitigation. Let the device run for a few days to confirm the average, and if it stays consistently in the yellow, at least have a conversation with a mitigator about your options.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "How often does Ecosense update its displayed reading?", "answer": "Ecosense updates its readings on a set interval as it accumulates alpha particle counts. Early on, updates may seem slow or jumpy because there isn't enough data yet. As time goes on and the running average stabilizes, the display becomes more consistent. The app typically shows you readings over time as well, so you can track how the average has been moving.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "My Ecosense app isn't showing historical data - is something wrong?", "answer": "If the app just lost its history, first check whether the device is still recording - make sure it's been running. If you reinstalled the app or got a new phone, the history stored in the device should still sync when you reconnect. If data is genuinely missing from a period when the device was running, it may be a sync issue. Try reconnecting and letting the app fully sync before assuming data is lost.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "Is Ecosense a good choice for someone who isn't tech-savvy?", "answer": "The color-coded system is one of its strongest features for non-tech users - you don't need to know what 3.7 pCi/L means if the display tells you green, yellow, or red. The app is straightforward once set up. For someone who wants clear visual feedback without having to interpret numbers, Ecosense is probably the most approachable consumer monitor on the market.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "Can I move my Ecosense to different rooms to check levels throughout the house?", "answer": "Yes. It's useful to move it around and compare levels in different areas - basement, main floor, bedrooms. Just give it at least 24 hours in each new location before reading the average, since it takes time to stabilize. A room-by-room survey gives you a useful map of where radon is highest in your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Ecosense Readings, Accuracy, and Real-Life Scenarios", "question": "My Ecosense reads higher in winter than summer - is that normal?", "answer": "Yes, very normal. Winter means closed windows, less ventilation, and often changes in the pressure differential between indoors and outdoors that draw more radon up from the soil. Your winter reading is typically your real baseline - the one you want to use for making decisions about mitigation. Summer readings with open windows can be artificially low.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "What is the SafetySiren Pro radon detector?", "answer": "SafetySiren Pro is a plug-in radon detector made by Family Safety Products. It's a simple, no-frills device - plug it into a wall outlet, and it continuously monitors radon levels and sounds an alarm if levels get too high. There's no app, no Bluetooth, no Wi-Fi - it's straightforward monitoring designed for people who want to know if there's a problem without managing a smartphone setup. It's been around for a long time and has a solid track record for what it does.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "Is there a Pro3 and a Pro4 SafetySiren?", "answer": "Yes, SafetySiren has iterated through versions over the years. The Pro3 was a widely used model; newer versions have followed. The core concept stays the same - plug-in, continuous monitoring, audible alarm, simple display. If you're buying new, check current availability for the latest model.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "SafetySiren doesn't have an app - is that a problem?", "answer": "For some people, no. Not everyone wants to manage yet another app or deal with Bluetooth pairing. SafetySiren's strength is simplicity - it's on, it's monitoring, and it beeps if there's a problem. For a person who wants basic radon protection without any tech overhead, that's actually an advantage. The tradeoff is that you don't get historical data, trending, or remote notifications. It's a smoke alarm model applied to radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "SafetySiren is plug-in - what happens if the power goes out?", "answer": "If the power goes out, the SafetySiren stops working. It doesn't have a battery backup. This is one of its main limitations compared to battery-powered monitors. A power outage is unlikely to create a radon problem by itself, but if you're in an area with frequent outages, you'd have monitoring gaps. For most homeowners, this isn't a significant concern, but it's worth knowing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "When does the SafetySiren alarm go off?", "answer": "The SafetySiren sounds an alarm when the radon level exceeds a certain threshold - generally in the range that aligns with EPA action guidance, though the exact trigger isn't specified by me here. The alarm is meant to prompt you to take action, not to indicate an immediate health emergency. When it goes off, note the reading, ventilate the area, and call a mitigator.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "Who is SafetySiren best for?", "answer": "SafetySiren is best for homeowners who want simple, reliable, set-it-and-forget-it radon monitoring without dealing with apps, Bluetooth, or tech setup. It's particularly popular with older homeowners or anyone who doesn't want to manage a smartphone component. A grandparent in a home with a basement is a classic use case. The simplicity is the feature.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "SafetySiren vs Airthings - which should I get?", "answer": "They serve different kinds of users. Airthings gives you an app, historical data, trends over time, and sometimes air quality sensors. SafetySiren gives you plug-and-play simplicity and an audible alarm - no phone required. If you're comfortable with apps and want detailed data, Airthings makes sense. If you want something simple that just monitors and alerts, SafetySiren is a better fit. Neither is wrong - it depends on how you want to interact with the data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "My grandfather has a SafetySiren that keeps beeping - what does that mean?", "answer": "If it's beeping repeatedly, the device has detected a radon level above its alarm threshold. First, note the number on the display. Open windows to ventilate the space and get the immediate level down. Then call a licensed mitigator to assess the home. Don't ignore it or just unplug the device - the beeping means the radon level is at a point where the EPA recommends action. This is a solvable problem, but it needs a real fix, not just silencing the alarm.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "How do I read the SafetySiren display?", "answer": "The SafetySiren display shows the current radon reading in pCi/L. It also typically shows short-term and long-term averages so you can see both current conditions and the trend over time. The short-term reading reflects recent hours; the long-term reading is built from weeks and months of data. The long-term average is the most meaningful number for assessing your home's real radon situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "How do I reset a SafetySiren?", "answer": "There's typically a reset button on the device. Consult the manual for your specific model. Resetting may clear the short-term or long-term averages depending on the type of reset. Note that resetting doesn't fix a radon problem - if the device alarmed, the radon level was real. After a reset, the device will begin rebuilding its averages from scratch.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "Can I use SafetySiren in a basement without Wi-Fi?", "answer": "Yes - SafetySiren doesn't use Wi-Fi at all. It just needs a standard wall outlet. No internet connection, no app, no Bluetooth. Plug it in and it works. This is actually one of its advantages for basement use where Wi-Fi signal might be weak.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "My SafetySiren is giving different readings at different times of day - is that normal?", "answer": "Yes. Radon levels fluctuate naturally throughout the day and with weather changes. Overnight and early morning often show higher readings because the house is closed up and pressure dynamics shift. The short-term reading will reflect these fluctuations. The long-term average is the number that matters most - it smooths out the natural variability and gives you a representative picture of your home's actual radon level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "How accurate is the SafetySiren Pro?", "answer": "SafetySiren uses a detection technology suited for continuous monitoring, but like all consumer devices, it has measurement uncertainty and is not a precision calibrated instrument. It gives a reasonable indication of your radon level over time. For the purpose it's designed for - ongoing home monitoring and alerting if levels are problematic - it's a reliable tool. If you need a precisely validated result for real estate or legal purposes, you need a certified professional test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "Does SafetySiren give a short-term and long-term reading?", "answer": "Yes. Most SafetySiren models display both a short-term average (updated frequently based on recent hours) and a long-term average (built over weeks and months of continuous operation). The long-term reading is the one most comparable to what a radon test is trying to measure - your home's sustained baseline. Pay attention to both, but give the long-term reading more weight when making decisions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "My SafetySiren just started alarming out of nowhere - could it be a false alarm?", "answer": "A sudden alarm after a period of normal readings could reflect a real spike triggered by a weather event, a change in ventilation, or something disturbing the soil under the foundation. It could also indicate a device malfunction, though that's less common. Check the reading number, open a window to ventilate, and let the reading come back down. If it continues to alarm repeatedly or the long-term average has crept up, treat it as a real signal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "How long has SafetySiren been around?", "answer": "SafetySiren has been on the market for many years - it's not a new product. It has a long track record and has been a staple recommendation for simple plug-in radon monitoring. Its longevity in the market is partly a function of its simplicity and reliability for basic use.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "Does SafetySiren alarm based on the short-term or long-term reading?", "answer": "The alarm is generally tied to the short-term reading exceeding a threshold - this allows it to alert you when conditions get dangerous rather than waiting for months of data to accumulate. This can mean the alarm fires during temporary spikes. When the alarm sounds, check both the short-term and long-term readings to understand whether it's a spike or a persistent elevation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "My SafetySiren is five years old - should I replace it?", "answer": "Five years is a reasonable milestone to consider replacement or at least cross-checking. Consumer radon monitors can drift over time. Running a charcoal canister test alongside it and comparing results is a good way to verify it's still accurate. If the two are significantly off, it's probably time for a new monitor. If they're reasonably close, the SafetySiren is likely still doing its job.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - What It Is and How It Works", "question": "SafetySiren alarm went off but I opened a window and now it's fine - is the problem solved?", "answer": "Opening a window ventilates the space and brings the short-term reading down, but it doesn't address why radon is entering the home in the first place. Once you close the windows again, levels will typically rise back up. It's the same problem as before, just temporarily diluted. If the alarm went off, the house has a radon issue that deserves a real fix - a mitigation system - rather than just managing it with ventilation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren Real-Life Scenarios and Comparisons", "question": "My mom's SafetySiren has been alarming every morning when she wakes up - what should I tell her?", "answer": "Morning alarms are common with radon monitors because radon levels peak overnight when the house is closed and pressure dynamics are unfavorable. But repeated morning alarms mean her long-term average is probably elevated too. Have her check the long-term reading on the display. If it's 4.0 pCi/L or above, she needs to call a mitigator. This isn't going away on its own - it needs a fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren Real-Life Scenarios and Comparisons", "question": "My neighbor has a SafetySiren and it never beeps - does that mean their radon is low?", "answer": "Probably, yes. If the SafetySiren has been running for a while and hasn't alarmed, it suggests their level hasn't exceeded the alarm threshold, which is generally aligned with the EPA action level. But \"never alarming\" isn't the same as a certified radon test. Their baseline may be below 4.0 pCi/L but still in the 2.0 to 4.0 range where mitigation is worth considering. The alarm threshold is a wake-up call, not an all-clear.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren Real-Life Scenarios and Comparisons", "question": "My SafetySiren reads 3.5 - is that okay?", "answer": "3.5 pCi/L puts you in the zone the EPA calls worth considering mitigation - below the 4.0 action threshold, but above 2.0 where the risk is low. At 3.5, the risk isn't zero. Whether you decide to mitigate at that level is your call, but it's a reasonable time to at least talk to a mitigator and understand your options. Many systems are straightforward to install and effective.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren Real-Life Scenarios and Comparisons", "question": "Can I put SafetySiren in a bedroom?", "answer": "You can, but the most useful placement is in the lowest livable level - typically the basement. Bedrooms on upper floors usually show much lower radon levels than the basement. If you have a bedroom in a basement or partially-below-grade area, that's worth monitoring. Placing it in an upstairs bedroom of a two-story house will probably show reassuringly low numbers that don't reflect what's happening in the basement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren Real-Life Scenarios and Comparisons", "question": "Is SafetySiren a good gift for elderly parents who live alone?", "answer": "It's genuinely one of the better options for that situation. No app to manage, no Bluetooth to set up, no Wi-Fi requirement - just plug it in and it monitors. If their radon gets dangerously high, it beeps loudly. For someone who doesn't want to manage technology, the simplicity is the whole point. Make sure they understand what the alarm means if it goes off.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren Real-Life Scenarios and Comparisons", "question": "My SafetySiren alarm keeps going off in my parents' basement and they keep unplugging it to make it stop beeping - what should I do?", "answer": "That's the wrong solution to the right signal. The device is telling them there's a real problem. Unplugging it doesn't fix the radon - it just removes the warning. Help them call a licensed mitigator for an assessment. The fix is typically a sub-slab depressurization system, and it works. Unplugging the monitor means they're living with elevated radon without knowing it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren Real-Life Scenarios and Comparisons", "question": "SafetySiren vs RadonEye - which is better?", "answer": "Better depends on what you need. RadonEye gives you a smartphone app, detailed historical data, faster response time, and is popular with more technically-minded users and inspectors. SafetySiren gives you plug-in simplicity, no tech required, and a loud alarm if something is wrong. If you want data and trends, RadonEye. If you want simple and reliable with no learning curve, SafetySiren. Both do the core job of detecting elevated radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren Real-Life Scenarios and Comparisons", "question": "My SafetySiren is showing a long-term average of 6.2 - what does that mean?", "answer": "At 6.2 pCi/L on the long-term average, your home has a significant radon problem that warrants mitigation. This isn't a borderline case - 6.2 is well above the EPA's 4.0 pCi/L action level. The long-term reading is built from weeks of data, so it's not a spike - it's reflecting your home's sustained baseline. Call a mitigator. This is a fixable problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren Real-Life Scenarios and Comparisons", "question": "Does SafetySiren have a light or is it just sound?", "answer": "SafetySiren primarily uses an audible alarm when levels are high. The display shows numerical readings for short-term and long-term averages. There may be an indicator light depending on the model, but the main alert mechanism is the alarm sound. Check the manual for your specific version for the full indicator rundown.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren Real-Life Scenarios and Comparisons", "question": "Can I use two SafetySirens in different parts of the house?", "answer": "Yes. If you want to monitor both a basement and a main floor, for example, two units work independently. Each one monitors and reports the radon level in its own location. Comparing the readings across two units gives you a useful picture of how radon distributes through the house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Cross-Brand Comparisons", "question": "RadonEye vs Ecosense - which should I choose?", "answer": "Both are solid consumer monitors. RadonEye's pulsed ionization chamber generally gives faster readings and has a strong reputation with professional users and inspectors. Ecosense's color-coded system is more intuitive for homeowners who don't want to interpret pCi/L numbers. If you want speed and data depth, RadonEye. If you want an easy-to-understand at-a-glance system, Ecosense. Either one is a meaningful step up from plug-in monitors without apps.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Cross-Brand Comparisons", "question": "I'm trying to decide between RadonEye, Ecosense, and SafetySiren - how do I choose?", "answer": "Think about how you want to interact with the data. SafetySiren is the simplest - plug it in, check the numbers occasionally, alarm if bad. Ecosense adds a color-coded app and is very approachable for non-technical users. RadonEye adds the fastest response time, detailed app data, and is popular with more data-oriented users and inspectors. For ongoing home monitoring, all three are reasonable choices; pick based on how much technology you want in the process.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Cross-Brand Comparisons", "question": "Do all three of these monitors - RadonEye, Ecosense, SafetySiren - use the same detection technology?", "answer": "No. RadonEye uses a pulsed ionization chamber. Ecosense uses a diffusion chamber with alpha particle detection. SafetySiren uses its own detection method (often a silicon photodiode-type sensor, depending on the model). These are all legitimate radon detection approaches but with different sensitivity characteristics and response speeds. The pulsed ionization chamber in RadonEye is generally considered the fastest-responding of the consumer options.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Cross-Brand Comparisons", "question": "Will any of these three give me results I can use for a real estate transaction?", "answer": "Generally, no - not on their own. Real estate radon tests typically require a licensed professional using certified equipment following specific protocols with chain of custody documentation. RadonEye, Ecosense, and SafetySiren are excellent for ongoing home monitoring, but they don't replace the formal testing process required for most real estate transactions. Check your state's specific requirements.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Cross-Brand Comparisons", "question": "Are RadonEye, Ecosense, and SafetySiren all EPA-approved?", "answer": "The EPA doesn't maintain a consumer device approval list the way it might for professional equipment protocols. These are all consumer products available through retail channels. What matters for any of these is whether they perform reliably and whether the testing methodology meets your state's requirements if you're using them for a formal purpose. For personal home monitoring, \"EPA approved\" isn't the relevant standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Cross-Brand Comparisons", "question": "Which of these monitors is most popular with home inspectors?", "answer": "RadonEye has the largest following among home inspectors, primarily because of its fast response time, which is valuable when you're at a property for a limited window. Some inspectors also use Ecosense. SafetySiren is less common among inspectors since it lacks the data export and app connectivity that inspection reports typically require.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Cross-Brand Comparisons", "question": "What's the cheapest of the three - RadonEye, Ecosense, or SafetySiren?", "answer": "SafetySiren is typically the most affordable entry point. Ecosense falls in the mid-range. RadonEye is usually priced higher, reflecting its technology and app ecosystem. Even so, pricing changes and all three are available through consumer retailers. If budget is the main driver, SafetySiren gives you basic reliable monitoring at the lowest price point. For more features, expect to pay more for the other two.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Cross-Brand Comparisons", "question": "I want to monitor radon in a rental property I own - which of these is best?", "answer": "For a rental property you're not always physically present at, the RadonEye Plus (Wi-Fi) or another Wi-Fi-connected monitor would be most useful since you can check readings remotely. Standard Bluetooth models require you to be within range. SafetySiren would work in a property where a tenant can check the display and call you if it alarms. Think about whether you need remote access before deciding.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Cross-Brand Comparisons", "question": "My real estate agent listed \"radon monitor\" in the house description - I found it was a SafetySiren. Does that count as radon testing?", "answer": "A SafetySiren sitting in a basement is not a radon test - it's a consumer monitor. A radon test requires specific protocols, documentation, and typically a certified tester. The presence of a monitor in the home tells you the previous occupants were aware of radon, not that the home has been formally tested. If radon status matters for your purchase, insist on a certified professional test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Cross-Brand Comparisons", "question": "I have a RadonEye in my basement and a SafetySiren in my first floor office - they're showing different numbers. Which should I trust?", "answer": "Both readings are probably accurate for their respective locations. Radon is typically highest in the lowest level, so the basement RadonEye reading is more important for assessing the home's radon risk. The first-floor office will naturally show lower levels because radon dilutes as it moves up through the building. Use the basement reading as your primary decision-making number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Cross-Brand Comparisons", "question": "My Ecosense and my neighbor's RadonEye show pretty different numbers when we compared them outside - which is right?", "answer": "Outdoor radon levels are very low and can vary significantly in a small area depending on wind, temperature inversions, and soil conditions. Comparing two different devices outdoors where levels are at or near their detection floor isn't a great test of accuracy. Compare them both indoors in the same room for 24+ hours to get a meaningful comparison. Some variation between two different consumer devices is normal even in the same space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Cross-Brand Comparisons", "question": "Which of these monitors gives the most detailed historical data?", "answer": "RadonEye, through its app, generally provides the most detailed historical graph and data export capability. Ecosense's app also provides historical data with color context. SafetySiren shows only the short-term and long-term averages on its display with no app or export. If detailed historical records matter to you - for example, to share with a mitigator or track trends over months - RadonEye or Ecosense are the better choices.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "I just found out radon causes lung cancer - should I be getting headaches or feeling sick right now?", "answer": "No - radon does not cause acute symptoms. It doesn't give you headaches, sore throats, fatigue, or any feeling you can notice in the short term. Radon is a long-term lung-cancer risk from cumulative radiation exposure over years. There is no way to \"feel\" it. That's actually what makes it dangerous - it's invisible and symptomless. If you have health concerns about past exposure, that's a conversation for your doctor, not something a radon monitor can answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Do consumer radon monitors like these need to warm up before giving accurate readings?", "answer": "Yes - all three types need time to build statistically meaningful data. The first few hours are the least reliable. Give any consumer monitor at least 24 to 48 hours before taking the reading seriously. Some people see the first hour reading and make decisions based on it - that's not how these devices are meant to be used.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Can radon levels really change that much from day to day?", "answer": "Yes, significantly. Radon entry into homes is driven by pressure differentials between the soil and indoor air, which fluctuates with weather, wind, barometric pressure, and how open or closed the house is. Day-to-day swings of 50% or more are completely normal. This is why short-term averages matter more than individual readings, and why long-term monitoring is the most reliable way to understand your home's baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "How is radon getting into my house?", "answer": "Radon forms naturally in soil and rock when uranium decays. It seeps up through the soil and enters homes through cracks in foundations, slab penetrations, floor drains, sump pits, wall-floor joints, and any other gaps between the house and the soil. The negative pressure inside a home (relative to the soil) basically pulls radon in like a chimney pulling smoke. No home is completely sealed from this, but how much enters depends on your soil type, construction, and foundation integrity.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Is it possible for a house to have zero radon?", "answer": "Effectively no - all homes have some radon. The question is how much. Even very well-built homes in low-radon areas typically show some small amount. The national average indoor radon level in the US is about 1.3 pCi/L. What you're trying to determine is whether your specific home's level is high enough to warrant action.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "If I get a mitigation system, do I still need a radon monitor?", "answer": "Yes - mitigation systems are mechanical devices and they can fail. A fan can stop working, a pipe can get blocked, or a seal can fail. Keeping a monitor running after mitigation lets you verify the system is working and catch any problems early. Think of it the same way you'd keep a smoke alarm even after installing a sprinkler system. Post-mitigation monitoring is just good practice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Can radon come through a concrete basement floor?", "answer": "Yes. Concrete is porous, and radon seeps through it. Radon also enters through cracks, control joints, and any penetrations through the slab. A solid concrete floor reduces but doesn't eliminate radon entry. Mitigation systems work by creating negative pressure under the slab, which draws radon out before it can enter the living space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Should I test with a continuous monitor like RadonEye or a charcoal test kit - which is better?", "answer": "They serve different purposes. A charcoal canister gives you a single lab-verified result for a specific time window - it's what's typically used for real estate and formal testing. A continuous monitor gives you ongoing data and trends over weeks and months. For understanding your home long-term, continuous monitoring is more valuable. For a formal documented result, the charcoal canister process is often required. Many people do both - a charcoal test to establish a baseline and a continuous monitor to watch things over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Does having a mitigation system already installed mean I don't need to monitor?", "answer": "No. A working mitigation system keeps radon low, but it needs to actually be working for that to be true. Fans fail, pipes get blocked, and conditions change. Keeping a monitor running after mitigation tells you whether the system is still doing its job. If your monitor starts trending up after a period of low readings, it's a signal the system needs attention.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Can I move my radon monitor between rooms and get meaningful comparisons?", "answer": "Yes, but give it at least 24 hours in each location before drawing conclusions. If you move it from the basement to the first floor and check it an hour later, the reading reflects the transition, not the stable level of that room. Mark the time when you move it and look at the average after a full day.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My house was built in the 1960s - is it more likely to have radon than a newer house?", "answer": "Older construction often has more foundation cracks, gaps, and unsealed penetrations that radon can enter through. Newer homes built with radon-resistant construction (RRNC) have features that reduce entry - plastic sheeting, sealed floors, passive venting pipes. But radon level depends heavily on the soil under the specific house, so a new home can have high radon and an old home can have low radon. The only way to know is to test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Does weather affect my radon monitor reading?", "answer": "Yes, significantly. Low barometric pressure - like before a storm - tends to pull more radon up from the soil and into the house, causing readings to rise. High pressure does the opposite. Wind can reduce the pressure differential that drives radon in. Your monitor's readings will follow these patterns, which is why you need several days of data to get a meaningful average.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "I tested in summer and got a low reading - should I test again in winter?", "answer": "Yes, that's smart. Summer testing with open windows can underestimate your home's real radon level because ventilation dilutes the reading. Winter is when most homes have elevated radon because windows are closed and the house is under greater negative pressure. If your summer test came back low but you're in a high-risk area, a winter test gives you a more conservative, realistic picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Do radon monitors affect my cell phone signal?", "answer": "No. Radon monitors don't emit radio frequency signals that would interfere with your cell phone. The Bluetooth connection on app-connected monitors operates in the 2.4 GHz range and is extremely low power. There's no meaningful interference between a radon monitor and household electronics.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My friend says radon monitors are just a gimmick to sell you mitigation - is that true?", "answer": "Radon monitoring is legitimate science. Radon is the second-leading cause of lung cancer in the US after smoking, according to the EPA, and it's been studied extensively. The devices exist because there's a real, documented health risk that the monitors help detect. Having a monitor in your home gives you actual data about a genuine hazard. That's not a gimmick - that's the same logic as a smoke detector or a carbon monoxide detector.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Is it possible to have radon in a house on a slab with no basement?", "answer": "Yes. Slab-on-grade homes can have radon too - it enters through cracks in the slab, control joints, and penetrations. The level may or may not be as high as in a home with a basement, but it's not a given that slabs are safe. Testing is the only way to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "If I put a radon monitor in my car in the garage, will it detect radon?", "answer": "Garages can have some radon, but a car is not the typical testing environment. More importantly, garages often have ventilation that wouldn't reflect what's in your living space. If you're concerned about garage radon and its potential to enter the house, the more useful test is inside the living space adjacent to the garage, not in the garage itself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Do any of these monitors - RadonEye, Ecosense, SafetySiren - also measure other air quality factors?", "answer": "Some newer smart home monitors bundle radon with other sensors (CO2, VOCs, humidity, etc.), but RadonEye, Ecosense's dedicated radon monitors, and SafetySiren are specifically designed for radon. They don't typically measure other air quality factors. If you want a combined air quality and radon monitor, there are other products in the market, but radon-only monitors are often more focused on the detection technology.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Should I trust a radon monitor I bought used?", "answer": "With some caution. A used monitor of unknown age and history may have drifted in calibration or been exposed to conditions that degraded the sensor. If you can verify how old it is and whether it's been in good condition, it may still be serviceable. Cross-check it against a fresh charcoal canister test before relying on it. If the numbers are way off, don't trust it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "What's the national average indoor radon level in the US?", "answer": "The EPA cites the national average indoor radon level at approximately 1.3 pCi/L. Outdoor air typically averages around 0.4 pCi/L. These are averages - your home could be far above or below depending on your location, soil, and construction. The averages are useful context, not a benchmark for your specific situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "A reading below 2.0 pCi/L - does that mean radon isn't a problem?", "answer": "It means the risk is on the lower end of the range. The EPA says below 2.0 pCi/L is not a level at which they recommend action, but they also acknowledge there's no completely risk-free level of radon. Below 2.0 is good news - it means you're below both the action threshold and the consideration range. Continue monitoring and retest if anything changes significantly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My Ecosense has been showing green for a year - is radon completely ruled out?", "answer": "A year of green readings is a very good sign, and the long-term average from sustained monitoring is meaningful data. Even so, conditions can change - a major renovation, changes to the foundation, or shifts in soil conditions can alter radon entry over time. Periodic retesting is always worthwhile, even if you've had consistently low readings. It's not a concern right now, but good practice is to verify every few years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "If I have high radon, will mitigation definitely fix it?", "answer": "Mitigation is highly effective in the vast majority of cases. Sub-slab depressurization, the most common system, typically reduces radon levels by a large margin - often bringing levels well below the 4.0 pCi/L action threshold. It's not a warranty to any specific number, but it's a proven, well-understood technology that works in the great majority of installations. If you want to talk through what to expect for your specific situation, reach out and we can walk through it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Can a radon monitor detect radon in my water? (General Questions About Consumer Radon Monitors)", "answer": "No. Household radon monitors measure radon in the air, not dissolved radon in water. Waterborne radon is a separate issue that requires water testing. If you have a private well and you're concerned about radon in your water, that's a separate test from air radon monitoring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Is there a radon level that's completely safe?", "answer": "No radon level is completely risk-free - radon is a carcinogen, and any level carries some risk. The EPA's guidance isn't that 4.0 pCi/L is \"safe\" and 3.9 is fine - it's that 4.0 is the threshold above which the risk is high enough to clearly warrant action. Below 2.0, the risk is lower but not zero. This is the same way we talk about many environmental risks - the goal is reducing exposure as much as practical, starting with the highest levels first.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Should I test for radon if my neighbor just mitigated their house?", "answer": "Your neighbor's mitigation doesn't affect your home's radon level - each house is independent. In fact, their mitigation might slightly shift the pressure dynamics under the shared soil, though effects are typically small. You should test your own home regardless of what your neighbors have done. Radon varies house by house based on foundation details, construction, and soil contact.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My realtor says the previous owners had a radon system installed - does that mean I don't need to test?", "answer": "No. You should still test. Mitigation systems can fail - fans stop working, pipe connections can shift, and systems that reduced radon to below 4.0 pCi/L when installed may not still be working properly years later. Before assuming the system is working, get a radon test (or put a continuous monitor in) to verify current levels. Buying a house with a mitigation system installed is a plus, but it doesn't replace verifying the system is actually working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "How do I know if my RadonEye, Ecosense, or SafetySiren is working properly?", "answer": "The most practical check is a cross-comparison with a charcoal canister test. Place a canister in the same area, run the monitor alongside it for the canister's required exposure time, and compare results. If they're in reasonable agreement, the monitor is likely performing correctly. If there's a large discrepancy, investigate further - placement differences, test conditions, or a malfunctioning device could all be factors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Is there a standard radon test that supersedes these monitors for peace of mind?", "answer": "A professional test using certified equipment, conducted by a licensed radon tester following proper protocols, gives you a validated, documented result. That's the gold standard for peace of mind and for real estate or legal purposes. Consumer monitors like RadonEye, Ecosense, and SafetySiren are excellent for ongoing monitoring but don't produce the chain-of-custody documentation that a professional test does. If you want to nail down a definitive number for a formal reason, a professional test is the right tool.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "I left my Ecosense running in a closed house for two weeks while on vacation - is that data useful?", "answer": "Very useful, actually. Two weeks of continuous monitoring in a closed house gives you an excellent picture of your home's radon baseline under real living conditions. Look at the average over that full period - that's about as reliable as home monitoring gets. If it stayed consistently green, great. If the average was elevated, you have meaningful data to act on.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Do I need a radon monitor if I just did a professional test and it came back below 2.0?", "answer": "A professional test below 2.0 is good news. You don't urgently need ongoing monitoring, but having a continuous monitor gives you the ability to track whether conditions change over time - renovations, seasonal shifts, or changes in foundation sealing can alter radon entry. It's not required, but it's the difference between a one-time photo and an ongoing video of your home's radon status.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My kids are asking me about radon since we got a monitor - what do I tell them?", "answer": "Tell them radon is a naturally occurring gas that comes up from the ground, and the monitor measures how much is in the house. It doesn't make anyone sick right away - it's a slow, long-term risk, like secondhand smoke. The monitor helps you make sure the level stays low. If it gets too high, there are people who can fix it. It's a reasonable thing to pay attention to, not something to be scared of.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Do these monitors work in a finished vs unfinished basement?", "answer": "Yes, in both. The detection technology works regardless of whether the space is finished or not. Finished basements are often more airtight, which can actually lead to higher radon accumulation. The placement considerations are the same - a few feet off the floor, away from heavy airflow sources, not directly against the exterior wall.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "What should I do if my radon monitor reads consistently above 8.0 pCi/L?", "answer": "At 8.0 pCi/L, mitigation is clearly warranted - that's twice the EPA action level. While there's no immediate emergency, you shouldn't sit on that reading. Contact a licensed mitigator and schedule an assessment. In the meantime, increase ventilation in the affected area when possible. Radon at that level from sustained exposure significantly increases lung cancer risk over time, and mitigation is a straightforward fix that works.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "I have a RadonEye in my basement and a SafetySiren on my first floor - the basement reads 5.8 and the first floor reads 1.3. Which matters more?", "answer": "The basement reading is the one that matters most for your overall radon situation. That's where radon is entering and accumulating, and 5.8 pCi/L warrants mitigation. The 1.3 on the first floor is lower because radon dilutes as it moves up and the house's general air exchange reduces concentration. Fix the source - the basement - and both levels will improve. Call or text us and we can talk through what makes sense for your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My builder says the new house I'm buying was built with radon-resistant construction - do I still need to test?", "answer": "Yes. Radon-resistant new construction (RRNC) includes features that reduce radon entry and make it easier to add a mitigation system if needed - things like a plastic vapor barrier, sealed foundation, and passive vent pipe. But RRNC features reduce radon entry, they don't eliminate it. Testing tells you whether those features are doing the job in your specific home. New doesn't mean no radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Is radon testing a one-time thing or should I test repeatedly over the years?", "answer": "Periodic testing is the smart approach. A one-time test tells you what conditions were like at that moment. Conditions change over time - homes settle, cracks develop, HVAC systems change, mitigation systems age. Retesting every two years is a common recommendation, and ongoing monitoring with a device like RadonEye, Ecosense, or SafetySiren gives you continuous awareness rather than a point-in-time snapshot.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "I've seen radon levels described as pCi/L and also WL (working levels) - are these different?", "answer": "pCi/L is the standard unit for homeowner radon testing in the US. WL (working levels) is an older unit that originated in occupational exposure settings like mines. The two units measure different but related things. For all practical home radon purposes, pCi/L is the unit you'll see and the one the EPA uses for its guidelines. You don't need to think about WL for home monitoring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "What's the fastest way to get a rough sense of my radon level if I don't have a monitor?", "answer": "The fastest reliable option is a short-term charcoal canister test - expose it for the required time (typically 48 to 96 hours under closed-house conditions), mail it to the lab, and you'll get results in a week or so. If you want ongoing awareness rather than a single result, a continuous monitor like RadonEye or Ecosense gives you data in 24 to 48 hours that's meaningful even if not lab-certified. For any formal purpose, the certified test is the right answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Do any of these monitors tell you whether you need mitigation, or do you have to figure that out yourself?", "answer": "They give you the number - the interpretation is on you or on a professional. The EPA's framework is pretty clear: above 4.0 pCi/L, fix it; between 2.0 and 4.0, consider it. A monitor at 6.0 doesn't tell you \"get mitigation\" in so many words, but that's what the reading means. If you're not sure how to interpret your reading, reach out - we're happy to help make sense of what the numbers mean for your specific situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Are there any radon monitors I should avoid?", "answer": "The main thing to avoid is very cheap, uncredited devices with no technical documentation or manufacturer support. There are knockoff products on marketplaces that claim to detect radon but have no validated detection methodology. Stick with established brands like RadonEye, Ecosense, Airthings, and SafetySiren, which have at least some track record and technical backing. A device that can't accurately detect radon is worse than no device - it gives you false confidence.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Can I run two different radon monitors simultaneously in the same room as a check?", "answer": "Yes, that's a smart way to cross-check. Place both devices in similar positions in the same room and compare their averages after 48 to 72 hours. They don't need to agree perfectly - some variation between different detection technologies is normal - but they should be in the same general range. A large discrepancy suggests one device may be malfunctioning or significantly out of calibration.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My husband thinks our RadonEye is making us paranoid - is monitoring worth it?", "answer": "Knowing is better than not knowing. Radon is the second-leading cause of lung cancer in the US after smoking, and it's invisible and symptomless. A monitor gives you data so you can make an informed decision rather than guessing. If the reading stays low, great - you have peace of mind. If it's high, you can fix it before years of cumulative exposure add up. That's not paranoia; that's a reasonable precaution for something that causes tens of thousands of deaths a year in the US.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "I'm pregnant - should I be more worried about radon? (General Questions About Consumer Radon Monitors)", "answer": "Radon is a long-term lung-cancer risk from cumulative radiation exposure. The concern is the same for everyone - it's about years of exposure, not a single event during pregnancy. Even so, if you're in a high-radon home, addressing it is worthwhile regardless of your life circumstances. Radon's effects on unborn children aren't the primary documented concern - lung cancer risk from chronic alpha particle exposure is. For any specific health questions related to your pregnancy, talk to your doctor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Can I run RadonEye on USB power instead of batteries?", "answer": "Some users power the RadonEye via a USB adapter rather than relying on batteries alone. The device typically accepts USB power, which can be handy if you want it running long-term in a fixed location without swapping batteries. Check the product packaging for the input specs of your specific model. For permanent placement in a basement monitoring setup, USB power is a practical option.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My RadonEye was in the house during a renovation - should I trust the readings from that period?", "answer": "Probably not for that specific period. Renovation work stirs up dust, creates air movement, changes pressure dynamics, and sometimes disturbs soil around the foundation. Readings during and immediately after renovation can be artificially elevated or inconsistent. Let the house settle for a week or so after work is complete, then start fresh with several days of monitoring before drawing conclusions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Can I leave RadonEye in a vacation home or cabin for months at a time?", "answer": "Yes, it's designed for continuous long-term operation. If the cabin has power and you have the Wi-Fi version, you can check readings remotely. With the Bluetooth version, the data will be there waiting for you when you return and open the app in range. Long-term data from a vacation property is actually very useful - you'll see the baseline over seasons and different occupancy patterns.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "I see people on Reddit posting their RadonEye readings - is social comparison useful?", "answer": "It can be interesting context, but your neighbor's reading (or a stranger's on the internet) doesn't tell you anything meaningful about your home. Radon is hyper-local - driven by your specific soil, foundation, and construction. Someone in the same zip code posting a low reading doesn't reduce your risk if your house has a different foundation situation. The only number that matters is yours.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My RadonEye reading is stable at 1.1 pCi/L - do I need to do anything?", "answer": "1.1 pCi/L is a very low reading, near the national average and well below either of the EPA's consideration thresholds. No action needed. Keep the monitor running so you have ongoing awareness - that's the best you can do. If you ever make significant changes to the house (adding HVAC, sealing the basement, major renovation), recheck to make sure nothing shifted the baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Does RadonEye have a mute function for the alarm?", "answer": "The app typically lets you adjust alarm settings, including silencing or adjusting the audible alarm threshold. Check the app settings under alarm or notification configuration. Note that muting the alarm doesn't fix the underlying radon issue - if it's beeping, the level is genuinely elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "What's the best height to place RadonEye at in my basement?", "answer": "A few feet off the floor - roughly at breathing height - is the standard recommendation. The goal is to measure the air you'd actually breathe in that space, not air right at the slab where radon is densest as it seeps in. A table, shelf, or countertop at roughly waist to chest height is ideal. Keep it away from windows, HVAC registers, and high-traffic paths where air movement is high.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Can RadonEye pick up radon from a nearby gas fireplace?", "answer": "Gas appliances don't produce radon - radon comes from soil and rock. A gas fireplace or furnace won't affect your radon reading. Even so, gas combustion appliances can create pressure dynamics that affect how the house breathes, which could indirectly influence radon entry. The combustion itself isn't a radon source.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My RadonEye reading was 4.5 before a major rainstorm and dropped to 2.1 after - is that real?", "answer": "It's real. Rainfall increases soil moisture, which can temporarily reduce radon entry by capping the soil pores that allow radon to migrate. It's a well-documented phenomenon. It's also why testing after a rain event may underestimate your baseline. For the most representative reading, look at the average over a week or more that includes varied weather.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Does RadonEye have any kind of self-test feature?", "answer": "Most consumer monitors don't have a formal self-test mode the way a smoke detector does. The best verification is a cross-check against a charcoal canister test. The device continuously logs data, and if there were a sensor failure, you'd typically see an anomalous reading (stuck at zero, erratically high) rather than a silent failure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Can RadonEye detect other gases besides radon?", "answer": "No. It's specifically designed to detect alpha particles from radon and its progeny. It won't detect carbon monoxide, VOCs, or other gases. It's a radon-specific instrument.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Does EcoQube work in very cold basements?", "answer": "EcoQube is designed for typical residential conditions. Extremely cold temperatures - like an unheated basement in winter that drops to near freezing - could affect sensor performance. Check the operating temperature range in the product specs. For a basement that drops very cold, it may be worth moving the monitor to a slightly warmer spot or choosing a monitor rated for that range.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My Ecosense app lost all my history after I got a new phone - can I recover it?", "answer": "If the history was stored only in the app on the old phone and not synced to cloud storage, recovery may be difficult. Some versions of the app store history on the device itself, which can be synced to the new phone when you reconnect. Try reconnecting via Bluetooth on the new phone and see if it pulls the device's stored history. Contact Ecosense support if you can't recover it - they may have options depending on the app version.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Is Ecosense good for monitoring a rental basement apartment?", "answer": "Yes. The color-coded display is particularly useful for tenants who want a simple way to know if their space has a radon issue. Green means no concern, red means call the landlord and a mitigator. The Ecosense's approachable interface makes it easy for anyone to use, regardless of technical background.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "I put my Ecosense directly on the floor - does that matter?", "answer": "Placement directly on the floor tends to read higher than breathing height because radon concentration is somewhat elevated near the slab where it's entering. A few feet off the floor gives you a more representative reading of what you'd actually be breathing in the space. It's worth moving it up onto a shelf or table if it's been on the floor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My Ecosense has been running for a month and the long-term average is 3.7 - should I tell my wife she needs to worry?", "answer": "At 3.7 pCi/L over a month, you're right at the edge of the EPA's consideration range (2.0-4.0) and just below the action level of 4.0. It's not an emergency, but it's a reading worth acting on. The risk at 3.7 isn't zero, and it's the kind of level where a straightforward mitigation system would bring real peace of mind. Have the conversation not from a place of alarm but from a practical standpoint - this is fixable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Does Ecosense recommend replacement after a certain number of years?", "answer": "Like other consumer monitors, Ecosense monitors can drift over time. Checking the Ecosense website for manufacturer guidance on lifespan is the right step. In general, cross-checking against a charcoal test every few years is a good practice regardless of what the manufacturer states. If your Ecosense is several years old and has never been cross-checked, now is a good time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Can I put Ecosense in my baby's nursery?", "answer": "You can, but keep in mind that radon levels are highest in the lowest level of the home. A nursery on the main floor or above will typically show much lower readings than the basement. If the nursery is in a finished basement or partially below-grade room, monitoring there makes sense. If you have any concern about radon in the home generally, start by testing the lowest level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "My Ecosense showed red for two days, then went back to green - do I still need to do something?", "answer": "Two days of red readings suggests elevated radon, even if it came back down. It's worth looking at what the reading actually was during those two days and what the long-term average looks like. Natural fluctuations can cause temporary spikes, but sustained red for 48 hours means the actual average during that period was significantly elevated. If your overall long-term average is 2.0 or below, a brief weather-driven spike may not require action. If the long-term average has crept up toward 4.0 or above, it does.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Is the EcoQube Flex significantly better than the original EcoQube?", "answer": "The Flex is designed for more flexible placement options and represents a newer iteration. The core detection approach is similar. Whether it's meaningfully \"better\" depends on what features matter to you - form factor, placement flexibility, battery versus plug-in. For pure radon detection performance, both use solid technology. Check current models and reviews when buying new, since product lines evolve.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "General Questions About Consumer Radon Monitors", "question": "Does Ecosense have any community features or can I compare my readings with neighbors?", "answer": "The Ecosense app focuses on your own home's data rather than social comparison features. There are no built-in neighbor comparison tools. Some third-party sites aggregate radon data by geography, which can give you a sense of regional risk, but your home's specific reading is the only number that guides your decision-making.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - Advanced Questions", "question": "Can SafetySiren be plugged in through a surge protector?", "answer": "Yes, using a surge protector is fine and actually protects the device from voltage spikes. The main concern is that if the power goes out or the surge protector's breaker trips, the SafetySiren goes offline. Make sure the outlet and protector are on a circuit that stays powered and isn't accidentally switched off.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - Advanced Questions", "question": "My SafetySiren's display is hard to read - is there a way to make it easier?", "answer": "The LCD display on SafetySiren is small and may be challenging in dim conditions. Positioning it where ambient light hits it well helps. You can also hold a flashlight to it temporarily to check the reading. It doesn't have a backlight on most models. If readability is a consistent issue, an app-connected monitor like RadonEye or Ecosense would give you the data on your phone screen instead.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - Advanced Questions", "question": "Can SafetySiren detect radon through thick concrete?", "answer": "The SafetySiren senses radon that's already in the air around it - it doesn't \"see through\" concrete. Radon that has entered the air space of the basement is what it's measuring. The concrete itself isn't a barrier to the sensor; it's just that radon needs to have already entered the air before the sensor can detect it. This is the same for all consumer monitors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - Advanced Questions", "question": "Is SafetySiren UL listed or tested to any standard?", "answer": "SafetySiren has been marketed as tested to applicable standards, but I'd encourage you to check the current product documentation directly for certification details. Consumer electronics standards and certifications do evolve. The device has a long track record on the market, which is some evidence of reliability, but specific certification claims should be verified with the manufacturer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - Advanced Questions", "question": "Does SafetySiren have an end-of-life indicator?", "answer": "Some models have an indicator that tells you when the device is reaching the end of its useful sensor life. Check the manual for your specific version. If the device is several years old and you're unsure of its status, a cross-check against a charcoal canister test will tell you if it's still reading accurately.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - Advanced Questions", "question": "SafetySiren vs RadonEye for a non-tech-savvy elderly parent - which is easier?", "answer": "SafetySiren, without question. No app to download, no Bluetooth to configure, no smartphone needed. Plug it in and it works. If the number is high or it beeps, they call you or a mitigator. For someone who doesn't want technology in the process, SafetySiren's simplicity is its greatest strength. RadonEye's app is excellent but it adds a layer of setup and ongoing management that isn't right for everyone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - Advanced Questions", "question": "My SafetySiren is in a partially finished basement - does it matter whether I put it in the finished or unfinished part?", "answer": "Put it where people spend time. If the finished part is the living space and the unfinished part is a utility area no one uses, the finished section gives you more relevant data for your actual exposure. Even so, if the unfinished section has exposed soil or a sump pit, it may show higher readings. Monitoring both areas gives you the best picture, but if you have one device, put it where the family actually spends time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - Advanced Questions", "question": "Does SafetySiren read differently on days when the HVAC runs a lot?", "answer": "HVAC operation affects air circulation, which affects how radon concentrations distribute through the space. When the HVAC is moving air, radon gets diluted more; when it's off for extended periods (overnight, weekends), levels can creep up. The short-term reading will reflect these patterns. The long-term average accounts for these fluctuations over time and gives you the more representative picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - Advanced Questions", "question": "My SafetySiren is near a window that I open in summer - will that affect the reading?", "answer": "Yes. Open windows bring in low-radon outdoor air and dilute the basement air, lowering the reading. When the window is closed, levels will rise toward the real baseline. For the most accurate sense of your home's radon level, run the monitor under typical living conditions - meaning the way you actually live, with windows as you'd normally have them in each season.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "SafetySiren - Advanced Questions", "question": "I unplugged my SafetySiren to move it to a new spot - will it have to rebuild the long-term average from scratch?", "answer": "Yes. Most monitors lose or reset their long-term average when power is interrupted, since they can't continue sampling while unplugged. The device will begin building a new average from the moment it's powered back up in the new location. Give it several days in the new spot before relying on the long-term reading. The short-term reading will be available sooner.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "My monitor shows different readings in the morning versus evening - which one should I believe?", "answer": "Both are real - they reflect natural radon variation throughout the day. Morning readings are often higher because the house has been closed overnight. Evening readings may be lower if windows have been open. Neither reading is \"more true\" than the other - both are snapshots in a fluctuating system. Look at the rolling average over 24+ hours for the number that actually guides your decisions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "I've had my continuous monitor for three weeks and the average has been 4.8 - is three weeks enough to be confident?", "answer": "Three weeks is solid data. That's long enough for the average to reflect multiple weather cycles, different ventilation patterns, and seasonal conditions in your area. A consistent 4.8 pCi/L over three weeks is a reliable picture of your home's situation. At that level, the EPA recommends mitigation. Three weeks of data is more than enough to make that call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "My reading went way up the day workers jackhammered in my basement - is that reading meaningful?", "answer": "Not for assessing your normal radon baseline. Physical disturbance of the floor and soil dramatically increases radon entry temporarily. Readings during and after jackhammering should be discarded as anomalies. Let the dust settle - literally - and give the monitor several days after work is complete before drawing any conclusions about your home's actual baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "I have a finished basement with drywall - does that reduce radon levels?", "answer": "Finishing a basement with drywall, flooring, and paint can reduce radon entry slightly by creating additional barriers. But radon still finds paths through penetrations, outlets, and any unsealed gaps. Finished basements often actually trap radon more effectively than unfinished ones because they're more airtight. Don't assume a finished basement has lower radon - test and verify.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "What's the difference between a 48-hour average and a long-term average on a continuous monitor?", "answer": "A 48-hour average reflects the last two days of readings. It responds quickly to changes but is also more susceptible to short-term fluctuations from weather and ventilation patterns. A long-term average (built from weeks or months of data) smooths out those fluctuations and gives you a representative picture of what your home's radon level is across various conditions. Long-term is the number that matters most for health risk assessment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "Can a single bad measurement make a continuous monitor's average wrong?", "answer": "A very large spike can skew a short-term average, but the longer the monitor has been running, the less any single event affects the average. A monitor that's been running for a month has too much data for one spike to meaningfully shift the average. A monitor that's been running for 12 hours can be more heavily influenced by a spike. This is another reason why letting the device run longer before drawing conclusions is the right approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "My monitor shows a consistent reading right at 2.0 - is that the EPA's \"safe\" level?", "answer": "The EPA doesn't call 2.0 pCi/L safe. What the EPA says is that between 2.0 and 4.0 pCi/L, the risk is lower than above 4.0, and mitigation is worth considering. Below 2.0, the EPA doesn't recommend action. At exactly 2.0, you're at the lower boundary of the consideration range. It's not a crisis, but it's worth being aware of and monitoring over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "I'm comparing my monitor reading to state radon maps I found online - how useful are those?", "answer": "State and county radon zone maps give you a sense of regional risk based on geology, but they're drawn at a broad scale. They can't predict your individual home's level - a house in a \"low risk\" zone can have high radon and vice versa. Use the maps as background context, not as a substitute for actually testing your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "Does having a dehumidifier running in the basement affect radon readings?", "answer": "A dehumidifier moves air around, which can dilute radon concentrations somewhat and affect what the sensor is sampling. It won't eliminate radon, and its effect on the long-term average is usually minor since it runs on a duty cycle. Position the monitor away from the direct airflow of the dehumidifier so you're measuring the ambient air rather than the stream of air blowing past it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "Can a sump pump activity affect my radon reading?", "answer": "Yes. Sump pits are a common radon entry point - when water drains and air enters through the pit, radon can follow. Running sump pump cycles, especially in wet weather, can cause brief upticks in radon readings. Sealed sump pit covers significantly reduce this entry point and are often a component of a radon mitigation strategy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "My house has a radon mitigation system - my monitor reads 0.8 pCi/L. Is that as good as it gets?", "answer": "0.8 pCi/L with a working mitigation system is an excellent result. That's well below both EPA thresholds and close to typical outdoor air levels. The system is clearly doing its job. Keep the monitor running to catch any future system issues early, and have the system checked periodically to make sure the fan is still operating.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "What does it mean when my continuous monitor's average keeps slowly rising over weeks?", "answer": "A slow, sustained upward trend over weeks is worth paying attention to. It could mean a new crack or gap has developed in the foundation, HVAC conditions have changed, or natural seasonal shifts are increasing radon entry. If the average is approaching or exceeding 4.0 pCi/L, it's time to call a mitigator. If it's rising but still low, keep watching and note any changes to the house that might explain the trend.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Questions About Interpreting Readings Across All Brands", "question": "My monitor reading has been rock-steady at 3.1 for two months - is that unusual?", "answer": "Some stability is normal and expected once the monitor has run long enough for the average to be representative. Two months of steady 3.1 pCi/L is a reliable reading. That level is in the EPA's consideration range (2.0-4.0). Whether to act is your call, but the stability of the reading actually makes the decision easier - it's not a fluke, it's your baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "I just ordered a RadonEye - what should I do when it arrives to get the most useful data quickly?", "answer": "When it arrives, charge or install batteries, set it up in the lowest livable level of your home (basement for most people), and download the app. Place it a few feet off the floor on a shelf or table, away from windows and HVAC vents. Let it run continuously and check the app after 24 hours for an early reading. Don't make any decisions based on the first few hours - wait for at least 48 hours of data before drawing conclusions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "Is it worth paying more for the RadonEye Plus over the standard model?", "answer": "The Plus adds Wi-Fi, which lets you monitor remotely and log data without needing your phone in Bluetooth range. If you want to check a property you don't live at, want notifications when you're not home, or prefer cloud-stored data, the Plus is worth the extra cost. If you're monitoring your own home and you're there regularly, the standard Bluetooth model is perfectly adequate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "I'm buying a house - should I buy a consumer monitor or just get a professional test?", "answer": "For real estate purposes, a professional test is what you need. Consumer monitors don't produce the certified documentation that a real estate transaction requires. Even so, after you move in, having a continuous monitor in the home gives you ongoing awareness. Many homeowners do both - get a certified test at closing and then keep a continuous monitor running afterward for long-term peace of mind.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "I've never thought about radon before - which monitor should I start with?", "answer": "For a first-time monitor owner, Ecosense is very approachable because the color system removes the need to interpret pCi/L numbers. SafetySiren is even simpler if you prefer plug-and-forget. RadonEye is a good choice if you want more data and don't mind managing an app. All three are meaningful upgrades over having no monitoring at all. Start somewhere - the specific brand matters less than simply having awareness of what your home's radon level is.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0236", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "My wife just bought a RadonEye without telling me - is she being paranoid?", "answer": "She's being reasonable. Radon is the second-leading cause of lung cancer in the US after cigarette smoking - the EPA estimates it's responsible for about 21,000 lung cancer deaths per year. Having a monitor costs a fraction of what a mitigation system costs, and a fraction of what leaving a high-level problem undetected costs over time. The data either tells you everything is fine or tells you there's something to fix. Either way, knowing is better than not knowing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0237", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "How often do I need to check my radon monitor?", "answer": "You don't need to obsess over it daily. Once it's been running for 48 to 72 hours and the average is stable, checking weekly or even monthly is enough for most homeowners in a stable situation. If you make significant changes to the house - HVAC work, basement finishing, foundation repair - check more frequently around those events. Set an app notification threshold so the monitor alerts you if something changes significantly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0238", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "I live in a high-rise apartment on the 15th floor - should I bother with a radon monitor?", "answer": "Radon levels in high-rise apartments are typically very low - radon enters from the soil and dissipates rapidly in tall buildings. Testing an apartment on the 15th floor is unlikely to show elevated levels. If you live in a ground-floor or basement unit, it's worth testing. Otherwise, your monitoring effort is better directed elsewhere.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0239", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "My building is on a concrete slab with no basement - should I still test?", "answer": "Yes, slab-on-grade buildings can have radon. It enters through cracks and penetrations in the slab. The level may be lower than in a house with a basement, but it's not promised to be safe. Testing the first floor is worthwhile, especially if you're in a region with higher radon potential.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0240", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "I want to test my home before putting it on the market - which monitor should I use?", "answer": "For a formal pre-listing test that carries weight in the transaction, hire a certified professional rather than relying on a consumer monitor. For your own advance knowledge before listing, any of the consumer monitors will give you a useful sense of what a professional test might find. Knowing in advance gives you time to address a problem before it becomes a transaction complication.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0241", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "I've been in my house for 15 years and never tested for radon - is it too late?", "answer": "It's never too late to test. Whatever your level has been, knowing what it is now lets you make informed decisions going forward. If it's elevated, you can fix it and reduce future cumulative exposure. Fifteen years of potential exposure is what it is - you can't change the past, but you can change conditions going forward. Test now and act on what you find.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0242", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "My landlord says radon testing is unnecessary in my state - is that true?", "answer": "Your landlord may be referring to the fact that many states don't legally mandate radon testing. \"Unnecessary\" in a legal compliance sense is different from \"unnecessary\" in a health sense. Radon is a genuine health risk regardless of what your state requires. You're entitled to test your own living space, and if the reading is elevated, your landlord may have an obligation to address it depending on your state's tenant health and safety laws.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0243", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "The house I'm buying is in Pennsylvania - do I really need to worry about radon?", "answer": "Pennsylvania has some of the highest radon levels in the country - a large portion of the state sits in EPA Zone 1, which has the highest radon potential. Yes, absolutely test. Pennsylvania radon issues are common enough that you'd be unusual not to find elevated levels in many homes. Don't skip testing in Pennsylvania.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0244", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "The house I'm buying is in Florida - do I need to worry about radon?", "answer": "Florida tends to have lower radon levels than states in the northeast or Midwest, partly due to geology and partly due to construction style. But \"lower on average\" doesn't mean your specific home is low. Florida does have areas with elevated radon, particularly in the phosphate-rich central region. Testing is still worthwhile regardless of state.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0245", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "What do I do after my monitor shows a high reading - who do I call?", "answer": "Call a licensed radon mitigator. In most states, mitigation contractors are licensed through the state radon program or through national certification bodies. They'll assess your home, recommend a system, and install it. The process is usually straightforward - most residential mitigation is done in a day. If you want to talk through what you're seeing before calling a mitigator, fill out the form on the website or give us a call and we can help you understand what the reading means.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0246", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Buyer Questions and First-Time Monitor Setup", "question": "My reading went down after I sealed some cracks in my basement floor myself - did that help?", "answer": "It may have helped, and sealing cracks is a reasonable step. But crack sealing alone typically doesn't bring radon levels down enough to constitute a fix if the level was significantly elevated. Radon finds multiple paths of entry, and sealing visible cracks addresses only some of them. If your reading went from 6.0 to 5.5, the crack sealing helped but didn't solve the problem. A sub-slab depressurization system addresses all entry points by changing the pressure dynamic under the slab.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0247", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "After Mitigation - Monitoring and Verification", "question": "I just had a mitigation system installed - when should I retest with my monitor?", "answer": "Give it at least a week after installation before drawing conclusions. The system needs time to fully establish its pressure field under the slab. Check the monitor after the first week, then again at 30 days. You're looking for a sustained drop from where you started. Most properly installed systems bring levels down significantly within days, but letting the average settle for a month gives you the most reliable post-mitigation baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0248", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "After Mitigation - Monitoring and Verification", "question": "My mitigation system has been running for a month and my RadonEye still reads 3.2 - did the system work?", "answer": "If you started at 8.0 and you're now at 3.2, the system worked - that's a meaningful reduction. If you started at 2.8 and you're now at 3.2, something may need adjustment. Post-mitigation targets vary by what the pre-mitigation level was, but most people expect levels to drop below 2.0 pCi/L with a properly designed system. If you're not satisfied with the result after 30 days, contact the installer - they should diagnose and adjust the system if needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0249", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "After Mitigation - Monitoring and Verification", "question": "My RadonEye alarm went off six months after my mitigation system was installed - what happened?", "answer": "The most likely explanation is that the mitigation system fan has failed or the system has developed a leak. A working mitigation system should keep levels low consistently. A sudden alarm after months of low readings is a clear signal to check the system - look for the indicator u-tube on the system pipe, which will show whether suction is present. If the fan has stopped, it needs to be serviced or replaced.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0250", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "After Mitigation - Monitoring and Verification", "question": "How will I know if my mitigation system stops working?", "answer": "A continuous monitor like RadonEye, Ecosense, or SafetySiren is your early warning system for exactly this scenario. If the fan fails or a pipe seal fails, radon will start rising and your monitor will show it - first in the short-term average, then in the long-term. Some mitigation systems also have visual diagnostic indicators on the pipe. Keeping a monitor running after mitigation is the most reliable way to catch system failures early.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0251", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "After Mitigation - Monitoring and Verification", "question": "My post-mitigation reading is 0.6 pCi/L - is that as good as it gets?", "answer": "0.6 pCi/L is an excellent result - that's at or near outdoor air levels. A well-designed and working mitigation system can reduce radon to near-outdoor levels in many homes. That's the best possible outcome. Keep the monitor running to make sure that level holds over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0252", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "After Mitigation - Monitoring and Verification", "question": "Do I need to get my mitigation system professionally inspected, or is the monitor enough?", "answer": "The monitor tells you whether the system is working by watching the radon level. But a periodic professional inspection of the system itself - fan operation, suction pressure, pipe integrity - catches issues before they become complete failures. Think of the monitor as your first line of awareness and the professional inspection as confirming the mechanical health of the system. Annually or every few years is a reasonable inspection interval.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0253", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "After Mitigation - Monitoring and Verification", "question": "My neighbor had their mitigation system installed the same day mine was - their reading dropped to 0.4 but mine is still at 2.8. Why the difference?", "answer": "Every house is different. The sub-slab conditions - how porous the fill is, where the entry points are, how the suction communicates across the slab - vary house to house even next door. Your installer may need to add an additional suction point, move the pipe location, or increase fan capacity. At 2.8, the system is helping, but there's likely an adjustment that would get you lower. Contact the installer with your monitor data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0254", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "After Mitigation - Monitoring and Verification", "question": "Should I turn off my mitigation system when I'm not home to save electricity?", "answer": "No. The system needs to run continuously to maintain the sub-slab pressure field that prevents radon from entering. Turning it off - even for a few hours - allows radon to begin accumulating again. These fans are designed to run continuously; the electricity cost is modest. Leave it on.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0255", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "After Mitigation - Monitoring and Verification", "question": "My mitigation system is 15 years old - does the fan need to be replaced?", "answer": "Mitigation system fans typically have a lifespan of roughly 10 to 15 years, though many last longer. If your fan is 15 years old, it's worth having it inspected. The monitor reading is the best indicator of fan performance - if it's still holding radon below 2.0 pCi/L, the fan is still working. If the reading has started to creep up, the fan may be losing suction and should be evaluated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0256", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Miscellaneous Real Questions from Real People", "question": "My aunt says she read that radon monitors can give false alarms near granite countertops - is that true?", "answer": "Some natural stone, including certain granites, contains trace amounts of naturally occurring radioactive materials and can off-gas small amounts of radon. However, the amount is typically very small compared to radon entering from the soil. If your monitor is right next to granite countertops, that could contribute a tiny amount to the reading. For a general home measurement, place the monitor in the basement or living space, not directly next to a granite countertop.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0257", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Miscellaneous Real Questions from Real People", "question": "I've heard radon is only a problem if you smoke - is that true?", "answer": "No. Radon causes lung cancer in non-smokers too. The risk is significantly higher if you both smoke and live with elevated radon - the combination is more dangerous than either alone - but non-smokers do develop radon-related lung cancer. The EPA's guidance applies to everyone in the home, not just smokers.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0258", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Miscellaneous Real Questions from Real People", "question": "My sister-in-law says opening the basement windows for a few days will permanently fix our radon - is she right?", "answer": "No. Ventilation reduces radon temporarily by diluting it with outdoor air. Close the windows again and radon will rise back up. Radon enters continuously from the soil; it's not something you can air out once and be done with. The permanent fix is a mitigation system that changes the pressure dynamics so radon gets vented before it enters the living space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0259", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Miscellaneous Real Questions from Real People", "question": "Can I test radon myself or do I have to hire someone?", "answer": "You can absolutely test yourself. Consumer monitor options like RadonEye, Ecosense, and SafetySiren are designed for homeowner use. You can also buy a short-term charcoal canister test kit from a home improvement store or online and mail it to a lab. Self-testing gives you useful information. For a formal real estate transaction, a certified professional test is typically required, but for your own peace of mind, DIY testing is straightforward and valid.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0260", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Miscellaneous Real Questions from Real People", "question": "I bought a charcoal test at Home Depot and a RadonEye - can I run them at the same time?", "answer": "Yes, and that's actually a smart approach. Running both simultaneously lets you cross-check the results. Place the charcoal canister in the same general area as the RadonEye for the required exposure period, mail the canister to the lab, and compare the lab result with the RadonEye average for that same period. The two results should be in reasonable agreement - this verifies both methods are working correctly for your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0261", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Miscellaneous Real Questions from Real People", "question": "My kids spend a lot of time playing in the finished basement - does that change how urgently I should deal with a high reading?", "answer": "Yes - the amount of time spent in a space matters for cumulative exposure. If your children are spending several hours a day in a basement with elevated radon, that cumulative exposure adds up faster than occasional use. That's a good reason to prioritize testing and mitigation if the level is elevated. Kids also have more years of future exposure ahead of them, which is why long-term risk accumulation matters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0262", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Miscellaneous Real Questions from Real People", "question": "Does a radon monitor affect my homeowner's insurance?", "answer": "Radon monitors and mitigation systems don't typically affect homeowner's insurance premiums in any significant way. Insurance is primarily about sudden losses, not long-term health risks. If anything, having a mitigation system installed may be viewed positively in a home inspection context. Check with your insurer for your specific policy, but this isn't generally a coverage concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0263", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Miscellaneous Real Questions from Real People", "question": "My reading is 11.2 pCi/L - is that dangerous?", "answer": "11.2 pCi/L is significantly elevated - nearly three times the EPA's 4.0 pCi/L action level. This warrants prompt action. Radon at that level from sustained, long-term exposure carries meaningful health risk. Get a mitigator out for an assessment soon. In the meantime, increase ventilation in that area and limit time in the affected space until a system is installed. This is a very solvable problem - call someone this week.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0264", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Miscellaneous Real Questions from Real People", "question": "Do radon monitors need to be plugged in to work or can they all run on batteries?", "answer": "It varies by brand and model. RadonEye runs on batteries. SafetySiren is plug-in only. Ecosense models vary by version - some are battery-powered, some have charging options. Check the specific model you're buying. Battery-powered devices have the advantage of running during power outages; plug-in devices don't need battery management but go offline if power is lost.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-radoneye-ecosense-safetysiren-0265", "phase": "phase3", "type": "answered_qna", "topic": "workflow-radoneye-ecosense-safetysiren", "category": "workflow-radoneye-ecosense-safetysiren", "subtopic": "Miscellaneous Real Questions from Real People", "question": "I run an Airbnb in my basement - should I have a radon monitor?", "answer": "Yes. Guests spending time in your basement are being exposed to whatever radon level exists there. Many Airbnb hosts already have CO and smoke detectors as best practice; a radon monitor is a logical addition, especially in a basement rental. If your level is elevated, mitigation protects both your guests and your family. Some guests specifically ask about radon in basements, and having data is better than guessing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "workflow-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon just spiked to 12 pCi/L for one night. Does that mean I have a problem?", "answer": "One night at 12 pCi/L is worth paying attention to, but it doesn't automatically mean your long-term average is that high. Radon fluctuates - barometric pressure, wind, temperature, and whether your windows were open all affect what the monitor sees on any given night. What matters is the long-term average, ideally over 90 days or more in the lowest livable area of your home. Even so, a spike that high usually means there's a meaningful radon source below your slab, so it's worth watching the trend. If the average keeps climbing, that's when you act.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon went up to 20 pCi/L overnight. Is that possible?", "answer": "Yes, it's possible, and it doesn't mean your house is falling apart. Short-term spikes can be dramatic - a closed-up basement during a pressure drop, a storm rolling through, a humid night with no airflow. The sensor is doing its job; it's just catching a moment when conditions pushed radon up aggressively. The number that drives your decision should be the 90-day or long-term average, not a single overnight peak. If you're seeing frequent nights above 10 pCi/L though, that's a signal worth taking seriously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My monitor showed 8 pCi/L for one hour and then came back down to 2.5. Should I be worried?", "answer": "That kind of swing is more common than people expect. Radon readings at the hourly level are noisy - the sensor is working with a small sample of air, and localized factors like someone opening a door, a pressure change, or a heating cycle kicking on can all move the number. The one-hour reading at 8 pCi/L is real data, but it's not your whole picture. Watch what your 7-day and long-term averages do over the coming weeks. If those stay under 4.0, you're probably seeing normal fluctuation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon spiked to 15 pCi/L for two days straight. Is that a crisis?", "answer": "Two straight days above 10 pCi/L is a notable data point, not a crisis, but it does suggest you have a meaningful radon source in the ground beneath your home. Radon at those levels consistently would be a reason to mitigate. At this point, I'd want to know what your long-term average looks like - if you've been under 4.0 for months and this is a weather-related spike, it's different than if your baseline has been creeping up. Either way, this is worth a conversation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My Airthings hit 25 pCi/L last night and I'm freaking out. What do I do?", "answer": "Take a breath. That reading is alarming to see on a screen, but one night at 25 pCi/L does not mean you've been living in a high-radon house for months. Radon risk is about cumulative exposure over years, not a single bad night. Check your 7-day and long-term averages - those are what actually reflect your real exposure. If the long-term average is well below 4.0 pCi/L, last night was likely an anomaly driven by weather or pressure. If the long-term average is also high, then yes, you need mitigation. But either way, you have time to get the right information before doing anything.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon jumped from 2 to 9 in a single day. What causes that kind of jump?", "answer": "Barometric pressure is usually the culprit. When pressure drops rapidly - ahead of a storm front - the soil beneath your slab releases radon faster, and your basement essentially acts like a vacuum pulling it in. You can sometimes predict these spikes by watching the weather forecast. A sudden weather system, high winds, or a cold front can all cause dramatic short-term spikes even in homes where radon is otherwise manageable. Look at your long-term average to put this in context.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon was 3.0 for two weeks then shot up to 11 pCi/L for three days and went back down. What happened?", "answer": "Almost certainly a weather event. That kind of pattern - baseline, spike, return to baseline - is textbook pressure-drop behavior. The three-day window usually lines up with a storm system moving through or a period of low barometric pressure. It's genuine radon coming out of the ground; the conditions just temporarily amped up how much was entering the house. Your long-term average is the number to watch. If that stays under 4.0, this was normal variability. If it keeps inching upward, that's a different story.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "I have a finished basement and my radon hit 18 pCi/L for two days. Do I need to evacuate?", "answer": "No, you do not need to evacuate. Radon is a long-term lung-cancer risk from cumulative radiation exposure over years - two days at 18 pCi/L does not cause acute harm. Even so, if your long-term average is also elevated, mitigation should be on your near-term list. There's no need to panic, but there is good reason to get more data and take action if the averages confirm the problem. Call or text and we can look at what your numbers mean for your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon spiked the night I ran a space heater in the basement. Did the heater cause it?", "answer": "Not directly. Space heaters can affect airflow and depressurization in a basement - they draw air upward as heat rises, which can pull more radon-laden air in from the soil. It's less about the heater itself and more about how the heating cycle changes the air pressure dynamics in the space. One night isn't enough to draw conclusions, but it's worth noting the pattern. If running the heater consistently produces higher readings, that's useful information about how your basement breathes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon spiked to 7 pCi/L the night I had a lot of people over in the basement. Could people cause a radon spike?", "answer": "A houseful of people won't directly cause a radon spike, but activity in the basement can change airflow in ways that affect readings. People moving around, doors opening and closing, and HVAC systems cycling differently can all influence what the monitor sees. A more likely explanation is that the gathering happened to coincide with a pressure or weather change. Look at your long-term average to see whether the baseline is actually elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon was 0.4 for months, then hit 6.2 last week. Is my monitor broken?", "answer": "It might be, but it's also possible the reading is real. Radon can genuinely spike with weather events, and a monitor that's been running on the low end isn't immune to that. Check whether the timing lines up with a storm, a cold snap, or a change in how the house was ventilated. If the spike was brief and the reading came back down close to 0.4, the monitor is probably working fine. If it's stayed elevated and the numbers don't make sense, Airthings and other manufacturers have troubleshooting steps - or you can run a short-term test kit alongside it to compare.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My monitor showed 0.0 pCi/L for the first two weeks and now it's showing 4.5. Is the monitor malfunctioning?", "answer": "It's unlikely to be a malfunction. The first week or two of readings on a new monitor are often lower or less stable because the sensor is still calibrating and accumulating data. Consumer radon monitors - including Airthings - tend to show more accurate averages after 30+ days of operation. The 4.5 reading after a couple weeks may actually be closer to your true average. If you're concerned, watch the trend over the next month and see where the long-term average settles.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon reading jumped to 9 pCi/L and there was a big thunderstorm that night. Is that a coincidence?", "answer": "Almost certainly not a coincidence. Thunderstorms are associated with rapid barometric pressure drops, which are one of the most reliable drivers of short-term radon spikes in basements. The drop in pressure effectively lets the soil beneath the slab \"breathe\" more aggressively, pushing radon upward. This is normal geophysical behavior - not a sign your house has a sudden new radon problem. Your long-term average is the number that actually reflects your exposure level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon spiked to 11 pCi/L for a week and then dropped back down to 2.8. Should I still mitigate?", "answer": "A full week at 11 pCi/L is more than a one-night anomaly, but coming back down to 2.8 is a good sign that the spike was weather-driven rather than structural. If your long-term average is landing under 4.0 pCi/L, the EPA guidance doesn't require mitigation - but the EPA also acknowledges that any level above 2.0 carries some risk worth considering. The frequency and duration of spikes like that one does factor into your cumulative exposure over time. Worth a conversation if you want to think it through.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "Can radon spike to dangerous levels in just a few hours?", "answer": "Yes, radon can move fast in the right conditions. A significant pressure drop ahead of a major storm can push readings from 2 pCi/L to 10+ in a matter of hours. Even so, the health risk from radon isn't about a few hours of high exposure - it's about what you're breathing over months and years. The spikes are real, but the number that drives the health risk calculation is your long-term average, not a single afternoon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon reads normal all day but spikes at 3am. Is that normal?", "answer": "Yes, that's a very common pattern. In the early morning hours - roughly 2 to 5am - homes tend to be tightly closed, HVAC systems may be on different cycles, and the stack effect (warm air rising and pulling soil air in from below) often peaks. Wind is also typically calmer at night, which reduces natural pressure balancing. These conditions consistently produce higher radon readings in the early morning hours. Your long-term average accounts for all of those cycles together.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon monitor shows a spike every single morning around 4am and then it comes down. Does that mean there's a crack under the floor?", "answer": "It probably means your house has normal overnight depressurization, not necessarily a specific crack. The 4am pattern is very typical - tight house, calm outside, stack effect working all night. Even so, if the spikes are consistently very high (above 10 pCi/L) or your long-term average is above 4.0, the source could well be entry points worth addressing. A mitigation system would blunt those nightly spikes even without knowing exactly which crack or gap is responsible.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "I left for vacation for two weeks and when I came back my Airthings average had gone up a lot. What happened?", "answer": "A closed-up house with no ventilation for two weeks is a perfect setup for radon to accumulate, especially in the basement. With no one opening windows or doors, no regular HVAC cycling from daily use, and potentially different pressure conditions, radon can build up noticeably. The elevated reading makes sense given what the house was doing. Watch what happens to the average over the next few weeks now that you're back and the house is being used normally - it will likely settle back toward your normal range.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon jumped the day after we had a big wind event. I thought wind would lower radon?", "answer": "Wind is complicated when it comes to radon. High winds can create pressure differentials around your house - on one side of the home there may be positive pressure, and on the other side, negative pressure pulling air in. Depending on how your home is oriented and where your radon entry points are, wind can actually drive radon in rather than push it away. It's counterintuitive but well-documented. What you saw is real.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon shot up to 13 pCi/L and the next day it was 1.8. Is the monitor accurate or is it just randomly guessing?", "answer": "Consumer radon monitors aren't guessing - they're measuring radon decay products in the air. But hourly and daily readings do have more variability than long-term averages because radon itself fluctuates. The swing from 13 to 1.8 in 24 hours is large but not impossible if conditions changed dramatically (a storm passing, windows opened, HVAC shifted). If you see that kind of range frequently with no obvious explanation, it's worth checking whether the monitor is placed correctly - away from exterior walls, HVAC vents, and off the floor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Single-Night Spikes and High Short-Term Readings", "question": "My radon hit 30 pCi/L for one reading and I have never seen it that high. Should I call someone immediately?", "answer": "One reading at 30 pCi/L is alarming-looking but needs context. Check the time it occurred - if it was during a storm, overnight, or after something changed in the house, it's likely a genuine spike rather than a sensor error. One hour at 30 pCi/L does not represent a health emergency, but it does suggest your home can produce very high radon under certain conditions, and that typically means the long-term average is higher than you'd want it to be. I'd be happy to talk through the full picture with you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "Is the 24-hour reading or the long-term average more important?", "answer": "The long-term average is far more important for making decisions. A 24-hour reading is a snapshot - it catches whatever conditions happened to exist in that slice of time. Radon naturally rises and falls with weather, season, and daily cycles. The long-term average - ideally 90 days or more - smooths out all of that noise and gives you a realistic picture of what you're actually breathing over time. The 24-hour number is useful for spotting trends and understanding patterns, but don't make a mitigation decision based on a single day.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "What is the difference between a 24-hour reading, 7-day reading, and long-term average?", "answer": "A 24-hour reading is a single day's snapshot - useful for noticing patterns but heavily influenced by whatever conditions existed that day. The 7-day reading starts to smooth out daily swings and gives a better picture of your weekly norm. The long-term average - which most digital monitors calculate over 30, 60, or 90+ days - is what the EPA and health agencies use as the basis for action decisions. The longer the average, the more reliable it is. For a decision about mitigation, you want at least 90 days of data collected with closed windows and doors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My Airthings was 1.5 for 6 months and now it's 4.8. What happened?", "answer": "A jump like that over time is worth investigating rather than dismissing. A few things could cause it: seasonal change (fall and winter typically drive radon up), a change in how the house is being used (closed up more, basement more finished), or a new source of entry (crack, gap, sump pit opening). It's also possible earlier months averaged low because of open windows in summer. Check whether the timing of the change matches a season shift. If you're now consistently above 4.0, that's the threshold where the EPA recommends fixing it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My monitor's long-term average just crossed 4.0 pCi/L. What do I do?", "answer": "The EPA recommends mitigation at 4.0 pCi/L and above - so crossing that line is a reasonable trigger to act. A mitigation system (typically a sub-slab depressurization system) installed by a qualified contractor will almost always bring levels well below 2.0 pCi/L in most homes. You don't need to panic - this isn't an emergency - but it is a good time to move forward. Give us a call and we can walk through what the process looks like for your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "How long does it take before a new radon monitor gives me a number I can actually trust?", "answer": "Most consumer monitors - Airthings, RadonEye, Ecosense - are considered more reliable after about 30 days, and significantly more reliable after 90 days. The early readings can be skewed by the sensor calibrating, by seasonal conditions, or by recent changes to the house. The device manufacturer will usually tell you the same. Don't panic over week-one numbers, but do keep watching. For a formal decision about mitigation, 90 days of data under normal closed-house conditions is the gold standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My first 24 hours of data on my new monitor were really high. Does that early data count?", "answer": "The first 24 hours are the least reliable data your monitor will ever produce. The sensor is still warming up, and the very first readings are often outliers. Most manufacturers acknowledge this - some devices actually flag early readings as preliminary. Don't include the first day or two in any average you're using to make decisions. Let the monitor run for at least a few weeks before treating the average as meaningful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "I've had my Airthings running for 3 days and it says 6.2 pCi/L. Should I be making calls?", "answer": "Three days is not enough data to make a confident decision. The 6.2 reading could be real, or it could reflect the sensor still settling in, a weather event, or early variability. Let it run for 30 days at minimum - 90 days is better. If after 30 days your average is still above 4.0, then yes, it's time to have a conversation about mitigation. The number at day 3 is a data point, not a diagnosis.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My radon has been between 2.0 and 3.5 for 3 months. What does that mean?", "answer": "It means you're in the EPA's \"consider mitigation\" zone - not at the action threshold of 4.0, but above 2.0 where the EPA says the risk is lower but real and worth thinking about. Some homeowners in that range choose to mitigate, especially if they spend a lot of time in the basement, have kids in the home, or have a family history of lung cancer. Others choose to monitor and watch. There's no wrong answer here - it's a risk tolerance decision. Happy to talk through it if it would help.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My 24-hour reading is 1.2 but my long-term average is 3.8. Which should I trust?", "answer": "Trust the long-term average. A single low day - maybe you had windows open, maybe weather conditions were favorable - doesn't represent your real exposure. The 3.8 long-term average built up over weeks or months of normal conditions is a much better reflection of what you're actually living with. At 3.8, you're just under the EPA's action threshold, but you're above 2.0 where the EPA says it's worth considering mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My short-term average is way higher than my long-term average. Which one should I use?", "answer": "In this case, the long-term average is still your most reliable number. If you're in winter and the short-term average is running high, that seasonal factor will eventually pull the long-term average upward too. But don't make a decision based only on a week of elevated readings during an unusual weather stretch. Even so, if your short-term average is consistently well above your long-term average and your long-term average is already at or near 4.0, that's a signal worth acting on.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My 90-day average is 3.9. My husband says we're under 4.0 so we're fine. Is he right?", "answer": "He's technically correct that you're under the EPA's action threshold of 4.0 pCi/L - but I'd push back a little on \"fine.\" The difference between 3.9 and 4.0 is not meaningful from a health standpoint; those are essentially the same level of risk. The EPA also says levels between 2.0 and 4.0 are worth considering mitigation because the risk is lower but real. At 3.9, you're an inch under a line that was set for practical guidance, not because 4.1 is dangerous and 3.9 is perfectly fine. It's your call - but I wouldn't dismiss it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My radon is 3.9. My husband says we're under 4.0 so we're fine. But I'm pregnant. Does that change anything?", "answer": "The EPA's guidelines don't have a specific pregnancy threshold separate from the general 4.0 pCi/L recommendation, and radon's known risk is long-term lung cancer from cumulative radiation - not an acute pregnancy risk. Even so, it's completely reasonable to want lower levels while pregnant. Many families in the 2.0-4.0 range choose to mitigate, especially when there are kids or other vulnerable family members in the home. If it gives you peace of mind, mitigation at 3.9 is a defensible choice. For specific medical questions, loop in your OB.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My radon reads 4.1 pCi/L on a 90-day average. Is that bad?", "answer": "4.1 pCi/L on a 90-day average is the level where the EPA says you should mitigate. It's not an emergency - radon risk is long-term - but 4.1 over years does carry real cumulative lung-cancer risk, and a mitigation system can typically bring it down below 1.0 pCi/L. There's no reason to wait on this one. Mitigation is a straightforward process and the peace of mind is worth it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My radon has been at 5.5 pCi/L for over a year. Is that really dangerous?", "answer": "Living at 5.5 pCi/L for a year is above the EPA's action threshold, and yes - the cumulative lung-cancer risk from that level of long-term exposure is real and meaningful, particularly if you spend significant time in the home. Radon is the second leading cause of lung cancer in the United States. It's not a number to set aside. The good news is that mitigation almost always works very well, and it can bring a home from 5.5 down to below 1.0 pCi/L in most cases. Getting this fixed is the right move.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My radon is 7.0 pCi/L. How urgent is this?", "answer": "At 7.0 pCi/L, you're well above the EPA's action level, and the cumulative risk from prolonged exposure is significant. I wouldn't call it a drop-everything-this-afternoon situation, but I also wouldn't drag my feet. Aim to have a qualified contractor in within the next few weeks. The longer you wait, the more cumulative exposure accumulates - especially if you or family members spend time in the lowest levels of the home. This is fixable, and fixed well by most qualified contractors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "What radon level should I actually be worried about?", "answer": "The EPA says fix at 4.0 pCi/L and consider it seriously between 2.0 and 4.0. The World Health Organization uses a lower reference level of 2.7 pCi/L. Realistically, the lower your long-term average, the lower your cumulative risk over a lifetime. There's no level that's completely without risk, but below 2.0 pCi/L, the risk is low enough that most health agencies don't recommend intervention. Between 2.0 and 4.0 is a gray zone. Above 4.0 is a clear action zone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My radon is 2.2 pCi/L. Should I be worried?", "answer": "At 2.2 pCi/L, you're in the range where there is some risk - the EPA acknowledges that - but it's below the action threshold. Whether you choose to mitigate is a personal decision based on how much risk you're comfortable with and factors like how much time you spend in the basement and whether anyone in the home has existing lung disease or a history of smoking. Many people at 2.2 choose to monitor and watch; others at that level choose to mitigate for peace of mind. Either choice is reasonable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Long-Term Average vs. Short-Term Readings", "question": "My average went from 1.8 to 3.5 after we replaced old windows. Is that related?", "answer": "Possibly, yes. New windows that are better sealed reduce natural air infiltration - which is one of the things that dilutes radon in a basement. Older drafty windows essentially ventilate the space passively; tighter new windows eliminate that. It's counterintuitive but common: weatherization and energy efficiency upgrades can sometimes push radon up by reducing the leakage that was keeping it diluted. This is a known effect and a reason why radon monitoring after major home improvements makes sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon reading is different every hour. Is that normal?", "answer": "Yes, that's completely normal. Radon levels in a home fluctuate throughout the day based on temperature, barometric pressure, HVAC cycles, outdoor wind, and whether windows or doors are open. Consumer monitors show you this real-time variability, which can feel alarming when you're used to seeing a single test result. The hourly swings are real - radon really is moving around - but they don't change your health risk picture. Your long-term average is what matters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon is higher at night than during the day. Why?", "answer": "This is very common and has a few causes. During the day, the sun heats the house, HVAC systems run more actively, and more windows or doors might be open - all of which dilute or exhaust radon. At night, the house is closed up, the stack effect (warm air rising and pulling air in from below) is more pronounced, and outdoor winds are calmer, so there's less natural pressure equalization. The result is consistently higher radon readings at night and in the early morning hours.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon is higher in winter than summer. Is that normal?", "answer": "Yes, this is one of the most consistent patterns in radon behavior. In winter, homes are closed up tight - no open windows, better-sealed doors, and the heating system creating upward airflow that draws more soil air in from below. In summer, more natural ventilation keeps levels lower. This is why the EPA recommends testing with windows and doors closed (simulating winter conditions) - that gives you the worst-case average, which is the number relevant for your year-round risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon goes up every time there's a storm. What's causing that?", "answer": "Storms are associated with dropping barometric pressure, and barometric pressure is one of the primary drivers of radon flux from soil into homes. When outdoor pressure drops, the pressure differential between the soil and the interior of your home changes - effectively the house draws in more soil gas, including radon. High-wind conditions can also create negative pressure on certain sides of the home. It's predictable physics, and it's why radon averages measured during stormy periods can be higher than your true long-term norm.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon goes up when it rains. Is that a radon problem or just weather?", "answer": "Both, really. Rain can temporarily seal the surface soil, reducing the radon's escape path upward and forcing it to flow laterally toward the pressure difference under your home. Rainstorms also typically bring pressure changes. The result is a real radon spike, but it's weather-driven rather than a sign that something new broke. Your long-term average accounts for these rainy-day spikes as part of your overall exposure picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon jumped when it rained. Does that mean my basement leaks and that's letting in radon?", "answer": "A leaky basement and high radon can coexist, but they're not the same problem. Radon typically enters through soil gas - the air in the soil - not through water. A crack that lets in water could also let in radon-laden soil air, but the rain spike you're seeing is more likely to be the pressure and soil-sealing effect described above than water carrying radon in. If your basement also takes on water, that's a separate structural issue worth addressing, but fixing a water leak alone won't reliably fix a radon problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon spiked after I ran the whole-house fan. How is that possible?", "answer": "A whole-house fan is designed to pull air into the house to cool it - which means it creates significant negative pressure inside the home. That negative pressure pulls air in from every available path, including the soil beneath the slab. Running a whole-house fan is one of the most reliable ways to temporarily spike radon in a basement. This is well-documented, and it's one reason mitigation systems and whole-house fans can sometimes interact. It's not a permanent change to your baseline - the reading should come back down once the fan is off.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon dropped after I opened the windows. Does that mean mitigation isn't needed?", "answer": "Opening windows reduces radon by diluting and exhausting the basement air - that's real and it works temporarily. But you can't keep windows open year-round, especially in the Midwest, and an open-window strategy doesn't address the source. The minute you close up for winter, radon goes right back up. Mitigation fixes the underlying pressure dynamics so radon doesn't enter the house - that's a permanent solution rather than a ventilation workaround. If your readings drop significantly with open windows, that's actually useful data showing the system will respond well to depressurization.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon was 4.5 during winter and dropped to 1.8 in summer with windows open. Should I mitigate?", "answer": "Your winter number is the one that drives your risk. You spend most of the heating season with the house closed - and your long-term exposure is a blend of winter highs and summer lows. A 4.5 average in winter, measured under real closed-house conditions, meets the EPA's threshold for recommending mitigation. The 1.8 in summer is great but doesn't represent your full-year average. Mitigation would bring both seasons down and remove the need to worry about it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon went up after we added insulation to the basement. Why?", "answer": "Better insulation reduces natural air infiltration, which was previously diluting radon. When you seal and insulate the basement - even with good intentions - you can reduce the passive ventilation that was keeping radon from accumulating. It's a well-known side effect of energy efficiency upgrades. The fix is the same either way: a sub-slab depressurization system that actively removes the radon from under the slab before it enters the house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon went up after we finished the basement. Is that related?", "answer": "Finishing a basement is one of the most common triggers for discovering a radon problem. When the basement was unfinished, it may have had gaps, vents, or unsealed areas that passively diluted or exhausted air. Finishing the space - adding drywall, flooring, and improved sealing - can reduce natural ventilation and concentrate radon. More importantly, once it's finished and livable, the exposure matters more because people are actually spending time down there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon dropped after the contractor sealed a crack in my basement floor. Is that real?", "answer": "It can be. If that crack was a significant entry point for soil gas, sealing it could genuinely reduce radon. Even so, radon enters through multiple pathways - pores in the concrete, floor-wall joints, pipe penetrations - so sealing one crack rarely eliminates the problem entirely. A modest improvement is plausible, but if your baseline was above 4.0, a single sealed crack is unlikely to bring you into a long-term safe range. Watch your average over the next 30-60 days to see how much the improvement holds.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon reading changed after we moved furniture around. Could moving things affect it?", "answer": "Not in any meaningful way. Moving furniture doesn't change the underlying radon dynamics of the space. The timing of the reading change is more likely coincidence - weather, season, or pressure - than anything the furniture was doing. If the monitor was moved and is now closer to an HVAC vent, a window, or an exterior wall, that could affect the readings. Monitor placement matters; furniture doesn't.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon reading varies wildly depending on where I put the monitor in the basement. Why?", "answer": "Radon isn't perfectly uniform throughout a space - there can be pockets where air moves differently, where entry points are concentrated, or where HVAC creates mixing effects. A monitor near a floor drain, sump pit, or crack will read differently than one in the middle of the room. The EPA recommends placing monitors at least 20 inches off the floor, away from exterior walls and HVAC vents, in the area where people spend the most time. That placement gives you the most meaningful data for health risk purposes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon goes up when the furnace kicks on and comes back down when it stops. Is that normal?", "answer": "Yes, this is a common pattern. Furnaces draw combustion air and create pressure changes in the basement. When a furnace ignites, it can temporarily depressurize the space, drawing in more soil air. Some furnaces are particularly strong at creating this effect. The fix - a mitigation system - works by reversing the pressure dynamic under the slab, so that soil air is pulled away from the house rather than into it, regardless of furnace cycles.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon is different upstairs than in the basement. Which reading counts?", "answer": "For health risk and EPA guidance purposes, you test and mitigate based on the lowest livable level of your home - which is almost always the basement. That's where radon is highest and where the exposure matters most. The upstairs reading is typically lower because radon dilutes as it rises through the house. If your basement average is above 4.0, that's the driver of your mitigation decision, even if the first floor reads well below that.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My basement monitor says 3.0 but my first floor monitor says 0.8. Which matters?", "answer": "Both matter for different reasons, but for the EPA's action threshold and mitigation decisions, your basement number is the controlling one. The 3.0 in the basement is what family members spending time in that space are actually breathing. The 0.8 upstairs is good information - it tells you radon isn't heavily migrating to the living floors - but it doesn't change the fact that the basement exposure is above 2.0 pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "Two monitors in the same basement show different readings. Which one is right?", "answer": "Consumer radon monitors have measurement variability built in - different brands use different detection methods and different averaging algorithms. Two monitors in the same room can reasonably show readings 10-30% apart on any given day and still both be \"accurate\" within their specs. Averaging the two readings is a reasonable approach. If they're wildly different (one showing 0.5 and the other showing 8.0), one may be malfunctioning or poorly placed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My Airthings and my neighbor's Airthings show different readings even though our houses are right next to each other. Why?", "answer": "Radon varies significantly from house to house on the same street - even on the same lot. It depends on the construction type, the slab condition, the basement finishing, the HVAC setup, and the specific geology directly under each home. Your neighbor being at 1.0 pCi/L doesn't tell you anything about what's happening under your foundation. Radon really is that local.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon reading at 6am is almost always higher than at 6pm. Is there a rule to when radon is highest?", "answer": "The general pattern is that radon peaks in the early morning hours - typically between 2am and 6am - and is lower in the afternoon. Overnight, the house is closed, the stack effect is active, and natural ventilation from human activity is absent. By afternoon, solar heating, HVAC activity, and the normal air movement of daily life have diluted and exhausted some of the overnight accumulation. It's not a rigid rule, but it's a consistent enough pattern that researchers have documented it across many home types.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon goes way up on weekends. I don't understand that at all.", "answer": "Think about what changes on weekends. If you're home more, you may be opening and closing doors more - but you might also be cooking more with hoods exhausting air, running exhaust fans, or keeping the basement more active. Alternatively, if weekends mean more people in the basement watching TV with it all closed up, you might be more accurately capturing basement air. Also check whether your weekends match weather pattern changes. Correlation between weekends and high readings is often coincidental rather than causal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Normal Variation, Daily Patterns, and Why Readings Fluctuate", "question": "My radon was fine for two years and now it's creeping up. Did something change in the house or the ground?", "answer": "Both are possible. In the house: new weatherization, a finished basement, a new sump pump, or a sealed foundation crack (paradoxically forcing radon through other paths) can all push readings up. In the ground: natural soil settling, frost/thaw cycles that open new pathways, and changes in the local water table can shift radon behavior over years. If your long-term average has now crossed 4.0 after being stable, it's worth acting on regardless of why it changed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "My monitor shows 0.0 pCi/L. Is that possible or is it broken?", "answer": "It's possible, though uncommon. Some very well-ventilated spaces - particularly above-grade rooms with lots of fresh air exchange - can read close to or at the detection floor of consumer monitors. It's also possible the monitor hasn't accumulated enough data yet, or that it's averaging across a very stable low-radon period. If it's staying at 0.0 for weeks, check that it's powered on properly and placed where it's supposed to be. Some monitors won't display a reading below their minimum detection threshold and will show 0.0 rather than a fractional number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "My monitor shows 0.3 pCi/L. Is that actually zero?", "answer": "Not technically, but for practical health purposes it's as low as it gets. The EPA's outdoor air average is about 0.4 pCi/L - so 0.3 pCi/L is essentially outdoor-level radon inside your home. That's an excellent result. Consumer monitors at that range are operating near the edge of their detection capability, but the reading is real and it means radon is not a concern in your home at this time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "How accurate is the Airthings Wave Plus?", "answer": "Airthings publishes accuracy specifications for their devices, and the Wave Plus is one of the more capable consumer monitors on the market for long-term tracking. Like all consumer monitors, it's more accurate over longer averaging periods - hourly and daily readings have more uncertainty than 90-day averages. It's a useful tool for tracking trends and making decisions. For a definitive pre-purchase or post-mitigation measurement, a lab-analyzed test kit gives you a more defensible result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "Is a consumer radon monitor as accurate as a professional test?", "answer": "Professional charcoal canisters and alpha track detectors sent to a lab have tighter quality control and certified accuracy. Consumer monitors are generally reliable for trend monitoring and long-term averages, but there's more variability in their readings, especially day-to-day. For a real estate transaction, a certified short-term or long-term test is the standard. For general home monitoring and trend awareness, a quality consumer device like Airthings or RadonEye is a solid tool.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "My monitor stored data while my phone was away for a month. Is that data accurate?", "answer": "The monitor itself collects data whether or not your phone is nearby - most devices store readings onboard. When you reconnect your phone, it syncs the historical data. That stored data is just as accurate as real-time data; the Bluetooth connection is only for display, not for measurement. Your readings during that month are valid and should be included in your averages.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "My Airthings showed a spike that looks off the chart on the graph. Is the data corrupted?", "answer": "A spike that looks like a data artifact - shooting straight up and back down to zero or to an impossibly high number in one reading - can sometimes be a sensor glitch or a data sync issue. Check whether the spike corresponds to a real event (storm, pressure drop, whole-house fan use). If the surrounding readings look normal and the spike is isolated to a single data point that doesn't fit any pattern, contact Airthings support - they can help determine whether it's a real reading or a device anomaly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "My RadonEye reads much lower than my Airthings. Which one should I trust?", "answer": "Both are quality devices, but they use different detection methods and calibration standards. Some users have found RadonEye reads lower than Airthings in direct comparisons; others have seen the reverse. Neither is definitively \"right\" in every case. If you're trying to resolve the discrepancy, run a certified charcoal canister test alongside them and compare. For the purposes of your own home monitoring, watch the trend on whichever device you trust more - consistency over time matters as much as the absolute number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "My monitor is brand new and showing 8 pCi/L on day one. Is that real?", "answer": "It might be, but take day-one readings with caution. Many monitors need a stabilization period - the sensor is new, environmental conditions vary, and the averaging algorithm may not have enough data to produce a reliable number. A high reading on day one is possible (especially if you're in a high-radon home), but don't act on it immediately. Let it run for at least 30 days and watch where the long-term average settles before making any decisions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "My monitor's battery is low. Does that affect the radon reading?", "answer": "Most monitors are designed to give reliable readings until the battery actually fails - they aren't known to produce inflated or inaccurate readings due to a low battery. But some devices may reduce their sampling frequency when battery is low, which can affect the accuracy of short-term averages. Replace the battery when prompted, and treat any readings from the low-battery period as potentially less reliable than normal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "My monitor is near the floor. Should I move it?", "answer": "Yes. The EPA recommends placing monitors at least 20 inches (about knee height) off the floor, away from exterior walls, away from HVAC vents, and not in closets or dead-air spaces. Radon is heavier than air and concentrates near the floor, so a floor-level reading will typically be higher than what people at standing or seated height are actually breathing. Moving it to table height in the main part of the basement will give you a more representative reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "My monitor is right next to my sump pump. Is that okay?", "answer": "Not ideal. A sump pump pit is one of the highest-radon spots in a basement - it's essentially an opening directly into the soil. A monitor placed right next to the sump pit will read much higher than what the rest of the basement air looks like. Move it to the center of the basement, at least 20 inches off the floor. If you have a sump pit, it should be sealed as part of a mitigation system anyway.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "My monitor is near an HVAC vent. Does that affect the reading?", "answer": "Yes, significantly. A monitor near a supply vent will be constantly diluted by fresh conditioned air and will read artificially low. A monitor near a return vent may read higher if it's drawing from basement air. Place the monitor in a stable location away from vents, windows, and exterior walls - somewhere that represents typical breathing-zone air in the space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "My neighbor said her Airthings was wrong and a professional test showed something different. Should I trust my Airthings?", "answer": "Consumer monitors are useful tools but aren't identical to certified lab tests. Airthings devices can be off from professional results, especially if they're still in their early averaging period, placed incorrectly, or if conditions during the test were unusual. For any decision that really matters - selling a home, post-mitigation verification, or unusually high readings - use a certified test kit as your reference. The Airthings is best used as a monitoring and trend tool, not as a definitive measurement device.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "Can my radon monitor detect a gas leak or anything else dangerous?", "answer": "No. Consumer radon monitors - whether Airthings, RadonEye, or others - measure radon specifically. They don't detect natural gas, carbon monoxide, or other hazardous gases. If you're concerned about those, you need dedicated detectors. Some multi-sensor devices include CO detection alongside radon, but a standalone radon monitor is single-purpose.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Monitor Accuracy, Placement, and Device-Specific Questions", "question": "My radon monitor says it detects VOCs too. Does that help me understand radon better?", "answer": "The VOC sensor on devices like the Airthings Wave Plus monitors air quality broadly - it measures volatile organic compounds like cleaning products, off-gassing from furniture, and mold-related gases. It's useful air quality information, but it has no direct relationship to radon. Radon is a radioactive gas from soil decay; VOCs are chemical compounds from indoor sources. High VOCs don't indicate high radon and vice versa.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Post-Event Changes: Flooding, Construction, and Home Improvements", "question": "My radon went up after a basement flood. Is that connected?", "answer": "Flooding and radon are connected in a few ways. Water entering from the floor or walls means those pathways are open - and the same gaps that let water in can also allow soil gas (including radon) in when it's dry. Additionally, a wet basement creates higher humidity, which can affect how radon moves through the space. If your radon went up after a flood, check the pathways the water came through and consider whether those are also radon entry points.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Post-Event Changes: Flooding, Construction, and Home Improvements", "question": "My radon went up after we added a sump pump. Is that related?", "answer": "Very likely. Sump pits are open access points to the soil and the sub-slab environment - prime entry zones for radon. If the pit is uncovered or poorly sealed, it's essentially a chimney for soil gas. Many mitigation systems incorporate a sealed sump lid with the mitigation pipe drawing from within it. If your radon increased after the sump pit was installed, sealing the pit is an important part of any mitigation approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Post-Event Changes: Flooding, Construction, and Home Improvements", "question": "My radon jumped after we jackhammered the basement floor to fix a drain. Is that related?", "answer": "Almost certainly. Jackhammering the floor opened up the sub-slab environment and may have disrupted pathways that were previously sealed over by concrete. Disturbing the slab also stirs soil gas and can temporarily release significant amounts of radon. After any kind of foundation floor work, it's normal to see elevated readings for a period. Let the averages settle over 30-60 days before deciding whether the elevated reading is the new baseline or a temporary post-construction spike.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Post-Event Changes: Flooding, Construction, and Home Improvements", "question": "My radon went up after we had a new water heater installed.", "answer": "A new water heater installation can temporarily affect radon in a few ways: the old equipment was removed and reinstalled, which disrupts airflow and potentially jostles seals; a power-vented water heater alters the pressure dynamics in the mechanical room; and if the installation required any concrete or floor work, that could open pathways. If the spike is recent, give it 30 days and watch the trend. If it persists, the new equipment may have changed how the mechanical room is pressurized.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Post-Event Changes: Flooding, Construction, and Home Improvements", "question": "Our contractor drilled holes in the basement wall to run new electrical. My radon jumped. Is that related?", "answer": "Possibly. Drilling into the foundation wall or floor creates new pathways for soil gas to enter. Even small holes can matter if they penetrate into the soil-contact zones. If your radon settled back down after the drilling was completed and sealed, it was likely a temporary disturbance. If the new reading is now your baseline, the holes may not have been sealed, and that's worth addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Post-Event Changes: Flooding, Construction, and Home Improvements", "question": "My radon went up after we installed a bathroom exhaust fan in the basement. Is that connected?", "answer": "An exhaust fan in the basement can create negative pressure, drawing in more soil air from below. Similar to a whole-house fan, an exhaust fan that's running significantly increases the pressure difference between the interior and the sub-slab environment - which pulls in more radon. Check whether the radon goes up specifically when the fan runs, or whether it's just a baseline shift. If it's concurrent with fan operation, that's your cause.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Post-Event Changes: Flooding, Construction, and Home Improvements", "question": "My radon increased after we had a crawl space encapsulation done. I expected it to go down. Why did it go up?", "answer": "Crawl space encapsulation sometimes redirects radon rather than eliminating it. If the encapsulation sealed pathways that were previously exhausting soil gas passively, radon may now be finding its way into the basement through other routes. A well-done encapsulation with active ventilation should reduce radon, but a poorly vented or sealed crawl space can sometimes push radon into adjacent spaces. This is worth discussing with whoever did the encapsulation work.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Post-Event Changes: Flooding, Construction, and Home Improvements", "question": "My radon went down after we put new flooring over the basement floor. Is that real?", "answer": "A new floating floor over the concrete can act as an additional barrier and may modestly reduce radon if the slab was a significant entry point. It's not a mitigation solution - radon still gets in through wall-floor joints, pipe penetrations, and other gaps - but a sealed floating floor can make a small measurable difference. If your long-term average is still above 4.0 after the flooring, the flooring hasn't solved the problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Post-Event Changes: Flooding, Construction, and Home Improvements", "question": "My radon jumped after we installed a wood-burning stove in the basement. Is that why?", "answer": "Yes, this is a documented cause of radon spikes. Wood-burning stoves consume large amounts of air for combustion and create significant negative pressure in the basement. They draw air from every available source - including soil-contact gaps - which can massively increase radon entry. This effect is similar to whole-house fans and some HVAC systems. A mitigation system should account for the combustion appliance when designing the solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Post-Event Changes: Flooding, Construction, and Home Improvements", "question": "My radon went up after we got a dog and started leaving the basement door open more. Could that be the cause?", "answer": "Counterintuitively, leaving an interior door open (especially to upper floors) can sometimes increase radon in the basement by changing the airflow and stack effect. The stack effect draws warm air upward through the house - when pathways are open between the basement and upper floors, it can increase the pressure difference between the basement and the sub-slab environment, pulling in more soil gas. It's a real effect, though usually a modest one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Post-Event Changes: Flooding, Construction, and Home Improvements", "question": "My radon dropped after we got new windows installed. Is that real?", "answer": "If the new windows improved ventilation pathways or changed how air moves through the basement, a modest reduction is possible. But new windows that are better sealed can sometimes go the other way (as noted earlier). If your readings genuinely trended down and held lower for 30+ days after window installation, that's real data worth noting. Just don't rely on window ventilation as a mitigation strategy - it's unreliable across seasons.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Very Low Readings and Zero Questions", "question": "I tested my house with a charcoal kit and it came back at 0.5 pCi/L. Is that as low as it gets?", "answer": "That's an excellent result. 0.5 pCi/L is well below any action threshold and close to the outdoor background level. Results like this in a basement are uncommon but not impossible - you may have very low local uranium concentrations in the soil, very good natural ventilation, or both. There's no action needed at that level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Very Low Readings and Zero Questions", "question": "Is it possible for a house to have zero radon? (Very Low Readings and Zero Questions)", "answer": "Not technically. Radon is a naturally occurring gas - it's everywhere in trace amounts, and outdoor air typically contains about 0.4 pCi/L. What some homes have is radon at or near outdoor background levels, which is the practical floor. Some monitor manufacturers will display 0.0 below a certain threshold, but it doesn't mean there is literally zero radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Very Low Readings and Zero Questions", "question": "My house tested at 1.1 pCi/L. Is that good?", "answer": "Yes, 1.1 pCi/L is a good result. It's well below the EPA's action level of 4.0 and below the EPA's consideration zone of 2.0. No action is needed. Continue monitoring periodically - radon can change over time as houses age and soil conditions shift - but at 1.1, you're in good shape.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Very Low Readings and Zero Questions", "question": "My new house tested at 0.8 pCi/L. Does that mean I'll never have a radon problem?", "answer": "It means you don't have a radon problem right now. Radon levels can change as a house ages, as soil conditions shift, as the foundation develops new cracks, or as you make changes to the home (better insulation, new HVAC, finished basement). Testing every two years is a reasonable habit even when your starting level is low.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Very Low Readings and Zero Questions", "question": "My basement has never had radon over 1.5 pCi/L. Do I still need to monitor?", "answer": "You don't need to monitor obsessively, but it's reasonable to check every couple of years, especially if you make major changes to the home. A reading of 1.5 pCi/L is low and not a concern - but radon can change. A periodic re-test gives you confidence that things haven't shifted.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Very Low Readings and Zero Questions", "question": "My upstairs bedroom tests at 0.4 pCi/L. Is that normal?", "answer": "Yes. Upper floors of a home typically have radon levels close to or at outdoor background levels. Radon dilutes as it moves up through a house. A 0.4 pCi/L reading upstairs means radon is not migrating significantly from the basement to the upper floors - that's normal and a good finding.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Threshold and Decision-Making Questions", "question": "My radon is 3.9. We're right at the line. What would you do in my situation?", "answer": "Honestly, I'd mitigate. The difference between 3.9 and 4.1 is not meaningful from a health or risk standpoint - those are essentially the same level. The 4.0 threshold is a guideline, not a biological cliff. At 3.9, you're spending years breathing that level of radon, and a mitigation system will bring it down to under 1.0 in most homes. That's a significant improvement in long-term risk for a one-time installation. It's worth it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Threshold and Decision-Making Questions", "question": "My radon is 4.0 exactly. What does the EPA say I should do?", "answer": "The EPA says fix it. Their guidance is to mitigate at 4.0 pCi/L or higher. At exactly 4.0, you're right at the line, and the EPA is clear that action is recommended. This isn't a borderline call - at 4.0, the recommendation is unambiguous.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Threshold and Decision-Making Questions", "question": "How long can I wait before mitigating if my radon is above 4.0?", "answer": "The EPA doesn't set a hard deadline because radon risk is cumulative - a few more months won't dramatically change your lifetime exposure picture. But there's also no reason to delay. Mitigation systems are installed in a day, they're effective immediately (though your monitor needs 30+ days to re-average), and the sooner you get it done, the sooner you stop accumulating exposure above 4.0. Aim to schedule within the next month or two if your average is confirmed above 4.0.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Threshold and Decision-Making Questions", "question": "My radon is 2.5. The guy at the hardware store said I shouldn't worry until it hits 4. Is he right?", "answer": "He's roughly in line with EPA guidance - the formal action threshold is 4.0. But the EPA also says that 2.0-4.0 is a range where you should consider mitigation because the risk is lower but real. At 2.5, whether you mitigate is a judgment call based on how risk-averse you are, how much time you spend in the basement, and personal health factors. The hardware store guy isn't wrong, but it's a more nuanced decision than \"don't worry.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Threshold and Decision-Making Questions", "question": "My wife wants to mitigate at 3.5 pCi/L. My brother says that's too cautious. Who's right?", "answer": "Your wife is making a reasonable call. The EPA says consider mitigation between 2.0 and 4.0, and 3.5 is well into that zone. Your brother is right that it's below the formal action threshold, but the threshold isn't a safety warranty - it's a guideline based on cost-benefit analysis across a large population. A homeowner who chooses to mitigate at 3.5 pCi/L is making a sensible, defensible decision.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-readings-spikes-interpretation-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Threshold and Decision-Making Questions", "question": "My radon is 5.0 and my husband doesn't want to spend the money on mitigation. How do I convince him?", "answer": "At 5.0 pCi/L, you're above the EPA's action level, and the long-term lung-cancer risk from sustained exposure at that level is real and meaningful. Radon is the second leading cause of lung cancer in the U.S. - behind only cigarette smoking - and it's responsible for roughly 21,000 deaths per year. The cost of mitigation is a one-time investment; the alternative is years of elevated exposure. Those numbers tend to make the conversation easier.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Threshold and Decision-Making Questions", "question": "My doctor said I should lower my radon. My test came back at 3.8. Can you help?", "answer": "Yes, absolutely. At 3.8 pCi/L, you're below the formal EPA action threshold but squarely in the zone the EPA says is worth considering. If your doctor has flagged it - particularly if there are lung health concerns - that's a very reasonable trigger to move forward. Give us a call and we can walk through what a mitigation system would look like for your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Threshold and Decision-Making Questions", "question": "My long-term average is 4.5 pCi/L. What exactly happens if I don't mitigate?", "answer": "Nothing immediate - radon doesn't cause headaches, fatigue, or acute symptoms. What happens over time is elevated cumulative radiation exposure to the lungs, which increases your long-term risk of lung cancer. The exact probability depends on how long you live in the home, how much time you spend in the basement, whether you smoke (radon and smoking are significantly synergistic), and other factors. At 4.5 pCi/L over decades of exposure, the risk is real and not trivial.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Threshold and Decision-Making Questions", "question": "My radon is 6.0 pCi/L and I've lived here for 10 years. Should I be worried about what I've already been exposed to?", "answer": "I understand why you're thinking about that. There's no test for past radon exposure, and there's no point in dwelling on what's already happened. What you can do is mitigate now - bringing levels down going forward significantly changes your long-term risk picture. If you have health concerns, talk to your doctor. From a radon standpoint, the best move is to fix it now and reduce future exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Threshold and Decision-Making Questions", "question": "Does radon cause headaches or fatigue? My monitor spiked and now I feel sick.", "answer": "Radon does not cause acute symptoms like headaches, sore throat, or fatigue. It is a long-term lung-cancer risk from cumulative radiation exposure - typically developing over years or decades of exposure. If you're feeling ill after noticing a high radon reading, the two are almost certainly not connected. Talk to a doctor about the symptoms. But radon itself doesn't produce the immediate physical effects that some people associate with it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Threshold and Decision-Making Questions", "question": "My neighbor said high radon made her daughter sick. Is that possible?", "answer": "Radon's known health effect is an increased risk of lung cancer from long-term cumulative exposure to radon decay products. It does not cause acute illness, allergies, headaches, or the kinds of symptoms that a child would notice in the short term. If your neighbor's daughter was sick, it's very unlikely radon was the cause. Radon is dangerous in a slow, cumulative way - not in a way that produces recognizable illness in the short term.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Specific Monitor and Technology Questions", "question": "What is the Airthings app showing me when it says \"current\" vs \"average\"?", "answer": "The \"current\" reading on Airthings apps is typically a recent short-term measurement - often the last hour or the last day's reading. The \"average\" is the long-term average the device has calculated since it started running (or since you reset it). For health and decision-making purposes, the long-term average is the number that matters. The \"current\" reading is useful for spotting patterns and seeing how conditions are changing in real time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Specific Monitor and Technology Questions", "question": "My Airthings app shows a \"trend\" arrow. What does that mean?", "answer": "The trend arrow indicates whether your radon levels have been moving up or down over a recent period - usually the last week or two. An upward arrow doesn't mean your levels are dangerous; it means they're higher recently than they were before. A downward arrow suggests things are improving. The trend is useful context for your long-term average, especially after a seasonal change or a home improvement project.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Specific Monitor and Technology Questions", "question": "Can I use multiple Airthings monitors in the same house and see them all together?", "answer": "Yes. Airthings devices connect to the same app and you can view all of them on one dashboard. This is useful if you want to monitor the basement and the main floor simultaneously. Each device tracks its own location's readings independently, so you get a complete picture of how radon moves through different levels of your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Specific Monitor and Technology Questions", "question": "My Airthings monitor hasn't connected to Wi-Fi in weeks. Are the radon readings still accurate?", "answer": "Yes. The Airthings monitors store data onboard regardless of Wi-Fi connection. When connectivity is restored, the historical data syncs to the cloud. The radon measurements themselves don't depend on internet connectivity - the device is measuring continuously. You may have a gap in your cloud history, but the average continues to be calculated by the device itself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Specific Monitor and Technology Questions", "question": "My RadonEye shows a different reading than the Airthings even though they're sitting next to each other. What gives?", "answer": "RadonEye and Airthings use different detection technologies and averaging windows. RadonEye uses a pulsed ionization chamber and is known for faster response times, while Airthings uses passive diffusion detection with longer averaging. They can produce notably different readings on any given hour or day, but their long-term averages tend to converge more closely. If you're trying to choose which one to trust, compare both against a certified test kit result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Specific Monitor and Technology Questions", "question": "How often do I need to replace or recalibrate my consumer radon monitor?", "answer": "Manufacturers typically recommend recalibration or replacement every 5-10 years, though this varies by device. Airthings, for example, states that their sensors maintain accuracy for several years under normal use. There's no standardized recalibration service for consumer monitors the way there is for professional instruments. If you've had a device for more than 5 years and you're making an important decision based on it, consider running a certified test kit alongside it to verify the readings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Specific Monitor and Technology Questions", "question": "My radon monitor fell off the shelf and hit the floor. Is it still accurate?", "answer": "It might be, but physical shock can affect sensor accuracy on some devices. Check whether the housing is cracked or damaged. Run a certified test kit alongside it for 30 days after the fall and compare. If the readings are consistent with what you'd expect for your home and the device shows no signs of damage, it's probably still working. When in doubt, contact the manufacturer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Specific Monitor and Technology Questions", "question": "My Airthings monitor shows \"very high\" in red. What does that mean on their scale?", "answer": "Airthings uses a color-coded scale: green (low), yellow (moderate), and red (very high). The specific thresholds vary by model but generally align with EPA guidance - red typically starts around 4.0 pCi/L or higher. A \"very high\" reading means your long-term average is at or above the level where mitigation is recommended. It's not an alarm or an emergency, but it's a clear signal to act.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Seasonal Patterns and Climate Questions", "question": "Does radon in Illinois or the Midwest tend to be higher than in other parts of the country?", "answer": "Yes. The Midwest - including Illinois, Iowa, Minnesota, Wisconsin, and Indiana - has some of the highest average radon levels in the country due to glacial soils and underlying geology rich in uranium and radium. The EPA has mapped zones of radon potential, and much of the Midwest falls in Zone 1 (highest potential). That doesn't mean every house has high radon, but it does mean testing is particularly important in this region.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Seasonal Patterns and Climate Questions", "question": "My radon is always high in October and November. Does that mean I should test specifically in those months?", "answer": "The EPA recommends testing during the heating season - fall through early spring - because that represents the worst-case conditions under which you actually live in a closed house. Testing in October or November is ideal. If your average during that period is above 4.0 pCi/L, that's your realistic worst-case exposure level. Mitigation should be based on those conditions, not a summer reading taken with windows open.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Seasonal Patterns and Climate Questions", "question": "My radon drops every spring when it warms up. Should I just keep the basement cooler to keep radon low?", "answer": "Temperature can affect radon to some degree, but it's not a reliable control strategy. The reason radon goes down in spring is primarily because windows open, ventilation increases, and the pressure dynamics change - not just because of the temperature itself. Keeping the basement artificially cool wouldn't replicate those effects and wouldn't meaningfully reduce radon. Mitigation addresses the actual entry mechanism.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Seasonal Patterns and Climate Questions", "question": "My radon went from 1.5 in summer to 5.8 in winter. Is that a big enough seasonal swing to warrant mitigation?", "answer": "Yes. A long-term average of 5.8 pCi/L during the heating season - when your home is actually closed up and you're spending the most time in it - is above the EPA's action level. Summer readings at 1.5 pCi/L are nice but don't represent your real-world exposure pattern. You live through winter too, and your cumulative exposure is dominated by the winter average. Mitigate based on the winter number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Seasonal Patterns and Climate Questions", "question": "My radon is 3.0 in summer and probably higher in winter. How do I account for the seasonal swing in my decisions?", "answer": "A good rule of thumb: long-term averages taken in winter or under closed-house conditions should be your reference point for decisions. If your summer average is 3.0, you can reasonably expect winter to be 20-50% higher, putting you potentially in the 3.5-4.5 range. Many homeowners in that situation choose to do a winter test specifically to get the worst-case number. If that winter number comes back above 4.0, the decision is clear.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Seasonal Patterns and Climate Questions", "question": "We rent our house out in summer. The tenants opened all the windows and now my yearly average looks low. Is that misleading?", "answer": "Yes, somewhat. If the summer period with open windows is pulling your annual average down significantly, that average isn't a realistic representation of what you breathe during the winter months when the house is occupied and closed up. For your own health decision-making, weight the winter readings more heavily. For a tenant in year-round residence, the average across all conditions matters, but seasonal patterns should be understood.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Seasonal Patterns and Climate Questions", "question": "My radon seems to be lower on sunny days and higher on cloudy days. Is that my imagination?", "answer": "It's not your imagination - it's consistent with what's known about barometric pressure. Sunny, stable weather is typically associated with higher barometric pressure, which pushes down on the soil and reduces radon outgassing. Cloudy days often precede or accompany lower pressure, which allows more radon to flow. The pattern is real, though not perfectly consistent.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Seasonal Patterns and Climate Questions", "question": "Does the ground freezing in winter affect radon levels?", "answer": "Yes. When the surface soil freezes, it can act as a sealed cap - similar to rain sealing the surface - that redirects radon flow downward and laterally toward the foundation. Frozen ground can push more radon toward your sub-slab environment. This is one of the reasons winter radon levels tend to be higher, on top of the closed-house effect.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "After Mitigation and Post-Fix Questions", "question": "We just got mitigation installed. My Airthings still shows 3.8. Did it not work?", "answer": "Give it time. A mitigation system immediately changes the pressure dynamics under your slab, but your Airthings long-term average built up over months of high readings. That average will take 30-90 days to re-average down as new low readings replace the older high ones. Watch the daily and weekly readings - they should start dropping within days of installation. The long-term average will follow. Don't judge the system's success on the first week.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "After Mitigation and Post-Fix Questions", "question": "My radon went from 6.0 to 0.8 after mitigation. Is that normal?", "answer": "Yes, that's a typical and excellent result. A well-installed sub-slab depressurization system routinely brings homes from 4-10+ pCi/L down to under 2.0 pCi/L, and often under 1.0 pCi/L. A drop from 6.0 to 0.8 is exactly what the system is designed to do. Continue monitoring to confirm the levels stay low, especially through the first full winter.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "After Mitigation and Post-Fix Questions", "question": "My radon was mitigated last year and now it's creeping back up. Did the system fail?", "answer": "It's possible, but don't jump to that conclusion first. Check that the system is running - the fan should be on and the U-tube manometer (if installed) should show a differential. Check that no new entry points were opened (new sump pit, cracked floor). Seasonal changes can also affect readings. If the system is clearly running and your readings are back above 4.0, have the contractor come back for a diagnostic check - the system may need adjustment or an additional suction point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "After Mitigation and Post-Fix Questions", "question": "My radon went from 5.5 to 3.2 after mitigation. Should I be happy with that?", "answer": "You're in a better place than before, but 3.2 pCi/L is still in the range where the EPA says consider mitigation - and you've already paid for a system. A well-functioning system should typically bring a home well below 2.0 pCi/L. Talk to your contractor about whether the system needs adjustment, an additional suction point, or whether a diagnostic is in order. Don't settle for 3.2 when the goal should be under 2.0.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "After Mitigation and Post-Fix Questions", "question": "My radon is at 4.8 post-mitigation. Is that normal?", "answer": "That's not an ideal result. Post-mitigation levels above 4.0 mean the system hasn't brought you to the EPA's action level, which is the minimum standard for success. Contact your contractor - most reputable mitigation contractors warranty their work and will come back to diagnose and adjust. Common fixes include adding suction points, increasing fan capacity, or sealing additional entry points.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "After Mitigation and Post-Fix Questions", "question": "My mitigation system fan is running but my radon is still 6.0. What's wrong?", "answer": "Several things could be happening: the suction point may not be reaching all areas under the slab (a common issue in older homes with rubble-fill sub-slabs), there may be entry points the system isn't addressing (sump pit, wall cracks), or the fan may be undersized for the job. Have your contractor come back for a diagnostic. Smoke testing or pressure field extension testing can identify why the system isn't achieving the expected reduction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "After Mitigation and Post-Fix Questions", "question": "After mitigation, do I still need to monitor radon?", "answer": "Yes, and most contractors will tell you the same. Mitigation systems can develop issues over time - fans fail, connections loosen, new cracks develop. Keeping a monitor running means you'll know if the system stops working before the problem has been going on for months. An annual check of your monitor's long-term average is a good minimum habit after mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "After Mitigation and Post-Fix Questions", "question": "Is my radon promised to stay low after mitigation?", "answer": "No, and any contractor who promises a promised outcome for all time is overselling. Mitigation systems work by maintaining a pressure differential that draws radon away from the house - as long as the fan is running and the system is intact, they're effective. But fans can fail, systems can be damaged, and conditions can change. That's why ongoing monitoring matters. The vast majority of properly installed systems continue to work well for many years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-readings-spikes-interpretation-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Radon and Real Estate Questions", "question": "My house is under contract and the buyer's test came back at 5.5 pCi/L. My Airthings shows 3.0. Why the discrepancy?", "answer": "A few possible reasons: the buyer's test was a 48-hour charcoal test, which is more sensitive to short-term conditions than your long-term average. If the test period coincided with low barometric pressure, a storm, or winter conditions, it could read higher than your steady-state average. Conversely, your Airthings long-term average may be pulling down spikes. It's also possible the charcoal test is simply the more accurate reflection of conditions in your home. The buyer's test result is what the contract will be based on, so take it seriously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Radon and Real Estate Questions", "question": "I just bought a house and the previous owner's radon test showed 3.5. Should I run my own test?", "answer": "Yes, absolutely. The previous test was done at a point in time - possibly under different seasonal conditions, with different residents and ventilation habits, and possibly years ago. Run your own test now that you're in the home and living in it normally. 3.5 pCi/L is below the action threshold but worth knowing for certain with fresh data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Radon and Real Estate Questions", "question": "My real estate agent says a radon reading of 3.9 is fine and won't affect the sale. Is that true?", "answer": "Legally and contractually, 3.9 pCi/L is under the EPA's formal action threshold of 4.0, so a seller isn't obligated to mitigate. But a buyer who knows about it - and they should, since it must be disclosed - may still factor it into negotiations. The practical difference between 3.9 and 4.1 from a health standpoint is essentially nothing. Whether it affects the sale depends on the buyer and what they're comfortable with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Radon and Real Estate Questions", "question": "My Airthings long-term average has been under 2.0 for a year but during the buyer's 48-hour test it spiked to 4.5. What do I tell the buyer?", "answer": "Tell them the truth, including both data points. Explain that your Airthings long-term average reflects a full year of data under normal living conditions, and that the 48-hour test caught a period of high readings - possibly weather-related. Share your long-term Airthings data along with the test result. Some buyers will find that reassuring; others will want mitigation regardless. Being transparent protects you legally and builds trust in the transaction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Radon and Real Estate Questions", "question": "A home I'm buying tested at 8.0 pCi/L. The seller wants to credit me instead of mitigating. Is that smart?", "answer": "A credit is reasonable only if you actually follow through and get the mitigation done. If you take the credit and never address the radon, you're the one living with 8.0 pCi/L. Mitigation should be a condition of the sale or completed before closing - not just a credit that may or may not be used. Make sure the credit is sufficient to cover the actual cost of mitigation, including any diagnostic work.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Radon Source and Entry Questions", "question": "Where exactly is the radon coming from in my house?", "answer": "Radon comes from the natural decay of uranium in the soil and rock beneath your home. As it forms, it moves as a gas through soil pores and enters your home through openings at or below grade - floor cracks, wall-floor joints, pipe penetrations, sump pits, and even directly through porous concrete. It's not coming from your building materials (in most cases) or from your water supply (unless you're on well water, where waterborne radon can be a factor in some cases).", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Radon Source and Entry Questions", "question": "My house is on a slab. Where would the radon come from?", "answer": "Slab-on-grade homes get radon the same way crawl space and basement homes do - through the soil contact zone. Radon seeps up through the soil under the slab and enters through cracks in the concrete, pipe penetrations, and the joint between the slab and foundation walls. Slab homes can have high radon, and they're just as mitigatable as homes with basements.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Radon Source and Entry Questions", "question": "My crawl space is dirt. Is that a radon risk?", "answer": "Yes, a dirt-floor crawl space is essentially an open pathway for soil gas - including radon - to enter the home. The soil is directly exposed, and any gap between the crawl space and the living area allows radon to migrate upward. Encapsulating a crawl space and adding active ventilation or sub-membrane depressurization is an effective mitigation approach for these homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Radon Source and Entry Questions", "question": "Can radon come from my well water?", "answer": "Yes, in some cases. Well water drawn from underground aquifers in radon-rich geology can contain dissolved radon, which is released into the air when the water is used (showering, running the faucet). This is more common in certain areas with specific geology. If you're on well water and have elevated radon, testing the water is worth adding to your evaluation. Municipal water supplies generally don't contribute meaningful radon because radon degasses during treatment and transport.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Radon Source and Entry Questions", "question": "My neighbor has a high-radon house. Does that mean mine is high too?", "answer": "Not necessarily. Radon varies house by house, even on the same block. Your neighbor's geology, foundation type, sub-slab conditions, and HVAC setup all affect their radon independently of yours. The only way to know your radon level is to test your house. Proximity to a high-radon neighbor is a reason to test, not a reason to assume.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Radon Source and Entry Questions", "question": "Can radon come through the walls?", "answer": "Yes. Radon can enter through cracks in basement walls, the joint between the floor and walls (the cold joint), pipe penetrations through walls, and directly through porous concrete block or stone. Block foundations are particularly permeable because the hollow cores of the blocks can fill with soil gas and transfer it through the wall. A good mitigation system addresses both floor and wall pathways.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Radon Source and Entry Questions", "question": "My house has poured concrete walls and a poured concrete slab. I assumed that would keep radon out. Why is it still high?", "answer": "Poured concrete is denser than block, but it still has cracks, shrinkage gaps, and penetrations. The most common radon entry point in poured-concrete homes is the cold joint - the gap that forms between the floor slab and the wall where they were poured at different times. Poured concrete homes absolutely can have high radon, and they mitigate just as well as any other construction type.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My Airthings is in my home office which is on the main floor above a crawl space. Should I move it to the crawl space?", "answer": "Don't put it in the crawl space - that's not a livable area and isn't where health risk is measured. The relevant question is whether radon from the crawl space is migrating into your office. If your office is directly above the crawl space with only subfloor between them, it may be worth testing the office specifically in addition to the most-used lower level. Place the monitor in the space where you spend the most time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My house has both a basement and a crawl space. Do I need to test both?", "answer": "Testing the lowest livable level (your basement) is the priority. If you spend time in the basement, that reading drives your mitigation decision. The crawl space itself isn't occupied, but if there are areas above it where people spend time, you may want to test those spaces too. Radon from an unsealed crawl space can migrate to upper floors.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I've been tracking my radon for 6 months and the average has barely changed. Is that good?", "answer": "Stability over six months is generally a good sign that you understand your baseline. If that stable average is under 2.0 pCi/L, you're in good shape and can relax your monitoring frequency. If it's been stable at 3.5 pCi/L for six months, that stability is telling you this is your real baseline - not a temporary spike - and the consideration of mitigation becomes more informed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My app shows a graph with radon spikes every Tuesday. That's so specific. Why would that happen?", "answer": "This is more likely a coincidence than a Tuesday effect, but think about what's different on Tuesdays in your house. Is there a particular cleaning routine that opens windows or runs exhaust fans? Does the HVAC get serviced? Does the weather in your area happen to follow a pattern? If you can identify something that consistently changes on Tuesdays, that's your explanation. Otherwise, it may just be that Tuesday's weather patterns have coincidentally been different.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My monitor reading was normal, then I ran a diagnostic program on it and now it shows different numbers. Did I reset the average?", "answer": "Some devices allow you to reset or recalibrate, which would restart the averaging period. If you ran a firmware update or a device reset, check whether the long-term average was preserved or started over. Most Airthings devices preserve historical data through firmware updates but can be reset to factory settings. Check your device's app history to see whether older readings are still there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon is 4.2 pCi/L but only in one corner of the basement near the sump. Is that a localized problem or a whole-house problem?", "answer": "If the monitor is near the sump pit, the reading is heavily influenced by the local high-radon environment of an open sump. That's a real reading but not representative of the whole basement. Move the monitor to the center of the basement, away from the sump pit, and see what the average looks like from a more neutral location. The sump pit is still a problem to address - but your whole-home average may be lower than the corner reading suggests.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon spiked when my spouse started working from home and is now in the basement all day. Does more time in the basement increase radon?", "answer": "More occupancy in the basement doesn't increase radon levels, but it does increase your family's exposure if levels are elevated. More time at 4.0 pCi/L means more cumulative exposure than an hour a day at 4.0 pCi/L. If your spouse is now spending a significant portion of their day in the basement, the risk calculation shifts and mitigation becomes a higher priority even at levels that might have been tolerable when the space was rarely used.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon monitor shows a high reading and I have asthma. Should I be more worried?", "answer": "Radon's known health risk is lung cancer from long-term cumulative exposure - not an aggravation of asthma or other respiratory conditions in the short term. Even so, anyone with compromised lung health has more reason to keep their air quality as good as possible, and reducing radon is a reasonable part of that. Talk to your doctor about the specific risk picture for your situation. From a radon standpoint, the response is the same as for anyone else: if levels are above 4.0, mitigate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon monitor is showing a reading but the number keeps changing every time I refresh the app. Is that a bug?", "answer": "Most consumer monitor apps update readings on an interval - some show hourly readings, others show more frequent updates. If the number changes every time you refresh, you're likely seeing the most recent measurement update. That's normal and expected. Radon levels fluctuate continuously, so a number that changes with each refresh is the monitor doing its job. The long-term average in the app should be much more stable than the current reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I turned off my mitigation fan for a week while I was waiting for a part. My radon jumped to 9 pCi/L. Is my system responsible for keeping it that low normally?", "answer": "Yes, exactly. The spike to 9 pCi/L when the fan was off confirms that your mitigation system is doing significant work to keep levels low. That's actually reassuring - it means the system is working properly and that when the fan is running, it's effectively controlling the radon source. Get the part replaced and the fan back online, and your levels should return to their post-mitigation baseline within a few days to a week.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I measured radon in my garage and it's 7 pCi/L. Does that mean the house is also high?", "answer": "The garage is typically not considered a living space for EPA action purposes, but if your garage is attached and shares air with the house - through an interior door, shared HVAC, or unsealed penetrations - garage radon can migrate into living areas. High garage radon does suggest significant radon potential in the underlying soil. Test inside the home proper, particularly in the basement or lowest livable level, and use that reading for your mitigation decision.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon is always highest when my windows are open on one side of the house but not the other. That seems backwards.", "answer": "It's not backwards - it's airflow physics. If you're creating a pressure difference by opening windows on one side but not the other, you can create a wind-driven air current through the house. Depending on how that current moves, it can either dilute or concentrate radon in particular zones. Opening windows on both sides more evenly tends to create better cross-ventilation. But again, open windows aren't a solution - they're a temporary and unreliable variable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My kids spend a lot of time in a finished basement playroom. Our radon is 3.5. Should I act?", "answer": "Yes, I would. At 3.5 pCi/L, you're below the formal action threshold, but kids in a basement playroom represent significant cumulative exposure time - probably more time than most adults spend in a basement. Children have more years ahead of them for that cumulative exposure to accumulate, which is exactly the kind of situation where the EPA's \"consider mitigation between 2.0 and 4.0\" guidance applies strongly. Mitigation at 3.5 when children are regularly in that space is a defensible and reasonable decision.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon test during a power outage came back low. Is that accurate?", "answer": "A power outage could affect radon readings if it took down your HVAC system, fans, or any mechanicals that normally influence air pressure. In some homes, loss of HVAC actually lets radon levels change in unexpected ways - without the furnace drawing air, the stack effect changes. A reading taken during a power outage is valid data but may not represent your normal conditions. Let your monitor re-average for 30+ days under normal operation before drawing conclusions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "Can radon detectors go off like smoke detectors?", "answer": "No. Consumer radon monitors don't have alarm sounds that trigger at a threshold the way smoke detectors do. They display readings on a screen or app and may use color coding to indicate concern levels, but they won't wake you up with an alarm. Some newer smart home integrations allow notification-based alerts when readings exceed a threshold, but there's no audible emergency alert in the traditional smoke-alarm sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon is 2.0 exactly. Is that the line between okay and not okay?", "answer": "There's no hard biological line - radon risk is a gradient, not a cliff. The EPA uses 2.0 pCi/L as the starting point of the \"consider mitigation\" recommendation because risk at that level, while lower than at 4.0, is still meaningfully elevated compared to levels closer to outdoor background. At 2.0, you're not in the action zone, but you're not at zero risk either. Whether you act on 2.0 pCi/L is a personal decision that depends on your family situation and risk tolerance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon test came back in the mail at 4.3 pCi/L. How reliable is a mailed charcoal canister test?", "answer": "Charcoal canister tests analyzed by certified labs are a reliable and widely accepted method for radon testing. The test itself is sensitive to conditions - placement location, whether windows were closed during the test period, test duration - but when conducted correctly (closed-house conditions, in the lowest livable level, 48-96 hours), the results are considered valid. At 4.3 pCi/L from a properly conducted test, the result is meaningful and the EPA's action recommendation applies.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I did two charcoal tests at the same time and got different results. Which one is right?", "answer": "Radon isn't perfectly uniform in a space, and even two canisters placed a few feet apart may collect slightly different samples. A 10-20% difference between two canisters placed at the same time and location is within normal variability. Average the two results - that gives you a better estimate than either one alone. If the difference is dramatic (one shows 1.0 and the other shows 6.0), the placement locations were significantly different, or one of the canisters was compromised.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon test results came back in a format I don't understand. It says \"WL\" not pCi/L. What does that mean?", "answer": "WL stands for Working Level - it's an older unit of radon measurement still used in some professional contexts. One Working Level (1 WL) corresponds to approximately 200 pCi/L of radon in equilibrium with its decay products. Most consumer and residential radon testing uses pCi/L, which is the standard unit for EPA guidance. If your result is in WL, multiply by 200 to get the rough pCi/L equivalent - but contact the lab if you're uncertain.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "What does \"picocuries per liter\" actually mean? Is it radiation?", "answer": "Yes, pCi/L measures radioactivity - specifically, it tells you how many radioactive decays are happening per liter of air per second from radon and its decay products. A picocurie is one trillionth of a curie, which is a standard unit of radioactivity. The radon itself isn't what causes cancer - it's the decay products (polonium, bismuth, lead) that lodge in lung tissue and emit alpha radiation that damages cells over years of exposure. The number in pCi/L tells you how much of this decay process is happening in the air you're breathing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My friend said radon only matters if you smoke. Is that true?", "answer": "No. Radon causes lung cancer in non-smokers too - it's the leading cause of lung cancer among people who have never smoked. However, the combination of radon exposure and smoking does dramatically multiply the risk. Smokers exposed to elevated radon are at substantially higher risk than either smokers in low-radon homes or non-smokers in high-radon homes. But non-smokers should not dismiss radon as \"only a smoker's problem.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "If I stop smoking and fix my radon, do my risks go down?", "answer": "Yes, substantially. Both smoking cessation and radon mitigation reduce lung cancer risk significantly. The risk doesn't go to zero overnight - past exposure has already occurred - but the cumulative risk going forward drops substantially when you remove the ongoing exposures. Both actions together are among the most impactful things you can do for lung health.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon was 1.8 before we converted the basement from storage to a living space. Now it's 3.5. Why?", "answer": "The conversion itself may not have changed the underlying radon levels - what changed is that you're now spending time in a space where 3.5 pCi/L exists, and that space may be more sealed than it was when it was a storage area with gaps and vents. The radon reading may also genuinely be higher due to better sealing during the conversion. Either way, the relevant reading is the one in the now-livable space, and 3.5 pCi/L in a space where your family spends significant time is worth discussing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "Is there a way to test radon without buying a kit or a monitor?", "answer": "Short-term charcoal test kits are widely available at hardware stores and online for relatively low cost, and many state radon programs offer them free or at reduced cost. You don't need an expensive electronic monitor to get a valid initial radon measurement. The charcoal kit is a perfectly legitimate starting point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My state health department sent me a free radon test kit. Is it as good as a paid one?", "answer": "Yes. State radon programs distribute charcoal canisters from certified labs that meet the same quality standards as commercial kits. The analysis is done at accredited labs regardless of whether you paid for the kit yourself or received it through a state program. Use it exactly as directed, and the result will be valid.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I found an old radon test kit in my garage from 10 years ago. Can I still use it?", "answer": "No. Charcoal canisters have a shelf life - the activated charcoal degrades and the kit may no longer produce accurate results after a few years. Check the expiration date. Most kits are good for 1-2 years from manufacture. An expired kit may give you a result, but it's not reliable. Get a fresh kit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "What's the most accurate way to test radon in my home?", "answer": "A long-term alpha track detector run for 90 days or longer in the lowest livable level, under normal living conditions (windows closed in winter, normal HVAC use), analyzed by a certified lab, is considered one of the most accurate measures of your actual radon exposure. It integrates the full range of seasonal and daily variation rather than catching a snapshot. A 48-hour charcoal test is faster but more sensitive to short-term conditions. For a definitive picture of your risk, a 90-day test is the gold standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "How do I know if a radon testing company or contractor is certified?", "answer": "In Illinois and most states, radon professionals are required to be licensed through the state or certified through a national program like NRPP (National Radon Proficiency Program) or NRSB (National Radon Safety Board). Ask any contractor or tester for their license number and verify it with the state. Certified professionals follow established protocols for testing placement, duration, and reporting that produce defensible, accurate results.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My contractor said my radon is 4.2 but my monitor says 3.8. Should I believe the contractor's test?", "answer": "Both numbers are close enough that the difference is within normal measurement variability. The contractor likely used a 48-hour short-term test, which can read higher or lower than your long-term monitor average depending on conditions during those 48 hours. Neither reading is necessarily wrong. At 4.2 pCi/L, the EPA's action recommendation applies. At 3.8, you're just under but solidly in the consideration zone. The actionable answer is the same either way.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I've been monitoring for 8 months and my long-term average is creeping up slowly from 2.5 to 3.8. Should I worry?", "answer": "A slow upward trend over 8 months is worth paying attention to. It suggests something is changing - the season, the home, or both. If you're approaching 4.0 and the trend hasn't reversed, it's reasonable to start thinking about mitigation before you cross the threshold. At 3.8 with an upward trend, you may already be at or above 4.0 during your highest-exposure winter weeks.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My husband says radon monitoring is a waste of money and only contractors care about it. Is he right?", "answer": "He's not right about this one. Radon is a real and documented health risk - the EPA, the Surgeon General, and major health agencies all recommend testing because radon is the second leading cause of lung cancer in the United States. Monitoring is the only way to know what you're actually breathing. The risk is invisible, odorless, and tasteless. A monitor or a test kit is inexpensive relative to the information it provides.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I'm a builder and I'm trying to understand why two identical homes I built next to each other have very different radon levels. Is that possible?", "answer": "Yes, very much so. The local geology can vary within a single lot - the specific soil composition, the presence of fractures or permeable zones, and the depth to uranium-bearing rock all affect how much radon is produced and how easily it migrates. Two homes with identical construction can have radon levels that differ by a factor of 5 or more based purely on what's directly under each foundation. This is why radon testing is done per-home, not per-neighborhood.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon monitor has been running for 3 years without any maintenance. Is that okay?", "answer": "For most consumer monitors, 3 years of continuous operation is within the expected service life, and no routine maintenance is needed beyond keeping the device powered and avoiding physical damage. However, no sensor runs perfectly forever - if your readings start behaving erratically or you're uncertain about accuracy, running a certified test kit alongside the monitor is a good way to verify it's still performing correctly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon has been at 5.5 pCi/L for the entire winter. Is that bad enough to move out?", "answer": "You don't need to move out. Radon at 5.5 pCi/L is above the EPA action level, and the cumulative risk from long-term exposure at that level is real. But the risk is cumulative over years, not a crisis for the next few weeks. Schedule mitigation, get it installed, and watch your levels come down. Moving out is not necessary or proportionate to the situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon spiked to 11 and I got a headache that same day. Could the radon have caused it?", "answer": "No. Radon does not cause headaches, sore throats, fatigue, dizziness, or any acute symptoms. It is a long-term lung-cancer risk from cumulative radiation exposure - typically developing over years or decades. Your headache has a different cause. The coincidence of timing is just that - coincidence. If you're having persistent unexplained symptoms, see your doctor, but radon isn't the explanation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I'm 75 years old and just found out my radon is 6.0. Is it too late to bother mitigating?", "answer": "No, it's not too late. Radon risk is cumulative - every year of exposure matters. Reducing your radon going forward still meaningfully reduces your ongoing risk, even if you've had some years of exposure behind you. There's no age at which the math says \"don't bother.\" Get it fixed and breathe easier, literally.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My teenage daughter is very worried about our radon level of 4.2. What do I tell her?", "answer": "Tell her she's right to take it seriously, and that you're going to fix it. Radon at 4.2 pCi/L is above the EPA's action level, mitigation is effective, and the problem is solvable. The risk is real but it's also manageable - and the fact that you know about it and can address it puts you in a much better position than families who don't test at all. Schedule mitigation and show her the monitor coming down afterward. That's a good outcome and a good lesson.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "We just had a baby and now I'm worried about all the radon. Our level is 2.8. What should we do?", "answer": "At 2.8 pCi/L, you're in the EPA's consideration range - below the action threshold but above 2.0 where the EPA says the risk is worth thinking about. Having a baby in the home is a reasonable factor in that decision - a child who grows up in the house has more cumulative years of exposure ahead than an adult. Many families in your position choose to mitigate for peace of mind. It's a reasonable call, and we're happy to talk through what that would involve.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "We have a dog that sleeps in the basement. Should I worry about the dog being exposed to radon?", "answer": "It's a thoughtful question. Dogs and other pets can be affected by long-term radon exposure - studies have documented elevated lung cancer rates in dogs in high-radon environments. Even so, the primary reason to address radon is for the health of the people in the home. If your radon levels are above the EPA threshold, fixing it protects everyone in the house - including the dog.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "Does radon affect different people differently? Like, is my kid more at risk than me?", "answer": "The same radon level represents different risk depending on how much time is spent in the space, how long the person lives there, and whether they smoke. Children do have more years ahead of them in which cumulative exposure can accumulate, which is one reason the \"consider mitigation\" guidance between 2.0 and 4.0 pCi/L applies more urgently in homes where children are regularly in the basement. There's no known genetic difference in how radon affects different individuals at the cellular level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "Can I test radon myself or do I need to hire someone?", "answer": "You can absolutely test yourself. Consumer charcoal canister test kits are widely available at hardware stores and online, come with clear instructions, and are analyzed by certified labs. The result is valid when the test is conducted correctly. For a real estate transaction or post-mitigation verification, some buyers or states may require a licensed professional to conduct the test - but for general home monitoring, a DIY kit is perfectly legitimate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "What's the difference between a short-term and long-term radon test kit?", "answer": "A short-term charcoal canister test runs for 48-96 hours and is good for a quick snapshot, especially for real estate transactions. A long-term alpha track detector runs for 90 days or more and produces a result that reflects seasonal and daily variation - a much more representative picture of your real exposure. For general home health, the long-term test is more informative. For real estate, a 48-hour test is the standard because there isn't time to do a long-term test in a transaction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My long-term alpha track test came back at 3.6 pCi/L. My Airthings says 4.1. Which is more accurate?", "answer": "Both are measurement estimates with some uncertainty. A well-conducted 90-day alpha track test is considered a reliable gold standard because it integrates over the full period and isn't affected by daily fluctuations. The Airthings long-term average is a continuous reading but has its own sensor variability. The gap between 3.6 and 4.1 is within a reasonable range of variability between measurement methods. Either way, you're straddling the 4.0 threshold, and the decision about mitigation is essentially the same.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon jumped after we put weatherstripping on all the doors. Does that make sense?", "answer": "Yes. Better weatherstripping reduces air infiltration, which means less fresh air diluting the basement. This is the same mechanism as insulation upgrades and new window installations - improved sealing is great for energy efficiency but can modestly increase radon by reducing passive ventilation. The fix for this is not to leave doors drafty; it's to mitigate the source so that tight sealing doesn't create a radon concentration problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon reading went down after my HVAC was serviced. Is that connected?", "answer": "Possibly. HVAC servicing sometimes adjusts airflow, fan speeds, or duct balancing - any of which could change how air is circulating in the basement. Some HVAC configurations create positive pressure in the basement (pushing radon out), while others create negative pressure (drawing radon in). If servicing adjusted that balance, a change in radon readings is plausible. Worth noting and watching whether it holds.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon is 5.0. What's the typical radon level after a mitigation system is installed?", "answer": "A well-installed sub-slab depressurization system in a home starting at 5.0 pCi/L will typically achieve post-mitigation levels of 0.5 to 1.5 pCi/L in most homes. The result depends on the specific sub-slab conditions, the foundation type, and how many suction points are needed. Most reputable contractors aim to get below 2.0 pCi/L at minimum, and many achieve results under 1.0 pCi/L. If you're staying above 2.0 after a system is installed, the system needs adjustment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon mitigation pipe is outside and it froze this winter. Did that affect my radon readings?", "answer": "If the mitigation fan iced over or the pipe was blocked, it could affect system performance and radon readings temporarily. Most well-designed systems are installed so the exhaust outlet is positioned to resist ice accumulation, but it can happen in extreme cold. Check whether the fan is running, listen for normal operation, and if you have a U-tube manometer on the pipe, confirm it's showing normal differential. If in doubt, call your contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon mitigation company said they got my home to 0.4 pCi/L. Is that a great result?", "answer": "Yes, 0.4 pCi/L is essentially outdoor background level - that's an excellent result. It means the system is very effectively drawing radon away from the sub-slab environment. Keep the fan running and continue monitoring periodically, but a result at 0.4 pCi/L is as good as it gets.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "How do I know if my mitigation fan is still working?", "answer": "Most mitigation systems include a visual indicator - either a U-tube manometer (a clear tube with liquid that shows a differential when the fan is running) or an audible check (you can hear the fan). Some systems have alarm indicators that signal fan failure. Check your system quarterly. If you can't tell by looking or listening, a radon tester or your installing contractor can verify the system is functioning.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon monitor shows a big spike that started exactly when I installed the mitigation system. Should I be worried?", "answer": "This can happen temporarily during installation - when the contractor drills through the slab and opens up the sub-slab environment during the installation process, it can cause a temporary spike. This is normal and expected. Once the system is running with the fan on, levels should drop. Let the system run for at least 30 days and watch your averages. If levels are still high after a month, contact the contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "Should I get a new radon test if I bought a used monitor from someone else?", "answer": "Used monitors may have calibration drift, especially if they weren't stored properly or were used in a high-radon environment for a long time. Before trusting a used monitor for decisions, I'd recommend running a certified charcoal canister test alongside it for 48 hours and comparing. If the two are reasonably close, the used monitor is probably still working. If they're far apart, don't rely on the used device without getting it checked.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My monitor shows radon going up when I cook on the stove. Is that possible?", "answer": "Unlikely. Cooking on a stove doesn't directly produce radon or affect sub-slab pressure in a meaningful way. However, if your range hood is running while you cook, it can create negative pressure in the kitchen - which is connected to the rest of the house. In homes where radon migrates to upper floors, this could theoretically affect readings. More likely, the timing is coincidental. A kitchen stove is not a radon source.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon monitor reads high whenever my dryer is running. Is the dryer pulling in radon?", "answer": "Yes, this is a real and documented effect. A dryer vented to the outside exhausts a large volume of air, creating negative pressure inside the house. That pressure differential can draw soil gas in through foundation gaps. If you consistently see higher readings when the dryer runs, that's the mechanism. A mitigation system counters this by creating a stronger, competing pressure differential under the slab - so the dryer's suction draws from the house rather than the sub-slab environment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "Can anything in my house produce radon that isn't from the soil?", "answer": "Certain building materials - particularly some imported granite countertops, some types of brick, and certain fly-ash concrete - can emit radon, but at very low levels that rarely approach EPA action thresholds. The overwhelming majority of residential radon comes from the soil and sub-slab environment. If you have very high radon in a home with excellent sub-slab sealing, building materials are worth investigating, but this is an uncommon scenario.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I tested radon in my attic and it was 0.1 pCi/L. Does that tell me anything about the basement?", "answer": "Attic radon is nearly always at or below outdoor background levels - radon dilutes massively as it rises through a building, and attics typically have good ventilation. The attic reading doesn't predict the basement reading. Test the basement directly; that's the only way to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon monitor app stopped showing new readings for a week but then started again. Is the data for that week missing?", "answer": "Most monitors store readings internally even when not syncing to the app. When connectivity is restored, the device should sync the missing week's data. Check the app's historical graph - if the gap week is now filled in, the data was recovered. If there's a visible gap in the historical data, those readings may be lost, but the monitor's ongoing average may still have incorporated them internally.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I've read that some areas have naturally zero radon. Is that true?", "answer": "No area has truly zero radon. All soil contains at least trace amounts of uranium and its decay products, so radon is produced everywhere. Some areas - particularly coastal areas with sandy soils and good ventilation - have very low average radon levels and most homes test below 2.0 pCi/L. But \"low average\" for an area doesn't mean any individual home is zero. Local geology, foundation type, and home construction matter more than regional averages.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon was high but my home inspector said it wasn't their concern. Is that right?", "answer": "Home inspectors vary widely in how they approach radon. Some conduct radon tests as part of their service; others don't. The EPA and most state radon programs recommend testing every home, especially at the time of purchase. If your inspector didn't test or didn't mention radon, that's not unusual - but it means you need to take care of it yourself. It's not something to leave as an unknown.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I got a radon test done by a real estate company and I'm worried they had a conflict of interest since they wanted to sell the house. How do I know the test was done right?", "answer": "Certified radon testers follow protocols that include placement rules, closed-house conditions, and tamper-evident documentation. If the test was conducted by a state-licensed or NRPP/NRSB-certified professional and the result is documented on a certified lab report, the result is defensible. If you have concerns about the test conditions (window left open, wrong placement, shortened duration), you can request documentation of how the test was conducted or run your own independent test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "Is there a type of home that is most likely to have high radon?", "answer": "Homes with basements or crawl spaces in direct soil contact, located in high-uranium geology (much of the Midwest), and built without radon-resistant construction features tend to have the highest radon. Older homes with unfinished, unsealed basement floors and multiple floor-wall gaps are particularly susceptible. Even so, any home - including slab-on-grade - can have elevated radon. The only way to know is to test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My builder said the new house has radon-resistant new construction features. Does that mean I don't need to test?", "answer": "It means radon-resistant features were installed during construction - typically a gravel layer, a plastic sheeting barrier, and a stub of pipe ready for a fan. It's a meaningful head start, but it doesn't warranty low radon. The EPA still recommends testing new homes with RRNC features, because the actual radon outcome depends on local geology and how the features were implemented. Test it and know for certain.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-readings-spikes-interpretation-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "What exactly does a radon mitigation system do?", "answer": "A sub-slab depressurization system - the most common type - installs a pipe through the basement floor or into the crawl space, connecting to the soil or sub-slab void beneath the foundation. A fan creates a slight negative pressure below the slab, drawing radon-laden soil gas away from the house and exhausting it outside above the roofline. By reversing the pressure dynamic, radon no longer has a path into the house. The system runs continuously and is powered by a small fan (similar to a bathroom exhaust fan).", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "Will my neighbors' radon affect my radon readings?", "answer": "No. Radon moves through soil and enters homes through their own specific foundation contact points. Your neighbor's radon doesn't cross into your home's air supply. The geology and soil are shared, but each home's radon level is determined by its own construction and entry pathways. Your neighbor's high radon is a useful reminder to test, but their levels don't predict yours.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I have two kids with asthma. Our radon is 3.2 pCi/L. Should I mitigate?", "answer": "Radon doesn't cause or worsen asthma - it's a lung-cancer risk, not a respiratory irritant. Even so, with kids in the home spending time in the basement and a reading of 3.2 pCi/L, you're in the EPA's consideration zone. The cumulative exposure question for children is real, and many families in your situation choose to mitigate for peace of mind. Talk to your pediatrician about the specific health context, and feel free to give us a call to discuss the mitigation option.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My Airthings just updated its firmware and now the readings look different. Did the update change my data?", "answer": "Firmware updates can sometimes change how Airthings devices calculate and display averages - they occasionally update their algorithms. Airthings generally preserves historical raw data through firmware updates, but the displayed average may shift if the calculation method changed. Check the Airthings support pages for release notes on the update. If you're concerned about accuracy post-update, run a certified test kit alongside the device to verify.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I have a monitor upstairs and one downstairs. The downstairs one is 4.5 and the upstairs one is 0.9. Does mitigation fix both?", "answer": "Mitigation primarily targets the radon source - the sub-slab environment - which is what's driving the 4.5 reading downstairs. When that source is addressed, the radon migrating to the upper floor also drops, so your 0.9 upstairs reading should improve further as well. The basement number drives the system design, and fixing it benefits the whole home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon monitor is in the mechanical room next to my furnace and water heater. Is that a good spot?", "answer": "Not ideal. Mechanical rooms can have unusual airflow, combustion appliance effects, and HVAC intake/exhaust effects that don't represent the rest of the basement. Move the monitor to the area of the basement where people actually spend time - a family room, home office, or common area. That reading is the one relevant to your health.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "If I test radon in my basement and it's fine, does that mean my finished basement will also be fine?", "answer": "Probably, yes - your basement's radon level reflects the conditions in that space. A finished basement in the same space as an unfinished basement will have similar radon levels. What changes with finishing is how much time people spend there, which changes the health risk calculation even if the radon level itself doesn't change.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon is 6.5 pCi/L and I'm trying to decide between mitigation and just monitoring more. Is monitoring an acceptable option?", "answer": "Monitoring more won't change your radon level - it will just give you more data points confirming what you already know. At 6.5 pCi/L, you're well above the EPA action level, and the recommendation is unambiguous: mitigate. Monitoring is appropriate for homes that need more data to make a decision. At 6.5 pCi/L on a confirmed long-term average, you have the data. The next step is a phone call to schedule mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My long-term average just hit 4.0 for the first time. Is there a grace period before I need to act?", "answer": "There's no regulatory grace period - this isn't a legal compliance situation. The EPA's guidance is a health recommendation, not a law. At 4.0 pCi/L, the guidance says it's time to act, but you can reasonably take a few weeks to find a qualified contractor. What I'd avoid is letting it sit for months while telling yourself you'll get to it. The cumulative exposure keeps adding up while you wait.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "What's the EPA's actual action level for radon, and why 4.0 pCi/L?", "answer": "The EPA's action level is 4.0 pCi/L. This threshold was established based on cost-benefit analysis - it represents a level at which the risk is significant enough that mitigation is clearly justified and cost-effective for most homeowners. It's not a biological threshold (there's no level that's \"safe\"), but it's the practical point where the EPA says the benefits of mitigation clearly outweigh the cost. Many other countries and the World Health Organization use lower reference levels (around 2.7 pCi/L), reflecting different policy trade-offs.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "What does \"pCi/L\" stand for and how does it compare to the rest of the world's radon measurement units?", "answer": "pCi/L stands for picocuries per liter, the standard radon measurement unit in the United States. Much of the rest of the world uses Becquerels per cubic meter (Bq/m³). One pCi/L equals approximately 37 Bq/m³. The WHO's reference level of 100 Bq/m³ is equivalent to about 2.7 pCi/L. The EPA's action level of 4.0 pCi/L is approximately 148 Bq/m³. Same physics, different units.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My friend in Canada said her radon limit is lower than mine in the US. Is that true?", "answer": "Yes. Health Canada's guideline is 200 Bq/m³, which is approximately 5.4 pCi/L - actually higher than the EPA's 4.0 pCi/L in practical terms. The WHO recommends 100 Bq/m³ (about 2.7 pCi/L) as a reference level. The EPA is more conservative than Health Canada's official guideline but less conservative than the WHO. All of these are guidelines based on risk-benefit decisions, not absolute biological thresholds.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "If I have a radon problem now, will my kids who grew up in this house be at higher risk?", "answer": "Radon risk accumulates from ongoing exposure. If your kids grew up with elevated radon and are no longer living in the home, their past exposure is fixed - there's nothing to do about what already happened. Their ongoing risk from that exposure is part of their long-term lung health picture. If they're concerned, they should discuss it with a doctor. The actionable thing now is to fix the current home so that any children currently living there don't continue to accumulate exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I've been tracking radon in my home for two years. How do I use that data to make a decision?", "answer": "Look at the long-term average - two years of data is excellent. Check whether the average has been stable, trending up, or trending down. Note the seasonal pattern: what does winter look like versus summer? The number that drives your decision is the long-term average under real closed-house conditions. If that average, over two years of data, is consistently above 4.0 pCi/L, mitigate. If it's been consistently between 2.0 and 4.0, consider your family situation and risk tolerance. If it's been under 2.0, you're in good shape - keep monitoring periodically.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "Are there any home improvements that reliably reduce radon without a full mitigation system?", "answer": "Sealing floor cracks, sealing the sump pit, and improving sub-slab ventilation can reduce radon modestly. Some homeowners see meaningful drops from sealing alone. But sealing is rarely a complete solution because radon enters through multiple pathways that are difficult to fully identify and seal. The EPA and most radon professionals don't recommend sealing alone as a substitute for a mitigation system when levels are at or above 4.0 pCi/L. It can be a useful supplement but not a replacement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I installed a vapor barrier in my crawl space. My radon went from 4.5 to 2.8. Is that a success?", "answer": "That's a meaningful improvement, and the vapor barrier clearly helped. At 2.8 pCi/L, you've moved from the action zone to the consideration zone - that's real progress. Whether you stop there or continue to mitigate further depends on your risk tolerance and how much time is spent in the home. Some homeowners are comfortable at 2.8; others want to get further below 2.0. Either position is reasonable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon spiked during a tornado warning when we had the house sealed tight. Is that connected?", "answer": "Absolutely connected. Tornado warnings bring rapidly dropping barometric pressure - sometimes the most dramatic pressure drops you'll see all year. A sealed-up house combined with an extreme pressure event is a recipe for a significant radon spike. After the storm passes and pressure normalizes, your reading should return to its prior range. This is not a structural change to your home's radon profile.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon monitor shows \"dashes\" instead of a reading. What does that mean?", "answer": "Most radon monitors show dashes during their initial setup period - they're accumulating data before they have enough to display a meaningful reading. Depending on the device, this can last anywhere from a few hours to a couple of days. If your monitor continues showing dashes after a week of operation, check the device manual or contact the manufacturer - it may indicate a sensor issue.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "We live in a split-level home. Where should I put the radon monitor?", "answer": "In a split-level home, the lowest livable level - the level closest to grade or below-grade - is where the monitor belongs. If one portion of the home is partially below grade (which is common in split-levels), that's your priority location. Check which level has the most soil contact and where radon is most likely to accumulate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon is 3.5 and my wife is a two-pack-a-day smoker. Does that change the calculus?", "answer": "Significantly. The combination of smoking and radon exposure is multiplicative, not additive. A smoker at 3.5 pCi/L faces substantially higher lung cancer risk than a non-smoker at the same level. For a household with a heavy smoker, many radon professionals would recommend considering mitigation even below 4.0 pCi/L. Smoking cessation and radon mitigation together represent the most impactful combination of risk reductions available.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon is 4.0 pCi/L and my mom, who is 80, lives in the basement apartment. Does her age matter?", "answer": "Age itself doesn't dramatically change how radon affects the lung at the cellular level, but a person who spends significant time in a below-grade apartment at 4.0 pCi/L has meaningful cumulative exposure going forward. At 80, her risk from years of future exposure is different than a 40-year-old's, but the recommendation to mitigate at 4.0 pCi/L still applies. Fixing it is the right call regardless of her age.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "I'm a renter and my landlord won't test for radon. What are my options?", "answer": "You can test yourself - charcoal canister test kits are inexpensive and available online and at hardware stores. The result is valid regardless of who placed the kit. If your test comes back above the EPA action level, check your state's radon laws - some states have tenant protections related to radon, particularly for multi-family buildings. Illinois has radon-related requirements for certain property types. Knowing your level is the first step, and you can get that without your landlord's cooperation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "Can radon get into my drinking water and hurt me that way?", "answer": "In some areas, radon can be dissolved in well water and released into the air when the water is used. The inhalation pathway is considered the primary risk - the EPA estimates that waterborne radon contributes to lung cancer risk primarily through the air it releases during showering and other water use, not through ingesting it. Municipal water supplies generally don't have significant waterborne radon because of treatment and distribution. If you're on well water in a high-radon area, testing your water is worth adding.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon monitor is in a guest bedroom that we almost never use. Is that a useful location?", "answer": "Not particularly. The EPA's guidance is to place monitors in the lowest livable area where people spend the most time. A rarely used guest bedroom - even if it's on a lower level - doesn't represent your actual exposure. Put the monitor in the basement family room, home office, or wherever family members actually spend time. The health risk calculation is based on where you are, not just what the monitor reads.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "What's the best brand of radon monitor in your opinion?", "answer": "Several brands have good reputations - Airthings, RadonEye, and Ecosense are among the most commonly recommended consumer monitors. For long-term tracking and trend awareness, the Airthings Wave series is popular and well-reviewed. For fast response (useful for seeing real-time effects of changes), some users prefer RadonEye. The \"best\" brand depends on what you're using it for. For a professional or post-mitigation verification standard, a certified lab test is still the gold standard regardless of which consumer monitor you use for day-to-day monitoring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "Why is radon higher in houses than outdoors?", "answer": "Outdoors, radon disperses rapidly into the atmosphere - there's essentially infinite dilution. Inside a home, radon that enters from the soil accumulates in an enclosed space with limited air exchange. The concentration in a closed basement can be orders of magnitude higher than outdoor levels because the house acts as a collection vessel for soil gas that would otherwise dissipate. This is why homes - particularly basements - need to be specifically tested rather than inferring safety from outdoor levels.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "If I get mitigation, will my homeowner's insurance go down?", "answer": "Most homeowner's insurance policies don't adjust premiums based on radon mitigation. Radon isn't typically an insured peril. However, some insurers offering environmental coverage or some specialty green home policies may have provisions. Check with your insurer. The primary benefit of mitigation is health, not insurance savings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My Airthings gives me a \"weekly\" reading and a \"monthly\" reading. Which should I use to make decisions?", "answer": "The monthly or long-term average is the right reference point for decisions. The weekly reading gives you a sense of recent trends - useful for seeing whether conditions are improving or worsening. But a single high week or single low week can be misleading. Use the longest-running average available to you for any decision about mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "Is there any way to tell if my house has radon without testing?", "answer": "No. Radon is colorless, odorless, and tasteless - completely undetectable by human senses. There are no visual signs in the home, no health symptoms that indicate radon exposure in the short term, and no way to infer radon levels from your neighborhood or building type with any reliability. Testing is the only way to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My house tested high for radon, but a friend says radon monitors aren't reliable. Should I get a lab test to confirm?", "answer": "Your friend raises a legitimate point - consumer monitors have more variability than certified lab tests. If you're making a significant decision (mitigation investment, real estate transaction, or very high readings), running a certified charcoal canister test alongside your monitor to confirm is a smart move. If the lab test confirms elevated levels, you have a solid basis for action. If there's a big discrepancy, it's worth understanding why before proceeding.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My long-term radon average is 4.3 pCi/L and I have a home office in the basement where I work 40 hours a week. Is that a significant exposure?", "answer": "Yes. Forty hours per week in a space at 4.3 pCi/L represents substantial cumulative exposure compared to someone who spends minimal time in their basement. This is exactly the kind of situation where the risk calculation is more urgent - the EPA's action guidance applies, and the time-weighted exposure for someone working from a basement office is much higher than for someone who only passes through. Mitigation here is clearly warranted.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "What are the signs that I should call a radon professional immediately?", "answer": "There's no radon emergency that requires a same-day response - radon risk is cumulative, not acute. But you should call a professional promptly if: your long-term average is consistently above 4.0 pCi/L; your post-mitigation levels are not coming down as expected; your mitigation fan appears to have failed; or you're in a real estate transaction with a radon contingency. There's no need to panic, but don't delay when any of these situations apply.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "What questions should I ask a radon mitigation contractor before hiring them?", "answer": "Ask whether they're licensed in Illinois (the state requires licensing for radon mitigation contractors). Ask for a written estimate with details on what's included. Ask what result they typically achieve in homes similar to yours. Ask what their warranty or callback policy is if levels don't come down adequately. Ask whether they'll provide documentation of the post-mitigation test result. A professional, straightforward contractor will have clear answers to all of these.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Miscellaneous and Nuanced Questions", "question": "My radon is 8.0 and I've been in the house for 20 years. What do I do now?", "answer": "Fix it now. Whatever exposure has occurred over 20 years can't be undone, but the best thing you can do going forward is eliminate the ongoing source. Mitigate, get your levels down, and keep monitoring. If you have health concerns about past exposure, that's a conversation for your doctor. The radon professionals can solve the ongoing problem - the past exposure is behind you and worrying about it won't change it. The future exposure is the part you can control.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0236", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon monitor is three years old and the reading seems higher than I remember. Could the sensor be drifting high as it ages?", "answer": "Some sensors do drift over time, though manufacturers typically design for stable performance over several years. If you have a nagging suspicion that your monitor is reading high relative to what you've experienced historically, run a certified charcoal canister test alongside it for 48 hours and compare. That'll tell you quickly whether the sensor has drifted or whether your radon has genuinely crept upward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0237", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon went from 2.0 to 6.0 after I added spray foam insulation in the rim joists. Is that the cause?", "answer": "Very likely. Spray foam in the rim joists dramatically reduces air infiltration at the top of the foundation wall - which was previously one of the main paths for fresh outdoor air to dilute basement radon. Sealing those joists is excellent for energy efficiency but can concentrate radon significantly. You've created a tighter envelope and now the radon has fewer escape routes. Mitigation addresses this by dealing with the source, not just the dilution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0238", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My monitor was off for two weeks while I was waiting for a replacement charger. Does that gap mess up my long-term average?", "answer": "A two-week gap in monitoring means those two weeks weren't captured in the average. Your long-term average before the gap is still valid data. When you power the monitor back on, it will start accumulating new readings and the new average will build from there. The gap doesn't corrupt the past data - it just means your average will take a bit longer to be representative of the full period.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0239", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "I moved my monitor from a shelf to the floor to make room for something. Now it reads higher. Should I move it back?", "answer": "Yes, move it back. Radon concentrates toward the floor because it's heavier than air. A floor-level reading will consistently read higher than a reading at breathing height (around 20 inches or more off the floor). The EPA recommends placing monitors away from the floor for exactly this reason - you want the reading that represents what the occupants of the space are actually breathing, not the heaviest concentration pooling at ankle level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0240", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "I'm trying to understand my Airthings data export. There are hundreds of hourly readings. What should I look at?", "answer": "For a decision about mitigation, look at the long-term average displayed in the app - that's the number that's been calculated across all those hours. If you want to dig into the raw data, average the readings from the past 90 days under normal closed-house conditions (exclude weeks with open windows or unusual activity). Also look at the nighttime pattern (typically 2am-6am) to see how high spikes get, and at the overall trend line to see whether levels are stable, rising, or falling.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0241", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon went up when I switched my HVAC from heating to cooling mode in the spring. Why?", "answer": "Switching HVAC modes can change airflow and pressure dynamics in the home. Heating mode typically uses a furnace that pulls combustion air, creating basement depressurization. Cooling mode uses the central air handler, which may create different pressure patterns. It's also possible the change coincided with the windows being kept closed more tightly for air conditioning after a period of spring ventilation. The combination of factors at seasonal transitions can move readings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0242", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon went up the same week we got a lot of construction work done on the street outside. Could road construction cause radon?", "answer": "Road construction itself doesn't produce radon, but heavy equipment running nearby can create vibrations that slightly affect soil compaction and gas movement. A more likely explanation is that the timing coincided with weather changes, or that dust and debris led you to close windows more than usual. Street-level construction is not a recognized cause of household radon increases.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0243", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon monitor reads much higher when I put it in an interior closet. Why?", "answer": "Closets have very limited air circulation - air doesn't move through them the way it moves through open spaces. Radon accumulates in dead-air pockets, so a closet reading will typically be higher than a reading in the open room. This is why monitor placement matters: put it in the main living area of the space, not in a corner, closet, or tight alcove.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0244", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My long-term average has been exactly 3.1 pCi/L for four months. Does that seem suspiciously consistent?", "answer": "Not really suspicious - consumer monitors round to one decimal place and averages can settle into a relatively stable range for extended periods, especially in homes with consistent HVAC and ventilation habits. If the readings day to day are still varying (which they should be), the long-term average smoothing them out to 3.1 is just math. An average that's truly stuck at one number with no daily variation might indicate a sensor issue, but an average that's stable at 3.1 across months with normal day-to-day fluctuation is fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0245", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon monitor gives a reading in whole numbers, not decimals. Is that normal?", "answer": "Some lower-cost monitors report in whole picocuries per liter, while others report to one or two decimal places. A monitor that reads \"3\" instead of \"3.2\" or \"3.4\" isn't broken - it's just displaying at a lower precision. For the purposes of deciding whether to mitigate, the difference between 3 and 3.4 pCi/L is not significant. If precise tracking matters to you, consider a monitor with decimal precision in its display.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0246", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon reading was 0.0 for the first month I owned the monitor and then shot up to 5.0 suddenly. Did something happen in my house?", "answer": "A jump from 0.0 to 5.0 after a month is a data-quality question before it's a radon question. Check whether: (1) you moved the monitor during that period, (2) a seasonal change occurred, (3) the initial 0.0 readings were during the sensor's calibration period when readings are less reliable. A jump that clean and abrupt from the detection floor to 5.0 is worth validating with a charcoal canister test rather than acting on immediately.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0247", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon monitor gives hourly, daily, weekly, and monthly views. The monthly view looks much calmer than the hourly view. Is that normal?", "answer": "Yes, completely normal. That's what averaging does - it smooths out the peaks and valleys. The hourly data shows you the actual variability of radon in your home (which can be dramatic). The monthly view shows you the central tendency across all those fluctuations. Both are real data - the hourly view shows you the range of what you're exposed to, and the monthly view shows you the overall average level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0248", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My mother-in-law claims our radon problem is because we live near a granite quarry. Is she right?", "answer": "Granite can be a source of radon because it contains uranium. Being near a granite quarry doesn't automatically mean your home has higher radon, but it's plausible that the local geology - which may extend under your foundation - has elevated uranium content. Whether that translates to elevated indoor radon depends on your specific foundation and soil conditions. The only way to know is to test. She's not wrong that granite and radon are connected; she just can't conclude anything definitive about your specific house from that observation alone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0249", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon test came back and I don't know if I should trust the company that analyzed it. How do I know it's a legitimate lab?", "answer": "Radon testing labs should be certified by a recognized proficiency program - in the U.S., look for EPA-approved proficiency programs or state certification. The lab report should include the lab's name, certification number, and method used. You can verify certification status through your state radon program or the EPA's list of approved proficiency programs. A legitimate result comes with documentation, not just a number on a piece of paper.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0250", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon is 3.8 pCi/L in the basement playroom but 0.6 pCi/L in the master bedroom on the second floor. My kids sleep upstairs. Should the basement number still drive mitigation?", "answer": "Yes. If your kids are regularly playing in the basement - which your question implies - the 3.8 reading is their exposure during that time. The 0.6 upstairs is great, but if they're spending hours a day at 3.8 in the basement, that's the number that drives your health calculation. Where people actually spend time is where the exposure happens, regardless of where they sleep.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0251", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "What does it mean when the Airthings app says my radon is in the \"green\" zone?", "answer": "Airthings uses a color-coded system: green generally means below 2.7 pCi/L (below the WHO reference level), yellow means 2.7-4.0 pCi/L (the consideration range), and red means above 4.0 pCi/L (the EPA action level). Green doesn't mean zero risk - all radon exposure carries some risk - but it means your level is below the thresholds where most health agencies recommend intervention.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0252", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon dropped from 4.8 to 3.1 after I opened a door between the garage and the basement. Is the garage ventilating my radon problem?", "answer": "Opening an interior door to the garage changes airflow through the connected spaces, and if the garage is better-ventilated than the basement, it can dilute basement air. But relying on a garage-to-basement airflow for radon control is not a real strategy - garages can also have their own air quality issues (car exhaust, chemicals), and you can't leave that door open year-round safely or practically. Fix the source with a proper mitigation system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0253", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon is high but my carbon monoxide detector never goes off. Are radon and CO the same thing?", "answer": "No, they are entirely different. Carbon monoxide is a combustion byproduct - produced by burning fuel in furnaces, water heaters, cars, and gas appliances. Radon is a radioactive gas produced by uranium decay in soil and rock. They have different sources, different health effects, and require different detectors. A CO alarm tells you nothing about radon, and a radon monitor tells you nothing about CO. You need separate devices for each.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0254", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon has been stable at 5.0 for six months and my contractor says my home would be easy to mitigate. What does \"easy to mitigate\" mean?", "answer": "\"Easy to mitigate\" typically means your home has characteristics that make a standard sub-slab depressurization system straightforward to install and likely to be effective: a relatively intact slab, good sub-slab communication (the gravel or soil beneath the slab allows good airflow), identifiable entry points, and accessible locations for pipe routing and fan placement. Homes with complicated foundations, multiple sub-slab sections, or unusual construction require more diagnostic work and sometimes more suction points. If your contractor is confident, that's a good sign.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0255", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon test was done during a period when we were renovating the basement. Could the renovation have skewed the result?", "answer": "Potentially, yes. Renovation activity - demolition, new openings, changed airflow, workers coming and going with doors propped open - can significantly affect radon readings. A test conducted during active renovation may read higher or lower than your actual baseline depending on what was happening. For a valid baseline reading, test under normal living conditions with no major construction activity, closed windows, and normal HVAC operation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0256", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon was 4.6 pCi/L during a 48-hour test done in January. I want to confirm before mitigating. Should I test again?", "answer": "A 48-hour test in January under closed-house conditions is a valid basis for mitigation. You don't need to re-test before acting - the EPA's guidance applies to appropriately conducted short-term tests. If you want more confidence, a 90-day long-term test would give you a better picture of your annual average, but at 4.6 pCi/L in winter, a re-test under the same conditions is likely to confirm the same range. The result you have is sufficient to move forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0257", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My neighbor did a radon test during summer and got 1.5 pCi/L. She says I should test in summer too so my number looks better. Is that the right approach?", "answer": "No. Testing in summer with open windows gives you a best-case reading that doesn't represent your actual year-round exposure. The EPA recommends testing under closed-house conditions to get a realistic picture of your exposure during the heating season - the time when radon accumulates and when you spend the most time indoors. A summer open-window reading might be low, but it's not an honest picture of what you're living with year-round.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0258", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My Airthings is connected to a smart home system that shows radon on a dashboard. The number on the dashboard is different from the app. Which is right?", "answer": "The Airthings app is the authoritative source for your device's readings. Third-party smart home integrations (Apple Home, Google Home, SmartThings) pull data from Airthings via API or integration, and there can be lag, rounding differences, or sync gaps that cause discrepancies. For any decision-making, use the Airthings app directly rather than a third-party display.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0259", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon is 4.0 but the test was done in summer. What might it be in winter?", "answer": "A summer closed-house reading of 4.0 pCi/L suggests your winter reading could be noticeably higher - potentially 20-50% above that, depending on your home. That would put winter readings in the 4.8-6.0 pCi/L range as a rough estimate. This is a meaningful data point: if you're at 4.0 in summer, you're likely well above that during the months when you're most exposed. Mitigation is warranted.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0260", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon was high before I bought the house and the prior owner had mitigation installed. Now it's creeping back up to 3.5. Is that normal?", "answer": "It's not unusual for post-mitigation levels to drift upward slightly over years if the system's fan performance has degraded or new entry points have developed. At 3.5, you're approaching but not yet at the action threshold. Have the system inspected - the fan output and suction pressure should be checked, and any new cracks or sump changes should be evaluated. A well-maintained system should continue performing for many years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0261", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon jumped from 2.0 to 4.5 after we had a new boiler installed. Is the boiler the problem?", "answer": "A new boiler changes the combustion and venting dynamics in the mechanical room. If the new boiler creates more negative pressure in the basement during operation, or if the installation opened up new pathways (pipe penetrations, modified flue connections), radon entry can increase. Have the installer verify that the combustion air supply is properly configured and that no new unsealed penetrations were created. If the boiler is creating depressurization, that's something a mitigation system would address as part of its overall pressure management.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0262", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon is 4.0 pCi/L and I've been on the fence for six months about mitigating. What usually makes people finally decide to do it?", "answer": "In my experience, it's usually one of three things: they start spending more time in the basement (new home office, kids using the space more); they're about to sell and want it off the table; or they just do the math and realize that six months of inaction was six more months of exposure above 4.0 pCi/L. There's no wrong time to decide - but the sooner you act, the sooner you reduce the ongoing exposure. If it would help to just talk through the numbers, give us a call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0263", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "Can I mitigate my own radon without hiring a contractor?", "answer": "DIY mitigation is technically possible - the materials are not restricted - but it requires understanding of sub-slab pressure dynamics, proper fan sizing, correct pipe routing, and safe exterior exhaust placement (above the roofline and away from windows). A poorly installed DIY system can be ineffective or even make things worse if it pulls conditioned air from the house instead of soil gas. Most state radon programs and the EPA recommend using a licensed contractor. If your state requires a licensed contractor for mitigation, DIY work may not be installation recordted.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0264", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon is 2.8 pCi/L and I've been healthy for 30 years in this house. Doesn't that mean the radon hasn't hurt me?", "answer": "Radon doesn't announce itself. There's no symptom during exposure and no way to know whether radon contributed to any health outcome until and unless lung cancer develops - and even then, it can't be definitively attributed to a single cause. Thirty years of feeling fine doesn't tell you whether radon affected your lung cancer risk. The risk is silent and cumulative. At 2.8 pCi/L, you're in a range where the risk is real but lower than at higher levels - the decision about mitigation is yours to make with that information.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0265", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon monitor's history shows a spike every time I bake bread. That can't be right, can it?", "answer": "It probably is timing coincidence rather than bread being a radon source. The oven fan, if it exhausts air, could create slight negative pressure. Or the timing just happens to line up with a daily pattern that has other causes. Bread baking doesn't produce radon. Check whether the spike corresponds to running an exhaust fan, opening the oven, or whether it's actually happening at the same time of day regardless of whether you're baking.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0266", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "I called a mitigation company and they said my sub-slab communication is poor. What does that mean and does it affect the price?", "answer": "Sub-slab communication refers to how freely air can move through the material beneath your slab when suction is applied. Homes with a gravel layer or sandy soil under the slab have excellent communication - one suction point can draw air from a large area. Homes with compacted clay, fractured rubble, or dense fill may have poor communication, meaning radon can only be drawn from the immediate area around the suction point. Poor communication typically means more suction points are needed, which does affect the scope and cost of the installation. It's a real diagnostic finding, not a sales tactic.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0267", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My Airthings says I've had 14 days of radon above 4.0 in the last 30. What does that mean for my health?", "answer": "It means your radon is elevated for a meaningful portion of the month. Cumulative exposure is what drives radon health risk - and 14 out of 30 days above 4.0 pCi/L represents significant average exposure even if some days were lower. Your long-term average is the best single number for health decisions, but 14 high-radon days per month is a pattern that calls for mitigation if it's consistent.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-readings-spikes-interpretation-0268", "phase": "phase3", "type": "answered_qna", "topic": "workflow-readings-spikes-interpretation", "category": "workflow-readings-spikes-interpretation", "subtopic": "Understanding Monitor Data in Context", "question": "My radon monitor shows \"NA\" for the last few days. What happened?", "answer": "\"NA\" typically means the device didn't have enough data to calculate a reading - possibly due to a power interruption, a sensor timeout, or a connectivity issue affecting data recording. Check that the device is powered and hasn't been reset. If it's been running continuously but showing \"NA,\" check the manufacturer's troubleshooting guide or contact support. This is usually a device or connectivity issue rather than a radon problem.\n\n\n*Questions or numbers that aren't adding up? Call or text Bill and we can talk through what your specific readings mean for your home and your family.*", "source": "cleaned-master/01-big-workflow-expansion-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "workflow-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The house I'm buying tested at 4.8 pCi/L. Should I walk away?", "answer": "No, I wouldn't walk away just because of that number. 4.8 pCi/L is above the EPA's action level of 4.0, but it's also a very fixable problem. A properly installed mitigation system typically brings levels well below 2.0 pCi/L. The question is less about whether to walk and more about who's going to pay to fix it and whether you can get that done before closing or get credit to handle it after.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The home I want to buy already has a mitigation system. Do I still need to test?", "answer": "Yes, absolutely test. A mitigation system being present doesn't tell you anything about whether it's actually working. Systems can fail, fans can die, the pipe seal at the slab can degrade. A working system with a well-installed fan will typically show very low levels, so if you test and the numbers are still elevated, something is wrong with the system. Never skip the test just because there's a pipe sticking out of the floor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "What is the radon action level for buying a house in Illinois?", "answer": "The EPA sets the national action level at 4.0 pCi/L, and Illinois follows that same guidance. At or above 4.0 pCi/L, the EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, the EPA says the risk is lower but real, and mitigation is worth considering. Illinois is also a high-radon state, so elevated readings are common - it doesn't mean the house is a bad purchase, it just means you need a plan.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The sellers mitigated before we put in an offer. Do I still need a new test?", "answer": "Yes. You need to verify the mitigation actually worked. Pre-mitigation is meaningless to you without a post-mitigation test confirming the levels came down. Ask for the post-mitigation test report. If they don't have one, or the test was done too soon after install, you should get your own test done before closing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "My realtor says radon is common and not to worry about it. Is that right?", "answer": "Your realtor is right that radon is extremely common - especially in Illinois and across the Midwest. But \"common\" and \"not worth worrying about\" are two different things. Radon is the second leading cause of lung cancer in the US. The good news is it's fixable, and mitigation works reliably. You should absolutely worry enough to test, know the number, and make an informed decision. Don't skip it just because it's routine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The radon test came back at 2.8. My agent says it's fine. What do I think?", "answer": "2.8 pCi/L is below the EPA's 4.0 action level, so your agent isn't wrong that it doesn't require action by EPA standards. But the EPA also says anything between 2.0 and 4.0 is worth thinking about, because the risk is real even if it's lower. I'd call it a heads-up, not an emergency. You could ask for mitigation, you could plan to retest after you move in, or you could install a long-term monitor to track it over time. It's your call - just don't assume 2.8 means zero risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "Who pays for radon testing when buying a house?", "answer": "Typically the buyer pays for the radon test as part of their inspection package. In some cases the seller may have already done a test, but buyers should be cautious about relying solely on a seller-provided test - you didn't choose the tester, you don't know the conditions, and you have no way to verify protocol was followed. Paying for your own test gives you confidence in the result. It's a relatively small cost compared to what you're buying.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "I'm buying a 1960s ranch house. Should I expect high radon?", "answer": "Ranch houses from that era often do have elevated radon, for a couple reasons. They tend to sit on slab or have older, cracked block foundations with lots of soil contact. They also often don't have the kind of tight construction that would limit soil gas entry points. Even so, age alone doesn't determine radon - the soil underneath matters more than the era of the house. Test it, and if it comes back elevated, know that older ranch houses typically mitigate well.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "I'm buying a house with a finished basement. Should I request a radon test?", "answer": "Yes, and finished basements are actually one of the reasons radon matters more than people think. Radon enters through the foundation, and if the basement is finished and used as living space - bedrooms, family rooms, offices - then you and your family are spending real time there. A finished basement doesn't make radon more dangerous, but it does mean you're more exposed to it if levels are elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The radon test was done 3 years ago and came back at 1.5. Is that still valid?", "answer": "For a real estate transaction, a three-year-old test is generally considered too old. Real estate tests are typically supposed to be current - meaning done within the last twelve months at most, and ideally as part of this transaction. Beyond that, radon levels can change over time as the foundation shifts, the soil settles, or conditions around the home change. A fresh test is the right move.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The listing says no radon issues detected. Does that mean they tested?", "answer": "Not necessarily. That language often just means the sellers aren't aware of an issue - it doesn't confirm a formal test was done with a certified device under proper closed-house conditions. It could mean they tested years ago, or tested informally, or simply never tested and are disclosing only what they know. Always get your own test done with a certified professional. Don't rely on listing language as a substitute for a real test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "I'm buying a new construction home. Should I test for radon?", "answer": "Yes. New construction doesn't mean low radon. Radon comes from the soil, and the soil under a brand-new house is exactly the same soil it was before the house was built. Some new homes are built radon-resistant (RRNC - Radon-Resistant New Construction) with a passive pipe system, but passive doesn't mean working - it often needs a fan added to be effective. Test the house before you close, or shortly after, so you have a real number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "Can I waive the radon contingency?", "answer": "You can, but I wouldn't advise it. Waiving the contingency means you're accepting the home regardless of what the radon levels turn out to be, without any recourse to ask the seller to address it. In a competitive market people do this, but go in with eyes open - if it comes back at 8 or 10 pCi/L, mitigation is on you. At minimum, if you waive the contingency, still do the test so you know what you're walking into and can plan accordingly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "How long does radon mitigation take? Can we do it before closing?", "answer": "Installation typically takes one day - a crew comes in, installs the fan and pipe system, seals any visible cracks, and it's done by end of day. Whether you can get it done before closing depends on how tight your timeline is. Most contractors can schedule within a week or two. Then you need a post-mitigation test, which takes a minimum of 48 hours. If there's enough runway, yes, it's very doable. If closing is in two weeks, it's worth trying. If it's in five days, you might be better off negotiating a credit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "My inspector did a 48-hour radon test. How accurate is that?", "answer": "A 48-hour short-term charcoal canister test is the standard for real estate transactions, and it gives you a reasonable snapshot of radon levels during those two days under closed-house conditions. It's not as precise as a 90-day test, but it's accepted across the industry as the standard method for purchase decisions. The key is that closed-house conditions were maintained - windows shut, limited opening of exterior doors - because that's what makes the result meaningful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "Does radon testing have to happen during a certain season for it to be accurate?", "answer": "Radon levels do tend to be somewhat higher in winter when houses are more closed up, but certified short-term tests are designed to be conducted under closed-house conditions year-round to create a consistent baseline. You can test in any season. If you're doing a real estate transaction in July, that doesn't mean the test isn't valid - just make sure closed-house conditions were followed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "I'm buying in the suburbs of Chicago. Is that an area with elevated radon?", "answer": "The Chicago suburbs sit in an area where elevated radon is common. Northern and central Illinois have geological conditions - glacial deposits, certain soil compositions - that tend to produce more radon. That doesn't mean every house will test high, but testing is especially important in this region. Don't assume a house is fine just because it's suburban or because you've heard of neighbors with low levels.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The radon test came back at 0.8 pCi/L. That's low, right?", "answer": "Yes, 0.8 is a low result. The outdoor background level of radon is typically around 0.4 pCi/L, so 0.8 is only modestly above that. You don't need to take any action on a reading that low. Even so, radon levels can change over time as conditions around the house shift, so running a long-term monitor after you move in is still a reasonable thing to do if you want peace of mind.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "Should I trust the test the seller paid for, or should I get my own?", "answer": "Getting your own test is always the better move in a real estate transaction. When the seller pays for the test, you have less visibility into whether the tester was truly independent, whether closed-house conditions were maintained, and whether the device placement followed protocol. Your own test, ordered through a certified professional of your choosing, gives you a result you can rely on and stand behind.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "I asked for a radon test and got a number of 4.0 exactly. Does that require mitigation?", "answer": "The EPA recommends fixing at 4.0 pCi/L or higher - so yes, 4.0 is at the action level. Even so, a test result is a snapshot with some margin of variability, so some professionals would say retest to confirm. But practically speaking, if you're at 4.0 in a real estate transaction, treating it as a mitigation situation and negotiating accordingly is the right call. Don't assume you're fine because you landed exactly on the line.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The seller says they've lived there 10 years with no health problems. Does that mean the radon is fine?", "answer": "Radon doesn't cause symptoms you'd notice - no headaches, no sore throat, no fatigue. The only risk is long-term lung cancer from cumulative radiation exposure, and that takes years to develop. Ten years of living in a house with elevated radon doesn't produce any observable warning signs. So no, the fact that the sellers feel fine tells you nothing about whether the radon levels are elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "My parents are buying a house and I'm worried about them being exposed to radon. The test came back at 5.0. What should I tell them?", "answer": "Tell them that 5.0 pCi/L is above the EPA action level and the house should be mitigated before or shortly after they move in. The risk from radon is cumulative - the longer you're exposed and the higher the level, the greater the risk. Getting a mitigation system installed is straightforward and brings levels down dramatically. The important thing is not to let it sit. Encourage them to make it a condition of purchase or handle it as soon as they take possession.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "Is a radon level of 3.5 in the basement normal in Illinois?", "answer": "3.5 pCi/L in the basement in Illinois isn't unusual - Illinois is a high-radon state and basement levels are typically higher than upper floors. It's below the EPA's 4.0 action level but in the range where the EPA says the risk is lower but still real. If the basement is living space, that's worth taking seriously. Whether you push for mitigation is up to you, but I wouldn't dismiss 3.5 as irrelevant.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The listing says radon mitigation system installed. Is that a good sign or should I still be worried?", "answer": "A mitigation system is generally a good sign - it means someone identified elevated radon and took steps to address it. But you still need a post-mitigation test to confirm it's actually working. Ask for documentation: the installer's report, the date of installation, and a post-mitigation test result. If there's no post-mitigation test on file, get one done before you close.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "My neighbor said they tested their house two streets over and it was fine. Does that mean this house is probably fine too?", "answer": "Radon varies significantly even house to house on the same street. The geology under each lot, the specific foundation construction, and the way air moves through each home all affect radon levels independently. A neighbor's result tells you almost nothing about what the house you're buying will test at. Test the actual house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The house we're buying is in a neighborhood that just got built out, on fill dirt. Should I be concerned about radon?", "answer": "Fill dirt is worth asking about, but radon depends more on what's underneath the fill than the fill itself. In general, radon comes from uranium and radium naturally present in soil and rock, and fill material varies widely in composition. If the area sits on radon-prone geology, the fill doesn't solve that problem. Test the house the same way you would any other.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The sellers say they tested every year and it was always below 4. Do I still need my own test?", "answer": "I'd still get your own test. You don't have visibility into their testing method, who conducted it, or whether conditions were consistent year to year. Annual testing is a responsible practice, but for a real estate transaction, a current test conducted by a certified professional under your oversight is the standard you want. Their records are useful context, not a substitute.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "How much should I worry about radon in a house with a crawl space instead of a basement?", "answer": "Crawl space homes can absolutely have elevated radon - radon enters through the soil-crawl space interface, and from there it migrates up into the living area above. The mitigation approach is a bit different (often a ground cover and depressurization under the cover rather than slab penetration), but it works. Test it the same way you would any other home, and if it's elevated, mitigation is very doable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "What's the difference between a short-term and long-term radon test for a home purchase?", "answer": "Short-term tests run 48 to 96 hours and are the standard for real estate transactions because they fit within inspection timelines. Long-term tests run 90 days or more and give you a more accurate picture of average annual exposure. For a purchase decision, you'll use the short-term test. Once you move in, following up with a long-term test or a continuous monitor gives you a more complete picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "Can the seller do the radon test themselves and send me the results?", "answer": "No. In a real estate transaction, the test should be conducted by a state-certified radon measurement professional, not the seller. Having the seller conduct their own test creates an obvious conflict of interest and means the result can't be verified. In Illinois, state law and industry standards expect testing to be done by certified, independent testers.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "Is it worth paying extra for a continuous electronic radon monitor vs. a charcoal canister for the inspection?", "answer": "A continuous monitor gives you more information - it records readings hour by hour, so you can see whether conditions were maintained properly and whether levels fluctuated significantly. A charcoal canister gives you a single averaged result. Both are acceptable for real estate transactions. If you want more transparency in the data, a continuous monitor is worth the modest extra cost.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The house tested at 4.3 and the sellers are offering to mitigate. What should I look for to make sure it's done right?", "answer": "Ask that the mitigation be done by a licensed and certified radon mitigation contractor, that a post-mitigation test be conducted at least 24-48 hours after installation (ideally with 30 days for meaningful results), and that you receive the full report from the mitigator. You want documentation of what was installed, where, and what the post-mitigation test result showed. If the result is still elevated after mitigation, that's a problem to address before you close.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "Can radon testing be done in winter? We're trying to close in January.", "answer": "Yes. Radon testing can and should be done year-round, and winter is actually a consistent time to test because houses are typically buttoned up anyway, which mirrors the closed-house conditions the test requires. Cold weather doesn't compromise the test - in fact, you'll often see consistent results in winter because the house is naturally closed up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "What do I do if the seller refuses to test for radon at all?", "answer": "Then you test on your own dime as part of your inspection. You don't need the seller's permission to have the house tested - you just need the right to access during the inspection period, which your purchase agreement typically provides. A seller refusing to pay for testing is different from you being unable to get one done. Get the test, get the number, and make your decisions from there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "Is 7.0 pCi/L dangerous? The house my parents want to buy tested that high.", "answer": "The EPA considers anything at or above 4.0 pCi/L to warrant mitigation, so 7.0 is well into that range. The risk from radon is cumulative and long-term - it's not an acute emergency, but it's not something to sit on either. A well-installed mitigation system will typically bring 7.0 down to under 2.0 pCi/L, often much lower. Your parents should make mitigation a condition of the purchase and get a post-mitigation test before they move in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "My agent is pushing me to waive all contingencies to compete. Should radon be one I keep?", "answer": "I'd keep the radon contingency if at all possible, especially in Illinois. If you waive it and the house tests at 8 or 10 pCi/L, the mitigation cost lands entirely on you with no leverage. If you absolutely have to waive it to be competitive, at minimum still do the test so you know what you're getting into before closing. Waiving the contingency and skipping the test is the riskiest combination.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "The sellers are saying the mitigation system is only a year old. Should I believe them and not test?", "answer": "Trust but verify. Ask for the installation paperwork and the post-mitigation test report. A one-year-old system should have documentation. If they can't produce it, that's a red flag. Even with documentation, getting a current test done gives you direct confirmation the system is still performing. Fans can fail. Pipes can get blocked. A quick 48-hour test tells you where things stand right now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Understanding Your Test Results", "question": "What happens if closing already happened and then I find out radon is high?", "answer": "At that point, the house is yours and the mitigation is your responsibility to arrange. That's exactly why testing before closing matters - once you've closed, your options narrow considerably. Get a licensed radon mitigation professional in to do an assessment and installation. The good news is that mitigation works regardless of when it's done. The house will still get fixed; you just won't have the seller contributing to the cost.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-buyer-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "I'm buying a two-story house with no basement - just a slab. Do I still need to test for radon?", "answer": "Yes. Slab construction doesn't eliminate radon - radon enters through cracks and penetrations in the slab, through utility openings, and around pipes. It tends to be lower in slab homes on average, but not always. The first floor of a slab home is in direct contact with the foundation, so test it. Don't assume you're in the clear because there's no basement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "We're looking at a house over a garage - no basement, no slab foundation touching soil in the living area. Is radon still a concern?", "answer": "Homes built over garages with living space above grade typically have less radon risk because the living areas aren't in direct contact with soil gas, but it depends on the specific construction. If there's any basement or below-grade area connected to the living space, radon can still enter and accumulate. Even if it turns out to be low-risk, a quick test will confirm that and give you peace of mind.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "I'm buying a mobile home or manufactured home. Do those get radon?", "answer": "Manufactured homes on permanent foundations with skirting can accumulate radon, particularly if they're set on a slab or have a crawl space. Homes on piers with open, well-ventilated undersides tend to have lower radon because there's less opportunity for accumulation. The specific setup matters. If the home is set on a full slab or enclosed crawl space, treat it the same as any other home and test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "The house is a bi-level with the lower level half underground. How does that affect radon?", "answer": "Bi-levels are common and can absolutely have elevated radon. The lower level, being partially below grade, is where radon is most likely to enter. If that lower level is finished and used as living space - bedrooms, family room - the exposure potential is meaningful. Test at the lowest livable level, which in a bi-level is typically that lower floor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "I'm buying a 1970s split-level in the suburbs. Should radon be on my radar?", "answer": "Yes. Split-levels from that era often have significant below-grade space and older foundations with more entry points for soil gas. They're common in Midwest suburbs and radon is a real consideration. Test it, and know that split-levels typically mitigate well - the multiple levels can make installation a bit more involved, but a skilled mitigator handles them routinely.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "The home I'm buying is a Victorian-era house from the 1890s, rubble stone foundation. What should I expect for radon?", "answer": "Old stone foundations are among the least airtight foundation types - lots of gaps, mortar gaps, and soil contact. That can mean more radon entry points, though it can also mean more natural ventilation that prevents accumulation. You can't predict the result from the foundation type alone. Test it. If it's elevated, mitigation on a stone foundation is more involved than a modern poured concrete slab, but it's definitely doable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "The house has a partial basement and part slab. Does that complicate radon testing or mitigation?", "answer": "It can complicate both slightly. The test should still be placed at the lowest livable level - if the basement portion is used as living space, test there. Mitigation in a mixed-foundation home may require suction points in both the basement and the slab section to depressurize all soil-contact areas. A competent mitigator will assess the foundation layout and design accordingly. It's not a deal-breaker, just something to be aware of.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "I'm buying a condo on the third floor. Does radon apply to me?", "answer": "For a third-floor unit, the soil contact is many floors away from where you live. Radon risk is dramatically lower in upper-floor condos. Radon can still enter through the building if the lower levels are highly concentrated and it circulates in HVAC systems, but this is generally not a significant concern for upper-floor residents. If you're in a ground-floor condo with slab contact, treat it more like a house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "I'm buying a condo on the ground floor or in a garden-level unit. Is radon a concern?", "answer": "Ground-floor and garden-level condos can definitely have radon concerns because you're in contact with or near the foundation. The building's common areas and the shared slab can be radon entry points. Testing is harder to arrange in a condo context and mitigation is a building decision, not an individual unit decision. If possible, have a radon professional assess the situation before you close, and factor in how building management handles indoor air quality issues.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "The house we want to buy is a new build in a subdivision. Do I need to ask the builder about radon?", "answer": "Yes. Ask whether the home was built with RRNC - Radon-Resistant New Construction features - and get the specifics: is there a passive sub-slab vent pipe, and is there a junction box installed for easy fan addition? Then test the home. Some RRNC homes test fine without a fan; others benefit from activating the system. A test will tell you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "The house is right next to a river. Does that mean radon is higher or lower?", "answer": "Proximity to water doesn't reliably predict radon levels. Radon comes from uranium and radium in soil and rock, and floodplain soils have their own variable geology. In some areas, river valleys are actually lower radon zones; in others they're not. The only way to know is to test. Don't use geography as a substitute for measurement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "I'm buying a house in a rural area of Illinois. Is radon more or less of a concern than in a city?", "answer": "Rural or city doesn't determine radon - the underlying geology and the specific foundation do. Some rural areas of Illinois sit on high-radon geology; others don't. There's no blanket rule that rural means higher or lower. Test the house the same as you would anywhere. In Illinois overall, elevated radon is common enough that testing is the right default wherever you are.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "The house is on a hill. Does that affect radon?", "answer": "Topography can have some effect on radon because hillside homes sometimes have more basement wall exposed to soil pressure and different drainage patterns, but it's not a reliable predictor. What matters is what's in the soil under the house, how the foundation is constructed, and how air moves through the home. Test the house - that tells you more than the landscape.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "We're buying a log cabin. Does radon apply to that kind of home?", "answer": "Yes. If the cabin sits on a foundation - slab, block, or crawl space - radon can enter the same way it does in any home. The log wall construction doesn't change the foundation situation. Test at the lowest level of the cabin, and if it's elevated, mitigation is very doable even in non-traditional structures.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "The house I'm buying was previously used as a rental for 15 years. Does that affect radon risk?", "answer": "The rental history doesn't affect the underlying radon level - radon comes from the soil, not from how the house was used. The rental use might mean more deferred maintenance and potentially more foundation cracks or gaps that serve as radon entry points, but that's speculative. Test it and let the result speak for itself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "I'm buying a lake house in Wisconsin. Should I test for radon?", "answer": "Wisconsin has significant radon risk in many areas, and lake houses are no exception - if anything, lake homes are sometimes used less frequently, meaning fewer windows open and potentially higher accumulation. Test it like any home. If it's a second property and you're spending extended time there, radon exposure still accumulates over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "Is radon worse in houses with French drains or interior drainage systems?", "answer": "Interior drainage systems and French drains that connect to the sub-slab space can sometimes create pathways that allow radon-laden soil gas to more easily enter the basement. It depends on the specific installation. If the house has an interior drainage system, mention it to the radon professional doing the assessment - it's relevant context for both the test placement and potential mitigation design.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon in Specific House Types", "question": "The house was flipped and the flippers put in a new slab. Does a new slab mean lower radon?", "answer": "A new slab is better than a cracked old slab for limiting radon entry points, but it's not a warranty of low levels. The soil under the slab still produces radon, and concrete isn't completely impermeable. Penetrations for plumbing and utilities are common entry points regardless of slab age. Test it and let the number be your guide.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-buyer-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Illinois-Specific Questions", "question": "I'm buying in Chicago proper - do city homes have radon?", "answer": "Yes. Chicago and its surrounding neighborhoods have elevated radon in many homes, particularly those with basements, which is most of them. Chicago bungalows, two-flats, three-flats, and older single-family homes all warrant testing. The fact that you're in a dense urban area doesn't reduce radon risk - it depends on the foundation, not the zip code.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Illinois-Specific Questions", "question": "Is the radon map from the EPA accurate for deciding if I should test?", "answer": "The EPA map is useful for understanding regional risk and setting expectations, but it's not a substitute for testing. The map shows predicted average indoor levels by county based on geologic data, aerial surveys, and measured home data. Any individual house can fall well above or below the county average. Use the map as context, not as a replacement for a test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Illinois-Specific Questions", "question": "I'm buying in the collar counties around Chicago - DuPage, Kane, Will. Is radon common there?", "answer": "Yes. DuPage, Kane, and Will counties are in high-radon territory. These are among the areas where elevated indoor radon readings are commonly found. Testing is especially important in these counties, and mitigation is a routine part of the home purchase process for many buyers there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Testing Validity, Timing, and Protocols", "question": "The radon test showed 4.2 in the basement and 1.1 on the main floor. Which number counts?", "answer": "For a real estate transaction, the test is typically conducted at the lowest livable level, which is the basement - so 4.2 pCi/L is your number. The EPA action level applies to the lowest livable level of the home. The main floor reading is informative but it's the basement number that drives the decision. At 4.2, mitigation is warranted.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Testing Validity, Timing, and Protocols", "question": "The inspector placed the radon test on the second floor. Is that right?", "answer": "No. Standard protocol for real estate radon testing is to place the device at the lowest livable level of the home - typically the basement or, if there's no basement, the first floor. A test placed on the second floor is not following standard protocol and likely underestimates the actual radon levels in the home. That test result is not reliable for making a purchase decision.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Testing Validity, Timing, and Protocols", "question": "Can I do a DIY radon test with a kit from the hardware store for a home purchase?", "answer": "Hardware store charcoal test kits are designed for homeowner screening, not necessarily for formal real estate transactions. In Illinois, the real estate transaction test should be conducted by a state-certified radon measurement professional. A DIY kit result may not be accepted as an official real estate test, and there's no way to verify chain of custody or that protocol was followed. Use a certified professional for the purchase test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Testing Validity, Timing, and Protocols", "question": "The seller opened windows during the test because it was hot. Does that void the test result?", "answer": "Yes, that's a serious problem. Opening windows during a radon test violates closed-house conditions, which are required to get a reliable result. Ventilating the house during the test artificially lowers the result. A test conducted with open windows is not valid for a real estate decision. You'd need a new test conducted under proper closed-house conditions with the seller or an agent maintaining those conditions for the full 48-hour window.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Testing Validity, Timing, and Protocols", "question": "What are \"closed house conditions\" and why do they matter for the radon test?", "answer": "Closed house conditions mean all windows and exterior doors are kept closed except for normal entry and exit during the 48-hour test period. No fans or ventilation systems that draw outside air should be running. This standardizes the test so it reflects what radon levels are like in the home as it's actually lived in, not aired out. Without closed house conditions, the result is artificially low and meaningless for a purchase decision.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Testing Validity, Timing, and Protocols", "question": "Can the radon test and home inspection happen at the same time?", "answer": "Yes, and that's actually the most common and efficient approach. The home inspector often arranges for the radon device to be placed at the start of the inspection. The device sits for 48 hours, then is retrieved and sent to the lab. The test runs in the background while the home inspection analysis is being compiled. This is standard practice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Testing Validity, Timing, and Protocols", "question": "If the radon test was negative, do I need to retest after I move in?", "answer": "A negative test - meaning a result below 4.0 or even below 2.0 - is good news but not a permanent warranty. Radon levels can change over time. The EPA recommends retesting every two years or after any significant change to the home (renovation, adding a basement room, HVAC changes). Running a long-term monitor after you move in is a practical way to keep tabs on it without repeating the formal test process.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-buyer-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Testing Validity, Timing, and Protocols", "question": "The test was placed in the laundry room. Is that a valid location?", "answer": "Possibly, if the laundry room is in the basement or at the lowest livable level and meets other placement criteria. The device should not be placed in a room that's regularly used for washing (humidity can interfere with some devices), near exterior walls or windows, or in a space with unusual ventilation. Standard placement is in the lowest livable level, away from windows, exterior walls, and high-humidity areas. If the laundry room is the only basement room and the inspector placed it there, ask about the specific conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Testing Validity, Timing, and Protocols", "question": "Can I request that the radon test be done over a longer period for more accuracy?", "answer": "You can always choose to do a long-term test (90+ days) in addition to or instead of a short-term test, but for real estate transaction purposes the 48-hour short-term test is the standard. If you want a more accurate picture of annual average exposure after you move in, a long-term test or a continuous monitor run for several months is the way to go. For the purchase decision itself, the short-term test is what the industry uses.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Your Agent's Advice and Second Opinions", "question": "My realtor is downplaying the radon reading of 4.5. Should I trust them?", "answer": "Your realtor knows real estate - they're not necessarily a radon expert. 4.5 pCi/L is above the EPA action level, and dismissing it isn't the right call. Radon is fixable, so it's not a disaster, but it does need to be addressed. Get a second perspective from a certified radon professional if you want someone who knows the subject deeply. Your realtor's job is to help close the deal - that's not always the same as radon expertise.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Your Agent's Advice and Second Opinions", "question": "I'm a first-time buyer and my agent keeps telling me everyone in this area has radon and it's no big deal. Is that normal?", "answer": "It's true that radon is widespread in many parts of Illinois and the Midwest. But \"common\" doesn't mean \"no big deal.\" The fact that a lot of houses have it means there are a lot of mitigation systems being installed - not that you should ignore elevated levels. A good agent acknowledges it and helps you navigate it. An agent who waves it away completely may be prioritizing the deal over your interests.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Your Agent's Advice and Second Opinions", "question": "I asked my agent about radon testing and they looked at me blankly. Should I be worried about their competence?", "answer": "Radon knowledge varies widely among real estate agents. Some are very experienced with it; others have never prioritized it. That doesn't necessarily mean your agent is bad at their job overall, but for radon specifics you want to go to a certified radon professional rather than relying on your agent's expertise. Use your agent for negotiations and contracts; use a radon pro for the technical side.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Your Agent's Advice and Second Opinions", "question": "The seller's agent sent over a radon report showing 2.5 pCi/L. Should I accept that?", "answer": "A seller-provided report is useful as a starting reference, but for a real estate transaction I'd still recommend getting your own test done by a certified professional. You don't know the conditions under which the seller's test was conducted, how old it is, or whether the device placement followed protocol. Your own independently conducted test gives you a result you can rely on and stand behind.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Your Agent's Advice and Second Opinions", "question": "My agent said radon is only a problem in basements you actually sleep in. Is that right?", "answer": "That's an oversimplification. Radon is most concentrated at the lowest level, but it doesn't stay only in the basement - it moves upward through the house. A finished basement is a significant concern because people spend time there. An unfinished basement still matters because the radon that enters there circulates into the main living areas. The risk scales with how much time you and your family spend in elevated-radon spaces, not just whether you literally sleep in the basement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Your Agent's Advice and Second Opinions", "question": "My agent is also a radon tester. Is that a conflict of interest?", "answer": "It can be, depending on the situation. If your buyer's agent is also personally conducting your radon test, there's a potential conflict because they benefit from a smooth transaction. In theory, an agent who is also a certified radon tester can do the job professionally - but for maximum independence, having a separate company conduct the test is cleaner. At minimum, verify their radon certification is current and independent of their real estate license.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "After Closing and Long-Term Ownership", "question": "We closed on a house before we knew about radon. The result came back high afterward. What do we do?", "answer": "Get a mitigation system installed. This is now your problem to solve, but the good news is it's solvable. Contact a state licensed radon mitigation professional, get an assessment and bid, and schedule the installation. A good system will get your levels down. Going forward, plan to retest annually or run a continuous monitor so you always know where you stand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "After Closing and Long-Term Ownership", "question": "I bought a house a year ago and am just now testing for radon. Result is 5.1. What's my next step?", "answer": "Get a mitigation system installed. 5.1 pCi/L is above the EPA action level and warrants action. The good news is you're testing and you know the number - a lot of people live in elevated-radon homes without ever testing. Call or text a state licensed radon mitigation professional, get an assessment, and get it scheduled. Once the system is installed, retest to confirm the levels came down.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "After Closing and Long-Term Ownership", "question": "We just moved into our new house. How soon should I test for radon?", "answer": "If a certified test was done during the purchase process and the results were acceptable, you don't need to rush another test immediately. But following up with a long-term test or a continuous monitor within your first year of ownership is a good practice - it gives you a more complete picture of annual average exposure. If you didn't test at purchase, do it now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "After Closing and Long-Term Ownership", "question": "If I mitigate radon in my house, do I ever need to test again?", "answer": "Yes. A properly functioning mitigation system should keep levels low, but systems can fail over time. The fan motor can wear out, the pipe can get blocked, or the seal at the slab can degrade. The EPA recommends retesting every two years even with a mitigation system in place. Some homeowners prefer running a continuous monitor year-round so they have ongoing visibility without waiting for a periodic test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "After Closing and Long-Term Ownership", "question": "My mitigation system was installed two years ago. Should I retest now?", "answer": "Yes, every two years is a reasonable retesting interval for a home with a mitigation system. Fan motors can degrade over time, and confirming the system is still keeping levels low is worth doing. A short-term test or a long-term monitor will give you that confirmation. If the levels have risen, it usually means the fan needs replacement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "After Closing and Long-Term Ownership", "question": "The mitigation fan in the house I bought is making noise. Does that mean it's failing?", "answer": "Noise can indicate a fan that's wearing out, running dry, or has debris in the housing. A healthy fan typically runs quietly in the background. If the fan is making unusual sounds - grinding, rattling, or significant humming - have a licensed radon mitigation professional take a look. A failing fan means the system may not be depressurizing the sub-slab effectively, which can allow radon levels to climb. Retest if you're uncertain.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-buyer-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "After Closing and Long-Term Ownership", "question": "I moved into a house with a mitigation system. The manometer on the pipe shows zero pressure. Is that a problem?", "answer": "Yes. The U-tube manometer on a radon mitigation system is a visual indicator of whether the system is creating suction. If both sides of the U-tube are at the same level (zero differential), it typically means the fan isn't creating negative pressure - either the fan has failed or there's an issue with the system. Have a licensed radon mitigation professional inspect it and retest the radon levels. Don't assume the system is working just because the fan is plugged in and quiet.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-buyer-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "After Closing and Long-Term Ownership", "question": "We have a radon system but the previous owners never retested after installation. What should I do?", "answer": "Test now. This is a common situation in home purchases - systems get installed, the house sells, and the post-mitigation test never gets done or never gets handed off to the new owner. Run a current test, either a 48-hour short-term or set up a continuous monitor. If the levels are below 2.0 pCi/L, the system is probably doing its job. If not, have a mitigator inspect the system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "After Closing and Long-Term Ownership", "question": "Is radon a problem I need to worry about year-round or just in winter?", "answer": "Radon is a year-round concern, though levels tend to be somewhat higher in winter when homes are closed up and heating systems change pressure dynamics in the house. You can't ignore it in summer. If you're running a continuous monitor, you'll notice seasonal variation - that's normal. The long-term average matters more than any single season's reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "After Closing and Long-Term Ownership", "question": "My kids spend a lot of time in the basement playing games and watching movies. Should I be more worried about radon?", "answer": "Time spent in elevated-radon spaces is exactly how exposure accumulates. If your kids are spending hours per day in a basement with elevated radon, that's meaningful cumulative exposure. This is one of the strongest reasons to test the basement specifically and, if levels are elevated, to mitigate promptly. Radon doesn't cause symptoms you'd notice - the risk is long-term lung cancer, and it's tied to cumulative exposure over years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "After Closing and Long-Term Ownership", "question": "My home office is in the basement. Does that change how seriously I should take a borderline radon level?", "answer": "Yes, significantly. If you're working 8 hours a day in a basement with a radon level of 3.5 or 4.0 pCi/L, your annual exposure is considerably higher than someone who passes through the basement a few times a day. For a home office situation, I'd treat even 3.0 pCi/L as a mitigation-worthy number. The EPA's guidance is based on average occupancy - heavy basement users should hold themselves to a stricter standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "After Closing and Long-Term Ownership", "question": "Can I use a Corentium Home monitor to track radon after I move in?", "answer": "A Corentium Home is a consumer-grade continuous monitor that provides ongoing readings. It's a reasonable tool for tracking trends and getting a general sense of whether your levels are staying low. It's not a certified professional device, and Illinois wouldn't accept it as an official real estate transaction test, but for personal ongoing monitoring in your own home it does the job. Know that accuracy varies and treat the readings as indicative rather than laboratory-precise.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Health and Risk Questions", "question": "My real estate agent said radon gives you headaches. Is that true?", "answer": "No, that's not accurate. Radon does not cause headaches, sore throats, fatigue, or any acute symptoms. It's an odorless, colorless gas and you cannot feel or detect exposure in any immediate way. The only known health risk from radon is long-term lung cancer from cumulative radiation exposure over years. If you have specific health concerns, talk to your doctor - but don't count on symptoms to warn you that radon is present.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Health and Risk Questions", "question": "My husband has already had lung cancer. Does that change how seriously we should treat radon in a new home?", "answer": "Radon is a long-term lung-cancer risk. For personal medical concerns, talk with a doctor. If your home has elevated radon, Bill can explain what mitigation would involve.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-buyer-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Health and Risk Questions", "question": "Is radon dangerous for kids?", "answer": "Children tend to breathe more air per unit of body weight than adults, and they may spend more time at floor level or in basement play areas. The risk from radon is the same mechanism - cumulative radiation to lung tissue from radon decay products. Kids with long lives ahead of them and heavy exposure in formative years are a legitimate concern. This is one of the reasons parents should test homes thoroughly and not dismiss borderline readings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Health and Risk Questions", "question": "My pregnant wife is worried about radon in the house we're buying. The test came back at 3.8. Should we mitigate?", "answer": "3.8 pCi/L is just below the EPA action level, but the EPA acknowledges that levels between 2.0 and 4.0 carry lower but real risk. For a family with a pregnancy and plans for a new child in the home for decades, I'd say mitigating at 3.8 is a reasonable and conservative decision. It's not an emergency, but it's not something I'd leave unaddressed under those circumstances. For medical questions about risk to the pregnancy specifically, your OB is the right resource.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Health and Risk Questions", "question": "I've lived in this house for two years before I found out to test. The result is 6.0. How worried should I be about the last two years?", "answer": "That's understandably concerning, but the risk from radon is cumulative over a lifetime. Two years at 6.0 pCi/L is meaningful exposure, but it's not a certainty of anything. The most important thing you can do now is get the house mitigated so future exposure stops accumulating. Talk to your doctor if you have concerns about your personal health history - that's a conversation for a physician, not a radon contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Health and Risk Questions", "question": "My mother-in-law says she grew up in a house with high radon and is fine. Should I take that as reassurance?", "answer": "Individual outcomes don't tell you much about population-level risk. Most smokers don't get lung cancer either, but that doesn't mean smoking is fine. Radon raises your statistical risk of lung cancer; it doesn't warranty it. The fact that someone specific had exposure and is fine is anecdote, not evidence that radon is harmless. The epidemiology on radon is solid - it's the second leading cause of lung cancer in the US.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-buyer-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Health and Risk Questions", "question": "Can radon affect your lungs immediately? Like if I go into a high-radon basement, will I notice anything?", "answer": "No. There is no immediate symptom from radon exposure. You cannot smell it, taste it, feel it in your lungs, or experience any sensation. The mechanism of harm is radioactive decay products attaching to lung tissue over extended exposure - a process that takes years to potentially result in cancer. Going into a high-radon basement once doesn't cause any acute effect you'd notice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Health and Risk Questions", "question": "My doctor told me I should avoid radon exposure. What level is really protective?", "answer": "For personal medical guidance in your specific situation, stay in conversation with your doctor. From a general public health standpoint, the EPA recommends fixing at 4.0 pCi/L and considering it between 2.0 and 4.0 pCi/L. There's no level below which risk is definitively zero - even outdoor radon (typically around 0.4 pCi/L) has trace risk. The goal with mitigation is to reduce levels as low as reasonably achievable, which usually means below 2.0 pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Health and Risk Questions", "question": "Does radon cause any cancer besides lung cancer? (Health and Risk Questions)", "answer": "The established health risk from radon is lung cancer - specifically from inhaling radon decay products that irradiate lung tissue. There is some research looking at other possible associations, but lung cancer is the primary and well-documented concern. For anything beyond that, this is a question for a physician or oncologist, not a radon contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Health and Risk Questions", "question": "How long does it take for radon to cause harm?", "answer": "Radon-related lung cancer typically develops over many years of cumulative exposure. It's not an acute risk from short-term exposure - it's a long-term risk that depends on both the level of radon and the total duration of exposure. This is why the emphasis is on testing, knowing your average level, and mitigating if needed - you're managing long-term risk, not responding to an immediate hazard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Health and Risk Questions", "question": "We want to set up a bedroom in the basement for our teenager. Should radon affect that decision?", "answer": "Yes, absolutely factor radon into that decision. A bedroom means many hours of daily occupancy - 8 or more hours of sleep plus time awake in the room. If the basement radon level is elevated, that's significant cumulative exposure for your teenager. Test the basement before setting it up as a bedroom, and if levels are at or above 4.0 pCi/L, mitigate before they move down there. Even at 2.0-4.0 pCi/L, it's worth considering given the occupancy level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Mitigation Systems - What to Know Before You Buy", "question": "How does a radon mitigation system actually work?", "answer": "The most common system is called sub-slab depressurization. A hole is drilled through the basement slab, a pipe is installed, and a fan draws air from under the slab and exhausts it outside above the roofline. This creates negative pressure under the slab, so instead of radon-laden soil gas pushing up into the house, it gets pulled out and vented harmlessly outside. It's simple, effective, and doesn't meaningfully affect your heating or cooling.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Mitigation Systems - What to Know Before You Buy", "question": "Will a radon mitigation system be visible and ugly inside the house?", "answer": "The pipe typically runs from the basement floor to an exterior wall or up through the house to exit above the roofline. In many installations the pipe is routed through a closet, utility area, or along an inconspicuous wall. Experienced installers try to route pipes in unobtrusive ways. The fan is usually mounted outside or in a non-living area. It's not invisible, but a well-done installation is tidy. Most homeowners stop noticing it quickly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Mitigation Systems - What to Know Before You Buy", "question": "Does a radon mitigation system use a lot of electricity? (Mitigation Systems - What to Know Before You Buy)", "answer": "Radon mitigation fans are generally low-wattage - most run somewhere in the range of 20 to 50 watts, similar to a light bulb. They run continuously, but the annual electricity cost is minimal. It's not meaningfully different from the baseline electricity draw of other small appliances running 24/7. The operating cost is very low.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Mitigation Systems - What to Know Before You Buy", "question": "If a house I'm buying has a radon system, does it affect my homeowner's insurance?", "answer": "A radon mitigation system doesn't typically affect homeowner's insurance premiums. It's not a risk factor - if anything, it demonstrates the home has been responsibly managed. Check with your specific insurer if you have questions about your policy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Mitigation Systems - What to Know Before You Buy", "question": "Does a radon mitigation system need maintenance?", "answer": "The system requires minimal maintenance. The fan motor should be checked periodically and the manometer (the U-tube indicator on the pipe) should show a pressure differential - that's how you know it's working. The fan should be replaced if it fails, typically every 5 to 10 years depending on the model. Most homeowners retest every two years to confirm performance and replace the fan when the time comes. It's not a high-maintenance system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Mitigation Systems - What to Know Before You Buy", "question": "Will the seller's radon mitigation system transfer to me when I buy the house?", "answer": "Yes - the system is part of the house. When you purchase the home, the mitigation system comes with it. Ask the seller for any installation documentation they have: the installer's report, the model/spec of the fan, and the post-mitigation test results. You'll want to know who installed it and when, and you'll want to have it inspected by a certified professional as part of your purchase evaluation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Mitigation Systems - What to Know Before You Buy", "question": "The mitigation system has a sticker on the pipe from a contractor who went out of business. Can someone else service it?", "answer": "Yes. The system itself - the pipe and the fan - is not brand-specific or contractor-specific. Any qualified radon mitigation professional can inspect, service, or modify a system regardless of who originally installed it. The original contractor going out of business doesn't affect the system's function or your ability to get service.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Mitigation Systems - What to Know Before You Buy", "question": "How do I know if the mitigation system in the house I'm buying is still working?", "answer": "Two ways: check the manometer (the plastic U-tube indicator on the pipe) - it should show unequal liquid levels indicating suction - and conduct a radon test. If the test result is low (below 2.0 pCi/L), the system is almost certainly doing its job. If the manometer shows no differential, or the test comes back elevated, the system may need the fan replaced or servicing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Mitigation Systems - What to Know Before You Buy", "question": "The house I'm buying has multiple mitigation system pipes. Is that normal?", "answer": "Multiple suction points are common in larger homes, homes with multiple foundation sections, or homes where the soil is dense and a single point doesn't adequately depressurize the whole sub-slab area. Two, three, or even more pipes running off a single fan or multiple fans isn't unusual. It just means the original mitigator designed a more comprehensive system. The presence of multiple pipes doesn't indicate a problem - it indicates a thorough installation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Mitigation Systems - What to Know Before You Buy", "question": "The house has a radon pipe but no fan. What does that mean?", "answer": "That's a passive system, which is typically installed during construction as a radon-resistant new construction (RRNC) feature. Without a fan, it relies on natural air currents and stack effect to move some soil gas out of the slab, which works to a limited degree. Adding a fan converts it to an active system and significantly improves performance. If the house tests below 4.0 pCi/L with the passive system, it may be fine as-is; if levels are elevated, adding a fan is straightforward and cost-effective.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Mitigation Systems - What to Know Before You Buy", "question": "The mitigation system is in the garage, not the basement. Is that okay?", "answer": "Mitigation systems are sometimes installed in garages when the pipe route works better that way, particularly in homes where the basement slab and garage slab are continuous. As long as the fan is creating adequate suction under the slab and the radon levels in the living areas are low, the location of the fan unit itself isn't the critical factor. A post-mitigation test result showing low levels is your confirmation that it's working regardless of where the fan is mounted.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Mitigation Systems - What to Know Before You Buy", "question": "The listing says \"radon remediated.\" What should I ask the seller to provide?", "answer": "Ask for: the name of the mitigation company that did the work, the date of installation, the post-mitigation radon test result (and who conducted it), and any warranty documents. \"Remediated\" without supporting documentation is just a claim. The post-mitigation test result is the thing that actually tells you whether it worked. If those documents don't exist or can't be produced, treat the house as un-remediated and test it yourself before closing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "The seller agreed to mitigate but wants to use their own contractor. Is that a problem?", "answer": "The seller using their own contractor isn't inherently a problem, but you should make sure the contractor is licensed and certified, and you should have a right to see the post-mitigation test result before closing. If the seller's contractor isn't properly certified or the post-mitigation test is done improperly, you're not protected. Build review of the installer's credentials and the test result into your closing conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "The seller mitigated but won't share the post-mitigation test report. What should I do?", "answer": "That's a serious red flag. A seller who won't share the post-mitigation test has either not done one or doesn't like the result. Either way, that's not something you should accept. Make access to the full post-mitigation test report a non-negotiable condition. If they refuse, conduct your own independent test before closing and evaluate from there.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "Is it standard to ask sellers to pay for both mitigation and the post-mitigation test?", "answer": "Yes, that's a reasonable request when negotiating mitigation as a condition of sale. The post-mitigation test is the verification that the work was done correctly, so it should be part of the same scope. Some sellers push back, but it's not an unusual request. The test cost is modest relative to the mitigation cost and relative to the purchase price.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "What's the difference between an alpha track detector and a charcoal canister for radon testing?", "answer": "Both are passive short-term testing devices used by certified professionals. Charcoal canisters are the most common for real estate transactions - they collect radon over 48-96 hours and are sent to a lab for analysis. Alpha track detectors are typically used for long-term tests of 90 days or more and don't need lab analysis of charcoal - they track actual particle hits on a film. For a real estate transaction, the charcoal canister or an electronic continuous monitor is the standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "What is a continuous radon monitor and is it better than a charcoal canister?", "answer": "A continuous electronic radon monitor takes readings throughout the test period - typically hour by hour - and produces a log of data along with an average. This lets you see whether closed-house conditions were maintained and whether the readings were stable or spiked. A charcoal canister gives only the averaged result. For real estate purposes, continuous monitors provide more transparency, which some buyers prefer. Both are acceptable methods when conducted by a certified professional.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "Can I buy my own radon test kit before making an offer to get an idea of what I'm dealing with?", "answer": "You can use a consumer test kit to get a ballpark reading, but keep in mind it won't be the official real estate transaction test - you'll still need a certified professional for that. A consumer kit might help you decide whether to pursue a property further or what to expect going into the inspection period. Just don't use it as the transaction test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "My friend says if a house has radon, that means the soil is contaminated and you should never buy it.", "answer": "That's not how radon works. Radon is a naturally occurring gas produced by uranium and radium in soil and rock - it's in the ground everywhere, in varying amounts. It's not contamination in the sense of industrial pollution. Having elevated radon in a house means the specific conditions of that house allowed radon to accumulate, which is fixable. The soil doesn't need to be removed or remediated - the house just needs a mitigation system. Radon is not a reason to write off an otherwise good property.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "Someone told me radon is just a scam by mitigation companies. Is that true?", "answer": "Radon is a well-established health hazard, backed by decades of research and endorsed by the EPA, CDC, the Surgeon General, and virtually every major public health organization. It's the second leading cause of lung cancer in the United States. The fact that companies profit from mitigation doesn't make the underlying science a scam - that logic could be applied to any industry. Test your house, know your number, and make decisions based on real data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "Does radon go away on its own if you open windows and ventilate a lot?", "answer": "Ventilating does reduce radon levels while you're ventilating - open windows create air flow that dilutes and displaces soil gas. But once you close up the house again, levels reaccumulate. You can't fix a radon problem with windows. A mitigation system creates a permanent pressure difference that continuously draws soil gas out before it enters the house, which is why it works when ventilation doesn't.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "My realtor says painting the basement floor will seal out radon. Is that true?", "answer": "No. Radon paint or sealant products can slow radon entry through small pores in concrete slightly, but they don't seal cracks, pipe penetrations, or floor-wall joints effectively. They're not a meaningful substitute for sub-slab depressurization. A mitigation system works because it changes the pressure relationship between the sub-slab soil and the house, not because it physically seals every entry point. Don't let someone sell you paint as a radon solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "Is radon a problem in summer or only in winter?", "answer": "Radon is a year-round issue. Levels tend to be somewhat higher in winter when homes are more tightly closed, but elevated radon in summer is a real and common finding. The mitigation system runs year-round for exactly that reason. Don't assume a summer test is automatically going to be lower or that radon is only a cold-weather concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "My neighbor said they bought a radon fan at the hardware store and installed it themselves. Does that work?", "answer": "The fan alone doesn't make a mitigation system - you also need proper slab penetration, correct pipe sizing, appropriate exhaust routing above the roofline, and an assessment of the foundation geometry to know how many suction points are needed. DIY installation without proper training and testing can look functional while doing nothing or even making pressure dynamics worse in some cases. Post-mitigation testing is critical to confirm the system actually works. A certified installer with a post-mitigation test is the path to confidence.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "I've heard that granite countertops cause radon. Does that affect home radon levels significantly?", "answer": "Some granite countertops do emit small amounts of radon, but the contribution to whole-home radon levels is typically negligible compared to radon entering from the soil through the foundation. The primary radon source in virtually all residential radon problems is sub-slab soil gas. If a home has elevated radon, the granite countertops aren't the culprit in any meaningful way.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "My water comes from a well. Does that add to my radon problem?", "answer": "Water from private wells can contain dissolved radon, which is released into the air when the water is used - in showers, dishwashers, washing machines. In most cases, waterborne radon is a secondary contributor compared to soil gas radon, but in homes with very high well-water radon, it can be a meaningful fraction of total exposure. If your home has an elevated radon level and uses well water, it's worth having the water tested separately and addressing both sources if both are elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "Can plants or houseplants help reduce radon?", "answer": "No. Plants don't meaningfully absorb or neutralize radon. The idea comes from general indoor air quality research on plants filtering VOCs, which doesn't translate to radioactive gases. Radon reduction requires changing the pressure dynamics of the house relative to the sub-slab, which plants have no ability to do.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "Does running the bathroom fan or kitchen exhaust fan help with radon?", "answer": "Exhaust fans that vent to the outside reduce indoor air pressure, which can actually increase radon entry from the soil by increasing the pressure differential that draws soil gas in. It's counterproductive in high-radon situations. This is another reason ventilation-based thinking doesn't solve radon - the interaction between house pressure and soil pressure is more complex than just running fans.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "I heard you can test radon with a smartphone app. Is that real?", "answer": "No legitimate smartphone app can detect radon. Radon is a radioactive gas requiring specialized detection technology - alpha-particle detectors, charcoal adsorption, or precision electronic sensors. No smartphone has these sensors. Apps claiming to test radon are not doing what they claim. Use a certified device operated by a certified professional.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "My seller's agent said radon levels in this neighborhood have been tested and the area is low. Does that mean my house is low too?", "answer": "No. Radon is highly localized - it depends on the specific sub-slab conditions, foundation construction, and soil directly under each individual house. A neighborhood survey or aggregate data tells you nothing reliable about a specific property. Test the house you're buying. That's the only data point that matters for your decision.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "I'm buying a duplex and I'll be living on the lower unit. Does radon testing apply?", "answer": "Yes, definitely. Lower-level units with basement or slab contact are exactly the scenario where radon is most relevant. Test the lower unit you'll be living in. Mitigation in a duplex or small multi-unit building is fully doable - it's a somewhat more complex conversation because you may need to work with the other unit owner depending on where the foundation work needs to happen, but it's not unusual.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "Does radon only matter for the basement level or should I test the whole house?", "answer": "The standard test is at the lowest livable level - typically the basement. That's where radon enters and accumulates most. Upper floors generally have lower levels. The basement test is the decision-making number. If you have a finished basement used as living space, that's your primary concern. Upper-floor testing is useful additional information but not the standard for a purchase decision.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "Does an HVAC system spread radon throughout the house?", "answer": "Forced-air HVAC systems can circulate basement air to upper floors, which can distribute radon that enters at the basement level more broadly through the house. Conversely, some HVAC configurations create pressure differences that affect how much radon enters. The interaction is complex and home-specific. The bottom line is that elevated basement radon is a whole-house concern, not just a basement issue.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Negotiating and Contingencies", "question": "My inspector said the radon device needs to be placed at least 20 inches off the floor. Why?", "answer": "That's standard placement protocol - the device should be off the floor to avoid measuring localized soil emanation directly at floor level and to better represent breathing-zone air. Placement guidelines also specify distance from windows, exterior walls, and high-humidity areas. These protocols exist to make results comparable and reproducible. An inspector following those guidelines is doing it right.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "I found out after accepting an offer that the house is in a Zone 1 area on the EPA map. Should I back out?", "answer": "Zone 1 just means the EPA predicts average indoor radon levels in that county are above 4.0 pCi/L based on geological and measured data. It's not a warranty that this specific house is elevated. It does mean you should absolutely test - but you should test any house regardless of zone. Don't back out based on the map; get the actual test result and make your decision from real data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-buyer-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "Should I tell my mortgage lender about the radon result?", "answer": "Lenders generally aren't directly involved in radon decisions the way they are with structural issues or certain environmental hazards. However, if the seller is doing mitigation as a condition of sale, that work and its completion may need to be documented as part of the closing process. Talk to your lender about how any required remediation needs to be handled in the closing documentation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The house has a sump pump in the basement. Does that affect radon?", "answer": "Sump pits can be entry points for radon because they open directly to the sub-slab or soil. A sump pit with an unsealed cover or no cover at all can contribute significantly to radon levels. In mitigation, the sump pit often needs to be capped and incorporated into the depressurization system. If the house has a sump pump, make sure the mitigator knows about it - it's a meaningful part of the assessment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "Can I buy the house and just seal the cracks in the basement myself? Would that fix radon?", "answer": "Sealing cracks helps reduce entry points, but it's rarely sufficient as a standalone solution for meaningful radon reduction. The pressure difference between the sub-slab soil and the house interior drives radon through whatever openings exist - seal some and it finds others. Active sub-slab depressurization changes the pressure dynamic itself rather than trying to physically block every entry point. DIY crack sealing is a supplement, not a fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The neighbor told me the street has a lot of radon because there's a limestone quarry nearby. Is that true?", "answer": "Limestone geology can be associated with radon because uranium and radium concentrations vary by rock type. It's plausible that the local geology contributes to radon potential in the area. Even so, the presence of a quarry nearby doesn't tell you what's happening in any specific house - the only way to know your house's level is to test it. The neighbor's information is context, not a measurement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "My whole family is going to see the house tomorrow. Is it safe to be in a high-radon house for a few hours?", "answer": "Yes. Radon is a long-term cumulative risk, not an acute hazard from a single visit. Spending a few hours in a house - even one with elevated radon - does not create meaningful health risk from that single exposure. The concern with radon is years of daily exposure, not a one-time visit. Walk through, see the house, make your decision, and worry about the radon level after you have actual test results.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The house we want to buy is above a limestone cave system. Is radon a concern?", "answer": "Areas with cave systems and karst geology can have elevated radon potential because of the rock composition and the connections between subsurface voids and buildings. It's worth being thoughtful about testing in that context. Test the house thoroughly, and if levels are elevated, a mitigator should assess whether the cave system affects the mitigation design.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "My real estate agent said they've sold hundreds of homes and never seen radon cause a deal to fall through. Is radon really that negotiable?", "answer": "Radon is very negotiable because it's fixable. Most deals involving elevated radon don't fall through - they result in mitigation or a credit, and everyone moves on. The reason deals do fall apart over radon is usually seller intransigence or a buyer who loses confidence in the transaction overall. The radon itself is almost never the insurmountable obstacle.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "Can I put a monitor in the house the night before closing to check radon one last time?", "answer": "A consumer monitor running for one night wouldn't produce a statistically reliable result and wouldn't be meaningful for a last-minute assessment. If you want a closing check on the radon system's function, verify the manometer is showing suction and consider scheduling a short-term test shortly after closing. The pre-closing period is too compressed for a meaningful last-minute test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The house we want is perfect in every way except for the 5.5 pCi/L radon reading. Is it worth it?", "answer": "That's entirely your call, and honestly, a fixable radon issue shouldn't by itself rule out an otherwise great house. 5.5 pCi/L with a properly installed mitigation system will typically drop to 1.0 pCi/L or below. Get a mitigation credit or require mitigation before closing, confirm the post-mitigation result, and enjoy your house. People mitigate at 5.5 every day - it's a very normal outcome. Call or text Bill and we can walk through what that process looks like for the specific house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "My uncle says radon is a government scare tactic. How do I have a real conversation with him about this?", "answer": "Radon's danger is supported by independent research from multiple countries, long-term epidemiological studies, and findings by organizations with no financial stake in mitigation - including the National Cancer Institute, the WHO, and public health agencies worldwide. The US Surgeon General has issued formal advisories on radon. The research isn't unique to any one government or political agenda. The best approach with a skeptical family member is usually to share the Surgeon General's advisory and let the independent body of evidence make the case.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "We're buying a house with a dog and two cats. Will the radon system affect our pets?", "answer": "No. A mitigation system doesn't change indoor air in any way that affects pets. It draws sub-slab air out and exhausts it above the roofline - the inside of the house is unaffected other than having lower radon levels. Your pets will be healthier in a lower-radon environment just as your family will be.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "How soon after the mitigation system is installed can I get a reliable post-mitigation test?", "answer": "The minimum waiting period before a post-mitigation test is typically 24 hours, but many professionals prefer 30 days for the sub-slab pressure field to stabilize fully and for a more representative reading. For a real estate transaction with a tight timeline, a 48-hour post-mitigation test is commonly used. For the most accurate verification of long-term performance, a 30-day or 90-day test after you've moved in is the gold standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "Do I need to tell my homeowner's insurance about the radon mitigation system?", "answer": "It's generally worth mentioning any significant installation to your homeowner's insurance provider, though radon mitigation systems aren't typically a coverage concern or premium driver. Some policies may cover damage caused by the system (unlikely) or exclude certain scenarios. It's a quick phone call to your agent to confirm, and the answer is almost always that it has no effect on your policy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "I'm buying a vacation property in Michigan. Should I worry about radon there?", "answer": "Michigan has elevated radon potential in many areas, particularly the Upper Peninsula and parts of the Lower Peninsula. Vacation properties are often left closed for extended periods, which can allow radon to accumulate. Test it the same as a primary residence. If you plan to spend significant time there - weeks or months per year - the cumulative exposure is real and worth managing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "My parents are in their 70s and buying a retirement home. Does radon matter as much for older people?", "answer": "The risk from radon is cumulative over a lifetime, and while lung cancer risk from new exposure does take time to develop, it still accumulates. Older adults with prior smoking history are particularly vulnerable to radon's additive effect on lung cancer risk. For older buyers, I wouldn't dismiss radon as not worth addressing - a mitigation system is a straightforward investment in the quality of the air they breathe daily.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "I'm buying a foreclosure and it's been vacant for two years. Does that affect the radon reading?", "answer": "A vacant house where windows may have been left cracked open, where heating and cooling weren't running normally, and where normal occupancy patterns didn't exist can produce a different radon reading than the same house under lived-in conditions. Make sure the test is conducted under proper closed-house conditions - 12 hours of closed-house conditions before the test begins, windows and exterior doors closed throughout. The vacancy history makes it more important to follow protocol carefully, not less.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The listing agent said the home was \"tested for radon by the municipality.\" Does that mean it passed?", "answer": "This claim is unusual - municipalities don't typically test individual homes for radon. This may be a misunderstanding, a reference to some kind of local program, or simply inaccurate. Ask for the actual test documentation. If they can't produce a report from a certified professional with a specific device, date, and result, treat the home as un-tested and conduct your own test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "We're buying a house that was recently renovated. The basement was opened up significantly. Does renovation affect radon?", "answer": "Renovation can both improve and worsen radon situations depending on what was done. Opening up the basement, adding sump pits, creating new floor penetrations, or installing radiant floor heating can change how soil gas enters the house. If significant basement work was done, don't rely on any pre-renovation radon test - get a fresh test under current conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "Is it common for buyers in Illinois to require radon mitigation as a purchase condition?", "answer": "Yes, it's very common. In Illinois, radon testing is a standard part of the home inspection process, and buyers negotiating mitigation as a condition of sale is routine - especially in the collar counties around Chicago and other high-radon regions. Sellers in these markets are generally familiar with the process and expect to address it when levels are elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "Does radon affect the appraisal of a house?", "answer": "Radon generally doesn't directly affect a lender's appraisal in most cases. Appraisers evaluate comparable sales and physical condition - a mitigation system typically doesn't significantly change appraised value up or down. However, if elevated radon affects the negotiated sale price or conditions, that influences the transaction. In high-radon markets, buyers and sellers factor mitigation into the deal without it becoming an appraisal issue.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "I was told the house I'm buying is in a 100-year floodplain. Does that make radon worse?", "answer": "Floodplain designation is about water risk, not radon risk. Radon depends on sub-slab soil composition and pressure dynamics, not proximity to water tables per se. A home in a floodplain can have high or low radon independently of its flood risk. Test the house and get a real number - the flood and radon questions are separate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "How do I explain radon to my spouse who thinks I'm overreacting about the 4.2 reading?", "answer": "Radon is the second leading cause of lung cancer in the United States - about 21,000 deaths per year, according to the EPA and Surgeon General. The EPA action level is 4.0 pCi/L, and 4.2 is above it. The good news is that you're not overreacting, and you're also not facing an unsolvable problem - mitigation works reliably. The reaction isn't \"panic,\" it's \"fix it.\" That's a very reasonable position to hold, and it's exactly what the EPA and public health community recommend.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "My future mother-in-law says we should've tested for radon before making the offer so we had more leverage. Is she right?", "answer": "She has a point that knowing the radon level before making an offer gives you more information. However, most buyers test during the inspection period after the offer is accepted - that's standard. The contingency gives you leverage at that point. Some buyers do pre-offer testing, particularly for homes they're very serious about, but it requires seller permission and doesn't fit every transaction timeline. Your inspection period contingency is the standard lever.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "Is there anything I should do to prepare the house for the radon test?", "answer": "Closed-house conditions need to be maintained for at least 12 hours before the test starts and throughout the 48-hour test period. That means keeping windows and exterior doors closed except for normal entry and exit. Avoid running attic fans, whole-house fans, or anything that draws outside air in. The test company should provide clear instructions - make sure the seller (or seller's agent) is aware of and following these conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "We didn't ask for a radon test and now we're two days from closing. Is there any point?", "answer": "A 48-hour test with proper closed-house conditions can still technically be done on a very compressed timeline, but coordinating it, getting results, and doing anything meaningful with those results in two days is extremely difficult. At this point, if you're committed to buying, plan to test immediately after closing and budget for mitigation if needed. Going forward, build radon testing into your inspection timeline from the start. If you want to talk through what to expect post-closing, fill out the form on the website or give us a call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "My real estate agent says they always recommend radon testing and it's never come back above 4.0 in this neighborhood. Should I trust that?", "answer": "An agent's anecdotal experience with a neighborhood is not the same as data. They may have done a handful of deals in that area and gotten lucky with the results, or they may be misremembering, or several of those deals may have come in close to 4.0 without them flagging it. Get the test. Anecdote is not measurement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "What should the radon test report include when I get results back?", "answer": "A complete test report should include: the name and certification number of the testing professional, the testing company, the date and time the device was placed and retrieved, the specific location in the home where it was placed (room, floor), the test device type and ID number, and the result in pCi/L. If any conditions were unusual (power outage during test, HVAC issue, etc.), those should be noted. If the report you receive is just a number on a sticky note, that's not a legitimate report.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The house I'm buying has both a basement and a sunroom addition on a slab. Does the addition need separate radon consideration?", "answer": "Yes. The slab under the addition is another soil-contact area that can be a radon entry point. Whether the addition is isolated from the main house (separate room) or integrated affects how the radon from that area circulates. If mitigation is needed, the mitigator should assess both the basement and the addition and design accordingly. Single-point mitigation in the basement may not address elevated entry through the addition slab.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "I'm buying from an estate - the previous owner died and no one has lived there for a year. Is the radon test still valid for a property like that?", "answer": "Vacant homes can produce different short-term test results because closed-house conditions haven't been maintained normally. It's important that the testing protocol is followed carefully - 12 hours of closed-house conditions before the test starts, and maintaining closed conditions throughout. The estate situation doesn't change the testing approach, it just means you need to confirm protocol was followed. Get the result from a certified professional and verify the procedure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The house we're buying has a concrete block basement. Does that type of foundation let in more radon?", "answer": "Concrete block foundations have hollow cores and mortar joints that can allow radon to pass through more easily than poured concrete. They're generally considered a higher radon-entry-risk foundation type than poured concrete. That doesn't warranty elevated levels, but it's worth factoring in. If levels are elevated, mitigation of a block wall foundation may need to address the walls themselves in addition to sub-slab depressurization.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-buyer-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "What's the lowest radon level I've seen a mitigated home achieve?", "answer": "Post-mitigation results below 0.5 pCi/L aren't uncommon in well-designed systems with good sub-slab communication. The goal is always to get as low as reasonably achievable - not just to squeak under 4.0. A well-installed system in a favorable sub-slab condition can achieve very dramatic reductions even from high starting points. The post-mitigation test is what tells you where you've landed, which is why it's non-negotiable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The house tested at 1.9 pCi/L. Should I still do anything?", "answer": "1.9 pCi/L is below the EPA's 2.0 pCi/L threshold for even considering mitigation. For most buyers, this is a comfortable result that doesn't require any action. The EPA considers levels below 2.0 pCi/L to be in the range where risk is very low relative to typical indoor environmental factors. You're not getting a zero-risk warranty at any level, but 1.9 is a good result. Keep it in mind and consider retesting every couple of years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-buyer-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The basement tested at 4.1 and the main floor at 1.3. My agent says just live on the first floor. Is that real advice?", "answer": "That's not practical advice for most families, and it doesn't address the problem. Radon from the basement circulates into the rest of the house through HVAC systems and natural air movement. Living on the first floor reduces your exposure compared to living in the basement, but the 4.1 pCi/L in the basement is still affecting your overall indoor air. Mitigate the basement - that reduces levels throughout the house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "If a house has tested between 2.0 and 4.0 every time it's been tested, is that a pattern I should worry about?", "answer": "Repeated readings in the 2-4 range tell you the house has a consistent moderate radon level. The EPA says that range warrants consideration of mitigation even though it's below the action level. If you plan to spend a lot of time in the basement or lower levels, or if family members have lung cancer risk factors, I'd consider mitigating even at the high end of that range. It's not a mandate, but it's a reasonable choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The test came back at 8.4 pCi/L. That's more than double the EPA level. How worried should I be?", "answer": "8.4 pCi/L is a reading that definitely needs mitigation, but it's not a reason to panic about the house itself. Readings in the 8-15 range are fixable with standard sub-slab depressurization. In many cases, higher starting levels actually produce the most dramatic reductions post-mitigation because the system has a lot of soil gas pressure to work against. Make mitigation a firm condition, get the post-mitigation test, and move forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "We got two test results - one said 4.1 and one said 3.8. They were done at the same time. Which one is right?", "answer": "Variation between two simultaneously run devices isn't unusual - short-term radon tests have inherent variability, and device placement, even a few feet apart, can produce different readings. If both results were produced by certified devices following protocol, the average of the two is a reasonable working number. In this case, your average is right at 4.0 - which puts you at the EPA action level. Treat it accordingly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The test result is 3.2 pCi/L and everyone is telling me something different. My realtor says it's fine, my brother-in-law who's an EMT says it's dangerous, and my mom says to walk away. Who's right?", "answer": "None of them are completely right. At 3.2 pCi/L you're below the EPA action level, so your realtor is technically correct that no EPA-mandated action is required. Your brother-in-law is right that it's not zero risk - the EPA explicitly says 2.0-4.0 carries lower but real risk. Your mom's reaction to walk away is an overreaction - 3.2 is a very manageable number. The question is whether you want to mitigate now, plan to do it after moving in, or monitor it. All three are defensible choices at 3.2.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "What does it mean when the radon report shows a \"WL\" measurement instead of pCi/L?", "answer": "WL stands for Working Level, which is an older unit of measurement for radon decay product concentration. 1 WL is roughly equivalent to 200 pCi/L of radon in equilibrium. Modern real estate radon testing almost universally reports in pCi/L, so if you're seeing WL on a recent report, ask the testing company to clarify how that converts and confirm which standard was used.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The test report shows \"4.2 pCi/L ± 0.8.\" What does the plus/minus mean?", "answer": "The ± figure is the measurement uncertainty - it tells you the result could reasonably be anywhere from 3.4 to 5.0 pCi/L given the inherent variability in the testing method. For real estate purposes, the stated value of 4.2 is what's used for decision-making. Knowing the uncertainty range is useful context - at the low end you're near the action threshold, at the high end you're clearly above it. It's another reason not to treat results as perfectly precise numbers.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "My test result says \"less than detection limit.\" What does that mean and is the house fine?", "answer": "Below detection limit means the radon level was so low it fell under the minimum the device can reliably measure - typically well below 0.4 pCi/L. In practical terms, this is an excellent result and means radon is essentially a non-issue for this house at this time. You won't get a result of zero, but below detection limit is as good as it gets.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Miscellaneous Buyer Scenarios", "question": "The test came back at 5.8. I asked my mitigator and they said they've gotten houses from 12 down to 0.8. Should I believe that?", "answer": "Yes, those kinds of reductions are very real and very common with properly designed sub-slab depressurization systems. 5.8 pCi/L is a level where a competent mitigator should be able to achieve post-mitigation results below 2.0 pCi/L routinely, and often much lower. The key is proper assessment of the sub-slab conditions, correct fan sizing, and adequate suction points. Post-mitigation testing is what confirms it actually worked.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon Contingencies and Contract Mechanics", "question": "Can I use the radon result as a reason to renegotiate the price even if I plan to buy regardless?", "answer": "Yes, but you need the contractual right to do so, which comes from a radon contingency. If your contingency gives you the right to request mitigation or a credit when levels are above 4.0, then a 5.0 result is your leverage point. If you've already waived the contingency, you've reduced your leverage significantly. Always connect your negotiating position to specific contract rights.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon Contingencies and Contract Mechanics", "question": "I moved in two months ago. When should I do my first full long-term radon test?", "answer": "A 90-day long-term test started within your first few months of occupancy is ideal. It captures different seasons and occupancy patterns and gives you a more reliable annual average than a 48-hour test. If a short-term test was done at purchase and showed acceptable levels, the long-term test is your verification and baseline. If levels come back notably higher than the purchase test, it's worth investigating why.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon Contingencies and Contract Mechanics", "question": "We just had mitigation done and the post-test came back at 1.2. Should I keep testing?", "answer": "1.2 pCi/L is an excellent post-mitigation result. The EPA recommends retesting every two years even with a working system, so plan a follow-up test around your two-year mark. In the meantime, check the manometer periodically to confirm the fan is still creating suction. If you want ongoing visibility, a consumer continuous monitor in the basement can give you peace of mind between formal tests.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon Contingencies and Contract Mechanics", "question": "My new house has a radon mitigation system and the post-mitigation test from the previous owner shows 0.6 pCi/L. Do I need to do anything?", "answer": "That's a very good result. The previous owner's post-mitigation test is useful context, but given that you don't know exactly when it was done or the current system status, retesting within your first year of ownership is a reasonable step. Verify the manometer shows suction, get a 48-hour or 90-day test done, and confirm the system is still performing. If it comes back near 0.6, you're in great shape.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon Contingencies and Contract Mechanics", "question": "Is it normal for radon to spike briefly and then go back down? My new continuous monitor shows big swings.", "answer": "Yes. Radon levels fluctuate with weather pressure, wind direction, temperature differentials, and occupancy patterns. A continuous monitor will show day-to-day and even hour-to-hour variation. What matters for long-term health risk is the average over time, not any single spike. If your average over several weeks is consistently below 4.0 pCi/L - and ideally below 2.0 - you're in good shape. Occasional spikes above those thresholds in a generally low-radon home are less concerning than a sustained average above them.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon Contingencies and Contract Mechanics", "question": "The previous owners had the mitigation system serviced every year. Should I keep doing that?", "answer": "Annual professional servicing isn't typically required - the systems are simple and don't need routine professional maintenance the way an HVAC system does. What you should do is check the manometer periodically (monthly is fine), retest radon levels every two years, and have a professional inspect it if you notice anything unusual. When the fan motor eventually wears out, that's when you'd call a mitigator to replace it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon Contingencies and Contract Mechanics", "question": "I want to finish my basement. Will that affect the radon mitigation system?", "answer": "Finishing a basement can affect mitigation if you're sealing off access to the suction point, running new floor penetrations for plumbing or electrical, or adding interior drainage. Before finishing, talk to a state licensed radon mitigation professional about your plans so the system can be maintained, accessed for future inspection, and not inadvertently compromised. A small amount of planning before the renovation can prevent a bigger headache after.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon Contingencies and Contract Mechanics", "question": "I'm pregnant and just found out our house has 6.0 pCi/L. We've lived here six months. What do I do?", "answer": "Get mitigation scheduled immediately - don't wait. For personal health concerns related to your pregnancy, talk to your OB right away. Radon is a long-term risk mechanism and there's no acute emergency from six months of exposure, but you want to stop future accumulation as quickly as possible. A mitigation system can typically be installed within a few weeks of scheduling. For medical guidance specific to your situation, your doctor is the right resource.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon Contingencies and Contract Mechanics", "question": "We tested the house after moving in and the result is higher than the purchase test. What could cause that?", "answer": "Several things can produce different results between tests: seasonal variation (winter readings tend to be higher), different closed-house conditions during the test, different device placement, or changes to the house (renovation work, new penetrations, HVAC modifications). The post-move-in test also reflects how the house operates under your occupancy patterns. If the difference is significant and the new result is above 4.0, treat it as a new actionable finding and contact a mitigator.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon Contingencies and Contract Mechanics", "question": "How often should I replace the fan in my mitigation system?", "answer": "Radon mitigation fan motors typically last 5 to 10 years, sometimes longer. There's no set replacement schedule - you replace the fan when it fails, becomes noisy, or a post-mitigation test shows levels have risen significantly despite the system appearing to run. Some homeowners do proactive replacement around the 10-year mark. The fan is the heart of the system; when it stops working effectively, radon levels will climb.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Radon Contingencies and Contract Mechanics", "question": "I want to add a bathroom in the basement. Do I need to talk to the radon mitigator first?", "answer": "Yes. Adding a bathroom involves cutting into the slab for drain lines, which creates new potential radon entry points. If you have a mitigation system, those new penetrations should be sealed properly and the system assessed afterward to confirm it's still depressurizing effectively. A post-renovation radon test is a good idea after any significant basement work. Loop in your mitigator before and after the project.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "I'm a first-time buyer and I'm already stressed about everything. Is radon one more thing I really need to worry about?", "answer": "I understand the feeling - there's a lot to track when you're buying a house. But radon is genuinely important, and the good news is that it's also genuinely simple. Test it, know the number, and if it's above 4.0, get it fixed. That's the whole process. It's not complicated once you have the information. Don't let it add unnecessary stress, but don't skip it either.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "My parents bought houses for 30 years and never tested for radon. Does that mean it wasn't a thing back then?", "answer": "Radon awareness has grown significantly since the EPA started a national radon action program in the late 1980s after the Stanley Watras incident in Pennsylvania. In the 1970s and early 1980s, radon wasn't routinely tested in home purchases. Your parents' generation largely didn't test - that doesn't mean radon wasn't there, it just means they didn't know about it. Testing norms are much more established now, and you're doing the right thing by asking.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "How do I explain to the seller why I want to test for radon? They seem offended.", "answer": "Radon testing isn't a personal accusation - it's a standard part of home purchasing in Illinois. You can simply say that radon testing is something you do as a matter of course on any home you consider buying, because it's a well-documented health consideration and it's very common in this region. A seller who's offended by a standard test is unusual; most sellers in Illinois understand it's routine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "I didn't realize radon was important until I read about it last night. I already signed the purchase agreement. What do I do?", "answer": "Check your purchase agreement for an inspection contingency and whether it includes radon or allows you to add it. In many standard Illinois purchase agreements, inspection addenda allow for radon testing. Call your real estate agent today and ask how radon testing can be incorporated into your inspection timeline. You likely have more flexibility than you think if you're still within the inspection period.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "If I test and the radon comes back fine, can I just forget about it going forward?", "answer": "A one-time good result is genuinely reassuring, but it's not permanent. The EPA recommends retesting every two years because radon levels can change as the house settles, the foundation shifts, or soil conditions around the house evolve. The result you get today is your baseline, not a lifetime pass. Set a reminder for two years out to test again.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "What's the most important thing a first-time buyer should know about radon?", "answer": "Test the house during your inspection period, before you close. Know the number. If it's at or above 4.0 pCi/L, make mitigation a condition of the sale. If it's between 2.0 and 4.0, you have a decision to make and it's worth taking seriously. If it's below 2.0, great - retest in a couple of years. The whole thing is manageable as long as you don't skip the test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "I keep hearing \"sub-slab depressurization\" - what does that actually mean in plain English?", "answer": "It means the contractor drills a hole through the basement floor, puts a pipe in it, and attaches a fan to the other end of the pipe. The fan sucks air out from under the slab continuously. Because the fan is pulling air out faster than radon can push in, the pressure under the slab stays negative relative to the house - so instead of radon seeping up through cracks, it gets sucked away and exhausted outside through the pipe. Simple idea, very effective execution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "My agent keeps calling it a \"radon pipe\" - is that the same as a mitigation system?", "answer": "The \"radon pipe\" is the visible part of the system - the PVC pipe that runs from the slab penetration up through the house and out above the roofline. The full system includes the pipe, the fan (usually mounted in the attic or exterior), and any sub-slab work. When people say \"radon pipe\" they usually mean there's a mitigation system installed, but confirm whether the fan is actually connected and running - a pipe without a fan is just a passive system that may or may not be effective.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "I'm buying a townhouse. The neighbors share walls - does their radon affect me?", "answer": "Radon doesn't typically migrate significantly through shared walls between attached units, because radon enters through foundation contact with soil rather than through wall-to-wall transmission. Each unit should be tested independently based on its own foundation conditions. End units and lower-level units are more relevant to test; upper-floor units in a multi-story townhouse have less concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "The house I'm looking at is being sold by a builder who says all their homes are \"radon resistant.\" What questions should I ask?", "answer": "Ask specifically: does \"radon resistant\" mean RRNC (Radon-Resistant New Construction) per EPA guidelines, and if so, what specific features were included? Is there a passive sub-slab vent pipe? Is there a conduit or junction box for easy fan addition? Has the home been tested since construction? \"Radon resistant\" without specifics is a marketing claim; RRNC is a construction standard. Then test it regardless of the answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "Is radon more of an issue in certain types of soil?", "answer": "Yes. Soils with higher uranium and radium content produce more radon. Granitic soils, phosphatic soils, and certain glacial deposits tend to be higher radon producers. Clay-heavy soils can trap radon close to the surface, while sandy soils may allow it to dissipate. Illinois's glacial till geology is one reason the state has elevated radon potential broadly. But soil type alone doesn't determine what any specific house will test at - construction matters too.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "My aunt says the radon test is just a way for inspectors to make extra money. Is there any truth to that?", "answer": "Radon testing is a legitimate and well-established practice with a strong scientific basis. Does an inspector make money doing the test? Yes - like any service. But that doesn't make the service unnecessary. The public health case for radon testing is built on decades of independent research, not industry self-interest. The EPA, WHO, and Surgeon General all recommend it. Your aunt's skepticism about business motives doesn't change the underlying epidemiology.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "The house is on a street with a lot of oak and pine trees. Does that affect radon?", "answer": "Tree cover and landscaping don't meaningfully affect indoor radon levels. Radon comes from the soil under the foundation, not from surface vegetation or trees. This is a common misconception - people sometimes assume that trees or \"natural\" surroundings affect air quality in ways that include radon. The geology and foundation are what matter.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "My inspector told me they test 200 houses a year and this one is probably fine. Is that a valid opinion?", "answer": "An inspector's general experience and intuition is no substitute for a test. Even an experienced inspector who has tested hundreds of homes can't predict what a specific house will test at without actually running the test. The whole point of testing is to get an actual measurement, not a gut feeling. Run the test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "I want to buy a house where the basement will be my primary workspace - I work from home all day. Does radon level matter more for that situation?", "answer": "Yes, significantly. Occupancy hours drive cumulative exposure. If you're spending 8-10 hours a day in a basement workspace, your annual exposure is dramatically higher than someone who walks through the basement occasionally. For a home office in the basement, I'd strongly consider mitigating even at levels in the 2.0-4.0 pCi/L range. The math on cumulative exposure changes when you're down there all day, every day.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "What's the right order of operations: make an offer, then test? Or test, then offer?", "answer": "The standard order is: make an offer with inspection and radon contingencies, then test during the inspection period. Testing before making an offer is possible but requires seller permission, adds time and cost before you know if the deal is even viable, and isn't necessary given that contingencies protect you. The contingency is your contractual right to address radon after the test result comes in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "The listing has been on the market for 120 days. My agent says it might be because of radon. Should I ask about that?", "answer": "You can certainly ask if there's a prior radon test on file as part of your due diligence - any seller should be willing to share documented test history. A long time on market can have many explanations, radon being one possibility. If a previous buyer tested and found elevated levels and then withdrew, you'd want to know that before putting an offer in. Even so, if the result was elevated and the seller is now disclosing it or offering to mitigate, a formerly \"problematic\" house that's now been addressed can be a good deal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "The house I'm buying had radon mitigation done two years ago and then sat vacant for 18 months. Should I be worried the system didn't maintain itself during vacancy?", "answer": "A properly installed mitigation system runs continuously on its own and doesn't require the house to be occupied to function. Vacancy doesn't degrade the system - the fan keeps running, maintaining sub-slab depressurization whether anyone is home or not. The main thing to verify is that the fan is still operating (check the manometer) and that the post-vacancy radon levels match the post-mitigation test result from two years ago. A quick current test confirms everything.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "Can I ask to see the radon mitigation design plan before closing?", "answer": "Yes, and it's a reasonable thing to request. A licensed radon mitigation professional should be able to provide documentation of what was installed - number of suction points, fan model and specs, pipe routing, and any sealing work done. You're buying a house with a system in it; you should understand what that system is. If the seller can't provide any documentation of the installation, that's a flag.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-buyer-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "What's the fastest a legitimate radon mitigation job can be completed from start to finish?", "answer": "If a contractor is available, installation can happen in one day. Then the post-mitigation test needs at least 24-48 hours to run. Lab processing for a charcoal test adds another day or two. Realistically, from installation to verified results you're looking at 4-6 days minimum. That's tight but doable if your closing timeline has that window.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "The house has been on the market for six months and the seller just dropped the price significantly. My agent says ask about radon before making an offer.", "answer": "Smart advice from your agent. A long-listing-period price drop can have any number of causes, but elevated radon is one that sometimes creates a difficult negotiating dynamic for sellers. Ask if there's an existing radon test on file. If there is and it shows high levels, you now know why the price dropped and what you'll need to budget for mitigation. That's actually useful information - a discounted house with a known, fixable radon issue can be a good buy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "If I mitigate before I've even moved in, is that overkill?", "answer": "It's not overkill at all - it's actually ideal. Getting the system installed and post-mitigation test completed before occupancy means you move into a house with confirmed low radon levels. You don't have to think about it, schedule contractors while you're living there, or worry about elevated exposure during the transition period. If you're doing mitigation anyway, doing it before you move in is the cleanest possible outcome.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "My home inspector told me radon is \"just another thing inspectors test for to make money.\" That surprised me. Is radon testing really necessary?", "answer": "That's a surprisingly cynical take from an inspector. Radon is endorsed by the EPA, the Surgeon General, the CDC, and the WHO as a serious and preventable health hazard. Whether a particular inspector believes in it has no bearing on whether it matters. Test the house, know the number, and don't let anyone - including an inspector - talk you out of a basic and inexpensive test that protects your family.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "Should I choose a mitigator who also does the post-mitigation test, or have someone else do the test?", "answer": "Having the same company do both the mitigation and the post-mitigation test is common and generally fine - they know the system they installed and can do a proper follow-up. However, having an independent certified tester do the post-mitigation test provides a fully unbiased result. In a real estate context where both parties have an interest in the outcome, an independent post-mitigation test carries more weight. Either approach is acceptable; independent is the gold standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "What's a realistic timeline for a radon test, results, mitigation, post-test, and closing?", "answer": "A reasonable tight timeline: Day 1 - device placed. Day 3 - device retrieved and sent to lab. Day 4-5 - lab results received. Day 6 - mitigation installed. Day 8 - post-mitigation device placed. Day 10 - device retrieved. Day 11-12 - post-mitigation results received. Closing on Day 14 or later. This means you need to start the process on Day 1 of your inspection period to comfortably complete everything within a 14-day window. It's doable with good coordination.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-buyer-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-buyer", "category": "workflow-real-estate-buyer", "subtopic": "Questions First-Time Buyers Specifically Ask", "question": "Can I use the radon test result to walk away from the deal and get my earnest money back?", "answer": "Whether you can recover your earnest money depends on your contract's radon contingency language. A properly written contingency that includes a right to terminate if levels exceed a specified threshold and mitigation isn't agreed upon should protect your earnest money if you exercise the contingency properly and within the timeframe. Read your specific language and act within the stated deadlines. If you miss the contingency deadline, recovering earnest money gets much harder.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-buyer.md", "public": true, "tags": [ "workflow-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "The buyer's inspector did a 48-hour radon test and it came back at 4.8. My neighbor tested two years ago and got 1.9. How can mine be so different?", "answer": "Radon varies a lot house to house - even next door. It depends on soil type, foundation construction, how tight the house is, ventilation patterns, and even weather during the test window. Your neighbor's result doesn't tell you anything meaningful about your house. A 4.8 is above the EPA's recommended action level, so it's worth taking seriously regardless of what the house next door showed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "The radon test came back at 7.4 and now the buyers want to walk. Is that level really that alarming?", "answer": "7.4 pCi/L is elevated, but it's also very much in the range that mitigation handles routinely. The good news is that a sub-slab depressurization system - the most common fix - typically reduces levels by 80-90% or more. If the buyers understand the fix is straightforward and proven, a lot of them come back to the table. Sometimes it just takes a calm conversation about what mitigation actually does.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "My house is under contract. The 48-hour test showed 4.3 pCi/L. The buyers didn't ask for mitigation, they just asked for a re-test. Should I agree to that?", "answer": "Re-testing is reasonable. A 4.3 is just above the EPA action level, and a second test can either confirm the reading or show it was influenced by conditions during the first test window - things like a closed house during unusual weather. Agreeing to a re-test shows good faith and costs you very little. If the second test comes back in a similar range, then mitigation is the practical next step.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "Buyer's test came back at 4.1. My agent says just offer a credit instead of fixing it. Is that a good idea?", "answer": "A credit can work, but it puts the buyer in the position of managing the mitigation themselves after closing - including finding a contractor and scheduling it. Some buyers prefer that flexibility; others feel better seeing the system already installed. At 4.1, the fix is very straightforward, so if the deal has good bones, having it done before closing often creates less friction than negotiating a credit amount.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "The radon test came back at 4.9 and the buyers are demanding the system be installed within 5 days. Is that realistic?", "answer": "It's tight but sometimes doable depending on contractor availability. Five business days is a real pressure situation. Communicate clearly with your agent and the mitigation contractor about what's realistic - some contractors can move fast, especially if the house has a standard poured-concrete or block basement. If the timeline can flex to 7-10 days, that's usually more workable without sacrificing the deal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "The buyers are asking for mitigation AND they want to pick the contractor. Is that normal?", "answer": "It's not unheard of. Some buyers, especially cautious ones, want input into who does the work. That's worth a conversation. Typically the seller controls the remediation when they're paying for it, but if it keeps the deal alive and the contractor is legitimate and experienced, there's often no reason to fight it. Just make sure whoever does the work does it right.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "The buyer's test showed 5.0 and they want to bring in their own mitigation company for a second opinion before agreeing to any work. How should I handle that?", "answer": "Let them. A second opinion costs nothing in terms of your time and doesn't commit you to anything. If their contractor confirms the reading and recommends the same fix, you've built trust. If there's a disagreement, you have useful information. Sellers who fight the process usually make deals harder, not easier.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "First test was at 5.8. We had a system installed. Second test shows 3.6. The buyers are still nervous. What do I say?", "answer": "3.6 is a meaningful improvement from 5.8, and it's below the EPA action level. Explain that this is exactly what mitigation is designed to do - not make radon disappear, but reduce it to a level where ongoing exposure risk is substantially lower. The system will continue running after closing. Some buyers just need the explanation framed calmly: the problem was found, the fix was installed, the re-test shows it's working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "The test was at 4.6 and I only have 3 weeks until closing. Is it possible to get mitigation done and re-tested in that window?", "answer": "Yes, in most cases. A standard mitigation installation typically takes a few hours. Most radon professionals can then do a short-term post-mitigation test that runs 48 hours. If you add a few days of scheduling buffer, three weeks is enough time in most markets. Move quickly to get on a contractor's calendar.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "Buyer's test came back at 9.2. They want out. Can the mitigation actually fix something that high?", "answer": "Yes. High pre-mitigation levels are not a ceiling on how much improvement mitigation can deliver - if anything, systems often show dramatic reductions when starting from a high baseline. 9.2 going to under 2.0 post-mitigation is not unusual. The question is whether the buyers can be shown enough documentation to restore confidence. If they see the system installed and a passing post-test, many come back.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "I had mitigation installed last spring before I knew I was going to sell. The buyer's inspector is saying the system might not be working right because the test came back at 4.3. What now?", "answer": "Have the system inspected by a qualified radon professional. Sometimes systems develop issues - a failed fan, a disconnected joint, a pressure imbalance. It's also possible the current test conditions differ from when you first tested. Don't assume the system is broken just from one number, but do have someone look at it. If there's a problem, it may be a quick repair.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "I fixed radon three years ago. Post-mitigation test showed 1.4. Now I'm selling. Do I mention it or just let the buyer's test speak for itself?", "answer": "Mention it. You have documentation showing a problem was found and properly addressed, with a confirmed low post-mitigation reading. That's a selling point, not a liability. Buyers who understand radon will actually feel better knowing the house has been tested and mitigated than they would about a house with no history at all.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "I tested for radon before listing, got a 5.5, had mitigation done, retested at 1.9, and now I'm listing. How do I present all of this to buyers?", "answer": "That's a clean story with good documentation. Share all of it - the original test, the mitigation installation, and the post-mitigation confirmation test. Buyers who see that sequence understand: the seller was proactive, found an issue, fixed it correctly, and verified the fix. That builds confidence, not concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "Is it better to mitigate before listing or wait to see if the buyer requests it?", "answer": "If you have any reason to believe your home has elevated radon - older construction, basement living space, high-risk geology - testing before listing is almost always the smarter move. You control the timing, you pick the contractor, and you can list with clean documentation. Reactive mitigation during a deal puts you under time pressure and can spook buyers even when the fix is simple.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "My house has a mitigation system already. Does that make it more appealing to buyers?", "answer": "For radon-aware buyers, yes. A functioning mitigation system with documentation tells them the issue was identified and handled. In high-radon regions especially, buyers have been coached to look for this. It removes uncertainty, which is valuable in a transaction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "How do I explain the PVC pipe coming out of my basement floor to buyers who ask during showings?", "answer": "Be straightforward. Tell them it's a radon mitigation system - a fan pulls air from under the slab and vents it outside, which keeps radon from accumulating inside the house. If you have documentation, offer to share it. Buyers who understand what they're looking at generally find it reassuring. Buyers who don't know what it is can be anxious if you're vague about it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "I'm about to list my house and my neighbor just told me his radon test came back really high. Should I test before listing?", "answer": "Yes, I'd test. Radon doesn't follow property lines and your neighbor's result doesn't tell you what's happening in your house - but it does tell you it's worth knowing before a buyer's inspector finds out. A pre-listing test gives you information when you can act on it without deal pressure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "Will radon mitigation lower my home's value?", "answer": "No - if anything, having mitigation with documentation typically supports value. What lowers value is a discovered radon problem without a fix. A properly installed system with a confirmed low post-test is something you can put on the listing as a known, resolved item.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "I'm selling a house in a region where radon is really common. Every house here has it. Does that work in my favor?", "answer": "In high-radon regions, buyers are generally more educated about what mitigation means and less likely to panic over an elevated reading. The local real estate market has often normalized the process of testing and mitigating. Even so, \"everyone has it\" is not a reason to skip addressing it - it just means the conversation is usually calmer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "The buyer's agent told their clients the radon system in my basement is a \"red flag.\" Is that accurate?", "answer": "No, a properly installed, functioning mitigation system is not a red flag - it's evidence of responsible ownership. The red flag would be discovering elevated radon with no fix. If the buyer's agent is framing it that way, it may be worth providing documentation of the system and post-mitigation test to reframe the conversation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyer's Test Came Back High - Now What?", "question": "I'm selling and I want to test radon myself before the buyer's inspector does. What kind of test gives me results I can actually use?", "answer": "A short-term test - either a charcoal canister sent to a lab or a certified professional test - will give you a number you can act on. Do it in the lowest livable level of the home with windows closed per standard protocol. If you want a number you can hand to a buyer's agent with confidence, having a professional do it carries more weight than a DIY kit, though both can give you useful early information.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "As-Is Sales and Negotiations", "question": "Can I sell a house as-is with a radon level of 8.0?", "answer": "You can sell a house as-is at any radon level, as long as you're disclosing what you know. Some investors buy properties in this condition. The pool of buyers shrinks at higher radon levels without a fix, and the offers you get will likely reflect the cost of mitigation. It's a legitimate approach if you understand the tradeoffs.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "As-Is Sales and Negotiations", "question": "I fixed radon before listing my house. The buyer's test is still showing 3.8. Is that a problem?", "answer": "3.8 is below the EPA action level of 4.0, and it's a significant drop if your pre-mitigation level was higher. Some buyers see 3.8 and feel completely fine. Others want to see more margin below 4.0. The question is whether the mitigation system is performing as expected - if you had a post-install test before listing that showed a similar number, you have evidence the system is doing its job. That documentation matters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "As-Is Sales and Negotiations", "question": "I mitigated before listing, the post-test showed 1.8, and now three months later the buyer's test shows 3.4. Why did it go up?", "answer": "Short-term tests can be influenced by weather, season, house pressure, and test conditions. A 3.4 is still below the EPA action level, and the variation from 1.8 isn't necessarily a sign the system isn't working - radon fluctuates. What you want to know is whether the system fan is running and the suction is intact. Have someone check the system before making any assumptions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "As-Is Sales and Negotiations", "question": "My post-mitigation test came back at 0.9 pCi/L. I'm listing the house next month. Is that result going to be reassuring to buyers?", "answer": "Yes. 0.9 is about as low as residential radon testing typically reads. Sharing that result with documentation of when it was done and who performed it gives buyers a clear picture. That's a strong data point.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "As-Is Sales and Negotiations", "question": "I had mitigation done and the re-test showed 2.2. The buyers want another test done closer to closing. Is that a normal ask?", "answer": "It's not unreasonable, though it's not always standard. Some buyers want fresh data, especially if the post-mitigation test was done well before the inspection period. If your contractor is confident the system is functioning correctly and you have the original post-test documentation, you're in a solid position - a fresh test should confirm similar results.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "As-Is Sales and Negotiations", "question": "The mitigation contractor said the system is running fine, but the buyer's inspector did a test and got 3.9. They want a second mitigation fan installed. Is that necessary?", "answer": "3.9 is just under the EPA action level, and whether an additional fan would meaningfully change that number is worth exploring. Have a qualified radon professional evaluate the current system's performance - suction levels, pipe configuration, whether the result is within normal seasonal variation. Don't add equipment just to satisfy anxiety if the system is actually doing its job.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "As-Is Sales and Negotiations", "question": "The buyer wants mitigation AND a post-mitigation test before closing. Is that a reasonable timeline?", "answer": "It's tight but doable in most cases. Installation typically takes a few hours, and a 48-hour post-mitigation test can run immediately after. If you allow a few days for contractor scheduling, you can usually get both done within 5-7 business days. Make sure all parties have realistic expectations about the timeline going in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "As-Is Sales and Negotiations", "question": "I had a system installed two years ago. It's been running since then. The buyer's agent is asking for proof the system still works. What counts as proof?", "answer": "A current short-term radon test is the most useful documentation. The visual indicators on the system (a u-tube manometer or similar gauge) show whether suction is present, but a test result showing current levels is what buyers and their agents really want to see. If you haven't tested recently, doing a test now before the buyer's inspector does one gives you data to present proactively.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "As-Is Sales and Negotiations", "question": "I'm selling a house I owned for 10 years. I had mitigation done in year two. I have all the paperwork. Does that old post-test still count?", "answer": "It shows the system was installed and working at that time. Buyers and their agents will likely want a more recent test - 8-year-old data is better than nothing but doesn't tell them what's happening today. A current test alongside the original documentation is the strongest package you can offer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "I'm a landlord. Do I have to test my rental property for radon?", "answer": "It depends on your state and sometimes your municipality - some have specific requirements for rentals, others don't. But setting legal requirements aside for a second: if you have a basement unit or a first-floor unit on a slab, and your tenants are spending significant time there, testing is the responsible thing to do. Radon is a long-term lung-cancer risk from cumulative exposure - the people living in your property are the ones accumulating it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "I own a rental property and I've never tested it for radon. My tenant has been there for four years. Should I test now?", "answer": "Yes. Testing is inexpensive and gives you real information about what the occupants have been living with. If the levels come back elevated, you can take action. If they come back low, you have documented evidence the property is fine. Either way you're better off knowing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "I rent out my basement apartment. The tenant is asking about radon. What are my obligations?", "answer": "At a minimum, you should take the question seriously and test. Basement apartments are higher risk because radon enters through floors and walls, and basement-level spaces accumulate more of it. Whether you have a legal obligation depends on your state, but from a practical landlord standpoint, ignoring a tenant's concern about a known health risk is not a good position to be in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "My tenant said they bought an Airthings and the basement shows 5.0 pCi/L. Am I responsible?", "answer": "Consumer monitors can provide useful trend information, but they're not the same as a professionally conducted test. The reasonable first step is to confirm the reading with a proper test - a charcoal canister or professional short-term test in the space. If that confirms elevated levels at or above 4.0, then yes, you should address it. Dismissing the tenant's concern without investigating is not a good look for any landlord.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "My tenant's Airthings says 5.0. I had a professional test done and it came back at 3.8. The tenant doesn't believe my test. What now?", "answer": "Consumer monitors and professional tests can vary, and both have their limitations. A 3.8 on a proper short-term test is below the EPA action level. You can explain to the tenant how the testing methods differ and share the certified results. If tension persists, another professional test is an option - sometimes a second result from an independent party settles the question.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "I have a 12-unit rental building. Do I need to test each unit?", "answer": "Testing every ground-floor and basement unit is the thorough approach, since radon concentration varies within a building. Upper floors are generally at much lower risk. In a 12-unit building, that might mean testing 4-6 units depending on your floor configuration. There's no universal federal requirement for multi-unit buildings, but some states and cities have specific rules, so check your local requirements.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "I own a duplex. The lower unit radon test came back at 6.0. What does that mean for the upper unit?", "answer": "Upper-floor units generally see significantly lower radon levels because radon dilutes as it moves up through the building. A 6.0 on the ground floor doesn't mean 6.0 on the second floor - in most cases upper floors see much lower readings. But testing the upper unit too is the only way to know for sure. It's worth doing, and it gives you data for both sets of tenants.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "I own a duplex. Lower unit radon is 6.0. Does that affect my upper unit tenants' lease or my obligations to them?", "answer": "From a practical standpoint, notify them that you're investigating a radon issue in the lower unit and test the upper unit as well. If the upper unit tests low, you have documentation. If it also tests elevated, you address both. Keeping tenants informed and taking action is the responsible path.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "My tenant has been complaining about radon for two months. I keep putting it off. What's the risk?", "answer": "The longer this goes unaddressed, the more exposure the tenant is accumulating - and the harder it becomes to explain why you waited. Radon is a long-term lung-cancer risk from cumulative exposure. Two months of documented complaints with no action is a liability posture most landlords don't want. Test, and if it's elevated, mitigate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "A new tenant just moved into my basement unit. Should I test before they settle in or does it matter?", "answer": "Testing before they move in is ideal - or very soon after. It's much easier to install mitigation in an unoccupied unit than to work around a tenant's schedule and belongings. If you didn't test before they moved in, do it now. Early in a tenancy is better than years later.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "I have three rental houses. Should I test all of them?", "answer": "Yes. Radon doesn't behave consistently from house to house, even if they're in the same neighborhood. Testing each property is the only way to know what's actually happening. It's a modest cost compared to what you're managing on behalf of tenants.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "One of my rental properties tested at 8.3. I haven't told my tenant yet. How do I approach this?", "answer": "Tell them promptly and tell them plainly: the test came back elevated, you're taking it seriously, and you're arranging for a mitigation system. Don't soften it to the point of being misleading, but don't alarm them either - radon at 8.3 is elevated, but it's also a fixable problem. What tenants usually want to hear is that you're acting on it, not that you're explaining why it might not be a big deal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "My tenant is pregnant and just found out our rental has elevated radon. She's panicking. What do I say?", "answer": "Acknowledge her concern, don't dismiss it, and move quickly. Radon is a long-term lung-cancer risk from cumulative radiation - it doesn't cause acute harm from short-term exposure, and a few weeks of slightly elevated exposure is not the same as years of it. Even so, her concern is legitimate and the right response is to move toward mitigation without delay. Showing urgency and competence in your response matters here.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Testing Obligations", "question": "My tenant is threatening to withhold rent unless I mitigate radon. What should I do?", "answer": "Move faster than they expect. Confirm the radon levels with a proper test if you haven't already, and if they're elevated, get a contractor scheduled. Tenant concerns about a documented health risk at elevated levels are legitimate. The fastest way through this is to fix the problem, not to argue about whether it's required.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Tenant Complaints and Requests", "question": "My tenant wants me to mitigate radon but I'm not sure the reading is accurate. What should I do?", "answer": "Confirm the reading. Hire a certified radon professional to do a proper test under standard conditions. If that test confirms elevated levels - at or above 4.0 pCi/L - you have your answer and you move toward mitigation. If it comes back lower, you have documentation to share with the tenant. Either way, refusing to investigate is the wrong move.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Tenant Complaints and Requests", "question": "My tenant sent me a text saying the air quality monitor they bought says radon is at 6.0. Do I have to act on a consumer device reading?", "answer": "Consumer devices vary in accuracy and aren't the same as a certified lab test. You don't have to take the consumer device as the final word - but you should verify. Schedule a professional test. If the professional test confirms elevated levels, act on it. Using the consumer device's limitations as a reason to do nothing is a different thing than genuinely investigating.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Tenant Complaints and Requests", "question": "My new tenant found a mitigation system in the basement. They want documentation. What do I give them?", "answer": "Ideally: the original installation invoice, the post-mitigation test results, and any service records you have. If you don't have those because you bought the property without them, be honest about that and offer to do a current test to establish a baseline. A tenant asking for documentation is doing the right thing - help them get it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Tenant Complaints and Requests", "question": "My tenant is asking about radon and I genuinely have no idea what the levels are in my property. I've never tested. What do I do?", "answer": "Test. It's the only honest and practical answer. A professional short-term test will give you real data within 48-96 hours. You can't have an informed conversation with your tenant, manage the property responsibly, or protect yourself from future liability without knowing what you're dealing with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Tenant Complaints and Requests", "question": "I'm a property manager and a tenant just complained about radon. What's my next step?", "answer": "Get a professional radon test scheduled in the affected unit as soon as possible. Communicate to the tenant that you've taken their concern seriously and are investigating. Document everything - the complaint date, your response, and the test results. If the result is elevated, escalate to the property owner immediately with a recommendation to mitigate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Tenant Complaints and Requests", "question": "A tenant is complaining about headaches and says it's from radon. Could it be?", "answer": "Radon does not cause acute symptoms like headaches, sore throat, or fatigue. It is a long-term lung-cancer risk from years of cumulative radiation exposure - not something that produces day-to-day symptoms. You should still test for radon because it's the responsible thing to do, but the headaches have another explanation. If the tenant has health concerns, direct them to a doctor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Tenant Complaints and Requests", "question": "My tenant says their Airthings has been showing 7.0 for three weeks and they're scared. How do I respond?", "answer": "Take it seriously and move quickly. Have a professional test done to confirm - 7.0 on a consumer device could be accurate or it could be off, but the right response to that reading is verification, not skepticism. Tell the tenant you're scheduling a professional test immediately and that if the results confirm an issue, you'll arrange mitigation. Keep them informed throughout.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Tenant Complaints and Requests", "question": "My tenant is asking what radon actually does to people. How do I explain it without alarming them?", "answer": "Radon is a naturally occurring radioactive gas that, at elevated levels over many years, increases the risk of lung cancer. It doesn't cause immediate symptoms or short-term effects. The risk comes from long-term cumulative exposure, which is why testing and, if needed, mitigation matter. The good news is that if levels are elevated, a mitigation system can reduce them substantially.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Tenant Complaints and Requests", "question": "My tenant asked me to test and I did. The result is 3.5. Should I mitigate?", "answer": "3.5 is below the EPA action level of 4.0, but the EPA acknowledges that levels between 2.0 and 4.0 carry real, if lower, risk. Whether to mitigate at 3.5 is a judgment call. Some landlords do it to eliminate the conversation entirely; others don't. If the tenant is particularly concerned and the relationship matters to you, mitigation at that level is not unreasonable, and the cost is manageable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Tenant Complaints and Requests", "question": "My tenant keeps texting me about radon and it's getting to be a lot. How do I put this to rest?", "answer": "The cleanest way is to test, share the results, and if needed, mitigate. Once you've tested and can show documented results - and either the levels are low or you've installed a system and re-tested - the conversation has a factual foundation. Most tenants stop pushing when they see real data and real action.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Multi-Unit and Commercial Properties", "question": "I own a four-unit building, all ground floor. I tested one unit and it came back at 4.9. Do I assume all four are the same?", "answer": "Not necessarily. Radon can vary within the same foundation depending on where entry points are concentrated. A 4.9 in one unit is enough to take action, and testing all four gives you a complete picture. It's possible other units are lower, or one is significantly higher. You want to know before you mitigate so the solution is designed for the actual problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Multi-Unit and Commercial Properties", "question": "I own a commercial building with a basement office. An employee asked about radon. Do I need to test?", "answer": "Testing a basement office space is reasonable and responsible. EPA guidance is primarily residential, but the physics of radon don't change because it's an office. If people are spending 8 hours a day in a basement environment, long-term cumulative exposure is a real consideration. Testing is a low-cost step that gives you real information.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Multi-Unit and Commercial Properties", "question": "I have a small apartment complex. The lower-level units share a common foundation. If I mitigate one, does it help the others?", "answer": "A mitigation system is designed to depressurize the soil beneath a foundation, and in some cases one well-designed system can address multiple connected areas. But it depends on how the foundation is configured and whether the suction field extends across the whole footprint. A qualified radon contractor can assess the building and tell you whether one system handles it or whether you need multiple points of suction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Multi-Unit and Commercial Properties", "question": "I own a triplex. The lowest unit radon is 5.0. I'm thinking of moving into that unit myself. Should that change my timeline for mitigation?", "answer": "It should accelerate it. A 5.0 is above the EPA action level, and whether it's your tenant or you living there, the exposure is the same. If anything, knowing you'll be the one in the space should make the decision easier, not harder.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Property Managers", "question": "As a property manager, can I authorize a radon test without the owner's approval?", "answer": "Most property management agreements define what you can authorize independently. A radon test is typically a low-cost action, and most owners would approve it immediately if asked. If your agreement allows routine inspection and maintenance decisions up to a certain dollar threshold, a test likely falls within it. When in doubt, a quick call to the owner takes a few minutes and protects everyone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Property Managers", "question": "The owner of a property I manage says they don't want to spend money on radon mitigation. How do I handle that?", "answer": "Document their decision in writing and make sure they understand what the tenant has reported and what the professional test showed. You've done your job by presenting the information and recommending action. If the owner refuses to act on a confirmed elevated reading, that's their call - but you want a paper trail showing you communicated the issue clearly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Property Managers", "question": "I manage 30 properties. I don't have time to test all of them. Where should I start?", "answer": "Start with any basement units or ground-floor units where tenants spend significant daily time. Properties with older construction - pre-1980, with block or stone foundations - are generally higher risk. Any property where a tenant has raised a concern should go to the top of the list. A phased testing plan over 60-90 days is practical and manageable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Property Managers", "question": "A tenant just moved out and complained about high radon on their way out. Now I'm turning over the unit. What do I do?", "answer": "Test the unit during the turnover, before the next tenant moves in. Turnover is actually the ideal time to test and, if needed, mitigate - the space is empty, access is easy, and you can bring the next tenant in with documentation showing the unit was tested and addressed. Don't let the complaint from the departing tenant sit in a file without investigating it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Property Managers", "question": "One of my managed properties just sold. The new owner is asking if I have radon test records. Do I have to provide them?", "answer": "If you have records, sharing them is the right thing to do. They belong to the property history, not to you personally. If you don't have any because radon was never tested under your management, say so clearly. The new owner is going to want to establish their own baseline anyway.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Documentation and System Records", "question": "I bought a house with a radon system already installed. I have no records. What should I do if I'm now selling?", "answer": "Start by getting a current test done. That gives you real, timely data. Then have a radon professional inspect the existing system to confirm it's functional and well-installed. Between a current test result and a professional inspection, you can offer buyers meaningful information even without the original installation records.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Documentation and System Records", "question": "My tenant wants documentation of the mitigation system. I have the invoice but not the post-mitigation test. Can I provide the invoice only?", "answer": "Provide what you have and be honest about what's missing. An invoice shows a system was installed, but without the post-test, you don't have evidence of what levels looked like after installation. The right move is to do a current test and share those results - that tells the tenant what's happening in their space today, which is what actually matters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Documentation and System Records", "question": "What paperwork should I have on hand when I sell a house that has a mitigation system?", "answer": "Ideally: the original installation invoice, the post-mitigation test result, any subsequent test results, and the contractor's warranty or service documentation. If the system has been serviced or the fan replaced, include that too. The more complete the paper trail, the more confidence buyers and their agents will have.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Documentation and System Records", "question": "The radon mitigation company I used went out of business. I can't get records from them. What now?", "answer": "Do a current professional test to establish where levels stand today. If possible, have another qualified radon professional inspect the existing system and document its configuration. You may not be able to reconstruct the original installation records, but you can create a current baseline that buyers or tenants can rely on.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Documentation and System Records", "question": "My realtor wants me to attach the radon test results to the listing. Is that a good idea?", "answer": "Generally yes, especially if the results are low or show successful mitigation. It gets the information in front of buyers early and signals transparency. Buyers who see the documentation upfront are less likely to treat radon as an unknown during inspection.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Documentation and System Records", "question": "The contractor who installed my system gave me a warranty. Does that transfer to the new buyer?", "answer": "Many radon mitigation warranties are tied to the installation address, not the owner, so they may transfer with the property. Some are contractor-specific and may require the new owner to register. Pass the warranty documentation to the buyer and let them confirm with the contractor. Don't promise transferability you haven't confirmed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Documentation and System Records", "question": "A buyer's agent is asking for the brand and model of the radon fan installed in my basement. I have no idea. How do I find out?", "answer": "Look at the fan housing itself - the brand and model are usually printed on the motor or on a label on the housing. Common brands include Fantech, RadonAway, and Festa. If you can't find it, a radon professional can identify it during a system inspection.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Timing and Closing Pressure", "question": "We close in 10 days. The radon test just came back at 5.8. Is it too late to fix this?", "answer": "It's tight, but not necessarily too late. Some mitigation contractors can do installations within a day or two if they have availability, and a 48-hour post-test can follow immediately after. Whether 10 days is enough depends on contractor availability in your area. Get on the phone with a contractor today - don't wait.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Timing and Closing Pressure", "question": "I'm under contract. The radon test took longer than expected to come back from the lab and now I only have 6 days left in the inspection period. What should I do?", "answer": "Talk to your real estate agent immediately. Most buyers and sellers can agree to extend the inspection period by a few days when there's a legitimate delay like lab timing. It's almost always better to request a short extension than to make decisions without complete information.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Timing and Closing Pressure", "question": "The buyers want to re-test after mitigation, but we only have one week until closing. The mitigation was just installed. Can we extend the closing date?", "answer": "A short extension is often the cleanest solution and protects both parties. Most buyers and sellers can agree to push closing 3-5 days to allow a proper post-mitigation test. The alternative - closing without confirmation the system is working - creates uncertainty for the buyer that tends to generate more conflict than just waiting for the result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Timing and Closing Pressure", "question": "My buyer is in a hurry to close and says they'll accept a credit instead of a re-test. Should I push back?", "answer": "If you've installed a system and have reason to believe it's working, a credit in lieu of a post-test is a legitimate deal structure. Just make sure the credit amount is fair given what the buyer is taking on. Some buyers genuinely prefer that flexibility; others regret it later. If the buyer is making an informed choice and both parties agree, it can work.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Timing and Closing Pressure", "question": "The radon test came back elevated on the last day of the inspection period. The buyers submitted an addendum. Do I have to respond?", "answer": "You don't have to accept their terms, but you do need to respond - ignoring an addendum doesn't make it go away; it may put the deal in default depending on your contract. Review the request with your agent and decide whether to accept, counter, or decline. Not responding is rarely the right move.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Basement Apartments and Rentals", "question": "I have a finished basement I rent out as a short-term rental on Airbnb. Do I need to worry about radon?", "answer": "For short-term guests staying a few nights, cumulative long-term exposure isn't the concern it is for full-time occupants. Even so, knowing the radon level in your space is basic due diligence. If levels are elevated, you should address it - both for the wellbeing of anyone spending time there and because it's the right thing to do as a host.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Basement Apartments and Rentals", "question": "My basement apartment rents for a good rate. I don't want to deal with a radon issue scaring off my tenant. What should I do?", "answer": "Test. If levels are low, you have documentation that removes the concern. If they're elevated, you can install mitigation and re-test before disclosing anything to a prospective tenant. Trying to avoid the conversation by not knowing is worse than knowing and acting.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Basement Apartments and Rentals", "question": "I rented my basement out for years before I found out radon was a concern. The old tenant just asked me if I ever tested. What do I say?", "answer": "Be honest: you didn't test during their tenancy. You can acknowledge that you've since learned more about radon and that you're taking steps now. Don't minimize the question, but also don't catastrophize - you don't know what the levels were during their time in the space, and that information isn't available. If they have health concerns, they should talk to a doctor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Basement Apartments and Rentals", "question": "I'm about to rent out my walkout basement. Is that lower risk than a below-grade basement?", "answer": "A walkout basement generally has better natural ventilation than a fully below-grade space, which can affect radon levels. But it's not a reliable predictor - radon is still entering through the floor and walls, and a walkout can still have elevated levels. Test it; don't assume the walkout design makes it low risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Basement Apartments and Rentals", "question": "My basement apartment is below grade on three sides. Should I be extra concerned about radon?", "answer": "A basement that's mostly below grade and surrounded by soil is a higher-risk configuration - more contact with soil means more entry points for radon. Testing is especially worthwhile in this case. If levels come back elevated, a sub-slab depressurization system is typically effective in this type of foundation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Basement Apartments and Rentals", "question": "I'm converting my basement into a rental unit. Should I test for radon before finishing it?", "answer": "Absolutely - test before you invest in the finish work. If levels are elevated, installing mitigation before drywalling is far easier and less expensive than retrofitting it later. Rough-in the mitigation pipe during construction if you're in a radon-prone area, even if levels come back low right now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Basement Apartments and Rentals", "question": "My basement apartment tenant just signed a one-year lease. I tested and the result is 6.2. Now what?", "answer": "Notify your tenant of the result, communicate what you're doing to address it, and move quickly toward mitigation. A 6.2 is above the action level and should be addressed promptly. Don't wait for a lease renewal cycle - your tenant is in there now, accumulating exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Inherited Properties and Flips", "question": "I inherited a house and I'm selling it. There's a radon system in the basement. I have no idea what the history is. What do I do?", "answer": "Get a current professional test done and have the system inspected by a qualified radon professional. That gives you two things: current data on what levels actually are today, and information on whether the system is functioning correctly. Share both with potential buyers. You can't reconstruct history you don't have, but you can give buyers a clear picture of current conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Inherited Properties and Flips", "question": "I'm flipping a house and I found an old mitigation system in the basement. There's no documentation anywhere. Should I replace it or just test and see?", "answer": "Test first. If levels come back low and the system appears to be running, you have a working system regardless of age. If levels come back elevated or the system shows signs of failure - worn fan, disconnected piping - then replacement or repair is warranted. Don't replace something that's working just because you don't have paperwork.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Inherited Properties and Flips", "question": "My pre-listing radon test was done in summer. The buyer's test was done in winter and came back higher. Is that because of the season?", "answer": "Possibly. Radon levels typically fluctuate seasonally, and winter testing often produces higher readings due to closed houses, less ventilation, and frozen ground that limits gas movement through soil. A winter reading that's somewhat higher than a summer reading isn't automatically a sign something changed - it can be a normal seasonal variation. Context matters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Inherited Properties and Flips", "question": "The buyer is saying my house \"failed\" the radon test. Is that the right way to say it?", "answer": "Not really, no. Radon testing doesn't work like a pass/fail inspection item in the way people sometimes describe it. A test result is a measurement. The EPA recommends action at 4.0 pCi/L or higher. A result above that threshold indicates mitigation is worth doing - it doesn't mean the house is condemned or permanently flawed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Inherited Properties and Flips", "question": "I retested my basement in January and got a 5.2. In July I got a 3.0. Which one do I believe?", "answer": "Both results are real snapshots of different conditions. Short-term tests capture what's happening during the test window, which is affected by season, weather, ventilation, and occupant habits. The EPA recommends longer-term testing (90 days or more) for the most accurate picture of average annual exposure. If you want a definitive answer, a long-term test is more reliable than comparing two short-term tests taken months apart.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Inherited Properties and Flips", "question": "My house is on the market and the radon test was done with the windows open. Is that valid?", "answer": "Standard radon testing protocol requires closed-house conditions for at least 12 hours before and during the test. Testing with open windows will produce artificially low readings. If the buyer's test was conducted under non-standard conditions, the result isn't reliable. This is something to raise with the inspector and potentially re-test under proper conditions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Inherited Properties and Flips", "question": "I'm selling in the spring. The buyer wants to test during a stretch of heavy rain. Does that matter?", "answer": "Weather can influence short-term radon results - changes in barometric pressure, soil saturation, and ventilation patterns during storms can affect readings in either direction. Some testing protocols are more sensitive to weather than others. It's not usually a reason to refuse a test, but it's worth noting as context if the result seems unusual.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyers Requesting Additional Tests", "question": "The buyer wants to run their own radon test after I've already had a professional test done. Is that normal?", "answer": "It's not unusual, especially with cautious buyers or buyer's agents who want independent verification. Let them test. If your professional test showed low levels, a second test should confirm it. Fighting additional testing almost always raises more suspicion than the test itself would.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyers Requesting Additional Tests", "question": "The buyer wants me to use a specific radon testing company they chose. Do I have to use their company?", "answer": "If you're ordering the test as part of your seller obligations or negotiations, you generally have a say in who conducts it. If they're ordering the test themselves during the inspection period, they can use whoever they want. Most real estate contracts don't specify which company conducts radon testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyers Requesting Additional Tests", "question": "The buyer's inspector did a 48-hour radon test and the result was 3.9. The buyer is asking for a re-test to see if it goes over 4.0. Is that a reasonable ask?", "answer": "It's a bit unusual - 3.9 is below the action level, and re-testing to see if a number tips over the threshold isn't standard practice. Even so, acknowledging their concern and doing a second test isn't harmful if it keeps the deal together. A second test that confirms 3.9 or comes back lower ends the conversation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyers Requesting Additional Tests", "question": "The buyer is asking me to pay for a professional long-term test AND a separate short-term test. Is that a normal part of a sale?", "answer": "No - that's beyond what's typically required or requested in a real estate transaction. A single properly conducted short-term test under closed-house conditions is the norm. You can agree to it if you want to keep the deal moving, but it's not a standard obligation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Buyers Requesting Additional Tests", "question": "After my mitigation system was installed, I got a 1.2 on the post-test. The buyer's inspector got 2.8. That seems like a big gap. What's going on?", "answer": "1.2 to 2.8 is a meaningful difference, but both are well below the EPA action level. Short-term tests can vary based on when they're run, conditions during the test window, and where exactly in the space the test is placed. The system appears to be working - both results are low. Some variation between tests is normal and doesn't indicate a problem with the mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "First-Time Sellers Navigating Radon", "question": "I've never dealt with radon before. My house is 40 years old and I'm selling it. Where do I start?", "answer": "Start by testing. If you don't have any radon history on the house, get a professional test done in the lowest livable level - typically the basement or first floor if it's on a slab. That gives you the information you need to make decisions and to answer buyers' questions confidently.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "First-Time Sellers Navigating Radon", "question": "I didn't even know what a radon test was until the buyer asked for one. What does the test actually involve?", "answer": "A standard real estate radon test is a 48-hour closed-house test. A small device - either a charcoal canister or an electronic continuous monitor - is placed in the lowest livable level of the home. The house stays closed (no open windows) during the test. The canister is sent to a lab, or the monitor records readings continuously. The result is an average concentration level in pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "First-Time Sellers Navigating Radon", "question": "The buyers want a radon inspection and a radon test. Are those two different things?", "answer": "Sometimes people use those terms interchangeably, but technically they're different. A radon test measures the concentration of radon in the air of the home. A radon inspection might refer to a visual assessment of an existing mitigation system's installation and condition. If the home has a mitigation system, the buyers may want both - a test to see what the current levels are, and a look at the system to confirm it's properly installed and functioning.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "First-Time Sellers Navigating Radon", "question": "My neighbor says radon is only a problem in older homes. Is that true?", "answer": "No. While older homes with certain foundation types can be more susceptible, radon can affect homes of any age. It's about the soil under the home and how the structure allows gas to accumulate, not primarily about the age of the construction. New construction with tight foundations can actually trap radon more effectively than drafty older homes. Test the house; don't assume based on age.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "First-Time Sellers Navigating Radon", "question": "My buyer said the radon level is dangerous. I don't want to alarm my family who still lives there while we're selling. What do I tell them?", "answer": "Be honest and calm. If levels are above 4.0 pCi/L, the EPA recommends fixing it. You're in the process of doing that. Radon at elevated levels is a long-term risk - it's not a situation that requires immediate evacuation or emergency measures, but it is something worth addressing promptly. Your family can continue living there while you arrange mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "First-Time Sellers Navigating Radon", "question": "Is it possible that my house has been fine for 30 years with elevated radon and nobody knew?", "answer": "Yes, it's entirely possible. Radon doesn't cause acute symptoms, so people living in elevated-radon environments often have no idea. This is why testing matters - elevated radon exposure over many years is a real lung-cancer risk, but it's invisible and odorless. Finding it now and fixing it is the right move regardless of how long the levels may have been elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "First-Time Sellers Navigating Radon", "question": "How do I know if I live in a high-radon area?", "answer": "The EPA has published county-level radon zone maps, and your state radon office typically has more detailed information for your area. But radon zones are broad guidance - they don't tell you what's in your specific house. Homes in \"low radon\" zones can have elevated levels, and homes in \"high radon\" zones can test perfectly fine. The only way to know is to test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "First-Time Sellers Navigating Radon", "question": "My buyer's inspector is coming Friday and the radon test will run over the weekend. What do I need to do to prepare?", "answer": "Keep the house in closed-house conditions - windows and exterior doors closed - starting 12 hours before the test begins and throughout the test period. Normal HVAC use is fine. Don't run ventilation fans that bring in outdoor air. And don't move the test device or interfere with it once it's placed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "First-Time Sellers Navigating Radon", "question": "Can I make food, run the dishwasher, and live normally while the radon test is running in my basement?", "answer": "Yes. Normal daily living activities are expected during the test. The closed-house conditions that matter are about windows, doors, and ventilation fans - not daily routines inside the house. Cook, shower, run appliances normally.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "First-Time Sellers Navigating Radon", "question": "I want to be honest with my buyers but I'm scared the radon issue will kill the deal. What's the realistic outcome?", "answer": "Most deals with radon findings don't fall apart - they get modified. Buyers who find elevated radon during inspection usually want it fixed, not a reason to walk. The sellers who struggle are the ones who try to fight the issue rather than address it. Sellers who fix it promptly and provide documentation almost always get to closing. Call or text Bill and we can talk through what the numbers mean for your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Mitigation System Questions for Sellers", "question": "What actually is a radon mitigation system? I have one in my basement but I don't know how to explain it to buyers.", "answer": "It's a system that draws air from underneath the foundation - usually through a pipe drilled through the slab - and vents it to the outside using a continuously running fan. By creating negative pressure under the slab, it prevents radon from being pulled up into the living space. The pipe and fan are usually visible in the basement or utility area, and the pipe exits through the wall or roof. It runs continuously and uses about as much electricity as a light bulb.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Mitigation System Questions for Sellers", "question": "The radon fan on my mitigation system is loud. Does that affect its performance?", "answer": "A noisier fan can indicate age or wear, but it doesn't necessarily mean it's not functioning. The key indicator of function is suction - most systems have a visual indicator (a u-tube manometer) that shows whether negative pressure is present. Have a radon professional check the system; a worn fan may be worth replacing before the sale to present the system in good shape.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Mitigation System Questions for Sellers", "question": "My mitigation system fan stopped working three months ago and I just noticed. I'm selling the house and the buyer's test is next week. What do I do?", "answer": "Replace the fan before the test if at all possible. A non-functioning system means radon has been accumulating without mitigation, and the test is going to reflect that. Get a contractor in to replace the fan immediately and, if there's any time, run a quick test before the buyer's inspector arrives. If you can't get it done in time, be transparent about what happened and get it repaired promptly during the inspection period.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Mitigation System Questions for Sellers", "question": "There's a pipe sticking up through my driveway on the side of the house. My realtor thinks it's the radon vent. Can a mitigation pipe exit that way?", "answer": "Yes, exterior sidewall and even exterior surface exits are possible depending on how the system was designed and where the contractor ran the pipe. As long as the vent termination is properly located away from windows and air intakes, an exterior exit is an acceptable installation. A qualified radon professional can confirm it was done correctly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Mitigation System Questions for Sellers", "question": "I'm selling a house with a crawl space. How does radon mitigation work differently there?", "answer": "Crawl spaces typically use a different approach - most commonly a sealed vapor barrier over the soil combined with either sub-membrane depressurization (similar to sub-slab, but under the barrier) or forced ventilation. The goal is the same: prevent radon from entering the living space. A crawl space system is slightly different in appearance and mechanics than a slab system, but the principle is the same.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Mitigation System Questions for Sellers", "question": "A buyer's agent said the mitigation pipe in my basement isn't code-compliant. How do I respond?", "answer": "Have a qualified radon professional evaluate the installation. If there's a legitimate issue with the installation - improper pipe routing, a vent that terminates too close to a window, incorrect fan placement - it's worth correcting. If the buyer's agent is flagging something that isn't actually a problem, you need documentation showing that the system is correctly installed. Don't agree to changes based on an agent's opinion; get a professional assessment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Mitigation System Questions for Sellers", "question": "The buyer is asking if the mitigation system has a warranty. What do I tell them if I don't have the paperwork?", "answer": "Tell them you don't have the original warranty documentation, and offer to contact the contractor who installed the system to see if records can be retrieved. Many contractors keep installation records. If that's not possible, you can note what you do know about the system and what a qualified contractor found when they inspected it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "I'm in the middle of a relocation and don't have time to deal with a radon issue. What's the fastest resolution?", "answer": "Getting a contractor scheduled immediately is the fastest path. Installation is typically a few hours. A post-test runs 48 hours. If you can authorize a contractor to work while you're not present, the logistics don't require you to be there. Your real estate agent can coordinate access in most cases.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "My house is sold and I'm two weeks from closing. The buyer's radon test just came back at 4.8. I'm already in my new home. Do I have to come back?", "answer": "You don't have to be physically present for mitigation to happen - a contractor can access the home with coordination through your agent. What you do need to do is respond to the buyer's addendum and authorize the work. Remote management of this is very common when sellers have already relocated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "I'm a first-time home seller. Do I need to have radon knowledge to handle this?", "answer": "You need basic awareness: what radon is, what the EPA recommends, and how to respond if a test comes back elevated. Beyond that, you don't need to be an expert - that's what a qualified radon professional is for. If a buyer's test comes back above 4.0, get someone who knows what they're doing to evaluate and fix it. Call or text Bill and we can talk through what the numbers mean for your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "The buyer's radon test came back borderline - 3.9 - and I'm trying to decide whether to offer mitigation voluntarily. What's the thinking?", "answer": "Voluntary mitigation at 3.9 is a gesture of good faith that some buyers genuinely appreciate and that removes any future uncertainty. It costs you the price of installation but likely prevents ongoing back-and-forth about a number that's right on the line. Whether it's worth it depends on how important the deal is to you and how the buyer is reading the situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "My real estate agent says radon is \"not a big deal\" in our market. Should I trust that?", "answer": "Your agent knows the local market, and it's true that radon awareness and buyer expectations vary by region. Even so, radon being \"not a big deal\" locally doesn't change what the numbers mean or what the EPA recommends. If a test comes back elevated, address it. Don't take \"not a big deal\" as a reason to skip testing or ignore a finding.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "I've owned this house for 25 years. I did a radon test in year two, it came back fine, and I've never retested. Should I test before selling?", "answer": "Yes. A 23-year-old test result isn't very useful for a modern buyer - conditions in and around the house have changed, and radon behavior can shift over time as soil and foundation conditions evolve. A current test is what buyers and their agents are going to want, and it's worth knowing the current picture before going to market.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "The buyer backed out after the radon test. Can I now test and fix it and re-list?", "answer": "Yes. That's actually a reasonable path. Fix the problem, confirm it with a post-mitigation test, document everything, and re-list with that documentation. The next buyer will have a cleaner picture and the radon issue won't blow up during inspection.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "I had two potential buyers walk away after elevated radon test results. Am I going to keep losing deals over this?", "answer": "If radon is consistently causing deals to fall apart, mitigate the problem before the next listing. You know you have elevated radon - every future buyer's inspector is going to find the same thing. Get ahead of it, fix it, and re-list with documentation. The repeated deal loss is more expensive than mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "The buyer's agent emailed me saying the radon \"makes the house unlive-in-able.\" That feels like an exaggeration. What do I say?", "answer": "It is an exaggeration in most typical residential cases, but arguing the semantics probably isn't productive. The radon is elevated, the fix is straightforward, and the fastest path to closing is mitigation with a confirmed post-test. Respond to the substance - you're addressing the elevated radon - rather than the inflammatory phrasing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "The buyer wants to terminate because of radon. The level was 4.3. Is that a legitimate reason?", "answer": "If they have an inspection contingency, they may have the contractual right to terminate for any issue found, depending on how the contract is written. 4.3 is above the EPA action level, so the finding is real even if the level is not extreme. The practical question is whether the deal can be saved by offering to mitigate. Some buyers want reassurance more than they want out.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "I've done everything right - tested, mitigated, re-tested, provided documentation. The buyer is still asking for more. Where does this end?", "answer": "You've done what responsible sellers do. At some point, the process needs to move forward based on documented results. If your post-mitigation test shows levels well below the action level and the system is confirmed functional, you've provided a reasonable level of assurance. If the buyer continues to ask for more after complete documentation, that's a conversation for your agent about what's reasonable to agree to and what isn't.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "My house tested at 2.8. The buyer is fine with it, but their agent is pushing for mitigation. Can the agent override the buyer on this?", "answer": "The buyer is the principal - their agent advises them but can't override their decision. If your buyer is satisfied with a 2.8 result and doesn't want mitigation, their agent's personal preference doesn't determine the outcome. Even so, 2.8 is in the range the EPA says is worth considering, so the agent's concern isn't baseless - but the call belongs to the buyer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "Should I hire the same contractor who did the initial test to do the mitigation?", "answer": "In many states, radon testing and radon mitigation are supposed to be done by separate parties to avoid a conflict of interest. Some states explicitly prohibit the same individual from doing both. Even where it's not prohibited, using a different contractor for mitigation than for the diagnostic test is generally considered better practice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "My listing says \"radon mitigated\" in the listing notes. The buyer's agent says the house still needs to be tested. Can't they just trust the listing?", "answer": "No, and that's appropriate. A buyer's inspector verifying the claim is how the system is supposed to work. \"Radon mitigated\" in a listing is a starting point, not a final answer. The test during inspection is the independent verification. If your system is working, the test will confirm it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "I'm done selling. The deal is closed. The new owners are asking me questions about the radon system. Do I have to answer?", "answer": "You're not obligated to provide ongoing support after closing, but sharing what you know about the system is a straightforward courtesy. If you have documentation you didn't pass along, now's a good time to share it. A two-minute conversation or email with the installation paperwork doesn't cost you anything and helps the new owners manage the system responsibly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "The buyer wants to know if the radon system needs annual maintenance. What should I tell them?", "answer": "Most radon mitigation systems are designed to run continuously with minimal maintenance. The main thing to do is visually check the manometer (or indicator gauge) periodically to confirm suction is present, and listen for any changes in fan noise that might indicate wear. Having a professional check the system every few years is a reasonable practice, particularly if they ever notice the indicator showing no suction. The fan is the only moving part, and fans do eventually wear out and need replacement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "I've seen some sellers describe their house as having \"radon mitigation already done\" as a positive in the listing. Is that actually a selling point or a red flag?", "answer": "For radon-aware buyers, it's a positive - it signals that the seller tested and addressed a known issue. In high-radon regions where buyers expect to deal with this, \"mitigated with post-test documentation\" is genuinely a favorable detail. Only buyers who don't understand what mitigation is would read it as a red flag, and those buyers need education, not a different house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "A flipper I know said he never discloses radon because he claims he \"forgot\" to test. Is that a good strategy?", "answer": "No. Deliberate ignorance isn't a legal shield, and if a buyer later discovers elevated radon and can show you had reason to know or reason to test, the situation gets complicated. Testing and disclosing what you find is the straightforward approach that keeps sellers out of trouble.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Practical Selling Scenarios", "question": "I fixed radon, my buyer is thrilled, and we're closing next week. Is there anything I should pass along to make sure they manage the system right?", "answer": "Pass along the installation documentation, the post-mitigation test result, the contractor's contact information, and any warranty paperwork. Explain that the fan runs continuously and they should check the indicator gauge periodically. Tell them where the system is vented to the outside. It's a 10-minute handoff conversation that sets the new owner up to manage it correctly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "I'm selling a mobile home. Can it have a radon problem?", "answer": "Yes. Manufactured and mobile homes can have radon issues, particularly older models or those sited on a crawl space rather than a full basement. The floor construction and undercarriage sealing determines how much radon enters. Test the space the same way you would any other home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "I'm selling a condo on the third floor. Do I need to worry about radon?", "answer": "Third-floor condos are generally at very low radon risk because radon dissipates as it moves up through a building. Testing isn't typically a concern at that height. If your condo is ground floor or partially below grade, that's a different situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "I'm selling a townhouse. My unit shares walls with neighbors. How does radon work in that case?", "answer": "Radon enters through your unit's own floor and foundation contact, not through shared walls. Your reading can be completely different from the unit next to you even if you share a party wall. Test your unit independently - your neighbor's result tells you nothing reliable about your own.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "I have a slab-on-grade house with no basement. Do I need to test for radon before selling?", "answer": "Yes. Slab-on-grade homes can still have elevated radon - the gas enters through cracks, control joints, and penetrations in the slab. Radon doesn't require a basement to accumulate. Ground-floor living space on a slab is worth testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "I'm selling a house with a stone foundation and dirt floor basement. Is that higher risk?", "answer": "Stone foundations and dirt floors are common entry points for radon - they're much less airtight than poured concrete. That type of construction is generally considered higher risk, though testing is the only way to know your actual levels. Mitigation in these homes can sometimes require a different approach than standard sub-slab depressurization.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "I'm selling a new construction home I built myself. Do I need to test even though it was just built?", "answer": "New construction can have radon levels just as elevated as older homes - sometimes more so if the tight envelope traps gases that older drafty homes vented naturally. If you built in radon-prone geology, testing before listing is worthwhile. Some builders install radon-ready piping during construction, which makes future mitigation simpler if needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "I built a radon-resistant new construction home. The builder said I don't need to worry. Is that true?", "answer": "Radon-resistant construction features - sealed slab, stub-up pipe, vapor barrier - reduce radon entry but don't eliminate it. They make the home easier to mitigate if needed, and they often result in lower radon levels, but they don't warranty low levels. Testing is still the only way to confirm what's actually happening in the home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-seller-landlord-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "I'm selling a house with a finished basement. Does that affect how I test or mitigate?", "answer": "A finished basement can make testing and mitigation slightly more complex - the test device still goes in the lowest livable level, but accessing the slab for mitigation installation may require cutting through a finished floor or working from a mechanical room. It's all doable, just worth knowing when you're planning the process.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "I have a lake house with a walk-out basement I'm trying to sell. The buyer is asking about radon. Is a walk-out basement lower risk?", "answer": "Walk-out basements often have lower radon levels than fully below-grade basements due to better natural ventilation, but it's not a warranty. The soil contact on the enclosed sides of the foundation still matters. Test it and know what you're dealing with rather than assuming the walk-out configuration makes it low risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-seller-landlord-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "I'm selling a house with a sump pump in the basement. I've heard that affects radon. Is that true?", "answer": "A sump pit can be a radon entry point if it's open or poorly sealed. Some mitigation systems actually use the sump pit as a suction point, which is an elegant solution in homes that already have the pit. If your radon test comes back elevated, a contractor will look at the sump configuration as part of the assessment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "A buyer offered over asking and waived everything including inspection. The house has an existing mitigation system. Should I say anything?", "answer": "Yes. When you have an existing mitigation system, disclosing it - along with any test results you have - is appropriate. The buyer is buying the house as-is, but they should know what they're buying. A mitigation system is a material feature of the property.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "In a hot market, can I just skip the radon conversation and hope buyers don't notice?", "answer": "Even in competitive markets, buyers who are serious about radon will test. And in many markets, testing has become standard regardless of conditions. Sellers who skip the radon conversation and have it surface during inspection are in a worse negotiating position than sellers who got ahead of it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in Specific Property Types", "question": "Buyers in my area seem really radon-aware. Every offer I've gotten has a radon contingency. Is that becoming standard?", "answer": "In high-radon regions, yes. Radon contingencies - or radon-specific inspection contingencies - have become standard in many Midwest and Northeast markets. Buyers, their agents, and home inspectors are more educated than they were 10-15 years ago. Getting ahead of this with a pre-listing test is more valuable than ever.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Mitigation Decisions", "question": "My tenant said they're leaving because of the radon. I'm now mitigating. Should I let them out of their lease?", "answer": "That's a landlord-tenant legal question beyond what I can advise on here. From a practical standpoint: mitigate, re-test, and share the results with your tenant. Some tenants will reconsider when they see the levels are resolved. Others will still leave. The fix is the right thing to do regardless of what the tenant decides.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Mitigation Decisions", "question": "I have two units. One has elevated radon and the other doesn't. Should I only mitigate the one that tested high?", "answer": "Mitigate where the levels are elevated. If the second unit tested low and has a different foundation footprint or configuration, it may genuinely be low-risk. If they share a foundation, have a radon professional assess whether one system can address both or whether only the affected area needs treatment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Mitigation Decisions", "question": "My tenant keeps citing radon every time they want something. I tested and the result was 3.2. Am I obligated to do anything?", "answer": "3.2 is below the EPA action level of 4.0. The EPA acknowledges there is some risk in the 2.0-4.0 range, but at 3.2 you're below the threshold where action is recommended. Share the test result with your tenant in writing. That creates a documented record of both the level and your response.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Mitigation Decisions", "question": "I installed a mitigation system in my rental and the tenant is now saying they can hear the fan at night. Do I have to do anything about that?", "answer": "Fan noise is a real consideration. Some fans are louder than others, and if the fan is located near a bedroom or living area, the noise can be noticeable. Talk to the mitigation contractor - sometimes the fan can be relocated, a quieter model can be substituted, or vibration dampeners can reduce the noise. It's a solvable problem in most cases.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Mitigation Decisions", "question": "My tenant is asking me to test their unit every year. Is annual radon testing required for rentals?", "answer": "Annual testing is not typically a legal requirement for most landlords. Even so, periodic testing - every 2-3 years, or after any significant changes to the building like foundation work - is reasonable practice. Whether to agree to annual testing as a lease term is a business decision you make based on your relationship with the tenant and your risk posture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Mitigation Decisions", "question": "I have a rental property in a county the EPA classifies as Zone 1 (highest radon potential). Does that affect my obligations?", "answer": "EPA Zone designations are guidance for prioritization, not legal requirements. Being in Zone 1 means there's elevated geological risk and testing is especially worthwhile. It doesn't by itself create a legal obligation, but it's very strong reason to test every ground-floor and basement unit you own in that area.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Mitigation Decisions", "question": "I manage a rental and the tenant claims the mitigation system \"isn't working.\" I checked the gauge and it looks fine. What now?", "answer": "If the manometer or visual indicator shows suction, the system is creating the negative pressure it's designed to create. A test is the only way to confirm what radon levels actually are. Schedule a professional test and share the results with the tenant. That replaces the claim with data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Mitigation Decisions", "question": "I mitigated a rental unit and the post-test showed 1.8. My tenant is still worried. What else can I do?", "answer": "1.8 is a genuinely low result. At that point, you've done what mitigation is designed to do. Share the test documentation, explain what 1.8 means in context - it's well below the EPA action level - and acknowledge that radon cannot be eliminated entirely from any home. If the tenant continues to have concerns beyond what the data shows, that's a conversation about their comfort level, not about radon levels that require more action.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Mitigation Decisions", "question": "I just bought a rental building and realized none of the units have ever been tested. How should I approach this?", "answer": "Systematically. Test every ground-floor and basement unit first - those are highest risk. Create a testing log that documents the unit, the date, the result, and who conducted the test. If any units come back elevated, mitigate and re-test. Build this into your baseline property documentation for the building. It's a one-time investment that creates clarity going forward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Landlord Mitigation Decisions", "question": "My tenant found a pipe in the utility room that they think is a radon vent. I have no idea if there's an actual system or just an abandoned pipe. How do I figure it out?", "answer": "Have a qualified radon professional inspect the installation. They can determine whether it's a functional system, an incomplete installation, or just an unrelated pipe. If it's a system, they can assess whether it's operating correctly and what the suction levels look like.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Inherited and Estate Sales", "question": "I'm the executor of an estate selling a house. There's no radon history at all. Should I test before listing?", "answer": "Yes, if it's practical. A pre-listing test in the estate context works the same way as any other sale - it gives you information and prevents unwelcome surprises during the buyer's inspection. Even if you don't have time to test before listing, be transparent that there's no known radon history on the property.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Inherited and Estate Sales", "question": "My aunt's house has been sitting empty for two years. I'm now selling it. Would the radon levels be different in an unoccupied house?", "answer": "An unoccupied house that's been sitting closed can accumulate higher radon levels than an actively occupied and ventilated one. Test it under standard conditions - closed house for 12 hours prior, normal HVAC running - to get a result that reflects what it would look like to a buyer testing it. Don't assume the levels are representative of anything just because it sat empty.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Inherited and Estate Sales", "question": "I'm handling my father's estate. His house sold as-is to a cash buyer. The buyer is now complaining about radon. Do I have to deal with that?", "answer": "Once a sale closes, the new owner owns the property and its issues. Whether they have any claim against the estate depends on what was disclosed, what the purchase agreement said, and your state's laws. That's a legal question. From a practical standpoint, your obligation should have ended at closing unless there was specific fraud or concealment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Inherited and Estate Sales", "question": "The house I inherited has no radon history. I tested it before listing. It came back at 11.0. What do I do?", "answer": "That's a high reading and it should be addressed before listing if at all possible. Get a professional mitigation system installed, run a post-test, and list with documentation showing the issue was found and resolved. A pre-mitigation result of 11.0 with a post-test under 2.0 is actually a story that shows responsible ownership. Call or text Bill and we can talk through what the numbers mean for your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon and Property Value", "question": "Will elevated radon actually lower my home's appraisal?", "answer": "Radon itself isn't typically something an appraiser formally adjusts for - it's more of a negotiating factor between buyer and seller. However, if a radon issue delays a transaction or causes deal complications, the practical effect on your net proceeds can be significant. A mitigated home with documentation avoids that friction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon and Property Value", "question": "My buyer's real estate agent is telling my buyer that a house with a radon system is \"less desirable.\" Is that a fair characterization?", "answer": "It's not an accurate characterization in most cases. A house with a functioning, documented mitigation system is a house where a known issue was found and professionally resolved. The alternative - a house with no radon history at all - doesn't mean it doesn't have radon; it just means no one checked. A mitigated home often has better documentation than a never-tested one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon and Property Value", "question": "I fixed the radon and I want to advertise \"radon-free\" in my listing. Can I say that?", "answer": "No - \"radon-free\" is a claim that can't be supported. All homes have some level of radon; the question is whether it's at a level that warrants action. What you can accurately say is \"radon mitigated\" or \"radon system installed - post-test confirmed levels below EPA action level.\" That's accurate, honest, and actually more meaningful than \"radon-free.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon and Property Value", "question": "My buyer's inspector said the mitigation system is \"adequate.\" What does that mean exactly?", "answer": "\"Adequate\" in that context usually means the system appears to be functioning - fan running, pipe intact, indicator showing suction. It's not a strong endorsement, but it's not a red flag either. If you want a more detailed assessment, have a radon professional evaluate the system specifically. But an inspector saying \"adequate\" generally means they didn't find a glaring problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon and Property Value", "question": "My house has been sitting on the market and I think the radon result from the inspection is scaring buyers away. What should I do?", "answer": "If you had a prior buyer's test come back elevated and the deal fell through, mitigate now - before the next buyer's inspection. Then update your listing to indicate the system is installed and retested. That changes the narrative from \"house with elevated radon\" to \"house with resolved radon and documentation.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in New Tenant Move-In Process", "question": "Should I include radon test results in my standard move-in documentation packet?", "answer": "Yes, if you have them. Including your most recent radon test result - especially if you've tested and confirmed low levels or completed mitigation - tells the tenant you're a responsible landlord and gives them a baseline. It's a small thing that builds trust.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in New Tenant Move-In Process", "question": "A prospective tenant asked about radon before signing a lease. I've never tested the unit. What do I say?", "answer": "Tell them you haven't tested and offer to test before they move in. Following through on that is both responsible and practically useful - it gives you documented baseline data and answers their question with evidence rather than guessing. Tenants who ask about radon before signing tend to stay longer-term when their concerns are taken seriously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in New Tenant Move-In Process", "question": "My new tenant is asking me to add radon monitoring to their lease as a landlord responsibility. Is that reasonable?", "answer": "It depends on what monitoring means in that context. Agreeing to periodic testing - say, every two years - is a reasonable landlord commitment. Agreeing to install a continuous monitor and respond to every reading fluctuation is a different level of commitment. Be specific about what you're agreeing to before it's in a lease.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in New Tenant Move-In Process", "question": "I tested my rental unit right before a tenant moved in. The result was 2.6. Should I share it with them?", "answer": "Yes. Sharing it is the transparent thing to do. 2.6 is below the EPA action level - context you can provide alongside the number. Tenants who receive proactive test results generally have more confidence in their landlord.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in New Tenant Move-In Process", "question": "My new tenant wants to bring in their own radon testing company before they'll sign a lease. Should I allow that?", "answer": "Yes. If a prospective tenant wants independent verification, letting them test is a simple way to build trust. If your unit's levels are low, their test will confirm it. If levels are elevated, you'd rather know before they move in than after.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in New Tenant Move-In Process", "question": "I've had the same tenant for five years. Should I re-test for radon?", "answer": "Periodic re-testing is good practice, especially if you've never tested or if the last test was many years ago. Five years is a reasonable interval to check in. Conditions can change - foundation settling, nearby construction, changes in HVAC configuration - that could affect radon levels. A quick test gives you a current picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in New Tenant Move-In Process", "question": "My tenant is moving out after three years in a ground-floor unit I've never tested for radon. Should I test during the turnover?", "answer": "Yes - turnover is the right time. Test before the next tenant moves in so you have current data and can address anything elevated before someone new is living there. You also now have a baseline for any future questions from either the departing or incoming tenant.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Radon in New Tenant Move-In Process", "question": "I have a tenant who's been in a basement unit for 8 years and I've never tested for radon. She's renewing her lease. I'm feeling guilty. What should I do?", "answer": "Test now and be transparent with her about the results. Guilt isn't the right framework, but action is. She's your tenant and you have a responsibility for the conditions of the space she's been living in. If the levels are elevated, get mitigation in place promptly. If they're low, you have documented evidence that things are fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Cross-Cutting Questions Sellers and Landlords Both Ask", "question": "What's the difference between a short-term and long-term radon test, and which one should I use for a sale?", "answer": "Short-term tests run 48-96 hours and are the standard for real estate transactions because they fit within inspection timelines. Long-term tests run 90 days or more and provide a better picture of average annual exposure. For a home sale, short-term is the norm. For landlords wanting baseline documentation that reflects typical conditions year-round, a long-term test is more informative.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Cross-Cutting Questions Sellers and Landlords Both Ask", "question": "I keep hearing about \"charcoal canisters\" and \"electronic monitors\" for radon testing. What's the difference?", "answer": "Charcoal canisters are passive devices left in place for 48-96 hours and then mailed to a lab for analysis. Electronic continuous monitors measure radon levels at regular intervals throughout the test period and produce a result directly. Both are accepted methods. Continuous monitors also show how levels fluctuated during the test, which can be useful information if there are questions about conditions during the test window.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Cross-Cutting Questions Sellers and Landlords Both Ask", "question": "How soon after installing a mitigation system can I test to confirm it worked?", "answer": "Most contractors recommend waiting at least 24 hours after installation before starting a post-mitigation test, to allow conditions to stabilize. A 48-hour short-term test starting the day after installation is the typical post-mitigation verification approach. Some contractors will test immediately, but a brief settling period gives more representative results.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Cross-Cutting Questions Sellers and Landlords Both Ask", "question": "Can a mitigation system affect my heating and cooling costs?", "answer": "Yes, slightly. A sub-slab depressurization system draws air from under the slab and exhausts it outside. In winter, this pulls some conditioned air from the building along with the radon - the effect is generally minor but real. Modern systems are designed to minimize this impact, and the energy cost is small relative to the benefit. It's worth knowing but it's not a reason not to mitigate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Cross-Cutting Questions Sellers and Landlords Both Ask", "question": "I've been reading that radon causes lung cancer. How much exposure is actually dangerous?", "answer": "Radon is the second-leading cause of lung cancer in the U.S., behind smoking. The risk comes from long-term cumulative exposure - years of breathing elevated radon, especially in combination with smoking, significantly increases lung cancer risk. There's no level of radon exposure that carries zero risk, but the practical focus is on reducing elevated levels because that's where the meaningful risk reduction happens. This is a conversation worth having with a doctor if you have specific health concerns.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Cross-Cutting Questions Sellers and Landlords Both Ask", "question": "Why does radon matter more in the basement than upstairs?", "answer": "Radon enters from the soil, so it's most concentrated at the lowest levels of the home - right at the point of entry. As it moves up through the building, it dilutes with air from other sources. Ground-floor rooms and basements accumulate higher concentrations than second or third floors. That's why testing is always done on the lowest livable level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Cross-Cutting Questions Sellers and Landlords Both Ask", "question": "Is there any time of year that's better for testing radon?", "answer": "Winter testing often produces the highest readings because houses are closed, ventilation is reduced, and frozen ground increases soil pressure. Summer testing in open houses can produce lower readings. For real estate transactions, closed-house testing protocols are meant to standardize conditions regardless of season. A result done under proper closed-house protocol is valid regardless of when it was taken.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Cross-Cutting Questions Sellers and Landlords Both Ask", "question": "My contractor said he'll \"warranty\" the radon will go below 4.0 after mitigation. Should I trust that?", "answer": "No reputable contractor should use the word \"warranty\" in relation to a specific post-mitigation result - radon levels vary, and even the best system can't be promised to hit a specific number. What a good contractor can tell you is that their installation will significantly reduce levels in the vast majority of cases, and that they'll work with you if the first test doesn't show satisfactory results. Language like \"we'll make it right if it doesn't come down\" is more honest than a hard warranty.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-seller-landlord-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Cross-Cutting Questions Sellers and Landlords Both Ask", "question": "Bill, what do you actually recommend for someone selling a house who's never dealt with radon before?", "answer": "Test before you list. If it's above 4.0, fix it before you list. Share all the documentation with buyers. That's the cleanest path. You control the timeline, you don't get blindsided during inspection, and you go to closing with a paper trail showing you took it seriously. If you're not sure where to start, give us a call and we can walk through what makes sense for your specific situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "My buyer is a doctor and is asking really detailed questions about radon risk. I don't know how to answer them.", "answer": "You don't need to be a radon scientist to sell your house. Answer what you know - the test result, what action was taken, when it was done, what the post-test showed. For specific questions about health risk and medical significance, their doctor is the right resource, not you. You're disclosing a measurement, not practicing medicine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "The buyer's agent keeps using the word \"contamination\" when talking about my house's radon level. Is that accurate language?", "answer": "Not really. Radon is a naturally occurring gas present in virtually all soil to varying degrees - it's not contamination in the way that phrase usually implies (a pollutant introduced from outside). Elevated radon in a home is a ventilation and entry-point issue, not a soil contamination problem. The language is alarmist, though the underlying issue is real.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "A buyer told me my radon level is \"10 times the safe level.\" Is that how it works?", "answer": "The EPA doesn't frame it that way. The EPA action level is 4.0 pCi/L - levels at or above that are recommended for mitigation. The EPA also notes that no level is without some risk. If your level was 4.0 and the buyer is calling it \"10 times safe,\" that's imprecise framing. The meaningful question is whether it's above the action level and whether mitigation addresses it - not how many multiples of some threshold it represents.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "How do I stay calm during radon negotiations when the buyer's agent is being dramatic about it?", "answer": "Keep the focus on the data and the solution. You have a test result, you have a mitigation option, and you have a post-test that can confirm it worked. Drama in negotiations usually comes from uncertainty - the more factual information you can provide, the less room there is for alarm. If you need help framing the situation accurately, that's a good reason to loop in someone who works with radon regularly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "The buyer's real estate agent said radon \"can't be fixed\" and that my house will always be a problem. Is that true?", "answer": "No. That's not accurate. Radon mitigation is a proven, effective solution. A properly installed sub-slab depressurization system reduces radon in the vast majority of homes to below the EPA action level - often dramatically. The fix doesn't wear out the radon, but the system manages it as long as it's running. Mitigation is not a temporary patch; it's an ongoing solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "The buyer wants a written statement from me personally warrantying the radon stays below 4.0 after mitigation. Should I sign that?", "answer": "No - you shouldn't personally warranty a specific post-mitigation result. Radon levels fluctuate, and future conditions aren't something you can warrant. What you can provide is documentation of the work that was done and the post-test result at the time. Having a mitigation contractor provide their standard workmanship warranty is more appropriate than a personal warranty from you as the seller.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-real-estate-seller-landlord-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "My realtor said the buyers \"don't understand radon.\" How do I help without making it feel like I'm coaching the other side?", "answer": "The best thing you can do is share clean documentation - test results, installation records, post-mitigation confirmation - and let the numbers speak for themselves. You can also suggest that their agent or inspector explain the standard interpretation of those results. You're not coaching them; you're providing factual information about your property.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "My buyer's home inspector is not a certified radon professional. Does their test count?", "answer": "Radon testing by home inspectors varies by state. In some states, home inspectors are qualified to conduct radon tests; in others, radon testing requires separate certification. Whether the inspector's test is accepted depends on your state's rules and what your purchase agreement requires. If there's a question about the test's validity, a certified radon professional conducting a separate test resolves it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "I'm a landlord and I want to know how to explain radon to a skeptical tenant who thinks it's just a company trying to sell them something.", "answer": "Explain that radon is a naturally occurring gas that comes from uranium in the soil - it's not manufactured, it's not sold, and it doesn't benefit anyone for it to exist in a home. The EPA, CDC, and surgeon general have all identified long-term elevated radon exposure as a real lung cancer risk. Testing to know what the levels are is just information. What you do with that information is up to you.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "My tenant said they saw an ad for a radon company and now they're convinced my rental is deadly. How do I handle the overreaction?", "answer": "Take the concern seriously without matching the alarm level. Offer to test the unit professionally. When the results come back, share them plainly. If the levels are low, the data is your best response to overreaction. If the levels are elevated, the data tells you both what needs to happen. Either way, an actual measurement beats a fear based on an advertisement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "I'm trying to sell fast and a radon issue just came up. What's the absolute fastest path through this?", "answer": "Get a contractor on the phone today. Explain your timeline. Many mitigation contractors can install a system within a few business days if they have availability. Schedule the installation, run the 48-hour post-test immediately after, and hand the documentation to the buyer's agent. That's the fastest path: move immediately, don't deliberate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "Should I be present when the radon mitigation system is installed in my house?", "answer": "You don't have to be, but being there for at least part of the installation is useful if you're the one who's going to be explaining the system to buyers. You'll understand where the pipe enters, where the fan is located, and where it vents. That knowledge helps you answer buyer questions confidently.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "I'm selling a rental property. The current tenant is cooperative but asked me to compensate them for the inconvenience of the mitigation work. Is that normal?", "answer": "Some landlords offer a small rent credit for the inconvenience of having contractors in the unit. Whether that's standard depends on your market and your relationship with the tenant. The work is typically completed in a few hours, so the inconvenience is minimal. A reasonable gesture goes a long way if you have a tenant you want to retain.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "What happens if the buyer's radon test device was accidentally disturbed or moved during the test period? Does the test need to be re-done?", "answer": "If the test device was moved significantly, placed in a non-standard location, or the test conditions were otherwise compromised, the test should be re-done. Most inspectors and testing protocols note the placement and conditions at setup and retrieval. A disturbed test is a reason for a fresh test, not a reason to accept a potentially invalid result as definitive.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "I've been a landlord for 20 years and never thought about radon. Am I behind?", "answer": "Better late than never - and you're not as far behind as you might think. Many longtime landlords are in the same position. The practical step is to start testing your properties systematically, beginning with any ground-floor or basement units. Once you have baseline data for your portfolio, you can make informed decisions about which properties to prioritize. Fill out the form on the website or give us a call if you want to talk through a practical testing plan.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-real-estate-seller-landlord-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-real-estate-seller-landlord", "category": "workflow-real-estate-seller-landlord", "subtopic": "Handling Radon Conversations With Buyers and Agents", "question": "I'm selling and I want to know: once the mitigation system is running, is it something the new owner has to think about at all?", "answer": "They should check in on it periodically - visually confirm the indicator shows suction, listen for any changes in fan performance, and have a professional take a look every few years or if the indicator ever stops showing suction. And they should re-test the air in the house every 2-3 years to confirm levels remain low. The system runs largely on its own, but it's not entirely set-and-forget for a lifetime.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "workflow-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "Why is my radon higher in winter?", "answer": "A few things work together to push radon up in winter. Your house is sealed tight - windows closed, fresh air intake minimal - so radon that enters has nowhere to go. Cold air outside is denser than warm air inside, which creates a stronger stack effect: your house acts like a chimney, pulling air up from the soil through cracks and gaps in the foundation. Higher readings in winter are common and expected, which is also why winter is actually a good time to test - you'll capture what your family is typically exposed to during the months you're indoors the most.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "My radon doubled after we closed the house up for winter. Is that a problem?", "answer": "That's a pretty classic pattern. When you close the house for the season, you're eliminating the passive dilution that open windows and doors provide, and the stack effect gets stronger as outdoor temps drop. If your number doubled from, say, 2 pCi/L to 4 pCi/L, that puts you right at the EPA action level and warrants a closer look. If it went from 3 to 6, that's worth addressing. It's not a sign something broke - it's just what radon does in a sealed house. The fix, if needed, is mitigation, not opening windows permanently.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "In Illinois, does the ground freezing affect radon levels?", "answer": "Yes, it can. When the ground surface freezes solid, it acts like a cap over the soil - radon that would otherwise escape into the open air gets redirected sideways and can find its way into your basement instead. Illinois winters with hard freezes and snow cover are exactly the conditions that tend to push indoor radon higher. It's one reason radon testing during December through February often shows the highest readings of the year for Illinois homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "My radon has been slowly rising since fall. Is that normal?", "answer": "That's a pretty textbook pattern in the Midwest and similar climates. As temperatures drop in fall and you close the house up, radon creeps up. Frozen ground in December makes it worse. Readings often peak somewhere in January or February and then start to ease a bit as the soil thaws in spring and you occasionally crack windows. If the number is staying below 2 pCi/L, it's lower risk. If it's climbing toward or above 4, that's when it's worth taking action rather than just watching the trend.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "Does radon go down in spring? Mine dropped a lot after March.", "answer": "Yes, spring tends to bring radon levels down for most homes. The ground thaws and becomes more porous again, which lets radon vent naturally into the outdoor air. You start opening windows more often, which dilutes what builds up. The temperature difference between indoors and outdoors narrows, weakening the stack effect that pulls soil gases in. A drop in spring is normal - but if your levels were high all winter, that's still cumulative exposure worth thinking about.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "Should I test for radon in winter or summer? I've heard conflicting things.", "answer": "Both tests are valid if done under closed-building conditions, but winter tests typically reflect the worst-case scenario - which is actually what you want to know. If you test in winter and the number is below 2 pCi/L, you can feel pretty good. If you test in summer with windows open and get a low number, that might be misleading because it's not showing you what your family breathes during the 6 months you're sealed up inside. Most professionals will tell you a cold-weather test gives you the fuller picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "My radon test was done in summer with windows open. Is the result valid?", "answer": "Technically the test is invalid under EPA testing protocols if windows were open, because open-building conditions artificially dilute the reading. You might be getting a number that's meaningfully lower than what your home sees in fall and winter. It's not worthless information - it tells you about summer conditions - but if you're trying to make a decision about mitigation, a test under closed-building conditions (windows and exterior doors closed for at least 12 hours before and during the test) gives you a much more reliable baseline.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "Does the season I test in affect my results? My neighbor tested in July and got 1.8 and I tested in November and got 4.2.", "answer": "Absolutely. Season is one of the biggest variables in radon testing. Summer tests in open homes routinely come in 30-60% lower than winter tests in the same house. Your neighbor's 1.8 in July might look very different if they tested in November under the same conditions you did. This doesn't mean their home is fine - it might be above 4 in winter too. It's one reason EPA protocols require closed-building conditions to make any two tests comparable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "My radon is lower in spring than fall. Why?", "answer": "In spring, the ground is thawing and has better porosity, so radon escapes into the outdoor air more freely instead of channeling into your home. You're also likely opening windows, which dilutes indoor levels. The temperature gap between outside and inside narrows, reducing the stack-effect suction that pulls soil gases up through foundation cracks. Fall tends to have higher readings because the house is newly sealed, the soil is beginning to compact, and that pressure differential is growing again. Spring being lower is completely normal.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "We're in Minnesota and our radon is consistently around 5 in winter. Should we just wait and test in summer?", "answer": "I'd be cautious about that approach. If you're consistently at 5 during the winter months, you're well above the EPA action level during the period when your family is indoors the most - typically 6 months a year or more in Minnesota. Even if summer drops it to 2 or 3, the winter exposure is real. The cumulative exposure from high winter readings adds up. Rather than waiting to see a lower summer number, it's worth addressing the problem that's already showing up in the data you have.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "My radon monitor shows a seasonal pattern - high in winter, lower in summer. Is the monitor broken or is this real?", "answer": "That's real, and it's actually one of the signs a continuous monitor is working correctly. A radon monitor that shows the same flat reading year-round in an unsealed home would be more suspicious. The seasonal swing is caused by real changes in pressure, temperature, building operation, and soil conditions. A good monitor tracks that faithfully. The concerning scenario would be if the winter peaks are consistently high - that's useful information, not a malfunction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "My radon peaked at 8 pCi/L in January and is down to 3.5 in June. Which number should I act on?", "answer": "The January number is the one that tells you what your family is breathing during the months you're most at home. A peak of 8 during your peak occupancy season is significant. The fact that it drops to 3.5 in summer doesn't cancel out the January exposure - it averages out to something between the two, and radon risk is about cumulative dose over time. When winter peaks are consistently above 4, mitigation is the right call. You don't want to manage it by just looking at the summer number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "I got a 4 pCi/L test result in October. Will it be higher in January?", "answer": "Probably, yes. October is a transitional month - you've likely closed the house up recently but the ground isn't frozen yet and the temperature differential between inside and outside is still moderate. January in most of the Midwest and Northern states tends to push levels higher. If you're at 4 in October, it's reasonable to expect January might show 5 or 6. That October number is already at the EPA action level, so you don't really need to wait for January to decide - it's a good time to look at mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "We have a vacation cabin that's empty all winter. When I open it in May, is the radon dangerous?", "answer": "Radon accumulates when a building is tightly closed and unventilated, so yes, a sealed cabin over winter can have very elevated levels when you first open it. Standard practice is to open windows and ventilate thoroughly for at least a few hours before spending extended time inside. Then test to understand the baseline - short-term tests work fine for this. If the cabin is used regularly enough to be a meaningful exposure source, it's worth knowing the numbers and potentially mitigating if they're high.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "Does radon get worse every winter, or does it stabilize?", "answer": "For most homes without mitigation, the seasonal pattern tends to repeat year over year rather than getting progressively worse each winter. What changes winter to winter is usually occupancy habits, weatherization upgrades (new windows, added insulation), and any changes to the HVAC system. If you've added significant air-sealing or insulation, that can push winter levels a bit higher than the previous year. But absent those changes, you'll generally see similar peaks from one winter to the next.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "My radon test in winter was 3.8 pCi/L. Is that basically 4?", "answer": "Honestly, yes - from a practical standpoint, 3.8 is right at the threshold. The EPA recommendation is to fix at 4.0, and the difference between 3.8 and 4.0 is within the margin of any test's accuracy. If I were advising a homeowner with a 3.8 in winter, I'd treat it the same way I'd treat a 4.2. The EPA also notes that levels between 2 and 4 carry real risk - it's a gradient, not a cliff. At 3.8 in winter, mitigation is a reasonable and defensible choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "We have forced air heat and our radon seems higher when the furnace runs constantly in January. Is that a coincidence?", "answer": "Probably not a coincidence. Forced-air furnaces can depressurize the basement and lower levels of the home as they draw combustion air and circulate air through ductwork - especially older furnaces. That depressurization pulls more soil gas in through foundation cracks. January means the furnace is running hard and your house is tightly sealed, so both factors are working together. If the furnace was recently replaced or had service work done, that's also worth mentioning to whoever evaluates your radon situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "Is there any month where radon is almost always at its lowest?", "answer": "For most homes in northern climates, late spring and summer - roughly May through August - tend to show the lowest radon readings. Windows and doors are open more often, the temperature differential driving the stack effect is smaller, and the soil is more permeable and can vent gas naturally. But \"lowest\" is relative - if your home's baseline is high, even the summer low might be above 4 pCi/L. Lowest doesn't mean acceptable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "My radon was fine when we moved in (tested in August). Now it's winter and I'm seeing 6 pCi/L on my monitor. Was the original test wrong?", "answer": "The original test wasn't necessarily wrong - it might have accurately reflected August conditions in an open house. But August in an open house is not the same as January in a sealed house. The conditions are so different that the results aren't directly comparable. The August test told you what summer levels were; the monitor is now telling you what winter looks like. The winter reading is the one that represents your highest-exposure period, and 6 pCi/L is worth addressing regardless of what the summer test showed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "Does cold weather make radon more dangerous, or just more concentrated?", "answer": "The radon itself doesn't change - it's the same decay chain whether it's January or July. What changes in cold weather is concentration: you're getting more radon per cubic foot of air because the house is sealed and the pressure dynamics are drawing more in. Higher concentration means higher dose per breath, which means more exposure over time. The danger is the cumulative radiation dose to lung tissue, and higher concentrations in the months you spend the most time indoors adds up faster.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Winter and Cold-Weather Radon", "question": "My heating bills went way up and now my radon monitor is reading higher. Are they connected?", "answer": "They might be indirectly. If higher heating bills reflect tighter house sealing - better weatherstripping, sealed windows, reduced air infiltration - that same tightness traps radon more effectively. A tighter envelope is great for energy efficiency but it does tend to concentrate indoor radon if there's a source in the soil beneath you. The two trends can absolutely be related, and it's worth noting this pattern when you talk to someone about mitigation options.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Summer and Warm-Weather Radon", "question": "Why is my radon lower in summer?", "answer": "In summer, most people have windows and doors open at least part of the day, which dilutes radon quickly. The temperature difference between inside and outside is much smaller, so the stack effect - the pressure-driven suction that pulls soil gas up through your foundation - is weaker. The soil also tends to be more permeable when it's not frozen, so radon vents naturally into the outdoor air rather than channeling into your home. It adds up to meaningfully lower indoor levels for most houses.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Summer and Warm-Weather Radon", "question": "My radon is 0.8 pCi/L in summer. That's great, right? Can I stop worrying about it?", "answer": "It's a low summer reading, and that's good news, but I'd want to know what it looks like in January before you stop thinking about it. A summer reading of 0.8 could easily be 2-3 in winter for the same home. If you have a continuous monitor, check the trend as fall arrives and the house closes up. If you're relying on a short-term test, a winter test would give you the fuller picture. A summer 0.8 is reassuring, but it's not the whole story.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Summer and Warm-Weather Radon", "question": "We tested in June with all the windows closed and got 2.1 pCi/L. Is that a reliable result?", "answer": "A June test with windows closed is more reliable than one with windows open, and 2.1 is a lower-risk number. Even so, June conditions still tend to produce lower readings than January for most homes - the stack effect is weaker even with closed windows because the inside-outside temperature difference is smaller. You're probably looking at a number that's close to your summer baseline. It may rise somewhat in winter. It's reasonable to re-test in December or January to see the full range.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Summer and Warm-Weather Radon", "question": "My radon monitor shows 1.2 in July. Should I still consider mitigation?", "answer": "At 1.2 in July, you're below the range where most professionals would push hard for mitigation. But I'd encourage you to watch what happens as you head into fall. If it climbs to 3 or 4 by November and stays there through March, that's a meaningful portion of the year at an elevated level. A continuous monitor is great for exactly this - you can make a decision based on your actual annual pattern rather than one snapshot.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Summer and Warm-Weather Radon", "question": "Can I do my real estate radon test in summer if that's when we're closing?", "answer": "You can, and a short-term test in summer under closed-building conditions is valid for real estate purposes. Just understand that it may show a lower number than a winter test in the same home. If the summer test comes back at 3.5, there's a real chance winter is above 4. Some buyers request a winter re-test or ask for mitigation as a condition regardless of the summer result, especially in high-radon regions. It's worth knowing the seasonal context when interpreting the number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Summer and Warm-Weather Radon", "question": "My AC runs all summer and my radon is low. Does air conditioning lower radon?", "answer": "Air conditioning itself doesn't directly reduce radon - it recirculates indoor air rather than bringing in fresh outdoor air. But running the AC typically means windows and doors are closed, and it might also mean the system is moving air through the house in ways that affect pressure balance. The lower summer readings are mostly due to reduced stack effect and occasionally open windows and doors, not the AC itself. Don't count on AC as a radon control strategy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Summer and Warm-Weather Radon", "question": "My radon monitor has been at 0.4 pCi/L all summer. Is it working?", "answer": "That's a very low number but not impossible, especially in summer in a home without significant radon entry points. If you have outdoor air access, a well-ventilated basement, or you're in a lower-geology-risk area, 0.4 in summer is plausible. If you want to verify the monitor, you can place it outdoors for a day - outdoor background radon is usually 0.2 to 0.4 pCi/L, so a reading in that range outdoors would confirm it's functional. Then bring it back inside and watch the fall trend.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Summer and Warm-Weather Radon", "question": "We bought the house in summer and the inspector got a 2.8 pCi/L test. Now it's winter and my monitor shows 5.5. Who do I trust?", "answer": "Both readings are probably accurate for their respective conditions. 2.8 in summer under closed conditions is plausible, and 5.5 in a sealed winter house is also plausible for the same home. Radon doesn't behave the same year-round. The winter number is the one that represents your current exposure, and 5.5 pCi/L is above the EPA action level. I wouldn't spend energy deciding which test was wrong - I'd focus on what to do about the number in front of you now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Summer and Warm-Weather Radon", "question": "Does humidity in summer affect radon readings?", "answer": "Humidity itself doesn't directly affect radon concentration, but the behavior changes that come with humidity do. In humid summer months, windows and doors tend to be open with AC running, which has its own effects on air flow and pressure. Some sensors in consumer-grade radon monitors can be slightly affected by very high humidity, but it's generally a minor factor compared to ventilation patterns and pressure dynamics. If your monitor has a humidity sensor, extreme values - above 90% RH - could be worth noting when interpreting unusual spikes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "My radon went up when it rained. Why?", "answer": "Rain is one of the most common triggers for radon spikes, and there are a couple of mechanisms. Heavy rain saturates the soil and blocks the normal escape routes for radon - it pushes through cracks and gaps in your foundation instead of venting upward through the ground. Rain also often comes with falling barometric pressure, which reduces atmospheric pressure on your home and allows more soil gas to push inward. Both effects can happen at the same time, which is why a good storm often produces a noticeable spike on a radon monitor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "My Airthings spiked to 10 pCi/L after a big storm. Is that real or a sensor error?", "answer": "It's very likely real. Post-storm radon spikes are well-documented - the combination of saturated soil and low barometric pressure can push indoor radon to 2-3 times its normal baseline, sometimes more. A spike to 10 during a storm in a home that normally runs at 3-4 is not unusual. What matters for your health risk is the long-term average, not a single spike. Even so, if your baseline between storms is also elevated, the spike tells you there's a genuine entry pathway that deserves attention.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "Does snow on the ground affect radon?", "answer": "Yes, and significantly. A deep snow pack acts like a sealed cap over the soil - radon that would normally vent upward through the ground is blocked and redirected. Some of it finds its way into your home through foundation cracks and slab penetrations. This is one reason radon readings in January and February in northern climates are often the highest of the year. The snow cover effect compounds the already-high winter readings from the sealed house and strong stack effect.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "My radon jumped right before a storm. Is that common?", "answer": "Yes, it's a known pattern. Barometric pressure typically starts dropping 12-24 hours before a significant storm system arrives. As the pressure outside your home drops, the pressure differential between the soil beneath your foundation and your indoor air space grows - your house is essentially under less atmospheric \"weight\" pressing down from above, so soil gas pushes in more easily. Some people with sensitive monitors notice the uptick before the rain even starts. It's real physics, not sensor noise.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "Barometric pressure dropped and my radon spiked. What's the connection?", "answer": "Radon in the soil is always under some pressure from the gas generated by uranium decay. The atmosphere pushes down on the ground surface and, to some extent, into your home through walls and foundation. When barometric pressure drops - as it does before storms - there's less atmospheric pressure pushing back against that soil gas. The result is more radon finding its way through cracks, sump openings, floor-wall joints, and other gaps. It's one of the clearest cause-and-effect relationships in residential radon behavior.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "My radon is lower on sunny days. Is there a real connection?", "answer": "Generally yes, though indirectly. Sunny days tend to come with higher barometric pressure (fair weather), which increases the atmospheric load on your home and makes it harder for soil gas to push in. On sunny days you're also more likely to have windows open or be in and out of the house, which ventilates the space. The pattern - lower on sunny days, higher before or during storms - is real and reflects the pressure and ventilation dynamics going on. It's not the sun itself reducing radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "After a week of heavy rain, my radon is still elevated. Is the soil staying saturated?", "answer": "Possibly. If you've had prolonged heavy rainfall, the soil can stay saturated long enough that radon entry is elevated for days. It depends on your soil type - clay soils drain slowly and can hold moisture for a long time, keeping the normal vent pathways blocked. If the elevation is lasting more than a week after rain, it's also worth checking whether your basement took on any water during the rain event, since new cracks or water-entry pathways can also increase radon entry. A sustained elevation is worth monitoring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "Does a tornado or severe thunderstorm affect radon readings?", "answer": "Yes - a severe storm with rapid pressure drops can produce a sharp radon spike. Tornadoes in particular involve extreme low pressure that can pull large amounts of soil gas into a building very quickly. You might see unusually high short-term readings during and immediately after severe weather. For long-term exposure calculations, these spikes matter less than sustained baseline levels, but they're real events that your monitor will capture and they can temporarily push 24-hour or 7-day averages noticeably higher.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "My radon spiked to 15 pCi/L during a big rainstorm. Should I leave my house?", "answer": "No - a single storm spike to 15 is startling on a monitor but it's a short-term event, not a chronic exposure. Radon risk is about cumulative long-term exposure, not a few hours of elevated readings during a storm. The appropriate response is to open some windows to ventilate if you're concerned, note what your baseline looks like before and after the storm, and if the number stays elevated well after the storm passes, take that seriously. Evacuating over a storm spike would be an overreaction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "My radon was 2 pCi/L before the storm and 8 pCi/L two days after. It's back to 3 now. What happened?", "answer": "That's a textbook weather-driven radon event. The storm brought low pressure and likely saturated the soil, creating the conditions for elevated soil gas entry. Once the storm passed and pressure normalized, your readings came back down to near-baseline. The 3 pCi/L post-storm reading is slightly higher than your pre-storm 2, which could just be residual moisture in the soil. This pattern is real and expected. If your non-storm baseline is consistently below 4, you're in a reasonable range - though the soil beneath your home is clearly capable of sending radon in under pressure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "Does drought affect radon levels?", "answer": "Drought can sometimes reduce radon entry because dry, cracked soil allows radon to vent more freely into the outdoor air rather than building up pressure beneath your foundation. However, drought effects are inconsistent and vary by soil type and geology. In some homes, drought conditions create new shrinkage cracks in the foundation that can act as additional entry points. The effect isn't as consistent or dramatic as the rain-and-snow pattern, but it's a real variable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "Does wind affect my radon readings?", "answer": "Wind can have a modest effect. Strong winds around a building create localized pressure differences on different sides of the house, which can affect how much soil gas is pulled in through various entry points. Wind also increases air infiltration into the home, which can either dilute radon or - if the wind is driving air into the soil on the windward side - push more gas in. The effect of wind alone is generally smaller than the pressure drops associated with storm systems, but it's a real variable on a continuous monitor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "My radon went from 3.5 to 7 after a big snowstorm and stayed there for weeks. Is the snowpack keeping it high?", "answer": "That's entirely plausible. A deep, compacted snowpack that stays on the ground for weeks keeps the soil sealed and redirects radon toward your home continuously. If the snow is slow to melt, the elevated readings can persist. This is one reason late January through early March can be the worst sustained period for radon in cold-climate homes. Once the snow melts and the soil opens up again, you'd typically expect the readings to drop. If they don't come down after the snow is gone, that's worth paying attention to.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "My Airthings chart looks like a roller coaster - spikes every time it rains, drops when it's sunny. Is my monitor defective?", "answer": "No - that's actually a sign your monitor is doing its job. That roller-coaster pattern tracking rain events and pressure changes is one of the most consistent radon signatures in residential monitoring. A monitor that showed a perfectly flat line would be more suspicious. What you want to look at is the baseline between events - when the weather is calm and stable, where does it settle? That number is more diagnostic than the storm peaks.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Rain, Storms, and Weather Events", "question": "Rain brings my radon up to 9 or 10 pCi/L every time. My baseline is around 4. Should I mitigate?", "answer": "With a baseline of 4 and storm peaks regularly hitting 9-10, yes, I'd recommend looking at mitigation. The baseline is already at the EPA action level, and the storm spikes are adding meaningful short-term exposure on top of that. Mitigation - typically a sub-slab depressurization system - creates a pressure buffer that reduces radon entry both at baseline and during weather events. The storm spikes often shrink significantly after a system is installed because the pressure dynamics beneath the slab are changed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Barometric Pressure and Pressure Dynamics", "question": "What does barometric pressure have to do with radon in my basement?", "answer": "Radon gas builds up in the soil and pore spaces beneath your foundation. The weight of the atmosphere helps hold that gas in the ground - when barometric pressure is high, there's more downward pressure keeping soil gas from pushing into your home. When pressure drops, the atmospheric \"lid\" lifts and soil gas has an easier path into your basement through cracks, gaps, and slab penetrations. It's why radon monitors almost always show a correlation with weather pressure changes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Barometric Pressure and Pressure Dynamics", "question": "My radon seems to spike at night. Could that be pressure related?", "answer": "Barometric pressure does tend to fluctuate somewhat through a 24-hour cycle, but nighttime radon spikes are more often related to the thermal dynamics of the house. At night, the house cools and the temperature difference between inside and outside can grow, increasing the stack effect that pulls soil gas up. You're also unlikely to be opening and closing doors at night, so there's less incidental ventilation. Nighttime spikes are very common and the pressure connection is plausible but usually secondary to the thermal and ventilation effects.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Barometric Pressure and Pressure Dynamics", "question": "Can I predict my radon spikes by watching the weather forecast?", "answer": "Roughly, yes. Falling barometric pressure - associated with approaching low-pressure systems, rain, and storms - tends to bring radon up. High pressure and clear weather tends to correlate with lower readings. Watching a weather app's pressure trend can give you a loose prediction. Some Airthings users have noticed this correlation clearly in their data. It's interesting to track, but the practical takeaway is the same regardless: if your baseline is elevated, the storm spikes are a symptom, and mitigation is the real solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Barometric Pressure and Pressure Dynamics", "question": "Is \"stack effect\" the same thing as negative pressure in my basement?", "answer": "They're related but slightly different. Stack effect refers to the buoyancy-driven airflow in a building - warm air rises and exits through upper floors, which draws replacement air in through the lower levels. That process creates a pressure deficit in the basement and lower levels relative to the soil beneath. Negative pressure in the basement is the result. That negative pressure is what draws radon in through foundation cracks and floor-wall joints. Mitigation systems work by creating a more negative pressure zone beneath the slab than inside the basement, so the suction point is pulled away from the living space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Barometric Pressure and Pressure Dynamics", "question": "My radon is higher in the early morning than in the afternoon. Is that pressure?", "answer": "Partly pressure, partly temperature dynamics, and partly occupancy. In the early morning, the house has been closed and static overnight - the stack effect has been running all night pulling air up from the basement. Afternoon brings more activity: doors opening and closing, cooking, movement through the house, sometimes windows cracked. Afternoon pressure can also be slightly higher in fair weather. The morning high and afternoon dip is one of the most commonly observed daily radon patterns and it's real.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "My radon dropped when I ran my HVAC fan constantly. Is that a real fix?", "answer": "Running the fan continuously does circulate air through the house, which can dilute radon somewhat and reduce the extreme overnight peaks. But it's not a real mitigation strategy - you're mixing air, not removing radon at the source. As soon as the fan is off or the filter gets dirty, the radon comes back. A proper sub-slab depressurization system addresses the source. The fan effect can look convincing on a monitor but it's masking the problem rather than solving it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "Does running my furnace affect radon readings?", "answer": "Yes, it can. Furnaces - especially older ones that draw combustion air from inside the home - can depressurize the basement, which increases the pressure gradient that pulls radon in from the soil. The effect is stronger in older systems. Modern furnaces with sealed combustion don't have the same issue because they pull combustion air from outside. If you replaced an older furnace with a high-efficiency sealed-combustion unit, you might actually see radon go down slightly. If you went the other direction, the effect can go the other way.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "My whole-house fan lowers my radon readings significantly. Is that a real fix or just temporary?", "answer": "A whole-house fan moves large volumes of air through the home and can dramatically dilute radon while it's running. The readings drop because you're flushing the house with outdoor air. But the moment you turn the fan off, radon from the soil starts accumulating again. It's not fixing the entry pathway - it's just ventilating it away temporarily. You'd have to run the fan nearly continuously to maintain the effect, which isn't practical in most climates and doesn't work in winter. It's temporary, not a solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "My whole-house fan is off most of the year. Does it affect my radon testing?", "answer": "When a whole-house fan is closed, it's usually fairly well-sealed, so it shouldn't significantly affect testing when not in use. But when it's operating, yes - it's pulling enormous amounts of outdoor air into the home and would dramatically dilute radon readings. If you're doing a radon test, the whole-house fan should be off and the shutters closed. If it was running during a test, the results may be unreliable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "Does opening windows help with radon permanently?", "answer": "Opening windows helps while they're open. The dilution effect is real and immediate. But it's not a permanent solution - when you close the windows for winter (which is when radon is worst), the radon comes right back. In cold climates, you can't rely on open windows for radon management for most of the year. The permanent solution is a sub-slab depressurization system that intercepts radon before it enters the living space, so window position becomes largely irrelevant.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "My radon went up after I replaced my furnace. Is that connected?", "answer": "It can be. Furnace replacements change how the HVAC system interacts with the pressure balance in the house. A new, higher-efficiency furnace with a larger blower might pull more air through the return ducts, potentially creating more depressurization in the basement. If the old furnace was drawing combustion air from inside and the new one uses outside air (sealed combustion), that change could theoretically go either way. Ductwork changes, new return air locations, or different airflow patterns can all shift the pressure dynamics. It's worth having someone look at the overall picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "My radon has been higher since we added a bathroom exhaust fan. Is there a connection?", "answer": "Possibly. Exhaust fans pull air out of the home, which creates a slight negative pressure that the house compensates for by drawing air in from wherever it can - including from the soil through foundation cracks. One bathroom exhaust fan is usually a small effect, but if you've added multiple exhaust fans or if the house is already well-sealed, even a small addition to the exhaust load can tip the balance. If the exhaust fan is in the basement bathroom, the effect would be more direct.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "Does an ERV (energy recovery ventilator) reduce radon?", "answer": "An ERV can help dilute radon by bringing in controlled amounts of fresh outdoor air, but it's not designed or certified as radon mitigation equipment. The effectiveness depends on the volume of fresh air it introduces relative to the size of the space and the radon entry rate. Some homes see meaningful reductions with an ERV; others don't see enough change to matter. An ERV is good for indoor air quality broadly, but if your radon is above 4 pCi/L, it shouldn't be your primary response - a sub-slab depressurization system is the right tool for that.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "Does an HRV (heat recovery ventilator) reduce radon?", "answer": "Same answer as an ERV - an HRV introduces controlled fresh air exchange, which can dilute radon somewhat. If your levels are modestly elevated and you install a properly-sized HRV with good distribution, you might see a meaningful drop. But like an ERV, it's not a promised fix and it's not the approach professionals use when radon needs to be reliably controlled. It's a ventilation tool, not a radon mitigation tool. For levels above 4, a sub-slab system is the standard.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-seasonal-weather-environmental-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "Can a dehumidifier affect my radon reading?", "answer": "A dehumidifier doesn't directly capture or reduce radon gas. If it's in the basement and pulling significant airflow, it could slightly affect the pressure balance in the space, but the effect is typically minor. Some people notice small changes in radon readings after adding a dehumidifier, but it's not a reliable pattern and the dehumidifier is not something to count on for radon reduction. It does affect moisture, which can affect some entry points (cracks that let in both water and radon), so indirectly there's some relationship, but it's not a mitigation strategy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "My radon went up when I closed the fireplace damper. Is there a connection?", "answer": "Yes, very directly. An open fireplace damper allows air to move up the chimney and out of the house, which creates a pressure gradient pulling air in from lower levels - including from soil gaps in the basement. When the damper is open, you're venting air and somewhat diluting basement radon. When you close it, you eliminate that air draw, and the basement becomes more sealed. Closing the damper at the end of the burning season is a common trigger for a small radon increase.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "My dryer vents into the basement and my radon is high. Is there a connection?", "answer": "If the dryer is actually venting exhaust into the basement rather than outside, that's both a code violation and a potential factor in radon. A dryer venting inside exhausts warm moist air into the basement space - but more relevant to radon, it's a significant source of air exhausted from the home's air supply. The house compensates by drawing in air from other sources, potentially including soil gaps. Beyond radon, a dryer venting inside creates serious moisture and lint fire hazards. That needs to be corrected regardless of the radon situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "Can a wood-burning stove in the basement affect radon?", "answer": "Yes. A wood stove draws combustion air from the surrounding room, creating a low-pressure zone that can pull soil gas in from the foundation. When the stove is burning actively, it can significantly depressurize the basement. This is similar to the old open-combustion furnace effect. If you're burning the stove frequently and have high radon readings, there's a reasonable connection. A stove with a dedicated outside air intake can reduce this effect.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "My basement is very tight and well-insulated. Is that why my radon is high?", "answer": "It's very likely a contributing factor. A tight, well-insulated basement has less random air exchange with the outdoors, which means radon that enters through the foundation has nowhere to go. It builds up rather than diluting. Paradoxically, improvements made for energy efficiency - better insulation, sealed penetrations, weather-stripped doors - can increase radon concentrations because they reduce the accidental ventilation that was previously keeping levels lower. The solution isn't to un-tighten the house; it's to add active radon mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "I added more insulation to my house this fall and now my radon went up. Are those related?", "answer": "Very likely. Adding insulation, especially spray foam or dense-pack insulation that seals gaps, reduces unintentional air exchange. The same gaps that were letting cold air in were also providing some dilution of indoor radon. When you seal the house more effectively, you may see radon concentrations rise because the dilution pathway is gone. It's not that the insulation itself generates radon - it's that a tighter house concentrates what's already entering. If the new levels are above 4 pCi/L, it's time to look at mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "Does attic insulation affect basement radon?", "answer": "Attic insulation doesn't directly affect basement radon, but air sealing done at the same time often does. If your attic project included sealing penetrations, hatches, and top plates, you've reduced the air leakage pathways in the upper part of the house. That can actually increase the stack effect pressure in the lower levels because the air trying to escape at the top has fewer routes, creating more suction at the bottom. Attic work that includes significant air sealing can indirectly push basement radon levels up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "My neighbor opened their windows and their radon dropped, but mine is still high even with open windows. Why?", "answer": "If opening windows is significantly diluting your neighbor's radon but not yours, it suggests you have a higher radon entry rate - the soil gas is entering your home fast enough that simple dilution from open windows can't keep up. A home with very high radon entry (from high-uranium soil, fractured rock beneath, or many foundation entry points) can maintain elevated levels even with modest ventilation. In that situation, you'd need to open essentially every window to get meaningful dilution, and that's not practical. Active mitigation is the right answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "Does running a bathroom exhaust fan continuously help with radon?", "answer": "It can contribute to dilution, but it comes with a tradeoff - exhaust fans depressurize the house, which can increase radon entry. If the fan is upstairs, it's pulling air from upper levels and the house compensates by drawing in more air from below, including potentially from the soil. Net effect can be neutral or even counterproductive for radon. It's not a recommended radon reduction strategy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "My radon went up dramatically when I installed a kitchen range hood. Is there a connection?", "answer": "Powerful range hoods can exhaust a lot of air from the home - some remove 400-1000+ cubic feet per minute when running on high. That creates significant depressurization that the house must compensate for by drawing air in somewhere. In a house with radon entry points in the foundation, the range hood running on high is essentially creating suction that pulls more soil gas in. If you noticed the correlation clearly, it's a real effect. It's also a reason to open a window slightly when running a powerful range hood.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "We got a new heat pump and our radon went up. Is there a connection?", "answer": "Heat pumps don't directly generate radon, but changes to the HVAC system can shift pressure dynamics. If the heat pump replaced a combustion furnace that was drawing inside air for combustion, and the new heat pump doesn't have that combustion air draw, the pressure dynamics change - sometimes toward better, sometimes worse, depending on the specific installation. Ductwork changes associated with a new system can also affect how air distributes through the home. It's worth tracking whether the elevation persists.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "Does a positive-pressure HVAC system help with radon?", "answer": "A system that slightly pressurizes the living space - pushing air in rather than exhausting it - can reduce radon entry because you're working against the stack effect rather than with it. Some HVAC systems are designed to create a small positive pressure in the living area. This can help with radon, but it's not a certified mitigation approach and the effect depends heavily on how tight the building envelope is and where the pressure relief occurs. It's not a substitute for sub-slab depressurization when levels are meaningfully elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC and Forced Air Systems", "question": "My HVAC contractor said my furnace is \"negative pressure\" and could be affecting my radon. Is that real?", "answer": "Yes, that's real. Older combustion appliances - furnaces, water heaters, boilers with atmospheric or natural-draft venting - draw combustion air from the surrounding space. In a basement, that air comes largely from the space around the appliance, which creates negative pressure that the building compensates for by drawing in outside air and soil gas. Contractors who specialize in building science use the term \"combustion appliance zone\" (CAZ) depressurization to describe this. It can be a significant radon driver in homes with older equipment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "What are \"closed-building conditions\" for a radon test?", "answer": "Closed-building conditions means all windows and exterior doors are kept closed (except for normal entry and exit), and all attic fans and whole-house fans are turned off, for at least 12 hours before the test begins and throughout the test period. Interior doors, including basement doors, can be left as you normally use them - this isn't about sealing off the interior. The goal is to create conditions that represent how the house actually operates during normal occupancy, not conditions that artificially dilute or concentrate radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "Can I run the air conditioner during a radon test?", "answer": "Yes. Running a central air conditioner is acceptable during a radon test. It recirculates indoor air rather than bringing in large amounts of outdoor air, so it doesn't violate closed-building conditions. Window AC units that draw outside air could be a concern, but central systems are generally fine. You can also run ceiling fans - they just move air around inside the house and don't affect the test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "Can I run a ceiling fan during a radon test?", "answer": "Yes, ceiling fans are fine during a radon test. They circulate air within the space but don't bring in outdoor air or change the overall pressure balance of the house. Using a ceiling fan during a test doesn't violate closed-building conditions and won't meaningfully affect your results.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "I opened a window during my test. Does the whole test need to be redone?", "answer": "It depends on how long the window was open and at what point in the test it happened. If it was opened briefly for a few minutes (someone came and went through a door, for example), that's unlikely to invalidate the test. If a window was open for an extended period - especially in the first 12 hours of the test when closed-building conditions should be established - the test should be redone. The lab running your test should be informed of the circumstances so they can advise on whether the result is usable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "Do I need to keep the basement door closed during a radon test?", "answer": "No - interior doors are operated normally during a radon test. Closed-building conditions apply to exterior doors and windows, not interior doors. The point is to prevent outdoor air from flooding in and artificially diluting the radon. Interior airflow between rooms doesn't affect the test results in a way that matters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "Does having a fireplace fire during the test affect the results?", "answer": "It can. An active fireplace draws combustion air from inside the house and sends it up the chimney, which depressurizes the home and can pull more radon in from the soil. If you burned a fire for several hours during the test, your results might be slightly elevated compared to your normal baseline. It's worth noting on your test documentation. If you burn fires regularly, the elevated reading might actually represent your real-world conditions better than a test done without any fires.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "My realtor said I need to keep everything closed for 48 hours before the test. Is that right?", "answer": "The EPA protocol is 12 hours of closed-building conditions before the test starts and throughout the test duration. Many real estate tests are 48-hour short-term tests, so in practice the house needs to be closed from 12 hours before placement through the entire 48-hour test - that's about 60 hours total. Some professionals recommend closing up as early as possible to be safe. Your realtor's general advice to keep everything closed is right directionally, even if 48 hours before the test is more conservative than required.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "I placed my radon test in the basement but then had a contractor in for two days who kept the door open. Is the test ruined?", "answer": "If the exterior door was propped open for significant portions of those two days, yes, the test is likely invalid - that's exactly the condition that violates closed-building protocol. Outdoor air flooding in for extended periods would dilute radon and produce an artificially low reading. The test should be repeated under proper conditions. A short-term test is inexpensive and the peace of mind of a valid result is worth it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "Does cooking affect a radon test in the basement?", "answer": "Normal cooking with a range and oven shouldn't meaningfully affect a basement radon test. If you're using a powerful range hood that exhausts 400+ CFM to the outside, that could create enough depressurization to draw in more radon and spike readings temporarily. For a test in the basement, the kitchen range hood effect is somewhat attenuated by distance. Normal residential cooking without an industrial-scale exhaust hood is not a significant test-influencing factor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "Can I do a radon test in winter if I have to go in and out of the house a lot for work?", "answer": "Normal entry and exit - opening and closing exterior doors as you come and go - is expected and acceptable during a radon test. \"Closed-building conditions\" doesn't mean the house is hermetically sealed with no one going in or out. It means windows and doors aren't left open for extended periods. If you're going in and out through a normal door for work, that's fine. The test accounts for normal occupancy behavior.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "Should the test be in the basement or the lowest lived-in level?", "answer": "The standard placement is the lowest level of the home that is currently used regularly, or any area below the 4th floor. If you have a finished basement that people spend time in, that's the right spot. If the basement is unfinished and you only use the first floor, the first floor is appropriate. If your concern is a specific room - a bedroom someone sleeps in downstairs - that's a reasonable primary placement. Testing on the lowest occupied level gives you the most relevant exposure data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "My test kit says to place it 20 inches from the floor. Does that height matter?", "answer": "The placement height guidance exists to keep the device away from the floor where radon concentrations can vary slightly due to radon being slightly denser than air. At floor level, you might get slightly elevated readings. Standard guidance is to keep it above 20 inches from the floor and below 7 feet from the ceiling, away from drafts, exterior walls, and high-traffic areas. Following placement guidelines keeps your result in line with what EPA protocol expects.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "I tested in my finished basement bedroom where my teenager sleeps. Was that the right place?", "answer": "That's actually the most relevant place you can test. If someone is sleeping in that room regularly, their exposure is directly tied to what the radon level is there. Testing in the room where the most vulnerable or most time-exposed person spends their time gives you the most actionable information. You made a good choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "Does leaving the garage door open affect a radon test in the basement?", "answer": "If the garage is attached and the garage door opens into or shares air with the basement or living area, then yes, a propped garage door is effectively an opening to the outside and would violate closed-building conditions. Many garages have a direct connection to the basement through the floor or through a shared wall. If your garage is attached, keep the garage door closed during the test - treat it like an exterior door.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "My test was sent to the lab but I realize I left a window cracked for the whole first night. Can I still use the result?", "answer": "If the window was cracked for the entire first 12-hour pre-test period and into the test itself, the result may be artificially low and not representative of true conditions. Most labs allow you to note testing condition anomalies, and a good lab will flag results where noted conditions are out of protocol. My honest advice: repeat the test. A proper result is worth the cost of the test, especially if you're trying to make a decision about mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Testing Conditions and Protocol", "question": "Can weather during a radon test affect the result?", "answer": "Yes, weather can affect short-term test results. A test that coincides with a multi-day storm front with falling barometric pressure may produce higher-than-typical results. A week of high-pressure fair weather may produce lower-than-typical results. This is why short-term tests are considered screening tools, and a long-term test (90 days or more) gives a more stable average. If your short-term test caught an unusual weather period, a follow-up test or long-term monitor would give more context.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Home Sealing, Insulation, and Tightness", "question": "My house was just weatherized by an energy efficiency program and now my radon is higher. Is that why?", "answer": "Almost certainly. Weatherization programs seal air leaks - attic bypasses, rim joist gaps, window frames, electrical penetrations - that were previously providing unintentional ventilation. That same accidental ventilation was diluting indoor radon. When the leaks are sealed, you get the energy efficiency benefit but you also concentrate whatever pollutants were being diluted. Radon is the most common beneficiary of this effect. Weatherization programs ideally include post-program radon testing for this reason.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Home Sealing, Insulation, and Tightness", "question": "We got a blower door test done and our house is very \"tight.\" Is that a radon risk factor?", "answer": "A tight house doesn't create radon - it concentrates radon that's already entering. If you live on soil with high radon potential and have a tight house, you can end up with meaningfully elevated levels. The EPA recommends radon testing after any significant weatherization or air-sealing work. A tight house that's been properly mitigated can be very comfortable and have very low radon - the two goals don't conflict. You just need both.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Home Sealing, Insulation, and Tightness", "question": "I sealed all the cracks in my basement floor and walls and my radon is still high. Why?", "answer": "Visible crack sealing helps but rarely solves a radon problem on its own. Radon enters through tiny pores in concrete, floor-wall joints, pipe penetrations, sump openings, and gaps that are invisible or difficult to seal completely. Concrete is also somewhat permeable to radon gas at the molecular level. Crack sealing is useful as a supplementary measure but it's not considered primary mitigation. A sub-slab depressurization system works by changing the pressure beneath the slab so radon doesn't have the driving force to enter - it's more robust than trying to seal every possible pathway.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Home Sealing, Insulation, and Tightness", "question": "My house has a crawlspace and the radon is very high. Does the crawl contribute to this?", "answer": "Very much so. Crawlspaces are often a primary radon entry pathway. If the crawlspace has exposed soil or inadequate vapor barrier, it's essentially an open interface between the living space and the soil. Radon from the soil enters the crawlspace and then migrates up into the living area through floor penetrations, gaps around pipes, and the general permeability of the crawlspace floor assembly. Crawlspace encapsulation with a proper vapor barrier and sub-membrane depressurization is a common and effective mitigation approach for crawlspace homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Home Sealing, Insulation, and Tightness", "question": "Does spray foam insulation help or hurt with radon?", "answer": "Spray foam is an excellent air barrier and can seal many of the gaps that radon uses to enter from the rim joist, foundation wall-to-floor joints, and similar areas. When applied thoughtfully, it can reduce radon entry points. However, spray foam on its own is not mitigation - it may reduce the number of pathways but doesn't address the fundamental pressure dynamic that drives radon in. After spray foam application, radon testing should confirm whether levels changed, and if they're still elevated, a sub-slab system is still the right next step.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Home Sealing, Insulation, and Tightness", "question": "We put a concrete floor over our old dirt basement. Should that reduce radon?", "answer": "A poured concrete floor over a dirt basement does eliminate the exposed-soil surface, which is a significant radon source. Many homeowners see a reduction after this type of project. But concrete is permeable to radon gas, and the floor can still have cracks, penetrations, and joints that allow radon entry. The new floor might reduce levels significantly or modestly, depending on how well it was sealed and how high your soil's radon potential is. Testing after the project is the only way to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Home Sealing, Insulation, and Tightness", "question": "Does carpet in the basement affect radon levels?", "answer": "Carpet over a concrete floor doesn't meaningfully affect radon. Carpet is air-permeable and doesn't form a meaningful barrier to gas. Similarly, vinyl flooring and laminate with seams leave enough gaps that radon passes through. The only flooring that could theoretically help is an airtight membrane specifically installed to block gas - and even then, it's a supplementary measure, not a mitigation solution. Don't count on carpet for radon reduction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Home Sealing, Insulation, and Tightness", "question": "We have a sump pump in the basement. Does that increase radon?", "answer": "A sump pit is often a significant radon entry point. It's an opening in the slab that provides a direct pathway for soil gas to enter the basement. If the sump pit is uncovered, it's particularly problematic. One of the first things a mitigation contractor looks at is the sump - covering it with an airtight lid (with a vapor-sealed pipe through the lid for the pump discharge) is a common component of a mitigation installation. An uncovered sump is one of the most efficient radon entry points in a house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Home Sealing, Insulation, and Tightness", "question": "I covered my sump pit and my radon dropped from 8 to 5. Does it need to go lower?", "answer": "Covering the sump was a good step and the reduction confirms it was a significant entry point. But 5 pCi/L is still above the EPA action level. A sub-slab depressurization system would typically bring that down much further - often below 2 pCi/L. The sump cover alone got you partway there, but for a home with 5 pCi/L, full mitigation is the right next step.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Home Sealing, Insulation, and Tightness", "question": "We have a house with a poured concrete foundation versus a block foundation. Does the type affect radon?", "answer": "Yes. Block foundations (concrete masonry unit or CMU) are more permeable to radon than poured concrete because the blocks have hollow cores and the mortar joints between blocks can be pathways for gas. Poured concrete is generally a tighter barrier, though it's still permeable and can crack. Homes with block foundations often have more radon entry than comparable homes with poured concrete, all else being equal. Mitigation approaches differ slightly - block foundations sometimes need wall suction in addition to sub-slab work.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Home Sealing, Insulation, and Tightness", "question": "My neighbor has the same style house and their radon is 1 pCi/L and mine is 6. How is that possible?", "answer": "Radon levels can vary enormously between adjacent homes because the soil conditions beneath each individual house matter more than neighborhood or zip code. The uranium content of the soil, the presence of fractures in rock beneath the foundation, the condition of the foundation itself (cracks, joints, penetrations), the specific HVAC configuration, and even the age and tightness of construction all vary from house to house. Two identical-looking houses side by side can have dramatically different radon levels. Your neighbor's low number doesn't tell you much about your situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Home Sealing, Insulation, and Tightness", "question": "Does having a basement versus a slab house affect radon likelihood?", "answer": "Both can have elevated radon, but the dynamics differ. Basement homes have a large underground space where radon can accumulate before it reaches the living area. Slab homes have the living area directly above the soil, so there's no buffer - radon from the soil enters directly through the slab. Both are common radon situations and both are mitigatable. The presence of a basement doesn't automatically mean higher radon, and a slab doesn't mean lower - it depends on the soil beneath.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Fan, Exhaust, and Ventilation Effects", "question": "My radon spiked after I ran my bathroom fan for a long time. Why would that make radon go up?", "answer": "Exhaust fans remove air from the home, creating negative pressure that must be replaced from somewhere. In a tight house, the makeup air gets pulled in from whatever gaps exist - and in a basement, that includes gaps in the foundation that also carry radon. This effect is most noticeable with powerful fans in tight houses. Running multiple exhaust fans simultaneously can depressurize a basement enough to meaningfully increase radon entry. It's one of the counterintuitive aspects of radon behavior.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Fan, Exhaust, and Ventilation Effects", "question": "Does an attic fan affect basement radon?", "answer": "Yes, and significantly. Attic fans are designed to exhaust large volumes of air from the attic to keep it cool, but they can also depressurize the entire house if the attic isn't well-sealed from the living space. That whole-house depressurization creates the same effect as any exhaust: makeup air gets drawn in from the bottom - including from the soil through foundation gaps. Attic fans have been documented as radon-increasing factors in homes with pathways from the attic to the living space. If your attic has bypasses (gaps around light fixtures, top plates, etc.) an attic fan can be a significant radon driver.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Fan, Exhaust, and Ventilation Effects", "question": "Does a crawlspace ventilation fan help with radon?", "answer": "Crawlspace venting fans can help by reducing the radon concentration in the crawlspace, which then reduces the gradient driving radon into the living area above. It's not a certified mitigation approach for the living space itself, but it can help in specific crawlspace configurations. A sub-membrane depressurization system (a pipe and fan pulling air from beneath the crawlspace vapor barrier) is the more reliable approach when crawlspace radon is the primary entry pathway. Ventilation alone may not be sufficient if the crawlspace radon source is strong.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Fan, Exhaust, and Ventilation Effects", "question": "My radon went down when I started running the ceiling fan in the basement all the time. Is that real?", "answer": "It might reflect real mixing - some monitors placed in dead-air zones of a basement can show locally elevated readings, and running a ceiling fan mixes the air so the monitor reads a more representative room-average concentration rather than the localized high near the floor or in a corner. It could also be slightly diluting the space by keeping air moving. But it's not a meaningful radon reduction strategy. If the fan broke or was turned off, the reading would likely go back up. It's worth verifying the monitor location rather than relying on the fan.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Fan, Exhaust, and Ventilation Effects", "question": "I added a fresh air intake to my furnace and my radon went down. Is that because of the fresh air?", "answer": "Yes, that's a plausible and documented effect. Adding a fresh air intake to a furnace that previously drew combustion air from inside the basement reduces the depressurization effect of the appliance. You're eliminating one source of negative pressure in the basement, which reduces the driving force pulling radon in. Some homeowners see meaningful radon reductions from this change. It's not mitigation, but it's a real improvement in the pressure balance of the house.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Fan, Exhaust, and Ventilation Effects", "question": "Does running multiple kitchen and bathroom fans at the same time spike radon?", "answer": "In a tight, well-sealed house, yes - running multiple exhaust fans simultaneously can create enough depressurization to noticeably increase radon entry. The effect is proportional to how much air you're exhausting and how tight the house is. In a looser older home with lots of air infiltration, the effect might be minimal because makeup air enters from many places easily. In a tightly sealed modern home, exhausting 200-400+ CFM from multiple fans can measurably pull more radon in from the soil.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Soil, Geology, and Site-Specific Factors", "question": "My house is on a hill and my neighbor's is on flat ground. Does that affect radon?", "answer": "Topography can affect radon in subtle ways. Homes on slopes can have soil conditions that channel water and gases differently. Hillside homes sometimes have more exposed rock faces or fractured geology nearby. Even so, radon is primarily determined by the uranium content of the soil and rock beneath the specific footprint of your foundation, not the broader landscape. A hillside location is worth noting but it's not a reliable predictor - only testing tells you what's actually coming into your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Soil, Geology, and Site-Specific Factors", "question": "We live near a uranium mine (or old mining area). Is our radon definitely high?", "answer": "Living near former uranium mining or processing areas does increase the probability of elevated radon because the geology tends to be uranium-rich and mining activity can have disturbed soil in ways that increase radon release. But \"probably high\" is not \"definitely high\" - the only way to know is to test. If you're in a historically mined area, testing is especially important and the threshold for action should probably be lower than it is for someone in a low-risk geology.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Soil, Geology, and Site-Specific Factors", "question": "Does the type of soil under my house matter for radon?", "answer": "Yes. Sandy, gravelly soils tend to have high permeability - radon produced in the soil can migrate easily through pores and reach your foundation. Clay soils are less permeable but can still produce radon; they tend to channel it differently. Fractured bedrock can be a very efficient radon transport medium, sometimes bringing in gas from well below the surface. The uranium content of the parent material is the ultimate determinant of how much radon is produced, but soil permeability affects how efficiently it reaches your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Soil, Geology, and Site-Specific Factors", "question": "I live in an area marked as \"Zone 2\" for radon. Does that mean I have radon?", "answer": "EPA Zone designations (Zone 1 = highest potential, Zone 2 = moderate, Zone 3 = lowest) are based on county-level geology, housing stock, and testing data averages. Zone 2 means the county average suggests moderate potential, not that your individual house is safe. Plenty of homes in Zone 3 have tested above 4 pCi/L, and homes in Zone 1 have tested below 2. The zone is a reason to test, not a substitute for testing. Every home should be tested regardless of zone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Soil, Geology, and Site-Specific Factors", "question": "Does granite bedrock increase my risk of high radon?", "answer": "Yes. Granite is a uranium-bearing rock, and areas with granite geology tend to have higher radon potential. The radon produced in the granite can migrate through fractures in the rock and through the overlying soil to reach your foundation. This is one reason parts of New England, the Upper Midwest, and the Appalachian region have higher-than-average radon levels. But again - knowing your bedrock type is a reason to test, not a warranty of your specific outcome.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-seasonal-weather-environmental-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Soil, Geology, and Site-Specific Factors", "question": "We have a well that goes into bedrock. Does that affect our indoor radon?", "answer": "Water from bedrock wells can contain dissolved radon, which is released when you use the water - showering, washing dishes, running a washing machine. This is called waterborne radon and it contributes to indoor radon levels but usually accounts for a small fraction of total exposure compared to soil-based entry. If you have a bedrock well and very high indoor radon, it's worth testing the water as part of understanding the full picture. Water treatment systems can remove radon from well water if needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Soil, Geology, and Site-Specific Factors", "question": "My radon is highest in the corner of the basement near the sump. Is that a coincidence?", "answer": "Almost certainly not. Sump pits are some of the most direct radon entry points - they're open to the soil beneath and can funnel concentrated soil gas directly into the basement. A monitor placed near the sump will naturally read higher than one placed across the room. This doesn't mean your average room concentration is at that peak level, but it does confirm the sump is a significant entry point. A mitigation contractor will typically incorporate the sump into the solution - either by capping it or routing the sub-slab pipe through it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Soil, Geology, and Site-Specific Factors", "question": "Does radon come from construction materials? My house is fairly new and still has high radon.", "answer": "In the U.S., construction materials (concrete, brick, drywall) are not a significant source of radon - the primary source is the soil beneath the home. Some materials in other countries (particularly certain fly ash products or phosphogypsum) can be meaningful sources, but domestic construction materials contribute very little. Your high radon in a new home is almost certainly coming from the soil, and newer, tighter construction may actually concentrate it more than an older, leakier house would have.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Soil, Geology, and Site-Specific Factors", "question": "Does being on a concrete slab versus having a basement mean lower radon?", "answer": "Not necessarily. Slab homes skip the intermediate accumulation chamber that a basement provides, but radon still enters through the slab directly. A slab home over high-radon soil can absolutely have elevated indoor levels. The mitigating installation for a slab home is slightly different - a sub-slab pipe is drilled through the slab rather than placed in a basement - but the process and effectiveness are comparable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Soil, Geology, and Site-Specific Factors", "question": "Can radon come through my basement walls?", "answer": "Yes. Basement walls - especially block walls - are a real radon entry pathway. Radon in the soil surrounding the foundation permeates through the wall material and through mortar joints. The floor-wall joint (where the basement floor meets the foundation wall) is particularly common entry point because it often has a gap or crack. Wall entry is a less common primary pathway than sub-slab entry in most homes, but it's a real and documented route, especially in block-foundation homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Longer-Term Patterns and Monitoring", "question": "My continuous monitor has been running for a year. What's the most useful way to read a year of data?", "answer": "The most useful thing to look at is your long-term average - what does the typical reading look like over the course of the year, weighted toward the seasons you spend the most time indoors. Also look at the winter peak: what did it reach in January and February when conditions were worst? And look at weather event spikes to understand how responsive your home is to pressure and rain events. The annual average and the winter baseline together give you the clearest picture of your actual exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Longer-Term Patterns and Monitoring", "question": "My monitor shows a 365-day average of 3.2 pCi/L but my winter peaks are 7. Should I act on the average or the peak?", "answer": "Both numbers matter. The EPA uses average concentrations to set action levels - the 4 pCi/L recommendation is based on average exposure. At 3.2 average, you're below the action threshold but in the range the EPA describes as worth considering (2-4 pCi/L carries real but lower risk). The winter peaks of 7 tell you that during the months you're indoors most, the exposure rate is much higher. Many people in that situation choose to mitigate because the peak-season exposure is clearly elevated even if the annual average is technically below the action level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Longer-Term Patterns and Monitoring", "question": "My radon has been creeping up over three years. Is that normal or should I be worried?", "answer": "A slow upward trend over years is worth investigating. It could reflect gradual changes in the foundation - new cracks developing, settling, changes in the slab - or changes in the home's pressure balance from weatherization, new appliances, or HVAC changes. It could also just reflect year-to-year variation in how you're running the house. If you've gone from 1.5 to 3.5 over three years, that's worth taking seriously even though you haven't hit 4 yet. The trajectory matters, not just the current number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Longer-Term Patterns and Monitoring", "question": "How accurate is a long-term average from a consumer radon monitor?", "answer": "Consumer monitors like Airthings, RadonEye, Safety Siren, and similar products vary in accuracy. They're generally useful for tracking trends and understanding your home's behavior over time. For a legally or medically definitive result - a real estate transaction, a decision about remediation - a professional short-term or long-term test using calibrated equipment is the more defensible choice. Consumer monitors are very good at telling you whether your home has a radon pattern worth acting on; they're less reliable as absolute measurements for specific decision thresholds.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Longer-Term Patterns and Monitoring", "question": "I've been tracking radon for two years. In Year 1 my average was 2.8 and Year 2 is 4.1. What changed?", "answer": "Something shifted in your home between years. Common candidates: weatherization or insulation work, furnace replacement, new sump pump or sump pit, foundation settling and new cracks, changes in basement use (finishing the space, adding a bedroom), or changes in occupancy patterns that affected how often doors were opened. A year-over-year jump of that magnitude usually has a cause. Trying to identify what changed between the two years is a good starting point, and at 4.1 the current level is at the EPA action threshold.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Longer-Term Patterns and Monitoring", "question": "My monitor dipped really low for a week and then came back up. What would cause that?", "answer": "A week-long dip could be from a period of open windows or increased ventilation, a stretch of high barometric pressure and settled weather, unusually warm outdoor temperatures that reduced the stack effect, or even the monitor being temporarily placed near an air return. If the dip corresponds to a travel period when the house was opened and then closed, that's a very common pattern - the house vents during your absence and then builds back up when you return and close it up. Context (weather, travel, HVAC changes) usually explains most sustained dips.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Longer-Term Patterns and Monitoring", "question": "Is there any reason radon would suddenly drop permanently without me doing anything?", "answer": "A sudden, permanent drop without any changes to your home or behavior is unusual and worth investigating before assuming the problem solved itself. Possibilities include a monitor malfunction or sensor degradation, the monitor being moved to a different location, changes in the soil or foundation that altered the entry pathway (sometimes a repair elsewhere in the foundation accidentally addresses a radon pathway), or changes in how the home is being operated. A sudden sustained drop is almost as interesting as a sudden spike - it suggests something changed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Longer-Term Patterns and Monitoring", "question": "My radon is 2.7 pCi/L. I know that's below 4, but I have young kids. Should I do anything?", "answer": "The EPA says levels between 2 and 4 pCi/L carry real risk even though they're below the action level, and the risk is worth weighing - the recommendation to act is a guideline, not a hard line. With young children in the home who will accumulate decades of exposure, thinking about mitigation at 2.7 is reasonable and defensible. Mitigation at those levels is typically straightforward and not expensive. It's a judgment call, not a requirement - but it's a legitimate one that many families in your situation make. Call or text if you want to talk through what makes sense for your home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Longer-Term Patterns and Monitoring", "question": "Does radon affect outdoor air? Should I be worried about being in my backyard?", "answer": "Outdoor radon exists - it's produced in the soil everywhere - but it disperses rapidly into the large volume of the outdoor atmosphere and stays at very low levels, typically 0.2 to 0.4 pCi/L on average. You'd have to be in an extremely confined outdoor space with no air movement to accumulate meaningful exposure outside. The health risk from radon is specifically about indoor air in enclosed spaces where it concentrates. Your backyard is not a radon concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Longer-Term Patterns and Monitoring", "question": "My radon monitor was reading low and then I moved it to the other side of the basement and it doubled. Which location is right?", "answer": "Radon can vary within a basement, especially if the entry pathways are concentrated in one area (near the sump, near a specific wall crack, etc.). The location closest to your actual occupancy and breathing zone is the most relevant - if you spend time on one side of the basement, that's where the reading matters. If both locations are lived-in, the higher reading is probably the more conservative and safer number to use for decision-making. Averaging the two might not serve you well - when in doubt, use the higher of the two numbers.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Longer-Term Patterns and Monitoring", "question": "Can pet activity in the basement affect radon readings? My dog sleeps down there.", "answer": "Your dog's presence in the basement doesn't meaningfully affect radon levels. Pets breathe the same air you do, and a concern about a pet in a high-radon space is legitimate - they're accumulating the same exposure. But the dog's being there doesn't change the concentration. If anything, it's a reason to take elevated readings more seriously, since long-term radon exposure affects animals too. The solution is the same: address the radon at the source rather than moving the dog.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Longer-Term Patterns and Monitoring", "question": "My radon has been at exactly 2.0 for months. That seems too stable. Is my monitor stuck?", "answer": "Consumer monitors typically report rounded averages, and a device showing a steady average for weeks isn't necessarily stuck - it may just be stabilized at a consistent baseline with minimal variation in your home conditions. A truly stuck sensor would be suspicious if it's showing 2.0 no matter what you do (open all windows, move it outside, etc.). Try moving the monitor outdoors for a day - outdoor radon should read well below 1 pCi/L, typically 0.2-0.4. If it reads 2.0 outside, the sensor may have drifted. If it reads 0.3 outside and comes back up when you bring it in, it's working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "Does elevation affect indoor radon? We moved from sea level to 5,000 feet.", "answer": "Higher elevation means lower overall air pressure, which means the atmospheric \"lid\" holding radon in the soil is slightly lighter. This can contribute to higher radon potential in elevated areas, combined with the fact that mountain geology tends to be more granite-heavy and uranium-bearing. Colorado, for example, has some of the highest radon levels in the country - a combination of geology and elevation. Your indoor levels still depend primarily on the specific soil beneath your home, but elevation is a relevant factor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "Does living near a river or lake affect radon?", "answer": "River valleys and lakebeds can have specific soil compositions that affect radon. River deposits (alluvial soils) are often sandy and highly permeable, which can either help radon vent from the soil or channel it efficiently. Being near water itself doesn't change radon levels significantly. The soil type and underlying geology beneath your specific property are what matter. Living near a river is not a radon risk factor in itself, though the specific soils in your area might be.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "We're in Florida and I've heard radon isn't a problem there. But my monitor shows 2.4. Is that possible?", "answer": "Yes, it's completely possible. Florida does have some areas with phosphate-bearing soils that have elevated uranium content and corresponding radon potential - particularly central Florida. The idea that Florida has no radon is a misconception. While the average is lower than many Midwestern states, individual homes in Florida can absolutely test above the action level. Your 2.4 reading is real and worth monitoring, especially as you head into seasons when the house is more closed up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "Does the age of my house affect radon?", "answer": "Older houses often have more air infiltration through settling cracks and gaps, which can provide passive ventilation that dilutes radon - sometimes keeping levels lower than a newer, tighter home over the same soil. Newer, well-sealed homes can concentrate radon more effectively. However, older foundations can also have more cracks and deterioration that provide entry points. Age is not a reliable predictor - testing is the only way to know, regardless of when the house was built.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "My parents' 1950s house tests much lower than my 2005 build, even though they're nearby. Why?", "answer": "Your 2005 build is almost certainly tighter - better windows, better insulation, more careful air-sealing - which means less accidental dilution of indoor air. The 1950s house is probably leakier, with more random air exchange that keeps radon from building up. Both houses have the same soil beneath them, but the tighter newer house concentrates radon more effectively. This is the classic energy efficiency versus indoor air quality tension, and it's why newer homes are increasingly required to include radon-resistant construction features in many jurisdictions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "Does living on a concrete slab in a hot climate change how I should think about radon?", "answer": "In a hot climate with an air-conditioned home, the indoor-outdoor temperature difference is typically much smaller than in a cold-climate winter, which means the stack effect driving radon in is weaker. But if the AC keeps the house well-sealed, the dilution from natural ventilation is also reduced. Hot-climate slab homes can still have elevated radon - the soil beneath the slab is the key factor. Don't assume a hot climate means low radon. Test to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "Does the soil being dry versus wet affect radon long-term?", "answer": "Yes, but it's a dynamic effect rather than a permanent state. Wet soil tends to block radon's escape routes and redirect it toward your foundation. Very dry soil can crack and create new entry pathways, but also allows some additional venting. Prolonged drought can sometimes see modest radon reductions (more open pathways for gas to escape), while prolonged wet periods tend to push more radon indoors. The effect over seasons averages out, but you'll see it reflected in your continuous monitor data correlated with rainfall patterns.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "We have a lot of trees around the house. Do they affect radon?", "answer": "Trees themselves don't affect indoor radon, but large trees with extensive root systems can influence soil porosity and water content in ways that might have minor effects on how radon moves through the soil. More practically: homes surrounded by dense vegetation sometimes have trees that affect drainage (keeping soil wetter or drier), which has the downstream effects on radon entry noted elsewhere. It's an indirect, minor factor - not something to plan around, just an interesting variable in the data if you're a monitor-watcher.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "We had a well drilled next to the house and radon went up. Is there a connection?", "answer": "Drilling a well disrupts the soil and rock, which can create pathways for soil gas to move more freely. If the well is close to the foundation, fractures created during drilling could connect to pathways beneath your slab. It's an unusual but documented phenomenon. New construction that involves significant soil disturbance near a foundation can sometimes open up radon entry routes. Testing after any significant ground disturbance near your home is a reasonable precaution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "Does having underground utilities near the house affect radon?", "answer": "Utility trenches (for gas lines, water lines, electrical conduits) cut through the soil and can create pathways for radon to migrate more freely through the backfill. When utilities are installed close to a foundation, the disturbed soil alongside the trench can become a preferential pathway for soil gas. It's not a common concern for most homes, but it's a factor that shows up occasionally in homes with very recent underground utility work near the foundation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "My radon seems higher after heavy yard work near the foundation. Is that in my head?", "answer": "Possibly not. Digging, aerating, or disturbing soil near the foundation can temporarily release trapped radon and also create new pathways through the disturbed soil. The effect is usually temporary - settling and compaction over a few days typically restores the prior pattern. If you consistently notice elevated readings after working near the foundation, it suggests the soil near your foundation has decent radon potential and the physical disturbance is releasing it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "Does a detached garage have radon? I spend a lot of time out there working.", "answer": "A detached garage over a concrete slab or with a floor directly on the ground can absolutely have radon. If you spend significant time in a detached garage - especially in winter when it's closed up - it's worth testing it as a distinct space. Garages are often even less air-tight than a house basement in different ways (gaps under roll-up doors, uninsulated walls) which can work for or against radon concentration. If you're in it regularly, treat it like occupied space and test it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "Does a crawlspace under an addition affect the radon in the rest of the house?", "answer": "Yes. An addition with a crawlspace that shares air with the main house is a significant radon pathway. If the crawlspace under the addition has exposed soil or poor vapor barrier, radon from that space will migrate into the main living area. The floor assembly between the crawlspace and the addition's living space is often less airtight than a basement slab. If you have an addition with a crawlspace and elevated radon, the crawlspace under that addition is a prime suspect.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "We have a radiant floor heating system with tubes in the slab. Does that affect radon?", "answer": "Radiant floor systems with tubing embedded in the slab don't directly affect radon levels. The tubing is sealed within the concrete. However, if the installation required penetrations through the slab or disturbance of the sub-slab aggregate, those locations can become entry points. The slab itself is the barrier, and any penetration through it - regardless of what passes through - can be a radon pathway if not properly sealed. If you had your radiant system installed and noticed radon changes afterward, the penetrations and any concrete disturbance are worth examining.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "Does radon come through the floor drain in my basement?", "answer": "Floor drains that connect to the municipal sewer system or a dry well can be radon pathways. The drain itself is an opening through the slab into the space below, and if the trap seal evaporates (which happens in drains that aren't used regularly), it opens a direct pathway to soil gases. Running water down an infrequently-used floor drain to refresh the trap seal is a simple precaution. If the floor drain is a significant entry point, it can be addressed as part of a mitigation installation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "Does having a finished versus unfinished basement change radon levels?", "answer": "Finishing a basement - adding drywall, flooring, drop ceilings - seals off some of the visible cracks and gaps that might otherwise be radon entry points. However, finishing a basement also typically means the space is used for occupancy, and if the finished materials create a more airtight envelope, radon that does get in has fewer escape routes. A finished basement isn't reliably higher or lower in radon than an unfinished one - the soil is the same regardless - but the occupancy component is what makes the finished basement the critical space to test and potentially mitigate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "My radon is higher near the floor drain and lower in the middle of the basement. Should I seal the drain?", "answer": "Sealing or trapping the floor drain properly is a good idea if it's an entry point. Make sure the trap has water in it - or install a trap primer that keeps it wet. If the drain connects to a dry well below the slab rather than the sewer, capping it more completely might be appropriate. As part of a full mitigation installation, the contractor will address the floor drain as a potential entry point. On its own, sealing the drain may reduce but not eliminate the overall radon problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "Our well water smells like sulfur. Does that mean we have high radon too?", "answer": "Sulfur odor in well water (hydrogen sulfide) and radon in well water often coexist in areas with certain bedrock geology - granite, certain shales, and other uranium-bearing formations can produce both. It's not a promised correlation, but if your well has sulfur odor suggesting specific mineral geology, getting the water tested for radon in addition to indoor air testing is a reasonable precaution. Both issues are treatable; they're just different treatment approaches.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-seasonal-weather-environmental-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Miscellaneous Environmental Factors", "question": "Does having a water softener affect radon readings?", "answer": "A water softener treats water chemistry - hardness minerals - and doesn't have a meaningful direct effect on radon in the water or air. If anything, a softener installed in the basement adds another appliance and possibly additional plumbing penetrations through the slab, which are minor potential entry points if not sealed. The softener itself is not a radon source or reducer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "I've been getting headaches and I read online that high radon can cause that. My radon is at 6. Are the headaches from radon?", "answer": "Radon does not cause headaches, sore throats, fatigue, or any acute symptoms. The health risk from radon is specifically from long-term cumulative exposure to the radiation emitted by radon's decay products - it's a slow, silent process that increases lung cancer risk over many years. If you're having headaches, they have another cause and deserve investigation on their own merits. Even so, 6 pCi/L is above the EPA action level and worth addressing regardless of symptoms - you just shouldn't look for radon as the explanation for how you feel right now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "My son has been coughing a lot and we have high radon. Could the radon be causing the cough?", "answer": "Radon doesn't cause coughing or any respiratory symptoms in the short term. It's a long-term lung cancer risk from cumulative radiation exposure, not something that produces symptoms you'd notice day-to-day. Your son's cough has another explanation - something worth looking into with his doctor. Even so, 6 pCi/L in a home where kids sleep and play is a reason to mitigate, because you're reducing their lifetime cumulative exposure. The two concerns - the cough and the radon - are separate issues that both deserve attention.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "Does radon affect pets? My dog sleeps in the basement where radon is high.", "answer": "Radon exposure accumulates in dogs the same way it does in humans - inhaled radon decay products deposit in lung tissue and deliver radiation over time. Dogs that spend most of their time in high-radon spaces are accumulating meaningful exposure. Studies on dogs used in uranium mines showed elevated lung cancer rates. If your dog sleeps in a basement with radon above 4 pCi/L, mitigating is the right call for the whole household - people and pets included.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "We had our crawlspace encapsulated and the contractor said it would help radon. Did it?", "answer": "Crawlspace encapsulation - sealing the floor with a thick vapor barrier and conditioning or venting the space - can meaningfully reduce radon entry into the living area above, especially when it includes sub-membrane depressurization (a fan pulling air from beneath the barrier). Just installing a vapor barrier without depressurization helps less. Whether it helped in your specific case requires a test - before and after measurements are the only way to confirm what actually changed. If the contractor is claiming radon reduction, the test numbers should support it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "Does running a HEPA air purifier help with radon?", "answer": "No. HEPA filters capture particles - they don't capture radon gas. Radon is a gas that moves freely through any filter. Some of radon's decay products (called \"daughters\") attach to airborne particles, and a HEPA filter can capture those attached particles, which slightly reduces the radiation dose from the particulate-phase decay products. But it doesn't address the radon gas itself. An air purifier is not a radon mitigation strategy and won't meaningfully reduce your radon readings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "Does an activated carbon air filter help with radon?", "answer": "Activated carbon can adsorb radon gas to some degree, and some specialized carbon filter systems have been used for radon reduction in specific applications (like point-of-use water treatment). Standard room air purifiers with activated carbon filters don't move enough air through enough carbon to make a significant dent in a home radon problem. They're not designed or certified for radon mitigation. Sub-slab depressurization is the proven approach for whole-home radon control.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "I've been told to ventilate more but I live in a cold climate. What are my real options?", "answer": "Ventilation is a legitimate radon reduction strategy but it has serious practical limits in cold climates - you can't open windows from November to March. The practical permanent solution in cold climates is sub-slab depressurization, which works by pulling air from beneath the slab and venting it outside, creating a pressure buffer that prevents radon from entering regardless of whether windows are open or closed. This works 24/7, year-round, and doesn't require you to freeze in your house. If you're in a cold climate with elevated radon, mitigation is almost always the right long-term answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "My radon varies between 1.8 and 5.0 depending on the week. What should I do with that information?", "answer": "At a low of 1.8 you're in the lower-risk range; at 5.0 you're above the EPA action level. The variability is telling you that the conditions in your home cycle in and out of concerning territory. The question is what your long-term average looks like and what your winter occupancy-period average looks like. If you're spending several months per year above 4 pCi/L, that's a meaningful exposure, even if summer brings it below 2. I'd look at the annual average and the winter-period average together before deciding what to do. Call us and we can talk through what the data means for your specific situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "Does radon from the soil vary by time of year in terms of how much is produced?", "answer": "The production of radon in the soil is actually fairly constant - it's driven by the continuous radioactive decay of radium in the soil and rock, which doesn't change with the season. What changes seasonally is how easily radon migrates from the soil to your home (soil moisture, freeze-thaw effects on permeability) and how much it concentrates once inside (house sealing, stack effect, ventilation). The radon source itself is constant; the delivery and concentration mechanisms are what vary.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "I tested with a charcoal canister in winter and got 8 pCi/L. My friend tested in summer and got 2 pCi/L. Should she test in winter too?", "answer": "Yes, if she wants a complete picture. A summer test in an open house is a screening tool at best - it tells you about summer conditions, not the full year. In a northern climate, the winter reading is often 2-3 times higher than the summer reading. Your 8 and her 2 might both be from similar homes with similar soil - just tested under very different conditions. For a real estate transaction or a genuine health decision, a winter closed-building test gives the most conservative and most representative result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "After a mitigation system was installed, why does my radon still go up a bit when it rains?", "answer": "A properly installed mitigation system significantly dampens the weather-driven spikes but may not eliminate them entirely. The system creates a pressure buffer beneath the slab that intercepts most soil gas, but an extreme weather event with a very large pressure drop can still push some radon past the system's compensation. Post-mitigation readings might go from, say, 0.5 to 1.5 during a major storm instead of 3 to 8. The spikes are smaller and stay well below the action level. Some residual weather sensitivity is normal even in a well-mitigated home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "My neighbor installed a mitigation system and now their radon is 0.4 pCi/L. What should I expect for mine?", "answer": "Results vary based on the original radon level, the specific entry pathways, the system design, and the soil conditions - but sub-slab depressurization routinely reduces radon levels by 80-99%. A starting level of 8 pCi/L might end up at 0.5-1.5 after mitigation. Your specific result depends on what we find when we assess your home. The goal is getting you below 2 pCi/L if possible - most systems achieve that. I can't promise a specific number until we know more about your home, but I can tell you that the technology is well-proven and effective.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "Is it true that mitigation systems work better in winter? My contractor seemed to say something like that.", "answer": "Mitigation systems work consistently year-round - they're not seasonal. What your contractor may have meant is that the pre-mitigation levels are highest in winter, so the absolute reduction seen in winter looks larger. The system's physics (pressure differential beneath the slab) don't change meaningfully with season. After installation, you should see reduced levels in all seasons, with the largest absolute reduction visible in the winter months when levels were highest to begin with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "Does the mitigation fan ever need to be adjusted for different seasons?", "answer": "Standard passive-style mitigation systems with a single fan run continuously and don't need seasonal adjustment. The system creates a constant low-pressure zone beneath the slab that works against radon entry year-round. Some installations in homes with very variable conditions might benefit from a fan with adjustable suction, but this is uncommon. The year-round continuous operation is a feature - you don't have to remember to change settings as seasons change.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "My radon system has been running for two years. My winter levels are still slightly higher than summer - is something wrong?", "answer": "No. A fully functional mitigation system typically reduces radon levels dramatically and consistently, but some seasonal variation often persists. The underlying pressure dynamics still exist - winter conditions still push slightly more radon toward the home - but the system intercepts the vast majority of it. If your post-mitigation readings are, say, 0.8 in summer and 1.4 in winter, that's a normal pattern. If winter is 4+ even post-mitigation, that would warrant a follow-up visit to check the system performance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "My contractor says I should keep records of my radon readings year over year. Why?", "answer": "Keeping a log of your radon readings over time gives you and your contractor visibility into trends - whether levels are stable, rising, or changing with system performance. Mitigation fans don't last forever (typical lifespan is many years, but they do eventually wear out), and a rising trend in readings can be the first sign that the fan is weakening or that a new foundation pathway has developed. Annual or semi-annual checks of your readings against your historical baseline are the best early warning system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "I took a short-term test in December and got 4.3. Should I take another one in July before deciding anything?", "answer": "You don't need a summer test to validate a December result - you already have the information that matters. 4.3 pCi/L in December is at the EPA action level during the time of year you're home the most. A July test would likely show a lower number, but that lower number doesn't mean the December exposure isn't real. Waiting for a lower summer number before acting is a bit like checking your blood pressure on a calm vacation day after a high reading at the doctor - the high reading still happened. You have enough information to act.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "My neighbor thinks radon is \"overblown\" and says they never worry about it. What should I think?", "answer": "Radon is the second leading cause of lung cancer in the United States after smoking - that's not a guess, it's from EPA and CDC data based on epidemiological studies. The fact that it doesn't cause immediate symptoms makes it easy to dismiss, but the risk accumulates silently over years. Whether to act on a given level is a personal decision, but dismissing radon entirely because it's invisible and symptom-free is the same logic that would make you ignore smoking in a house because it \"hasn't caused problems yet.\" Your neighbor's comfort level doesn't determine your risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "How do I explain to my spouse why our radon keeps going up in winter even though we haven't done anything differently?", "answer": "The simplest explanation: your house acts like a chimney in winter. Warm air rises and escapes from upper floors, and the house pulls replacement air from below - including from the soil through cracks in the foundation. Cold outside temperatures make this chimney effect stronger, and sealed windows remove the dilution you get in summer. It's not a sign anything is wrong or that something broke - it's just how buildings behave in cold weather. Radon follows that pressure gradient right up through your foundation. The good news is that once you understand the mechanism, the fix is straightforward.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Radon and Health Context in Environmental Situations", "question": "What's the one thing I should do if I'm worried about seasonal radon variation?", "answer": "Get a continuous monitor so you can see your actual pattern across all seasons. One short-term test is a snapshot; a continuous monitor over 12 months shows you the full picture - when it's highest, how high it goes, what weather events do to it. If you're already seeing elevated numbers and want to act, call or text us and we'll talk through what your home looks like and what mitigation can do for your situation. Don't let seasonal variation become an excuse to keep watching without acting.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Seasonal Scenarios and Reader Questions", "question": "My radon has been slowly rising since fall - started at 2 in September and is now 4.8 in December. Is this just the season?", "answer": "That trajectory is textbook seasonal behavior - as the house closes up, the temperature differential grows, and the soil starts to freeze, radon accumulates faster than it did in September. The difference is that your December number is now at or above the EPA action level. The seasonal explanation doesn't make the current exposure less real. You're in the range where mitigation is appropriate, and given the trajectory, January and February will likely push it higher. This is a good time to act rather than wait and see.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Seasonal Scenarios and Reader Questions", "question": "My radon was 1.8 all last winter and now it's hitting 3.5 this winter. Nothing changed. What happened?", "answer": "Year-to-year variation of that magnitude is possible from weather patterns alone - a colder, dryer winter with more sustained freeze and less precipitation can shift baseline readings meaningfully. Subtle changes in foundation settling, HVAC behavior, or even how often you run the fireplace can also contribute. At 3.5, you're in the range the EPA describes as worth considering mitigation. The upward trend between winters is worth watching, especially if next winter continues in the same direction.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Seasonal Scenarios and Reader Questions", "question": "My house is in a northern Wisconsin lake community. We only go there summers. Should I worry about radon?", "answer": "If you're only using it in summer and have open windows and doors most of the time, your personal exposure at that property is likely low. But it's worth knowing the actual numbers, especially if other family members stay there or you plan to winterize the cabin and use it year-round. Testing is inexpensive and gives you real information rather than an assumption. If you ever rent it out or sell it, the radon history matters too.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Seasonal Scenarios and Reader Questions", "question": "I tested my seasonal cabin in fall before closing it up for winter and got 6.8 pCi/L. Is that concerning for just 3 months of use?", "answer": "Three months of occupancy at 6.8 pCi/L is still meaningful exposure. It's not the same as living there year-round, but if you spend a solid chunk of time at the cabin every fall, the cumulative dose adds up over the years. Also, the 6.8 in fall might actually be lower than what the cabin accumulates by February. If you intend to keep using it, mitigation is worth considering - it's not a project reserved for primary residences.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Seasonal Scenarios and Reader Questions", "question": "My radon doubled from October to January. Is that a normal amount to double?", "answer": "Doubling from fall to peak winter is on the higher end but not unusual. Many homes in cold climates see a 50-100% increase from early fall to mid-winter peak. Where you start determines whether doubling is a problem: 1.5 to 3 isn't alarming; 2.5 to 5 puts you above the action level. If your October number was already at or above 2, the winter peak likely deserves attention. A continuous monitor lets you see exactly how your home cycles and where the sustained average lands.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Seasonal Scenarios and Reader Questions", "question": "Does radon go up before a cold front moves through?", "answer": "Yes, it can. Cold fronts are preceded by dropping barometric pressure as the low-pressure system approaches, which is the same mechanism that drives pre-storm radon spikes. Cold fronts also often bring wind pattern changes and dramatic temperature swings. If you have a sensitive continuous monitor, you may be able to correlate radon upticks with cold front arrival in your weather app. It's a real and trackable effect.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Seasonal Scenarios and Reader Questions", "question": "My radon spiked for three days after a major ice storm. Is the ice acting like the snow cap?", "answer": "Yes, exactly. An ice storm coats the ground surface with a dense, essentially impermeable layer, which blocks radon's normal venting pathway through the soil. The result is similar to a hard snowpack - radon channels toward your foundation instead of escaping upward. Ice cover is actually a more complete seal than snow because it doesn't have the air pockets that snow does. Three days of elevated readings after an ice storm is a completely expected response.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Seasonal Scenarios and Reader Questions", "question": "My radon drops every time we have a warm spell in the middle of winter. Is that real?", "answer": "Yes. A mid-winter warm spell reduces the temperature differential between inside and outside, which weakens the stack effect that drives radon entry. If it's warm enough to open windows briefly, the dilution effect kicks in too. Even without opening windows, a few days of milder temperatures often show up as a dip on a continuous monitor. It's one of the clearest demonstrations that indoor radon is driven by physical conditions, not just a static property of the soil.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Seasonal Scenarios and Reader Questions", "question": "We had a really mild winter last year and our radon was noticeably lower than usual. Does that track?", "answer": "It does. Mild winters mean smaller indoor-outdoor temperature differences, weaker stack effects, more opportunities to open windows, and soil that may not freeze as deeply or as long. All of those factors tend to produce lower winter radon than a cold, frozen, sealed winter would. If you're tracking year-over-year data, the correlation between winter severity and peak radon readings is one of the clearest patterns you'll find.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Seasonal Scenarios and Reader Questions", "question": "My spring radon reading dropped to 1.2 pCi/L. Can I assume the problem is resolved without doing anything?", "answer": "No. The spring drop is seasonal, not a resolution. The conditions that drove your higher winter readings are still there - the soil still has the same radon potential, the foundation still has the same entry pathways. Next October, when you close the house back up, the cycle will repeat. If your winter peak was above 4, the spring dip to 1.2 doesn't cancel that exposure or prevent next winter from looking the same. The seasonal drop is a predictable part of the pattern, not a fix.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Seasonal Scenarios and Reader Questions", "question": "My radon is 3.2 in winter and I'm trying to decide whether to mitigate. Does the season affect this decision?", "answer": "If 3.2 is your winter reading, your summer number is probably somewhere between 1 and 2. The EPA action level is 4, but the agency also says levels between 2 and 4 carry real risk and mitigation is worth considering. At a winter reading of 3.2 with young children in the home or heavy basement occupancy, many families choose to mitigate. It's a personal risk tolerance decision, but the winter number is the right one to use for that calculation - not the summer number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Storm Events and Acute Spikes", "question": "My Airthings peaked at 22 pCi/L during a tornado warning last night. That seems crazy high.", "answer": "Tornado conditions involve extremely rapid, extreme low-pressure drops - the most severe version of the pressure-driven radon spike mechanism. A reading of 22 during a severe weather event is startling but not impossible for a home with significant radon pathways. The key question is what it reads once the weather normalizes. If it's back to your baseline of 3-4 within 24-48 hours, the storm event is documented and interesting but not defining your chronic exposure. If it stays elevated after the event, that warrants attention.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Storm Events and Acute Spikes", "question": "Is there anything I should do to protect my family during a storm that spikes radon?", "answer": "For a short-duration storm spike, the practical answer is simple: open a window or two if it's safe to do so and let the space ventilate. The spike is transient and typically resolves within hours to a day as pressure normalizes. You don't need to evacuate or take dramatic action. The real response to a home that repeatedly spikes high during storms is mitigation - the system creates a pressure buffer that dampens these events significantly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Storm Events and Acute Spikes", "question": "After a major storm system passed, my radon took almost a week to return to normal. Is that long?", "answer": "It depends on what \"normal\" means for your home. If the soil remained saturated for a week after the storm - which can happen with a large amount of rainfall - then the normal vent pathways for radon through the soil stay blocked for that whole period, keeping entry rates elevated. Some geographic areas with clay-heavy soil can see this effect last 7-10 days after major rain events. If it consistently takes a week or more to return to baseline after storms, it suggests your soil is slow-draining and weather-driven entries are a significant portion of your total radon load.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Storm Events and Acute Spikes", "question": "We had a 3-inch rain in 24 hours and my monitor went from 2.5 to 9. Is my foundation leaking?", "answer": "A spike of that magnitude after heavy rain doesn't necessarily mean your foundation is leaking in the sense of letting water in - it means radon-laden soil gas is entering through existing pathways that became more pressurized when the ground saturated. You might also have water infiltration that's opening or enlarging those pathways. It's worth checking the basement for moisture intrusion after heavy rain events. Both water and radon follow the same basic pathways - if water is getting in anywhere, radon is certainly getting in there too.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Storm Events and Acute Spikes", "question": "My radon spiked to 12 and I found that my sump pump had failed during the storm. Is there a connection?", "answer": "Very likely. A failed sump pump means the sump pit filled with water (or overflowed) and potentially flooded part of the basement. A flooded sump can displace large amounts of soil gas that then have nowhere to go except through the foundation into the basement. At the same time, the backed-up water and any new cracks that formed under the pressure are additional pathways. A sump failure event combined with a radon spike is a strong signal that the sump is a major radon entry point - something to address both in the pump and in the radon mitigation plan.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Storm Events and Acute Spikes", "question": "Does lightning or thunder itself affect radon?", "answer": "Lightning and thunder don't directly affect radon levels. What correlates with thunderstorms is the atmospheric pressure drop that precedes them and the rainfall that saturates the soil - both of which drive radon up. If you're noticing spikes during thunderstorm season, it's the meteorological conditions (pressure, rain) driving them, not the electrical activity or sound. The radon can't \"feel\" lightning; it responds to pressure and moisture changes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Storm Events and Acute Spikes", "question": "We're in a hurricane zone. Are radon issues worse here or is it not really a concern?", "answer": "Hurricane tracks and moderate tropical storm activity bring extreme pressure drops, torrential rain, and flooding - all of which would cause significant radon spikes during events. In southern states with generally warm climates and lighter radon geology, radon tends to be less prevalent, but it's not absent. Homes in hurricane zones in Georgia, the Carolinas, or inland from the Gulf can have elevated radon. If you're in an area with granite geology (like parts of the Southeast), radon is worth testing regardless of hurricane activity.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC Deep Dives", "question": "My HVAC installer told me to test radon after they put in a new air handler. Why would that matter?", "answer": "A new air handler might have different airflow characteristics than the old one, a different location for the return air plenum, or different ductwork connections. All of these can change how air pressure distributes through the home - which directly affects how much soil gas the house \"suctions\" from below. It's a reasonable precaution and a sign your installer knows something about building science. Testing before and after any major HVAC change is good practice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC Deep Dives", "question": "My radon went from 3.2 to 5.8 after we had a new gas furnace put in with a higher-output blower. Is that the cause?", "answer": "A higher-output blower moves more air through the ductwork system, which can depressurize the return air side more significantly. If the return air ducts are in the basement or pull air from basement-adjacent spaces, a stronger blower means more suction in that zone - and that suction pulls radon in from the soil. It's a plausible and fairly direct cause. A mitigation contractor or HVAC technician who understands building pressurization can look at how the return air is configured relative to the basement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC Deep Dives", "question": "Does zone heating and cooling affect radon differently in different rooms?", "answer": "Zone systems that control airflow to different parts of the house can create uneven pressure distribution. A zone that's frequently closed off might become slightly pressurized or depressurized relative to the rest of the house, depending on how the system is balanced. If a basement zone is frequently closed off while the rest of the system runs, the pressure dynamics in the basement can shift. It's a more nuanced effect than a simple whole-house system, but the principle is the same - pressure differences drive radon entry.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC Deep Dives", "question": "My ductwork runs through the basement slab and I think it might be a radon pathway. Is that a thing?", "answer": "Yes. Ductwork that runs through a concrete slab (common in slab-on-grade construction with in-slab duct systems) can absolutely be a radon pathway. If the ducts aren't perfectly sealed - and they almost never are - radon can enter the duct system through gaps in the slab penetrations and then distribute throughout the house via the air handler. This can result in elevated radon in rooms far from the basement. It's a known issue in certain home types and something mitigation contractors specifically look for.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC Deep Dives", "question": "Can a geothermal heating system affect radon?", "answer": "Geothermal systems involve buried loop fields in the soil, which are sealed loops but do require bore holes or trenches. The excavation for a geothermal installation can disturb soil and rock, potentially opening new pathways for radon migration toward the foundation. Once the system is operating, the sealed loops don't circulate air - just fluid - so there's no direct pathway for soil gas to enter the home through the system. But post-installation testing is worth doing to see if the excavation changed anything.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC Deep Dives", "question": "My house has radiant ceiling heat and I've never had radon issues. Is that because ceiling heat doesn't depressurize the basement?", "answer": "Radiant ceiling heat doesn't use forced air at all - no blower, no ductwork, no pressure changes from the heating system. This means it doesn't contribute to basement depressurization the way forced-air systems can. Homes heated by radiant ceiling, baseboard hot water, or electric resistance elements typically have simpler pressure dynamics from the HVAC side. Radon levels are still determined by the soil and foundation, but the HVAC-driven depressurization factor is absent. It's one less contributing variable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC Deep Dives", "question": "We added a whole-house humidifier to our forced air system. Could that affect radon?", "answer": "A bypass humidifier on a forced-air system moves small volumes of air through the humidifier pad and back into the duct system - the airflow effect on pressure is minor. A steam humidifier adds moisture without significant airflow. Neither type of whole-house humidifier would meaningfully change radon levels. If you noticed a change around the same time as the humidifier installation, look at whether other HVAC work was done at the same time (filter changes, duct work, blower adjustments) that might be the actual cause.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC Deep Dives", "question": "Does a mini-split / ductless system affect radon?", "answer": "Ductless mini-splits condition individual rooms without a central duct system, which means they don't create the duct-driven pressure imbalances that central forced-air systems can. A mini-split in the basement conditions that space without creating significant positive or negative pressure. From a radon standpoint, ductless systems are generally a neutral factor - they don't amplify the stack effect the way a central return in the basement can. Radon in a mini-split home is still entirely determined by the foundation and soil.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC Deep Dives", "question": "My radon is high and my house has a central vacuum with an exhaust that vents inside the basement. Does that matter?", "answer": "A central vacuum that exhausts inside the living space (rather than to the outside) is recirculating air back into the basement, not exhausting it. That doesn't depressurize the house the way a true exhaust fan does. However, central vacuums that exhaust to the outside are a genuine exhaust fan from the home's perspective. If your central vacuum is exhausting to outside, it contributes a small amount of depressurization during operation. During normal daily operation it's a minor factor compared to the HVAC system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC Deep Dives", "question": "Does an energy recovery ventilator (ERV) on a tight new home fully solve the radon problem?", "answer": "An ERV provides controlled fresh air exchange, which dilutes indoor radon. In new construction designed to meet ASHRAE 62.2 ventilation standards with an ERV, radon levels are often meaningfully lower than they would be in the same home without any mechanical ventilation. But ERVs are not radon mitigation systems - they can't warranty a specific radon reduction and their performance depends on airflow rates, distribution, and entry rates. In radon-prone areas, sub-slab depressurization is still the more reliable approach, even in a tight new home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-seasonal-weather-environmental-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "HVAC Deep Dives", "question": "My HRV was set to 10% of capacity to save energy. Could that be making radon worse?", "answer": "Yes. An HRV or ERV running at minimal capacity isn't providing meaningful fresh air exchange, which means the radon dilution benefit is nearly zero. If the system was intended as part of your home's air quality strategy, running it at 10% undermines that design. Many builders and HVAC contractors set these systems to minimum to reduce heating costs, but the tradeoff is reduced indoor air quality - including higher radon concentrations. Proper ventilation rates (following ASHRAE 62.2 guidance for your home's square footage and occupancy) are worth the energy cost.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Home and Lifestyle Scenarios", "question": "We work from home and are in the basement office all day. Does that make the radon risk higher for us?", "answer": "Yes, occupancy hours matter. Radon risk is about cumulative exposure - the longer you breathe elevated radon, the higher your dose. Someone spending 8-10 hours a day in a basement with 5 pCi/L is accumulating exposure much faster than someone who's down there 30 minutes a day. Work-from-home workers in basement offices are in a higher-exposure situation and have a stronger-than-average reason to test and mitigate if levels are elevated.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Home and Lifestyle Scenarios", "question": "My basement bedroom is where my teenager sleeps every night. Radon is 3.8 pCi/L. Should I act?", "answer": "3.8 pCi/L in a sleep space used every night puts your teenager at meaningful cumulative exposure over the years they'll be sleeping there. The EPA action level is 4, but 3.8 is not materially different - and for a regularly occupied bedroom, especially for a young person with decades of exposure ahead of them, most families in that situation choose to mitigate. It's one of those cases where the number is technically just below the threshold but the practical decision is clear.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Home and Lifestyle Scenarios", "question": "We just finished our basement as a playroom for the kids. Radon is 4.2 pCi/L. Do I need to act right now?", "answer": "Yes, I'd treat this as urgent - kids in a playroom are the worst-case occupancy scenario because they're low to the ground (where radon concentrates slightly more), spending significant hours there, and have their whole lives ahead of them to accumulate exposure. 4.2 is above the EPA action level. Get a mitigation system installed; it's the right call for your situation. If you want to talk through what that looks like for your specific home, give us a call.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Home and Lifestyle Scenarios", "question": "I have a gym in my basement and I work out down there every day for an hour. Radon is 5.5 pCi/L. How much does that affect my risk?", "answer": "An hour a day at 5.5 pCi/L is meaningful cumulative exposure, especially over many years. Exercise also increases your breathing rate, which means you're inhaling more radon per minute during a workout than you would be sitting still. It's not a crisis, but it's a real risk factor, and 5.5 is clearly above the action level regardless of how you use the space. Mitigating the basement benefits your health whether you're working out, sleeping, or just passing through.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Home and Lifestyle Scenarios", "question": "We homeschool and our kids are in the basement schoolroom all day, every day. Radon is 3.4 pCi/L. What should I do?", "answer": "The intensity of occupancy changes the calculus significantly. If your kids are spending 6-7 hours a day in that basement, their cumulative exposure at 3.4 pCi/L adds up to something comparable to living in a home with moderately elevated levels. The EPA guidance says 2-4 pCi/L is worth considering mitigation, and your occupancy pattern pushes this firmly into \"act on it\" territory for me. This is one of those cases where the numbers say consider it and the occupancy pattern says do it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Home and Lifestyle Scenarios", "question": "We just moved into a house and the previous owners said they had the radon tested and it was fine. But my monitor is showing 5.1 pCi/L. What happened?", "answer": "The previous owners may have tested in summer with open windows, or tested on the first floor rather than in the basement, or tested under conditions that produced a non-representative result. Or they could be misremembering, or the test may have been years ago before weatherization work was done. Your monitor is showing you current conditions. The prior test's result doesn't override what's in front of you - 5.1 pCi/L is above the action level and worth addressing regardless of what a previous test showed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Home and Lifestyle Scenarios", "question": "I'm pregnant and we just discovered our basement radon is 7 pCi/L. Should I avoid the basement completely?", "answer": "Minimizing your time in the basement while the radon is elevated is a reasonable and prudent step during pregnancy, since you're concerned about your own health and cumulative exposure. Radon doesn't cause birth defects or direct harm to a fetus in the way some toxins do - its primary risk is lung cancer from long-term inhalation. Even so, limiting unnecessary time in a high-radon space is sensible. The longer-term priority is getting the system mitigated so the basement is safe for your whole family, including the baby once they're home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Home and Lifestyle Scenarios", "question": "My elderly mom moved into our basement bedroom and her radon is 4.6 pCi/L. She's 78. Should I be worried?", "answer": "It's a legitimate concern. Your mother's remaining lifetime exposure is shorter than a younger person's, which changes the long-term cumulative risk somewhat. But 4.6 pCi/L is still above the action level, and for someone spending significant time in that bedroom every day, the exposure is real. The mitigation cost versus the exposure reduction is a favorable tradeoff at any age. I'd prioritize getting it addressed rather than reasoning that age reduces the urgency.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Home and Lifestyle Scenarios", "question": "My radon seems to spike when everyone is home and active. Could family activity be causing it?", "answer": "Counterintuitively, more people home often means more door opening and closing, cooking with the range hood running, more HVAC cycling, and more air movement - some of which can actually slightly increase radon entry by affecting pressure balance. But it can also mean more ventilation from people coming in and out. The effect is real but modest - far smaller than weather or seasonal factors. If you're noticing a pattern, a continuous monitor's data can help you correlate activity with readings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Home and Lifestyle Scenarios", "question": "I have a wood pellet stove in the basement and my radon is elevated. Is there a connection?", "answer": "Like a wood stove, a pellet stove draws combustion air from the surrounding space. If the pellet stove doesn't have a dedicated outside air source, it's pulling air from the basement, depressurizing that zone, and increasing the pressure gradient that draws radon in. The effect depends on how much air the stove consumes and how well-sealed the basement is otherwise. If you're running the stove frequently and have elevated radon, it's a contributing factor worth discussing with a mitigation contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Home and Lifestyle Scenarios", "question": "We're building a new addition over a crawlspace. Is there anything we can do during construction to prevent radon issues?", "answer": "Yes - radon-resistant new construction (RRNC) techniques are most cost-effective to incorporate during building rather than retrofitting later. This includes a gas-permeable layer beneath the vapor barrier, a solid vapor barrier over the crawlspace soil, a sealed stub-out pipe for a future fan, and sealant at all penetrations. If the builder is unfamiliar with these techniques, they're straightforward and inexpensive to add during construction. Post-construction testing will tell you whether the passive RRNC is sufficient or if activating the system with a fan is needed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Specific Home and Lifestyle Scenarios", "question": "We're adding a basement to our existing house (excavating and underpinning). Should we plan for radon?", "answer": "Absolutely. Adding a basement creates exactly the conditions where radon becomes relevant - an enclosed underground space adjacent to the soil. Planning for radon during construction is far cheaper than retrofitting after the fact. Incorporating a sub-slab aggregate layer, a vapor-permeable membrane, and a stub-out pipe for a future fan during construction costs a fraction of a retrofit system. Get a post-construction radon test once the basement is finished and decide whether to activate the passive system with a fan.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "My Airthings app shows a 24-hour average, 7-day average, and long-term average. Which one matters most?", "answer": "The long-term average is the most important for understanding your health risk, since radon exposure is cumulative over time. The 7-day average helps you see how you're trending. The 24-hour average is useful for diagnosing what's happening right now - did a storm come through, did you open windows, did something change? For making a decision about mitigation, look at the long-term average and the 7-day average during your highest-exposure season (winter). Don't act on a single 24-hour spike in isolation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "Why does my Airthings show pCi/L but other apps show Bq/m³? Are those the same thing?", "answer": "They measure the same thing - radon concentration - in different units. Bq/m³ (becquerels per cubic meter) is the metric unit; pCi/L (picocuries per liter) is the U.S. unit. The conversion factor is: 1 pCi/L = 37 Bq/m³. The EPA action level of 4 pCi/L is the same as 148 Bq/m³. The WHO recommendation is 100 Bq/m³, which is about 2.7 pCi/L. Neither unit is more accurate than the other - they're just different scales for the same measurement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "My monitor has a \"radon level\" indicator that goes from green to yellow to red. What does each mean?", "answer": "The exact thresholds vary by device, but most consumer monitors follow a pattern close to: green = below 2 pCi/L (lower risk), yellow = 2-4 pCi/L (moderate, worth monitoring), red = above 4 pCi/L (above EPA action level, mitigation recommended). Some devices split this differently. The color coding is a simplified guide - don't treat green as \"no concern\" or red as \"emergency.\" Use the actual number, not just the color, for decision-making.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "My radon jumped from 1.2 to 3.8 in one day. My house looks the same. What could cause that?", "answer": "Single-day spikes of that magnitude are almost always weather-related. Check your local weather app for the same period - was there a barometric pressure drop, incoming storm system, or rain event? Those three factors are the most common drivers of rapid radon spikes. If there was significant weather the day your reading jumped, that explains it. Watch whether it returns to near 1.2 once conditions stabilize. If it stays elevated after the weather clears, there may be a new entry pathway worth investigating.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "My monitor reads \"0.0 pCi/L\" overnight and then rises during the day. That seems backwards from what I've read.", "answer": "A reading of true 0.0 overnight is unusual and might indicate a sensor at the edge of its detection range, a very low-radon environment, or occasionally a sensor calibration issue. In most homes, radon is actually slightly higher overnight and lower midday - the opposite of what you describe. If you're seeing a consistent pattern of 0.0 at night with daytime rises, it's worth noting the monitor model and verifying with a short-term professional test kit to confirm you're seeing real data rather than a sensor artifact.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "I placed my radon monitor right next to the sump pit and it reads 12 pCi/L. Is the whole basement really at 12?", "answer": "Placing a monitor directly adjacent to a radon entry point will give you a locally elevated reading that doesn't represent the average room concentration. It's like putting a carbon monoxide detector directly over a gas burner - you'll see an artificially high reading from the localized source. Move the monitor to the center of the basement, away from the sump, exterior walls, and drafts. The room-average reading is what matters for your health exposure and what EPA protocol recommends for placement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "My monitor reads much higher on days I do laundry. Is there a connection?", "answer": "A standard washing machine and dryer can have a modest effect on home pressure balance, but it shouldn't be dramatic. If you have a clothes dryer that vents outside, running the dryer removes air from the home (creating some depressurization). If you're doing laundry in a basement and opening the basement door to the laundry room repeatedly during the process, the increased activity and door movement could affect readings temporarily. If the correlation is very clear, check whether your dryer is venting properly to the outside.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "My monitor's readings seem to drift upward over weeks and then reset. Is that normal behavior?", "answer": "This pattern - a slow upward drift followed by a drop - sometimes reflects real behavior: a multi-week high-pressure weather pattern with a closed house, followed by a period of ventilation or a weather change. But it can also indicate a sensor drift issue in some consumer monitors. Check whether the resets correspond to weather events or house ventilation changes. If they seem to occur on their own with no corresponding real-world event, a sensor calibration check or comparison against a known-good test is worth doing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "My neighbor has an Airthings and I have a RadonEye and our readings are different in identical houses. Which one is right?", "answer": "Consumer radon monitors have different sensing technologies and accuracy characteristics. Neither is necessarily \"right\" in an absolute sense - both provide estimates with some margin of uncertainty. The most meaningful comparison would be to run both in the same room for a period and see if they track together (similar trends) even if the absolute values differ slightly. For a definitive reading, a professional short-term alpha-track test or electret test gives a calibrated result you can compare against.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "My monitor sometimes shows \"---\" or \"calculating\" instead of a number. Is that a malfunction?", "answer": "Most radon monitors take a period of time (anywhere from 30 minutes to 24 hours depending on the device) to accumulate enough measurements to generate a reliable first reading. Showing \"---\" or \"calculating\" early in operation is normal. Some devices also show this status if they lose power and restart. If the device has been running for more than 24 hours and is still showing \"---\", that's worth investigating - check the manufacturer's guidance for your specific device.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "I tested two rooms in my basement and got different readings. How do I know which to use?", "answer": "Radon can vary between different parts of a basement depending on where the entry points are, how air circulates in the space, and proximity to HVAC returns and supplies. If both rooms are occupied, the higher of the two readings is the more conservative basis for decision-making. For testing protocol, EPA guidance is to test the lowest regularly used level - if you're regularly using both rooms, testing each one gives you the full picture. Report the higher number to whoever is helping you interpret results.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "My short-term test and my continuous monitor disagree significantly. Which should I trust?", "answer": "It depends on the magnitude of the disagreement and when each measurement was taken. Short-term tests and continuous monitors use different sensing technologies, and if the test period coincided with unusual weather, the result might not represent your typical conditions. A long-term test (90+ days) or a multi-month average on a continuous monitor is more reliable than either a short-term test or a brief monitor reading. If both are giving you numbers above 4, act on that regardless of which is \"more right.\"", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "My radon monitor was placed by my HVAC contractor right next to the return air vent. Will that affect my reading?", "answer": "Yes, significantly. Placing a radon monitor directly in front of a return air vent means it's sampling air being pulled from throughout the house (including diluted air from upper floors), which will produce an artificially low reading. The monitor should be placed away from air vents, windows, exterior walls, and high-traffic areas. If your current placement is near a return vent, move it to a more central, still-air location in the basement and give it 24-48 hours to stabilize.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Interpreting Monitor Data and Understanding Readings", "question": "My monitor shows radon is highest between 2am and 6am. Is that real?", "answer": "Yes, this is a commonly observed pattern. During the overnight hours, the house is closed up, activity is minimal (no door openings, no HVAC-driven air mixing from people moving around), and the stack effect runs continuously without the disturbance of daytime activity. Radon accumulates during those quiet hours. Once the household wakes up - the furnace cycles more, doors open, people move through the house - the mixing and minor ventilation events reduce the concentration somewhat. The overnight peak is real and well-documented.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "My state has a radon program. Does that mean my state is especially high-risk?", "answer": "Most states have radon programs - it's not a reliable indicator that your state is especially high-risk. State programs exist because radon is a public health issue nationwide and because states want to encourage testing and mitigation. Iowa and North Dakota have some of the highest average radon levels in the country, but virtually every state has geographic areas with elevated radon. Having a state radon program is a good thing, not an alarm signal in itself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "I saw on a map that my county is listed as \"moderate\" for radon. Does that mean my house is moderate?", "answer": "County-level radon maps reflect averages and geological probability, not your specific house. Plenty of homes in \"moderate\" counties test well above 4 pCi/L, and plenty of homes in \"high\" counties test below 2 pCi/L. The only way to know your house is to test your house. The county zone is a reason to test, not a substitute for it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "Does radon have a smell or taste? My water smells off and I wondered if it could be radon.", "answer": "Radon is colorless, odorless, and tasteless. You cannot detect it by any sense. The smell in your water is likely hydrogen sulfide or other dissolved minerals - a separate issue that's worth testing your water for, but unrelated to radon itself. Water can contain dissolved radon, but you can't smell or taste radon even when it's present. If you're on a well, testing both the air and the water for radon is worthwhile, as they can both contribute to indoor exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "If radon is naturally occurring, why do we have to do anything about it? Isn't it just part of nature?", "answer": "Naturally occurring doesn't mean harmless - arsenic, mercury, and many other natural substances cause serious harm when concentrated. The problem with radon in homes is that modern construction concentrates it in enclosed spaces where people breathe it for decades. In the outdoor environment, radon disperses rapidly to background levels. Inside a sealed basement, it can reach concentrations hundreds of times higher than outside. The \"natural\" argument misses the point: it's the concentration in occupied spaces that creates the risk.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "My house tested high for radon 10 years ago and I never did anything. Should I test again?", "answer": "Yes, definitely. A 10-year-old test result may not reflect current conditions - the house may have had weatherization work, HVAC changes, foundation settling, or a sump pump replacement that changed the radon picture. Current conditions are what matter for current exposure, and if the house tested high 10 years ago and nothing was done, it's likely still high. A fresh test gives you the current baseline and the information to make a decision about mitigation today.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "My old radon test result says \"less than 0.5 pCi/L.\" Is that real or is it the detection limit?", "answer": "Most alpha-track test kits used in professional testing have detection limits around 0.2-0.5 pCi/L. A result reported as \"less than 0.5\" means the reading was at or below the detection limit of the device - the actual radon level may be anywhere from 0 to 0.5. In practice, this is a very low reading that's good news. If your current continuous monitor shows something well above that, the house conditions or testing circumstances differ from that earlier test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "Can I stop worrying about radon once I have a mitigation system installed?", "answer": "A mitigation system is not a set-and-forget solution, though it's close. The fan will run reliably for many years, but you should test post-mitigation to confirm the system achieved its goal (typically below 2 pCi/L). After that, checking the system pressure gauge periodically (many systems have a manometer you can read at a glance), replacing the fan when it eventually wears out, and doing periodic radon tests every few years are the ongoing responsibilities. It's a minimal maintenance item, but it's not zero.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "My radon system has been installed for 5 years. Should I retest?", "answer": "Yes. EPA guidance recommends re-testing 24 hours after a mitigation system is installed (to confirm it's working) and then every 2 years afterward. A lot can change in 5 years - the fan can weaken, new foundation cracks can develop, and HVAC changes can alter the pressure dynamics that the system is working against. A 5-year gap since your last test is a good reason to run a fresh short-term test or check your continuous monitor's long-term trend.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "Does a radon mitigation system affect indoor humidity or air quality in other ways?", "answer": "Sub-slab depressurization systems vent air from beneath the slab to the outside, which can slightly reduce the moisture that enters from the soil - some homeowners notice modest improvements in basement humidity. The system doesn't significantly affect the humidity of the indoor living space beyond that. It also doesn't filter or condition the air. Some homeowners combine mitigation with a dehumidifier for more aggressive moisture control, which is a reasonable pairing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "My radon system smells sometimes when it runs. Is that normal?", "answer": "The system is pulling air from beneath the slab - which can include musty, earthy, or occasionally sulfurous odors from the soil and aggregate. If the fan housing or pipe is near a living area and the system has any leaks in the interior pipe run, those odors can get into the space. Properly installed systems should have sealed interior pipe runs so all the sub-slab air goes directly to the outside. If you're smelling something from the system, checking the pipe connections inside the house is worthwhile.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "What happens if my radon fan breaks? Will I know?", "answer": "Most mitigation systems include a visual indicator - either a small U-tube manometer (a liquid-filled tube) or an indicator light - that shows whether the system has suction. If the fan fails, the indicator will show zero suction. Some homeowners also notice increased radon readings on their continuous monitor. If you don't have a monitor and rely on periodic testing, a failed fan might go undetected for a while. Checking the manometer periodically and testing every 2 years catches this scenario.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "How long do radon mitigation fans last? (Environmental Radon in Context)", "answer": "Most mitigation fans are designed to run continuously and are rated for many years - commonly 5-10 years, with some lasting longer. Fan longevity depends on the specific model, whether it's protected from moisture, and the conditions it operates in. The fan is a consumable part of the system and should be checked periodically. When it eventually needs replacement, it's typically a straightforward swap. Call us if you're not sure whether your existing fan is performing at spec.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "Can I turn my radon fan off at night to save electricity?", "answer": "You can, but I wouldn't recommend it. The fan draws very little power - typically equivalent to a light bulb - and the whole point of the system is to maintain a continuous pressure differential beneath the slab. Turning it off at night means radon accumulates for 8 hours during your highest-occupancy period (sleeping). The energy savings don't justify the exposure risk. Run it continuously.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0236", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "My radon system makes a humming noise that wakes me up. Can I do anything about it?", "answer": "Noise complaints from radon fans are usually related to vibration transmitted through the pipe, the mounting bracket, or the fan housing. Pipe vibration can often be dampened with rubber couplings or flexible connectors between the fan and the rigid pipe. If the fan itself is unusually loud, it may be nearing the end of its useful life or may have developed a bearing issue. A contractor can assess whether repositioning, damping, or replacing the fan resolves the noise.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0237", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "I installed a radon system but my post-test still shows 3.8 pCi/L. Did it not work?", "answer": "3.8 is a significant improvement if you started above 4 (and presumably higher), but it's still close to the action level. Most properly designed systems bring levels below 2 pCi/L. A post-mitigation reading of 3.8 suggests the system might need adjustment - the suction point may not be reaching all the radon entry zones, additional entry points may need to be addressed, or the fan may be undersized. Have the contractor evaluate the system; suction extension or a second pipe point often resolves incomplete mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0238", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "My contractor wants to install two suction points. Is that necessary or is he trying to upsell me?", "answer": "Two suction points (two pipes through the slab) are genuinely needed in some situations - if the slab covers a large area, if there's a structural footer that divides the sub-slab gravel into separate zones, or if the soil communication under the slab is poor (so a single pipe can't depressurize the whole footprint). A good contractor will do a communication test first to determine whether one point is sufficient. If communication under your slab is poor, two points is a legitimate recommendation, not an upsell.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0239", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "Will a radon system affect the resale value of my house?", "answer": "A properly installed, installation recordted radon mitigation system is generally viewed as a positive feature by informed buyers - it shows the problem was identified and professionally addressed. Some buyers and agents unfamiliar with radon might initially react to the system negatively (seeing a pipe on the side of the house), but a simple explanation usually reassures them. In high-radon regions, a mitigated home is often easier to sell than one without a known radon result. The system demonstrates responsible homeownership.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0240", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "My new house already has a passive radon system from the builder. Should I activate it with a fan?", "answer": "The presence of a passive system (pipe and cap, no fan) is builder's good practice that makes activation easy and cheap. Whether you need to activate it depends on your current radon levels. Test first - if the passive system is already keeping levels below 2 pCi/L, you don't need to do anything more. If levels are above 4, or in the 2-4 range and you want to be more conservative, adding a fan to the existing pipe is a quick and inexpensive upgrade. Test first, then decide.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0241", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "If radon fluctuates so much, how does anyone calculate an actual annual average exposure?", "answer": "Long-term tests (alpha-track detectors left in place for 90-365 days) integrate all the fluctuations - storms, seasons, good days and bad days - into a true time-weighted average. That average is what's used for health risk calculations. Continuous monitors also accumulate a running average that becomes more stable over time. A single short-term test gives you a snapshot; a long-term test or sustained continuous monitoring gives you the average that actually determines your cumulative dose.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0242", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "My contractor gave me a post-mitigation reading of 0.8 pCi/L. Is that as low as it gets?", "answer": "0.8 pCi/L is an excellent result. Outdoor background radon is typically 0.2-0.4 pCi/L, so 0.8 is only modestly above the outdoor ambient level - the system is working very well. Some homes with extremely good soil communication under the slab and a well-positioned fan get all the way down to 0.2-0.3 indoors. Whether you can squeeze it lower typically depends on how many entry points remain and how complete the sub-slab coverage is. At 0.8, you're in very good shape.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0243", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Environmental Radon in Context", "question": "I want to understand my risk. If I've lived with 5 pCi/L for 10 years, what does that mean?", "answer": "Radon risk is typically expressed as lung cancer risk per year of exposure at a given concentration. The EPA's estimates suggest that 5 pCi/L over a lifetime of exposure carries a meaningful lifetime lung cancer risk. Ten years at that level is a real but not catastrophic accumulated dose - your overall health, whether you've ever smoked, and other factors affect how that risk plays out. The right response isn't panic - it's mitigating now to stop accumulating further exposure, and discussing your personal health picture with your doctor if you have concerns. Radon doesn't cause immediate symptoms; any health evaluation is about long-term monitoring and awareness.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0244", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "My radon is 4.1 pCi/L. Is that really bad or is it just barely over the line?", "answer": "It's at the EPA action level - the level at which the recommendation is to mitigate. Whether 4.1 is \"really bad\" depends on context: if it's a winter reading in a room where people spend a lot of time, it's a clear signal to act. If it's a borderline summer reading that likely drops to 2 in warm months, the picture is a bit different. Either way, 4.1 tells you the home has a meaningful radon source. The EPA drew the line at 4 for a reason - it's not an arbitrary number. Acting on a 4.1 is a sound decision.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0245", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "My radon is 2.3 pCi/L year-round. Should I mitigate or leave it alone?", "answer": "2.3 pCi/L is below the EPA action level, and the EPA says levels below 2 are lower risk. Between 2 and 4, the agency says the risk is real but lower and mitigation is worth considering. At 2.3, there's no urgent mandate to act, but if you have young children in the home, someone sleeping in the basement, or a personal risk tolerance that says \"I'd rather have it lower,\" mitigation at that level is a legitimate and reasonable choice. It's genuinely a judgment call at 2.3.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0246", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "Is 1.9 pCi/L in my basement safe?", "answer": "The honest answer is that there's no level of radon that's completely without risk - it's a radiation dose that accumulates over time. 1.9 pCi/L is below the EPA action level and in the range where most professionals would not recommend mitigation unless you have other factors (very high occupancy hours, particularly vulnerable household members). It's not zero risk; it's a low-level risk that most people don't act on. If it stays below 2 year-round and you don't have specific reasons to push lower, it's a reasonable situation to accept while staying aware.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0247", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "We tested in summer and got 1.1 and then tested in winter and got 4.8. Which test should we go by?", "answer": "Go by the winter test. The purpose of radon testing is to understand your real exposure - and your real exposure is driven by the conditions under which you actually live. For most families in northern climates, winter is the bulk of indoor time, and 4.8 pCi/L during that period is the number that matters for your health calculus. The 1.1 in summer is real information, but making your mitigation decision based on the lower number would mean ignoring the reading that reflects your actual highest-exposure months.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0248", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "Does it matter if I live in a radon-prone state like Iowa or Colorado?", "answer": "It matters in the sense that you should absolutely test - these states have higher rates of homes with elevated radon based on their geology. Iowa consistently ranks as one of the highest average radon states in the U.S. Colorado has areas with granite geology and elevation factors that push levels up. But \"high-radon state\" doesn't mean every home is high, and \"low-radon state\" doesn't mean your home is fine without testing. State averages are a reason to test sooner, not a substitute for testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0249", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "My radon has been between 3.5 and 4.5 all year. Is that unusually stable or should I be suspicious?", "answer": "A range of 3.5 to 4.5 across all seasons without much weather variation would be somewhat unusual - most homes show more seasonal swing than that. It could mean your home has very consistent pressure dynamics, a well-mixed HVAC system that smooths out peaks and valleys, or that your monitor's sensor is averaging readings in a way that dampens the variation. It's worth noting whether weather events produce visible spikes on the monitor. If the reading is genuinely flat across seasons and weather, a comparison against a professional test kit would confirm the number is real.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0250", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "My radon dropped from 6 to 1.2 after mitigation. A year later it's crept up to 2.8. Should I be worried?", "answer": "A post-mitigation creep from 1.2 to 2.8 over a year is worth investigating. Common causes: the fan is weakening (check the manometer or pressure gauge), a new foundation crack has opened that the existing suction point doesn't cover well, or a change in the house (new sump pit, remodeling work) has added entry points. 2.8 is still below the EPA action level, but the upward trend is a signal that the system may need attention. Having the contractor re-check suction and system performance is the right move.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0251", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "I had radon mitigation done 8 years ago and never retested. Should I retest now?", "answer": "Yes - 8 years without a post-mitigation test is longer than recommended. EPA guidance suggests retesting every 2 years after mitigation. Over 8 years, the fan may have weakened, new entry pathways may have developed from foundation settling or remodeling, and HVAC changes can affect what the system needs to compensate for. A simple short-term test will tell you whether the system is still performing at the level it was when first installed. It's a low-cost, high-value check.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0252", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "My neighbor had mitigation done and said his radon went up for a few days afterward. Is that possible?", "answer": "Occasionally homeowners notice a short-term fluctuation right after installation - the contractor may have opened and resealed areas of the slab, the curing of sealant around pipe penetrations can take a day or two, and the system may need a short period to stabilize the sub-slab pressure. A brief uptick followed by a sustained reduction is not a sign of a failed installation. Post-mitigation testing is typically done at least 24 hours after installation to let conditions stabilize before reading the result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0253", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "I just tested and got 3.9 pCi/L. Do I really need to do anything since it's technically below 4?", "answer": "Technically, 3.9 is below the EPA action threshold by 0.1 pCi/L. Practically, it's indistinguishable from 4.0 given the accuracy range of any test. The EPA's own guidance says levels between 2 and 4 carry real risk and are worth addressing. At 3.9, you're essentially at the action level. Many homeowners at 3.9 choose to mitigate - the cost is the same whether you're at 3.9 or 4.5, and the peace of mind is worth it. I wouldn't use the technical cutoff as a reason to wait.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0254", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "My radon is 5 pCi/L and I'm trying to decide between mitigation and just ventilating more. Which is better?", "answer": "Mitigation is substantially better for a 5 pCi/L home. Increased ventilation requires ongoing behavior change (opening windows when it's cold, running fans, managing the house differently every day) and it doesn't reliably maintain consistent levels - you'll see readings go up every time ventilation lapses. A sub-slab system runs continuously without any behavior change on your part and typically brings levels well below 2 pCi/L regardless of weather or season. For a persistent 5 pCi/L, mitigation is the right long-term answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0255", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "My radon was 7 pCi/L in December. My contractor wants to install the system in March. Is it okay to wait?", "answer": "Waiting from December to March means 3 more months of exposure at 7 pCi/L - which is above the action level and represents ongoing dose. Whether to wait is a personal decision, but from a health standpoint, sooner is better. If the contractor's March schedule is driven by their workload, it's worth asking if there's any earlier availability or another qualified contractor who can get there sooner. A few months doesn't dramatically change your lifetime cumulative exposure, but there's no benefit to delaying.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0256", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "I've been reading about radon for two hours and now I'm terrified. Is this actually as dangerous as it sounds?", "answer": "Radon is a real and serious health risk - the second leading cause of lung cancer in the U.S. - but it's also a very fixable problem. Unlike many health hazards, radon can be tested for precisely and mitigated effectively with well-understood technology. Knowing you have elevated radon and acting on it puts you ahead of the millions of homeowners who have never tested. The goal is information and action, not fear. If your levels are elevated, a mitigation system typically resolves the problem reliably. If you want to talk through what your specific numbers mean and what your options are, give us a call - that's what we're here for.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-seasonal-weather-environmental-0257", "phase": "phase3", "type": "answered_qna", "topic": "workflow-seasonal-weather-environmental", "category": "workflow-seasonal-weather-environmental", "subtopic": "Closing Questions and Practical Decisions", "question": "My monitor shows 6 pCi/L and I'm reading all these weather and seasonal explanations. Does that mean I should wait to see if it goes lower on its own?", "answer": "No. At 6 pCi/L, the reading is meaningfully above the EPA action level regardless of what season or weather contributed to it. Waiting for it to drop on its own is waiting for spring or summer to lower it back to 3-4 - which is still elevated and which just restarts the cycle every fall. The seasonal and weather explanations describe why your number changes, not why you shouldn't address it. The appropriate response to a sustained 6 pCi/L is mitigation, not patience.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "workflow-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0001", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "I rent a basement apartment. What should I know about radon?", "answer": "Basement apartments tend to have the highest radon levels in any building because radon enters from the soil below and concentrates in the lowest spaces. If you haven't tested yet, that's the first thing to do - short-term test kits are inexpensive and widely available, or you can pick up a continuous monitor. The EPA recommends fixing at 4.0 pCi/L or higher, and the risk doesn't go away just because you're renting rather than owning.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0002", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "Can I test for radon in my rental?", "answer": "Yes, you can absolutely test your own rental. Short-term charcoal canister tests run under twenty dollars at most hardware stores - you place one for 48-96 hours and mail it in. A continuous monitor like an Airthings or RadonEye gives you ongoing numbers. Nothing about renting stops you from knowing what the air in your home looks like.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0003", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "Should I buy a radon monitor as a renter?", "answer": "It's a smart move, especially if you're on a lower floor or in a basement unit. A monitor lets you see actual long-term averages rather than a single snapshot, and if you move, you can take it with you. The entry-level Airthings Wave Plus or a RadonEye RD200 are popular options that give you a running average over time - which is what really matters for assessing your exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0004", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "I bought an Airthings for my rental and it shows 5.2 pCi/L. What can I do?", "answer": "That reading is above the EPA's 4.0 pCi/L action level, so it's worth taking seriously. Start by documenting it - screenshot the app, note the date and your floor level. Then bring it to your landlord in writing. A mitigation system in a rental is the landlord's responsibility to install, not yours, but you need to get them engaged. If they ignore you, look into your state's tenant protection laws or contact your local health department.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0005", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "My rental has a radon mitigation system already. How do I know it's working?", "answer": "Look for the U-tube manometer on the pipe - it's a small gauge that shows whether the fan is creating suction. The fluid should be uneven on the two sides, indicating negative pressure. You can also run a radon test or use a continuous monitor to verify the actual air levels are below 4.0 pCi/L. A system that's running doesn't automatically mean it's working well; a test gives you the real answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0006", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "My landlord mitigated radon before I moved in but never gave me a post-mitigation report. Should I ask for it?", "answer": "Yes, ask for it. A post-mitigation test result is the only way to confirm the system worked. \"We installed a system\" and \"radon is now under control\" are two different things, and you deserve to see the actual numbers. If the landlord doesn't have one, that's a sign post-mitigation testing wasn't done properly - and you should run your own test now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0007", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "I'm renting and the landlord says the radon was fixed 5 years ago. Should I test anyway?", "answer": "Yes. Radon levels can change over time as soil conditions shift, the building settles, or the mitigation fan degrades. A five-year-old result tells you what was happening five years ago. An inexpensive short-term test or a continuous monitor tells you what's happening right now, which is what actually matters for your exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0008", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "I rent from a private landlord (not a company). Can I ask them to test for radon?", "answer": "Absolutely. Private landlords have the same general duty to maintain a habitable home as corporate property managers. The conversation tends to be more informal with an individual landlord - sometimes that's actually easier. You could offer to do the test yourself and share the results, which takes the burden off them and gets you the information you need. Most reasonable landlords, once they understand what radon is, are willing to address it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0009", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "I'm moving into a basement unit. What radon questions should I ask the landlord before signing?", "answer": "Ask whether the building has ever been tested for radon, and if so, request a copy of the results. Ask whether a mitigation system is installed, and if it is, when it was last serviced and whether there's a post-mitigation test result. Ask if the building is in a radon zone area. And honestly, if the landlord can't answer any of these and the unit is below grade, plan to test immediately after moving in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0010", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "I asked my landlord about radon and they acted like I was speaking a foreign language. What do I do?", "answer": "That's pretty common, especially with smaller private landlords. You can educate them briefly - explain that radon is an odorless gas that comes up from the soil and can build up in lower floors, and that the EPA recommends fixing it above 4.0 pCi/L. Offer to do a simple test yourself. If you get the results and they're elevated, that gives you something concrete to work with rather than an abstract conversation about a gas they've never thought about.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0011", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "I'm renting month-to-month and the radon is high. My landlord is dragging their feet. What are my options?", "answer": "Document everything in writing - your test results, the dates you notified the landlord, their responses. Check your state's radon laws and habitability codes. Some states allow tenants to withhold rent or make repairs and deduct the cost when landlords fail to address habitability issues, though the rules are strict. Your local health department may also be able to apply pressure. If none of that works and the reading is significantly elevated, you have to weigh the health risk against your practical housing options.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0012", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "My landlord offered to buy a cheap plug-in radon detector at the dollar store to \"prove\" the radon is fine. Should I trust that?", "answer": "No. Inexpensive novelty detectors sold at dollar stores or as smoke detector add-ons are generally not validated radon measurement devices. Accurate radon testing requires either an EPA-registered lab test kit or a continuous monitor that's been calibrated and validated. Ask for a proper charcoal canister test from a state-certified lab or a name-brand continuous monitor - not a gadget that isn't designed to measure radon.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0013", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "What counts as a \"high\" radon level in a rental apartment?", "answer": "The EPA recommends action at 4.0 pCi/L or higher. Levels between 2.0 and 4.0 pCi/L are lower-risk but worth paying attention to - the EPA says considering mitigation in that range is reasonable. Below 2.0 pCi/L is closer to average outdoor background levels. There's no level that carries zero risk, but 4.0 is the widely-used threshold for taking action.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0014", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "I'm a first-time renter and I've never heard of radon. Is it actually a big deal?", "answer": "Radon is the second leading cause of lung cancer in the United States after smoking - it causes tens of thousands of deaths per year. That sounds alarming, but the risk is from long-term cumulative exposure, not from a day or a week. The good news is it's very fixable when it's found. Knowing your levels and addressing them if they're high is a simple, practical thing that matters for long-term health.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0015", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "My neighbor in the same building says their radon is fine but mine is 5.0. How is that possible?", "answer": "Radon levels can vary significantly unit to unit in the same building depending on floor level, proximity to soil, the presence of cracks or penetrations, and air pressure differences between units. A ground-floor or basement unit can have levels multiple times higher than a second-floor unit. Your neighbor's result doesn't tell you anything meaningful about your unit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0016", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "I just started renting and I want to test for radon. Where do I even get a test kit?", "answer": "Short-term charcoal canister kits are available at most hardware stores - Home Depot, Lowe's, Menards - usually in the electrical or home safety section. You can also order them online or through your state radon program, which sometimes offers discounted or free kits. Place the test in the lowest livable space, leave it for 48-96 hours, then mail it to the lab in the included envelope.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0017", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "I'm renting a ground-floor apartment, not technically a basement. Do I still need to worry about radon?", "answer": "Yes. Ground-floor units are in direct contact with or very close to the soil, and radon enters through concrete slabs, floor joints, and foundation penetrations. Ground-floor apartments can have radon levels just as high as basement units. Test regardless of whether you call it a basement or a ground-floor unit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0018", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "My landlord told me radon only affects homeowners, not renters. Is that true?", "answer": "No. Radon doesn't care who owns the building - it accumulates in whatever space is there. Renters in basement and ground-floor units are exposed just as much as homeowners living in the same type of space. The landlord's statement is incorrect.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0019", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "I told my landlord about high radon and they said they'll \"look into it.\" That was two months ago. What do I do?", "answer": "Put something in writing - email or text - so there's a documented record. Give a specific timeframe: \"I'd like to understand the plan within two weeks.\" If they continue to ignore it, contact your local health department or your state radon office; some states have complaint processes. You can also consult a tenant's rights organization about your options under local habitability law.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0020", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "Does radon affect short-term health? I've been feeling tired and getting headaches. Is it radon?", "answer": "Radon does not cause short-term symptoms. It's not like carbon monoxide - there's no acute poisoning effect. The danger from radon is cumulative, long-term lung-cancer risk from years of exposure to radiation. If you're having headaches, fatigue, or other symptoms, look into other causes. For any health concerns, talk to your doctor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0021", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Basic Tenant Awareness", "question": "My rental has a basement but I live on the second floor. Do I need to worry about radon?", "answer": "The risk is lower the higher up you live in a building, but it's not zero. If radon is entering the basement and the building has poor air circulation or is tightly sealed, it can migrate upward. A test on your floor is the only way to know for sure. Most second-floor units in residential buildings have relatively low levels, but in some buildings it can still be measurable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0022", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "What kind of radon test should I use in my rental apartment?", "answer": "For a baseline check, a short-term charcoal canister test (48-96 hours) is easy and inexpensive. If you want ongoing awareness, a continuous electronic monitor like an Airthings or RadonEye gives you a running long-term average that's more meaningful than a single snapshot. Long-term alpha track tests (90 days or more) give you the most accurate seasonal average but take time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0023", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "Can I do a radon test in my rental without telling the landlord?", "answer": "Yes. There's nothing preventing you from testing the air in a space you're renting. You're breathing that air; you have every right to know what's in it. Whether you choose to share the results with the landlord is up to you - though if levels are elevated, you'll need to involve them since you can't install a mitigation system yourself.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0024", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "I want to do a short-term radon test in my apartment. Where do I place it?", "answer": "Place the test in the lowest livable level you spend time in - typically the bedroom or main living area, not a utility room or bathroom. Keep it at least 20 inches off the floor, away from drafts, exterior walls, and windows. Don't test in a closet, a space that's rarely used, or right next to an HVAC vent.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0025", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "How long does a charcoal canister radon test take?", "answer": "Most short-term charcoal canister tests require 48-96 hours of exposure, then you mail the canister to the lab. Results typically come back within a week of the lab receiving it, sometimes faster. The whole process is usually two to three weeks from purchase to result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0026", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "My short-term radon test came back at 4.8 pCi/L. Is that accurate enough to act on?", "answer": "Short-term tests are reliable enough to flag a potential problem, but a single short-term result has more variability than a long-term average. At 4.8, you're above the EPA action level. I'd either run a second short-term test to confirm or get a continuous monitor running. The EPA guidance is to take action if two short-term tests both come back at or above 4.0. Even so, 4.8 is not a borderline result - it's worth pursuing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0027", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "I did two short-term tests and got 3.8 and 4.2 pCi/L. Average is 4.0. Do I need mitigation?", "answer": "The EPA action level is 4.0 pCi/L. An average right at that line is a signal to take it seriously. Mitigation at 4.0 is recommended; between 2.0 and 4.0 it's worth considering. You're right at the line, and given the risk is cumulative over years, I'd lean toward addressing it rather than watching and waiting.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0028", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "Can I use a radon test I find on Amazon?", "answer": "Yes, if it's a legitimate product from a reputable brand and uses an EPA-registered lab for analysis. Look for kits that include a prepaid return mailer to a state-certified lab, or continuous monitors from established brands. Avoid generic \"radon alarm\" devices that don't have documented measurement methodology or calibration data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0029", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "My Airthings has been running for 3 weeks and shows 3.1 pCi/L. Is that a reliable reading?", "answer": "Getting more reliable. The Airthings algorithm tends to become more accurate over the first few weeks as it builds a longer dataset. Three weeks is solid - you're starting to see a meaningful long-term average. Continue monitoring; at 3.1 you're below the EPA action level but in the range where the EPA says mitigation is worth considering. Worth watching over another month or two.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0030", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "My RadonEye is showing 6.8 pCi/L in my basement apartment. Is that device accurate?", "answer": "The RadonEye RD200 is one of the better residential monitors on the market and generally performs well compared to professional test results. At 6.8 pCi/L, even with some measurement variability, you're well above the 4.0 action level. This is worth acting on - take it to your landlord with the reading and date documented.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0031", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "Should I test radon in winter or summer?", "answer": "You can test any time of year, and with a continuous monitor you'll see the seasonal pattern. Radon levels tend to be higher in winter because windows are closed, homes are sealed up, and heating systems can pull more air from the ground. If you test only in summer with windows open, you may get a lower reading than what you're actually exposed to on average. Many experts recommend testing during the heating season to see a realistic elevated scenario.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0032", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "I ran a radon test in my apartment while the windows were open. Do I need to redo it?", "answer": "Yes. Testing with windows and doors open underestimates typical exposure because you're artificially ventilating the space. The EPA protocol for short-term testing calls for closed-house conditions (windows and exterior doors closed except for normal entry and exit) for at least 12 hours before and during the test. Redo it with closed-house conditions for an accurate result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0033", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "My building's property manager offered to test the common areas for radon. Does that help me?", "answer": "Not really, no. Common area levels don't tell you what's happening inside your unit. Radon varies unit by unit based on floor level, construction details, and pressure dynamics. A test in the lobby or hallway is basically irrelevant to what you're breathing in your apartment. If you want to know your exposure, test inside your unit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0034", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "Do I need a professional to test radon in my rental, or can I do it myself?", "answer": "You can do it yourself with a consumer test kit or monitor - no professional required. However, if you're using the results for a legal dispute with a landlord or a regulatory complaint, a test performed by a state-certified radon measurement professional carries more official weight. For your own knowledge and for approaching your landlord, a consumer test is perfectly fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0035", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "I've been renting for two years and never tested for radon. Is it too late to be useful?", "answer": "It's never too late to test. You can't undo past exposure, but knowing the current level tells you what's happening right now - which matters for how much longer you plan to stay and whether you should push your landlord for mitigation. Test now and let the result guide your next steps.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0036", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "My landlord's property management company tested all units. My unit tested at 2.8 pCi/L. What does that mean for me?", "answer": "2.8 pCi/L is below the EPA's 4.0 action level but above the typical outdoor background of around 0.4 pCi/L. The EPA says levels between 2.0 and 4.0 are worth considering mitigation - the risk is lower, but real. If you're on a lower floor and plan to stay long term, it's a reasonable thing to bring up with your landlord or monitor over time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0037", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "My apartment radon test came back at 1.4 pCi/L. Can I stop worrying?", "answer": "1.4 pCi/L is a low reading. While there's no radon level that carries zero risk, 1.4 is close to normal background levels - it's not something that warrants urgent action. Continue to be aware of it if your floor level or building use patterns change.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0038", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "Is there a free or cheap radon test program for renters?", "answer": "Many states offer subsidized or free radon test kits through their state radon programs, often through the state health department or environmental agency. Some utility companies also run periodic radon awareness campaigns with discounted kits. It's worth checking your state's program before buying one at full price.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0039", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "I put a radon test near my sump pump. Is that a good location?", "answer": "Placing a test near a sump pit or pump can give you a higher reading than your typical breathing zone, which may or may not reflect your actual exposure. For a general test of your apartment's air, place it in a room you spend significant time in - bedroom, living area - not right next to a known radon entry point. Even so, knowing the level near the sump pit is useful data.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0040", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "The lab says my test result has a margin of error. How much should I trust the number?", "answer": "Short-term charcoal tests typically have a lab-reported measurement uncertainty of plus or minus 10-20%. That means a result of 4.5 pCi/L could realistically be anywhere from about 3.6 to 5.4. At marginal readings right around 4.0, this uncertainty matters - it's one reason to run a second test or use a long-term monitor to confirm. At clearly elevated levels, the uncertainty doesn't change the decision to act.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0041", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "My landlord says the test they ran was a short-term test in December and it showed 3.9. Should I trust that?", "answer": "A single short-term test is a starting point, not a definitive answer. December (heating season) tends to show higher radon, which is actually the more conservative scenario. A result of 3.9 in winter is likely near or at typical peak conditions. That's right at the EPA's consideration range. It's not dramatically high, but it's not nothing - I'd track it with a continuous monitor if you're staying long-term.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0042", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "I placed a radon test in my closet. Will that give me a useful reading?", "answer": "Closets are generally not where you spend time breathing, and air circulation there may differ from your main living space. A radon test in a closet doesn't tell you much about your actual exposure. Redo it in a bedroom or living room - somewhere you spend consistent time - at a height of about 20 inches to 6 feet off the floor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0043", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Testing as a Renter", "question": "My landlord tested a different unit in the building and it came back below 4.0. They're using that to say my unit is fine. Should I believe them?", "answer": "No. Radon levels vary unit by unit - different floor levels, different construction details, different pressure dynamics. One unit's test result tells you nothing about another unit. If you want to know your exposure, your unit needs to be tested.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0044", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "My landlord says they tested three years ago and radon was fine. Do they have to test again?", "answer": "Generally, no law requires periodic re-testing unless your state has specific requirements. But a three-year-old test result doesn't warranty current conditions. If you want to know what you're breathing now, do your own test - don't rely on old results from a prior tenancy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-tenant-renter-college-0045", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "My landlord is a management company with hundreds of units. Who do I talk to about radon?", "answer": "Put your concern in writing - email the property manager directly and CC their maintenance department if you have that contact. Ask specifically for documentation of any prior radon testing and their plan to address your reading. Large property management companies often have legal and maintenance protocols; a written complaint creates a paper trail and tends to get taken more seriously than a verbal request.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0046", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "My landlord said they'd fix the radon and then never did. What can I document to protect myself?", "answer": "Keep copies of every communication - emails, texts, voicemails. Take screenshots of your radon monitor readings with timestamps. Write a certified letter to the landlord reiterating the elevated reading and requesting mitigation with a specific deadline. If they still don't act, your documented paper trail is what you'll need if you pursue a formal complaint or legal remedy.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0047", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "Is there a government agency I can report my landlord to for not fixing radon?", "answer": "Your state radon office and local health department are the best starting points. Some states have formal complaint processes for radon-related habitability issues. HUD has guidance about radon in federally subsidized housing. Code enforcement offices in some municipalities also handle habitability complaints. The right agency depends on your state and housing type.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0048", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "I live in Section 8 / HUD-subsidized housing and the radon is high. Do I have extra protections?", "answer": "Yes, potentially. HUD has issued guidance that elevated radon can constitute a habitability issue in federally assisted housing. Your housing authority has obligations under federal guidelines. Contact your local HUD office or housing authority and document the elevated readings in writing. HUD's radon guidance gives you more leverage than a typical market-rate tenant might have.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0049", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "My landlord says they'll fix the radon \"eventually\" but won't give a timeline. What should I do?", "answer": "\"Eventually\" isn't a plan. Ask for a specific date in writing. Frame it as a health matter and reference the EPA's 4.0 pCi/L action level. If they won't commit to a timeline, escalate to your state radon office or health department. Landlords who feel external accountability tends to move faster.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0050", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "The radon mitigation fan in my rental apartment is loud and it runs all the time. Is that normal?", "answer": "Yes, radon fans are designed to run continuously - stopping and starting would undermine the consistent negative pressure that keeps radon out. Most fans are relatively quiet, but the sound level varies by model and how it's installed. A low hum is normal; a grinding or rattling sound might indicate the fan needs service. Let your landlord know if the sound has changed significantly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0051", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "My landlord tested before I moved in and gave me the results showing 3.2 pCi/L. Now two years later I tested and got 5.8. Who pays for mitigation?", "answer": "The landlord is responsible for the physical mitigation system - that's a structural modification to the building. Present your current test results in writing and request mitigation. The fact that levels changed since the prior test is exactly why ongoing monitoring matters. The landlord's old test doesn't negate your current one.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0052", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "What if my landlord lives in the same building as me and they're also affected by the radon? Does that change anything?", "answer": "It changes the dynamic in that your landlord is personally experiencing the same risk, which often makes them more motivated to act. The legal framework is the same, but a shared-interest conversation is often more productive. Approach it as something you're both dealing with together rather than an adversarial demand.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0053", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "My landlord mitigated the radon and said the system is working. But they won't give me the post-mitigation test results. Is that a red flag?", "answer": "Yes. Post-mitigation test results are the proof the system is actually doing what it's supposed to. A landlord who won't share those results either doesn't have them (meaning post-mitigation testing wasn't done) or knows the results weren't as good as hoped. Either way, that's a reason to run your own test and document the results.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0054", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "I asked my landlord about radon and they got defensive and threatened to raise my rent. What do I do?", "answer": "Retaliation against tenants for asserting habitability rights is illegal in most states. Document the threat in writing. Continue to pursue the radon issue through official channels - your state radon program or health department. If the landlord does retaliate, you have potential legal recourse. Don't let intimidation stop you from knowing what you're breathing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0055", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "My landlord's insurance company flagged radon as a liability issue. Is that true?", "answer": "It's increasingly true that insurance companies are paying attention to environmental hazards like radon, particularly in commercial or multi-family properties. That can actually work in your favor as a tenant - a landlord who has been flagged by their insurer has more motivation to address it. If you're in a dispute, it might be worth noting to the landlord that their liability exposure increases the longer elevated radon goes unaddressed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0056", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "I live in a basement apartment with a sump pit in the closet. Could that be why radon is so high?", "answer": "Almost certainly yes, at least in part. Sump pits are open connections directly to the soil and groundwater below your home - they're one of the highest-radon-entry pathways in any basement. If your pit doesn't have a sealed lid, radon is flowing straight up into your air. A sealed sump pit lid is a basic first step, though a full mitigation system usually includes addressing the sump as well.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0057", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "My basement apartment has 7 pCi/L. The landlord says it meets code. Is 7 pCi/L ever okay?", "answer": "No building code \"approves\" 7 pCi/L as an acceptable level - the EPA recommends fixing at 4.0, and 7 is significantly above that. If a landlord is claiming this \"meets code,\" they're misrepresenting the situation. The EPA's action level is not a legal code in most places, but it is the standard of care. 7 pCi/L is a level that warrants mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0058", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "I live in a garden-level apartment. Is that different from a true basement for radon purposes?", "answer": "Not meaningfully. A garden-level unit is partially below grade - the floor or lower walls are in contact with or very close to the soil. Radon entry dynamics are similar to a full basement. In terms of radon risk, treat it the same as a basement and test accordingly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0059", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "I'm 6 months pregnant and living in a basement apartment with 4.6 pCi/L radon. What should I do?", "answer": "First, radon's risk is cumulative from long-term exposure - six months of slightly elevated exposure is not an acute emergency. Even so, 4.6 is above the EPA action level, and pregnancy is a reasonable time to want to reduce all unnecessary health risks. Bring the test result to your landlord in writing and request mitigation. For any specific concerns about health impacts on your pregnancy, talk to your OB. We can also talk through the numbers and what typical mitigation looks like if that's helpful.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0060", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "I've been renting my basement apartment for 3 years. Just found out radon is 6.0. Am I at risk?", "answer": "Six pCi/L for three years is meaningful cumulative exposure. Radon risk is real and proportional to the level and duration of exposure. Even so, radon causes lung cancer over many years of ongoing exposure - you're not facing an acute medical event. What you should do now is get mitigation moving as quickly as possible to reduce your ongoing exposure, and mention your exposure history to your doctor at your next visit so it's documented. You can't undo the past three years, but reducing exposure from this point forward matters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0061", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "My basement apartment floods occasionally. Does that affect radon?", "answer": "Wet basements and radon don't have a straightforward relationship - high moisture can actually slow some radon entry in certain situations, but it can also degrade sealing materials and create other structural issues. A wet basement with cracks, gaps, and a sump pit is generally a higher radon risk regardless. Flooding and radon are both problems worth addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0062", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "I'm renting a basement apartment and the previous tenant left. Is radon worse when an apartment is unoccupied?", "answer": "Radon can accumulate in an unoccupied space faster because there's no ventilation from opening doors and windows and no HVAC running at full occupancy levels. A test right after move-in, especially if the space was closed up for a while, may actually show slightly elevated levels that will settle with normal occupancy and ventilation. Let the space air out and then test under normal closed-house conditions for the most realistic result.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0063", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "My basement apartment has a dirt floor in part of the utility area. Is that a major radon risk?", "answer": "Yes, an exposed earth floor is a significant radon entry point - soil contact is direct and there's no concrete barrier. That's one of the situations where radon entry is essentially unrestricted. If you're renting a space with exposed dirt, that should be disclosed, and it's worth having tested promptly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0064", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "I live in a basement apartment in an older building from the 1940s. Does the age of the building matter for radon?", "answer": "Older buildings often have more cracks, gaps, and less sealing than newer construction, which can mean more radon entry points. But radon entry is driven by pressure dynamics, not just age - some old buildings happen to be in lower-radon geology and test fine. Age is a reason to test, not a warranty of a problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-tenant-renter-college-0065", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "My basement apartment shares a foundation wall with the garage. Does that increase radon risk?", "answer": "It can. Garages often have less sealing than living spaces, and attached garages can be another pathway for soil gases to enter the building. A shared wall with the garage is worth noting, but the test result will tell you more than speculation about building features.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0066", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "I'm in a basement apartment and the radon is 4.2 in the bedroom but 2.1 in the main room. Which number matters more?", "answer": "The bedroom matters more because that's where you spend the most concentrated time - especially sleeping eight hours a night. Cumulative exposure is based on how long you're in a space and at what level. The bedroom is often the most important room to protect.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0067", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "My basement apartment has a dehumidifier running all the time. Does that help with radon?", "answer": "No. Dehumidifiers reduce moisture in the air - they don't filter, dilute, or remove radon gas. Radon is not related to humidity. Running a dehumidifier won't change your radon levels in any meaningful way.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0068", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "I live in a basement unit and my landlord put a vent fan in the window to \"get rid of\" the radon. Does that work?", "answer": "Window fans can provide some dilution ventilation, which can reduce radon levels somewhat - but it's not a reliable or consistent solution. It depends on airflow direction, whether the fan is pulling or pushing, and whether you keep it running. It's also impractical in cold climates to run open windows year-round. A proper sub-slab depressurization system is the engineered solution that consistently works.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0069", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Landlord Responsibilities and Tenant Rights", "question": "Are basement apartments with finished floors better or worse for radon than unfinished concrete?", "answer": "A finished floor with well-sealed materials reduces direct soil contact and can slow radon entry at the surface, but radon still enters through cracks, floor-wall joints, pipes, and other penetrations. Finished floors help marginally but aren't a substitute for testing or mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0070", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "I'm a college student renting a basement apartment. The radon is 5.0 pCi/L. What can I do?", "answer": "5.0 pCi/L is above the EPA action level and worth addressing. As a tenant, you can't install mitigation yourself, but you absolutely can put your landlord on notice in writing with your test result and ask them to address it. If your landlord is unresponsive, check whether your university has a tenant advocacy resource - many universities do, specifically for students dealing with off-campus housing issues.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0071", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "I'm renting a house with roommates off-campus. The basement radon is high. Who's responsible?", "answer": "The landlord is responsible for the building's habitability, including radon. As tenants, you all have the same standing to request mitigation. It's often most effective to make the request as a group - all roommates signing a written request to the landlord carries more weight than one person asking. Document the test result and the date you reported it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0072", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "My college dorm is in a basement-level room. Should I buy a radon monitor?", "answer": "If your dorm room is at or below grade, it's a reasonable thing to check. Most universities have buildings that have been tested, and some have mitigation systems. Ask your campus housing office whether their buildings have been tested for radon - many will have records. If they can't give you a clear answer, a consumer monitor in your room will tell you what you need to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0073", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "I'm subletting a basement apartment for one semester. Is it worth worrying about radon for just a few months?", "answer": "Radon risk is cumulative over years, so four months at elevated levels is a small fraction of a lifetime. Even so, there's no reason to be cavalier about it - if the space has very high levels, even a semester matters incrementally. A quick short-term test will tell you what you're dealing with. If it's moderate, it's probably not worth a major fight for a short sublet. If it's very high - 8, 10, 12 pCi/L - that's worth knowing and pushing back on even for a short stay.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0074", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "I'm renting a basement studio apartment near campus. The landlord is unresponsive. What are my options?", "answer": "Put your test result in writing via email or text so you have documentation. Contact your university's off-campus housing office or student legal services - many schools have resources specifically for this. Your city or county health department may be able to apply pressure. And if the landlord continues to ignore it, evaluate whether staying in that unit is worth the ongoing exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0075", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "I'm in a college house with five roommates. The basement radon is 8.0. We all use the basement as a common room. Is that bad?", "answer": "8.0 pCi/L is twice the EPA action level, and using it as a common room significantly increases everyone's cumulative exposure. Stop spending time in the basement as common space until it's addressed - use other areas of the house. Collectively report to your landlord in writing. If you have a student tenant advocacy resource at your school, this is exactly the kind of situation they handle.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0076", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "My landlord owns a dozen off-campus rental houses and says they \"never have radon problems.\" Should I take their word for it?", "answer": "No. \"We've never had problems\" usually means \"we've never tested.\" Properties that have never been tested haven't identified problems - that's not the same as not having them. Ask for actual test documentation, not a landlord's general sense that everything is fine.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0077", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "I'm moving into a student rental in the fall. Should I ask about radon before I sign the lease?", "answer": "Yes. Ask specifically whether the property has been tested, and if so, request a copy of the results. Ask about the floor level of your room if you're in a multi-story house. If the landlord doesn't have test results and your room will be at or below grade, plan to test shortly after moving in.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0078", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "My university housing department tested the dorms and says radon is fine. But my building is old. Should I trust them?", "answer": "It's reasonable to trust a university that has done actual documented testing. Ask for the specific results for your building and floor - not just a general \"we tested and it's fine\" statement. If they can provide documented results from the last few years, that's meaningful. If they're vague about when or where they tested, that's less reassuring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0079", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "I'm a first-year student moving into a basement single. My parents are worried about radon. What should I tell them?", "answer": "Tell them the worry is legitimate - basement spaces can have elevated radon and it's worth knowing the levels. The practical answer is to pick up an inexpensive short-term test kit or a continuous monitor for your room. That turns an unknown into a known, and if the levels are fine you'll all have peace of mind. If they're elevated, you have something to bring to your housing office.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0080", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "Our landlord is letting us use the unfinished basement for storage and hanging out. Radon is 11 pCi/L down there. Do I need to tell my roommates?", "answer": "Yes, absolutely tell them. 11 pCi/L is a significant level, and everyone who spends time there has a right to know. Stop spending time in the basement, document the reading, and report it to your landlord in writing as a group. This level warrants real urgency from your landlord, not a casual response.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0081", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "I'm an RA in a dorm and a student told me their basement-level room might have high radon. What should I do?", "answer": "Take it seriously and escalate through official channels - your housing office and facilities management. Request documentation of radon testing for that building. If there's no recent test data, ask for a test to be performed. A student shouldn't be breathing significantly elevated radon in housing provided by the institution, and it's your job as RA to make sure the concern gets to the right people.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0082", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "College Students and Short-Term Renters", "question": "My off-campus landlord lives out of state and is basically unreachable. What are my options for the radon issue?", "answer": "Try every contact method you have - email, text, the contact info on your lease - and document all attempts. An out-of-state landlord typically has a local property manager or contact; check your lease for that. If you can't reach anyone, contact your city or county housing code enforcement or health department and file a formal complaint. That usually triggers an official response even when the landlord is non-responsive.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0083", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "What's the best radon monitor for a renter who might move every year or two?", "answer": "A portable continuous monitor is ideal for renters. The Airthings Wave series connects to your phone via Bluetooth and is easy to move. The RadonEye RD200 is another solid option with good accuracy. Both are compact, don't require installation, and you take them with you when you move. The investment makes sense if you'll be renting for several years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0084", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "Can I take my radon monitor with me when I move to a new apartment?", "answer": "Yes. Consumer radon monitors are standalone devices - there's no installation required. You unplug them or remove the batteries, pack them with your stuff, and set them up in the new place. One good monitor can serve you through multiple rentals over many years.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0085", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "My Airthings app shows a new reading every hour. Which number should I look at?", "answer": "Look at the long-term average, not the hourly reading. Radon levels fluctuate significantly hour to hour based on pressure changes, weather, and ventilation. The long-term average (typically the 30-day or 90-day average shown in the app) is what gives you a meaningful picture of your typical exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0086", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "I'm a renter and I'm trying to decide between the Airthings Wave Plus and the RadonEye. Which should I get?", "answer": "Both are solid for renters. The Airthings Wave Plus also monitors humidity, CO2, and other air quality factors in addition to radon, which gives you a fuller picture of your air. The RadonEye RD200 tends to have a faster update cycle and is often preferred for its more granular radon data specifically. If radon is your main concern, RadonEye; if you want broader air quality awareness, Airthings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0087", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "How long does it take for a radon monitor to give me an accurate reading?", "answer": "Most continuous monitors need a few weeks to build a reliable long-term average. The first few days of readings can be more volatile and less meaningful. After 30 days, the long-term average displayed in the app or on the device is considered reasonably accurate. For EPA comparison purposes, a 90-day average is considered the gold standard for long-term testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0088", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "My radon monitor shows high readings in the early morning. Is it actually higher then?", "answer": "Yes, often. Radon tends to peak in early morning hours when buildings have been closed overnight, ventilation is minimal, and soil pressure dynamics favor radon entry. This is normal behavior - it's not a malfunction. Your long-term average is more meaningful than the morning peak.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0089", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "Can I use one radon monitor for multiple apartments by moving it between them?", "answer": "You can, but it takes time to get a meaningful reading in each location. If you're moving between units frequently, you'd spend weeks in each place before the average stabilizes. For a permanent residence, a monitor running continuously is the right approach. For quick assessments of multiple spaces, short-term charcoal canister tests are faster and cheaper.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0090", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "Do I need more than one radon monitor in my apartment?", "answer": "For most apartments, one monitor placed in the lowest level you spend time in is sufficient. If you have a two-level unit with a significant grade change between floors, testing both levels can be informative. But for a typical single-floor apartment, one monitor gives you a good picture.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0091", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "My landlord says my radon monitor is \"not certified\" and their test is the official one. Who's right?", "answer": "Consumer monitors aren't \"certified\" in the same way professional measurement devices are, but good ones are validated and accurate. Your monitor's data is valid and meaningful. A landlord can't simply dismiss a consumer monitor reading - especially if it's a reputable device showing consistently elevated levels. If there's a dispute, a professional test by a certified radon measurement professional settles the question definitively.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0092", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "My Airthings battery died and the reading reset. Does that mean I lost all my data?", "answer": "Airthings devices sync data to the cloud via the app. If your phone was syncing regularly, your historical data should still be in the app. Some data may be lost if the device was offline for a while and hadn't synced. This is one reason to check the app periodically rather than just leaving the device running unattended for months.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0093", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "Can radon levels in my apartment change seasonally on my monitor?", "answer": "Yes, and that's expected. Radon typically rises in winter when buildings are closed up and HVAC pulls more air from below, and tends to be lower in summer with more ventilation. Your monitor will show you this seasonal pattern over time. The annual long-term average is your best estimate of typical exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0094", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "I put my radon monitor in my bedroom closet for better placement. Is that okay?", "answer": "Closets generally have less air circulation than the main room, which can mean slightly different radon levels than your breathing zone. Better to put it on a shelf, nightstand, or dresser in the bedroom itself - somewhere you spend your sleeping hours. The goal is to monitor what you're actually breathing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0095", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Radon Monitors for Renters", "question": "My Airthings shows 3.9 pCi/L but the professional test my landlord did shows 2.7. Why the difference?", "answer": "Short-term professional tests and continuous monitors can differ based on timing, test duration, and placement. A 48-hour professional test captures a specific window; your continuous monitor shows a running average. Differences in placement can also matter. Neither is necessarily wrong - they're measuring different things over different timeframes. At these levels, both readings are in the below-4.0 range, though the difference in the readings is worth noting.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0096", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Multi-Unit Buildings and Condos", "question": "I'm in a 6-unit condo building. One unit has high radon. Does that mean all units have a problem?", "answer": "Not necessarily, but it's a reasonable concern. In a building with shared foundations and airflow pathways, radon in one unit can indicate conditions that exist throughout the building. Floor level matters a lot - lower units are at higher risk. All ground-floor and basement units should be tested, not just the one that flagged first.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0097", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Multi-Unit Buildings and Condos", "question": "I live on the 3rd floor of a 5-story apartment building. Do I need to worry about radon?", "answer": "Third floor in a five-story building - radon is unlikely to be a significant issue at that height. Radon concentrates at the lowest levels and dissipates with height. Most third-floor units in multi-story buildings have very low radon levels. Unless the building has unusual construction or you're getting strange readings, this isn't a priority concern.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0098", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Multi-Unit Buildings and Condos", "question": "My high-rise apartment is on the 15th floor. Is radon even a thing up there?", "answer": "At the 15th floor, radon is not a meaningful concern. By that height, outdoor air dilution and building air exchange make radon levels effectively negligible in the living space. Radon is a ground-level issue.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0099", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Multi-Unit Buildings and Condos", "question": "My downstairs neighbor got a high radon reading. Should I be worried about my unit above theirs?", "answer": "Probably not to the same degree. Radon tends to move from the ground upward and dissipate - your unit above theirs is likely at significantly lower concentration. Even so, if the building has poor air sealing between floors or a shared HVAC system, there can be some distribution. A quick test in your own unit will give you certainty.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0100", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Multi-Unit Buildings and Condos", "question": "Can a radon mitigation system in one unit of a multi-unit building protect all units?", "answer": "A system installed in one unit typically protects that unit specifically. In multi-unit buildings, mitigation systems may be designed to address radon across multiple units if they share sub-slab space and the system is designed for the full footprint. Building-wide or multi-unit mitigation requires coordination and proper design - it's not something one tenant can install and have it benefit everyone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0101", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Multi-Unit Buildings and Condos", "question": "Our apartment building manager said they're going to install a radon system in the basement \"utility area.\" Will that protect my ground-floor apartment?", "answer": "A system in the utility area may help if it addresses the same sub-slab zone as your unit, but it depends entirely on how the building's foundation is constructed and whether the system is designed to create pressure relief under your unit specifically. Ask for post-mitigation test results in your actual living space - that's the only way to confirm your unit is protected.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0102", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Multi-Unit Buildings and Condos", "question": "The building I'm buying into as a condo buyer has a ground-floor unit with known radon. Should that affect my offer on a second-floor unit?", "answer": "Probably not significantly for a second-floor unit. If you're buying a second-floor unit, radon is unlikely to be elevated at your level. The ground-floor unit's radon issue is a building concern, but for your unit specifically, a test of the actual space at closing is the right way to verify the air you'll be breathing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0103", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Multi-Unit Buildings and Condos", "question": "I'm renting in a townhouse with a finished basement unit below me. My floors are the ground level. Can radon from below migrate up to me?", "answer": "Radon in the unit below yours is primarily that tenant's concern - radon doesn't typically migrate upward in significant concentrations through occupied floor space. But if your ground-level unit is directly over the soil or has penetrations to the sub-slab area, you could have your own independent radon entry. Test your unit on its own merits.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0104", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Health Concerns for Renters", "question": "I've been renting a basement apartment for 5 years and just found out radon is 6.0 pCi/L. What do I do about my health?", "answer": "For any health concerns related to past radon exposure, have a conversation with your doctor - let them know your approximate exposure history so it's documented. From a practical standpoint, you can't undo past exposure, but you can reduce future exposure starting today. Get mitigation in motion as quickly as possible. The risk from radon is cumulative and ongoing; lowering your levels now matters.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0105", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Health Concerns for Renters", "question": "I keep getting headaches in my basement apartment. Could it be radon?", "answer": "Radon does not cause headaches, sore throats, dizziness, or any short-term symptoms. It's an odorless, colorless gas that creates risk only through long-term radiation exposure to lung tissue. If you're having headaches in your basement apartment, look at other causes - poor ventilation, carbon monoxide, mold, humidity, or other factors. Get a CO detector if you don't have one, and see your doctor about the headaches.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0106", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Health Concerns for Renters", "question": "My apartment smells musty and I'm worried it's radon. Can I smell radon?", "answer": "No. Radon is completely odorless, tasteless, and invisible - there's no way to detect it with your senses. The musty smell is likely moisture, mold, or mildew, which are common in basement spaces. Both mold and radon can exist together in a basement, and both are worth addressing, but they're completely different problems with different solutions.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0107", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Health Concerns for Renters", "question": "I'm a heavy smoker and I live in a basement apartment with 5.0 pCi/L radon. Should I be extra worried?", "answer": "Yes. Radon exposure and smoking significantly compound each other's lung cancer risk - the combination is far more dangerous than either alone. If you smoke and live in a high-radon environment, your risk is substantially elevated. Getting the radon addressed is even more important in your situation. For anything related to your personal health risk, your doctor is the right person to talk to.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0108", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Health Concerns for Renters", "question": "My child has asthma and we live in a ground-floor apartment with 4.8 pCi/L. Is radon making the asthma worse?", "answer": "Radon doesn't cause or worsen asthma - asthma is a reactive airway condition and radon doesn't directly trigger it. However, the long-term lung cancer risk from radon is real, and with a child in the home, addressing elevated radon makes sense regardless of the asthma. For the asthma itself, look at humidity, mold, dust, and allergen sources in the apartment.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0109", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Health Concerns for Renters", "question": "Is radon worse for pregnant women specifically?", "answer": "The primary concern with radon is long-term lung cancer risk from radiation exposure - that applies to everyone, including pregnant women. There isn't strong evidence that radon poses distinct risks to a developing fetus beyond the general concern about elevated radiation exposure to the mother. For specific guidance during pregnancy, your OB or midwife is the right source. Reducing unnecessary radon exposure during pregnancy is a reasonable precaution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0110", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Health Concerns for Renters", "question": "My elderly mother lives in a basement apartment and I just found out the radon is 5.5. Should I move her?", "answer": "At 5.5 pCi/L, mitigation is warranted. Whether to move her while mitigation is arranged depends on the feasibility of quick mitigation and her overall health. If the landlord can get a mitigation system installed quickly, that may be preferable to the disruption of moving. If the landlord is unresponsive, that changes the calculus. Her doctor can help you weigh the health considerations based on her individual situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0111", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Health Concerns for Renters", "question": "I have a radon level of 3.6 in my apartment and I'm a non-smoker. What's my actual cancer risk?", "answer": "3.6 pCi/L is below the EPA's 4.0 action level but above typical outdoor background. The EPA estimates the lifetime lung cancer risk at 3.6 pCi/L for a non-smoker at roughly 1-2 per 100 people over a lifetime of exposure - which is lower than the risk at higher levels but not zero. The EPA's guidance to consider mitigation between 2.0 and 4.0 is based on this kind of risk calculation. It's a real but modest risk at that level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0112", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Health Concerns for Renters", "question": "My landlord told me that radon isn't dangerous \"unless you're a miner.\" Is that true?", "answer": "That's outdated information based on early radon research, which was primarily conducted on underground miners. Subsequent decades of research have firmly established that residential radon exposure increases lung cancer risk - it's the leading environmental cause of lung cancer and the second leading cause overall after smoking. The EPA, WHO, and every major health organization agree on this. The \"miner myth\" isn't accurate.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0113", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Health Concerns for Renters", "question": "I've been reading about radon online and now I'm anxious about my apartment. How worried should I actually be?", "answer": "The risk from radon is real, but it's proportional to your levels and your duration of exposure. If you haven't tested yet, testing is the most useful thing you can do - it converts anxiety about an unknown into actionable information. If your levels are low, you can relax. If they're elevated, you can take steps. The worst position is not knowing and continuing to worry. Test, then decide based on what you find.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0114", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Mobile and Manufactured Homes", "question": "I live in a mobile home. Can I have a radon problem?", "answer": "Yes. If your mobile home is sited on the ground - whether on a slab, a crawl space, or directly on a frame - it can have radon entry points just like any structure close to the soil. Manufactured homes have been found with elevated radon levels in the same kinds of locations as conventional homes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0115", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Mobile and Manufactured Homes", "question": "Can I get radon mitigation for a manufactured home?", "answer": "Yes, mitigation is possible in manufactured homes, though the approach differs from a traditional slab or basement home. It often involves addressing the crawl space or under-floor area with ventilation or a sub-membrane depressurization system. The specifics depend on how your home is constructed and sited.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0116", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Mobile and Manufactured Homes", "question": "My mobile home is on a slab. How do I test for radon?", "answer": "The same way you'd test any home - a short-term charcoal canister test or a continuous monitor placed in the lowest living area. Slab-on-grade manufactured homes can have radon entering through the slab and floor penetrations just like a site-built home. Place the test in your main living area at about 20 inches off the floor, following the standard closed-house protocol.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0117", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Mobile and Manufactured Homes", "question": "My manufactured home has a crawl space. Is the radon risk higher?", "answer": "Crawl spaces can be significant radon entry zones because there's often a soil surface beneath with limited sealing. Manufactured homes with open crawl spaces are sometimes at higher risk. A vapor barrier and proper ventilation of the crawl space can help, though full mitigation may require specific measures depending on the setup.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0118", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Mobile and Manufactured Homes", "question": "I rent a mobile home in a park. The landlord says they don't test mobile homes for radon. Do I have any options?", "answer": "You can test your own home with a consumer test kit or monitor - you don't need the landlord's permission to find out what the air inside your home looks like. If levels are elevated, you bring that to the landlord, the same as any rental. Mobile home park landlords have the same general habitability obligations as other landlords.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0119", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Mobile and Manufactured Homes", "question": "I bought a used manufactured home and it's on a rented lot. Do I test for radon?", "answer": "Yes. When you move a manufactured home or occupy a home that's been sited somewhere for a while, testing is the first thing to do. Your radon levels depend on the geology of the land your home sits on, not just the structure itself. Test early and test at the lowest level of the home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0120", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Mobile and Manufactured Homes", "question": "Can radon enter a mobile home through the floor vents and ductwork?", "answer": "Radon primarily enters through gaps and penetrations at the floor level, not through the duct system itself. However, if your HVAC draws air from under the floor or from a crawl space, that can contribute to distribution. The main entry pathways are usually the floor-to-wall interface, pipe penetrations, and any gaps in the floor structure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0121", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Mobile and Manufactured Homes", "question": "My manufactured home has plastic sheeting under the floor. Does that help with radon?", "answer": "A ground vapor barrier (plastic sheeting) can reduce radon entry somewhat compared to bare soil, but it's not a reliable mitigation strategy on its own. Tears, gaps, and unsealed edges allow radon to pass through. A proper sub-membrane depressurization system is a more engineered approach for a crawl space situation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0122", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Moving and Lease Decisions", "question": "I'm considering two apartments - one on the second floor and one in the basement. Should radon factor into my decision?", "answer": "It's a legitimate factor, especially for long-term occupancy. Basement apartments tend to have higher radon potential than second-floor units. If both are otherwise equal, the second floor is the lower-radon choice. If the basement apartment has an existing mitigation system with documented results below 4.0, that risk may already be managed - ask for the test results.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0123", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Moving and Lease Decisions", "question": "My lease is up for renewal and I want to make radon testing a condition. How do I approach that?", "answer": "Before you sign the renewal, put your request in writing. Something like: \"As a condition of renewing, I'd like a current radon test completed in the unit, and results shared with me. If levels are at or above 4.0 pCi/L, I'd like a mitigation system installed prior to signing.\" Landlords who want to keep a good tenant will often agree to reasonable requests. Get any agreement in the lease addendum, not just a verbal promise.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0124", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Moving and Lease Decisions", "question": "The radon in my apartment is 4.2. I'm planning to move in 8 months anyway. Should I bother pushing my landlord now?", "answer": "Eight months at 4.2 pCi/L is real cumulative exposure, and the next tenant will face the same issue. It's worth sending your landlord a written notice with the test result - even if mitigation doesn't happen before you leave, you've documented the issue and given the landlord notice, which matters for future tenants and potential liability. For your own current exposure, spending more time on higher floors and ensuring good ventilation helps at the margins.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0125", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Moving and Lease Decisions", "question": "I found a great apartment but it's in a basement and I'm worried about radon. Should I ask for a radon test before signing?", "answer": "Yes, ask before you sign. Request the most recent test results. If the landlord doesn't have any, ask if they'll test as a condition of your signing. If they refuse both requests, factor that into your decision - a landlord who won't provide basic air quality information before you commit to a basement apartment tells you something about how they'll handle concerns after you're locked into a lease.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0126", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Moving and Lease Decisions", "question": "I'm about to move out of a high-radon apartment. Should I document the radon level before I leave?", "answer": "Yes, for two reasons. First, your future landlord may ask about your previous exposure if you raise health questions. Second, if the current landlord tries to deny the problem later or a future tenant asks about the history, your documented record provides evidence. Take screenshots of your monitor readings with dates, or mail yourself a written record that creates a timestamp.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0127", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Moving and Lease Decisions", "question": "I looked up my future apartment's address and found an old radon test in a database. It showed 6.5 ten years ago. What should I ask?", "answer": "Ask the landlord directly whether they've retested since, and if so, ask for the results. If they say they mitigated, ask for the post-mitigation test. If the 6.5 result is the most recent data and nothing was done about it, that's a red flag. A decade-old unmitigated result at 6.5 is not reassuring - test before you commit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0128", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Moving and Lease Decisions", "question": "I'm in a rental and my neighbor's mitigation system is making noise through the shared wall. Is that a sign their system is working or failing?", "answer": "Radon mitigation fans make a low hum when working normally. Vibrations or noise transmitted through shared walls are typically installation issues (poor vibration isolation) rather than a sign the fan is failing. It's worth letting both your landlord and neighbor's landlord know - a well-mounted fan should be largely quiet. It doesn't necessarily mean the system isn't working.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0129", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Steps for Renters", "question": "What are the most important things I can do as a renter to reduce radon in my apartment right now?", "answer": "You have limited control over the building structure, but you can: test to know your actual levels, report elevated results to your landlord in writing, increase ventilation where practical (open windows when weather allows), seal visible cracks and gaps in floors and walls with appropriate caulk, and keep any sump pit covered. These are mitigation-lite measures - not a substitute for a real system, but not nothing either.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0130", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Steps for Renters", "question": "Can I seal floor cracks myself to reduce radon in my rental?", "answer": "You can seal visible floor and wall cracks with polyurethane or epoxy caulk, and it may modestly help. However, sealing alone is not recognized as effective radon mitigation because radon enters through dozens of pathways, many not visible. It's a reasonable supplemental step but not a solution on its own.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0131", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Steps for Renters", "question": "Will opening my windows every day help with the radon in my apartment?", "answer": "Ventilation can dilute radon and temporarily reduce levels - it's not nothing. But it's not a reliable control strategy, especially in climates where you can't practically open windows year-round. Levels typically rebound quickly when windows close. Opening windows while you sleep in warm weather is a practical harm-reduction measure, not a solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0132", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Steps for Renters", "question": "Is a HEPA air purifier helpful for radon?", "answer": "No. HEPA filters capture particles - they don't filter radon gas. Radon is a gas, not a particulate matter. Air purifiers of any kind don't reduce radon levels. This is a common misconception worth clearing up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0133", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Steps for Renters", "question": "Can I install a radon mitigation system myself in my rental?", "answer": "No. Mitigation requires drilling through the foundation slab and installing a fan system - that's a structural modification to the building. You can't and shouldn't do that without the property owner's involvement. It's the landlord's building; mitigation is their responsibility.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0134", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Steps for Renters", "question": "I put a box fan in my basement apartment to increase airflow. Does that help?", "answer": "Increased air exchange can dilute radon somewhat, but a box fan alone doesn't do it in a controlled way. If the fan is pulling outdoor air in and pushing basement air out, there's some dilution effect. But fan placement, direction, and how much outdoor air is actually being brought in all affect how much it helps. It's a partial measure, not a solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0135", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Steps for Renters", "question": "My landlord offered to do the radon mitigation themselves rather than hire a professional. Should I be okay with that?", "answer": "It depends on what they mean. A landlord who has gotten proper training and certification in radon mitigation can technically do the work. But if they mean \"I'll stick a pipe through the floor and see what happens,\" that's not the same thing. A properly designed and installed system requires understanding of sub-slab pressure dynamics and proper fan selection. Post-mitigation testing is essential to verify it worked. Ask that the work be done by or verified by a certified radon mitigation contractor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0136", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Steps for Renters", "question": "How long does radon mitigation typically take to install in an apartment?", "answer": "A standard sub-slab depressurization system in a typical apartment or home takes most of a day to install. The contractor drills a hole in the slab, installs a pipe and fan, and routes it to the exterior. Post-mitigation testing typically follows 24 hours or more after installation. The whole process from installation to verified results is usually about a week.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0137", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Steps for Renters", "question": "After a mitigation system is installed in my rental, how long until the radon levels go down?", "answer": "Radon levels typically drop significantly within 24-48 hours of a properly installed system. A test run after the system is up and running for a day or two will show dramatically lower levels if the system is working correctly. Continuous monitors will show you the change in real time.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0138", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Steps for Renters", "question": "I moved into an apartment that already had a mitigation system. The previous tenant left a radon monitor that shows 1.8 pCi/L. Can I trust that reading?", "answer": "A continuous monitor left by a previous tenant that's showing 1.8 pCi/L is a reasonable indicator that the system is working. But you don't know when the monitor was last checked, whether it's been calibrated, or whether it's functioning properly. Consider running your own short-term test to verify the reading independently, especially if you're going to be living there long-term.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0139", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Steps for Renters", "question": "What if my landlord installs mitigation but it doesn't work? What are my options?", "answer": "A post-mitigation test will reveal whether the system worked. If levels are still above 4.0, the system needs to be evaluated - it may need a larger fan, a different installation point, or additional suction points. Share the post-mitigation test result with your landlord and request the contractor come back to assess. A responsible contractor and landlord will follow through until the system achieves results.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0140", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I just moved in and my Airthings is going crazy - showing 14 pCi/L. Is that right?", "answer": "It could be an accurate reading, or it could be the initial measurement period before the monitor's algorithm stabilizes. However, 14 pCi/L is a level that warrants immediate attention regardless. Open windows to ventilate, document the reading, and contact your landlord the same day in writing. Don't wait. If you have the option to stay elsewhere while this is investigated, that's worth considering for a reading that high.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0141", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My landlord said they \"aired out\" the apartment before I moved in. Does that change the radon?", "answer": "Ventilating a space before occupancy can temporarily lower radon levels, but once normal occupancy patterns resume - windows closed, HVAC running - levels return to their baseline. An \"aired out\" result would underestimate your actual living conditions. Test now under normal conditions with windows and doors closed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0142", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm renting and the unit below me has a mitigation system. Am I benefiting from it?", "answer": "Possibly, but you shouldn't assume so. Mitigation systems are designed for the unit where they're installed. Your unit has its own air dynamics and radon entry pathways. Test your own unit independently to know what you're breathing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0143", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm moving to a new state and not sure about radon levels there. How do I find out?", "answer": "The EPA publishes radon zone maps by county - Zone 1 counties have the highest average radon potential. Your new state will also have a radon program under the health or environmental department with more detailed local information. But zone maps are averages - only testing your actual unit tells you what you're breathing in that specific home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0144", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My landlord said the building was \"built to radon standards.\" What does that mean?", "answer": "Radon-resistant new construction (RRNC) features - passive vent pipes, sealed foundations, sub-slab gravel layers - are included in some buildings built to current standards. If present, these features reduce radon entry compared to a building without them, and adding a fan to the passive pipe is a cheap mitigation upgrade if needed. \"Built to radon standards\" is not the same as \"radon is not a problem\" - a test is still needed to verify levels.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0145", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I rent a room in a house. The radon monitor in the living room shows 3.5 but my bedroom is in the basement. Should I test there too?", "answer": "Yes. Test where you actually sleep. Radon levels on the ground floor can be substantially different from levels in a basement bedroom. The living room monitor doesn't tell you what you're breathing during the eight hours a night you spend in your basement bedroom.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0146", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I live in a vacation rental for 3 weeks every year. Should I worry about radon?", "answer": "Three weeks per year is very low cumulative exposure. Radon risk scales with the amount of time spent in the space. For a vacation rental where you spend a few weeks annually, radon is not a meaningful health concern. It's worth knowing if it's dramatically elevated for your own peace of mind, but it's not a health priority at that occupancy level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0147", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I rent an Airbnb for a month. Should I test for radon?", "answer": "A month is meaningful, especially if it's a basement-level space. A short-term test kit or a portable continuous monitor will give you a reading within a couple days. If levels are elevated, you can inform the host and choose to ventilate more aggressively or evaluate other options. For a one-month stay, you may not have much leverage over the property - but knowing is still better than not knowing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0148", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My landlord has a mitigation system but I notice the U-tube manometer looks the same on both sides. What does that mean?", "answer": "An equal level in both sides of the U-tube manometer means no differential pressure is being created - the fan likely isn't operating or isn't drawing suction through the pipe. That system isn't working. Notify your landlord immediately that the manometer indicates no suction and have them contact the mitigation contractor to inspect the fan.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0149", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "Can radon in my basement apartment affect my pet's health?", "answer": "The same lung cancer risk from radon that applies to people applies to dogs and cats that breathe the same air. Pets that spend significant time in low-lying areas or on the floor may have even more concentrated exposure. For specific concerns about your pet's health, a veterinarian is the right resource - but addressing elevated radon is good for everyone in the home, including animals.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0150", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I rent a converted basement that was once a storage area. Could it have higher radon than a purpose-built basement apartment?", "answer": "Possibly. Converted spaces may have more cracks, unfinished penetrations, and less sealing than purpose-built apartments. If the conversion was done primarily for livability (adding drywall, flooring) without attention to air sealing, the radon entry points may be more numerous. Test it.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0151", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My apartment has a communal laundry room in the basement. Should I limit my time down there?", "answer": "If the basement laundry room has elevated radon, your time down there contributes to your cumulative exposure. Most people spend only short periods in laundry rooms, which limits the overall impact. If you're already dealing with high radon in your unit, limiting unnecessary time in other basement areas is a reasonable precaution. Ask your landlord whether the common areas have been tested.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0152", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm renting a basement apartment and the radon is 9.4. My landlord is taking weeks to respond. Who else can I call?", "answer": "At 9.4 pCi/L you're more than twice the EPA action level - escalate now. Contact your local health department or code enforcement office and file a formal complaint. If your state has a radon program, call them. Document everything you've sent the landlord and the dates. At these levels, you also have the option of moving out for your health - a habitability dispute this clear gives you real legal standing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0153", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm renting a detached garage apartment. Is radon a concern?", "answer": "If the garage apartment is at or near ground level and has a concrete slab or floor that sits on soil, yes - the radon dynamics are similar to any other low-level structure. Garage conversions vary a lot in construction quality and sealing. Test it the same way you'd test any basement-level space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0154", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My apartment has cracks in the concrete floor that have been there since I moved in. Should I caulk them?", "answer": "It's a reasonable step. Visible floor cracks are documented radon entry pathways, and sealing them with polyurethane caulk is easy and inexpensive. It won't solve a significant radon problem on its own, but it's worth doing as part of a general approach to reducing entry points. Notify your landlord about the cracks as a maintenance matter as well.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0155", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I've lived in my basement apartment for 10 years and just found out radon is 5.5. How do I process this?", "answer": "First, understand that what's done is done - you can't change the past decade. The radon risk is real but it's cumulative and probabilistic - elevated radon increases the risk of lung cancer, it doesn't warranty it. What you do from this point forward matters. Get mitigation in motion as fast as you can. Mention your exposure history to your doctor at your next visit so it's documented. Then focus on reducing your ongoing exposure starting now.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-tenant-renter-college-0156", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My landlord keeps saying they'll \"look into getting a quote\" for mitigation. That's been three months. What is a realistic timeline for mitigation?", "answer": "Once a landlord actually engages a contractor, a radon mitigation system is typically installed within a few days to a couple of weeks depending on scheduling. The work itself takes a day. Three months of \"getting a quote\" is delay, not a timeline. Put your request in writing with a specific deadline - say, 30 days to have a contractor scheduled - and make clear you'll contact the health department if that deadline passes.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0157", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I want to show my landlord how serious radon is. What's the best way to explain it to them?", "answer": "Keep it simple: radon is the second leading cause of lung cancer in the United States, causing about 21,000 deaths per year according to the EPA. It's an odorless gas that comes up from the soil and concentrates in lower-level spaces. Fixing it is a one-time mechanical installation that typically lasts for years. The risk of not fixing it is real and ongoing. Most landlords, once they understand this, take it seriously - they're in the property for the long haul too.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0158", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "Can I get radon information specific to my area before I sign a lease in a new city?", "answer": "Your new state's radon program website will have zone maps and guidance specific to your region. The EPA's radon zone map (available at epa.gov) shows county-level radon potential. High-radon zone counties don't warranty your specific unit will be elevated, and low-zone counties don't warranty it won't be - but it gives you a sense of the geology. Test after move-in regardless of the zone.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-tenant-renter-college-0159", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm renting and my continuous monitor has been showing consistent levels over 4.0 for six weeks. Is that enough evidence to take to my landlord?", "answer": "Six weeks of consistent readings over 4.0 is very solid evidence. Export or screenshot the historical data from your monitor app - the trend line showing consistent elevated levels over time is more compelling than a single snapshot. Present that to your landlord in writing along with a written request for mitigation. Consistency over time is hard to argue with.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0160", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My landlord said they'll mitigate when I leave so they can \"do it all at once.\" Is that reasonable?", "answer": "No. Waiting to mitigate until you move out means you're exposed to elevated radon for the remainder of your tenancy. That's not a reasonable position. The mitigation benefits the current occupant as much as a future one. Push back - your health doesn't benefit from a future mitigation system.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0161", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I told my landlord about high radon via a phone call. Is that enough?", "answer": "Follow up every verbal conversation in writing - email or text. A phone call creates no record. \"Per our call today, I'm confirming that I reported radon levels of [X] pCi/L in my unit and requested mitigation\" - sent to the landlord immediately after the call - creates the paper trail you may need later.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0162", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My landlord is a family member and we don't want to make it awkward. How do I bring up radon?", "answer": "Approach it as information-sharing rather than a confrontation. \"Hey, I got a radon test and the levels are a bit elevated - I figured you'd want to know since it's something that should be addressed in the building\" tends to land better than leading with demands. Family landlords are often more willing to fix things once they understand the issue - the challenge is getting past the \"I've never heard of this before\" initial resistance.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0163", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm renting a house with a crawl space instead of a basement. Is crawl space radon different?", "answer": "Crawl spaces are a significant radon entry zone because soil beneath the home is largely exposed. Radon enters through the crawl space and migrates into the living area above through floor penetrations, ductwork, and unsealed gaps. The mitigation approach differs from a basement (often sub-membrane depressurization in the crawl space rather than sub-slab) but the concern is just as real.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0164", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My landlord wants to use caulk and paint as the radon mitigation solution. Is that sufficient?", "answer": "No. Sealants and paint are not recognized as effective radon mitigation by the EPA. They may reduce entry slightly at specific points but don't address the pressure dynamics that drive radon into the building. The standard effective solution is sub-slab depressurization with a fan - that's what reduces pressure beneath the slab so radon can't enter. Caulk is a supplement, not a solution.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0165", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I rented out my basement to a tenant and now they're saying the radon is high. What do I do?", "answer": "Take it seriously and ask for a copy of their test result. If the reading is at or above 4.0 pCi/L, arrange for a professional mitigation contractor to assess the space. You have a habitability obligation to your tenant. Acting promptly not only protects your tenant but also limits your liability. If you'd like to talk through what mitigation typically looks like for a basement rental, feel free to reach out.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0166", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "Is radon higher in a below-grade unit in winter or summer?", "answer": "Generally higher in winter. Closed windows, sealed buildings, and heating systems that draw air from below all drive winter levels up. Summer often shows lower levels due to open windows and natural ventilation. This is why testing during heating season gives you a more conservative (higher) estimate of typical exposure.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0167", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I heard radon can be worse during certain types of weather. Is that true?", "answer": "Yes. Low-pressure weather systems can cause radon to spike temporarily - lower atmospheric pressure allows more soil gas to push up into buildings. Heavy rain can also saturate soil and force radon upward. These weather-related fluctuations are part of why short-term tests and hourly monitor readings can vary, and why long-term averages matter more than any single reading.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0168", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My basement apartment has a wood subfloor over the concrete. Does that help with radon?", "answer": "A wood subfloor adds a layer between you and the concrete, but it doesn't meaningfully reduce radon entry. Radon still comes up through the concrete, penetrations, and the gaps around the subfloor perimeter. A subfloor is not a barrier to radon gas in any practical sense.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0169", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My landlord is willing to fix the radon but wants to do it cheaply with a single fan and minimal pipe. Should I be concerned?", "answer": "System design matters. A system with too small a fan or a poorly placed suction point may not reduce levels adequately. The right system depends on sub-slab communication (whether suction under one point draws down the whole area), the size of the building footprint, and the radon entry characteristics. Ask that a post-mitigation test be done to verify effectiveness - if the cheap system works, great; if it doesn't achieve results below 4.0, the landlord needs to go back and do it right.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0170", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm looking at apartments and one has a radon mitigation system already installed. Is that a good sign?", "answer": "Generally yes - it means a prior owner or landlord took the issue seriously enough to install a system. But verify that the system is functioning and that post-mitigation test results confirm it's working. A system that's been installed but hasn't been serviced or tested in years may not be performing well. Ask for documentation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0171", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm moving into an apartment and the listing says \"radon mitigated.\" What should I verify before signing?", "answer": "Ask for: the original pre-mitigation test result, the installation documentation for the mitigation system, and the post-mitigation test result. Confirm the system is still running (the fan should be audible or a U-tube manometer should show suction). Consider running your own test once you're in. \"Radon mitigated\" is a starting point - the numbers tell the whole story.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0172", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "As a renter, should I care about radon if I'm only going to be in the apartment for a year?", "answer": "One year of elevated radon exposure adds to lifetime cumulative risk. It's not zero - but it's also a smaller fraction of lifetime exposure than long-term residency. Even so, testing is cheap and easy, and knowing your levels is always better than not knowing. If levels are dramatically high - 8, 10 pCi/L or more - even a year is worth addressing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0173", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My apartment has 4.5 pCi/L and my landlord says they won't fix it \"for that little.\" What do I say?", "answer": "4.5 pCi/L is above the EPA action level - it's not a borderline case. You can explain that the EPA's recommendation to mitigate at 4.0 is based on lung cancer risk, not aesthetics, and that \"a little above\" is still in the actionable range. Document your request in writing. If the landlord refuses, your next step is your state health department or radon program.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0174", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm a renter and I want to help my neighbor who's in a worse unit than mine. Can I share my monitor with them?", "answer": "You can let them borrow your monitor - it just takes several weeks to get a meaningful reading for a new location. Alternatively, a short-term charcoal test is quick and inexpensive. Helping a neighbor get a test result is genuinely helpful, especially if you're in the same building and this might prompt a broader landlord response.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0175", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I saw a radon mitigation ad that says they can reduce radon to zero. Is that accurate?", "answer": "No - that's overclaiming. Radon mitigation can dramatically reduce levels and typically brings them well below the EPA action level, but achieving absolute zero is not realistic or necessary. The goal is getting below 4.0 pCi/L and as close to or below 2.0 as practical. Anyone claiming they'll eliminate radon entirely is making a promise the science doesn't support.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0176", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm renting a space from a friend informally - no lease. Do I still have rights around radon?", "answer": "Even informal rental arrangements create some landlord-tenant relationship under most states' laws. Without a written lease, your rights may be harder to enforce, but you're not without them. In practical terms, the conversation with a friend landlord should be relationship-focused rather than legal - explain the issue, share the test results, and approach it as something you're working through together.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0177", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "The radon in my rental has been consistently 3.7 for three months on my monitor. Should I try to push my landlord to fix it?", "answer": "3.7 is just below the EPA action level, but the EPA explicitly says levels between 2.0 and 4.0 are worth considering mitigation because the risk is lower but real. You can certainly make the request - your landlord may be willing, especially if the cost is modest. If they decline at 3.7, you're not in clearly actionable territory legally in most places, but you can continue monitoring and revisit if levels trend up.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0178", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I found a mitigation contractor myself and want my landlord to use them. Can I do that?", "answer": "You can suggest a contractor. Your landlord may prefer to choose their own contractor, which is their right as the property owner. What matters most is that a qualified, certified radon mitigation contractor does the work and that post-mitigation testing confirms results. Who the landlord calls is less important than whether it gets done right.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0179", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I rent a room in a shared house and I live in the basement. My housemates on the upper floors don't care about radon. What can I do?", "answer": "You're in the most exposed space - your concern is valid even if your housemates' concern is low. Your radon exposure is your issue to address regardless of what anyone else in the house thinks. Bring the test result to the landlord directly in your own name. You don't need consensus from your housemates to request a habitability fix for your own room.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0180", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm staying with a friend in their basement for a few months while I save money. Should I worry about radon?", "answer": "A few months is on the shorter end of meaningful exposure, but if the space has very high levels it's not nothing. It's worth picking up a short-term test - they're cheap - to know what you're dealing with. If the reading is dramatically high, you and your friend can decide together whether to address it or adjust your living arrangement.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0181", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm renting a basement in-law suite attached to the main house. Is radon in my unit linked to radon in the main house?", "answer": "In-law suites that share a foundation with the main house often have similar soil contact dynamics, but the radon levels in each space can differ based on air exchange, sealing, and pressure. The in-law suite at below-grade level may actually have higher levels than the main floor above. Test your space specifically.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0182", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm a live-in caregiver staying in the basement of the person I care for. Should I be checking for radon?", "answer": "Yes - you're spending significant time in that basement space, possibly more than the homeowner. Your health matters here too. Suggest to the homeowner that a test is worthwhile, and if they're open to it, run one together. If levels are elevated, both of you benefit from mitigation.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0183", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I live in a basement unit in a building my employer owns as employee housing. Who do I contact about radon?", "answer": "Your employer-landlord has the same habitability obligations as any other landlord. Put your concern in writing to whoever manages the employee housing - facilities management, HR, or your supervisor. Document the test results. If the employer-landlord is unresponsive, your state health department or radon program can provide guidance regardless of the employer relationship.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0184", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My basement apartment is in a converted historic building. Does that affect radon?", "answer": "Older historic buildings often have stone or brick foundations with more gaps and less sealing than modern poured concrete. They can have more radon entry points. Whether they actually have high radon depends on the local geology and soil conditions. The building's age and construction type are a reason to test, not a warranty of a problem.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-tenant-renter-college-0185", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm renting a space above a commercial business and my unit is at street level. Is radon a concern?", "answer": "Ground-level units above commercial spaces can have radon concerns if there's soil contact below the commercial slab and if air from that space migrates into your unit. It depends a lot on how the building is constructed. Test your specific unit at the floor level - that's the only way to know.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0186", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I rent a basement apartment in a duplex. The upstairs owner-occupant says they've never had a problem. Does that mean I'm fine?", "answer": "The upstairs owner is living several feet above the soil - their experience with radon is meaningless for your basement situation. Radon concentrates in the lowest levels. The fact that someone above you has never noticed an issue doesn't tell you anything about what you're breathing below grade. Test your unit.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0187", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm a graduate student in university-provided housing in a basement unit. The university says they comply with all regulations. Does that mean radon is fine?", "answer": "\"Complying with all regulations\" in most states doesn't specifically mean radon has been tested or mitigated - because radon regulations are limited or nonexistent in many states. Ask specifically whether your building and floor have been tested for radon, and request documentation of results. General regulatory compliance is not the same as radon testing.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0188", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "I'm renting a basement apartment in an area that has historically been used for mining. Should I be more concerned about radon?", "answer": "Mining activity can disturb geology and in some cases is associated with elevated radon in surrounding areas. Your region's radon zone status and any local health department data on radon in former mining areas is worth looking into. But the most useful thing is still testing your actual unit - geology and history are context, not your answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0189", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Frequently Asked Scenarios", "question": "My basement apartment is in a building that was originally built as a commercial space and later converted to residential. Does that matter for radon?", "answer": "It can. Commercial-to-residential conversions may have different foundation designs, slab thickness, and sealing compared to purpose-built residential. They may also have penetrations from prior commercial use. None of that tells you what the radon level is - but it's a reason to test rather than assume.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0190", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Understanding Your Radon Test Results as a Renter", "question": "My radon test says 4.1 pCi/L. Is that meaningfully different from 3.9?", "answer": "From a health risk standpoint, 4.1 and 3.9 are essentially the same - the EPA's 4.0 threshold is a guidance value, not a sharp cliff where everything changes. The EPA recommends action at 4.0 or above and says to consider mitigation between 2.0 and 4.0. At 4.1, you're in action-recommended territory. At 3.9, you're just below it but still worth monitoring.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0191", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Understanding Your Radon Test Results as a Renter", "question": "My test came back at 8.3 pCi/L. What category is that?", "answer": "8.3 pCi/L is more than twice the EPA's action level. The EPA's guidance is to act at 4.0 and above - at 8.3, this is a significant finding that warrants prompt mitigation, not a \"we'll get to it eventually\" response. Escalate to your landlord immediately in writing, and if they're slow to respond, contact your health department.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0192", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Understanding Your Radon Test Results as a Renter", "question": "My state's radon program says my county is Zone 1 (high radon potential). My test came back at 2.1. Should I trust the result?", "answer": "Zone 1 means the county has higher radon potential on average - it doesn't mean every home in the county will have high radon. Geology varies at the neighborhood and block level. A result of 2.1 is below the action level, and if the test was conducted properly (closed-house conditions, correct placement), it's a valid result. Continue monitoring with a long-term approach if you want ongoing confidence.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0193", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Understanding Your Radon Test Results as a Renter", "question": "I did both a short-term and a long-term test. The short-term said 5.2 and the long-term said 3.6. Which do I use?", "answer": "The long-term test is the more accurate representation of your typical exposure over time. It captures seasonal variation and accounts for the highs and lows that a short-term test might catch or miss depending on when it was run. Use the long-term result as your guide - though 3.6 is still in the range where the EPA says mitigation is worth considering.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0194", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Understanding Your Radon Test Results as a Renter", "question": "The lab report shows pCi/L. My monitor shows WL (working levels). Are those the same?", "answer": "They're related but different units. Picocuries per liter (pCi/L) measures radon concentration in air. Working levels (WL) measure the potential alpha energy from radon decay products. For residential comparisons, pCi/L is the standard unit used by the EPA. One WL is approximately 200 pCi/L of radon. Most consumer monitors and test kits report pCi/L.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0195", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Understanding Your Radon Test Results as a Renter", "question": "My continuous monitor shows pBq/m³ instead of pCi/L. How do I convert it?", "answer": "Divide the Becquerels per cubic meter value by 37 to get pCi/L. So 150 Bq/m³ is about 4.1 pCi/L. European monitors often use Bq/m³; US guidance uses pCi/L. The EPA's action level of 4.0 pCi/L is equivalent to roughly 148 Bq/m³.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0196", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Understanding Your Radon Test Results as a Renter", "question": "My charcoal test report shows a result with an asterisk and a note about QC. What does that mean?", "answer": "An asterisk with a quality control note usually means something about the test conditions fell outside the ideal parameters - it could be the test ran too long, was exposed to some air flow, or had a chain-of-custody question. Read the note carefully. If the report says the result should not be relied upon, request a replacement kit and retest. If it's a minor QC flag with a still-valid result, the number is likely usable.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0197", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Understanding Your Radon Test Results as a Renter", "question": "I put my test on the windowsill by mistake. Do I need to redo it?", "answer": "Yes. A windowsill is too close to an exterior wall and potentially exposed to drafts, which can significantly alter the result. Redo the test following EPA placement guidelines - at least 20 inches from exterior walls and windows, at breathing zone height, away from drafts and direct sunlight.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0198", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Understanding Your Radon Test Results as a Renter", "question": "My test was open for more than 96 hours because I forgot to mail it right away. Is the result still valid?", "answer": "Check the test kit's instructions - most specify a maximum exposure period. If you exceeded the maximum significantly, the result may be less reliable, and the lab may flag it. Some labs will still process and report the result with a note about the extended exposure time. If there's a significant question, it's worth doing a retest.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0199", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Understanding Your Radon Test Results as a Renter", "question": "I got two test kits and ran them at the same time in the same room. The results were 4.1 and 3.5. Why are they different?", "answer": "Duplicate tests run simultaneously typically show some variation - this is normal and expected. The difference is within the range of typical test-to-test variability for short-term charcoal tests. Average the two results: (4.1 + 3.5) / 2 = 3.8. That average is a more reliable estimate than either individual test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0200", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Understanding Your Radon Test Results as a Renter", "question": "My monitor shows radon in \"counts\" rather than pCi/L. What does that mean?", "answer": "Some simpler radon monitors report internal counts or arbitrary units rather than calibrated pCi/L values. If the device doesn't report in pCi/L, it may not be a calibrated radon measurement tool - it could be a novelty device rather than a real radon monitor. For accurate readings, look for devices that display pCi/L and have documented calibration methodology.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0201", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Conversations with Landlords", "question": "How do I write a letter to my landlord about high radon?", "answer": "Keep it factual and professional. Include: the test result and units (e.g., \"my continuous monitor shows a 30-day average of 5.4 pCi/L\"), the date you discovered it, a reference to the EPA's action level of 4.0 pCi/L, and a specific request (\"I am requesting that radon mitigation be performed by a licensed radon professional within 30 days\"). Send via email so you have a timestamp and record.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-workflow-tenant-renter-college-0202", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Conversations with Landlords", "question": "My landlord keeps saying they'll \"look into it\" without actually doing anything. How do I keep pressure on them without being adversarial?", "answer": "Follow up in writing on a regular cadence - every two weeks is reasonable. Keep the tone informational and neutral: \"Checking back on my request from [date] regarding radon mitigation. Can you share your timeline?\" The paper trail is what protects you. If they continue to stall past a reasonable timeframe, escalate to the health department - that's not adversarial, that's using the system appropriately.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0203", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Conversations with Landlords", "question": "What should I do if my landlord says they've never heard of radon?", "answer": "Take the opportunity to educate them briefly - explain it's an odorless gas from soil that's the second leading cause of lung cancer, that the EPA recommends fixing it above 4.0 pCi/L, and that it's very fixable with a standard system. Give them your test result in writing. Most landlords, once they understand what they're looking at, take it seriously. The ignorance is usually genuine, not malicious.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0204", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Conversations with Landlords", "question": "My landlord said they'll fix the radon \"if you pay for half of it.\" Is that reasonable?", "answer": "No. The mitigation system is a structural improvement to their building. The tenant doesn't pay for structural modifications. You can frame it that way: \"This is an improvement to the property that stays when I move - it's appropriate for the owner to cover the cost.\" If they insist, document the conversation and consult a tenant's rights organization.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0205", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Conversations with Landlords", "question": "My property management company keeps routing me to a maintenance line that never calls back. How do I escalate?", "answer": "Send an email - not just a phone call - to the property management company's general or corporate address, clearly stating the issue, your test result, and the date of your original report. Cc your direct property manager. A written communication to a corporate contact creates accountability that a maintenance voicemail doesn't. If the company ignores written communication on a health and habitability issue, that's when your health department complaint becomes the right next step.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0206", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Conversations with Landlords", "question": "I asked my landlord to test and they sent someone who just walked around with a detector for 5 minutes and said \"it's fine.\" Is that a real test?", "answer": "No. A valid radon test requires either a charcoal canister left in place for 48-96 hours and analyzed by a lab, or a calibrated continuous monitor running for at least a week. Someone walking around with a handheld device for five minutes is not a recognized radon measurement method. Request documentation of a proper test - lab results from a certified facility.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0207", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Conversations with Landlords", "question": "My landlord says they fixed the radon by opening up some vents in the crawl space. Is that mitigation?", "answer": "Crawl space ventilation can help with radon entry in some cases - it's actually a recognized mitigation technique for crawl spaces when done properly (passive vents to the exterior that create airflow). Whether it worked depends on the specific setup and the post-ventilation test results. Ask for documentation that radon was tested after the vents were opened and that levels came down to below 4.0. Without test results, \"we opened some vents\" isn't a verifiable answer.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0208", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Conversations with Landlords", "question": "My landlord told me radon is \"just naturally occurring so it's not their responsibility.\" What's wrong with that argument?", "answer": "Lead paint, asbestos, and carbon monoxide are also naturally occurring or naturally derived - that doesn't exempt landlords from addressing them when they pose health risks. \"Naturally occurring\" is not a legal or ethical defense for maintaining a hazardous living environment. Landlords have habitability obligations regardless of whether the hazard has a natural origin.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0209", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Conversations with Landlords", "question": "How specific should I be when writing to my landlord about radon?", "answer": "As specific as possible. Include: the test method used (short-term charcoal, continuous monitor make/model), the exact reading (e.g., 5.7 pCi/L 30-day average), the placement of the device (bedroom, basement level), the dates the reading covers, and the EPA's guidance (4.0 pCi/L action level). Specificity makes your communication harder to dismiss and signals that you know what you're talking about.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0210", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Practical Conversations with Landlords", "question": "My landlord agreed to mitigate but wants to wait until spring when construction is easier. Is that reasonable?", "answer": "Waiting a few weeks for better weather can be reasonable - radon mitigation involves drilling through a concrete slab and routing pipe to the exterior, and some contractors have seasonal scheduling. A few weeks is different from months. Get the specific target date in writing. More than 6-8 weeks of wait for a serious reading is not acceptable; push for urgency proportional to your exposure level.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0211", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "Is it possible for radon to be high in my unit but the unit next to me on the same floor to be low?", "answer": "Yes, absolutely. Even units on the same floor and level can have different radon levels based on proximity to soil-contact areas, individual HVAC dynamics, the location of penetrations in the slab, and differences in interior air pressure. Neighboring units' test results are useful context but not a substitute for testing your own space.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0212", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "My landlord claims they fixed radon in the whole building. My unit still shows 4.9 on my monitor. Who do I believe?", "answer": "Your monitor. Real-world air in your specific unit is the only thing that matters for your exposure. A building-wide mitigation system may have worked well in some units and less well in others depending on the sub-slab configuration. Show your landlord the continuous reading and ask the mitigation contractor to assess whether your unit's suction zone was properly addressed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0213", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "Can I ask my landlord to add a radon monitor to the unit as a permanent fixture?", "answer": "You can ask. Some landlords are willing to install a basic continuous monitor so they and tenants have ongoing visibility. This is increasingly common in newer and more professionally managed properties. It's a reasonable request, especially if you've had elevated levels in the past or the unit is below grade.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0214", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "I'm moving from a low-radon area to a high-radon area for a new job. Should I build radon awareness into my apartment search?", "answer": "Yes. Ask prospective landlords for radon test results, and prioritize above-grade units if you have a choice. Plan to test within the first few weeks of occupancy. If you're moving to a Zone 1 EPA county, assume there's a higher probability of elevated levels and investigate accordingly.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0215", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "I bought a home radon test kit six months ago and never used it. Is it still good?", "answer": "Short-term charcoal canister kits have a shelf life - typically around one to two years from the manufacturing date, depending on the product. Check the packaging for an expiration date. If it's within date, it should be fine. If you're not sure, the cost of a new kit is low enough that replacing it is the cautious choice.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0216", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "My radon monitor fell off the shelf and hit the floor. Do I need to recalibrate it?", "answer": "Consumer monitors are generally designed to be reasonably durable. A short drop probably didn't affect calibration. Let it run for a few days after repositioning and compare to any historical baseline you have. If readings seem dramatically different from what you'd seen before, contact the manufacturer's support - some brands offer calibration services or replacement programs.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0217", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "I have an old Airthings Wave (original version). Is it still accurate?", "answer": "Older Airthings models can drift over time without factory recalibration. Airthings has historically offered recalibration services for older units. Check the Airthings website or contact their support to see whether your model can be verified or recalibrated. As a general rule, consumer monitors more than 3-5 years old benefit from verification against a professional test.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0218", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "My cousin rents a basement and told me not to worry because \"everyone in the neighborhood has lived here forever with no problems.\" Is that logic sound?", "answer": "No. Radon doesn't cause symptoms - people live with elevated radon for decades and never know it's present. The absence of visible illness in neighbors doesn't mean radon isn't elevated. Lung cancer caused by radon develops over years and decades, and most people don't connect it to where they lived twenty years ago. Your cousin's logic is understandable but not scientifically sound.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0219", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "The apartment I'm looking at has a radon fan installed but the pipe is venting into the attached garage rather than the exterior. Is that okay?", "answer": "No. Radon mitigation systems must vent to the exterior of the building - outdoors where the radon disperses into open air. Venting into an attached garage recirculates radon into a space that's often poorly ventilated and connects to the living area. That's an improper installation. The pipe needs to be extended to vent outside.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0220", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "My Airthings app says my air quality is \"good\" despite showing 4.8 pCi/L for radon. How does the app define \"good\"?", "answer": "The Airthings app's color-coded quality indicators are based on their own thresholds, which may differ from EPA guidance. Don't rely on the color coding for radon - look at the actual pCi/L number. 4.8 pCi/L is above the EPA action level regardless of what color the app shows.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0221", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "I rent an apartment and want to know if my building was ever tested for radon in a government program. How do I find that out?", "answer": "Some states maintain databases of radon test results submitted through certified testers or state programs. Contact your state radon program and ask whether they have historical test records for your address. Not all states have such databases, and not all tests are submitted to state systems, so the absence of a record doesn't mean the building hasn't been tested.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0222", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "I'm moving out soon and the landlord wants to test for radon before I leave. Should I cooperate?", "answer": "Yes - cooperating is the right thing to do, and a test before you leave gives you a documented result from your tenancy period. Make sure you're given a copy of the results. If the test was your landlord's idea and not required under your lease, there's generally no obligation to provide access, but cooperating is reasonable and may benefit future tenants.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0223", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "I'm a renter who does a lot of working from home in my basement office. Does that change how seriously I should take radon?", "answer": "Significantly, yes. Working from home in the basement means you could be spending 8 or more hours a day in the highest-radon zone of the building. Your cumulative exposure is much higher than someone who only sleeps in the basement. If your basement home office has elevated radon, that's a real priority to address.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0224", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "My landlord asked me to not \"make it a big deal\" about the radon to other tenants. Should I comply?", "answer": "No. You have no obligation to keep other tenants in the dark about a health hazard. In fact, warning neighbors who may be in similar situations is a reasonable and ethical thing to do. A landlord asking you to stay quiet about a habitability issue is not a request you're required to honor.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0225", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "My Airthings just updated its firmware. Could that change my radon readings?", "answer": "Firmware updates can sometimes adjust measurement algorithms. After a firmware update, give the device a week or two to re-establish its baseline before drawing conclusions from the new readings. If you see a dramatic unexplained change right after an update, check the Airthings community forums - other users will often note if an update affected readings.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0226", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "I'm renting in a very old brick row house. The basement is unfinished stone. Is that a high-radon situation?", "answer": "Unfinished stone foundations are highly permeable to radon - there's essentially no barrier between the soil and your basement air. Old row houses with stone foundations and unfinished basements are commonly high-radon environments in many regions. If your living space is at or below grade in such a building, testing is a priority.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0227", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "I found out my basement apartment had a previous tenant who complained about radon and nothing was done. What should I do with that information?", "answer": "Use it to push your landlord harder and faster. The fact that a prior tenant flagged the issue and it wasn't addressed is documented history of the landlord's inaction. If you have that information in any written form - a note from the prior tenant, old maintenance records - keep it. It strengthens any formal complaint you might need to file.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0228", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "My landlord is selling the building. Does that change my radon situation as a tenant?", "answer": "If the building is being sold, the new owner takes on the same landlord responsibilities as the old one. Your habitability rights continue through ownership changes. A sale can sometimes create an opportunity - new owners may be more motivated to fix known issues and start fresh, especially if disclosed radon was part of the transaction. Make sure any outstanding radon concerns are documented and communicated to whoever manages your unit after the sale.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0229", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "I'm renting from a real estate investor who owns dozens of properties. Will they take my radon concern seriously?", "answer": "Professional investors with large portfolios are often more organized about habitability issues than individual small landlords, because they have legal and management processes in place. Escalate through their proper management channel in writing. Large landlords also have more liability exposure, which can actually make them more responsive when a formal complaint is filed.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0230", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "What's the simplest possible thing I can do today if I'm worried about radon in my rental?", "answer": "Buy a short-term charcoal radon test at your nearest hardware store, place it in the lowest room you spend time in, follow the instructions, and mail it in at the end of the test period. You'll have results in about two weeks. That's it - everything else can follow from knowing your number.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0231", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "I rent a finished basement apartment. Can radon still get through the drywall and flooring?", "answer": "Radon doesn't come through drywall - it enters through the concrete floor and foundation walls, and through penetrations like pipe chases, utility holes, and the floor-to-wall joint. Finished walls and flooring add some resistance but don't seal off these pathways. The source of entry is below and behind the finished surfaces, not through them.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0232", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "My landlord said the radon test was done \"by a professional\" but couldn't give me the lab report. Should I push for the actual paperwork?", "answer": "Yes. A professional radon test generates a written lab report with the address, date, result, lab ID, and often the tester's certification number. If your landlord can't produce that document, the test either wasn't done or the results weren't favorable. Ask specifically for the lab report - not a verbal summary.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0233", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "My basement apartment has a French drain around the interior perimeter. Does that affect radon?", "answer": "Interior French drains collect water from the base of foundation walls and route it to a sump. They can also create a pathway for soil gas, including radon, to enter along the wall-floor joint. A French drain with an open channel is a more direct radon entry route than a fully sealed slab. In a mitigation design, the French drain and sump system are typically addressed as part of the overall sub-slab pressure approach.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0234", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "I'm renting and just had a baby. Does that change how urgently I should deal with radon above 4.0?", "answer": "A new baby doesn't change the physics of radon, but it's completely understandable to want to minimize all avoidable health risks at home. Radon's danger is cumulative over years, not acute - your infant is not in immediate danger from days or weeks of exposure. Even so, pursuing mitigation promptly is the right call when you have a young child and elevated radon. It reduces long-term exposure for everyone in the home.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-workflow-tenant-renter-college-0235", "phase": "phase3", "type": "answered_qna", "topic": "workflow-tenant-renter-college", "category": "workflow-tenant-renter-college", "subtopic": "Miscellaneous Tenant Questions", "question": "I've tested my rental and everything looks good. Is there anything I should keep in mind going forward?", "answer": "Radon levels can change over time - as buildings settle, soil conditions shift, or mitigation systems (if any) age. Testing every two years, or after any major renovation or significant change to the building, is a reasonable habit. A continuous monitor running in the background gives you passive ongoing awareness without needing to think about it. Low levels now are reassuring; periodic verification keeps them that way.", "source": "cleaned-master/01-big-workflow-expansion-cleaned/tenant-renter-college.md", "public": true, "tags": [ "workflow-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0001", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My aunt just found out her radon is 6.0 pCi/L on her Airthings. She doesn't understand what that means. How do I explain it to her?", "answer": "Tell her: 6.0 pCi/L is above the EPA's action level of 4.0 pCi/L, which means the EPA recommends fixing the home. It doesn't mean there's a crisis, but it's worth addressing. Radon is a naturally occurring gas that can increase lung cancer risk over years of exposure - not days. The fix is a mitigation system, which is installed in one day and continuously lowers radon. Encourage her to call a licensed radon mitigator to get an evaluation. We're happy to talk with her directly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0002", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My son moved into a basement apartment. His Ecosense is reading 4.8 pCi/L. What should he do?", "answer": "4.8 pCi/L is above the EPA action level. Since he's renting, the right step is to notify the landlord in writing that the radon reading is elevated and ask what they plan to do about it. Illinois doesn't have a specific statute mandating landlord radon remediation in all cases, but a documented 4.8 reading is a reasonable basis for requesting action. If the landlord won't act, he should consult an Illinois tenant rights resource or consider whether this is a living situation he wants to stay in long-term. If he'd like guidance on the mitigation process or what to say to the landlord, we can help.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0003", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My neighbor's Airthings hit 7.0 pCi/L after a storm. She's panicking. Is that a real reading or a storm artifact?", "answer": "Storm-related spikes are real - lower barometric pressure during a storm can push more radon into the home. But a single storm spike doesn't define her home's radon level. Tell her to watch the trend over the next 7-14 days and look at the long-term average. If the long-term average is also elevated (above 4.0), then it's worth addressing - but a single storm night at 7.0 doesn't require immediate panic. If her Airthings continues to show a long-term average above 4.0 after conditions normalize, that's when to call a mitigator.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0004", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My grandfather has a SafetySiren that's been going off. He doesn't have a smartphone. What should he do?", "answer": "If his SafetySiren is alarming, it means radon has risen above the device's alert threshold. He should look at the display reading. Encourage him to call a licensed radon mitigator - he doesn't need a smartphone or app for any of this. We'd be happy to talk with him directly if he wants to call and ask questions.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0005", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My friend's home inspector used a RadonEye and told them the house is fine at 3.9 pCi/L. I don't think that's a proper test.", "answer": "Your instinct is worth following up on. In Illinois, a formal real estate radon test must be conducted by a licensed radon measurement professional. If the inspector wasn't licensed for radon measurement or didn't follow closed-building testing protocol, the test may not satisfy state requirements. 3.9 pCi/L is also close enough to the 4.0 action level that a proper licensed test is worth doing to confirm. Recommend your friend ask for the inspector's Illinois radon measurement license number.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0006", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My coworker just bought a house with a radon system already installed. They don't know if it's working.", "answer": "The most reliable way to confirm a mitigation system is working is a current professional post-mitigation radon test by a licensed tester. They should also check whether the manometer gauge (if present) shows a pressure difference. If there's no manometer or they can't read it, a professional test is the definitive answer. If the system isn't working, a radon contractor can diagnose whether it's a fan failure, disconnected pipe, or other issue. We'd be happy to help evaluate the system.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0007", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My mom has lived in her house for 30 years and just found out radon is 5.0 pCi/L. She feels guilty that she didn't know sooner.", "answer": "She shouldn't feel guilty - most people don't test until prompted. Radon testing awareness has grown significantly in recent decades, and many homeowners have never been told to test. The good news is the fix is real: a mitigation system is a one-day installation that can reduce levels dramatically. What matters now is acting, not feeling bad about the past. Encourage her to get it mitigated and move forward. Give us a call if you'd like to discuss the process.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0008", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My landlord installed an Airthings in the common basement and showed me the screen once. It said 3.7. Should I be concerned?", "answer": "3.7 pCi/L is in the range where the EPA says to consider mitigation. Whether it affects your individual unit depends on whether the basement is a habitable space you use, and whether radon migrates upward into your unit. It's worth asking the landlord to let you see the long-term average reading rather than a single glance. If the long-term average is consistently in the 3.5-4.0 range, that's worth a conversation with the landlord about their plans.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0009", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My father-in-law borrowed an Airthings from the library and his reading says 2.8. Is that a reliable test?", "answer": "Many public libraries do lend radon test devices - charcoal canisters more commonly, but some lend electronic monitors. If the device is in good working condition and was placed correctly (lowest occupied area, breathing zone, closed building conditions), the reading is useful context. 2.8 pCi/L is in the \"consider mitigation\" range per EPA. It's below the action level, but not something to ignore entirely, especially if the family spends significant time on that level. For a decision-level reading, a professional test is more defensible than a borrowed consumer device.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0010", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My boss has a RadonEye in the office basement where I work. It reads 4.3 pCi/L. Should I be worried about working down there?", "answer": "4.3 pCi/L is above the EPA action level. The context that matters is how many hours per day you're in that space. If you're working full days in a basement at 4.3 pCi/L, that's a cumulative exposure worth taking seriously. The right step is to let your employer know about the reading and ask about their plans to address it. OSHA doesn't have a specific radon workplace standard, but many employers take this seriously once it's brought to their attention. If the reading is accurate and consistent, mitigation is the appropriate response.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0011", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "The daycare my child attends is in a basement. How do I ask about radon?", "answer": "Ask the director directly: \"Has the facility been tested for radon, and if so, what were the results?\" It's a reasonable question and many reputable daycares will be able to answer it. If they haven't tested, you can suggest they do - Illinois doesn't require testing for daycares but nothing prevents a parent from raising the question. If radon is elevated in a basement daycare, children are spending many hours per week in that air. That's worth advocating for a professional test and, if needed, mitigation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0012", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My daughter's Airthings in her basement rental unit is at 4.6 pCi/L. She wants to know if she should move.", "answer": "Moving is one option, but mitigation is usually the more practical one. Her landlord has a responsibility to respond to a documented radon concern. Recommend she notify the landlord in writing with the specific reading. 4.6 pCi/L is above the EPA action level. If the landlord is unresponsive, she can contact an Illinois tenant rights organization or local health department. Moving doesn't address the underlying problem for future tenants in the unit either.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0013", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My brother has a RadonEye in his basement and says it reads 3.9 pCi/L and he's fine because it's under 4.0.", "answer": "Technically he's right that 3.9 is below the EPA action level of 4.0. But the EPA also says to consider mitigation between 2.0 and 4.0 pCi/L, particularly with consistent readings in that range. 3.9 and 4.0 are not meaningfully different from an exposure perspective. If he or his family spends significant time in the basement, it's a conversation worth having - not a panic, but not a dismissal either. The context of how much time they spend there and whether there are children involved is relevant.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0014", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My mother has an Airthings and doesn't know how to read it. Can you explain what the colors mean?", "answer": "Airthings uses a color indicator as a simple guide: green typically means below about 1.0 pCi/L (good), yellow means in a middle range (worth watching), and red means elevated - above their alert threshold, which generally corresponds to the EPA action level range. The exact thresholds can vary by app version. The most important number is the long-term average displayed in the app - that's the reading to look at when deciding whether to take action.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0015", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My mom's Airthings has been in the yellow zone for weeks. What should I tell her?", "answer": "Yellow typically indicates a reading in the moderate range - below the alarm threshold but above the cleanest range. Weeks of yellow is worth paying attention to. Recommend she check the specific pCi/L value - is the long-term average approaching 4.0? If it's consistently in the 2.0-3.5 range, that's worth monitoring. If it's approaching 4.0, that moves into the \"consider action\" zone. If she'd like a professional opinion on her specific situation, give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0016", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My dad's Airthings just turned red. He's not sure what to do.", "answer": "Red on the Airthings typically means the reading has crossed the alert threshold - often around the EPA action level. Tell him to check the actual pCi/L value to understand the severity. Then encourage him to call a licensed radon mitigator. This isn't a panic - it's a signal to act. The fix is established and effective. Give us a call if he wants to talk through what mitigation would involve.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0017", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My friend shared her Airthings dashboard with me and it shows 4.1 pCi/L in her basement. Should she be worried?", "answer": "4.1 pCi/L is just above the EPA action level. She should take it seriously. \"Worried\" isn't the most useful frame - \"act\" is. The fix is real, the installation is typically one day, and the system runs continuously afterward. Encourage her to get an in-person evaluation from a licensed mitigator to confirm the reading with a professional test and understand what mitigation would involve for her home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0018", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My sister-in-law's Airthings shows 2.7 pCi/L. She asked me if she should get a mitigation system.", "answer": "At 2.7 pCi/L, the EPA says consider mitigation - not required, but not ignore it either. The right answer depends on a few factors: Does she spend a lot of time in the basement? Do children sleep or play there? Is it a bedroom or finished living space? The more time people spend in that air, the more relevant the reading is. A conversation with a mitigator would help her understand whether her specific situation warrants action now or monitoring.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0019", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My grandma's Airthings alarm went off. She panicked. What should I tell her?", "answer": "Tell her to take a breath. The alarm going off means radon has risen above the alert threshold - it's information, not a crisis requiring immediate evacuation. The risk from radon is cumulative over years, not acute from a few days or weeks. Help her note the reading on the display. Encourage her to call a mitigator for an in-person evaluation. We'd be happy to talk with her or her family directly. Radon is fixable.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0020", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My aunt has been showing me screenshots of her Airthings and the graph keeps going up. Should she be concerned?", "answer": "If the trend has been consistently upward over weeks or months, and especially if the long-term average is approaching or above 4.0 pCi/L, it's time to act. A rising trend in a sealed home in winter is normal, but if the baseline keeps rising over months, something may have changed - a new entry point, a sump issue, or seasonal changes settling in. Encourage her to call a mitigator for an evaluation before the reading climbs further.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0021", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My neighbor called me because her Airthings just hit 5.0 pCi/L for the first time. What should I tell her?", "answer": "Tell her 5.0 pCi/L is above the EPA action level and worth addressing. It's not a same-day emergency, but it's a call to a mitigator this week. Radon is a long-term risk - the fix is real and it works. If she wants help finding a licensed mitigator or has questions about what the process looks like, we're here to help.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0022", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My friend's Airthings is showing 8.3 pCi/L and they live in a finished basement. What should I tell them?", "answer": "8.3 pCi/L is more than twice the EPA action level. Living in a finished basement at that level is a significant long-term exposure concern. They should contact a licensed radon mitigator this week - not in a panic, but with urgency. A mitigation system can bring this down dramatically in a short time. If they have questions or want to understand the process, give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0023", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My coworker is freaking out because their Airthings went red. I don't know anything about radon - what are the key facts?", "answer": "Key facts you can share: Radon is a naturally occurring gas from soil. It can enter homes through the foundation. Elevated radon over many years increases lung cancer risk. The EPA action level is 4.0 pCi/L. The fix is a mitigation system - a licensed contractor installs a fan and pipe system that vents radon out before it enters the house. It works, it's affordable, and it's a one-day installation. The red on the Airthings means it's time to call a mitigator, not to panic.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0024", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My uncle installed a radon fan 3 years ago but never tested after installation. His consumer monitor says 1.3 pCi/L. Is that good?", "answer": "1.3 pCi/L is a solid result - near the national average indoor level - and suggests the system is working well. However, he should get a professional post-mitigation test to document the result. Illinois recommends professional post-mitigation testing, and the documentation is valuable if he ever sells the home. Encourage him to schedule a professional test even though the consumer monitor looks good.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0025", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My sister-in-law said her Airthings long-term average is 3.5 pCi/L and she's been ignoring it for 6 months. What should I tell her?", "answer": "Six months of 3.5 pCi/L is meaningful data. It's below the EPA action level of 4.0, but it's in the range where the EPA says to consider mitigation. If she spends significant time in the basement - working, sleeping, entertaining - the cumulative exposure is real. Encourage her to at least have a conversation with a mitigator to understand her options. It doesn't have to be an immediate decision, but 6 months of 3.5 pCi/L shouldn't just keep being ignored.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0026", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My dad's RadonEye is 4 years old. He's asking me if he should replace it.", "answer": "At 4 years old, the RadonEye may still be accurate, but it's getting toward the point where comparing against a fresh professional test or a newer device is reasonable - particularly before making any decision. Manufacturer specs generally don't include an exact expiration date, but sensors can drift over time. If your dad is making a mitigation decision based on this reading, a professional test is the right step regardless of the monitor's age.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0027", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My father-in-law has a radon monitor from the late 1990s. He says it still works. Should he trust it?", "answer": "A monitor from the late 1990s is more than 25 years old. Consumer radon technology has changed significantly. Sensor drift over that time period is a real concern. I wouldn't make any mitigation decision - or any decision not to mitigate - based on a 25-year-old monitor. Strongly recommend a professional test to get a current, reliable reading.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0028", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My sister is renting an apartment and her landlord put in an Airthings. It shows 4.9 pCi/L. Who is responsible for fixing it?", "answer": "The landlord is in a better position to address this than the tenant. Illinois law around landlord radon obligations is developing, but a documented reading at 4.9 pCi/L - above the EPA action level - creates a reasonable basis for a tenant to request remediation in writing. Your sister should put the request in writing, reference the specific reading, and ask the landlord what their plan is. If the landlord won't act, she can explore tenant rights resources or contact the local health department.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0029", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My neighbor's RadonEye stopped working. She's asking me what to do in the meantime.", "answer": "She should get a professional short-term radon test - a charcoal canister sent to a lab - as a temporary replacement. Many home improvement stores carry them, or she can order one. This gives her a reliable reading within a week. If her prior readings were elevated, she shouldn't leave the home unmonitored for an extended period. A new consumer monitor is also an option, but a professional test gives her a defensible reading right now.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0030", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My cousin just moved into a new home and their Ecosense immediately read 4.6 pCi/L. Could the monitor be wrong because it's new?", "answer": "New monitors typically take 24-48 hours to stabilize before their readings are fully reliable. If the Ecosense showed 4.6 in the first hour, that reading may not yet be representative. Give it 48-72 hours and check again. If it's still in the 4.0+ range after a few days, that's worth taking seriously. New homes can absolutely have elevated radon - tight construction and fresh soil contact can mean higher levels initially.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0031", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My coworker's Ecosense shows 5.5 pCi/L and they've been sitting on it for 3 months. What should I tell them?", "answer": "Three months of data at 5.5 pCi/L is not something to sit on longer. The EPA action level is 4.0 pCi/L, and 5.5 is meaningfully above it. Three months of hoping it will improve is not a strategy. Encourage them to call a licensed radon mitigator for an evaluation. The fix is real, the installation is one day, and the results are immediate. Give us a call if they have questions.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0032", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My friend's Ecosense says 3.5 pCi/L but a professional lab test said 5.0 pCi/L. Which one should she trust?", "answer": "The professional test conducted under defined protocol is more defensible for decision-making. Consumer monitors and professional tests can legitimately differ - they're measuring under different conditions. The professional test used closed-building conditions and a calibrated device with lab analysis. If the professional test says 5.0 pCi/L, that's above the EPA action level regardless of what the Ecosense says. Recommend she focus on the professional result.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0033", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My aunt's Ecosense monitor shows 4.2 pCi/L in her finished basement. She only goes down there occasionally. Does exposure time matter?", "answer": "Yes - exposure time matters significantly. The risk from radon is cumulative - total exposure over time determines lung cancer risk, not just the concentration. If she goes down occasionally, her total exposure is lower than someone who spends 8 hours a day there. Even so, 4.2 pCi/L is above the EPA action level, and mitigation would bring it down regardless of how often she uses the space. If she has family members, guests, or a grandchild who plays down there regularly, that changes the picture.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0034", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My mother recently lost her RadonEye after moving. What's the risk of not having a monitor?", "answer": "Without a monitor, she has no visibility into current radon levels - particularly important if she's in a new home she hasn't tested before. A professional short-term test is the best first step in a new home. Once she knows the baseline, she can decide whether to buy a new consumer monitor. If the new home hasn't been tested and she's living there without any monitoring, I'd encourage a professional test sooner rather than later.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0035", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My colleague borrowed a radon monitor from their county health department. Is that accurate?", "answer": "County health departments often lend charcoal canister test kits rather than electronic monitors. If it's a charcoal canister, following the protocol carefully (correct placement, closed-building conditions, minimum exposure time) gives a reliable lab-analyzed result. If it's an electronic monitor, it's likely been handled by multiple borrowers - make sure it's functioning correctly. Either way, it's a reasonable starting point. A charcoal canister from the county is a legitimate way to get a real reading.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0036", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My brother borrowed a radon monitor from his HOA. Is that trustworthy?", "answer": "HOA-lent monitors are useful if they're maintained and working correctly. The risk with shared consumer monitors is that they may have been placed incorrectly by prior users, had batteries removed and replaced, or drifted if they've been sitting unused. A reading from a borrowed HOA monitor is useful context - not a formal test, but informative. If the reading is elevated, follow up with a professional test for confirmation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0037", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My mom's neighbor found radon at 9 pCi/L. My mom hasn't tested her own house. Should she be concerned?", "answer": "One neighbor's elevated reading doesn't automatically mean another neighbor's house has the same level - houses next door can have dramatically different readings based on foundation type, soil conditions, and home construction. But it's a good prompt for her to test. If she hasn't tested recently, now is a good time. Testing is inexpensive and gives her actual information rather than guesswork based on her neighbor's result.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0038", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My dad is in his 70s and his radon is 5.5 pCi/L. He says he's too old to worry about it. Should I push back?", "answer": "Gently, yes. Radon exposure risk is cumulative - reducing exposure even later in life reduces future risk. A mitigation system lowers the radon immediately and continues working for the life of the home. If your dad is selling the house eventually, a mitigated home with documentation is also a selling asset. Frame it as taking care of the home and reducing ongoing exposure - not as a crisis that demands heroic action.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0039", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My parents have lived in their house for 40 years and just found out their radon is 6 pCi/L. Is it worth fixing now?", "answer": "Yes - for two reasons. First, reducing exposure going forward benefits anyone who lives in the home, regardless of past exposure. Second, if they intend to stay in the home or eventually sell it, mitigation adds value and removes a buyer concern. The fact that they didn't know sooner isn't unusual - many homeowners haven't tested. What matters now is acting, not looking back.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0040", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My daughter's boyfriend moved into her basement. The radon is 4.7 pCi/L. Who is responsible?", "answer": "Practically speaking, whoever owns the home is responsible for addressing the radon. 4.7 pCi/L is above the action level for anyone living there, including a newer resident. If your daughter owns the home, mitigation is the right step - not just for the boyfriend but for anyone who spends time in that basement. Give us a call if you'd like to discuss the process.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0041", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My neighbor used her Airthings as her real estate radon test before listing her house. Is that a valid test?", "answer": "In Illinois, no. A consumer Airthings monitor doesn't satisfy the state's real estate radon testing requirement. The test must be conducted by a licensed radon measurement professional using calibrated equipment under closed-building conditions. A buyer's agent should reject an Airthings reading as the formal test documentation. This protects both the buyer and the seller - if the buyer waived a proper test and radon comes up later, the documentation gap creates problems.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0042", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My realtor is using an Airthings as the radon test for the home I'm buying. Should I accept that?", "answer": "No - request a proper licensed radon measurement test. In Illinois, the required test must be conducted by a licensed professional with proper equipment and protocol. An Airthings consumer monitor placed by a realtor does not meet this standard. It's a reasonable and common request, and any reputable realtor should understand and accommodate it.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0043", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My friend told me her Airthings has been at 4.2 pCi/L for 6 months. She keeps saying \"it's under 4.5 so it's fine.\" Is she wrong?", "answer": "The EPA action level is 4.0 pCi/L, not 4.5. She's above it. 4.2 for 6 months is meaningful sustained elevated exposure. Encourage her to look at the EPA guidance directly - the recommendation is to fix at 4.0 and above. \"Under 4.5\" isn't a standard; 4.0 is the threshold the EPA uses. She should consult a mitigator.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0044", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My home inspector said radon can be fixed easily. Is that accurate to tell buyers?", "answer": "Yes - radon is one of the more reliably solvable home issues. A sub-slab depressurization system is a proven technology with a strong track record. Most homes can be mitigated in one day. Post-mitigation testing confirms the result. Even so, \"easy\" can mean different things depending on foundation complexity - some homes are more straightforward than others. The honest framing is: it's fixable, it works, and results can be confirmed.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0045", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My friend's inspector told her the RadonEye she saw at inspection was \"professional grade.\" Is that true?", "answer": "No. RadonEye is a consumer-grade device. Professional-grade continuous radon monitors (CRMs) used in formal testing - devices like Sun Nuclear models or similar - have different specifications, calibration requirements, and chain-of-custody documentation. RadonEye is a quality consumer monitor, but calling it \"professional grade\" in the context of real estate testing standards is inaccurate.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0046", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My mother said her new Airthings \"doesn't work\" because it's showing a reading when she thought radon shouldn't be in her house. Is she misunderstanding something?", "answer": "Yes - radon is naturally present in almost every home. The national average indoor radon level is about 1.3 pCi/L. A reading near that number doesn't mean something is wrong - it means the monitor is working and detecting the naturally present background level. A new Airthings showing 1.0-1.5 pCi/L in the first few days is probably doing exactly what it should. Explain that the question is whether the level is elevated beyond normal, not whether any radon exists at all.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0047", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My landlord says radon is my responsibility as the tenant. Is that true in Illinois?", "answer": "Illinois law on tenant radon responsibility is nuanced. While there isn't a blanket statute that always places the obligation on the landlord, landlords do have general habitability responsibilities. A documented reading at or above 4.0 pCi/L is a reasonable basis for requesting that the landlord address the issue. Recommend putting the request in writing. If the landlord refuses, Illinois tenant rights organizations can provide guidance on your specific situation and lease terms.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0048", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My sister-in-law uses a RadonEye to check homes she's considering buying before making offers. Is that useful?", "answer": "As a preliminary screening tool, yes - a quick RadonEye check can give early information. But it's not a substitute for a formal licensed test during the inspection contingency period. Real estate decisions in Illinois should be based on a test conducted by a licensed professional under protocol. Using a RadonEye before making an offer is informative; using it instead of a proper test is not adequate for a real estate transaction.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0049", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My elderly neighbor got a reading of 7.0 pCi/L and doesn't have family nearby to help. What should she do?", "answer": "Call a licensed radon mitigator directly - that's the right professional for this situation. If she's not comfortable making that call alone, a neighbor, community organization, or local senior services program might be able to help her navigate it. The installation itself is straightforward and doesn't require her to do anything complex - the contractor does the work. If she'd like to call us, we're happy to walk her through the process in plain terms.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0050", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My dad's friend installed their own radon mitigation system from a YouTube video. Now the consumer monitor shows 1.5 pCi/L. Did it work?", "answer": "If the reading dropped significantly from a higher level and has stayed consistently around 1.5 pCi/L, the system may well be doing something useful. However, a DIY installation that hasn't been inspected may have safety issues (improper sealing, wrong fan size, non-compliant pipe routing). Illinois requires a post-mitigation test by a licensed professional - a DIY system wouldn't satisfy that requirement without the professional test. And if radon comes back later, there's no warranty. A professional can evaluate whether the DIY system is properly installed.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0051", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My aunt has shown me a screenshot of her Airthings reading 4.5 pCi/L. She's asking me what to do.", "answer": "Tell her: 4.5 pCi/L is above the EPA action level of 4.0 pCi/L, and the EPA recommends fixing the home at this level. The solution is a radon mitigation system - a licensed contractor installs a fan and venting system in one day, and levels typically drop significantly within 24-48 hours of the system starting. She should call a licensed radon mitigator for an in-home evaluation. We're happy to help if she's in our area.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0052", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My friend says they tested their house with a charcoal canister from Home Depot and it came back at 3.2 pCi/L. Is that accurate?", "answer": "A charcoal canister test from a home improvement store can be accurate if placed correctly (lowest occupied area, proper height, closed-building conditions for the required duration) and mailed to the lab promptly. 3.2 pCi/L is below the 4.0 action level but in the range where the EPA recommends considering mitigation. For a purchasing decision or a formal real estate requirement, a test by a licensed professional is better. For general awareness, a carefully done DIY canister test is informative.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0053", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My neighbor said their radon system was put in by a handyman, not a licensed contractor. Is that a problem?", "answer": "Yes - in Illinois, radon mitigation systems must be installed by a licensed radon mitigation professional. A handyman installation may not be correctly designed, may not comply with Illinois standards, and won't include the required documentation for post-mitigation testing. If the neighbor ever sells the home, the lack of a licensed installation can create complications. A licensed contractor can evaluate the existing system and certify it if it's properly installed, or identify what would need to change.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0054", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My sister's Airthings is reading 6.5 pCi/L and she keeps saying she's going to \"get around to\" calling someone. How do I encourage her?", "answer": "Frame it concretely: at 6.5 pCi/L, the EPA says fix this. Every month that passes is more exposure for everyone in the home. The installation takes one day. It works. She'll feel better knowing the number is going down. Help her make the call if you can - sometimes it just takes someone saying \"let's schedule this\" to move it forward.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0055", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My cousin says he's going to seal the basement cracks himself to fix the radon problem. Is that the right approach?", "answer": "Crack sealing alone is not effective radon mitigation. Radon enters through many pathways - cracks, porous concrete, pipe penetrations, sump pits. Sealing visible cracks may modestly reduce entry but won't reliably keep radon below the action level. Sub-slab depressurization (a radon fan system) is the proven, standard approach because it creates negative pressure below the slab that prevents radon from entering regardless of where the cracks are. Sealing without depressurization is an incomplete fix.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0056", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My neighbor wants to \"air out\" her basement for a month to solve the radon problem. Is that a solution?", "answer": "Ventilation will lower readings while the windows are open, but it's not a solution. When the windows close in winter, radon returns. This approach also isn't compatible with normal living - no one wants to leave basement windows open all winter in Illinois. A mitigation system is designed to continuously prevent radon from entering, not just dilute it after it does. Encourage her to consult a licensed mitigator for the appropriate fix.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0057", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My sister said she read online that plants in the basement reduce radon. Is that true?", "answer": "No - plants don't reduce radon. This is a common misconception. Radon is a radioactive gas that plants do not absorb or neutralize. Some plants improve oxygen levels or filter certain VOCs in the air, but none affect radon. The only approaches that meaningfully reduce radon are mitigation (sub-slab depressurization) and ventilation. Don't tell her to skip mitigation based on a houseplant claim.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0058", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Airthings - Secondhand/Family", "question": "My elderly parents said a home warranty company told them radon is covered. I'm skeptical.", "answer": "Home warranties vary widely in what they cover, and most standard home warranties do not cover radon mitigation systems or testing. If the warranty company told your parents it's covered, get that in writing - specifically what is covered and under what conditions. Radon mitigation is generally not a warranty claim item. If they're relying on a warranty to address an elevated radon reading, verify the terms carefully before counting on it.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0059", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Additional Secondhand Scenarios", "question": "My sister's home inspector is telling her that 3.8 pCi/L is \"basically fine.\" Is that accurate?", "answer": "3.8 pCi/L is below the EPA action level of 4.0, but the EPA also says to consider mitigation in the 2.0-4.0 range. \"Basically fine\" minimizes a real reading. If your sister spends meaningful time in the basement - especially if there are children involved - 3.8 pCi/L merits at least a conversation with a mitigator, not dismissal. The inspector's job is home inspection, not radon risk communication.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0060", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Additional Secondhand Scenarios", "question": "My aunt's landlord claims he's \"not responsible\" for radon because it's a natural occurrence.", "answer": "The natural origin of radon doesn't eliminate a landlord's responsibility to maintain habitable premises. A tenant with documented elevated radon and an unresponsive landlord has options - a written demand letter, the local health department, or consultation with a tenant rights organization. \"It's natural\" is not a legal defense for an uninhabitable living condition.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0061", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Additional Secondhand Scenarios", "question": "My brother-in-law tested his basement and got 2.9 pCi/L. He says that's the end of it - under 4, no action. Should I say something?", "answer": "The EPA guidance says 2.0-4.0 pCi/L is worth considering mitigation. Whether action makes sense at 2.9 depends on how the space is used, whether children spend time there, and how long he's been living there. It's his call, but the \"under 4, no problem\" framing overstates the clean divide. 4.0 is the action level, not a magic threshold below which there's zero risk. A conversation rather than a lecture - but worth raising.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-family-friend-secondhand-questions-recovered-0062", "phase": "phase3", "type": "answered_qna", "topic": "answered-family-friend-secondhand-questions-recovered", "category": "answered-family-friend-secondhand-questions-recovered", "subtopic": "Additional Secondhand Scenarios", "question": "My coworker borrowed a \"professional radon monitor\" from a friend who does home inspections. The reading was 4.8. Should my coworker trust it?", "answer": "If the device the inspector friend used is actually a professional CRM (continuous radon monitor), it may be more precise than a consumer monitor. But for a valid reading, placement and conditions matter as much as the device. If it was placed correctly under closed-building conditions for an appropriate duration, the reading is meaningful. 4.8 pCi/L is above the action level - regardless of which device type was used, that reading warrants professional attention.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0001", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Infant and Young Child Exposure", "question": "My 6-month-old's bedroom is in the finished basement. The radon is 4.3 pCi/L. Is that dangerous for my baby?", "answer": "This is a reasonable concern. 4.3 pCi/L is above the EPA action level. Infants breathe proportionally more air relative to their body size than adults, meaning their exposure per pCi/L is higher. We don't have precise pediatric risk data that differs from the general EPA framework, but the general principle - reduce exposure when possible - applies especially for young children in enclosed spaces. Getting mitigation done now means your baby grows up in a lower-radon environment. Give us a call and we can talk through what's involved.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0002", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Infant and Young Child Exposure", "question": "My toddler plays in the finished basement for hours every day. The Airthings says 3.8 pCi/L. Should I stop letting him play there?", "answer": "3.8 pCi/L is below but close to the EPA action level, and the EPA says to consider mitigation at this level - particularly with consistent exposure. Daily hours in that space, for a small child, is exactly the kind of context that tips the scale toward action even below 4.0. You don't need to ban basement play, but getting mitigation done before this becomes a years-long pattern makes sense. Give us a call to discuss.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0003", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Infant and Young Child Exposure", "question": "My 3-year-old sleeps in a bedroom that is partially below grade. Radon is 2.5 pCi/L. Is that acceptable?", "answer": "2.5 pCi/L is below the EPA action level of 4.0. The EPA says to consider mitigation at 2.0-4.0, and young children spending many hours in the same space is one of the factors that makes \"consider\" lean more seriously toward \"do it.\" 2.5 isn't cause for alarm, but it's not a number to ignore indefinitely if your child will sleep in that room for years. A conversation with a licensed mitigator would help you assess whether the situation warrants action now.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0004", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Infant and Young Child Exposure", "question": "My children's playroom is in the basement. Radon is 5.0 pCi/L. What do I do?", "answer": "5.0 pCi/L is above the EPA action level. Children in a playroom at 5.0 pCi/L for regular hours is a situation worth addressing promptly. Getting mitigation installed is the right step - it's a one-day process and starts working immediately. You can continue using the playroom during normal hours while scheduling the mitigation; there's no need to seal off the space in the meantime. Give us a call so we can put you on the schedule.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0005", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Infant and Young Child Exposure", "question": "My newborn is coming home from the hospital to a house where the basement radon tested at 4.5 pCi/L. The nursery is on the second floor. Should I be concerned?", "answer": "A nursery on the second floor will have lower radon than the basement - radon concentrations generally decrease on upper floors. Your primary concern should be the basement level and whether you spend time there. As long as the nursery is genuinely on the second floor with no unusual air pathways pulling basement air upward, the nursery itself is likely at a lower level. Even so, getting the basement mitigated is still worthwhile for the whole family's long-term benefit. Give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0006", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Pregnancy", "question": "My wife is 20 weeks pregnant and our basement radon is 3.8 pCi/L. Should I be worried?", "answer": "3.8 pCi/L is below the EPA action level but in the \"consider mitigation\" range. The health concern from radon is long-term lung cancer risk from cumulative exposure, not a risk to a developing fetus. There's no established mechanism by which radon directly harms fetal development (this is not a heavy metal or chemical that crosses the placenta the same way). Even so, if your wife spends significant time in the basement, mitigating for everyone's long-term benefit makes sense. For specific concerns about pregnancy, consult her OB.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0007", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Pregnancy", "question": "We just found out we're pregnant. Our radon is 5.2 pCi/L. How urgent is it to mitigate?", "answer": "Getting mitigation scheduled now makes sense - for the whole family. 5.2 pCi/L is above the action level, and acting before the baby arrives means a lower-radon home from day one. Mitigation is a one-day installation and there's no reason to delay because of a pregnancy. The fix benefits your whole family long-term. Give us a call and we can get you on the schedule.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0008", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Pregnancy", "question": "My wife is 8 months pregnant and our radon test came back at 4.8 pCi/L. We're scared. What do we do?", "answer": "First: radon is a long-term lung cancer risk from sustained exposure over years, not an acute danger to a pregnancy or a developing baby from a short-term reading. You don't need to evacuate your home. The right step is to get mitigation scheduled - which you can do before or after the baby arrives, and it's a one-day process. For any specific concerns about the pregnancy, consult her OB. For the radon fix, give us a call and we can walk you through the process.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0009", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Childhood Exposure", "question": "I grew up in a house that I later found out had radon at 6 pCi/L for my entire childhood. Am I at higher risk?", "answer": "Growing up in an elevated radon environment does represent a period of exposure that contributes to lifetime risk. The good news is that lung cancer from radon is not a certainty - it's a risk that increases with cumulative exposure, and many people who've lived with elevated radon don't develop lung cancer. The most important things you can do now are not smoking (the combination of radon and smoking significantly amplifies risk), and if you're a long-term or former smoker, talk to your doctor about lung cancer screening. For current living concerns, make sure wherever you live now is tested and mitigated if needed.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0010", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Childhood Exposure", "question": "My kids grew up in a house with radon at 5 pCi/L for 10 years. We didn't know. What do I tell them now?", "answer": "Tell them the truth with context: radon was elevated in the home, it's a known lung cancer risk factor over long-term exposure, and the most important thing they can do going forward is not smoke and test their current homes. Childhood radon exposure increases risk but doesn't create certainty of harm. Encourage anyone who is a current or former smoker in the family to talk to their doctor about lung cancer screening. The guilt of not knowing sooner is understandable, but what matters now is ensuring their current homes are tested and mitigated if needed.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0011", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Childhood Exposure", "question": "My son is in his 20s and has lived in basement apartments on and off for 6 years. Should I tell him to get tested?", "answer": "At 6 years of potential basement apartment exposure, the practical advice is: make sure his current home is tested, and if he's never tested any previous residence, that history isn't changeable. For his current home, a professional test is the right step. If he smokes or has smoked, encourage him to discuss lung cancer screening with his doctor. Radon risk is cumulative - reducing it going forward matters regardless of past exposure.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0012", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Smokers and Former Smokers", "question": "My husband smokes and our basement radon is 4.5 pCi/L. Is the risk much higher for him?", "answer": "Yes - the combination of smoking and radon exposure significantly amplifies lung cancer risk compared to either factor alone. The EPA has published risk tables showing that smokers at 4.5 pCi/L face considerably higher lung cancer risk than non-smokers at the same level. This is a strong reason to both mitigate the radon and to support your husband in quitting. If he hasn't had a lung cancer screening, he should discuss that with his doctor. Give us a call about mitigation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0013", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Smokers and Former Smokers", "question": "I quit smoking 5 years ago. My radon has been at 4.8 pCi/L for the 3 years I've lived here. Does my smoking history make the radon more dangerous for me?", "answer": "Former smokers carry elevated baseline lung cancer risk from their smoking years. Adding ongoing radon exposure on top of that history does increase cumulative risk further. The time to mitigate is now - reducing exposure going forward still matters even if there's past exposure from both smoking and radon. If you haven't already, ask your doctor about low-dose CT lung cancer screening, which is recommended for former heavy smokers in certain age ranges. Give us a call about the radon mitigation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0014", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Smokers and Former Smokers", "question": "My mother is a lifelong smoker and her radon is 6 pCi/L. She says she already has lung cancer risk from smoking so radon doesn't matter. Is that right?", "answer": "That reasoning undersells the combined risk. Radon and smoking together are far more dangerous than either alone. Even for a smoker who accepts smoking's baseline risk, adding radon on top is meaningfully worse. Mitigation would reduce one of the two risk factors. It's a practical step she can take regardless of smoking status. Encourage her to at least call a mitigator for an estimate - it's a one-day fix that runs continuously after.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0015", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Smokers and Former Smokers", "question": "My dad smoked for 30 years and quit 10 years ago. His radon is 5.5 pCi/L. Should he mitigate?", "answer": "Yes. Former heavy smokers have elevated baseline lung cancer risk from their smoking years. Ongoing radon exposure adds to that risk. Reducing radon exposure going forward still benefits him - the lung cancer risk from radon is cumulative and ongoing. He should also ask his doctor about whether he qualifies for low-dose CT lung cancer screening, which has specific eligibility criteria for former smokers. On the radon side, give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0016", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Elderly Exposure", "question": "My 82-year-old mother's radon is 5.5 pCi/L. Is it worth fixing at her age?", "answer": "Yes - for two reasons. First, she's breathing that air now and for however long she continues to live there. Reducing her ongoing exposure is worthwhile at any age. Second, if she eventually needs to sell the home (for care or estate reasons), a documented mitigated home is more valuable. The installation is a one-day process and is not physically disruptive for a home occupant. Encourage her to get it done. Give us a call if you'd like to talk through the process for her specific home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0017", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Elderly Exposure", "question": "My elderly father refuses to do anything about his radon at 6 pCi/L. He says he's lived there 40 years and he's fine.", "answer": "This is a common and understandable resistance. Forty years is a long exposure if the level has been elevated throughout - but the fix reduces ongoing exposure, which still matters. If you have the relationship to have the conversation, frame it around the home's value and documentation rather than health anxiety. A mitigated home is worth more and sells more cleanly. If he's ever incapacitated or the home needs to be sold for care, having a mitigated home with documentation removes a complication. Sometimes a practical framing works better than a health one.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0018", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Elderly Exposure", "question": "My in-laws are in their late 70s and have elevated radon at 5.0 pCi/L. They live alone and I'm worried about their long-term health.", "answer": "The concern is valid. Radon is a long-term cumulative lung cancer risk, and ongoing exposure at 5.0 pCi/L in a closed home where elderly people spend most of their time is the highest-exposure scenario. Encourage them to get a mitigation estimate - the installation is not physically disruptive and can often be done in a few hours with a crew working in the basement or utility area. Give us a call and we can describe the process in detail so they know what to expect.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0019", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Short-Term High Exposure", "question": "I was in a basement with 20 pCi/L for a weekend. Did I hurt myself?", "answer": "Radon health risk is about long-term cumulative exposure - specifically the number of \"working level months\" of exposure accumulated over years. A weekend at 20 pCi/L is a brief acute exposure that contributes minimally to lifetime risk. You did not meaningfully harm yourself from a single weekend. If the space you'll be spending significant time in regularly tests at elevated levels, that's what requires mitigation - not the past weekend. Radon is not like a chemical that causes immediate symptoms.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0020", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Short-Term High Exposure", "question": "My basement flooded and I was working down there for 3 days with a sump pump running. The RadonEye showed 8 pCi/L. Was I exposed to dangerous levels?", "answer": "Three days at 8 pCi/L is more exposure than a typical brief visit, but radon risk is still primarily about years of cumulative exposure, not days. You're not facing an acute health crisis from 3 days of elevated radon. For future reference, sump pit activity can temporarily spike radon - running the pump draws soil gas through the pit. Going forward, get the home tested under normal conditions and mitigate if the long-term average is elevated.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0021", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Short-Term High Exposure", "question": "We had a party in our basement for 6 hours and the RadonEye showed 9 pCi/L. Should I tell my guests they were exposed to dangerous radon?", "answer": "A 6-hour party at an elevated radon reading is a brief exposure for your guests. Radon risk is cumulative over years of living and working in elevated spaces, not a single-event hazard. You don't need to call your guests with a health warning. What you should do is address the elevated radon in your home going forward - for your family, who does live there.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0022", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Short-Term High Exposure", "question": "I slept in my basement bedroom for one week at 10 pCi/L before I noticed. Is there cause for concern?", "answer": "One week at 10 pCi/L is not going to define your health outcome. Radon risk builds over months and years of sustained exposure, not a single week. The appropriate response is to address the elevated radon now - through mitigation - so that future exposure is reduced. Don't add unnecessary anxiety about the past week; focus on fixing the ongoing problem.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0023", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "\"Is It Too Late\" and Guilt Questions", "question": "We've lived in our house for 15 years and just found out the radon is 6.0 pCi/L. Have we already been harmed?", "answer": "This is an understandable fear. Fifteen years of elevated radon does represent cumulative exposure that increases lung cancer risk. But radon exposure is a risk factor, not a certainty. Many people live with elevated radon and do not develop lung cancer - and many factors (smoking history, genetics, how much time was spent in the highest-radon areas) influence individual risk. What you can do now is mitigate, reducing ongoing exposure from this point forward. If you have concerns about your specific health history, talk with your doctor. Give us a call about the mitigation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0024", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "\"Is It Too Late\" and Guilt Questions", "question": "I knew the radon in our house was at 4.5 pCi/L for years and didn't fix it. Now I feel guilty about my kids' exposure. What should I say to them?", "answer": "You're not alone in this - many families haven't acted as quickly as they later wish they had. The thing to tell your kids, and yourself, is that you're acting now. Kids are resilient, radon exposure increases statistical risk but doesn't cause certain harm, and reducing exposure going forward matters. Getting the mitigation done now and talking about it honestly is a healthier path than carrying guilt silently. Fix it, document it, and move forward.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0025", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "\"Is It Too Late\" and Guilt Questions", "question": "I've had high radon for 3 years and done nothing. My spouse is angry. What do I say?", "answer": "Acknowledge it and act. Three years of delay at elevated radon is not ideal, but it's also not irreversible. The fix still works. Call a licensed mitigator and get it scheduled - that's the most constructive response. The risk from the past 3 years is what it is; reducing ongoing exposure from this point forward is what's within your control now.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0026", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "\"Is It Too Late\" and Guilt Questions", "question": "We bought our house 5 years ago. The inspector said the radon test was acceptable at 3.9 pCi/L. It's now 4.8 pCi/L. What happened and did the inspector mislead us?", "answer": "Radon levels can change over time as homes settle, sump conditions change, and new entry pathways develop. 3.9 pCi/L 5 years ago was just below the action level; 4.8 now is above it. Neither reading necessarily invalidates the other - they're snapshots in time. The inspector told you what they found at that moment under that protocol. Radon is dynamic. The current 4.8 pCi/L is what requires action today - give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0027", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "\"Can I Feel It\" and Symptom Questions", "question": "My throat has been sore for weeks. Could it be from the radon in my basement?", "answer": "Radon doesn't cause a sore throat. Radon's health effect is specifically lung cancer from long-term radiation exposure - it doesn't cause throat irritation, mucus, coughing, or other acute symptoms you would notice in real time. If you're concerned about your throat, see your doctor - that's likely something else. Even so, if you have elevated radon in your home, mitigating it is still worthwhile for long-term lung health, separately from whatever is causing your current throat issue.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0028", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "\"Can I Feel It\" and Symptom Questions", "question": "I feel tired all the time. Could my radon level of 4.2 pCi/L be making me tired?", "answer": "Radon doesn't cause fatigue, headaches, or any acute or noticeable symptoms at typical residential exposure levels. Its effect is long-term cellular damage to lung tissue from radiation, not the kind of impact that makes you feel tired or unwell day to day. If you're experiencing persistent fatigue, see your doctor - there are many common causes worth evaluating. Separately, if your radon is at 4.2 pCi/L, that's worth mitigating for long-term lung health.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0029", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "\"Can I Feel It\" and Symptom Questions", "question": "My husband says he can taste something metallic in our basement. Could that be radon?", "answer": "Radon has no taste, smell, or color - it's completely undetectable to human senses. If your husband notices something metallic or unusual in the air, it could be related to other factors (mold, dust, off-gassing from materials, moisture). That's worth investigating for its own reasons. Radon itself is not the cause of any sensory experience.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0030", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "\"Can I Feel It\" and Symptom Questions", "question": "I've been having headaches since we moved to our new home and the radon is 4.5 pCi/L. Is the radon causing headaches?", "answer": "Radon doesn't cause headaches. Its health mechanism is long-term lung tissue radiation exposure - not a neurotoxic or irritant effect. If you're having headaches in a new home, more likely factors include dryness, different allergens, new construction off-gassing, or stress from the move. Check CO levels as well - carbon monoxide can cause headaches and is worth ruling out. For the radon, 4.5 pCi/L is above the action level and worth mitigating for long-term lung health, but it's not the cause of your headaches.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0031", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "\"Can I Feel It\" and Symptom Questions", "question": "My husband smells something musty in the basement where the radon monitor reads 5.5 pCi/L. Is that the radon?", "answer": "Radon is odorless. The musty smell is almost certainly mold or moisture - common in basements at elevated levels. Mold is worth addressing for its own health reasons, independently of radon. The two issues (mold/moisture and radon) often coexist in basements but are caused by different factors and require different solutions. Get the radon mitigated and evaluate the mold situation separately.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0032", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Doctor and Medical Questions", "question": "My doctor asked me about radon exposure at my annual physical. What should I tell her?", "answer": "Tell her the truth: whether you've tested your home, what the level was if you know, and roughly how long you've lived there. If you haven't tested, say so - many people haven't, and it's not a source of shame. If your level has been elevated for a long period, your doctor may want to note it as part of your lung cancer risk history, particularly if you also smoke or smoked. The honest answer is always the right one.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0033", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Doctor and Medical Questions", "question": "My doctor ordered a low-dose CT scan for lung cancer screening. I'm worried radon may have caused this.", "answer": "Low-dose CT scans for lung cancer screening are recommended for people who meet specific criteria - primarily age and smoking history. The recommendation to get a scan is based on statistical risk factors, not a sign that you have lung cancer. If radon exposure is part of your history, mentioning it to your doctor is useful context. The scan is a screening tool, not a diagnosis. Trust your doctor's guidance on interpreting the results.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0034", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Doctor and Medical Questions", "question": "I've been living with radon at 5.0 pCi/L for 10 years. Should I talk to my doctor about it?", "answer": "Yes - mentioning your radon exposure history to your doctor is appropriate, especially if you're a smoker or former smoker. Your doctor may want to note it as part of your risk profile and discuss whether lung cancer screening is appropriate for you. Many doctors don't ask about radon proactively, so bringing it up yourself ensures the information is part of your medical record.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0035", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Doctor and Medical Questions", "question": "My oncologist asked if I'd been tested for radon. We hadn't. Should we test now and would the result tell us anything about the past?", "answer": "A current radon test tells you what levels are now - it doesn't tell you what they were years ago. If you haven't changed anything about the home (no new construction, same foundation), the current level is informative context. Yes, test - and share the result with your oncologist. If the current level is elevated, that's relevant medical history context even if you can't know the exact past level. Get tested and mitigate if elevated.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0036", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Pet Health Questions", "question": "My dog spends 8 hours a day in the basement. The radon is 4.8 pCi/L. Could it affect her?", "answer": "Radon is a known carcinogen in humans through lung tissue exposure. There's less research on radon's effect on pets specifically, but the same mechanism - radiation exposure to lung tissue from inhaled radon decay products - would apply to animals as well. Your dog breathing basement air at 4.8 pCi/L for many hours daily is a meaningful exposure. Mitigating the home benefits everyone in it, including your dog. Give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0037", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "Pet Health Questions", "question": "My cat is always in the basement. Is radon dangerous for cats?", "answer": "The biological mechanism of radon harm - lung tissue radiation exposure - applies to any mammal. There's limited formal research on radon and pets specifically, but cats and dogs living in high-radon basements are being exposed to the same gas in the same concentration. Mitigating the home is the appropriate step for the health of all occupants.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0038", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "\"Should We Move\" Questions", "question": "We just found out our radon is 8.0 pCi/L. My spouse wants to move. Is moving the answer?", "answer": "Moving is an option but not the most practical one for most families. Radon is fixable in place - a mitigation system is a one-day installation that can bring levels well below 4.0 pCi/L. Selling a home with documented elevated radon and no mitigation creates its own complications. A better path: mitigate, get a post-mitigation test showing low levels, and decide whether you want to stay in the home from that cleaner baseline. Give us a call so we can walk you through what mitigation would involve for your home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0039", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "\"Should We Move\" Questions", "question": "My radon is 9 pCi/L and I'm terrified. What should I do right now?", "answer": "Take a breath. 9 pCi/L is well above the EPA action level and worth addressing promptly - but it's not a same-day emergency that requires evacuating the home. Radon risk is cumulative over years, not acute. What to do: call a licensed radon mitigator to schedule an in-home evaluation. The installation is one day. The system starts working immediately. If you'd like to talk through what to expect, give us a call - we're here to help.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0040", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "Is radon more dangerous than other indoor air quality risks?", "answer": "Radon is the second leading cause of lung cancer in the US after smoking, and the leading cause among non-smokers. That puts it in a serious category - more dangerous than most other indoor air pollutants from a cancer risk standpoint. CO is immediately life-threatening at high levels, but radon's danger is slower and cumulative. Most indoor air quality issues are worth addressing; radon is specifically worth prioritizing because of its well-established, significant cancer risk.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0041", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon is 2.3 pCi/L. My neighbor says I'm overreacting by considering mitigation. Am I?", "answer": "No. The EPA says to consider mitigation at 2.0-4.0 pCi/L. Your neighbor isn't wrong that 2.3 is below the action level - but \"below the action level\" doesn't mean \"no concern.\" Whether mitigation makes sense at 2.3 depends on how much time your family spends in the basement, whether there are young children or smokers in the home, and how long you plan to stay. Those factors make the conversation with a mitigator worthwhile even at 2.3.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0042", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "I've been in excellent health and my doctor says I'm fine. But my radon is 4.8 pCi/L. Should I still do something?", "answer": "Yes. Being healthy now doesn't mean radon exposure isn't affecting risk over time. Radon's effect is cumulative - it's about lung cancer risk that develops over years, not current health status. The fact that your doctor says you're fine is great news that shouldn't be used as a reason to skip mitigation. Fix the radon and keep being healthy.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0043", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "Can radon cause health problems other than lung cancer?", "answer": "The established, primary health risk from radon is lung cancer. There is no widely accepted scientific evidence linking radon to other conditions (leukemia, kidney cancer, other organ cancers). Some research has explored other associations but these are not established the way lung cancer is. When talking to your doctor about radon, focus the conversation on lung cancer risk - that's where the clear science lives.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0044", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon is 4.3 pCi/L and I have asthma. Does radon make asthma worse?", "answer": "Radon itself doesn't trigger asthma - it doesn't cause airway inflammation or the immune responses associated with asthma attacks. Radon's harm is long-term cancer risk from radiation exposure, not an irritant effect. If your asthma symptoms are related to something in the basement, look at moisture, mold, dust, or air filtration. Mitigating radon is still worthwhile for your long-term lung health, but don't expect it to improve asthma symptoms directly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0045", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon is 3.5 pCi/L and my doctor told me not to worry. Should I trust that?", "answer": "Your doctor is likely reflecting the EPA guidance - at 3.5 pCi/L, you're below the action level, though in the \"consider mitigation\" range. \"Don't worry\" may mean \"this isn't a crisis\" rather than \"do nothing.\" If you want to discuss whether your specific situation (time in the basement, smoking history, children in the home) tips the balance toward mitigation, either talk further with your doctor or consult a licensed mitigator. The EPA guidance and your doctor aren't in conflict - but there's nuance worth exploring.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0046", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon is 5.0 pCi/L and I've been reading about radon online. Now I can't sleep. Is my house going to kill me?", "answer": "Reading about radon risk online can spiral into anxiety quickly - the statistics are real but they're population-level probabilities, not individual certainties. Many people have lived in homes with elevated radon and not developed lung cancer. The risk is real and worth addressing, but it's not an immediate life-threatening situation. The most productive thing you can do is schedule mitigation and then let the system work. Once it's installed and running and your monitor shows lower levels, you'll have done what you can. Give us a call and let's get it scheduled.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0047", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon is at 4.8 pCi/L and I have a family history of lung cancer. Should I be more worried?", "answer": "Family history of lung cancer - particularly in non-smokers - is a known risk factor that your doctor should know about regardless of radon. Combined with 4.8 pCi/L, it's worth discussing with your doctor and scheduling mitigation without delay. Reducing radon exposure is something within your control. Tell your doctor about both the family history and the radon level so they can factor it into any screening recommendations.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0048", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon is high. My husband says it's just background radiation and all radiation is everywhere. Is he downplaying the risk?", "answer": "Radon is a specific, measurable, and known carcinogen in residential settings. While it's true that all radiation isn't equally harmful and all radon exposure isn't instantly dangerous, the EPA action level exists because indoor radon at elevated concentrations is a meaningful lung cancer risk over years of exposure. Your husband's framing is too dismissive. The difference between 0.4 pCi/L and 6.0 pCi/L is real and significant in terms of lifetime risk. Mitigation addresses a real risk, not a phantom one.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0049", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon is 4.0 pCi/L exactly. The EPA action level is 4.0. Does that mean I'm exactly at the limit?", "answer": "4.0 pCi/L is the EPA's recommended action threshold - the point at which they recommend fixing the home. Being at exactly 4.0 isn't meaningfully different from being at 4.1 or 3.9 in terms of actual exposure. The action level is a practical guideline, not a bright line above which harm begins and below which all is fine. At 4.0 pCi/L, the recommendation is clear: fix it.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0050", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon is 3.0 pCi/L and I'm pregnant. Should I mitigate before the baby comes?", "answer": "The EPA says to consider mitigation at 2.0-4.0 pCi/L. Being pregnant doesn't change the radon risk mechanism (radon affects lung tissue, not fetal development directly), but it may change your personal motivation to act. If you were already considering mitigation at 3.0, pregnancy is a reasonable prompt to move forward. If there are young children or the baby will be in the basement regularly after birth, mitigating now is sensible. Give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0051", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "Can radon exposure affect fertility or reproductive health?", "answer": "Radon's established health risk is lung cancer from radiation exposure to lung tissue. There is no established link between residential radon exposure and fertility or reproductive harm. If you have specific concerns about fertility, those are best discussed with a reproductive health specialist - they're not related to radon. The reproductive-health concern about radon occasionally circulates online but isn't supported by established science in the way lung cancer risk is.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0052", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon is 5.5 pCi/L and a family friend (a doctor) says to open windows and it will be fine. Is that accurate?", "answer": "Opening windows does dilute radon - significantly, in some cases. But it's a management approach, not a solution. Once you close the windows in winter (which is most of the year in Illinois), radon returns. A doctor friend giving informal advice may not be aware of how radon re-accumulates in closed conditions. The durable, season-independent solution is sub-slab depressurization - a mitigation system. Give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0053", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon is 4.5 pCi/L and my sister says she'd be more worried about CO2 levels in my house. Is she right to prioritize CO2?", "answer": "CO2 levels in a home (from breath and combustion) don't typically reach the concentrations that would be a serious health concern in a normally ventilated home. Elevated CO (carbon monoxide) is a serious immediate danger - make sure you have working CO detectors. Radon at 4.5 pCi/L is above the EPA action level and is a well-established long-term carcinogen. Both are worth addressing, but radon at 4.5 pCi/L is the more actionable and serious risk in this comparison.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0054", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My father died of lung cancer. He was a non-smoker and his home had radon at 5.0 pCi/L for decades. Could radon have been the cause?", "answer": "Radon is the leading cause of lung cancer in non-smokers. It's impossible to know with certainty what caused any individual's cancer, but 5.0 pCi/L over decades in a non-smoker is consistent with radon as a contributing factor. The EPA acknowledges this risk explicitly. You can share this history with your own doctor as part of your personal risk context. For the home you're in now, make sure it's tested and mitigated if elevated.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0055", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "Is it worth spending money on mitigation if I'm only renting and plan to move in a year?", "answer": "That depends on the level and how much time you spend in the affected space. At 4.0+ pCi/L, the cost of mitigation falls on the landlord (or property owner) - as a tenant, you can request it be done rather than paying yourself. If the landlord won't act, that's a factor in your decision about whether to continue renting there. Radon exposure is cumulative - a year at an elevated level is a year of exposure. For your own health, advocate for mitigation through the landlord rather than accepting it because you're moving eventually.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0056", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "How long does it take for radon's cancer risk to go away after I move to a lower-radon environment?", "answer": "Radon exposure risk is cumulative - the exposure that has occurred has contributed to your lifetime risk, and that doesn't simply reverse. But the risk from future exposure stops when you're no longer in the elevated environment. Reducing radon in your current home (through mitigation) means you're not adding to your cumulative exposure going forward. The health benefit of mitigation is real and ongoing, even if past exposure can't be undone.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0057", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon is 4.8 pCi/L. Is there anything else I should do besides mitigate?", "answer": "Mitigate first - that's the primary and most impactful step. Beyond that: don't smoke (or if you do, this is a strong reason to quit), make sure you have working CO detectors and smoke alarms, and mention your radon history to your doctor if you have any concerns about lung health or if you have a smoking history. For the mitigation itself, give us a call and we'll walk through what's involved for your home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0058", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My husband thinks radon fears are overblown by the mitigation industry. Is that a fair critique?", "answer": "The radon health risk is not a creation of the mitigation industry - it's established by the EPA, the Surgeon General, and the WHO based on decades of epidemiological research, particularly from uranium miner studies. The action level of 4.0 pCi/L reflects a real risk profile, not industry advocacy. The mitigation industry exists because radon is a real problem, not the other way around.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0059", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "Can I reduce my radon risk with supplements, antioxidants, or diet?", "answer": "No established dietary or supplement intervention reduces lung cancer risk from radon specifically. The only effective approach to reducing radon risk at home is reducing radon concentration through mitigation. General healthy lifestyle habits (not smoking, regular screening for high-risk individuals, healthy weight) are good for overall cancer risk, but none substitute for mitigation when radon is elevated. Don't pursue dietary interventions as an alternative to fixing the radon.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0060", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon is 5.5 pCi/L. My doctor said \"that's high\" but gave no further guidance. What should I do?", "answer": "Get it mitigated. Your doctor acknowledged it's elevated, and the appropriate response is to call a licensed radon mitigator for an in-home evaluation and installation. Your doctor's role in this situation isn't to prescribe a fix - the fix is structural, not medical. The medical context is to note this in your health history and, if you're a smoker or former smoker, discuss lung cancer screening. On the radon side, give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0061", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My children are teenagers and I'm worried about radon in the basement where they spend all their time. What's the practical risk?", "answer": "Teenagers spending many hours daily in a basement at elevated radon represents meaningful cumulative exposure. At 4.0+ pCi/L, the EPA recommends acting. The teenage years are years of exposure that accumulate toward lifetime risk. The fix is straightforward - mitigation brings levels down and continues working. Don't let the years go by; act now while the kids are still in the home. Give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0062", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My radon went from 2.0 to 6.0 in one year. Can that happen?", "answer": "Yes - radon levels can change as homes age, as soil conditions change, as foundation cracks develop or sump conditions change, or after plumbing or construction work. A jump from 2.0 to 6.0 in a year is significant and suggests something may have changed in the home's entry pathways. This is worth professional attention - both to understand why it jumped and to address it with mitigation. Give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-health-family-worry-questions-recovered-0063", "phase": "phase3", "type": "answered_qna", "topic": "answered-health-family-worry-questions-recovered", "category": "answered-health-family-worry-questions-recovered", "subtopic": "General Health Context", "question": "My son's pediatrician asked me if our home has been tested for radon. We haven't. What should I say to the doctor and then do?", "answer": "Tell the pediatrician you haven't tested and will do so. Then go test - a professional short-term test (charcoal canister by a licensed tester) gives you a reliable result. If the level is at or above 4.0 pCi/L, schedule mitigation. You can tell the pediatrician the result at the next visit. Pediatricians are increasingly asking because children's cumulative exposure over their development years matters.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "answered-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0001", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "What is the difference between Airthings and RadonEye?", "answer": "The main difference is sensor technology. Airthings Wave-series devices use an alpha spectrometry chip, while RadonEye uses a pulsed ionization chamber. The ionization chamber approach in RadonEye tends to give faster readings - useful if you want early data. Airthings' sensor is well-validated and builds a reliable long-term picture. Both are reasonable choices for homeowner monitoring. For real estate or documentation needs, follow the testing process required for that situation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0002", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Is RadonEye more accurate than Airthings? (Monitor Comparisons - Expanded)", "answer": "Both can be accurate for homeowner monitoring when used correctly. RadonEye's pulsed ionization chamber technology is known for fast response and is used in some professional contexts. Airthings' alpha spectrometry approach is well-validated and has been compared to professional monitors in third-party studies. The difference matters less than placement, averaging period, and how you interpret the reading. If you're making a mitigation decision, follow the testing process required for your situation, and call or text Bill if the reading is elevated or confusing.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0003", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "What is the difference between a display monitor and an app-only monitor?", "answer": "A display monitor (like the Airthings View Radon or a SafetySiren) shows current readings on its own screen - no phone needed. An app-only monitor (like the Airthings Wave Radon) stores data internally and syncs to your phone when nearby. Display monitors are easier for users who don't want to manage an app. App-connected monitors give you trend graphs, history, and sometimes remote alerts. The sensor accuracy between these two categories isn't necessarily different - it's about how you prefer to read the data.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0004", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "What is the difference between Wi-Fi and Bluetooth radon monitors?", "answer": "A Bluetooth radon monitor syncs to your phone when the phone is in range - usually within 30-60 feet. A Wi-Fi monitor connects to your home network and can be checked remotely from anywhere. If you want to check radon levels while you're at work or traveling, Wi-Fi is more useful. If you only need to check occasionally when you're home, Bluetooth is usually fine. Some Airthings models use Bluetooth only; others (View series) add Wi-Fi or connect through a hub.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0005", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Airthings vs RadonEye - which should I buy for after mitigation monitoring?", "answer": "Either works well for post-mitigation monitoring. If you want to check levels remotely from outside the home, consider an Airthings View Radon or a Wi-Fi-connected option. If you want a display in the basement you can glance at, RadonEye's built-in screen is convenient. RadonEye's faster response can help you see changes more quickly after the system starts. For the official post-mitigation test, you'll still need a professional measurement - consumer monitors don't satisfy that requirement in Illinois.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0006", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Is Ecosense more accurate than Airthings?", "answer": "Ecosense uses an ionization chamber sensor, as does RadonEye. Airthings uses a different sensor approach (alpha spectrometry). Both have been evaluated against professional monitors. No consumer brand is officially rated \"more accurate\" than another in a universally recognized standard for home use. What matters most is proper placement, sufficient averaging time (at least 7 days for reliable data), and confirmation with a professional test when making decisions.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0007", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Which radon monitor is best for someone without a smartphone?", "answer": "The SafetySiren is specifically designed for people who don't use smartphones. It plugs into the wall, displays radon levels on its own screen, and sounds an audible alarm if levels rise. Some Airthings View models also have a built-in display but are designed to pair with Wi-Fi. RadonEye has its own built-in display. Any monitor with a built-in display can be used without a phone, though the app models give you historical data you'd miss without syncing.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0008", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Are US-made radon monitors more accurate than Norwegian or Korean ones?", "answer": "Monitor accuracy depends on the sensor technology, calibration, and testing methodology - not the country of origin. Airthings (Norwegian), RadonEye (South Korean), and Ecosense (US) all have reputable devices. Professional radon monitors used by licensed testers are also made in the US, but that's about their compliance with professional testing standards, not simply where they were manufactured.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0009", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Which radon monitor has the best alarm functionality?", "answer": "SafetySiren is known for its audible alarm. Several Airthings models can send push notifications to your phone when radon crosses a threshold you set. RadonEye also has alarm settings. If an audible in-home alarm matters - especially for someone who won't have a phone nearby - SafetySiren or similar standalone plug-in monitors are worth considering. App-based notification is only useful if you have the app and notifications enabled.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0010", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Is it worth buying two consumer monitors and comparing them?", "answer": "It can be useful if you're trying to monitor two areas (basement and first floor, for example) or want a sanity check on a reading. Two monitors in the same spot will sometimes give readings that differ by 20-30% - that's normal and within typical consumer monitor variability. If two monitors in the same room consistently give very different numbers, one may have a failing sensor. For most homeowners, one well-placed monitor is enough.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0011", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Can a consumer radon monitor replace a professional radon test? (Monitor Comparisons - Expanded)", "answer": "No - not for formal decisions. A professional test conducted by a licensed radon measurement professional under defined protocol is what's required for real estate transactions in Illinois, and it's the appropriate standard for a pre-mitigation baseline. A consumer monitor is ideal for ongoing post-mitigation tracking and year-round trend monitoring. Use professional testing when the decision matters; use a consumer monitor to stay informed between tests.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0012", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "What makes RadonEye faster at detecting radon?", "answer": "RadonEye uses a pulsed ionization chamber, which detects radon decay products with shorter counting intervals than some competing technologies. This allows it to update its displayed reading more frequently. It's genuinely useful for watching how radon responds to changing conditions. Keep in mind that even with faster response, the long-term average is what determines real exposure - a single fast reading doesn't give you the full picture of your home's radon level.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0013", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Which radon monitor works best without any internet connection at all?", "answer": "SafetySiren operates entirely standalone - no app, no internet, no phone required. RadonEye stores data on the device and displays a reading without internet. Airthings Wave models store readings locally and can sync when a phone is in range later, even without internet at the time of recording. If you have no smartphone and no internet, SafetySiren is the simplest option.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0014", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "What does NRPP or C-NRPP certification mean for a radon device?", "answer": "NRPP (National Radon Proficiency Program) and C-NRPP (Canadian equivalent) certify the people and companies performing radon measurements - not the devices themselves in the consumer market. Professional measurement devices used by licensed radon testers must meet specific requirements, but this certification program applies to the professional, not the Airthings or RadonEye you buy at retail. Consumer monitors aren't certified under NRPP for use in formal real estate tests.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0015", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Is one monitor enough for a whole house?", "answer": "For general monitoring, yes - place it in the lowest regularly occupied area (usually the basement) to track the highest-risk zone. If you also spend significant time on the main floor or in a first-floor room that's at or near grade, a second monitor there can give you a fuller picture. After mitigation, one monitor in the basement where the system is installed is typically sufficient for long-term tracking.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0016", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Which radon monitor is best for a crawlspace home?", "answer": "For a home with a crawlspace instead of a basement, test on the first floor in the lowest regularly occupied space. Place the monitor on the first floor, away from exterior walls and vents. You can also place a monitor near the crawlspace access opening to see levels in that area, though that reading won't represent the breathing zone upstairs. The key is understanding that radon from the crawlspace can still enter the living space above.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0017", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Which monitor has the longest warranty?", "answer": "Warranty terms vary by manufacturer and change over time - check the current manufacturer page for the specific model you're buying. Most consumer radon monitors carry a 1-2 year limited warranty. Warranty length should be a secondary factor; sensor quality, placement guidance, and app usability matter more for practical use.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0018", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Does temperature affect radon monitor accuracy?", "answer": "Temperature can affect electronic sensors, and most consumer monitors have an operating temperature range specified in their documentation. Extreme cold (below freezing) in an unheated garage or crawlspace can affect accuracy. Very high humidity can also affect some sensors. For normal basement conditions - even cold basements in winter - most consumer monitors operate within acceptable ranges. Check the manufacturer's spec sheet for your specific model.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0019", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Do professionals use Airthings or RadonEye to verify mitigation results?", "answer": "Some professionals do use consumer monitors like RadonEye as a quick field check, but this is not the same as a formal post-mitigation test. In Illinois, the post-mitigation test must be conducted by an independent licensed radon measurement professional using calibrated equipment. A RadonEye or Airthings reading after installation can give the installer a quick indication of whether the system is working - but it doesn't satisfy the state testing requirement.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0020", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "If I have both a RadonEye and an Airthings and they disagree, which one should I trust?", "answer": "Neither monitor is necessarily wrong when they disagree. Consumer monitors naturally vary due to differences in sensor technology, placement height differences (even a few inches matter), and sample timing. If both are in the same room and the disagreement is more than 30-40%, check placement and make sure both have been running long enough to have a meaningful average. If one monitor is new and one is older, the older one may have drifted. For a definitive answer, get a professional test.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0021", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Can I share my radon monitor data with my insurance company?", "answer": "Some insurance companies have started asking about radon or offering discounts for mitigated homes. What they accept varies by insurer. A consumer monitor reading is informal - a professional post-mitigation test report from a licensed tester carries more weight for any formal purpose. Check directly with your insurer what documentation they want.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0022", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Comparisons - Expanded", "question": "Does any consumer monitor meet AARST or NRPP testing standards for real estate?", "answer": "No consumer monitor currently meets the standards for conducting a formal real estate radon test that would satisfy licensing requirements. AARST and NRPP standards for real estate testing require professional-grade devices, calibration documentation, chain of custody, and a licensed professional conducting and interpreting the test. Consumer monitors serve a different, valuable purpose - ongoing monitoring - but they're not a substitute for a licensed test at the point of sale.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0023", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "What is the difference between the Airthings Wave Radon and the Wave Plus?", "answer": "The Wave Radon measures only radon. The Wave Plus adds CO2, VOC (volatile organic compounds), temperature, humidity, and atmospheric pressure. Both use the same Bluetooth connection and sync to the same Airthings app. If you primarily want radon monitoring, the Wave Radon is the focused option. The Wave Plus is useful if you want a broader indoor air quality picture from the same device.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0024", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Does the Airthings Wave Radon require Wi-Fi?", "answer": "No. The Wave Radon uses Bluetooth only. It stores readings internally and syncs to your phone when the phone comes within Bluetooth range. You don't need home Wi-Fi for it to work - just the Airthings app on your phone. If you want to check radon levels remotely (without being home), you'd need an Airthings Hub or a Wi-Fi-connected Airthings device.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0025", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "What is the Airthings Hub and do I need one? (Monitor App, Wi-Fi, Battery, and Setup - Expanded)", "answer": "The Airthings Hub connects to your home Wi-Fi and allows Bluetooth Airthings Wave devices to report data to the cloud without you needing to bring your phone near the device. This means you can check readings remotely from anywhere. You don't need a Hub for the device to work locally - but you do need it for remote access with Wave-series devices. View-series Airthings devices connect directly to Wi-Fi without needing a Hub.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0026", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "How do I set up the Airthings Corentium Home 2?", "answer": "The Corentium Home 2 doesn't require Wi-Fi or a smartphone to function. Install the batteries, let it run for 24 hours to begin calibrating, and it will display readings directly on its USB-connected interface. You can plug it into a computer to download data using Airthings' desktop software. For detailed setup steps, follow the current Airthings documentation at their support page or the quick start guide that comes in the box.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0027", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Can I use Airthings without creating an account?", "answer": "The Wave-series Airthings devices require the app to view historical data, and the app requires an account. The Corentium Home can display readings standalone without an account if you read it directly via USB and desktop software. Check Airthings' current account requirements on their website - these details can change with app updates.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0028", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "My Airthings app says the device is offline. What does that mean?", "answer": "If you have a Bluetooth-only device (Wave Radon, Wave Plus), it appears \"online\" in the app only when your phone is in Bluetooth range. If the phone hasn't been near the device recently, the app shows the last synced data and may show the device as offline. This is normal - the device is still recording internally. Bring your phone near the device to sync. If you have a Wi-Fi-connected device or Hub, an \"offline\" message may mean the Hub lost its internet connection.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0029", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Can I use Airthings without a smartphone?", "answer": "The Corentium Home models can be used without a smartphone - they display readings on a built-in display or via USB/desktop software. The Wave-series devices technically work without a phone (they record internally), but you can't view the data without the app. For smartphone-free use, the View Radon (which has its own display) or a non-app monitor like SafetySiren are better fits.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0030", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "How long do Airthings Wave Radon batteries last?", "answer": "Battery life varies depending on how often the device syncs with your phone. Airthings generally estimates the Wave Radon battery lasts around 12-16 months under typical use, but this is approximate and depends on sync frequency and battery brand. When the battery is low, the app will notify you. Use quality AA batteries - cheap batteries can shorten life significantly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0031", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Can I plug in the Airthings Wave instead of using batteries?", "answer": "The Airthings Wave Radon and Wave Plus are designed to run on batteries only. There is no official power adapter port for these models. The Airthings View Radon plugs into a USB-C power supply. Check the specific model you own - the product line has expanded and power options differ by model.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0032", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Does Airthings store data when the batteries die?", "answer": "The device stops recording when power is lost. When you replace the batteries, most models resume from a fresh start rather than recovering prior data. Historical data synced to the app before the batteries died is preserved in the cloud. Check Airthings' current documentation for the specific behavior of your model, as this has varied between firmware versions.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0033", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "How do I set up radon alerts in the Airthings app?", "answer": "Open the Airthings app, select your device, and look for notification or alert settings. You can typically set a threshold (such as 4.0 pCi/L) and the app will send a push notification if your reading crosses it. Make sure notifications are enabled both in the Airthings app and in your phone's notification settings. Alert delivery also requires the device to sync data to the app, which for Bluetooth devices means your phone needs to be in range periodically.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0034", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Can Airthings notify family members about my radon level?", "answer": "Airthings allows you to share device access with other accounts. Family members can add your device to their Airthings app and view the same readings. Whether they receive alerts depends on their notification settings. This is useful for adult children checking on an elderly parent's home, for example.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0035", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Does Airthings work with Google Home or Alexa?", "answer": "Airthings has offered integrations with Google Home and Amazon Alexa in some versions of their platform. Integration availability can change with app updates. Check the current Airthings integrations page or the Google Home/Alexa skill store for current status. Voice assistant integrations typically let you ask for the current radon level verbally.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0036", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Can Alexa or Google tell me my radon level?", "answer": "If your Airthings device is connected to your account and you have the Airthings skill or integration active in Alexa or Google Home, you can ask for the current reading. This requires a Wi-Fi-connected Airthings device or Hub so data is available in the cloud. The availability and accuracy of these integrations can change - check Airthings' current documentation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0037", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "What is the Airthings View Radon? (Monitor App, Wi-Fi, Battery, and Setup - Expanded)", "answer": "The Airthings View Radon is a radon monitor with a built-in color display that shows current readings without needing a phone. It connects to your home Wi-Fi directly (no Hub required) and allows remote access through the app. It's a good choice if you want a display in the basement and the ability to check from anywhere.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0038", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "What is the Airthings View Plus?", "answer": "The View Plus is similar to the View Radon but adds additional sensors (CO2, VOC, temperature, humidity, light, noise in some versions). It's Airthings' most comprehensive home air quality monitor. If you want radon plus a broader air quality picture on one screen, the View Plus covers both.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0039", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "My Airthings device keeps disconnecting from the app. What's wrong?", "answer": "For Bluetooth devices, disconnection is normal when your phone moves out of range - the device is just not syncing, but still recording. If your phone is nearby and still not syncing, try: restarting the app, toggling Bluetooth off and on, ensuring the device has enough battery, and checking for app updates. For Wi-Fi devices, check your router connection and that the device is within Wi-Fi range.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0040", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "How long does Airthings keep historical data? (Monitor App, Wi-Fi, Battery, and Setup - Expanded)", "answer": "Airthings stores historical data in the cloud for accounts with an active subscription or within the free tier's limits. The specific retention period for the free tier is something to verify on Airthings' current pricing page - these terms can change. Data synced to the device internally before a battery failure is typically not recoverable. For long-term tracking, sync frequently and check whether your account tier retains full history.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0041", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Can I export my Airthings radon data?", "answer": "Yes - Airthings allows data export from the app or dashboard. The format is typically a CSV file with time-stamped readings. This is useful if you want to create your own graphs, share data with a professional, or keep your own records. Check the Airthings app or dashboard for the current export option location.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0042", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Does the Airthings Wave work if I don't have a smartphone?", "answer": "The Wave Radon and Wave Plus work without a smartphone in the sense that they record data internally. But you can't view that data without the app. If you don't use a smartphone, consider the Airthings View Radon (built-in display) or a monitor like SafetySiren that doesn't require any connected device.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0043", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "My Airthings shows 0.0 pCi/L. Is that possible?", "answer": "A reading at or near zero is possible in some homes, especially with good ventilation or an active mitigation system. It can also indicate a sensor issue, particularly if the device is brand new and still calibrating (the first 24-48 hours are often not representative). If the device has been running for several days and consistently shows 0.0, check placement and consider whether it may need support from Airthings.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0044", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "How do I set up the Ecosense EcoQube?", "answer": "Setup instructions vary by model - consult the current Ecosense documentation that comes with the device or is available on their website. Generally, you install batteries or plug in the device, download the Ecosense app, pair via Bluetooth, and allow 24 hours for initial calibration. Specific steps for the EcoQube Flex vs the standard EcoQube differ - use the guide specific to your model.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0045", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "What is the Ecosense EcoBlu?", "answer": "The EcoBlu is an Ecosense product designed for professional and real estate testing contexts, offering faster and more precise readings than typical consumer models. It's positioned between consumer monitors and full professional continuous radon monitors (CRMs). If you've seen this referenced by an inspector or professional, it may be what they're using rather than the consumer EcoQube.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0046", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Does the RadonEye Plus have an app?", "answer": "RadonEye Plus models (such as RD200+ variants) support a companion app that displays readings on your phone and may allow data logging and export. The original RD200 also connects via Bluetooth to a phone for data viewing. App features and availability can change - check the current RadonEye app page for your model. Some users find RadonEye's app simpler than Airthings'; others prefer the Airthings ecosystem.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0047", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Can I use the RadonEye without its app?", "answer": "Yes - the RadonEye has a built-in display that shows the current reading without needing a phone or app. The display is one of RadonEye's advantages for users who want a glanceable reading in the basement without pulling out a phone. The app adds historical graphs and data export functionality.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0048", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "What batteries does the RadonEye use?", "answer": "RadonEye models use different battery types depending on the version. Most common is 3 AA batteries. Check the documentation for your specific model. Battery life varies by model and usage - consult the manufacturer's current spec sheet for expected duration.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0049", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Can the RadonEye be plugged into wall power?", "answer": "Some RadonEye models support AC power through a USB connection or adapter. Check the specific model documentation. Not all RadonEye versions support continuous wall power, and using the wrong power method can void warranty. For permanent basement monitoring, some users leave the RadonEye on a USB power bank to avoid battery swaps.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0050", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "How do I interpret the RadonEye display?", "answer": "The RadonEye display typically shows the current (short-term) reading and may also show a longer-term average. The reading is in pCi/L. The current reading updates frequently - the pulsed ionization chamber allows faster updates than many competing monitors. A single high reading on the display doesn't necessarily mean your home has a permanent problem - look at the trend over days and weeks for meaningful data.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0051", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Does the RadonEye alarm if radon is high?", "answer": "Yes - RadonEye has an alarm function that activates when radon exceeds a threshold. The exact threshold and alarm behavior vary by model. Some models allow you to set the threshold in the app; others use a fixed default. Consult the current RadonEye documentation for your specific model for alarm configuration.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0052", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "What is SafetySiren and who makes it?", "answer": "SafetySiren is a brand of standalone plug-in radon detector made by Family Safety Products. It's designed to be simple - plug it in, let it warm up and calibrate, and it will display readings and alarm audibly if radon is elevated. There is no app. This makes it well-suited for people who want a simple, dedicated radon detector without technology complexity.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0053", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "Does SafetySiren have a battery backup?", "answer": "Some SafetySiren models include a battery backup for continued operation during a power outage. This is noted as a feature of higher-end Pro models. Verify the current model's features on the manufacturer's page - not all SafetySiren versions include battery backup.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0054", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup - Expanded", "question": "My SafetySiren is alarming. What do I do?", "answer": "If your SafetySiren is alarming, first note what it's displaying - the reading will tell you how elevated the radon is. Open some windows temporarily to see if the reading drops (this confirms the sensor is responding to actual radon, not a false trigger). If the alarm continues at elevated levels after a day of normal conditions, call or text Bill or fill out the form on our website so we can help you understand what the reading means and whether mitigation makes sense.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0055", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "My Ecosense EcoQube reading dropped sharply overnight. Is that accurate?", "answer": "Sharp overnight drops can happen - particularly if ventilation changed, a door was left open, or outdoor conditions shifted barometric pressure significantly. One night's drop in isolation is less meaningful than the multi-day trend. If your Ecosense has been running for a week or more and shows a consistent average well below 4.0 pCi/L, a single overnight low doesn't change that picture. If you see unpredictable swings that don't seem tied to anything, let the device run another 7-14 days and look at the overall trend.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0056", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "My Ecosense app shows a \"Good\" air quality status at 3.9 pCi/L. Does that mean I don't need to do anything?", "answer": "\"Good\" in the app's color-coded system reflects their internal threshold display - it doesn't mean the EPA would say no action is warranted. The EPA says to consider mitigation between 2.0 and 4.0 pCi/L, particularly with consistent readings in that range and factors like young children, frequent basement use, or smokers in the home. If you're consistently at 3.9 and you spend meaningful time in that space, it's worth a conversation. Call or text Bill and we can help you think through whether mitigation makes sense for your situation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0057", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "My Airthings short-term average is 5.5 pCi/L but the long-term average is 2.8 pCi/L. Which matters more?", "answer": "The long-term average is more meaningful for understanding your real radon exposure. Short-term averages (24 hours or 7 days) can fluctuate significantly based on weather, pressure, and ventilation. A long-term average built over 30-90 days represents what you're actually breathing over time. If your long-term average is 2.8 and your recent short-term spiked, that spike is worth watching - but it doesn't override 30+ days of data showing 2.8.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0058", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "My Airthings reading was fine for 6 months and then jumped last week. What changed?", "answer": "Sudden changes after months of stability are worth paying attention to. Common causes: a window or door being left open differently, HVAC changes (fan speed, filters, new ducts), foundation changes (new cracks, settling after dry or wet seasons), or a change in how much time the space is occupied. If it jumped and stayed high for more than a week without an obvious explanation, that's worth investigating. Give us a call if you'd like help thinking through what might have changed.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0059", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "My Airthings reading went up when I installed a new sump pump. Is that connected?", "answer": "Possibly. Sump pits are a common radon entry point. If your new sump pump disturbed soil or left an unsealed pit opening, it could allow more radon to enter. Make sure the sump pit lid is sealed - gaskets and sealed covers are a common first step before full mitigation. If the reading stays elevated, that may confirm the sump pit is a significant entry point and a mitigation system would address it directly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0060", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "My Ecosense EcoQube shows different readings at different times of day. Is that normal?", "answer": "Yes - radon levels naturally vary throughout the day and night. Common patterns include lower readings during the day when doors and windows may be open more, and higher readings at night or early morning when the house is closed and barometric pressure is lowest. This is expected behavior, not a device fault. The long-term average from your Ecosense is more useful than any single time-of-day reading.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0061", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "My Airthings reading has been exactly the same for 3 days. Is it frozen?", "answer": "If the reading has been literally identical down to the decimal for multiple days, the device may have lost connectivity or experienced a glitch. Try syncing your phone with the device, check for app updates, and verify the device has power. In some cases, very stable conditions can produce very stable readings - but three days of exactly identical numbers is worth investigating. Restart the device if it allows it, or contact Airthings support.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0062", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "My Airthings data disappeared. Where did it go?", "answer": "If you've logged out of your Airthings account or the device was reset, local and cloud history may appear missing. Try logging back in on a different device to see if cloud data is still there. If the device's batteries died, readings stored only on the device (not yet synced) may be lost. Contact Airthings support if you believe data should be in your account but isn't showing up.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0063", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "I ran my whole-house fan for a day and my Airthings dropped significantly. Does that mean the fan fixes the problem?", "answer": "A whole-house fan creates significant negative pressure and draws air through the house - that can temporarily dilute radon by pulling in outside air. But this doesn't address the source. When the fan isn't running, radon levels typically return. A mitigation system works differently: it creates sub-slab depressurization that redirects soil gases away before they enter the house. Ventilation is a temporary measure; mitigation is a lasting solution. If you want to test this further, let the reading return to baseline after stopping the fan and compare.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0064", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "My Airthings is in the basement at 3.5 pCi/L and my neighbor's house shows 1.0. We live next door. How can there be that much difference?", "answer": "Radon variability between neighboring homes is completely normal - in fact, it's expected. Radon levels depend on the specific geology under each home, the foundation type, the number and size of cracks or openings in the foundation, sump pit conditions, and how air moves through each house. Two identical houses on the same block can have very different radon levels. Your 3.5 pCi/L is specific to your home and your situation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0065", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "My Ecosense reading is different from a charcoal test I mailed to a lab. Which is right?", "answer": "Both can be accurate but measure slightly differently. A charcoal canister test captures an average over its test period (typically 48-96 hours) under closed-building conditions with specific protocol requirements. Your Ecosense continuously monitors under real-world conditions. Differences are expected - particularly if the charcoal test was done with closed windows that you don't normally maintain, or if conditions were different on those days. If both are in the same general range (within 30-40%), they're telling a consistent story. If they differ dramatically, a professional test with full protocol documentation will give you the most defensible number.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0066", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "After my radon mitigation system was installed, my Airthings jumped briefly before dropping. What happened?", "answer": "This is actually fairly common. When installers cut into the slab to create the sub-slab suction point, they may temporarily stir up soil gases. Radon can briefly increase before the fan establishes suction and begins depressurizing below the slab. Within 24-48 hours, the system should begin pulling radon down and your monitor should start dropping. If levels remain elevated after 48-72 hours, contact your installer.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0067", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "My Airthings long-term average just hit 4.0 pCi/L for the first time. What should I do now?", "answer": "At 4.0 pCi/L, the EPA recommends fixing the home. This isn't a panic situation, but it's time to act. The good news is mitigation is straightforward. Give us a call or fill out the form on the website and we can walk you through what's involved - it's typically a one-day installation and the system runs continuously after that.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0068", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Readings and Spikes - Expanded", "question": "My Airthings shows a different reading from morning to night. Should I use the morning or evening reading?", "answer": "Neither single reading is more correct than the other. Radon naturally varies throughout the day - often lower in the afternoon (more activity, more air exchange) and higher in the early morning (house closed overnight, low pressure). This is why the long-term average, not a point-in-time reading, is what you should use when deciding whether to mitigate. Let the device run for at least 30 days and watch the long-term trend.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0069", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "I have a crawlspace under my first floor. Where do I put the radon monitor?", "answer": "For a home with a crawlspace and no basement, test on the first floor - the lowest occupied level of the home. Place the monitor in the most-used room on the first floor, at breathing-zone height (around 3-5 feet off the floor), away from exterior walls and vents. The crawlspace itself is not where you'd normally place a monitor for living-space measurement. If you want to understand whether the crawlspace is a radon source, a professional can assess that as part of a mitigation evaluation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0070", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "Can I put a radon monitor inside a sealed crawlspace?", "answer": "Technically yes, but for understanding your living-area radon exposure, that reading won't directly represent what you're breathing. Crawlspace radon concentrations can be very high but vary depending on ventilation - measuring there tells you about the source, not your personal exposure. For personal exposure, measure in the occupied first-floor rooms. For a mitigation assessment, a professional will evaluate the crawlspace directly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0071", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "My house is on a slab. Does radon still get in?", "answer": "Yes. Radon can enter through cracks in the slab, expansion joints, pipe penetrations, and any opening between the soil and the interior. Slab homes often have different radon dynamics than basement homes but they're not inherently lower risk. The way to know is to test. Place a monitor on the first floor (the lowest occupied level) in a regularly used room.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0072", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "Where do I put a radon monitor in a ranch house with no basement?", "answer": "On the first and only floor, in the lowest regularly used room - often a main living area or bedroom. Avoid kitchens, bathrooms, and rooms near exterior doors that are frequently opened. The breathing zone (3-5 feet off the floor) is the target placement height.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0073", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "Where do I test in a split-level home?", "answer": "Test on the lowest occupied level - typically the lowest split-level floor that contains a bedroom or living area. In many split-level homes this is a lower family room or bedroom level that's partially below grade. If the lowest level is only storage or utility space that nobody occupies, test the next lowest occupied level.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0074", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "Can I put a radon monitor in a finished basement with carpet?", "answer": "Yes. Carpet doesn't affect monitor accuracy in any meaningful way. Place the monitor on a shelf, table, or furniture surface at breathing-zone height (roughly 3-5 feet off the floor). Don't place it on the floor itself regardless of the surface type - floor-level readings don't represent the breathing zone.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0075", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "My basement has a drop ceiling. Should the monitor be above or below the tiles?", "answer": "Below the tiles, in the living space. The drop ceiling creates a different air volume above it - measurements there don't represent the air in the occupied room below. Place the monitor at breathing-zone height in the occupied basement space.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0076", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "Can I put a radon monitor in a laundry room?", "answer": "A laundry room in the basement is generally not the best placement unless it's the only accessible basement area. Dryers exhaust air and washers can increase humidity - both can temporarily affect readings. If the laundry room is the main basement space, it's usable; just keep the monitor away from the dryer vent. A general living area or spare room in the basement is a more representative placement if available.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0077", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "My basement has a sump pit with a cracked plastic lid. Could that affect my monitor reading?", "answer": "Yes - an unsealed or cracked sump pit lid is a common radon entry point. The sump pit connects to soil below the slab, and if it's not sealed, soil gases (including radon) can enter directly through it. It's worth sealing the lid properly regardless of your radon level. If your reading is elevated, the sump pit is one of the first things worth addressing.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0078", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "Where should I put the monitor in an unfinished basement with exposed pipes and ductwork?", "answer": "Choose a spot away from the HVAC equipment, sump pit, and floor drains. A clear wall at breathing-zone height in an area where air circulates freely is the goal. Don't place it directly next to a large air handler or next to where the furnace exhausts. The center of the basement space, at about 3-5 feet off the floor, is generally a good starting point.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0079", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "I have two basements - a finished part and a mechanical room. Do I need to test both?", "answer": "One monitor in the finished, occupied area is the priority - that's where people spend time. If you're curious about the mechanical room, you can place the monitor there briefly, but the finished living area is what matters for exposure purposes. If you're doing a formal test for real estate or mitigation planning, test in the finished area.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0080", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "My basement has a walkout door on one side. Does that side have lower radon?", "answer": "Possibly - a walkout side with more above-grade exposure may have somewhat better natural ventilation. But radon entry is primarily through the floor and foundation walls, and it can enter equally on all sides. Don't assume the walkout side is lower without testing. Radon distributes through the basement air and averages out across the space.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0081", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "Can I move my radon monitor to different rooms to get different readings?", "answer": "You can, but wait at least 7 days after moving it before trusting the new location's reading - it takes time to establish a meaningful average in a new location. Moving it frequently will give you short-term snapshots that aren't as reliable as letting it run in one spot. If you want to understand multiple rooms, consider a second monitor rather than constantly relocating one.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0082", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "I have a finished basement with a home office. Where should the monitor be relative to my desk?", "answer": "Somewhere in the room at breathing-zone height - near your desk is fine. You want it in the area where you spend the most time. Don't put it directly on the desk under your monitor if there's airflow from equipment; a nearby shelf or side table is better. The goal is to measure what you're breathing during the hours you're working there.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0083", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "My teenager's bedroom is in the basement. Should the monitor be in their room or in the common basement area?", "answer": "If your teenager spends significant hours in that bedroom, that room is the most important spot to measure. They're breathing that air while sleeping - often 8+ hours a night. Place the monitor in their bedroom at breathing-zone height away from windows and exterior walls.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0084", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "I run a home daycare in my basement. Where should the radon monitor go?", "answer": "Place it in the main area where children spend their time - at breathing-zone height for an adult (3-5 feet), which will still be representative of the children's breathing zone, though children breathe closer to the floor. If the reading is at or above 2.0 pCi/L in a space where young children spend many hours weekly, that's worth taking seriously. Children breathe more air relative to their body size than adults, so their exposure per pCi/L is proportionally higher.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0085", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "My basement floods occasionally. Does that affect where I put the monitor?", "answer": "Keep the monitor elevated enough that it won't be submerged if the basement floods. After a flooding event, radon readings may change - water saturating the soil changes how gases move through it. Let things dry out and stabilize before relying on post-flood readings as your baseline. If you're dealing with recurring water intrusion along with elevated radon, a mitigation system addresses both issues in different ways - it's worth a call to discuss your situation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0086", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "I have a finished basement with multiple rooms - a family room, a guest room, and a storage room. Is one monitor enough?", "answer": "One monitor in the most-used area (usually the family room or the bedroom if someone sleeps there) is typically enough to understand your exposure. If you want a complete picture, a second monitor in the guest bedroom adds useful data. The storage room doesn't need monitoring unless someone spends meaningful time there.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0087", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "Can I put a radon monitor in my detached garage?", "answer": "A detached garage is not a typical testing location because it's not an occupied living space. If your garage is attached to the house and has interior access, you might want to test whether radon from the garage area affects living spaces - but the better measurement is still inside the house, in the lowest occupied room. A garage with no habitable connection to the house doesn't need a consumer radon monitor.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0088", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Monitor Placement - Expanded", "question": "My basement has a wood stove. Does that affect where I put the monitor?", "answer": "Yes - keep the monitor away from the wood stove. Combustion affects air chemistry and can pull outside air into the basement when the stove is running. Place the monitor at the opposite side of the basement from the stove, away from the chimney or stovepipe, and at breathing-zone height.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0089", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "How long should my consumer monitor run before I trust the post-mitigation reading?", "answer": "At least 7 days after the fan has been continuously running, and ideally 30 days for a stable long-term average. The first 24-48 hours after installation can be misleading as the system establishes sub-slab pressure equilibrium. By day 7, you should see a clear downward trend if the system is working. Your official Illinois post-mitigation test (by a licensed professional) should be conducted according to state timing requirements - not just when your consumer monitor looks good.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0090", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "My monitor went UP the first day after the mitigation system was installed. Is that normal?", "answer": "Yes, this happens. The installation process involves cutting into the slab and possibly disturbing subslab soil, which can temporarily release concentrated soil gas. Once the fan establishes suction and pulls the pressure below the slab negative, radon entry should be reduced and the consumer monitor should begin showing a decline within 24-72 hours. Contact your installer if the reading doesn't begin declining after 72 hours.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0091", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "My post-mitigation reading is 2.5 pCi/L on my consumer monitor. Is the system underperforming?", "answer": "Not necessarily. Post-mitigation results vary significantly by home. Some homes drop to 0.5 or below; others settle around 1.5-2.5. A result at 2.5 pCi/L is below the EPA action level of 4.0 pCi/L - that's a meaningful improvement if you started higher. If you started at 4.0 and ended at 2.5, the system worked. If you started at 10 pCi/L and are at 2.5, that's an excellent result. The professional post-mitigation test will give you the documented number.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0092", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "Do seasonal swings affect post-mitigation readings?", "answer": "Yes - even homes with mitigation systems see some seasonal variation. Winter typically brings slightly higher readings because homes are sealed tightly. The system actively counteracts this, but some variation is normal. Your annual professional re-test will capture a snapshot; a continuous consumer monitor lets you see the seasonal pattern over time.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0093", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "My mitigation fan is getting louder. Does that mean it's working harder or failing?", "answer": "A change in fan noise can be a sign of fan wear. Radon fans have a service life, typically 10-20 years depending on the model and conditions. A louder fan isn't necessarily failing immediately, but it's worth having checked - particularly if the noise change is accompanied by a rise in your consumer monitor reading. Call us if you notice both a noise change and a reading increase.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0094", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "I have two consumer monitors in my basement post-mitigation and they give different readings. Which one is correct?", "answer": "Two monitors in the same room can legitimately differ by 20-30% - this is within normal consumer monitor variability. If the difference is larger (one says 0.5 pCi/L, the other says 2.5 pCi/L), check whether they're in the same location, at the same height, and whether one may have a failing sensor. Average the two readings as a rough guide, and get a professional test for the definitive number.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0095", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "My mitigation system has been running 5 years. Do I need a professional retest?", "answer": "The EPA recommends retesting every 2 years after mitigation. Five years is overdue for a professional retest. Your consumer monitor may show a good reading, but professional documentation is valuable - particularly if you ever sell the home. Give us a call if you'd like help arranging a post-mitigation retest.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0096", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "Does my radon system warranty cover a new professional test if radon comes back?", "answer": "Warranty terms vary by contractor. Most mitigation warranties cover the installed system itself (fan, piping, workmanship) but don't necessarily include re-testing costs. Ask your original installer what their warranty covers. If you're working with us, we can clarify what our warranty terms include. Give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0097", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "My consumer monitor says 0.4 pCi/L post-mitigation. Do I still need the professional test?", "answer": "Yes - in Illinois, the post-mitigation test must be conducted by an independent licensed radon measurement professional. Your consumer monitor reading at 0.4 pCi/L is a good sign that the system is working well, but it doesn't satisfy the state's documentation requirement. The professional test provides a written report you can keep on file and reference if you sell the home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0098", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "My mitigation system was installed 3 years ago. I never did the post-mitigation professional test. Is it too late?", "answer": "It's never too late to get a post-mitigation test, and I'd encourage you to get one. A current professional test gives you documented confirmation of what your system is doing today. After 3 years, conditions may have changed slightly (fan wear, seasonal settling, foundation changes). A current professional test is worth having. Give us a call and we can help you arrange one.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0099", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "My Airthings dropped from 6.0 to 0.9 pCi/L after mitigation. Is that real?", "answer": "That's a very plausible result for a successful mitigation installation. Radon can drop quickly once sub-slab depressurization is established - sometimes within 24-48 hours. 0.9 pCi/L is well below the EPA action level and represents a strong outcome. Confirm this with the professional post-mitigation test, which gives you the documented result for your records.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0100", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "My manometer gauge shows almost no difference. Is my fan working?", "answer": "A manometer (also called a U-tube gauge) shows the pressure difference the fan is creating between the suction pipe and indoor air. If both sides are nearly equal, the fan may not be pulling adequate suction - or the gauge may not be reading correctly. Check that both ends of the gauge are properly connected. If the gauge is flat and your consumer monitor reading has risen, contact your installer - the fan may have failed or the suction point may be obstructed.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0101", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "Can I test in my house while the mitigation system is still new?", "answer": "You can - your consumer monitor provides ongoing information. But for the official Illinois post-mitigation test, follow your installer's guidance on timing. Testing too early (before the system has had time to establish consistent suction) may not represent steady-state performance. Most guidelines suggest waiting 24-30 days minimum before the professional post-mitigation test.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0102", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "I bought a house with a mitigation system already installed. There's no post-mitigation test report. What do I need?", "answer": "Get a current professional test conducted by a licensed measurement professional. This gives you a documented baseline and confirms whether the existing system is currently working. Contact the original installer if possible to get any documentation they have. If you don't know who installed it, a professional tester can assess the system's current condition as part of a full evaluation. Give us a call if you'd like help with this.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0103", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "After-Mitigation - Expanded", "question": "I've been using a consumer monitor for 6 months post-mitigation and it consistently shows 1.1 pCi/L. Do I need a professional retest?", "answer": "If it's been within 2 years of installation and you're within the state's timing requirements, you should get the official professional test to document your result. Your consistent 1.1 pCi/L is a strong sign the system is working well, which should be confirmed with professional documentation. After that, the EPA recommends re-testing every 2 years.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0104", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "SafetySiren Questions - Answered", "question": "What is SafetySiren and who is it best for?", "answer": "SafetySiren is a standalone plug-in radon detector that doesn't require a smartphone, app, or Wi-Fi connection. It has a built-in display and sounds an audible alarm if radon rises above an elevated threshold. It's particularly well-suited for people who want a simple, dedicated device they can plug in and monitor without managing an app - elderly homeowners, vacation homes, or anyone who wants a no-tech radon indicator in their basement.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0105", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "SafetySiren Questions - Answered", "question": "Does SafetySiren have a smartphone app?", "answer": "No. SafetySiren is specifically designed without an app or internet connection. It operates as a standalone device. This is its primary advantage for users who don't want app complexity, and its primary limitation for users who want remote access or historical graphs.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0106", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "SafetySiren Questions - Answered", "question": "My SafetySiren is beeping. What does that mean?", "answer": "A SafetySiren alarm indicates that radon has risen above the device's alert threshold. The reading on the display will tell you the current level. Open windows temporarily to see if the reading drops - this can confirm the sensor is responding to actual radon. If the reading is elevated and returns when the windows are closed, that's a sign your home may need a professional mitigation evaluation. Give us a call and we can help you understand the numbers.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0107", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "SafetySiren Questions - Answered", "question": "Can I use SafetySiren in a basement with no Wi-Fi?", "answer": "Yes - this is actually one of SafetySiren's design advantages. It requires only a standard 120V wall outlet. No internet connection, no router, no smartphone needed.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0108", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "SafetySiren Questions - Answered", "question": "Is SafetySiren accurate compared to other consumer monitors?", "answer": "SafetySiren uses continuous electronic sensing and has been around as a product category for many years. Like any consumer monitor, accuracy depends on proper placement and allowing adequate time for reliable readings. It's a reasonable consumer indicator, not a professional measurement device, but it serves well for ongoing home monitoring.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0110", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "SafetySiren Questions - Answered", "question": "How long does it take for SafetySiren to give a reliable reading?", "answer": "Like most consumer monitors, SafetySiren should be allowed to run for at least 24-48 hours before the reading stabilizes. The manufacturer's guidance is to allow a longer settling period (sometimes several days) before trusting the displayed reading as representative. Radon levels also naturally fluctuate, so a 7-day-plus average is more informative than a reading from the first day.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0111", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "SafetySiren Questions - Answered", "question": "Is SafetySiren recommended for post-mitigation monitoring?", "answer": "It can be used for post-mitigation monitoring, though it doesn't provide the historical graphs and trend data that app-based monitors offer. If you want to simply glance at a display and see whether your post-mitigation level looks good, SafetySiren is fine. If you want to see the trend over time and compare seasonal variation, an app-connected monitor gives you more useful data.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0112", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "SafetySiren Questions - Answered", "question": "SafetySiren vs Airthings - which should I buy?", "answer": "SafetySiren is better for: no smartphone users, simple installations, audible alarm priority.\nAirthings is better for: historical data, app-based monitoring, remote access, trend graphs, multi-sensor options.\nBoth measure radon continuously. The right choice depends on how you want to interact with the data.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0113", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "SafetySiren Questions - Answered", "question": "My SafetySiren is several years old. Is it still accurate?", "answer": "Consumer monitors can drift over time, and SafetySiren is no exception. If your device is 5+ years old and you're making a decision based on a reading, consider confirming with a professional test or comparing against a newer device. If the reading seems implausibly low or hasn't changed in months, the sensor may have degraded.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0114", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "What is the RadonEye RD200? (RadonEye - Answered)", "answer": "The RadonEye RD200 is a consumer radon monitor made by FTLab (South Korea) that uses a pulsed ionization chamber sensor. It has a built-in display and connects to a companion phone app via Bluetooth. It's known for faster reading updates than many competing consumer monitors, making it popular with homeowners who want more responsive data. It's a reasonable consumer device for ongoing monitoring.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0115", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "How does RadonEye differ from the Airthings Wave?", "answer": "The key difference is sensor technology. RadonEye uses a pulsed ionization chamber; Airthings Wave uses alpha spectrometry. The ionization chamber approach can update readings more frequently. Airthings Wave is Bluetooth-only with no display; RadonEye has a built-in display and Bluetooth app. Both are reasonable consumer monitors. RadonEye tends to be preferred by users who want fast feedback; Airthings tends to be preferred for its ecosystem, long-term history, and app quality.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0116", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "Is RadonEye used by professional radon testers?", "answer": "Some professionals keep a RadonEye for quick field assessments, but it's not a professional-grade continuous radon monitor (CRM) in the AARST/NRPP sense. Professional radon tests for real estate use devices that meet specific calibration, chain-of-custody, and documentation requirements that consumer monitors including RadonEye don't fulfill. A RadonEye reading at inspection is informative but not a substitute for a formal licensed measurement.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0117", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "My inspector brought a RadonEye and said the house is fine at 3.9 pCi/L. Should I trust that result?", "answer": "Be cautious. For a formal real estate test in Illinois, the test must be conducted by a licensed radon measurement professional using calibrated equipment under closed-building protocol. If your inspector used a RadonEye without being licensed for radon measurement, the test may not satisfy Illinois requirements. Ask for the inspector's Illinois radon measurement license number. 3.9 pCi/L is close enough to the 4.0 action level that a proper licensed test is worth doing to confirm.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0118", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "How do I pair a RadonEye with my phone?", "answer": "Download the RadonEye app for iOS or Android. Open the app, select \"Add device,\" and follow the Bluetooth pairing instructions. The device must be powered on and within Bluetooth range (typically 30 feet). Check the current app instructions from FTLab for the most up-to-date pairing steps, as these can vary between app versions and device models.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0119", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "Does RadonEye have historical data?", "answer": "Yes - the RadonEye app stores historical readings and shows trend graphs. The amount of history stored and how far back you can view depends on the app version and whether data is stored locally on the device vs synced to a cloud service. Check the current RadonEye app documentation for your model.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0120", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "The RadonEye reads in 10 minutes - what does that mean?", "answer": "RadonEye's pulsed ionization chamber technology allows it to show a preliminary reading much faster than monitors that need to accumulate data over many hours. This doesn't mean the reading after 10 minutes is as accurate as one after 7 days - it means you get early feedback faster. Use the displayed reading as an early indicator, but rely on the multi-day or multi-week average for making decisions.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0121", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "Can I export data from my RadonEye?", "answer": "Some RadonEye models and app versions support data export. Check the current RadonEye app for an export or download option. If you need data for a specific purpose (professional comparison, personal records), verify that your app version supports this feature.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0122", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "My RadonEye alarm went off. What do I do?", "answer": "Check the displayed reading to understand the level. If it's above 4.0 pCi/L, the EPA recommends action. If it's a spike that came and went (open a window, watch what happens), note whether it's a consistent elevated reading or a transient event. If your average over several days is at or above 4.0, give us a call so we can talk through what mitigation would involve for your home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0123", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "My RadonEye fell off the shelf. Is it still accurate?", "answer": "A single drop may or may not affect the sensor. After a fall, run it for 24-48 hours and compare readings to what you were seeing before. If the reading has shifted dramatically or is now giving unusual values (very low or very high without explanation), the sensor may have been damaged. Contact FTLab support or compare against a second source to assess accuracy.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0124", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "Can I plug the RadonEye into the wall instead of using batteries?", "answer": "Some RadonEye models support USB power input. Check the documentation for your specific model - not all support continuous AC power without a specific accessory. Using a USB power bank to avoid frequent battery changes is a common workaround for permanent basement installations.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0125", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "Is RadonEye good for post-mitigation monitoring?", "answer": "Yes - RadonEye's built-in display makes it easy to glance at current levels in the basement. The app provides trend history. It's a solid choice for ongoing post-mitigation monitoring. Keep in mind that the official post-mitigation test in Illinois must be done by a licensed professional - the RadonEye is your day-to-day check, not the required documentation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0126", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "My neighbor says RadonEye is more professional than Airthings because inspectors use it. Is that accurate?", "answer": "RadonEye is a consumer monitor, not a professional CRM. Some inspectors carry them as quick-check tools, but this doesn't make them equivalent to professional measurement devices. Both Airthings and RadonEye are consumer monitors with similar limitations for formal testing purposes. \"My inspector uses it\" doesn't make a consumer device meet professional measurement standards.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0127", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "My RadonEye and a professional charcoal test gave different numbers. Which is right?", "answer": "Differences between consumer monitors and professional tests are expected. A charcoal test under closed-building conditions with specific protocol gives a result that represents defined testing conditions. Your RadonEye reads under real-world conditions - which include open windows, people coming and going, and all the normal variation of a lived-in home. Both readings are information. For a decision (whether to mitigate), the professional test under defined conditions is more defensible.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0128", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "RadonEye - Answered", "question": "Can I use RadonEye to verify mitigation before the professional test?", "answer": "Yes - as an informal check. If your RadonEye shows 0.8 pCi/L three days after installation, that's a strong early indicator the system is working. But the official Illinois post-mitigation test requires a licensed professional regardless of what your consumer monitor shows.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0129", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "Why does radon tend to be higher in winter?", "answer": "In winter, homes are closed up tight - windows shut, less ventilation, negative pressure from heating systems. The temperature difference between indoors and outdoors creates a \"stack effect\" that draws soil gases (including radon) up through foundation openings. This is normal and expected. If you're using a consumer monitor, you'll likely notice higher readings in January than July. This is one reason professional testers often recommend testing under closed-house conditions - to capture a more representative (and typically higher) result.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0130", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "My radon is much higher in winter than summer. Should I use the winter or summer reading for my decision?", "answer": "The higher reading - winter - is more representative of your actual exposure, because you spend more time in a closed house in winter. If your winter reading is above 4.0 pCi/L and your summer reading is 2.0 pCi/L, your integrated annual exposure is closer to the higher end. Professional tests are typically run under closed-house conditions to better represent this.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0131", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "Why does radon spike when it rains?", "answer": "Barometric pressure drops during storms, and soil gases (including radon) can expand more easily into lower-pressure indoor air. Heavy rain also saturates the soil around the foundation, which can push soil gases - including radon - through cracks and openings more actively. Storm-related spikes are normal and usually temporary. If your long-term average is elevated, that matters more than a single storm spike.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0132", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "Does snow cover affect radon levels?", "answer": "It can. Snow on the ground acts as a seal over the soil, reducing radon escape to the outdoors. This can push more soil gas toward the foundation and into the house. Snow cover combined with a closed house and cold weather is often when homeowners see their highest readings. This is expected behavior.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0133", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "Does running the furnace fan continuously reduce radon?", "answer": "Running the furnace fan circulates air through the house but doesn't specifically dilute or exhaust radon. Some homeowners see modest reductions when the fan mixes basement and upper-floor air, but this isn't a radon solution - it's air circulation. A mitigation system specifically addresses the source of radon entry and is the appropriate solution for consistently elevated levels.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0134", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "Can an ERV or HRV help with radon?", "answer": "An Energy Recovery Ventilator (ERV) or Heat Recovery Ventilator (HRV) brings in fresh outside air while recovering heat energy. This can help dilute indoor radon by introducing outdoor air. However, ERVs and HRVs are primarily designed for general indoor air quality, not radon mitigation. If radon is consistently above 4.0 pCi/L, an ERV alone is not the standard solution - sub-slab depressurization (radon mitigation) is. An ERV may help somewhat, but it's not a substitute.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0135", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "Does opening windows every day in summer keep radon low?", "answer": "It can lower readings significantly during the open-window period. Many homeowners see much lower summer readings when windows are regularly open. This doesn't mean the radon problem is solved - when windows close in winter, levels will return. If your summer reading is low but your winter reading is elevated, the underlying radon source is still there. Testing under closed-house conditions gives a more accurate picture of your actual risk.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0136", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "Does my basement dehumidifier affect radon levels?", "answer": "A dehumidifier circulates basement air and removes moisture, but it doesn't introduce outside air or exhaust basement air. Some homeowners notice small reading changes near a running dehumidifier due to air movement. The dehumidifier alone doesn't resolve radon issues and doesn't substitute for mitigation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0137", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "Does a fireplace affect radon levels?", "answer": "A fireplace can create negative pressure in the house as it draws air for combustion. This negative pressure can pull soil gases - including radon - in through foundation cracks and openings. Heavy fireplace use, especially in a tight house, can correlate with elevated radon readings. If you use a fireplace frequently and have elevated radon, the fireplace combustion dynamic may be a contributing factor.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0138", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "My radon monitor reading rises overnight. Is the house getting more radon while we sleep?", "answer": "Yes - this is a common and expected pattern. At night, the house is closed up, people are less active, there's less air exchange, and barometric pressure often drops slightly in the early morning hours. These factors combine to produce higher radon readings in the early morning than in the afternoon. The overnight period is when radon tends to accumulate in a closed home. This is one reason good radon monitoring matters - you're sleeping in the highest-radon period of the day.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0139", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "I opened all the basement windows for a week and my radon reading dropped to 0.6 pCi/L. Does that mean the problem is solved?", "answer": "No - it means radon dilutes significantly with ventilation, which is expected. The source is still there. When you close the windows in fall and winter, levels will return. Ventilation is a temporary management approach, not a permanent fix. Mitigation addresses the source by preventing radon from entering the home in the first place.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0140", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "My radon reading went up after I had my HVAC ducts cleaned. Why?", "answer": "Duct cleaning can temporarily increase air movement and pressure in the home. If there are cracks or openings in the foundation and the pressure dynamics changed (more positive or negative pressure in certain areas), it could temporarily affect radon entry. If the elevated reading persists for more than a week after the work, it may not be related to the cleaning at all. Watch the trend over the next 7-14 days.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0141", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "My radon spiked during a cold snap. Is that real or is my monitor having an issue?", "answer": "Cold snaps can cause real radon spikes. Cold weather means closed windows, more stack effect (cold air sinking draws soil gases up), and potentially drier soil conditions. A cold-snap spike is real data. If your monitor has been accurate before and the spike correlates with a weather change, trust the reading. Watch to see whether it returns to your prior baseline once conditions moderate.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0142", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "Does barometric pressure affect my consumer monitor reading or just the actual radon level?", "answer": "It affects the actual radon level in your home - the monitor is accurately reporting what's there. Lower barometric pressure (ahead of storms) allows soil gas to migrate more easily into lower-pressure indoor air. The monitor isn't \"confused\" by pressure changes; it's picking up genuine changes in radon concentration. This is exactly the kind of information a continuous monitor provides.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0143", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Seasonal and Weather - Answered", "question": "My radon is lowest in August and highest in January. Is that a seasonal pattern I should show my mitigation contractor?", "answer": "Yes - that seasonal pattern is useful context. It confirms that your home has a baseline radon source that gets worse under closed-house winter conditions. This is typical for many Midwest homes. If your January average is at or above 4.0 pCi/L, that's the relevant decision point. A mitigation system will reduce levels year-round, and you'll still see some seasonal variation afterward but at much lower levels overall.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0144", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "Can my cat knock over my radon monitor?", "answer": "Yes - and if the monitor falls, check whether the reading changes unexpectedly in the following days. A single fall usually doesn't damage the sensor, but it's worth watching. If you have curious pets, consider placing the monitor on a shelf that's out of reach or securing it with a small velcro strip.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0145", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "Does a radon monitor detect smoke, CO, or natural gas?", "answer": "No. Consumer radon monitors measure only radon - they don't detect smoke, carbon monoxide, or natural gas. You need separate dedicated detectors for those. Smoke detectors, CO alarms, and natural gas detectors are separate devices. Don't use a radon monitor as a substitute for any of those.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0146", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "Why does my radon reading go up when I shower?", "answer": "Your shower doesn't directly produce radon, but hot showers increase humidity and can slightly pressurize the bathroom, pushing air around the house in ways that temporarily affect readings. More commonly, if your water supply is from a well with elevated radon in the water, showering can release dissolved radon into the bathroom air - but this is a different issue from soil-source radon. For most homes on municipal water, the shower effect on a radon monitor is minor.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0147", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "My toddler unplugged the radon monitor. Does the data reset?", "answer": "Depends on the model. Most consumer monitors retain internally stored data when power is interrupted - the device resumes recording when plugged back in. But if your Airthings Wave had batteries removed, some models start fresh from the next power-on. Check the behavior of your specific model. If data was synced to the app or cloud before the interruption, that history is preserved.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0148", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "My monitor is covered in dust from a renovation. Does that affect the reading?", "answer": "Significant dust buildup on or inside the sensing chamber can affect accuracy. After a dusty renovation, gently clean the exterior of the device (follow the manufacturer's guidance on cleaning). Let it run for a few days after the renovation is complete and conditions return to normal before relying on the reading. If the sensor appears clogged, contact the manufacturer for guidance.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0149", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "My radon monitor got wet in a basement flood. Is it still accurate?", "answer": "A monitor that has been submerged or heavily exposed to water should be assessed carefully. Dry it out completely before powering it on again if it uses batteries. Even if it powers on, internal moisture may affect sensor accuracy. Compare readings against a known source or professional test before trusting it again. For a significant flood event, contacting the manufacturer is the safest approach.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0150", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "Can radon monitors freeze in an unheated basement?", "answer": "Most consumer monitors have operating temperature ranges specified in their documentation. Extended exposure to freezing temperatures can damage electronic components. If your basement regularly drops below 32°F in winter, a monitor stored there may not give reliable readings and could be damaged. Check the manufacturer's operating temperature range for your specific device.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0151", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "My radon monitor fell off the shelf. Is it still accurate?", "answer": "Give it 24-48 hours and see if the reading seems consistent with what you were seeing before the drop. A fall may or may not damage the sensor - it depends on the impact. If readings appear dramatically different after a fall, the sensor may have been affected. Compare against a fresh professional test or contact the manufacturer.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0152", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "My toddler moved my radon monitor to a different room. Does that reading count?", "answer": "The location matters. If the monitor was moved to a bathroom, kitchen, or room near an outside door, the reading from there won't represent your lowest-level occupied space. Move it back to its original location and give it at least a week to re-establish a reliable reading for that spot.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0153", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "I went on vacation for 2 weeks. Is the data from an unoccupied house meaningful?", "answer": "It's informative - it tells you what radon does in your house when it's unoccupied and naturally sealed. This reading may actually be higher than typical occupied-house readings because the house was closed continuously. It's real data, not meaningless, though it may not represent your typical occupied conditions exactly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0154", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "Does my radon monitor measure anything other than radon?", "answer": "No - consumer radon monitors measure only radon. Some multi-sensor devices like the Airthings Wave Plus add CO2, VOC, temperature, and humidity - but the radon reading is a separate sensor channel. A radon monitor will not detect natural gas leaks, smoke, or carbon monoxide.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0155", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "Can I put my radon monitor next to my TV or electronics?", "answer": "Electronics themselves don't affect radon sensors directly. Keep the monitor in the breathing zone and away from vents, windows, and heat sources. Placing it directly on top of a hot appliance or in a spot where electronics create significant airflow could affect readings - but in most living spaces, a nearby TV or receiver won't cause a meaningful problem.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0156", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "My radon monitor is in a closet. Is that a valid location?", "answer": "Closets have reduced air circulation, which can make readings artificially high - air stagnates rather than representing what you're breathing in the room. Move the monitor to an open area of the room at breathing-zone height where air circulates freely.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0157", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "I put my radon monitor in the garage. Is that meaningful?", "answer": "If it's an attached garage with an interior door to the house and you spend time in it, a garage reading is interesting - but the priority is to measure the living space. If the garage is detached and unoccupied, it's not a useful measurement for your personal exposure. Move the monitor to the lowest occupied living space inside the home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0158", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "My radon monitor is right next to a sump pit. Should I move it?", "answer": "Yes - moving it away from the sump pit is a good idea. Sump pits are a common radon entry point, and a monitor directly next to an unsealed pit will show locally elevated readings that may not represent the general basement air. Move the monitor to the middle of the basement at breathing-zone height, away from the sump pit, exterior walls, and HVAC vents.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0159", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "Does carpet hold radon?", "answer": "No. Radon is a gas and moves through air - it doesn't accumulate in carpets or furniture. The radon level in the air of your basement is what matters, and the carpet under your monitor doesn't change that reading. Carpet is not a radon-mitigation tool and is not a radon risk factor on its own.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0160", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "Can I test radon during a renovation?", "answer": "Renovation work that opens walls, cuts floors, or disturbs the slab can temporarily create elevated radon readings because you're essentially creating new pathways for soil gas. If you're in the middle of a renovation, the reading may not be representative of normal conditions. Test after the renovation is complete and the home has been sealed back up for at least a week.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0161", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "I painted my basement and my radon reading dropped. Does paint lower radon?", "answer": "Temporarily closing off cracks or sealing concrete can reduce radon entry points slightly, but paint alone is not a radon mitigation strategy. The drop may be real but short-lived as the paint settles and any microscopic openings return. Don't rely on painting as a radon solution.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0162", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "My basement flooded. Should I move the radon monitor before cleanup?", "answer": "Yes - move it to higher ground before the flood restoration begins. Restoration work (fans, dehumidifiers, water extraction) will create unusual air movement that won't represent normal radon conditions. Give it at least a week after the work is complete and the space has returned to normal before trusting readings again.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0163", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "I have a wood stove in the basement and my radon goes up when I use it. Is that connected?", "answer": "It can be. A wood stove draws combustion air from the surrounding space and creates negative pressure in the basement. That negative pressure can pull soil gases - including radon - in through foundation cracks and openings. If you notice your radon consistently rises on wood stove days, the negative pressure from combustion is a likely factor.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0164", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "Can I use my radon monitor on the second floor to test radon up there?", "answer": "You can, but second-floor radon levels are typically lower than basement levels. If you're concerned about a specific room (a first-floor room that's at or near grade, or a room above a crawlspace), testing there makes sense. But for most homes, the basement is where you want to monitor - it's where radon concentrations are highest and where the exposure risk is greatest.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0165", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "I have an old radon monitor from the 1990s. Is it still accurate?", "answer": "Monitors from that era are almost certainly too old to be reliable. Sensor technology has advanced significantly, and older devices have had decades of operation that could degrade the sensor. If you're making any decision based on radon levels, use a current device or get a professional test. Don't rely on a 30-year-old consumer monitor for anything meaningful.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0166", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "I left my Airthings Wave in a hot car for a day. Could that damage it?", "answer": "Extreme heat can damage electronic components and may affect sensor accuracy. After heat exposure, allow the device to cool to room temperature before powering it on. Run it for a few days and compare readings to what you were seeing before. If readings look unusual, contact Airthings support.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0167", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "My monitor reading barely changes day to day. Is that good or bad?", "answer": "Very stable readings over many days usually mean either consistently stable radon conditions (possible in some homes) or that the device may have an issue. If the number is exactly the same to the decimal for more than 3-4 days, that's unusual - most consumer monitors show some variation. Try syncing/refreshing data and check that the device is powered and connected properly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-monitor-sample-answered-qas-recovered-0168", "phase": "phase3", "type": "answered_qna", "topic": "answered-monitor-sample-answered-qas-recovered", "category": "answered-monitor-sample-answered-qas-recovered", "subtopic": "Oddball Questions - Answered", "question": "Can I put my radon monitor inside a large piece of furniture, like inside a bookshelf cubby?", "answer": "Enclosed furniture spaces restrict air circulation and can artificially trap radon, giving elevated readings that don't represent the open room. Place the monitor on a surface where air can circulate freely around it - not inside a cabinet or cubby.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "answered-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0001", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What is an electronic radon monitor?", "answer": "An electronic radon monitor is a device you leave in your home to track radon levels continuously. Unlike a short-term charcoal canister test you send to a lab, an electronic monitor stays in place and updates its reading regularly - most show 24-hour, 7-day, and long-term averages. If you've just had a mitigation system installed, a continuous monitor is a good way to keep an eye on levels year to year.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0002", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "How does a consumer radon monitor work?", "answer": "Most consumer monitors use either an ionization chamber or alpha spectrometry to detect radon. When radon decays inside the sensing chamber, it releases alpha particles that the detector counts. The device uses those counts to calculate a radon concentration and display it in pCi/L (or Bq/m³ in some international models). The more counts it accumulates, the more statistically reliable the reading - which is why accuracy improves over hours and days of continuous monitoring.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0003", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Are electronic radon monitors accurate?", "answer": "Yes, when used correctly. Quality consumer monitors are accurate within about ±10% after 7 days of continuous operation. Some models using pulsed ionization chambers reach comparable accuracy within 1-10 hours. The key is placement - a monitor in a kitchen, bathroom, or on the floor will give misleading readings regardless of the device's quality. Place it in the lowest occupied room, in the breathing zone (20 inches to 6 feet off the floor), away from vents and windows.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0004", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "How do consumer radon monitors compare to professional radon tests?", "answer": "A professional short-term test is placed under a defined testing protocol and gives a documented result. A consumer monitor gives a continuous reading under real-world conditions - helpful for long-term tracking but not a replacement for a professional test when you're making a mitigation or real estate decision. If you are deciding whether to install a system, use reliable testing and the overall home situation rather than one quick monitor reading. After installation, a consumer monitor is great for ongoing peace of mind.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0005", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What is pCi/L and what does it mean for my home?", "answer": "pCi/L stands for picocuries per liter - a unit that measures radioactive concentration in air. For radon, the EPA action level is 4.0 pCi/L. The US average indoor level is about 1.3 pCi/L. A reading of 1.0 pCi/L is normal background; a reading of 8.0 pCi/L is roughly twice the action level and worth addressing. A properly designed mitigation system is intended to bring levels down substantially, with the final result confirmed by post-mitigation testing.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0006", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What is Bq/m³ and how does it relate to pCi/L?", "answer": "Bq/m³ (becquerels per cubic meter) is the international unit for radon. To convert: 1 pCi/L = 37 Bq/m³. The EPA action level (4.0 pCi/L) is equivalent to about 148 Bq/m³. Some monitors (particularly international versions of Airthings and RadonEye) display in Bq/m³ by default - check the settings to switch to pCi/L if you're in the US.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0007", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Do consumer radon monitors expire?", "answer": "The sensing elements in electronic monitors can drift over time, but most consumer monitors don't have a hard expiration date. Manufacturers generally design them for 5-10 years of reliable use. If your monitor is more than 10 years old and you're using it to make a mitigation decision, consider replacing it or comparing against a fresh professional test. Monitors that have been dropped, exposed to extreme humidity, or stored improperly may give inaccurate readings.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0008", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Is a continuous monitor better than a short-term charcoal test?", "answer": "They serve different purposes. A charcoal canister short-term test (48-96 hours) gives you a snapshot that's suitable for a real estate decision or pre-mitigation baseline. A continuous electronic monitor gives you ongoing trend data - great for post-mitigation monitoring and long-term peace of mind. If you want to know your radon level before making a decision, get a professional test. If you want to track levels year-round after mitigation is done, a consumer monitor is ideal.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0009", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What is the difference between a radon detector and a radon monitor?", "answer": "These terms are often used interchangeably. In practice, \"monitor\" usually refers to a device that continuously samples and updates readings, while \"detector\" can refer to either a continuous device or a passive test device (charcoal canister, alpha track). Electronic devices sold for home use are typically continuous monitors regardless of what the packaging calls them.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0010", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "At what level should I take action?", "answer": "The EPA recommends fixing if your level is 4.0 pCi/L or higher. The EPA also says consider fixing at 2.0-4.0 pCi/L - the risk is lower but real. Below 2.0 pCi/L approaches outdoor background levels. If you are getting readings in the 3-4 range consistently and there are young children in the home, that's worth a conversation. Call or text Bill and we can talk through what the numbers mean for your situation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0011", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Can radon levels change significantly from day to day?", "answer": "Yes - this is completely normal. Weather, barometric pressure, temperature, ventilation, and even opening windows can cause readings to swing by 50% or more in a single day. This is why the long-term average matters far more than any single reading. A 24-hour spike doesn't represent your actual exposure level. If your 30-day or 90-day average is consistently elevated, that's meaningful data.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0012", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "My reading is between 2.0 and 4.0 pCi/L. Should I do anything?", "answer": "The EPA says levels in this range are worth considering mitigation - the risk is lower than above 4.0 pCi/L, but it's not zero. If you are planning to stay in the home long-term, have young children, or smoke, it's worth a conversation. Give us a call and we can talk through whether your situation warrants action or ongoing monitoring.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0013", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What is a long-term radon test vs a short-term test?", "answer": "A short-term test runs for 2-7 days under closed-house conditions. A long-term test (alpha track) runs for 90-365 days and captures seasonal variation. Professional short-term tests are used for real estate transactions. Long-term tests are considered more representative of actual exposure. Consumer electronic monitors running for 30+ days give you an ongoing picture that falls between the two.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0014", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What is the difference between the Airthings Wave and the Airthings View?", "answer": "The Wave series (Wave Radon, Wave Plus) are battery-powered monitors that connect via Bluetooth to the Airthings app - no screen on the device; you wave your hand in front of it for a quick LED color check or open the app for the actual reading. The View series (View Radon, View Plus) have a built-in screen, connect via Wi-Fi directly to the cloud, and can act as a hub for Wave devices. If you want a standalone screen and remote access without a separate hub, the View Radon is the simpler choice.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0015", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Should I get a Wi-Fi radon monitor or a Bluetooth one?", "answer": "Wi-Fi monitors (Airthings View series, Ecosense EcoQube) sync continuously to the cloud and let you check radon levels from anywhere on your phone. Bluetooth monitors (Wave Radon, EcoQube Flex, RadonEye RD200) sync when your phone is nearby. If you travel and want to check your home's radon remotely, Wi-Fi is useful. For most homeowners who just want ongoing monitoring at home, Bluetooth is sufficient and usually simpler to set up.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0016", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Is the Airthings Corentium Home 2 worth the upgrade over the original?", "answer": "For most homeowners, yes. The Corentium Home 2 adds temperature and humidity tracking, doubles battery life (3 years vs 1.5 years), improves the display to a touchscreen with more data views, and adds SmartLink for optional hub integration. The price difference is modest.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0017", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What does the Ecosense EcoQube Flex do that the regular EcoQube doesn't?", "answer": "The EcoQube Flex runs on 2 AA batteries (up to 7 years in offline mode) and connects via Bluetooth only - it works anywhere without Wi-Fi or a power outlet. The regular EcoQube (EQ100) requires a power outlet and Wi-Fi connection. The Flex is better for basements or areas without convenient power or Wi-Fi; the regular EcoQube is better for continuous cloud monitoring in a Wi-Fi-connected home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0018", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Is the RadonEye RD200 good for homeowners or is it more of a professional tool?", "answer": "It bridges both. The RD200 is fast and accurate with a real OLED display - useful for homeowners who want a reading without opening an app. Many real estate professionals use it for quick pre-purchase checks. The standard RD200 is a consumer product; the RD200P is the professional version with Wi-Fi and report generation. For a homeowner doing post-mitigation monitoring, the RD200 works well.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0019", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "I'm finishing my basement. Does that affect radon?", "answer": "It can. Finishing a basement means adding flooring and walls over what was previously an unfinished slab and foundation - this can change radon entry patterns and make later sub-slab work more disruptive. If you don't have a mitigation system, installing one before finishing is much easier and less expensive than retrofitting after drywall is up. Call Bill before you start the project.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0020", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "We just added an addition to our house. Should we retest for radon?", "answer": "Yes. A new addition changes the foundation footprint and may introduce new sub-slab areas that weren't part of the original mitigation system. Retest after the addition is complete, and if the system's coverage doesn't extend to the new section, an expansion or additional suction point may be needed.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0021", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "I just had spray foam insulation installed in my basement walls. Will that reduce radon?", "answer": "Spray foam can seal some pathways radon uses to enter through foundation walls, which can modestly reduce radon levels in some homes. However, it's not a substitute for sub-slab depressurization. If your primary radon entry is through the slab and sub-slab soil (the most common path), spray foam on walls has limited impact. If levels remain elevated after spray foam, a mitigation system is the reliable fix.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0022", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Can I use an alpha track test at the same time as an electronic monitor?", "answer": "Yes, and this is actually a good combination. An alpha track detector (90+ day) gives you a long-term certified average; your electronic monitor gives you continuous real-time data and shorter-term trends. The two methods will typically converge toward similar long-term averages when properly placed. Any significant disagreement between the two is worth investigating.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0023", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What is the detection limit of a consumer radon monitor? (Monitor Basics)", "answer": "Most consumer monitors can detect radon levels down to 0.1-0.3 pCi/L. At very low levels (below 0.5 pCi/L), readings are less statistically reliable because there are fewer decay events to count. A reading of 0.2 pCi/L is real but means very little for health assessment - it's essentially background noise.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0024", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Do I need to calibrate my consumer radon monitor?", "answer": "Consumer monitors don't require user calibration in the field - they're factory calibrated and designed for multi-year operation. There's no official consumer recalibration program for most brands. If you suspect your monitor is inaccurate (readings seem inconsistent with a professional test), compare it against a fresh professional test result. If there's a large consistent discrepancy, consider replacing the monitor.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0025", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Can I use a consumer radon monitor in a commercial building?", "answer": "Consumer monitors are designed and rated for residential use. They can give useful data in a small commercial space (office, home-based business), but they're not certified for commercial or workplace radon monitoring. OSHA has separate guidelines for radon in workplaces, and certified measurement equipment is required for official commercial radon assessments.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0026", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "My Airthings Wave Plus shows green for radon at 3.5 pCi/L but yellow for CO2 at 1,100 ppm. Should I worry about the CO2?", "answer": "High CO2 (above 1,000 ppm) typically indicates inadequate ventilation - too many people in the space relative to fresh air intake. It's a comfort and cognitive issue, not an immediate health emergency at 1,100 ppm. For the radon: 3.5 pCi/L is below the action level but worth monitoring. For the CO2: increasing ventilation (opening windows when weather allows, or upgrading to an ERV/HRV) will help. These are separate issues with separate solutions.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0027", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "My monitor has been running for 90 days and the long-term average is 4.3 pCi/L. What should I do?", "answer": "A 90-day average of 4.3 pCi/L is a reliable result that warrants mitigation. It's above the EPA action level and well-established by 90 days of data. Call or text Bill - we'll schedule a site visit to look at your home's foundation and sub-slab conditions, and we can typically have a system running within a couple of weeks.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0028", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Is there any reason not to leave a radon monitor in the same spot for years?", "answer": "No good reason - in fact, leaving it in one consistent location gives you the most comparable long-term data. You can correlate readings year over year and spot any trends (gradual increase might indicate fan degradation; sudden increase might indicate a new entry point). The only reason to move it would be to check another area of the home or to replace it after the design lifespan.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0029", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What's the difference between a 30-day average and a \"long-term\" average on my monitor?", "answer": "On most monitors, \"long-term\" means since the last reset (or since the device was first powered on). This could be 30 days, 90 days, or years of data. The 30-day view gives a rolling month window. For understanding your typical level, a 90+ day average that spans seasonal variation is more representative than 30 days. After a year of continuous monitoring, your \"long-term\" average is very meaningful.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0030", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What is the US indoor radon average?", "answer": "About 1.3 pCi/L is the US national indoor average. Levels above this are common depending on local geology and home construction.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0031", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What is the outdoor background radon level?", "answer": "About 0.4 pCi/L on average outdoors. This is why mitigation systems don't reduce indoor levels to zero - they target bringing indoor levels close to this background.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0032", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What does \"closed-house conditions\" mean?", "answer": "Keeping exterior windows and doors closed (except for normal entry/exit) for at least 12 hours before and during a professional short-term radon test. Normal HVAC operation is fine; the point is preventing outdoor air dilution of indoor radon.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0033", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Will mitigation affect my home's air pressure?", "answer": "A properly designed system draws air from below the slab, not from your living space. The effect on house pressure should be minimal. An improperly sized system can occasionally create slight negative pressure if it's drawing too much air - Bill assesses this during installation to make sure the system is balanced.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0034", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Is radon only found in certain states or regions?", "answer": "Radon is found in all 50 states. Illinois is classified by the EPA as Zone 1 (highest potential) across much of the northern and central parts of the state. But even Zone 3 areas can have individual homes with high radon - geology varies at the neighborhood and block level.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0035", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "My house was built on a concrete slab - does that mean I have less radon?", "answer": "Not necessarily. Concrete is porous and can transmit radon. Slab-on-grade homes can have elevated radon just as homes with basements can. The sub-slab soil composition matters more than the presence of concrete.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0036", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Can my gas fireplace or furnace affect radon readings?", "answer": "Gas appliances that draw combustion air from the home create negative pressure that can pull more radon in from the sub-slab. This is part of why combustion appliances should use sealed, direct-vent systems. If you've recently added a sealed combustion furnace, it may reduce the depressurization that was drawing radon into the home - which could result in lower radon levels.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0037", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Can radon enter through my water?", "answer": "In some parts of the country, private well water can contain dissolved radon that is released into the air when the water is used (showering, washing dishes). This is more common in areas with granite bedrock. Municipal water supplies typically treat for radon. If your home is on a well and radon levels are a concern, water testing is a separate step from air testing.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0038", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "My house has a finished basement with no visible cracks in the slab. Can radon still get in?", "answer": "Yes - radon doesn't need visible cracks. It can diffuse through porous concrete, enter through the gap between the slab and foundation wall (the \"cold joint\"), and travel through hollow-core block walls. The invisible pathways are often the primary entry routes.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0039", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "What is a sub-slab depressurization system?", "answer": "Sub-slab depressurization (SSD) is the most common and effective form of radon mitigation. It involves drilling a hole through the foundation slab, inserting a pipe into the sub-slab material, and connecting a fan that continuously pulls air from below the slab and exhausts it outside. This creates negative pressure under the slab that prevents radon from entering the home. It's the standard for Illinois installations.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0040", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Can mitigation also help with moisture in the basement?", "answer": "Yes - sub-slab depressurization draws out sub-slab moisture along with radon. Many homeowners notice reduced basement humidity and dampness after a system is installed. This is a secondary benefit, not the primary goal, but it's real.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0041", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Do I need multiple radon mitigation systems for a large house?", "answer": "Possibly. For homes larger than about 2,500 sq ft, or homes with complex sub-slab layouts, multiple suction points - and sometimes multiple fans - may be needed to depressurize the entire area under the slab. Bill assesses sub-slab communication during the site visit to determine how many suction points are needed for effective coverage.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0042", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Does putting plastic sheeting over my basement floor help with radon?", "answer": "In an unfinished basement, sealing the slab surface with plastic sheeting or epoxy coating may modestly reduce radon entry, but it's not an effective long-term solution because radon still enters through cracks, pipe penetrations, and the cold joint. Active sub-slab depressurization addresses the source rather than trying to block the symptom.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0043", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Will a dehumidifier affect my radon readings?", "answer": "A dehumidifier draws in basement air and removes moisture, then recirculates the air. It doesn't significantly change radon levels - it doesn't vent radon-containing air outside. In some cases a dehumidifier running near a test device can cause air movement that slightly affects readings. For testing purposes, don't place a monitor directly in the airflow of a dehumidifier.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0044", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Can I install a radon monitor in an attic crawlspace?", "answer": "An attic is not a living space and is not where radon exposure occurs - radon concentrations in attics are typically near or below outdoor background levels (radon vents up). There's no radon monitoring value in placing a device in an attic.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0045", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Basics", "question": "Is the radon reading different when the air conditioning is running?", "answer": "Air conditioning recirculates interior air without introducing outside air, so it has minimal effect on radon levels. HVAC systems with active fresh air intake (ERV, HRV) can dilute radon when pulling in outdoor air. A traditional central AC system doesn't significantly change radon concentration.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0046", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "Where should I put a radon monitor in my house?", "answer": "Place it on the lowest occupied level of your home - usually the basement. Height should be in the breathing zone: at least 20 inches off the floor, no higher than 6 feet. A bookshelf, nightstand, or countertop in a basement bedroom or family room is ideal. Keep it away from kitchens, bathrooms, laundry rooms, and directly next to windows or exterior doors.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0047", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "Should I put my radon monitor in the basement or on the main floor?", "answer": "The basement if you have one, even if it's unfinished. Radon levels are almost always highest at the lowest level - that's where radon enters the home. Testing on the main floor or above will give you lower readings that don't reflect your worst-case exposure. If you are making a mitigation decision, the basement reading is what matters.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0048", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "My basement is unfinished storage space. Where should I put the monitor?", "answer": "Still in the basement, if possible. Place it in the most central, accessible location - not in a closet or utility corner, but an open area. Even if the basement is unfinished, the readings there are what matter for understanding your home's radon entry level. If the basement is truly not accessible (utility access only), place the monitor on the first floor and note that basement levels would likely be higher.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0049", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "Can I put a radon monitor in the kitchen?", "answer": "No - this is one of the locations to avoid. Kitchens have frequent humidity changes from cooking, ventilation from range hoods, and combustion products that can interfere with some radon sensors. Placement here won't give you a representative reading. Use a living room, family room, or bedroom on the lowest occupied level instead.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0050", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "How high off the floor should a radon monitor be? (Monitor Placement and Testing)", "answer": "Between 20 inches and 6 feet - the breathing zone. At least table or countertop height. Don't place it on the floor (radon doesn't settle at floor level, but air mixing is minimal near the floor). Don't place it on a high shelf above 6 feet - that's above typical breathing height.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0051", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "Can I put a radon monitor in a closet? (Monitor Placement and Testing)", "answer": "No. Closets have stagnant air that's not representative of the room's radon level. Air mixing in a closed closet is minimal - the monitor will measure the small pocket of air in that space, not the room you're actually breathing in. Put it in the open room.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0052", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "My house has a crawlspace, not a basement. Where do I put the radon monitor?", "answer": "On the first floor - the lowest occupied level for a crawlspace home. The crawlspace itself is not occupied and the conditions inside it are extreme (very high radon is possible directly under the vapor barrier or floor structure). Testing on the first floor gives you the level your family is actually exposed to. Place the monitor in the living room or a bedroom, away from exterior walls and vents.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0053", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "My slab-on-grade house has no basement. Where should the monitor go?", "answer": "On the first floor, in the main living area. A living room, den, or bedroom away from the kitchen and bathroom is ideal. Same height rules apply - between 20 inches and 6 feet above floor. For slab homes, the first floor is your entry level for radon, so that's the right place to test.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0054", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "Can I put a radon monitor near a window?", "answer": "Avoid placing it right next to a window. When the window is open, the monitor will measure diluted outdoor air, giving you a falsely low reading. Keep at least 12 inches from any exterior window or door, and note that readings taken during periods of open-window ventilation won't represent your closed-house level.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0055", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "Can I put a radon monitor in a garage?", "answer": "No - garages aren't living spaces and typically have combustion sources (cars, lawnmowers, gas cans) that can interfere with sensors. More importantly, garage levels don't represent the radon your family is breathing in the living areas of the home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0056", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "How far should a radon monitor be from an HVAC vent?", "answer": "At least 3 feet from a supply vent. Supply vents blow conditioned air that can dilute local radon concentrations and give a falsely low reading. Return air vents have less impact, but a few feet of clearance is still good practice.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0057", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "Should I move my radon monitor around to test different rooms?", "answer": "For the most useful data, leave it in one place long enough to get a stable long-term average (30+ days). Moving it frequently means each location's average is too short to be meaningful. If you want to check multiple areas of a large home, either run multiple monitors simultaneously or leave one in each location for at least a month before moving it.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0058", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Placement and Testing", "question": "My radon monitor is in the basement right next to the sump pit - is that a problem?", "answer": "Potentially. If the sump pit lid has gaps or is not properly sealed, it can create a localized high-radon area near the sump. A monitor placed very close to an open sump may read higher than the room average. For a representative basement reading, place the monitor at least a few feet away from the sump pit, in the middle of the room rather than near a known entry point.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0059", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What does the 24-hour average on my monitor mean?", "answer": "The 24-hour average reflects the mean radon level over the last 24 hours. It's useful for spotting recent changes (like after a storm or after you've been opening windows) but it's not the number to use when deciding whether to mitigate. A single 24-hour reading can be twice as high or half as high as your true long-term level depending on weather and conditions that day.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0060", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My monitor shows 6 pCi/L right now but my 7-day average is 3.2 - which do I trust?", "answer": "Trust the 7-day average more. Current readings fluctuate constantly based on barometric pressure, weather, and ventilation. The 7-day average smooths out those swings and gives a better picture of your typical level. For the most meaningful data, look at the 30-day average or longer.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0061", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Why did my radon level spike to 8 pCi/L overnight?", "answer": "Overnight spikes are common and usually reflect natural pressure changes. When outdoor temperature drops overnight, indoor-outdoor pressure differences increase - this drives more radon through foundation cracks. Low-pressure weather systems (approaching storms) also tend to pull more radon into homes. A single overnight spike is not representative of your long-term exposure. If your long-term average is elevated, that's the number to act on.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0062", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings shows green but my reading is 3.8 pCi/L - is green misleading?", "answer": "Airthings displays green for readings below 4.0 pCi/L. The 3.8 pCi/L reading is technically below the EPA action level, so the green color is accurate by that threshold. Even so, the EPA does say consider mitigation at 2.0-4.0 pCi/L, especially for long-term residents. If you are consistently at 3.5-4.0 pCi/L, it's worth a conversation. Call or text Bill and we can help you think it through.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0063", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What's the difference between the \"current\" reading and the \"long-term\" average on my monitor?", "answer": "The current (or short-term) reading reflects recent radon levels - often just the last hour or few hours. The long-term average accumulates over weeks or months. The long-term average is what matters for health exposure assessment. Think of the current reading as your weather forecast right now versus your monthly average temperature - both are real, but one tells you about the season, not just the moment.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0064", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My reading went from 2.0 to 5.0 pCi/L after I closed all my windows for winter - is that normal?", "answer": "Yes, very normal. Winter closed-house conditions let radon accumulate that was previously diluted by ventilation. The open-window summer readings were artificially low; the closed-house winter readings are closer to your actual year-round exposure level. If your winter average is consistently above 4.0 pCi/L, that's the level that matters for your health risk, and mitigation is worth considering.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0065", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My monitor read 0.3 pCi/L this morning - does that mean there's no radon in my house?", "answer": "Not exactly - a reading of 0.3 pCi/L just means the level is very low, below indoor background levels. All air has trace amounts of radon; even outdoor air is typically around 0.4 pCi/L on average. A reading this low is good news. It may also reflect ventilation (recently opened windows) or a monitor still settling in. Check the long-term average after 30 days for a more stable picture.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0066", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My monitor shows 1.5 pCi/L now but showed 4.5 last winter - do I still need mitigation?", "answer": "The seasonal swing you're describing is typical - radon is generally higher in winter (closed house, stack effect) and lower in summer (open windows). The winter number is more representative of the level during the months when your home is tightly sealed. If you are spending significant time in the basement and seeing consistent winter averages above 4.0 pCi/L, mitigation makes sense. A professional annual test run in the winter gives the most conservative and representative reading.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0067", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Does radon level differ between floors in my house?", "answer": "Yes - radon levels decrease with height. The basement is almost always the highest. First floor is typically 30-50% lower than the basement. Second floor and above are usually much lower still. The basement (or lowest occupied level) is always the right place to measure for mitigation decisions because it represents the worst-case exposure and the point where radon enters the home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0068", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My monitor shows pCi/L and my test report shows Bq/m³ - how do I compare them?", "answer": "Multiply pCi/L by 37 to get Bq/m³. Divide Bq/m³ by 37 to get pCi/L. So 4.0 pCi/L = 148 Bq/m³. The EPA action level of 4.0 pCi/L is equivalent to about 148 Bq/m³. Some monitors (especially international versions) default to Bq/m³ - check your device settings to switch to pCi/L.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0069", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My 7-day average is 4.2 pCi/L. That's just slightly over the action level - is it really worth fixing?", "answer": "Yes. The EPA action level isn't a sharp threshold below which radon is harmless - it's the level at which mitigation is clearly recommended. At 4.2 pCi/L, you're above that line. The good news: a properly installed mitigation system is intended to bring levels down substantially. mitigation is a practical, one-time home improvement. Give Bill a call and we can take a look at your home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0070", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "How much can radon levels vary within the same house?", "answer": "Significantly. Sub-slab conditions, foundation type, and distance from entry points all affect local readings. A monitor in the northeast corner of a basement may read quite differently from one in the southwest corner - especially in homes with multiple rooms, finished sections, and different sub-slab materials. One monitor gives a reasonable picture of the overall level; multiple monitors in different sections of a large basement give better coverage.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0071", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My monitor just showed 12 pCi/L for one reading - What should I do?", "answer": "No - but do pay attention to it. A single reading of 12 pCi/L can be a temporary spike (barometric pressure drop, recent ventilation event). Look at your 7-day and long-term averages. If those are also elevated, that's when action is warranted. If the spike was isolated, let the monitor run for another few weeks and check the long-term average. If you are still concerned, call or text Bill and we can help you interpret the data.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0072", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "The Airthings View Radon shows a reading on the display but my app says it's offline - why?", "answer": "If the View is running on batteries (not USB), it won't act as a hub or cloud-sync. Connect the View to USB power - when USB-powered and Wi-Fi is connected, it syncs every 2.5 minutes and also acts as a hub for other Airthings devices. The on-device display works regardless of connectivity.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0073", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My radon monitor reading jumped from 2.0 to 9.0 overnight - is something wrong with it?", "answer": "Probably not. Overnight spikes are common and usually reflect a natural pressure event - a storm moving in, a cold front, a significant barometric pressure drop. Radon is driven into homes by pressure differentials, and those can change rapidly with weather. Check your 7-day average to see if the spike is isolated or part of an upward trend. A single night spike is not representative of your long-term level.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0074", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings has been showing the same reading for two weeks without changing at all. Is it working?", "answer": "If it's showing the exact same digit repeatedly with no variation at all, it may have stopped updating. Try opening the Airthings app and manually syncing. If you have a standalone display model, check that the battery isn't depleted (dead batteries can sometimes cause frozen displays). If the reading genuinely hasn't moved at all in two weeks, contact Airthings support.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0075", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings View Radon stopped showing readings after a power outage. How do I get it back?", "answer": "After a power outage, the View Radon should resume on its own once power is restored. If it's battery-powered it should never have lost readings. If it's USB-powered, it should restart automatically. If the display remains blank, check the USB connection. If Wi-Fi was interrupted, the device may need to reconnect to the network - check the Airthings app for the device status.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0076", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My two radon monitors in the same room show different readings - one says 3.2 and the other says 4.8. Why?", "answer": "Radon is not perfectly uniformly distributed in a room. Minor placement differences - height, proximity to air currents, distance from the sump, position relative to foundation - can produce different readings in the same space. Both readings are plausible; the truth is somewhere in between. Use the average of the two as your baseline, and note any systematic difference in their placement that might explain the spread.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0077", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Is radon the same as carbon monoxide? Do I need a different detector?", "answer": "They are completely different gases requiring different detectors. Carbon monoxide (CO) is produced by combustion (furnace, car, water heater) and is an acute danger - CO detectors alarm immediately and you evacuate. Radon is a radioactive gas from the ground that causes lung cancer through long-term exposure - no immediate symptoms. Radon monitors and CO detectors serve different purposes; every home should have CO detectors on each level, separate from any radon monitoring.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0078", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Can my smoke detector detect radon?", "answer": "No - smoke detectors detect smoke particles (optical) or ions from combustion (ionization). Neither technology detects radon. These are separate devices. If you want radon monitoring, you need a radon-specific device.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0079", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My realtor says the radon test was \"fine\" but I don't know what the number was. Should I ask?", "answer": "Yes - always ask for the actual number. \"Fine\" is subjective. Anything below 4.0 pCi/L is below the EPA action level, but levels at 3.5-4.0 pCi/L are in a range where many people choose to mitigate, especially long-term residents. Knowing the number lets you make an informed decision.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0080", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My monitor says \"long-term average: 3.1 pCi/L\" - is that bad?", "answer": "It's in the 2.0-4.0 pCi/L range where the EPA says consider mitigation. It's not at the action level, but it's elevated above background. If you plan to stay in the home long-term, especially with children, it's worth a conversation. Give Bill a call - we can discuss whether mitigation makes sense for your situation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0081", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What's the difference between short-term and long-term averages on my monitor?", "answer": "Short-term averages (24 hours, 7 days) reflect recent conditions - useful for spotting trends but sensitive to weather and ventilation. Long-term averages (30 days, 90 days, 1 year) reflect a more stable picture of your home's radon level across different weather and seasonal patterns. For health exposure assessment, the long-term average matters most. For troubleshooting (did opening windows help?), short-term is useful.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0082", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings shows a 24-hour average of 5.2 but a long-term average of 2.8 - which should I report to Bill?", "answer": "Both, but lead with the long-term average. A 24-hour average of 5.2 pCi/L may reflect a storm or recent closed-house conditions; the 2.8 pCi/L long-term tells a more complete story. Tell Bill: \"my long-term average is about 2.8 pCi/L but I saw it jump to 5.2 yesterday during a storm.\" That gives the full picture.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0083", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What happens if the power goes out - does my radon level spike?", "answer": "Yes, temporarily. When the fan stops, the pressure below the slab re-equalizes and radon can begin entering the home again. Levels typically take hours to rise to pre-mitigation levels. Once power is restored and the fan restarts, levels drop again. A one-time brief outage has negligible long-term health impact. Extended outages (days) during high-radon conditions are worth noting, especially if you're tracking levels with a consumer monitor.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0084", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My mother-in-law lives in her basement in-law suite. The reading down there is 6.0 pCi/L.", "answer": "6.0 pCi/L is well above the EPA action level, and full-time occupancy of a basement at that level is a meaningful long-term health concern. If she's living there as her primary space - sleeping, spending time, cooking - that's a high-exposure situation. Mitigation works for in-law suites the same as for any home, and a system can typically bring levels below 2.0 pCi/L. This is worth prioritizing. Call or text Bill and we can talk through what the installation would involve.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0085", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My consumer monitor reading spiked after a rainstorm. Is my system failing?", "answer": "Probably not - storm-related radon spikes are common and temporary. Rain raises soil moisture and increases subsurface pressure, pushing more radon into the home. A healthy mitigation system handles this well, but a severe storm can temporarily overwhelm it. Check your 24-hour reading after a day or two of dry weather - if it returns to your normal post-mitigation baseline, the system is working. If readings stay elevated for several days, or if the spike is much larger than previous storms, check the manometer and give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0086", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "I moved the radon system fan from the basement to the attic. My readings went up. What happened?", "answer": "Fan location matters. Moving the fan changes the suction dynamics - where it's positioned affects how effectively it pulls from the suction pit under the slab. Attic-mounted fans are common and work well, but the routing from the suction point needs to be designed correctly for the specific home. If readings went up after the move, there may be a suction loss from a loose connection, a change in pipe routing, or the fan not being matched correctly to the new configuration. Give us a call and we can take a look at what changed.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0087", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My post-mitigation test came back at 0.8 pCi/L. Is that a real reading or is it just background?", "answer": "That's a real reading and a great result. 0.8 pCi/L is below the US average indoor radon level of 1.3 pCi/L - you're essentially at outdoor background levels inside your home. Some homes with very effective mitigation hit this range. The system is doing its job well. Keep an eye on your consumer monitor's long-term average year to year to make sure it stays low, and check the manometer twice a year. You're in great shape.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0088", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My system was installed last winter. My readings this summer are lower than they were right after installation. Is something broken?", "answer": "Nothing is broken - that's seasonal variation working in your favor. Radon levels are typically higher in winter (closed house, ground frozen, pressure differential) and lower in summer (more ventilation, different pressure patterns). A summer reading that's lower than your winter post-installation reading is completely normal. Your annual average is what matters for long-term health purposes. If you were tracking your consumer monitor all year, the long-term average is the most meaningful single number.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0089", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My system was installed 2 years ago. My readings are still low (1.4 pCi/L). Do I need to do anything?", "answer": "Not right now - 1.4 pCi/L is excellent and the system is clearly working. Check the manometer once or twice a year to confirm the fan is still creating suction. Keep an eye on your consumer monitor's long-term average. If it starts climbing or the manometer equalizes, call us. Otherwise, the system is doing its job and no action needed. The 5-year fan warranty is still in effect if anything fails.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0090", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Is it normal for my consumer monitor to show different readings on different floors after mitigation?", "answer": "Yes, this is normal even after mitigation. Radon levels naturally decrease with elevation in the home - the source is the soil, so floors closer to the slab have higher concentrations. After mitigation, the difference between floors shrinks (because the sub-slab is depressurized), but it doesn't disappear entirely. A basement reading of 1.5 pCi/L and a first-floor reading of 0.9 pCi/L after mitigation is a common and healthy pattern. Nothing to be concerned about.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0091", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "How soon after my mitigation system is turned on should I check my radon monitor?", "answer": "Check it after 48-72 hours for a directional reading - this gives you early confirmation that levels are dropping. But don't make conclusions from those first readings alone. Wait for the 7-day average to stabilize to get a better picture. For the official post-mitigation result, a professional short-term test must be done within 24 hours to 30 days of activation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0092", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "My monitor still shows 3.8 pCi/L two days after my mitigation system was installed - did it work?", "answer": "Two days is still early. The system is actively drawing radon from under the slab, but it takes time to flush elevated air from a home, especially in larger spaces. Check your 7-day average once it's available. If levels are still above 4.0 pCi/L after 7-10 days, call Bill - we'll check the system and make sure everything is performing correctly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0093", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "Do I still need a professional post-mitigation test if I have a consumer monitor?", "answer": "Yes - Illinois code (§ 422.150) requires a post-mitigation test performed by an independent licensed measurement professional within 30 days of system activation. Your consumer monitor is great for ongoing tracking, but it's not a professional test instrument and its reading can't substitute for the code-required professional result.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0094", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "My mitigation system has been running for a month and my long-term average is 1.4 pCi/L - is that good?", "answer": "That's an excellent result. Most homes come in well below 2.0 pCi/L after a properly installed system. A long-term average of 1.4 pCi/L is very close to typical outdoor background levels. Keep the monitor in place for ongoing annual tracking, and have the manometer (pressure gauge on the pipe) checked periodically to confirm the fan is still running.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0095", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "My radon level dropped from 8.0 to 1.2 pCi/L after mitigation. Is that normal?", "answer": "That's a great result. Large drops are common when pre-mitigation levels are high and the sub-slab conditions are favorable for depressurization. A drop of 85%+ is not unusual for a well-designed system. Keep the monitor running to confirm those levels hold over time.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0096", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "My radon level went UP after the system was installed - what's happening?", "answer": "This is unusual and worth a call to Bill. Occasionally, an improperly installed system can create pressure differentials that draw radon from other parts of the foundation into the living space. More commonly, the system may not be pulling from the right locations. Give us a call and we'll investigate.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0097", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "How do I know if my mitigation fan stopped working?", "answer": "The simplest check is the manometer - the U-tube pressure gauge on the pipe. If both liquid columns are at the same level, the fan has stopped. If one column is higher than the other, the fan is running. You can also usually hear the fan running quietly. A consumer monitor showing levels climbing back toward pre-mitigation levels is another indicator.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0098", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "The official post-mitigation test came back at 2.6 pCi/L but my monitor shows 1.4. Why the difference?", "answer": "Several factors can cause this difference: test device placement (professional test may be in a different spot), short-term conditions during the test period (weather, ventilation), and the difference in measurement method between a professional continuous radon monitor and your consumer device. Both readings are reasonably close, and 2.6 pCi/L is below the EPA action level. The professional test is the officially recorded result; your consumer monitor provides ongoing tracking.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0099", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "My mitigation system was installed six months ago and my monitor still reads 2.2 pCi/L. Is that a good result?", "answer": "Yes - 2.2 pCi/L is well below the EPA action level of 4.0 pCi/L and close to typical background levels. The goal of mitigation is to reduce radon to as low as reasonably achievable; most systems aim for below 2.0 pCi/L. If your pre-mitigation level was significantly higher than 2.2 pCi/L, the system is working. Keep monitoring annually.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0100", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "What should I do if my radon level goes back up after mitigation?", "answer": "Call Bill. Rising levels after a previously successful mitigation can indicate fan failure (check the manometer - equal liquid levels means fan off), new radon entry points, or changes to the foundation. Don't wait to see if it self-corrects - schedule a check of the system.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0101", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "My post-mitigation professional test came back at 1.5 pCi/L. Do I ever need to test again?", "answer": "Yes - periodic retesting is good practice. The EPA recommends retesting every two years or after any major renovation that could affect the foundation (new addition, basement finishing, sump installation). Your consumer monitor provides ongoing tracking, but a professional test every couple of years gives you a certified benchmark.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0102", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "How do I know the manometer is showing the right thing?", "answer": "The manometer is a U-tube gauge filled with colored liquid, usually mounted on the vertical pipe. When the fan is running, suction in the pipe pulls the liquid on the pipe side down, making the exposed side higher. If both sides are equal, the fan is off or not working. If you see unequal levels, the system is active. The exact difference (how much higher one side is) reflects the amount of suction - typical readings are 0.5 to 1.5 inches water column.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0103", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "Can I turn off the radon fan when we're not home to save electricity?", "answer": "No - the fan should run continuously, 24 hours a day, 7 days a week. Sub-slab pressure quickly re-equilibrates when the fan stops, and radon levels can begin rising within hours. The electricity cost for a radon fan is modest - most fans draw 15-100 watts. Turning it off to save power is not worth the risk of radon returning.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0104", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "My neighbor says her radon system fan is really loud. What affects fan noise?", "answer": "Fan location matters most - a fan mounted in an attic above insulation is nearly silent inside the home. A fan mounted in a basement utility room or on an exterior wall near a bedroom is more audible. The fan itself also varies - EC (electronically commutated) fans run quieter than AC motors. Installation with flexible coupling (Fernco or LDVI connector) between the fan and pipe prevents vibration from traveling through the rigid PVC and being amplified by walls. If noise is a concern, it's worth discussing with Bill during installation planning.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0105", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "What's the normal sound of a radon mitigation system?", "answer": "A low, steady hum, typically comparable to a refrigerator or bathroom exhaust fan. You usually hear it near the pipe or fan but not prominently from other rooms. If the system suddenly becomes louder, rattles, or makes a grinding sound, the fan may need inspection. Call Bill.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0106", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "I just got a radon system installed. How long until my monitor shows lower levels?", "answer": "Most homes see a noticeable drop within the first 24-48 hours. The fan starts pulling sub-slab air and exhausting it above the roofline immediately, and indoor radon levels begin to drop as the existing radon in the air is replaced with cleaner outdoor air. Your consumer monitor's 24-hour average should look different after day one. The 7-day and long-term averages take longer to reflect the change - they're mathematical averages that incorporate earlier high readings. Give it 2-4 weeks and your long-term average will show the real post-mitigation picture.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0107", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "My system was installed 3 days ago and my Airthings still shows 4.2 pCi/L. Is something wrong?", "answer": "Check which number you're looking at. If it's the long-term average or 7-day average, those are rolling averages that still include your pre-mitigation readings - they'll take a couple of weeks to reflect the drop. If your 24-hour average is still at 4.2 after 3 days, that could indicate the system needs an adjustment. Also check the manometer (U-tube gauge on the pipe) - if both liquid columns are at equal height, the fan isn't creating suction. If the 24-hour reading remains high after a week, give us a call and we'll take a look.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0108", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "What is the U-tube gauge on my radon system for?", "answer": "That's a manometer - it tells you at a glance whether your system is creating suction. It's a clear U-shaped tube partially filled with colored liquid. When the fan is running correctly, one column of liquid will be higher than the other - the difference between the two heights is the suction pressure. If both columns are at the same height, the fan has stopped or isn't creating pressure. Normal operating range is about 0.5 to 1.5 inches water column difference. Check it once or twice a year - it takes about two seconds. If the levels are equal, give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0109", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "My official test came back at 1.2 pCi/L but my consumer monitor shows 2.8. Which do I trust?", "answer": "Trust the professional test for the purpose it was designed for - it was conducted under controlled closed-house conditions by a calibrated device analyzed in a certified lab. Your consumer monitor runs continuously under real-world conditions, which include windows opening, weather changes, and HVAC cycling. A consumer monitor showing 2.8 with real-world variation while your professional closed-test showed 1.2 is completely consistent - they're measuring different things. The 1.2 is your baseline under controlled conditions; the 2.8 is your real-world average. Both are well below the EPA action level. All good.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0110", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "My Airthings long-term average dropped from 6.0 to 1.3 after installation. Is that normal?", "answer": "That's a great result and very typical. A well-installed system in a home with good sub-slab communication can drop levels by 70-90%, and 1.3 pCi/L is essentially outdoor background levels indoors. That's exactly what the system is supposed to do. The official post-mitigation test within 30 days will confirm the number under controlled conditions. After that, your Airthings long-term average is a good ongoing check to make sure levels stay low. Nice work getting it done.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0111", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "It's been 5 years since mitigation. My Airthings long-term average has crept up from 1.1 to 3.2. What's happening?", "answer": "The most common reason is the fan. Radon fans are rated for 5-10 years of continuous operation, and some start to lose efficiency before that. Check your manometer - if the liquid differential is lower than it was (or equal on both sides), the fan is losing power or has stopped. American Radon Systems covers fan replacement free of charge for 5 years after installation. If you are at 5 years, call us and let's check whether it's still under warranty and get the fan inspected or replaced. Don't ignore a rising trend - it's telling you something.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0112", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "The liquid in my manometer is even on both sides. Is my system still working?", "answer": "If both columns are at equal height, the system is not creating suction - which means the fan has stopped or failed. This needs attention. First check that the fan is plugged in and that the outlet has power (check the breaker). If power is on and the fan motor is silent when you put your hand near it, the fan has likely failed. Give us a call - if you're within 5 years of installation, replacement is covered under our warranty. If you are past 5 years, fan replacement is a straightforward repair.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0113", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "Do I need to retest with a professional test every year after mitigation?", "answer": "Illinois code doesn't require annual retesting - the required post-mitigation test is the one done within 30 days of activation. After that, EPA recommends retesting every 2 years or following any major renovation or sealing work that changes the home's structure. A consumer monitor running continuously gives you ongoing visibility without needing to schedule a new professional test every year. If your monitor's long-term average stays stable and low, you're in good shape. If it starts climbing, that's when to call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0114", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "My fan is making a grinding noise. Is that normal?", "answer": "No - a healthy radon fan is relatively quiet with a low hum. Grinding or rattling noises indicate the motor bearings are wearing out or something is interfering with the impeller. This is an early warning sign that the fan will fail soon. Don't wait for the fan to stop completely - give us a call. If you are within 5 years of installation, fan replacement is covered under our warranty. If you are outside the warranty period, a replacement fan is inexpensive compared to the alternative of the system failing silently and your levels climbing back up.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0115", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "What should I see on my monitor in the first 7 days after installation?", "answer": "In the first 24-48 hours, your 24-hour average should start dropping. By day 3-5, the downward trend should be clear if you're watching the app. The 7-day average will still be dragged up by pre-installation readings - it's a rolling average that includes the whole week. By day 14, the 7-day average should be well below your pre-installation levels. By day 30, you'll have a solid long-term baseline. If the 24-hour average hasn't moved at all after 48 hours, check the manometer and give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0116", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "My neighbor says I should wait a year before retesting after mitigation. Is that right?", "answer": "The required Illinois post-mitigation test must happen within 30 days of activation - not a year. Waiting a year is common as an informal check, but the official documentation for your home is the test done in that first 30-day window. If you are using a consumer monitor, you'll have continuous ongoing readings year-round - no need to wait for a single annual retest. The most useful annual check is just looking at your consumer monitor's long-term average to make sure levels haven't crept up.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0117", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Use After Mitigation", "question": "What happens if I turn off my radon fan for a weekend while we have guests?", "answer": "Don't. The fan should run 24/7 - it's the continuous operation that keeps sub-slab pressure depressurized. Turning it off even briefly allows radon to accumulate under the slab and begin entering the home again. The system uses very little electricity (most fans draw 20-80 watts) and runs quietly. If noise is the concern for guests, the fan can often be relocated or sound-isolated - give us a call and we can discuss options. But turning it off is not the answer.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0118", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "My Airthings Wave isn't syncing to the app - what do I check?", "answer": "First, confirm your phone is within Bluetooth range of the device (within about 30 feet). The Wave series syncs via Bluetooth, not Wi-Fi - the app needs to be open and the phone nearby to pull new data. If you want remote access without having your phone nearby, you'd need to add a View series monitor as a hub.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0119", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Do I need Wi-Fi to use an Airthings monitor?", "answer": "It depends on the model. The Wave Radon and Wave Plus use Bluetooth only - no Wi-Fi needed, but remote access isn't available without a hub. The View Radon and View Plus have built-in Wi-Fi and provide cloud sync and remote access. The Corentium Home 2 is also Bluetooth-only but doesn't require an app - it has a standalone display.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0120", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "My Ecosense EcoQube won't connect to my Wi-Fi. What's the issue?", "answer": "The EcoQube requires a 2.4 GHz network. It won't connect to 5 GHz or 6 GHz networks. If your router combines both bands under one network name, try temporarily disabling 5 GHz band steering during setup, or use a 2.4 GHz SSID if your router creates one. This is a common setup issue with modern mesh Wi-Fi systems.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0121", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "My RadonEye won't connect to Bluetooth - what should I do?", "answer": "Make sure Bluetooth is enabled on your phone, the RadonEye app has Bluetooth permission (check phone app settings), and you're within about 30 feet of the device. Try force-closing the app and reopening. If it still won't pair, power cycle the RadonEye (unplug and replug). The RD200 consumer model works without the app - the OLED display shows current readings independently.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0122", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Does the Airthings app cost money?", "answer": "The Airthings app is free. An Airthings account is also free. Check the current App Store listing for the most up-to-date plan details.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0123", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What is a SmartLink hub and do I need one?", "answer": "Airthings SmartLink is a wireless protocol that lets Wave series monitors connect to a View series monitor as a hub, which then pushes data to the cloud. If you only have a Wave Radon (no hub), you get data when your phone is nearby via Bluetooth. If you add a View Radon or View Plus (USB-powered and Wi-Fi connected), all your Wave devices sync to the cloud and you can check readings remotely. For most homeowners doing post-mitigation monitoring, a standalone Corentium Home 2 (touchscreen display, no hub needed) is simpler.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0124", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "The Airthings app shows my device is \"offline\" even though it's running. Why?", "answer": "For Wave series devices (Bluetooth only): they'll appear offline in the cloud if no hub is connected. The device is still measuring radon - data is stored locally and syncs when your phone is nearby. If you want always-on cloud connectivity, add a View device as a hub.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0125", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What happens if I just ignore the elevated radon?", "answer": "Long-term elevated radon exposure increases the risk of lung cancer over time. There are no immediate symptoms - the risk accumulates silently. Mitigation is a relatively straightforward, one-time fix that significantly reduces that risk. Most systems pay for themselves in peace of mind alone. There's no good reason to ignore a level above 4.0 pCi/L once you know about it.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0126", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "My Ecosense EcoQube went offline after I changed my Wi-Fi password - how do I reconnect it?", "answer": "Open the Ecosense app, find the device, and go through the Wi-Fi setup process again. The EcoQube stores one Wi-Fi network - when you change your password, you need to re-provision it. Follow the setup flow in the app (it will walk you through Bluetooth provisioning to connect to the new network).", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0127", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "The Airthings app shows my device battery is at 100% but it's been 2 years - should I replace the batteries?", "answer": "Battery percentage in the app can sometimes lag or not accurately reflect actual battery condition. If the device is displaying readings normally, it's probably fine. Many Airthings models get 1.5-3 years of actual battery life depending on the model and whether a hub is active. If you start seeing inconsistent readings or the display dims, replace the batteries proactively.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0128", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "My coworker sent me a screenshot of her Airthings app showing 6.8 pCi/L. She has two toddlers.", "answer": "She should act on that. 6.8 pCi/L is well above the EPA action level, and with two toddlers who will be in that home for years, getting it fixed soon is the right move. Mitigation is a one-day installation and brings levels down quickly. Share this with her: call or text Bill at American Radon Systems - we can explain the process, give a sense of cost, and get her on the schedule. No pressure, just a conversation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0129", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "My neighbor showed me their Ecosense app and their basement shows 4.0 pCi/L exactly. Is that the threshold?", "answer": "4.0 pCi/L is exactly the EPA action level - the point at which the EPA says you should fix it. At 4.0, the recommendation is clear. Your neighbor should schedule mitigation. Whether they're at 3.9 or 4.1 doesn't really change the biology - the threshold is a regulatory line, not a biological cliff. At 4.0, the recommendation is to mitigate. Have them give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0130", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Comparisons and Product Choice", "question": "My daughter just texted me that her new Airthings Wave Plus is showing 5.5 pCi/L on the first day. Should she panic?", "answer": "No - the first-day reading on an Airthings is preliminary. Airthings monitors take about 7 days to reach stable accuracy, and day 1 readings can swing significantly above or below the true level. Tell her to let it run for at least 7 days, then check the 7-day average. If that average is consistently above 4.0 pCi/L, then it's time to look into mitigation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0131", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Comparisons and Product Choice", "question": "My consumer monitor reads much higher than the professional test did last month. Which is right?", "answer": "Both can be correct simultaneously for different reasons. Professional tests are run under controlled closed-house conditions at a specific time; consumer monitors show ongoing conditions. If your professional test was done in summer and your monitor is now reading higher in winter, seasonal variation explains the difference. If the test was very recent and the readings differ significantly, check the monitor's placement and let it run another 30 days to see where the long-term average settles.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0132", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Monitor Comparisons and Product Choice", "question": "My sister borrowed a Corentium Home from the library. It showed 5.5 pCi/L over 7 days. Should she trust it?", "answer": "A 7-day reading on a Corentium Home is reasonably reliable - the device is designed for this kind of placement and the 7-day average smooths out short-term fluctuations. 5.5 pCi/L is above the action level. She shouldn't dismiss it. Even so, for an official result she can use for documentation or mitigation planning, a professional test is the next step. Borrowed library kits are a great way to get a first look - but a certified professional test gives her documentation. Have her give us a call and we can walk through what comes next.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0133", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My realtor says I don't need a radon test because the neighborhood averages are low. Is that right?", "answer": "No. Radon levels vary dramatically house to house - even neighboring homes can have very different levels based on foundation type, soil composition, and construction details. Neighborhood or county averages are not a substitute for testing the specific home you're buying. Test the house.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0134", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor's Airthings is showing 5.2 pCi/L - does that mean my house also has high radon?", "answer": "Not necessarily. Radon levels vary significantly from house to house, even neighbors on the same street. Different foundation types, sub-slab conditions, construction details, and ventilation patterns all affect how much radon enters each home. Your neighbor's reading tells you radon is present in the area, but you'd need to test your own home to know your level. An electronic monitor or a professional test are both reasonable options.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0135", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My coworker's Airthings shows 4.1 pCi/L and she has two kids. What should she do?", "answer": "She should take it seriously. 4.1 pCi/L is just above the EPA action level, and with young children in the home, acting on it makes sense. Suggest she check the long-term average to confirm the reading is stable (not just a weather spike). If it holds above 4.0 pCi/L, a mitigation consultation is the right next step. The whole process - site visit, installation, post-test - typically takes a few weeks.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0136", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor just got mitigation done and their radon dropped from 8 to 1.1 pCi/L - that's remarkable. Is that typical?", "answer": "Yes - a drop like that is typical for a well-installed system in a home with good sub-slab conditions. Sub-slab depressurization is highly effective when designed correctly. Most systems bring levels well below 2.0 pCi/L.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0137", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor's Airthings shows 5.2 pCi/L. Does that mean my house is high too?", "answer": "It's a meaningful signal but not a confirm. Radon levels can vary significantly between adjacent homes depending on foundation type, construction details, sub-slab conditions, and how much each home has been air-sealed over the years. A neighbor at 5.2 pCi/L means you're likely in a geologically elevated area - Illinois has many such zones. The right move is to test your own home. If you've never tested, a professional short-term test gives you your specific number. Call or text Bill and we can point you to a licensed tester or discuss mitigation if you already have a high reading.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0138", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My son bought me an Airthings for Christmas. It's showing 3.7 pCi/L. What does that mean?", "answer": "3.7 pCi/L puts you in the \"consider mitigation\" zone - the EPA recommends thinking seriously about mitigation between 2.0 and 4.0 pCi/L, and acting at 4.0 and above. At 3.7, you're close enough to the action level that it's worth a conversation. How long you've lived in the home, how much time you spend on lower floors, and whether there are young children or smokers in the home all factor into the decision. Give us a call - Bill can walk you through whether mitigation makes sense for your situation, no pressure.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0139", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor told me their whole street is in a high-radon zone. Should I automatically test?", "answer": "Yes - test your home regardless. Geologic radon zones give you a regional picture, but individual homes vary significantly. Your neighbor's information means the soil in your area has elevated radon potential, which makes testing important. Don't assume your home is high or low based on the neighborhood - get your specific number. A professional short-term test is the fastest way to find out. Give us a call if you need a referral or want to discuss what the result might mean.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0140", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "We borrowed a monitor from our neighbor. It read 3.8 pCi/L for the first 24 hours. Is that real?", "answer": "The 24-hour reading from a consumer monitor is a reasonable indicator, but it's not a definitive measurement. Consumer monitors reach better accuracy over 7-30 days, and borrowing a monitor that may have been in someone else's home means its calibration and internal settings may not reflect a fresh start. 3.8 pCi/L is in the \"consider mitigation\" range - worth taking seriously. A professional test using a calibrated device under closed conditions would give you a more reliable number. Give us a call and we can talk through the options.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0141", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My son called and said his landlord put a consumer monitor in their apartment and it's showing 4.9 pCi/L. What should he do?", "answer": "He should document the reading - take a photo of the monitor with the reading visible - and send written notice to the landlord requesting mitigation. In Illinois, landlord responsibility for radon varies by lease and local code, but having a documented elevated reading puts the landlord on notice. A consumer monitor reading isn't the same as a professional test, so the landlord could argue that point - but it's a starting place. If the landlord is unresponsive, consulting with a tenant rights organization would be the next step. Happy to answer questions about the mitigation side if it comes to that.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0142", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My friend lives in the same subdivision as me and her radon test came back at 8.0 pCi/L. Should I be scared?", "answer": "Your friend's result is a strong signal to test your own home. Subdivisions built around the same time on similar soil conditions often have comparable radon potential, though individual homes vary. 8.0 pCi/L is well above the action level - your friend should get mitigation done as soon as possible. For you: get a test, and don't wait. It takes 48-96 hours and gives you your specific answer. Give us a call if either of you would like to discuss mitigation options.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0143", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My father-in-law sent me a photo of his radon monitor showing 12.0 pCi/L. He doesn't seem alarmed. What should I say?", "answer": "12.0 pCi/L is three times the EPA action level - that's elevated enough that it warrants prompt action. He should get a mitigation system installed as soon as possible. The fact that he doesn't seem alarmed is common - radon is invisible and causes no symptoms, so it doesn't feel urgent. Framing it as practical rather than frightening is usually most effective: \"Radon is the #1 cause of lung cancer in non-smokers. You have the most fixable version of this problem - a mitigation system costs a few thousand dollars and is done in a day.\" Share our number with him. We're happy to walk him through it.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0144", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor across the street had his radon tested at 6.0 pCi/L. We have the same floor plan.", "answer": "Same floor plan is a meaningful piece of information - it means similar foundation type, construction details, and probably similar sub-slab conditions. That doesn't confirm your levels are the same, but it's a solid reason to test. For homes with identical floor plans in the same neighborhood, when one has elevated radon, adjacent homes with the same construction often have it too. Get a professional test - 48 hours will give you your answer. Give us a call if the results are elevated.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0145", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My HOA sent a letter saying two homes in our neighborhood have \"high radon.\" Should all homeowners test?", "answer": "Yes - an HOA notice like that is a good prompt for every homeowner to test. Two confirmed elevated homes in a neighborhood suggests local geology that affects the area broadly. Each home's results will vary, but given the regional signal, testing is the responsible step. A professional test takes 48-96 hours. If your results are elevated, mitigation solves it. Give us a call if you'd like to understand the testing process or discuss what comes next if your results are high.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0146", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My friend's new house had radon mitigation already installed by the builder. She's wondering if she still needs to test.", "answer": "Yes, she should still test. Builder-installed radon resistant new construction (RRNC) systems are passive - they don't always include a fan. Without a fan, radon can still accumulate. Even with an active fan, she needs her own current reading under her specific living conditions to know whether the system is working for her home. A post-occupancy professional test within the first year is the right move. If levels are still elevated despite the RRNC system, adding or upgrading the fan is straightforward. Have her give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0147", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My aunt lives in a condo on the fourth floor. She has an Airthings showing 1.8 pCi/L. Is she okay?", "answer": "1.8 pCi/L on the fourth floor of a condo is well within normal range - below both the \"consider mitigation\" threshold of 2.0 pCi/L and the national average of 1.3 pCi/L in some regions. Fourth-floor units typically have much lower radon than ground-floor or basement units because they're far from the soil source. Her reading is fine. If she wants to keep monitoring it, the Airthings long-term average is a good ongoing check. No action needed.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0148", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "A Nextdoor post in my neighborhood is asking who has high radon. Should I be testing based on that?", "answer": "Yes - community awareness like that is a useful signal. If multiple neighbors in your area are reporting elevated levels, that's information about your local geology. But your specific home's levels depend on factors unique to your foundation, construction, and sub-slab conditions. A professional test is the only way to know your number. It's inexpensive and fast. Give us a call if you'd like to talk through the testing process or what mitigation involves if your results come back elevated.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0149", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor says they got a radon system and their levels went from 8.5 down to 0.9. Is that realistic?", "answer": "Completely realistic. A well-installed active sub-slab depressurization system can bring homes from high pre-mitigation levels to below 1.0 pCi/L in many cases. The reduction depends on the home's sub-slab conditions and the specific system design, but drops of 80-95% are common. Going from 8.5 to 0.9 is about a 90% reduction - a strong but not unusual result. If your own home has elevated radon, those kinds of results are achievable. Give us a call and we can talk through what's realistic for your specific home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0150", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "I saw on Zillow that a house I'm looking at had a radon test done 6 months ago at 3.0 pCi/L. Is that still valid?", "answer": "6 months old is reasonably current for a general picture, though a lot can change with seasons - a test done in summer may show lower levels than the same home in winter. 3.0 pCi/L is in the \"consider mitigation\" zone. As a buyer, you can request a new test as part of the inspection process. If you want to know current levels under controlled conditions, a fresh professional test is the right call. It's not an expensive or time-consuming ask. Give us a call if you'd like to understand what the process looks like.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0151", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My friend has a RadonEye and it showed 2.1 pCi/L in her basement. She says she's fine. Is she?", "answer": "2.1 pCi/L is in the \"consider mitigation\" zone - the EPA says to think about it between 2.0 and 4.0 pCi/L. It's not a crisis, but it's not nothing. Whether she acts on it depends on how long she plans to stay in the home, whether there are children or smokers, and her own tolerance for long-term low-level risk. The right framing is: \"You're not in danger today, but if you're in this home for 20 more years, this is worth addressing.\" She can get a second opinion with a professional test. If she wants to discuss options, have her give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0152", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My mother called worried because her neighbor had radon levels above 10 pCi/L and got mitigation done. She has never tested.", "answer": "Her neighbor's situation is a strong reason for your mother to test. Levels above 10 pCi/L in a neighboring home suggest local geology that affects the area, and homes with similar construction in the same neighborhood often have comparable potential. A professional short-term test takes 48-96 hours and gives her a specific answer for her home. If levels are elevated, mitigation is a one-day job. Give us a call - we're happy to walk her through the testing and mitigation process, no pressure.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0153", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My monitor shows 6 pCi/L - is my family in danger right now?", "answer": "Radon risk is a long-term exposure issue, not an immediate emergency. A reading of 6 pCi/L that persists over weeks is meaningful and worth fixing - but it doesn't mean your family is in acute danger today. Radon causes lung cancer through years of elevated exposure, not hours or days. Even so, this is above the EPA action level and worth addressing. Call or text Bill and we can talk through getting a mitigation system in place.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0154", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "I have a newborn - do I need to be especially worried about radon?", "answer": "Protecting your home from radon is always worthwhile, especially when young children are involved. Everyone in the home accumulates exposure over time, and children who grow up in a home are there for years. If your radon level is elevated, fixing it now protects your whole family over the long term. Call or text Bill - we can walk through what mitigation would look like for your home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0155", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My wife is pregnant and our monitor shows 4.5 pCi/L. Should we move out?", "answer": "No - you don't need to move out. Radon is a chronic risk, not an acute one. Even so, 4.5 pCi/L is above the EPA action level, and it's worth getting a mitigation system in place. We can typically schedule an installation and have a system running within a week or two. In the meantime, increasing ventilation (opening windows when weather allows) can temporarily reduce indoor levels. Call or text Bill and let's get this taken care of.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0156", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "I don't smoke - should I still worry about radon?", "answer": "Yes. Radon is the leading cause of lung cancer in non-smokers. About 2,900 non-smokers die from radon-related lung cancer each year in the US. The fix is the same regardless of smoking status: a mitigation system to bring levels below the EPA action level. Not smoking is great for your health, but it doesn't make you immune to radon risk.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0157", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "How long does it take for radon to cause harm? (Family, Health Worry, and Past Exposure)", "answer": "Radon-related lung cancer develops over years to decades of elevated exposure - not days or weeks. There are no immediate symptoms. This is what makes radon different from carbon monoxide: you can't feel it in the moment. The health risk is about cumulative lifetime exposure, which is why acting now - even if you've lived with elevated levels for years - still makes a meaningful difference.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0158", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My dad has COPD - is he more at risk from radon?", "answer": "Compromised lung health can affect how the body responds to any lung cancer risk factor, including radon. For someone with existing lung disease, keeping indoor air quality as good as possible - including reducing radon - is a reasonable priority. This is a question worth discussing with your dad's doctor regarding his specific situation. What we can do is bring your radon level down. Give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0159", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "We've been living in this house for 15 years with high radon - is it too late?", "answer": "It's not too late. Reducing your radon level now still reduces your future exposure. Lung cancer from radon develops from cumulative lifetime exposure - the risk grows with continued elevated exposure. Fixing your radon level now means all the future years of living in the house are at a lower risk. It's always worth doing.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0160", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Can radon affect pets? (Family, Health Worry, and Past Exposure)", "answer": "Pets breathe the same air you do. If radon levels are elevated, pets that spend a lot of time in the basement are also exposed. This is less studied than human health impacts, but the physics of radon exposure don't distinguish between species. Fixing elevated radon protects everyone in the home.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0161", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is radon the same as radiation I'd get from an X-ray?", "answer": "No - the mechanism is different. Radon emits alpha particles when it decays. Alpha particles are stopped by a few centimeters of air or a sheet of paper - they can't penetrate your skin from the outside. The concern with radon is breathing air that contains radon and its decay products, which can lodge in lung tissue. X-ray and gamma radiation penetrate from outside. Radon's risk is entirely about inhalation, which is why removing it from the air you breathe is so effective.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0162", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My elderly mother lives in the basement apartment - should I be more concerned?", "answer": "Older adults who spend significant time in a high-radon space accumulate risk just like anyone else. If her living space shows elevated levels, it's worth fixing. A mitigation system installed in the main house also typically reduces basement levels - call Bill to discuss whether her unit's radon profile is covered by the existing system or would benefit from additional work.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0163", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Will opening windows every day fix the radon problem?", "answer": "Ventilation brings radon levels down temporarily, but it's not a lasting solution. Once windows are closed, levels return to baseline within hours. In winter, continuous open-window ventilation isn't practical and has significant energy costs. A mitigation system addresses radon at the source - drawing sub-slab air out before it enters the home - which works around the clock regardless of weather.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0164", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Can radon come through closed windows?", "answer": "Radon doesn't primarily enter through windows. It enters through the foundation - cracks in the slab or foundation walls, the gap around pipe penetrations, the sump pit, and concrete block voids. Closing windows doesn't stop radon entry; it just stops dilution. Sealing entry points can help at the margins, but active sub-slab depressurization (the mitigation system) is the reliable fix.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0165", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My kids play in the basement every day - should I be more concerned about their exposure?", "answer": "It's smart to pay attention to where your family spends the most time. Kids who play in a basement regularly accumulate more exposure-hours there than adults who mainly use it for laundry. If the basement level is elevated, that's a good reason to prioritize mitigation. After a system is installed, kids can go back to using the basement normally.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0166", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "The house I'm buying has an Airthings showing 2.8 pCi/L - should I still get a professional test?", "answer": "For a real estate decision, a professional test is the right tool. A consumer monitor reading can be directionally useful, but it can't satisfy a contingency clause and its placement and calibration aren't verified. Get a certified short-term test done under closed-house conditions to have a definitive number before closing.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0167", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "The seller is showing me an Airthings long-term average of 1.5 pCi/L. Can I trust it?", "answer": "A long-term Airthings average is a real data point - it reflects actual radon levels in the home over an extended period. However, you don't know the monitor's placement, whether it was properly positioned, or if it's been calibrated. It's reasonable context but not a substitute for a professional test for purposes of making a purchase decision. A professional pre-purchase test is a small cost relative to the home purchase.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0168", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Should I ask the seller to do a professional radon test before I make an offer?", "answer": "This is a common practice in Illinois real estate. You can request a test as part of your offer contingency, or arrange and pay for your own test during the inspection period. Buyer-arranged tests give you more control over the testing professional and conditions. If you want a recommendation on finding a licensed tester, call Bill and we can point you in the right direction.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0169", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "I just bought a house with a radon mitigation system already installed. What should I do?", "answer": "Great - that's a good sign. First, ask the seller for the original installation paperwork and any post-mitigation test results. Confirm the system is active (look at the manometer - both columns unequal means the fan is running). Then schedule a new professional test under your ownership - conditions may have changed since the seller's test. Place a consumer monitor in the basement for ongoing tracking.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0170", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My RadonEye is showing \"LO\" - what does that mean?", "answer": "\"LO\" on the RadonEye OLED display typically means the reading is below the minimum detectable range, or the device is still in its initial warmup period. Let it run for at least an hour before the display settles on a numerical reading. If it continues showing \"LO\" after an hour, confirm the device is powered (the 12V adapter is connected) and the air inlet isn't blocked.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0171", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Does Illinois require mitigation for new construction?", "answer": "Yes - Illinois § 422.160 requires new residential construction to include either a passive (rough-in) or active radon control system. Active systems have a fan and are considered complete mitigation; passive systems create a path for radon to vent but may not be as effective without a fan. If you are in a newer home with a passive rough-in, adding a fan is a relatively low-cost upgrade.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0172", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "What is the Illinois radon code for existing homes?", "answer": "32 Ill. Adm. Code Part 422, Section 422.150 governs radon mitigation in existing residential housing. It specifies requirements for pipe material (Schedule 40 PVC), minimum pipe diameter (3 inches), post-mitigation test timing (24 hours to 30 days), and requires that the test be performed by an independent licensed measurement professional.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0173", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "I'm renting a ground-floor apartment and I'm worried about radon. Can I test without my landlord knowing?", "answer": "Yes - a consumer radon monitor is a personal air quality device you can use in any space you occupy. Placing one on a countertop or bookshelf is no different from a thermometer. If the monitor shows elevated levels, you'd want to share that information with your landlord regardless.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0174", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My landlord says the building was built in 2010 and doesn't have a radon problem. Should I believe that?", "answer": "Building age doesn't determine radon levels. Radon depends on the local soil, foundation type, and construction details - not the year it was built. A newer home can have high radon; an older home can have low radon. If you are concerned, test the space yourself with a consumer monitor.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0175", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "The house I'm buying already has a mitigation system. What should I verify?", "answer": "Ask for: (1) the installation company's name and license number, (2) the installation date and scope, (3) the original post-mitigation test result, and (4) any subsequent test results. When you move in, get your own professional test to establish your baseline under your ownership. Check that the fan is running (look at the manometer) and ask about the fan's warranty.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0176", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "I bought a house 3 months ago and never tested for radon. When should I test?", "answer": "Now. You can do a professional short-term test (2-7 days) or use a consumer monitor for a longer-term reading. If you haven't tested yet, place a consumer monitor in the basement today. If the reading is consistently above 4.0 pCi/L, schedule a professional test and call Bill for a site assessment.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0177", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "What exactly does a radon mitigation system do? (Family, Health Worry, and Past Exposure)", "answer": "A sub-slab depressurization system - the most common type - draws air from beneath your foundation slab using a continuously running fan. This creates negative pressure under the slab that prevents radon from being pushed into the home by the natural pressure differential. The radon-laden air is routed up a pipe and exhausted outside above the roofline, where it disperses harmlessly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0178", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "How long does it take to install a radon mitigation system?", "answer": "Most installations are completed in one day. Bill does a site visit first to assess your home's sub-slab conditions and plan the system. Installation typically involves drilling a suction point through the slab, installing pipe routed to the attic or exterior, mounting the fan, and sealing any major radon entry points. The fan is plugged in at the end and the system is running the same day.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0179", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Does the mitigation system need regular maintenance?", "answer": "The system is designed to run without active maintenance. The main check is the manometer (U-tube gauge) - make sure both sides aren't equal (which would mean the fan is off). Listen periodically for the fan running quietly. Every few years, a professional can verify the system is still depressurizing effectively, especially if you see your radon level rising. Fan replacement is covered by our 5-year warranty.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0180", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My system has been running for three years and my fan seems to be running louder than before - what does that mean?", "answer": "Increasing fan noise can indicate bearing wear or debris in the fan housing. After several years of continuous operation, fans may develop bearing wear. If the noise is significantly louder than before, call Bill - this is covered under our 5-year warranty during that period, and we can assess whether the fan needs replacement.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0181", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is there anything I can do right now to reduce radon while I wait for the mitigation system?", "answer": "Yes - increasing ventilation while the weather allows (opening windows and doors when practical) will temporarily reduce indoor radon levels. However, this only works while windows are open and has significant energy costs in cold weather. It's a short-term measure. The mitigation system is the durable fix.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0182", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My doctor told me my lung cancer was caused by radon. What should I do about my house?", "answer": "We're very sorry to hear that. Getting your home mitigated protects the other people living there, and that's the right next step. Call or text Bill - we can prioritize your situation and get you scheduled quickly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0183", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Can radon affect me if I work from home in the basement?", "answer": "Yes - people who spend more hours per day in a high-radon space accumulate more exposure over time. If your home office is in the basement and you're working there 8+ hours a day, your total radon exposure is significantly higher than someone who only uses the basement occasionally. This is a good reason to mitigate promptly if basement levels are elevated.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0184", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My teenage son spends all day in the basement gaming. Should I be worried about his radon exposure?", "answer": "A teenager spending 8-10 hours a day in an elevated-radon basement is accumulating meaningful exposure over years. It's a genuine reason to prioritize mitigation. The good news: the fix is effective and typically brings levels down quickly. Give Bill a call so we can get this taken care of.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0185", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is there a test I can take to see if I've been harmed by radon exposure?", "answer": "There is no blood test, urine test, or medical scan that directly measures past radon exposure or detects early radon-related lung cancer before symptoms appear. Lung cancer screening (low-dose CT scan) is available for high-risk individuals - talk to your doctor about whether you qualify based on age, smoking history, and radon exposure history. We can tell you your home's radon level; your doctor can advise on any health screening that's appropriate for you.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0186", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My wife has asthma - does that put her at higher risk from radon?", "answer": "Radon primarily causes lung cancer; asthma is a different condition affecting airway inflammation. There's no established direct link between asthma and increased radon sensitivity. Even so, any homeowner with existing respiratory conditions has additional reason to maintain good indoor air quality overall. Reducing radon is a worthwhile component of that.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0187", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "We're planning to have a baby in a year - is it worth mitigating now even though she's not born yet?", "answer": "Absolutely. Mitigation now means your home is ready when your family grows. A baby sleeping in a home with a properly installed mitigation system is protected from day one. The installation is easier to plan and schedule before a baby arrives than after.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0188", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "I just moved in and want to check the radon level before deciding on mitigation - is a consumer monitor enough to make that decision?", "answer": "A consumer monitor can give you directional information - if it shows a consistent 30-day average above 4.0 pCi/L, that's actionable. For a formal mitigation decision (and especially for post-mitigation documentation), a professional test is the appropriate tool. But if you want to check what's happening in your home before calling anyone, starting with a consumer monitor is perfectly reasonable.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0189", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is 5 pCi/L dangerous if you only spend 4 hours a day in the basement?", "answer": "Risk is proportional to exposure - concentration × time. Four hours per day at 5 pCi/L is meaningfully lower cumulative exposure than 16 hours per day at 5 pCi/L, but it's still above the EPA action level and accumulates over years. Mitigation eliminates the concern regardless of how much time is spent there, and levels on upper floors will also decrease modestly after mitigation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0190", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My son's bedroom is in the basement. Our radon level is 4.5 pCi/L. How worried should I be?", "answer": "4.5 pCi/L is above the EPA action level of 4.0 pCi/L, and a basement bedroom means your son is spending 8+ hours a night in the highest-radon space in the home. Radon risk is a function of concentration times time - a bedroom is one of the highest-exposure scenarios because of how long someone sleeps there. The good news is this is fixable. A mitigation system typically brings levels well below 2.0 pCi/L, and the system runs continuously so the result is designed to keep running continuously. Give us a call and we can walk you through what a system would look like for your home - no pressure, just information.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0191", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "We have an 8-month-old baby. Our basement radon test came back at 5.2 pCi/L. Is this an emergency?", "answer": "It's not an emergency in the sense that you need to leave your home tonight - but it is something you should take care of promptly. Radon risk builds over years of exposure, not hours, so a few weeks while you arrange mitigation isn't cause for panic. Even so, 5.2 pCi/L is meaningfully above the EPA action level, and if your baby's nursery is on an upper floor rather than the basement, the levels there may be lower. The practical step is to get a mitigation system installed soon - it's a one-day job and brings levels down right away. Call or text Bill and we can usually get on the schedule within a week or two.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0192", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My kids play in the basement 2-3 hours per day. We don't sleep down there. Does that matter?", "answer": "Yes, it matters, though it's a lower-exposure situation than a basement bedroom. Radon exposure adds up over time - 2-3 hours per day is roughly 700-900 hours per year of exposure in the highest-concentration area of the home. If your basement level is at or above 4.0 pCi/L, that's still a meaningful annual dose. Below 2.0 pCi/L, the risk drops significantly. If you haven't tested, a professional test will give you the number you need to make a real decision. Happy to answer questions once you have a reading - or call Bill and we can talk it through.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0193", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My elderly mother has never tested her home. She's 78 and has been there 30 years.", "answer": "Testing is still worth doing. If her levels are elevated, a mitigation system can reduce her ongoing exposure starting the day it's installed - future exposure matters even at 78. And if she plans to sell the home, a test and mitigation report can be useful documentation for buyers. A short-term professional test takes about 48 hours and is inexpensive. If it comes back elevated, a system is a one-day installation. Reach out to Bill and we can help figure out the right approach for her situation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0194", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My husband smokes. Is the radon risk worse for him than for the rest of us?", "answer": "Yes - significantly. Radon and smoking together dramatically multiply lung cancer risk. EPA risk tables show that radon risk is much higher for smokers than for people who have never smoked. This happens because radon's decay products attach to the particulates from cigarette smoke and are more easily deposited deep in lung tissue. If your husband smokes and your home has elevated radon, mitigation is genuinely high-priority for his health. Give us a call and we can talk through what a system would involve.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0195", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My daughter is pregnant and she lives in the basement apartment of our split-level. What do I tell her?", "answer": "Tell her the reading matters and it's worth getting a test right away if she hasn't already. Basement apartments tend to have the highest radon levels in a home, and pregnant women want to minimize any avoidable health risks. Radon concern is mainly long-term lung cancer risk from sustained elevated exposure; for pregnancy-specific health questions, talk with a medical professional. Even so, if the reading is above 4.0 pCi/L, getting it fixed is the right move regardless. A mitigation system works for basement apartments the same way it works for full homes. Call or text Bill and we can talk through what's involved.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0196", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Our daycare is in our basement. Do we need a special kind of radon test?", "answer": "The same professional short-term test used for homes works for a basement daycare space. The test device is placed in the basement for 48-96 hours under closed conditions, then mailed to a lab. Illinois licensed measurement professionals perform these tests. If levels come back elevated, mitigation is the same process as any residential installation - and it's especially worth addressing given how many children spend time there. Call us and we can point you in the right direction on testing if you need a referral, or discuss what mitigation would look like for the space.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0197", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My daughter-in-law says radon is basically a scam. How do I explain the risk without being alarmist?", "answer": "The simplest way to frame it: the EPA identifies radon as the second leading cause of lung cancer in the United States and the leading cause among people who have never smoked. It's not controversial science - it's been studied for decades and is recognized by the EPA, CDC, WHO, and the American Cancer Society. The skepticism usually comes from the fact that radon is invisible, odorless, and you can't feel it - it doesn't cause symptoms while it's doing damage. A test is inexpensive and either confirms the concern or rules it out. If she's open to \"let's just check,\" that's usually the most productive path. Happy to answer any questions she has directly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0198", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is the risk worse for children than for adults?", "answer": "Children who grow up in a high-radon home accumulate more total exposure years than adults who move in later - that's the most meaningful sense in which children are at higher risk. A child who spends their first 18 years in a home with 6 pCi/L accumulates far more lifetime exposure than a 45-year-old who moves in for 10 years. Some research also suggests children's lungs may be more sensitive to radiation damage because they're still developing. The practical takeaway is the same either way: if the home has elevated radon, fix it - it protects everyone and the cost is the same regardless. Give us a call to talk through what mitigation involves.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0199", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "We've lived here 15 years with radon levels we never knew about. What did we do to our kids?", "answer": "This is one of the hardest questions people ask, and the honest answer is: the risk is real but it's probabilistic, not certain. Radon increases lung cancer risk over time - it doesn't cause it in every case. Fifteen years at elevated levels is meaningful exposure, but most people who live with elevated radon don't develop lung cancer. The most important thing now is to get a system installed so future exposure stops, and to make sure no one in the family smokes (which multiplies the risk significantly). For medical concerns, talk with your doctor. From the home side, the practical step is reducing future exposure. What you can control now is fixing it going forward. Call Bill and we can get that taken care of.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0200", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My toddler spends most of the day playing in our finished basement. Our level is 3.5 pCi/L.", "answer": "3.5 pCi/L puts you in what the EPA calls the \"consider mitigation\" zone - below the 4.0 action level but above the point where the EPA says to think about it seriously. For a toddler spending most of the day in the basement, the time-of-exposure factor is real. Mitigation systems work just as well at 3.5 as at 6.0, and the cost is the same. Many families in your situation decide to go ahead and fix it for peace of mind. Give us a call and we can talk through whether it makes sense for your home - no obligation, just a conversation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0201", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "We just found out my 10-year-old has been sleeping in the basement bedroom for 5 years. The level is 6.8 pCi/L.", "answer": "6.8 pCi/L is well above the EPA action level, and a basement bedroom is one of the highest-exposure situations. It's understandable to feel alarmed, but the most useful thing to do right now is get a mitigation system installed so the exposure stops. There's there is no simple home test that can tell you what past radon exposure did - the risk is probabilistic and unfolds over decades, not immediately. Getting it fixed now meaningfully reduces any future risk. Don't let guilt about the past paralyze action on the present. Call or text Bill and we can get a system in quickly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0202", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My teenage daughter's bedroom is in the basement. Should I move her upstairs first before getting mitigation?", "answer": "Moving her temporarily is a reasonable precaution if your level is well above the action level (say, above 8 pCi/L) and you're waiting on a mitigation appointment. For levels in the 4-6 range, the incremental risk over a few weeks of waiting is small - it's accumulated years of exposure that matter, not a few extra weeks. Mitigation can usually be scheduled within 1-2 weeks. If it gives you peace of mind to have her sleep upstairs in the interim, there's no harm in it. Give us a call and we can often get on the schedule quickly.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0203", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "I'm pregnant. We just got a test back showing 4.8 pCi/L in our basement. The nursery is on the second floor.", "answer": "The good news is the nursery is on the second floor where radon levels will be meaningfully lower than the basement. Radon concentrations drop on upper floors because the source is the soil below, and the gas dilutes as it moves up through the home. Even so, 4.8 pCi/L in the basement means your overall home has a radon issue worth addressing. Getting mitigation installed before the baby arrives is a good goal - it's a one-day job and the system starts working immediately. Call Bill and we can work to fit your timeline.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0204", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My infant's crib is on the first floor directly above our basement. The basement is 5.5 pCi/L. What are first-floor levels typically?", "answer": "First-floor levels are typically 40-60% lower than basement levels in a home with active radon. So if your basement is 5.5 pCi/L, a rough estimate for the first floor might be 2-3 pCi/L - though this varies by home construction, insulation, and ventilation. That's still in the \"consider mitigation\" range. The only way to know for sure is to test the first floor directly, or install mitigation (which addresses the source and lowers levels throughout the home). Give us a call and we can help you think through the testing approach.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0205", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My elderly father refuses to get his house tested. He says he's lived there 40 years and he's fine.", "answer": "The 40-years-and-fine argument is genuinely hard to counter without being alarmist - and he may be right if his levels are low. What usually works is reframing it: \"A test just tells us the number. If it's low, great, you were right all along. If it's high, we know. Either way it takes 48 hours and then we know.\" If he'd be willing to let you place a test kit, that's the path. If levels come back elevated, that becomes a more factual conversation. Happy to talk through how to approach it with him if that would help - give us a call.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0206", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My wife has asthma. Does that make her more vulnerable to radon?", "answer": "Asthma affects the airways and increases sensitivity to irritants, but the mechanism of radon damage is different - it's ionizing radiation that damages lung cells over time, not an irritant response. Radon risk is the same for someone with asthma as for someone without it. However, people with asthma already have compromised lung health, which makes protecting lung tissue from additional long-term damage even more important. The case for mitigation is the same, just with added weight given her existing condition. Give us a call if you'd like to talk through options.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0207", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My father-in-law died of lung cancer and never smoked. He lived in his house for 35 years. Should we get our house tested?", "answer": "Yes, absolutely - testing makes sense in your situation. Lung cancer in a non-smoker who lived in the same area for decades is one of the patterns that raises the question of radon exposure. Whether or not radon was involved in his case, the right move is to test your own home and know your number. If it comes back elevated, mitigation is a straightforward fix. If it comes back low, you can stop wondering. Either way you'll have information. Give us a call if you'd like to talk through the testing process.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0208", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "We have a baby and a 4-year-old. Our radon is 3.8 pCi/L. Is that close enough to 4.0 to justify mitigation?", "answer": "Many families with young children in your situation decide yes. The EPA's \"consider mitigation\" zone starts at 2.0 pCi/L specifically because the risk below 4.0 isn't zero - it's just lower. At 3.8 with two young children who'll be in the home for years, the math often lands on \"worth it.\" Mitigation systems work just as effectively at 3.8 as at higher levels. The system also gives you long-term peace of mind and adds value to the home. Call Bill and we can talk through whether it makes sense for your specific situation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0209", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My wife is pregnant and our Airthings shows 4.1 pCi/L on the first floor. Should we be worried?", "answer": "4.1 pCi/L on the first floor is above the EPA action level - which means your basement levels are likely higher. Getting mitigation done before the baby arrives is a reasonable goal, and it's a one-day installation. Radon's primary risk is lung cancer from long-term exposure, not an acute risk during pregnancy, so a few weeks while you arrange mitigation isn't a crisis. But there's no reason to wait longer than necessary. Call Bill and we can work to fit your schedule.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0210", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My child has had several respiratory infections. Could radon be contributing?", "answer": "Radon doesn't cause respiratory infections - those are from viruses and bacteria. Radon's health effect is specifically lung cancer from long-term radiation exposure, not immune suppression or susceptibility to infections. If your child is having frequent respiratory issues, that's a conversation to have with their pediatrician. Even so, if you have elevated radon in the home, mitigating it is a good move for long-term lung health regardless of the infection question. Give us a call if you'd like to discuss testing or mitigation.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0211", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is it worth getting mitigation if we're planning to sell the home in 2-3 years?", "answer": "Yes - for two reasons. First, you and your family continue to live in the home for 2-3 years, and lower radon levels benefit everyone there. Second, a mitigation system with a clean post-mitigation test report is a selling asset. Buyers increasingly ask about radon, and a documented, professionally installed system is a much cleaner transaction than a mid-sale remediation request. Most buyers' agents see mitigation as a positive. Give us a call and we can talk through the installation and what documentation we provide.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0212", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Family, Health Worry, and Past Exposure", "question": "We just had twins. Our basement radon is 4.6 pCi/L. The nursery is upstairs but we spend time in the basement.", "answer": "Getting mitigation done soon makes sense given the reading and the new babies. The nursery upstairs will have lower levels, which is good, but any time you or your babies spend in the basement (laundry, play area, guests) is at the higher concentration. 4.6 pCi/L is above the action level and the fix is straightforward. A mitigation system installs in a day and starts lowering levels immediately. Give us a call and we can get you on the schedule.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0213", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "My home inspector used a RadonEye and it showed 4.2 pCi/L. Does that count as an official radon test?", "answer": "It depends on the inspector's credentials. To count as an official radon test for real estate purposes in Illinois, the test must be conducted by a licensed radon measurement professional using a properly calibrated device under closed-building conditions. If your inspector is licensed for radon measurement and followed the protocol, the test may count. If they just had a consumer-grade RadonEye with them and dropped it in the basement for 2 hours, that doesn't meet the standard. Ask the inspector for their Illinois radon measurement license number and the test protocol they used. When in doubt, get a proper test done - call us if you need a referral.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0214", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "The listing says \"radon mitigation system installed.\" Do I still need to test?", "answer": "Yes. A mitigation system being present tells you the sellers were aware of a radon problem and addressed it - but it doesn't tell you whether the system is currently working or what levels are today. The fan could have failed. The pipe could be disconnected. Without a current post-mitigation test, you don't know what the levels are. Request a test as part of your inspection contingency. If there's a system in place and it's working, you should see levels well below the action level - good documentation for your purchase. Give us a call if you need help evaluating an existing system.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0215", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "What kind of radon test do I need for a real estate transaction in Illinois?", "answer": "Illinois requires a 48-hour minimum short-term test conducted by a state licensed radon measurement professional. The home must be in closed-building conditions for at least 12 hours before the test begins and throughout the test period. The device is typically an alpha track or electret ion chamber device placed in the lowest livable area of the home. Results are analyzed in an accredited lab and the tester provides a written report. DIY charcoal canisters from a hardware store don't meet the standard for a formal real estate transaction. Give us a call if you need a referral to a measurement professional.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0216", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "The seller's radon test was done 3 years ago and came back at 2.1. Do I need a new test?", "answer": "You should get a new test. Radon levels change over time as homes settle, sump pits age, and foundation conditions shift. A 3-year-old test is stale - it doesn't reflect current conditions. A 2.1 pCi/L result 3 years ago could be different today. For a home purchase, current information protects you. A new 48-hour test is inexpensive and gives you a current reading you can actually rely on. Give us a call if you need a referral.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0217", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "I'm buying a new construction home. Does it need a radon test?", "answer": "Yes - new homes can absolutely have elevated radon. In fact, new homes are often tighter than older homes, which can mean radon accumulates more. Many new homes in Illinois are built with radon-resistant new construction (RRNC) features (a passive subslab layer and a vertical pipe stub-out ready for a fan), but these features don't confirm low radon. A test after occupancy will tell you the real number. If levels are elevated, a fan can be added to the existing RRNC stub-out quickly and inexpensively. Give us a call if you're moving into a new home and want to test.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0218", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "What does it mean when a listing says \"radon system in place, never tested\"?", "answer": "It means someone installed a mitigation system at some point but there's no documentation that it worked. This is a significant gap. You don't know if the system was properly installed, what the pre-mitigation level was, whether the fan is currently functioning, or whether levels are actually below the action level today. Request a current test as part of your contingency. If the system is working, a current test should show low levels and give you something to rely on. If the system isn't working, you want to know before you close.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0219", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "How do I explain radon to a first-time buyer who has never heard of it?", "answer": "Keep it simple: radon is a naturally-occurring gas that comes from soil, it can accumulate in homes, and it's the leading cause of lung cancer in non-smokers. A test shows whether it's a problem, and a mitigation system fixes it if it is. The good news is it's not a deal-breaker - it's a known issue with a known fix. Most buyers just want to know the number and understand what the options are. If it comes up, encourage them to test and understand the result before panicking or walking. Happy to answer buyer questions directly - call or text Bill.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-answered-phase-3-clean-answered-qas-0220", "phase": "phase3", "type": "answered_qna", "topic": "answered-phase-3-clean-answered-qas", "category": "answered-phase-3-clean-answered-qas", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "My home inspector mentioned radon but didn't do a test. Is that normal?", "answer": "Yes - home inspectors typically note that radon testing is recommended and refer out to a licensed measurement professional, rather than doing the test themselves. General home inspectors aren't usually licensed for radon measurement, so they don't include it in the standard inspection. If your inspector mentioned radon, take it seriously and schedule a separate professional radon test before closing. Give us a call if you need a referral.", "source": "cleaned-master/02-existing-and-recovered-answered-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "answered-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0002", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "How do I set up a RadonEye RD200?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0003", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Does the RadonEye RD200 have an app?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0004", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "What is the RadonEye Plus and how is it different from the RD200?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0005", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Does the RadonEye Plus connect to Wi-Fi?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0007", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "What app does RadonEye use?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0008", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Can I see my RadonEye history on my phone?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0009", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "How far does RadonEye Bluetooth reach?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0010", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Can I use RadonEye without a smartphone?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0011", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Does RadonEye store data internally when not connected to a phone?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0012", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "How do I export RadonEye data?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0013", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "What is the RadonEye display showing me?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0014", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Does the RadonEye have a built-in screen?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0015", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "What does the RadonEye number on the display represent - current or average?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0016", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "How accurate is the RadonEye RD200 for home monitoring?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0017", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Is the RadonEye more accurate than the Airthings Wave?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0018", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Why does RadonEye respond faster than some other monitors?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0019", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Is RadonEye used by professional radon inspectors?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0020", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Some home inspectors use a RadonEye - is that a professional device or a consumer device?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0021", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Does the RadonEye meet AARST standards for real estate testing?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0022", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "My inspector used a RadonEye for the real estate test. Is that valid in Illinois?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0023", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Can RadonEye readings be used for official post-mitigation testing?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0024", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "How do I set the alarm on a RadonEye?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0025", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "At what level does the RadonEye alarm sound?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0026", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "What kind of batteries does the RadonEye use?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0027", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "How long does the RadonEye battery last?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0028", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Can the RadonEye be plugged in instead of using batteries?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0029", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "My RadonEye display shows a number I don't understand. What do the digits mean?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0030", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "My RadonEye reading just jumped significantly. Is that normal?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0031", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "How long should I run the RadonEye before trusting the reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0032", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Is the RadonEye reading a real-time number or a rolling average?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0033", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "My RadonEye says 4.0 pCi/L. What does that mean?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0034", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "Can I use RadonEye to verify that my radon mitigation system is working?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0035", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "RadonEye-Specific Questions", "question": "How is RadonEye different from a charcoal canister radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0036", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "What is a SafetySiren radon detector?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0037", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "Is SafetySiren a good radon monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0038", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "Who makes the SafetySiren radon detector?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0039", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "What is the difference between the SafetySiren Pro3+ and the Pro4?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0041", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "Can I check my SafetySiren reading from my phone?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0042", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "How does the SafetySiren display work?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0043", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "What does the SafetySiren alarm sound like?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0044", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "Does the SafetySiren have a continuous alarm or a single beep?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0045", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "At what radon level does SafetySiren alarm?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0046", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "Does SafetySiren plug into the wall?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0049", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "Is SafetySiren good for people who don't use smartphones?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0050", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "My SafetySiren is beeping. What do I do?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0051", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "How do I silence the SafetySiren alarm?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0052", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "How accurate is the SafetySiren compared to other consumer monitors?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0053", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "Can SafetySiren be used for real estate testing?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0055", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "Is SafetySiren still made and supported?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0056", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "Where can I buy a replacement SafetySiren?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0057", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "SafetySiren-Specific Questions", "question": "My SafetySiren is old - is the reading still reliable?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0058", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "What is the EcoQube Flex?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0059", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "How is the EcoQube Flex different from the original EcoQube?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0060", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Is the EcoQube Flex portable?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0061", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Does the EcoQube Flex run on batteries?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0062", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Can I use the EcoQube Flex to test in multiple rooms?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0063", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "How do I use the EcoQube Flex app?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0064", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Does the EcoQube Flex work without Wi-Fi?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0065", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "How long does it take the EcoQube Flex to give a reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0066", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Is the EcoQube Flex more accurate than the standard EcoQube?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0067", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "What sensor type does the EcoQube Flex use?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0068", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Can the EcoQube Flex detect radon spikes quickly?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0069", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Is the EcoQube Flex used by professional radon testers?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0070", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Does the EcoQube Flex store historical data?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0071", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "How do I export EcoQube Flex data?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0072", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Is the EcoQube Flex good for post-mitigation monitoring?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0073", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "My EcoQube Flex reading is different from my Airthings. Which is correct?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0074", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Can I use the EcoQube Flex for a real estate radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0075", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Does the EcoQube Flex connect to the same app as the standard EcoQube?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0076", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "How do I reset or recalibrate the EcoQube Flex?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0077", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Where does Ecosense say to place the EcoQube Flex?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0078", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Ecosense EcoQube Flex-Specific Questions", "question": "Is Ecosense a US company?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0079", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "My home has a crawlspace, not a basement. Where do I put the radon monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0080", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "How do I test radon in a crawlspace?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0082", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "Do I need to enter the crawlspace to test it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0083", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "My crawlspace has a vented design. Does that mean radon isn't a concern?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0084", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "What is a vented crawlspace and does it reduce radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0085", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "What is an unvented or encapsulated crawlspace and does it have higher radon risk?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0086", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "My home has an encapsulated crawlspace. Does that mean radon is trapped?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0087", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "Where should I put a radon monitor in a house with a crawlspace instead of a basement?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0088", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "My house is on a concrete slab. Where do I put the radon monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0089", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "Do slab-on-grade homes have lower radon than homes with basements?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0091", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "I live in a ranch house with no basement. Is radon still a concern?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0092", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "My house has a slab foundation. What is the lowest floor I can test on?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0093", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "I have a raised foundation (pier and beam). Where should I test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0094", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "My house is built over a crawlspace with no access door. How do I test that area?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0096", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "Which level of a split-level home has the highest radon risk?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0097", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "I live in a townhouse. Is radon a concern for middle units that don't touch the ground?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0098", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "Does a shared wall in a townhouse or row house affect radon levels?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0099", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "I live in a row house attached on both sides. Do I still need to test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0100", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "My home is a mobile or manufactured home. Can it have elevated radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0101", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "How does radon enter a mobile home?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0102", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "Where do I place a radon monitor in a mobile home?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0103", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "Can radon levels in mobile homes be mitigated?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0104", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "My house has a partially-finished basement. Where should I test - finished or unfinished side?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0105", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "Does finishing a basement increase or decrease radon levels?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0106", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Crawlspace, Slab, and No-Basement Home Questions", "question": "My unfinished basement has exposed concrete floors and block walls. Is that a higher radon risk?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0107", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "Can I have elevated radon in an apartment?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0108", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "Does radon affect high-rise apartment buildings?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0109", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "How high up does radon typically reach in a multi-story building?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0110", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "I live on the 3rd floor of an apartment building. Should I worry about radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0111", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "I live on the ground floor of a condo building. Should I test for radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0112", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "Can I buy a radon monitor and use it in my apartment?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0113", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "My apartment lease says I can't make modifications. Can I still place a radon monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0114", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "I live in a basement apartment. What is my radon risk?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0115", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "Basement apartments have the highest radon risk of any apartment unit, right?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0116", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "My basement apartment has small windows near the ceiling. Does ventilation help with radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0117", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "Who is responsible for radon testing in a condo - me or the HOA?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0118", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "Does my condo association have any obligation to test common areas for radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0119", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "My HOA says radon is my personal problem. Is that correct?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0120", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "I own a condo on the ground floor. Is the radon risk higher than upper floors?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0121", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "Can radon from a lower condo unit affect the condo above it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0122", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "My building manager says radon doesn't affect multi-unit buildings. Is that accurate?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0123", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "I'm renting a garden-level apartment. How do I talk to my landlord about radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0124", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "My apartment is below grade on one side but above grade on the other. What is my radon exposure?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0125", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "I live in a converted basement unit. The previous use was storage. Does that affect radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0126", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "I'm moving into a basement unit and want to test before signing. Is that reasonable?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0127", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "What type of radon test makes sense for an apartment or condo?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0128", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Multi-Unit, Apartment, and Rental Questions", "question": "Can a tenant request that a landlord test for radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0129", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "How long should I run my consumer monitor before trusting the post-mitigation reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0130", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "My radon went UP the first two days after mitigation was installed. Is that normal?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0131", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "What is a realistic radon level to expect after mitigation?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0132", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "Is 1.0 pCi/L a typical post-mitigation result?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0133", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "What if my post-mitigation reading is still 2.5 pCi/L? Is the system underperforming?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0134", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "I have two radon monitors in my basement and they're giving me different readings. Which one is right for post-mitigation?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0135", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "After mitigation, do I still need to run closed-building conditions for my consumer monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0136", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "My mitigation has been running for 3 days and my Airthings is still at 4.0 pCi/L. Should I be worried?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0137", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "How long does it take for radon to fully drop after a mitigation system starts?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0138", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "My radon dropped after mitigation but then slowly crept back up over weeks. What is happening?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0139", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "Seasonal swings - does my mitigation system work less well in certain seasons?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0140", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "Should my post-mitigation consumer monitor readings be lower in summer than winter?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0141", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "When should I get my next official professional test after mitigation?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0142", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "If my consumer monitor says I'm good, do I still need professional retesting each year?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0143", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "I have a mitigation system installed but I've never done a post-mitigation professional test. Is that a problem?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0144", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "My fan is running but the manometer gauge shows almost no difference between the two sides. What does that mean?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0145", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "I can hear my radon fan running but I see no change in my consumer monitor reading. Is the system working?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0146", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "My mitigation contractor said to wait 30 days before testing. My consumer monitor looks fine after 10 days. Can I trust it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0147", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "The mitigation company said radon would drop to \"near zero.\" My monitor says 0.6 pCi/L. Is that near zero?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0148", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "My post-mitigation test was 2.8 pCi/L and I was hoping for lower. Is that acceptable?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0149", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "My mitigation fan is getting louder over time. Does that mean it's working harder or failing?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0150", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "After-Mitigation Monitoring - Additional Questions", "question": "Do mitigation systems require any maintenance or do they just run?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0151", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "What is radon-resistant new construction (RRNC)?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0152", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "My new home has an RRNC stub-out - what does that mean?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0153", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "Is a passive RRNC system enough, or do I need a fan?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0154", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "My builder says the home has radon-resistant features. Do I still need to test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0155", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "Does a home with RRNC features have lower radon than an older home?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0156", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "When should I test for radon in a newly built home?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0157", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "My builder says radon isn't an issue in new construction. Is that accurate?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0159", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "The stub-out in my new home is just a capped pipe. Does it actually do anything?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0160", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "Can I activate the passive RRNC system myself by adding a fan?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0161", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "Does RRNC certification mean the home will test below 4.0 pCi/L?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0162", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "I bought a home that was marketed as \"radon-resistant.\" It just tested at 4.5 pCi/L. How is that possible?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0163", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "If my new home has RRNC, is the testing window different?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0164", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "Who should I call to activate an RRNC system after I move in?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0165", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "Is RRNC required by code in Illinois?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0166", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "My new home warranty - does it cover radon issues?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0167", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "New Construction and RRNC Questions", "question": "If I'm building a new home, should I ask the builder for RRNC features?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0169", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "Does closing the house in winter concentrate radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0170", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "Is a winter radon test more accurate than a summer one?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0171", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "My radon was low in summer and high in winter - which reading is more representative?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0172", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "Does barometric pressure affect radon levels?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0174", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "My radon went up significantly during a storm. Is that a real spike or a measurement artifact?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0175", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "Does snow on the ground affect radon levels?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0176", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "Does frozen ground change how radon enters a home?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0177", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "How does my furnace affect radon levels?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0178", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "Does running the furnace fan continuously lower radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0179", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "My whole-house fan pulls air up through the house - does that change basement radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0180", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "Can running an HRV or ERV lower radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0181", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "Does an Energy Recovery Ventilator help with radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0182", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "What effect does a dehumidifier have on radon levels?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0183", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "Can a basement dehumidifier make radon worse by pulling more air from the ground?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0184", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "My air conditioning runs the house very tight - does that trap radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0185", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "Does radon build up at night when the house is closed and everyone is sleeping?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0186", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "I open my windows every day in summer - does that keep radon low?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0187", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "The windows in my basement don't open. Is that a radon risk factor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0188", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "I have a wood stove in my basement. Does combustion affect radon readings?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0189", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "My house has a fireplace. Does using it affect radon levels?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0190", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Seasonal, Weather, and Environmental Effect Questions", "question": "My basement sump pit lid is cracked. Could that be making my radon reading worse?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0192", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Does it matter if my dog lies next to the radon monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0193", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Can I put the radon monitor on the floor if my dog might sniff it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0194", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My toddler unplugged the radon monitor. Does the data reset when it's plugged back in?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0195", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My child moved my radon monitor to a different room without telling me. Does the reading still count?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0196", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Does the radon monitor measure smoke, CO, or natural gas?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0197", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My radon monitor is near my gas furnace. Should I move it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0198", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Can a radon monitor detect carbon monoxide?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0200", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Can bathroom humidity affect the radon monitor reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0201", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Can I put the radon monitor in a bathroom?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0202", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Does mold in my basement affect the radon monitor reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0203", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "I ran a radon test right after painting my basement. Does paint affect the reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0204", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "I was doing drywall in my basement - does construction dust affect the monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0205", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My radon monitor is covered in dust. Does that affect accuracy?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0207", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Can I rinse off my radon monitor if it gets dirty?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0208", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My radon monitor fell off the shelf. Does a drop damage the sensor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0210", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "What temperature range does a radon monitor need to work accurately?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0211", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My radon monitor is near the TV. Does electronics interference affect it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0212", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Can Wi-Fi signals or cell phone signals affect a radon monitor reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0213", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Can Alexa or Google Home tell me my Airthings radon reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0215", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "I went on vacation for 2 weeks. When I came home, my Airthings had a spike in the history. Is that accurate?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0216", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My Airthings kept recording while I was away. Is the data from an unoccupied house meaningful?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0217", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Does it matter if the basement is unoccupied when I'm monitoring radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0218", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "I had a large party in my finished basement last weekend - lots of people, doors open. My radon dropped during the party. Is that real?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0219", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My basement flooded. Should I move the radon monitor before the restoration work?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0220", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Should I move my radon monitor during a basement renovation?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0221", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Is it safe to run a radon test while doing a renovation in the basement?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0222", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My contractor is opening up the basement floor for a drain installation. Should I stop my radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0223", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "I have a wood stove in my basement and I lit it for the first time this fall. My radon spiked. Connected?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0224", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Does burning candles in the basement affect the radon monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0225", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My radon monitor is in a finished basement with carpet. Does carpet hold radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0226", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My radon monitor is sitting on a carpet vs a hard surface - does that matter?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0227", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Can radon monitors be used outdoors?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0228", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "I put my radon monitor in my detached garage. Is that meaningful?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0229", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My garage is attached and has a door into the house. Should I test the garage for radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0230", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My basement is half finished and half unfinished - which side should the monitor be on?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0231", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "I bought my monitor secondhand on eBay. Is it still accurate?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0232", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "My radon monitor is 8 years old but was only used occasionally. Is it still reliable?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0233", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Is there a way to test if my consumer radon monitor is still accurate without professional calibration?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0234", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "Can I return a radon monitor to the store if the reading seems wrong?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0235", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Oddball and Rambling Homeowner Questions", "question": "I have two different monitors side by side showing different numbers. Which one is broken?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0236", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Which consumer radon monitors are most trusted by professional radon mitigators?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0237", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Do professional radon contractors recommend any consumer monitors to homeowners?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0238", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Are consumer radon monitors used in academic radon research?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0239", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Are consumer radon monitors regulated by any US government agency?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0240", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Does the EPA certify or test consumer radon monitors?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0241", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Does AARST or NRPP certify consumer radon monitors?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0242", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Is there any third-party validation of Airthings sensor accuracy?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0243", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Is there any third-party validation of RadonEye sensor accuracy?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0244", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Can my homeowner's insurance company accept consumer monitor results?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0245", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Can a consumer monitor reading be submitted as evidence in a legal dispute?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0246", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "What happens if I find out my radon monitor has been drifting and giving me false readings for years?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0247", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "My consumer monitor keeps reading very low - could the sensor have failed?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0248", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "My consumer monitor keeps reading very high - could the sensor be stuck?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0249", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Is there a way to calibrate a consumer radon monitor at home?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0250", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Can I send my radon monitor in for professional calibration?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0251", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Who can I contact if I think my radon monitor is inaccurate?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0252", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Does the manufacturer warranty cover sensor drift?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0253", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "How long is the typical warranty on a consumer radon monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0254", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Is there a difference between monitor accuracy at low radon levels vs high levels?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0255", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "What should I do if two consumer monitors in the same room give very different readings?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0256", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Consumer Confidence and Trust Questions", "question": "Is it worth buying two cheaper monitors or one higher-end monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0257", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "Should I move my monitor between rooms to get different readings?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0258", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "How long do I need to leave the monitor in one spot before the reading is representative?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0259", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "My monitor is on a windowsill - is that okay?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0260", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "Is it bad to place a radon monitor near a sump pump discharge line?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0261", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "Can I put a radon monitor inside a storage closet in the basement?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0262", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "My basement has a central HVAC air handler - should I put the monitor near it or away from it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0263", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "I have a drop ceiling in my basement. Should the monitor be above or below the tiles?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0264", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "My laundry room has a dryer vent to outside. Does that affect radon near the dryer?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0265", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "Can I put a radon monitor inside a cabinet or bookshelf?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0266", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "My basement has a finished bar area and an unfinished utility area. Where should the monitor go?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0267", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "I have a daylight basement where one side has windows. Does the windowed side have lower radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0268", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "My basement has a walkout door. Does that side have lower radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0269", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "Can I test radon in a sunroom or three-season porch?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0270", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "My office is in a finished basement. Where should I put the monitor relative to my desk?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0271", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "I have a bedroom in the basement. Should the monitor be in the bedroom or the common area?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0272", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "My teenager sleeps in the basement. Should the monitor be in their room?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0273", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "Can I move my monitor between floors to compare readings?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0274", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "My basement has two separate areas - a finished area and a mechanical room. Do I need to test both?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0275", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "I have a finished basement with multiple rooms. Is one monitor enough?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0276", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Additional Placement Questions", "question": "I run a home daycare in my finished basement. Where should I put the radon monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0277", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "I'm a real estate agent. My client's Airthings shows 3.8. Do I need to tell them to get a professional test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0278", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "The home I'm buying already has a radon system and the Airthings they left shows 1.2. Do I still test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0279", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "My buyer wants to use their own Airthings as the test. As a seller, should I accept that?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0280", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "I'm selling my house and the inspection radon test came back at 3.9. Should I offer to mitigate?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0281", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "As a buyer, can I request that mitigation be done before closing even if radon is below 4.0?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0282", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "I'm a property manager with 12 rental units. What is my obligation to test for radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0283", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "I just inherited a house. Radon was never tested. What should I do first?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0284", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "My buyer's agent is recommending they skip the radon inspection contingency. Is that a good idea?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0285", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "I flipped a house and added a basement. Do I need a radon test before selling?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0286", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "The home inspector told me radon was not their area. Who do I call for a radon test specifically?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0287", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "Can a home inspector be licensed to do both a home inspection and a radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0288", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "My inspector said radon can be fixed easily. Is that true?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0289", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "The previous owner mitigated the radon but never provided paperwork. What should I get?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-monitor-question-bank-recovered-0290", "phase": "phase3", "type": "draft_question", "topic": "draft-monitor-question-bank-recovered", "category": "draft-monitor-question-bank-recovered", "subtopic": "Real Estate and Rental - Additional Questions", "question": "I bought a house with a mitigation system. There is no post-mitigation test report. What should I do?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "draft-monitor-question-bank-recovered", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0004", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What type of sensor does the Airthings Wave use?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0005", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What is an alpha track detector and how is it different from an electronic monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0007", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Can I trust a radon monitor I bought on Amazon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0008", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Why does my radon monitor reading change throughout the day?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0009", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What is pCi/L and why is it used to measure radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0010", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What does pCi/L stand for?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0012", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Is an electronic radon monitor better than a charcoal canister test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0013", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "How long does a radon monitor take to give an accurate reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0014", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Why do consumer radon monitors show different numbers than professional tests?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0015", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What is a passive radon detector vs an active radon detector?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0016", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Can a radon monitor detect other gases?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0017", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Do radon monitors need to be plugged in or do they run on batteries?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0018", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Do electronic radon monitors expire?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0019", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "How often do electronic radon monitors need to be replaced?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0020", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What is a continuous radon monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0022", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Can I use an electronic radon monitor to satisfy a real estate contingency?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0023", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What is the difference between a consumer radon monitor and a CRM (continuous radon monitor)?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0024", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Do consumer radon monitors meet AARST standards?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0025", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What is AARST and why does it matter for radon testing?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0026", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Are consumer radon monitors EPA-approved?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0027", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "How does radon get into a home, and can a monitor tell me where it's coming from?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0028", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What is the EPA action level for radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0029", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "At what radon level should I take action?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0030", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "My radon reading is between 2.0 and 4.0 pCi/L - do I need to do anything?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0031", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What is the national average radon level indoors?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0032", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What is the outdoor background level of radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0033", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Can a radon monitor measure outdoor radon levels?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0034", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Will a radon monitor go off like a smoke alarm?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0035", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Does a radon monitor alarm go off at 4 pCi/L?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0036", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What does it mean when a radon monitor beeps?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0038", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Is it better to run a long-term test or a short-term test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0039", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What is an \"acceptable\" radon level?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0041", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Why would my radon level spike overnight?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0042", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Does a basement radon monitor measure the same thing as a professional test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0043", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "Can I use multiple radon monitors in different rooms?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0044", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "What is the lowest pCi/L a consumer monitor can reliably detect?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0045", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Basics", "question": "My monitor says 0.3 pCi/L - is that actually zero?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0046", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Where should I place my radon monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0047", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "What floor should I put my radon monitor on?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0048", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Should I put my radon monitor in the basement?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0049", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Can I test for radon on the first floor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0050", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Does radon get worse on lower floors?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0056", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Can I put a radon monitor next to an HVAC vent?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0057", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Should I put my radon monitor near a sump pit?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0058", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "How far from the sump pit should the radon monitor be?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0060", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Should I put a radon monitor in the crawlspace?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0062", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "My crawlspace doesn't have a door - how do I get a radon reading in there?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0063", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Should I put a monitor in every room?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0064", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "My house has a basement and a crawlspace. Where should I put the monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0065", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "I have a two-story house with no basement. Where do I test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0066", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "My house is on a slab - where do I put the monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0067", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Can I put a radon monitor in the bedroom?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0068", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Should I put a radon monitor in my kids' bedroom?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0069", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "My baby sleeps on the second floor - should I put the monitor there?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0070", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "My son sleeps in the finished basement. Should I put the monitor in his room or in the main basement?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0072", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Should I test for radon in a garage?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0074", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "My laundry room is in the basement - is that a good testing spot?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0075", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Does it matter if the monitor is near the dryer?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0076", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Should I keep the monitor away from dehumidifiers?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0077", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "What does \"closed-house conditions\" mean for radon testing?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0078", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "How long do I need to keep the house closed before a radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0079", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Do I need to keep windows closed during the whole test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0080", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "What counts as \"closed building\" - can I open doors?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0082", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Can I run the furnace during a radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0083", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "What do I do with my whole-house fan during a radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0084", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Can I open the garage door during a closed-building radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0085", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Does a fireplace affect radon test results?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0086", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Should I avoid burning wood during a radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0087", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "How long should I run a consumer radon monitor before taking the reading seriously?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0088", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Is 48 hours enough time to get a reliable reading from a consumer monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0089", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "How long do I run the monitor for a real estate test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0090", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "What is the minimum time for a real estate radon test in Illinois?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0092", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Does the season affect when I should test for radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0093", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Does radon testing accuracy change with the season?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0094", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "I ran my radon test in summer with windows open - is the result valid?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0095", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "My landlord says I should test in winter for a more accurate result. Is that true?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0096", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "I had a professional test done last year and it came back high. Now my consumer monitor says low. Which is right?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0097", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "My consumer monitor is showing very different numbers from the lab test. Should I trust the monitor or the lab?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0098", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "Can I place a consumer monitor in an unfinished basement?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0099", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "What is the recommended placement height for AARST-compliant testing?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0100", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Placement and Testing", "question": "I have an unfinished basement with exposed pipes. Where is the best spot for the monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0101", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Does the Airthings app show hourly readings?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0102", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings device is showing question marks instead of a reading. What happened?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0103", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What is a normal Airthings radon reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0104", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings app shows a 24-hour reading and a long-term average - which one should I use?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0105", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What is the \"long-term average\" in the Airthings app?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0106", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "How long does Airthings take to show a 7-day average?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0107", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings reading jumped from 1.2 to 4.8 overnight. Is that normal?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0108", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Why does my Airthings reading go up at night?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0109", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings reading is higher in winter than summer. Is that normal?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0110", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What does the green LED on the Airthings Wave mean?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0111", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What does the yellow LED on the Airthings Wave mean?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0112", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What does the red LED on the Airthings Wave mean?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0113", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings LED is yellow at 2.7 pCi/L. Should I be worried?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0114", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings app says my 7-day average is 4.1 pCi/L. Is that the action level?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0115", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings long-term average just crossed 4.0 pCi/L. What do I do?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0116", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings is showing 6.3 pCi/L. How worried should I be?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0117", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings went from 1.8 to 8.0 pCi/L after it rained. What happened?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0118", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings spiked to 12 pCi/L for one night. Does that mean I have a problem?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0119", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings showed 20 pCi/L for a few hours. Is that dangerous?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0120", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings reading has been steady at 3.9 pCi/L for three weeks. Is 3.9 below the action level?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0121", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings long-term average is 3.5 pCi/L. My husband says we're fine. Am I overreacting?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0122", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "The Airthings reading looks good but I'm still worried. Should I get a professional test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0123", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings Wave is brand new and already showing 5.2 pCi/L. Is it broken?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0124", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Does the first 24 hours of Airthings data count, or is it unreliable?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0125", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What does the Airthings \"fan wheel\" visualization mean?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0126", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "I waved my hand near the Airthings Wave and the fan lit up - is that the reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0127", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings graph has a spike that looks like it goes off the chart. Is my data corrupted?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0128", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "I ran my HVAC fan constantly and my Airthings reading dropped. Is that a real fix?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0129", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "I opened all my windows and my Airthings dropped to 0.5 pCi/L - does that mean my house is fine?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0130", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings shows low radon in the basement but I'm worried about upstairs. Do radon levels differ by floor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0131", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "I have an Airthings in the basement at 3.0 pCi/L and one on the first floor at 1.1 pCi/L. Which one matters?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0132", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings reading was 1.5 pCi/L for months, then jumped to 4.8 last week. What changed?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0133", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Does Airthings measure radon accurately or does it just estimate?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0134", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "How accurate is the Airthings Wave Radon compared to a professional CRM?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0135", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Is the Airthings Corentium Home as accurate as the Wave Radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0136", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings and my neighbor's Airthings are in houses next door and show very different readings. Why?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0137", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings showed 2.1 pCi/L for 6 months, then we had a basement flood and now it's 5.5 pCi/L. Connected?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0138", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings shows 4.0 pCi/L exactly. Is that at the limit or over it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0139", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What does the Airthings \"short term\" reading represent?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0140", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings app doesn't show any historical data before last week. Where did it go?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0141", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings long-term average went up after I installed a new water heater. Coincidence?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0142", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "After my radon system was installed my Airthings dropped from 6.0 to 0.8 pCi/L in 48 hours. Is that real?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0143", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings says 0.0 pCi/L. Is that possible or is it broken?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0144", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Does the Airthings reading I see right now represent current radon levels or a rolling average?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0145", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My phone was away from home for a week and when I came back the Airthings showed a spike. Is that accurate even without Bluetooth nearby?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0146", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings stores data on the device even when Bluetooth is off, right?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0147", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings Wave has been unplugged (batteries out) for 3 months. Will the reading start from scratch or pick up where it left off?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0148", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Can the Airthings app tell me if I need a mitigation system?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0149", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "The Airthings app told me my radon is \"high\" - does that mean I need a professional?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0150", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What does the Airthings color threshold chart use as the cutoffs?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0151", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings reading improved after I sealed a crack in my basement floor. Is that believable?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0152", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Airthings shows a much higher reading after we added a door to the laundry room - why?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0153", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "I put my Airthings in the crawlspace access opening. Is that a valid reading spot?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0154", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "How long does it take the Ecosense EcoQube to give a reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0155", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Ecosense EcoQube is reading 5.1 pCi/L. Is that high?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0156", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "How do I interpret the Ecosense app's radon level graph?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0157", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "What does the Ecosense color coding mean for radon levels?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0158", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Ecosense is reading 3.8 pCi/L - just under the EPA action level. What should I do?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0159", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Ecosense jumped from 1.5 to 7.2 pCi/L overnight. Is the device malfunctioning?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0160", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "The Ecosense EcoQube reading went down after I turned on my whole-house fan. Should I trust that?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0161", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Ecosense reading is very different from an old charcoal test I did. Which is right?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0162", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "How long do I need to run the Ecosense EcoQube before I trust the reading?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0163", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Ecosense shows 2.3 pCi/L but my neighbor's Airthings shows 4.5 pCi/L. Can that be?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0164", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "The Ecosense app shows \"good\" at 3.9 pCi/L. Does \"good\" mean I don't need to do anything?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0165", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Does the Ecosense EcoQube give different readings at different times of day?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0166", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Is the Ecosense EcoQube reading affected by humidity?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0167", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Ecosense reading went up when the weather changed. Is that normal?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0168", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Does the Ecosense EcoQube measure hourly radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0169", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "Can the Ecosense EcoQube pick up a brief spike in radon if I open a window?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0170", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Readings, Spikes, and Seasonal Changes", "question": "My Ecosense has been running for 2 weeks and the average is settling around 4.6 pCi/L. Is that actionable?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0171", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Is there a radon monitor that a professional installer would trust as a post-mitigation verification tool?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0172", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "How soon can I test after a radon mitigation system is installed?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0173", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "How long do I have to wait before testing after mitigation?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0174", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Can I test the same day the mitigation system is installed?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0175", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "What is the minimum waiting period after activation before a radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0176", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "What is the maximum waiting period for a post-mitigation test in Illinois?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0177", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Illinois requires a post-mitigation test. Who pays for it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0178", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Do I need a professional test or can I use my consumer monitor for post-mitigation testing?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0179", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Can I use my Airthings as my official post-mitigation test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0180", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Does my Airthings count for the required post-mitigation test in Illinois?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0181", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Who performs the required post-mitigation test in Illinois?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0182", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Who is allowed to do the post-mitigation test - me or a licensed tester?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0183", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Why does Illinois require the post-mitigation test to be done by an independent tester?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0184", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My consumer monitor says 0.8 pCi/L after mitigation. Do I still need a professional test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0185", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My Airthings dropped from 5.5 to 0.7 pCi/L right after the fan was turned on. Is that real?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0186", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My Airthings showed high radon for the first 24 hours after the mitigation system started. Should I be worried?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0187", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "How quickly should radon drop after the mitigation system is activated?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0188", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Can I test before 30 days are up?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0189", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My post-mitigation professional test came back at 0.5 pCi/L. Is that good?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0190", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My post-mitigation test came back at 2.1 pCi/L. Is that considered successful mitigation?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0191", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My post-mitigation test came back at 3.8 pCi/L. Is the system not working?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0192", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My post-mitigation test was 4.0 pCi/L exactly - is the system a failure?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0193", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My post-mitigation test was 4.2 pCi/L. What do I do now?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0194", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My mitigation system has been running a year and my consumer monitor shows 1.2 pCi/L. Do I need to retest professionally?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0195", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "How often should I have a professional radon test if I have a mitigation system?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0196", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "I have a mitigation system. When should I do my next professional test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0197", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My manometer gauge reads correctly after installation. Does that mean I don't need a radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0198", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My post-mitigation test was 2.8 pCi/L. My neighbor's similar house tested at 0.5 pCi/L after mitigation. Is mine underperforming?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0199", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "I had mitigation installed 3 years ago. My Airthings still shows 1.0 pCi/L. Is that a success?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0200", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My radon system has been running for 5 years. When should I test again?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0201", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "I bought a house with an existing mitigation system. How do I know if it's working?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0202", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Does a manometer gauge prove the mitigation system is working?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0203", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "How do I read the manometer gauge on my radon mitigation system?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0204", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My manometer gauge appears level on both sides. What does that mean?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0205", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My manometer gauge shows fluid on one side but not much movement. Is that normal?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0206", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Both sides of my manometer tube are exactly even. Is my fan running?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0207", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My mitigation fan is making a noise but the manometer shows no movement. Is something wrong?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0208", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My radon fan stopped working. How do I know when it stopped?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0209", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "My mitigation fan made a loud noise and now my radon is going up on the monitor. Is that the fan dying?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0210", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "I hear my radon fan but I'm not sure it's working. What should I check?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0211", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "How do I know when my mitigation system needs maintenance?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0212", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Does a mitigation system ever stop working without any visible sign?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0213", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "How long do radon mitigation systems typically last?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0214", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "I had mitigation installed by a different company before I bought the house. Who do I call if radon comes back?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0215", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Use After Mitigation", "question": "Does my radon system warranty cover re-testing costs if radon comes back?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0216", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What Airthings radon monitors are available for home use?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0217", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What is the difference between the Airthings Corentium Home and the Wave Radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0218", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What is the Airthings Corentium Home?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0219", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Does the Airthings Corentium Home have an app?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0221", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What is the Airthings Wave Radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0222", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Does the Airthings Wave Radon connect to Wi-Fi or Bluetooth?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0223", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "How do I pair my Airthings Wave Radon with my phone?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0224", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What does the Airthings Wave Radon LED color mean?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0225", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What is the Airthings Wave Plus?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0226", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "How is the Airthings Wave Plus different from the Wave Radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0227", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Does the Airthings Wave Plus measure CO2?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0228", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What extra sensors does the Airthings Wave Plus have?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0230", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Does the Airthings View Radon have a built-in screen?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0231", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What is the difference between the Airthings View Radon and the Wave Radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0233", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "How do I create an Airthings account?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0238", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "My Airthings won't connect to Bluetooth - what do I do?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0239", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "How far can Airthings Bluetooth reach?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0240", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "My Airthings Wave Plus keeps disconnecting from the app. What's wrong?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0241", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "How do I set up Wi-Fi on my Airthings View device?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0242", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Does the Airthings Wave work without Wi-Fi?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0244", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What batteries does the Airthings Wave Radon use?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0245", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "How long do the batteries last in an Airthings Wave?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0247", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "How do I replace the batteries in my Airthings Corentium Home?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0248", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What does the Airthings app dashboard look like?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0249", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "How do I read my Airthings radon history graph?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0250", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Can I export my Airthings data?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0252", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "At what level does Airthings send a notification?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0253", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Can I have Airthings notify me by text message?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0254", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Can I share my Airthings data with family members?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0256", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Can multiple Airthings devices share one account?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0257", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "I lost access to my Airthings account - how do I recover it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0258", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "I bought a used Airthings device - how do I reset it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0259", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Does Airthings work with Google Home or Amazon Alexa?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0261", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Can Airthings connect to a smart home system?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0262", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "How do I update the firmware on my Airthings device?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0264", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Does Airthings store my radon data in the cloud?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0265", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "How long does Airthings store historical data?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0266", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "I have an older Airthings device - is it still supported?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0267", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What is the Airthings for Business plan?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0268", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Does Airthings have a warranty?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0269", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What is the warranty on the Airthings Wave Radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0270", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Can I use the Airthings app without creating an account?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0271", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Does the Airthings Wave Plus measure temperature and humidity?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0272", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Is Airthings made in Norway?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0273", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "How long has Airthings been making radon monitors?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0274", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "Is Airthings the most popular consumer radon monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0275", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What country is Airthings from?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0277", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What is the difference between the EcoQube and the EcoQube Flex?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0279", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor App, Wi-Fi, Battery, and Setup", "question": "What is the Ecosense EcoTracker?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0281", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Is the Airthings Wave Radon better than the RadonEye RD200?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0282", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "What is the best consumer radon monitor to buy in 2024?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0283", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Airthings vs RadonEye - which should I buy?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0284", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "RadonEye vs Ecosense - which is more accurate?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0285", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Is the Ecosense EcoQube better than the Airthings?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0286", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Which radon monitor do home inspectors prefer?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0287", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Is there a consumer radon monitor that is as accurate as a professional CRM?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0288", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "What is a professional continuous radon monitor (CRM) vs a consumer monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0289", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Why do professionals use Sun Nuclear or Radalink monitors instead of Airthings?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0290", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Should I buy an Airthings or get a professional test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0291", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Is it worth buying an expensive radon monitor or is a cheap one just as good?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0292", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "What is the cheapest radon monitor that is actually accurate?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0293", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "What makes the RadonEye faster than Airthings?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0294", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "What is the advantage of a radon monitor with a built-in screen vs no screen?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0295", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Which radon monitor is best if I don't have a smartphone?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0296", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Which radon monitor is best for a crawlspace?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0297", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Which radon monitor is best for a basement?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0298", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Which radon monitor is best for a house on a slab?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0299", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Can I use any of these monitors in an apartment?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0300", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Which monitor stores the most historical data?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0303", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Is the RadonEye RD200 used by professionals or just homeowners?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0304", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "What radon monitor should I use for a real estate transaction?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0305", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Does a buyer's agent radon monitor count for the same as a professional test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0306", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "My home inspector wants to use a RadonEye instead of a Sun Nuclear monitor. Should I accept that?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0307", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Which radon monitor do EPA-referenced standards recommend?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0309", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Can I share my Airthings data with my insurance company?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0310", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Are all these monitors certified by any lab?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0311", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "What does C-NRPP or NRPP certification mean for radon monitors?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0312", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Does Airthings have any third-party accuracy certification?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0314", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "I tested with a charcoal canister and then bought an Airthings - the numbers are different. Which was more accurate?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0316", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Are US-made radon monitors more accurate than Korean or Norwegian ones?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0317", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Is there a radon monitor with an audible alarm I can hear from upstairs?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0318", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Which radon monitor requires the least technical knowledge to use?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0319", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Which radon monitor is most reliable for long-term whole-house monitoring?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0320", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Is the Airthings View Radon better than the Corentium Home?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0321", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Is there a radon monitor that alerts me even when I'm not home?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0322", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Which radon monitor sends the best push notifications?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0323", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Which radon monitor has the most trustworthy sensor technology?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0324", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Does the ionization chamber sensor used in RadonEye/Ecosense work differently than the silicon sensor in Airthings?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0325", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "What is a semiconductor radon sensor vs a pulse ionization chamber?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0327", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Which radon monitor should I trust after a mitigation system is installed?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0328", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Do professionals ever use Airthings to verify mitigation results?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0329", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Is it better to buy two consumer monitors and compare them?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0330", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Monitor Comparisons and Product Choice", "question": "Is one radon monitor enough for a whole house?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0331", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "The radon test at inspection was 1.8 pCi/L. My neighbor's house has radon at 6.2 pCi/L. Should I do a longer test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0332", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "Do children breathe more relative to their body size, making radon more dangerous for them?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0333", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My sister is pregnant and staying with me for 3 months. My radon is 4.3 pCi/L. Is that dangerous for her baby?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0334", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My sister has been living in my walk-out basement for a year. I just found out radon is 4.5 pCi/L. Should I tell her?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0335", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My sister is receiving radiation treatment and our radon is 4.5 pCi/L. Is that a problem?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0336", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor is elderly and lives alone. Their radon is 5.5 pCi/L. Is there a social responsibility to help them fix it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0337", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My daughter's boyfriend has moved into the basement. The radon is 4.7 pCi/L. Should I do something about it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0338", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "I have a multigenerational household with elderly grandparents, parents, and young kids. Radon is 4.5 pCi/L. Who is most at risk?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0339", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My parents have lived in their house for 40 years and just found out the radon is 6 pCi/L. Is it too late to fix it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0340", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My parents are in their 70s and their radon is 5.5 pCi/L. Is it worth fixing at their age?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0341", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My elderly parents refused to fix the radon. Now 3 years later they're sick. Is the radon related?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0342", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor found out their radon was 9 pCi/L. Should I get tested immediately?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0343", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My parents finally tested and the radon came back at 5.5 pCi/L. They are in their 80s. Is it worth fixing now?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0344", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My daughter has an Airthings in her basement rental unit and it's at 4.6 pCi/L. Should she move?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0345", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My brother's Airthings shows 3.9 pCi/L in the basement. He says that's under 4 so he's fine. Is he right?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0347", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My mom's Airthings has been in the yellow zone for weeks. What does that mean practically?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0348", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My dad's Airthings is showing red. He's not sure what to do. What should he do?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0350", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My sister-in-law's Airthings shows 2.7 pCi/L. She asked me if she should get a mitigation system. What's the answer?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0352", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My aunt has been showing me screenshots of her Airthings and the graph keeps going up. Is she in danger?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0354", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My friend's Airthings is showing 8.3 pCi/L and they live in a finished basement. What should I tell them to do right now?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0355", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My coworker is freaking out because their Airthings went red. I don't know anything about radon - what is the key info?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0356", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My daughter's Airthings started showing high numbers after they moved furniture around. Could moving things around trigger it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0357", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My landlord installed an Airthings in the common basement. It reads 5.1 pCi/L. What does that mean for tenants upstairs?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0358", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor used her Airthings as a radon test before listing her house. Is that a valid test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0361", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My grandmother doesn't have a smartphone but has an Airthings. Can I set it up remotely?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0362", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My dad has a RadonEye RD200 and it read 6.8 pCi/L. Should he call someone?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0363", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My brother has a RadonEye and says it reads in 10 minutes. Can he really know the radon level that fast?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0364", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My father's RadonEye alarm went off at 3 AM. He called me in a panic. What should I tell him?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0365", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My sister's RadonEye read 4.3 pCi/L in her basement. She's asking if she should sell the house. What's the right answer?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0366", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My friend's RadonEye showed 1.2 pCi/L after their mitigation was installed. Is that a good result?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0367", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My husband's friend used a RadonEye to test our house as a favor. It showed 4.7 pCi/L. Is that a real number?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0368", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My mom's home inspector used a RadonEye instead of a charcoal test. Is that acceptable in Illinois?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0369", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor tested their radon with a RadonEye before listing their house. The buyer's agent is saying that doesn't count as a real test. Who is right?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0370", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My sister-in-law uses a RadonEye to check if radon is acceptable before each property she tours. Is that useful?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0371", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My mother recently lost her RadonEye after moving. What is the risk of using her house without monitoring?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0372", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My dad's RadonEye is 4 years old. Should he replace it or calibrate it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0373", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor's RadonEye stopped working and she's asking what to do in the meantime. What should she use?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0374", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My in-laws showed me their RadonEye - it's been sitting in a kitchen drawer for 2 years. Is it still accurate when turned on?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0375", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My father tested his finished basement with a RadonEye and got 3.7 pCi/L. He's satisfied. I'm not. Who is right?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0376", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My mom's friend told her they use a RadonEye in their daycare center basement. Is that reassuring or worrying?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0377", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My colleague's RadonEye is showing red. They asked me for advice. What do I tell them?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0378", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor bought an Ecosense monitor and says it's the most accurate one available. Is that true?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0382", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My coworker has an Ecosense monitor in their home office at 4.3 pCi/L. Their employer doesn't think work-from-home radon is a workplace issue. What's the actual answer?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0383", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My friend's Ecosense says 3.5 pCi/L but the professional test they had done said 5.0 pCi/L. Why the discrepancy?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0384", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My brother said his Ecosense read 0.1 pCi/L right after a professional mitigation system was installed. Can it really drop that fast?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0385", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My coworker borrowed a radon monitor from their county health department. Is that a reliable test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0387", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My home inspector brought their own radon test device. Is that different from a charcoal test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0388", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My inspector said they use a \"professional continuous radon monitor\" - what does that mean?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0389", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor had a professional radon test done and got 2.5 pCi/L. But I have an Airthings next door that reads 4.7 pCi/L. Can that be right?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0390", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My friend recommended I borrow their radon monitor. Is a borrowed monitor as accurate as a new one?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0391", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor said they got a free radon test kit from the state. Is that more or less accurate than a consumer monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0392", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My doctor recommended I get a radon test. Should I buy a consumer monitor or get a professional test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0393", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My insurance agent told me to test for radon. Does the type of test matter for insurance purposes?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0394", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My father-in-law has a radon monitor from the 1990s. Is it still accurate?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0395", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My old radon monitor is 7 years old. Do I need a new one?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0396", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My neighbor threw out their old radon monitor and bought a new one. Do they need to retest?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0397", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My uncle got a radon test as part of a home energy audit. Is that a valid radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0398", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My county health department offered free radon test kits. Are those charcoal or electronic?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0399", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My state program mailed me a free radon test kit. How do I use it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0400", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Secondhand, Borrowed, and Neighbor Monitor Readings", "question": "My employer gave all employees a radon test kit as a work-from-home health initiative. Is it worth doing?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0401", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Do I need a radon test when buying a house?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0402", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is radon testing required for home sales in Illinois?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0403", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Who pays for radon testing in a real estate transaction?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0404", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Can the buyer's radon test be done by a consumer monitor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0405", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is a consumer radon monitor acceptable for a real estate contingency?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0406", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Does the RadonEye RD200 qualify as an acceptable real estate test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0407", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Can my home inspector test for radon with a RadonEye?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0408", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Does my home inspector's Airthings count as a valid radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0409", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My home inspector used a consumer radon monitor instead of a professional device. Should I accept that?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0410", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "What devices are acceptable for real estate radon testing in Illinois?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0412", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is a 48-hour test required for real estate transactions?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0413", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "What is the minimum test duration for real estate radon testing in Illinois?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0414", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Can I waive the radon test as a buyer?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0415", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "The home I'm buying had a high radon test two years ago and they mitigated it. What should I request?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0416", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My buyer wants to use a RadonEye for the inspection. Is that acceptable?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0417", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My inspector tested with a charcoal canister. How long does it take to get results?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0418", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My home inspector report says radon came back at 4.3 pCi/L. What are my options as a buyer?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0419", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "The sellers mitigation system lowered radon to 1.5 pCi/L - do I need a new test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0420", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "I'm rehome-budget planning my home. Does my lender require a radon test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0421", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Can a radon test result from 5 years ago satisfy a buyer's contingency?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0422", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "I'm a landlord. Do I need to test for radon before renting my basement apartment?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0423", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Does Illinois law require radon testing for rentals?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0424", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "If radon is above 4 pCi/L at inspection, can I demand the seller fix it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0425", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is a real estate radon test supposed to be done with closed windows?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0426", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My real estate agent says the radon test was done with windows open. Is that valid?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0427", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "The radon inspection was done in summer with air conditioning running - is that acceptable?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0428", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "How long is a real estate radon test result considered valid?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0429", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My real estate radon test showed 4.0 pCi/L and the seller is refusing to mitigate. What are my options?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0430", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Can I use a short-term test for real estate or do I need a long-term test?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0432", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "How dangerous is radon exposure at 4 pCi/L?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0433", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "What is the lung cancer risk from radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0434", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "How many people die from radon-related lung cancer every year in the US?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0436", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "How does radon cause cancer?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0438", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Can a short period of high radon exposure cause lung cancer?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0439", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is radon exposure immediate or cumulative?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0440", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Can radon exposure cause symptoms I would notice?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0441", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Can I feel radon making me sick?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0442", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Does radon exposure cause headaches?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0443", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Does radon exposure cause fatigue?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0444", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Does radon exposure cause shortness of breath?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0446", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "If I've been exposed to high radon for years, should I see a doctor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0447", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "What should I tell my doctor about radon exposure?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0448", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Should I get a lung cancer screening if I've lived with elevated radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0449", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "What is a low-dose CT scan and should radon exposure prompt me to get one?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0450", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is 4 pCi/L radon the same risk as living near a nuclear plant?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0453", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Why can't I smell or see radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0454", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Does radon have any color or odor?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0455", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "How long does radon stay in the air after it's been ventilated out?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0456", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Will a radon mitigation system completely remove radon from my home?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0457", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "What is a realistic expected radon level after a successful mitigation?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0458", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "What does the EPA say about radon levels between 2.0 and 4.0 pCi/L?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0459", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "The EPA recommends considering mitigation at 2.0 pCi/L. Is that a different threshold?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0460", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "What percent of US homes have elevated radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0463", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Does living in the Midwest mean higher radon risk?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0464", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is radon risk higher in rural areas?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0465", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Can I reduce radon risk by spending less time in the basement?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0466", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Does working from home in a basement with 3.5 pCi/L radon increase my risk significantly?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0467", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "My family spends very little time in the basement. Does that reduce the risk from 5 pCi/L radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0468", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "I heard that radon risk is cumulative - does that mean the longer I've been exposed the higher my risk?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0469", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is there anything I can do to reduce the damage already done from past radon exposure?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0470", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "I found out my childhood home had high radon. Should I be worried about lifetime risk?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0471", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "Is radon more dangerous if you're a smoker?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0472", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Family, Health Worry, and Past Exposure", "question": "How much more dangerous is radon for a current smoker vs a never-smoker?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0473", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "I rent my basement apartment and the landlord says radon isn't his problem. Is that true in Illinois?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0474", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "I'm renting a house and bought an Airthings - it reads 5.2 pCi/L. What are my rights as a tenant?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0475", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "My landlord wants to install a radon system but says he'll raise my rent to cover the cost. Can he do that?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0476", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "I live in the unit above my landlord, and the basement where he stored stuff showed 6.0 pCi/L on a monitor he put there. Does that affect my apartment upstairs?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0477", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "Can I break my lease if my rental has elevated radon and my landlord refuses to fix it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0478", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "My landlord installed a radon mitigation system but I'm still showing 4.2 pCi/L on my monitor. Does the landlord need to keep working until the number is below 4.0?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0479", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "I own a rental duplex and the lower unit tenant is concerned about radon. I've never tested. Am I required to?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0480", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "I'm subletting a basement apartment and the person I'm subletting from says the landlord knows about the radon issue but hasn't done anything. What are my options?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0481", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "My building has 12 units. The basement unit tests at 6.0 pCi/L. Do the building owner's obligations extend to all units or just the unit with elevated radon?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0482", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "I'm moving out of my rental and the landlord wants to keep part of my security deposit to cover a radon test I never agreed to. Is that valid?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0483", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "My basement apartment has a sump pit in the middle of the room with no sealed lid. Could that be affecting my radon level of 7.0 pCi/L?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0484", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "I'm a first-time renter in Illinois and my landlord offered to let me test for radon before signing the lease. Is that unusual and should I take them up on it?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0485", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "My rental has a radon fan installed but I can't see a pressure gauge anywhere. How do I know if the system is actually working?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0486", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "I've been in my rental for 3 years. I just found out radon was discovered in the unit before I moved in and the landlord mitigated it. The system seems to have stopped working. Who's responsible for the repair?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0487", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "My landlord told me radon testing is my responsibility as the tenant. I don't think that's right. Who is typically responsible for radon testing in a rental in Illinois?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-draft-phase-3-clean-question-bank-0488", "phase": "phase3", "type": "draft_question", "topic": "draft-phase-3-clean-question-bank", "category": "draft-phase-3-clean-question-bank", "subtopic": "Real Estate, Rental, and Documentation Questions", "question": "I'm a college student renting a basement apartment. The house is old and the landlord is unresponsive. Radon is 5.0. What can I actually do?", "answer": null, "source": "cleaned-master/03-draft-question-bank-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "draft-phase-3-clean-question-bank", "phase 3 full package", "draft question bank" ], "cleanupChanged": false }, { "id": "p3-rescued-family-friend-secondhand-questions-recovered-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-friend-secondhand-questions-recovered", "category": "rescued-family-friend-secondhand-questions-recovered", "subtopic": "Rescued Family Friend Secondhand Questions Recovered", "question": "My uncle is on a fixed income and says he can't afford radon mitigation. Are there any options?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "rescued-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-friend-secondhand-questions-recovered-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-friend-secondhand-questions-recovered", "category": "rescued-family-friend-secondhand-questions-recovered", "subtopic": "Rescued Family Friend Secondhand Questions Recovered", "question": "My coworker has a work-from-home home office in his basement at 4.3 pCi/L. His employer says workplace radon isn't their problem. Is that correct?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "rescued-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-friend-secondhand-questions-recovered-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-friend-secondhand-questions-recovered", "category": "rescued-family-friend-secondhand-questions-recovered", "subtopic": "Rescued Family Friend Secondhand Questions Recovered", "question": "My friend's new house tested at 5.3 pCi/L at inspection and the seller is offering a a small amount repair allowance instead of mitigating. Is that a fair deal?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/FAMILY-FRIEND-SECONDHAND-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "rescued-family-friend-secondhand-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-family-worry-questions-recovered-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-family-worry-questions-recovered", "category": "rescued-health-family-worry-questions-recovered", "subtopic": "Rescued Health Family Worry Questions Recovered", "question": "My child's school is in a building with radon. The principal says the levels are acceptable. How do I know if that's true?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "rescued-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-family-worry-questions-recovered-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-family-worry-questions-recovered", "category": "rescued-health-family-worry-questions-recovered", "subtopic": "Rescued Health Family Worry Questions Recovered", "question": "Our radon is 6.0 pCi/L and we're thinking of selling rather than mitigating. Is that the right decision?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "rescued-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-family-worry-questions-recovered-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-family-worry-questions-recovered", "category": "rescued-health-family-worry-questions-recovered", "subtopic": "Rescued Health Family Worry Questions Recovered", "question": "We found out radon is 5.5 pCi/L in the basement after buying our house. We feel deceived. What are our options?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "rescued-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-family-worry-questions-recovered-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-family-worry-questions-recovered", "category": "rescued-health-family-worry-questions-recovered", "subtopic": "Rescued Health Family Worry Questions Recovered", "question": "My wife is afraid that telling friends our radon is elevated will make our house harder to sell someday. Is she right?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "rescued-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-family-worry-questions-recovered-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-family-worry-questions-recovered", "category": "rescued-health-family-worry-questions-recovered", "subtopic": "Rescued Health Family Worry Questions Recovered", "question": "My radon is 6.0 pCi/L. My neighbor thinks we should all sue the builder because they didn't disclose radon potential. Is that realistic?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/HEALTH-FAMILY-WORRY-QUESTIONS-RECOVERED.md", "public": true, "tags": [ "rescued-health-family-worry-questions-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-monitor-question-bank-recovered-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-monitor-question-bank-recovered", "category": "rescued-monitor-question-bank-recovered", "subtopic": "Rescued Monitor Question Bank Recovered", "question": "Does a consumer monitor reading have any standing in a property disclosure dispute?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "rescued-monitor-question-bank-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-monitor-question-bank-recovered-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-monitor-question-bank-recovered", "category": "rescued-monitor-question-bank-recovered", "subtopic": "Rescued Monitor Question Bank Recovered", "question": "My seller's disclosure says \"no known radon issues.\" But I found an Airthings left in the basement reading 4.3. What do I do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "rescued-monitor-question-bank-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-monitor-question-bank-recovered-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-monitor-question-bank-recovered", "category": "rescued-monitor-question-bank-recovered", "subtopic": "Rescued Monitor Question Bank Recovered", "question": "The estate real-estate professional says the house needs a radon test as part of probate. What kind of test?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "rescued-monitor-question-bank-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-monitor-question-bank-recovered-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-monitor-question-bank-recovered", "category": "rescued-monitor-question-bank-recovered", "subtopic": "Rescued Monitor Question Bank Recovered", "question": "I'm selling a house that has never had a radon test. Do I have to disclose that?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "rescued-monitor-question-bank-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-monitor-question-bank-recovered-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-monitor-question-bank-recovered", "category": "rescued-monitor-question-bank-recovered", "subtopic": "Rescued Monitor Question Bank Recovered", "question": "My real estate real-estate professional says to test for radon after closing to save time. Is that advisable?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/MONITOR-QUESTION-BANK-RECOVERED.md", "public": true, "tags": [ "rescued-monitor-question-bank-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-monitor-sample-answered-qas-recovered-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-monitor-sample-answered-qas-recovered", "category": "rescued-monitor-sample-answered-qas-recovered", "subtopic": "Rescued Monitor Sample Answered Qas Recovered", "question": "Is it better to get two cheap monitors or one expensive one?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/MONITOR-SAMPLE-ANSWERED-QAS-RECOVERED.md", "public": true, "tags": [ "rescued-monitor-sample-answered-qas-recovered", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-phase-3-clean-answered-qas-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-phase-3-clean-answered-qas", "category": "rescued-phase-3-clean-answered-qas", "subtopic": "Rescued Phase 3 Clean Answered Qas", "question": "The seller had mitigation done before listing - the post-mitigation test shows 1.8 pCi/L. Should I believe that result?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "rescued-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-phase-3-clean-answered-qas-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-phase-3-clean-answered-qas", "category": "rescued-phase-3-clean-answered-qas", "subtopic": "Rescued Phase 3 Clean Answered Qas", "question": "My tenant says their consumer monitor shows 4.8 pCi/L in the unit they're renting from me. What are my obligations?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "rescued-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-phase-3-clean-answered-qas-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-phase-3-clean-answered-qas", "category": "rescued-phase-3-clean-answered-qas", "subtopic": "Rescued Phase 3 Clean Answered Qas", "question": "Is radon testing required when selling a house in Illinois?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "rescued-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-phase-3-clean-answered-qas-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-phase-3-clean-answered-qas", "category": "rescued-phase-3-clean-answered-qas", "subtopic": "Rescued Phase 3 Clean Answered Qas", "question": "How do I find a licensed radon tester in Illinois?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "rescued-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-phase-3-clean-answered-qas-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-phase-3-clean-answered-qas", "category": "rescued-phase-3-clean-answered-qas", "subtopic": "Rescued Phase 3 Clean Answered Qas", "question": "Can I use a short-term charcoal canister test for a home I'm selling?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "rescued-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-phase-3-clean-answered-qas-0006", "phase": "phase3", "type": "answered_qna", "topic": "rescued-phase-3-clean-answered-qas", "category": "rescued-phase-3-clean-answered-qas", "subtopic": "Rescued Phase 3 Clean Answered Qas", "question": "The buyer wants me to test AND mitigate before closing. Is that reasonable?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/PHASE-3-CLEAN-ANSWERED-QAS.md", "public": true, "tags": [ "rescued-phase-3-clean-answered-qas", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-phase-3-clean-question-bank-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-phase-3-clean-question-bank", "category": "rescued-phase-3-clean-question-bank", "subtopic": "Rescued Phase 3 Clean Question Bank", "question": "As a seller, do I have to disclose a previous high radon test?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "rescued-phase-3-clean-question-bank", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-phase-3-clean-question-bank-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-phase-3-clean-question-bank", "category": "rescued-phase-3-clean-question-bank", "subtopic": "Rescued Phase 3 Clean Question Bank", "question": "My house tested high when I bought it. Do I have to disclose that to my future buyer?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "rescued-phase-3-clean-question-bank", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-phase-3-clean-question-bank-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-phase-3-clean-question-bank", "category": "rescued-phase-3-clean-question-bank", "subtopic": "Rescued Phase 3 Clean Question Bank", "question": "What is Illinois's disclosure requirement for radon in home sales?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "rescued-phase-3-clean-question-bank", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-phase-3-clean-question-bank-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-phase-3-clean-question-bank", "category": "rescued-phase-3-clean-question-bank", "subtopic": "Rescued Phase 3 Clean Question Bank", "question": "My lease doesn't mention radon at all. Is the landlord required to disclose radon issues in Illinois?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/PHASE-3-CLEAN-QUESTION-BANK.md", "public": true, "tags": [ "rescued-phase-3-clean-question-bank", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "My radon system doesn't seem to have a manometer. Is that normal?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "Illinois requires a post-mitigation test. Who performs it - the same contractor or someone else?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "Do I need to disclose my radon mitigation system when I sell my house?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "My mitigation contractor is no longer in business. Who can I contact about my system?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "My contractor said the U-tube manometer is \"a nice to have but not required.\" Is that accurate?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0006", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "My radon system was installed in 2015. Illinois has updated its guidelines since then. Does my system need to be brought up to current standards?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0007", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "My radon system was installed in a house I'm renting out. As the landlord, what am I responsible for?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0008", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "My post-mitigation test result is missing from the house disclosure form the seller gave me. Should I be worried?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0009", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "How do I know if my mitigation system was installed by a licensed contractor?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0010", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "What should I do if my mitigation contractor is unresponsive after installation and my results aren't good?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0011", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "My realtor said I don't have to disclose my old radon test results because they're from before the mitigation. Is that right?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0012", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "I'm buying a house where the disclosure says radon was \"mitigated.\" There are no test results provided. What should I do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0013", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "The house I'm buying has a mitigation system and the seller's disclosure says 0.9 pCi/L from 3 years ago. Is that good enough or should I retest?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0014", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "Can I work through the next step a lower price on a house because it has radon mitigation?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0015", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "I'm moving out of my mitigated house and feel guilty not telling the buyers exactly what the radon level was before I put in the system. What am I obligated to disclose?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0016", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "The home I'm buying has a mitigation system and recent low test results, but the inspection found the fan is 14 years old. Should I work through the next step for a new fan?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-after-mitigation-monitoring-0017", "phase": "phase3", "type": "answered_qna", "topic": "rescued-after-mitigation-monitoring", "category": "rescued-after-mitigation-monitoring", "subtopic": "Rescued After Mitigation Monitoring", "question": "I've heard that IL requires testing. What exactly does Illinois require for radon mitigation?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/after-mitigation-monitoring.md", "public": true, "tags": [ "rescued-after-mitigation-monitoring", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-airthings-specific-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-airthings-specific", "category": "rescued-airthings-specific", "subtopic": "Rescued Airthings Specific", "question": "Can I use the Airthings as a continuous radon monitor for a rental property?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/airthings-specific.md", "public": true, "tags": [ "rescued-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-airthings-specific-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-airthings-specific", "category": "rescued-airthings-specific", "subtopic": "Rescued Airthings Specific", "question": "The home inspector mentioned the Airthings reading was 3.8 pCi/L. Should the sellers fix it before closing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/airthings-specific.md", "public": true, "tags": [ "rescued-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-airthings-specific-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-airthings-specific", "category": "rescued-airthings-specific", "subtopic": "Rescued Airthings Specific", "question": "The house I'm buying has an Airthings showing a long-term reading of 5.7 pCi/L. Should I walk away?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/airthings-specific.md", "public": true, "tags": [ "rescued-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-airthings-specific-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-airthings-specific", "category": "rescued-airthings-specific", "subtopic": "Rescued Airthings Specific", "question": "Can I use an Airthings reading as a bargaining tool when buying a house?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/airthings-specific.md", "public": true, "tags": [ "rescued-airthings-specific", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My neighbor's house is for sale and they disclosed radon of 5.6. I'm considering buying it. Should that be a dealbreaker?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My friend found out her apartment has elevated radon. Can she do anything as a renter?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My landlord says radon isn't his problem. Is that right?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My roommate found out our apartment has radon at 5.5. The landlord isn't responding. What do we do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My neighbor is a landlord and his rental had radon of 6.8. He asked me if it really matters since \"renters come and go.\" How do I respond to that?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0006", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My friend's husband is telling her they need to sell their house because it has radon of 6.8. Is that the right move?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0007", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My neighbor is selling her house and found out it has radon at 5.6 during the buyer's inspection. She says she'll just disclose it and not fix it. Is that a good strategy?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0008", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My aunt and uncle are arguing about whether their 6.1 pCi/L radon is a reason to sell their house or fix it. What would you tell them?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0009", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My uncle's finished basement has a radon level of 7.0 and he uses it as an AirBnB. Should he be disclosing that to guests?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0010", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My friend is a first-time homebuyer and asked me what to look for with radon. What's the quick summary?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0011", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My friend is about to sign a lease for a basement apartment. Should she ask about radon before signing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0012", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My dad asked me if a radon test needs to be done by a professional or if he can do it himself.", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-family-neighbor-scenarios-0013", "phase": "phase3", "type": "answered_qna", "topic": "rescued-family-neighbor-scenarios", "category": "rescued-family-neighbor-scenarios", "subtopic": "Rescued Family Neighbor Scenarios", "question": "My sister found out the house she's renting was tested years ago and the result was 4.6. There's no mitigation system. She's been there 18 months. What should she tell her landlord?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/family-neighbor-scenarios.md", "public": true, "tags": [ "rescued-family-neighbor-scenarios", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-worry-general-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-worry-general", "category": "rescued-health-worry-general", "subtopic": "Rescued Health Worry General", "question": "I bought a house that had high radon and wasn't disclosed. I've lived there 3 years. What do I do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/health-worry-general.md", "public": true, "tags": [ "rescued-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-worry-general-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-worry-general", "category": "rescued-health-worry-general", "subtopic": "Rescued Health Worry General", "question": "Does radon affect property values?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/health-worry-general.md", "public": true, "tags": [ "rescued-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-worry-general-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-worry-general", "category": "rescued-health-worry-general", "subtopic": "Rescued Health Worry General", "question": "We're renting. The apartment has radon at 5 pCi/L. What can we do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/health-worry-general.md", "public": true, "tags": [ "rescued-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-worry-general-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-worry-general", "category": "rescued-health-worry-general", "subtopic": "Rescued Health Worry General", "question": "My realtor told me not to test for radon because it would lower my home's value. Is that advice I should follow?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/health-worry-general.md", "public": true, "tags": [ "rescued-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-worry-general-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-worry-general", "category": "rescued-health-worry-general", "subtopic": "Rescued Health Worry General", "question": "Does my landlord have to fix radon in my rental?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/health-worry-general.md", "public": true, "tags": [ "rescued-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-worry-general-0006", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-worry-general", "category": "rescued-health-worry-general", "subtopic": "Rescued Health Worry General", "question": "I tested my apartment and got 5 pCi/L. My landlord says it's not their problem. What do I do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/health-worry-general.md", "public": true, "tags": [ "rescued-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-worry-general-0007", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-worry-general", "category": "rescued-health-worry-general", "subtopic": "Rescued Health Worry General", "question": "Can I ask my landlord to test for radon before I sign a lease?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/health-worry-general.md", "public": true, "tags": [ "rescued-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-worry-general-0008", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-worry-general", "category": "rescued-health-worry-general", "subtopic": "Rescued Health Worry General", "question": "We're moving in 3 months. Is it worth fixing radon in our current home or should I just make sure the new place is low?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/health-worry-general.md", "public": true, "tags": [ "rescued-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-health-worry-general-0009", "phase": "phase3", "type": "answered_qna", "topic": "rescued-health-worry-general", "category": "rescued-health-worry-general", "subtopic": "Rescued Health Worry General", "question": "Should every state require radon testing for home sales?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/health-worry-general.md", "public": true, "tags": [ "rescued-health-worry-general", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Is radon testing required when selling a home in Illinois?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does Illinois rule require radon testing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Is there a radon disclosure requirement in Illinois?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Who can legally perform a radon test in Illinois?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does Illinois require a licensed radon tester for real estate transactions?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0006", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "What is an Illinois radon measurement license?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0007", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "How do I find an Illinois-licensed radon measurement professional?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0008", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does Illinois have a state radon program?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0009", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Where does Illinois radon testing data come from?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0010", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Are there county-level radon maps for Illinois?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0011", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does Illinois require landlords to test for radon in rental properties?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0012", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Is my Illinois landlord required to disclose radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0013", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I'm a tenant in Illinois and my Airthings shows high radon. What are my options?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0014", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Can I break a lease in Illinois because of radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0015", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Is radon covered under Illinois habitability rule?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0016", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "My landlord in Illinois says radon isn't their problem. Is that true?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0017", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Can I ask my Illinois landlord to install a radon mitigation system?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0018", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I'm renting a condo in Illinois and the radon test came back high. Who is responsible?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0019", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "How does the Illinois radon licensing system work?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0020", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "How do I verify that a radon professional is licensed in Illinois?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0021", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Are radon mitigation contractors in Illinois required to be licensed?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0022", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "What training do Illinois radon testers have to complete?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0023", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does Illinois recognize radon certifications from national programs like NRPP or NRSB?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0024", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I got a flyer from a company offering a free radon test in Illinois. Should I trust it?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0025", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does Illinois have a radon hotline?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0026", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Are free radon test kits available in Illinois?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0027", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does the Illinois Department of Public Health offer radon resources?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0028", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does Illinois participate in any national radon programs?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0029", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Where can I get official radon information for Illinois?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0030", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does Illinois track radon test data statewide?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0031", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does Illinois have any programs to help low-income homeowners address radon?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0032", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Is there a radon awareness month in Illinois?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0033", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does Illinois have any radon-in-schools programs?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0034", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "What happens if a radon test during an Illinois home sale comes back high?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0035", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I'm selling my house in Illinois. Do I need to fix the radon before listing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0036", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I'm buying a house in Illinois and the radon test came back at 3.8 pCi/L. Is that good enough or should I ask for mitigation?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0037", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "What do I do with my Illinois radon test report after closing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0038", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "In Illinois, who orders the radon test during a real estate deal - the buyer or the seller?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0039", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "What type of radon test is required in Illinois real estate deals?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0040", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Where in the house does the radon test get placed during an Illinois real estate transaction?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0041", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I've heard radon is higher in winter in Illinois. Is that true?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0042", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Can a seller in Illinois refuse to let a buyer do a radon test?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0043", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I'm selling my Illinois home with a radon system already installed. Do I need to disclose this?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0044", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I'm doing a For Sale By Owner in Illinois. Do I still have to follow radon disclosure rules?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0045", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Can I work through the next step with the seller in Illinois to install a radon system before I buy?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0046", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I'm renting out a unit in my Illinois two-flat. Do I need to deal with radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0047", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "My kid's school in Illinois - should I worry about radon there?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0048", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Are Illinois schools required to test for radon?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0049", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I work in an office building in Illinois. Can I ask my employer to test for radon?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0050", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Can radon be a problem in Illinois businesses located in basements?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0051", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "What is the Illinois Radon Awareness Act?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0052", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "If I fix radon in my Illinois home before listing, do I still have to disclose it?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0053", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Can a seller in Illinois be sued for not disclosing radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0054", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does a radon system on my Illinois home need to be disclosed on the MLS listing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0055", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "If I sell my Illinois home and the buyer later finds high radon, can I be held responsible?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0056", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "My Illinois real estate agent mentioned a radon contingency. What does that mean?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0057", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I'm a first-time buyer in Illinois and the inspection report shows radon at 5.8 pCi/L. What do I do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0058", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "As a first-time buyer in Illinois, how do I find a licensed radon inspector who isn't connected to the mitigation company?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0059", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "My Illinois lender mentioned radon. Do banks care about radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0060", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I travel a lot and I'm barely home in my Illinois house. Do I still need to worry about radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0061", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "My Illinois townhome association says radon is not their responsibility. What are my options?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0062", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Does Illinois provide radon testing for veterans or active military?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0063", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "I'm a landlord in Illinois and my tenant sent me a photo of an Airthings reading showing 6.2 pCi/L. What should I do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-illinois-specific-testing-0064", "phase": "phase3", "type": "answered_qna", "topic": "rescued-illinois-specific-testing", "category": "rescued-illinois-specific-testing", "subtopic": "Rescued Illinois Specific Testing", "question": "Where can I learn more about Illinois radon rules and find a licensed professional?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/illinois-specific-testing.md", "public": true, "tags": [ "rescued-illinois-specific-testing", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-kids-baby-pregnancy-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-kids-baby-pregnancy", "category": "rescued-kids-baby-pregnancy", "subtopic": "Rescued Kids Baby Pregnancy", "question": "The nursery was in the basement for 8 months before we tested. Came back at 4.8 pCi/L. What should I tell the pediatrician?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "rescued-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-kids-baby-pregnancy-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-kids-baby-pregnancy", "category": "rescued-kids-baby-pregnancy", "subtopic": "Rescued Kids Baby Pregnancy", "question": "We're about to list our home but realized the basement nursery may have had elevated radon for years while our kids were young. Should I disclose this?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "rescued-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-kids-baby-pregnancy-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-kids-baby-pregnancy", "category": "rescued-kids-baby-pregnancy", "subtopic": "Rescued Kids Baby Pregnancy", "question": "My ex-wife has the kids half the time in a house that tested at 5.5 pCi/L. She refuses to fix it. What can I do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "rescued-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-kids-baby-pregnancy-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-kids-baby-pregnancy", "category": "rescued-kids-baby-pregnancy", "subtopic": "Rescued Kids Baby Pregnancy", "question": "My brother has a baby and won't test for radon. He thinks it's not worth the a small amount for a kit. How do I convince him?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "rescued-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-kids-baby-pregnancy-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-kids-baby-pregnancy", "category": "rescued-kids-baby-pregnancy", "subtopic": "Rescued Kids Baby Pregnancy", "question": "Can I ask my realtor to work through the next step for radon mitigation before we close on a house where my kids will be living?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "rescued-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-kids-baby-pregnancy-0006", "phase": "phase3", "type": "answered_qna", "topic": "rescued-kids-baby-pregnancy", "category": "rescued-kids-baby-pregnancy", "subtopic": "Rescued Kids Baby Pregnancy", "question": "My daughter spends weekends at her dad's house. He has 5.3 pCi/L radon and refuses to fix it. My daughter has asthma. What do I do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "rescued-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-kids-baby-pregnancy-0007", "phase": "phase3", "type": "answered_qna", "topic": "rescued-kids-baby-pregnancy", "category": "rescued-kids-baby-pregnancy", "subtopic": "Rescued Kids Baby Pregnancy", "question": "We just bought our first house and found out it has 5.1 pCi/L radon. I'm three months pregnant. The sellers didn't disclose this. What are my options?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/kids-baby-pregnancy.md", "public": true, "tags": [ "rescued-kids-baby-pregnancy", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-monitor-comparisons-buying-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-monitor-comparisons-buying", "category": "rescued-monitor-comparisons-buying", "subtopic": "Rescued Monitor Comparisons Buying", "question": "My mitigation contractor said to check my Airthings in a week - is that a valid way to confirm it worked?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "rescued-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-monitor-comparisons-buying-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-monitor-comparisons-buying", "category": "rescued-monitor-comparisons-buying", "subtopic": "Rescued Monitor Comparisons Buying", "question": "I'm a landlord - should I put radon monitors in all my rental units?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "rescued-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-monitor-comparisons-buying-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-monitor-comparisons-buying", "category": "rescued-monitor-comparisons-buying", "subtopic": "Rescued Monitor Comparisons Buying", "question": "Do I need to report my radon monitor readings to anyone?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "rescued-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-monitor-comparisons-buying-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-monitor-comparisons-buying", "category": "rescued-monitor-comparisons-buying", "subtopic": "Rescued Monitor Comparisons Buying", "question": "My landlord refuses to test for radon. Can I just buy my own monitor?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/monitor-comparisons-buying.md", "public": true, "tags": [ "rescued-monitor-comparisons-buying", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-new-construction-rrnc-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-new-construction-rrnc", "category": "rescued-new-construction-rrnc", "subtopic": "Rescued New Construction Rrnc", "question": "Can I work through the next step with the builder to install a radon system if tests come back high?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "rescued-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-new-construction-rrnc-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-new-construction-rrnc", "category": "rescued-new-construction-rrnc", "subtopic": "Rescued New Construction Rrnc", "question": "We're buying a new construction home and the builder's test came back at 3.8 pCi/L. Should we work through the next step a mitigation system?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "rescued-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-new-construction-rrnc-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-new-construction-rrnc", "category": "rescued-new-construction-rrnc", "subtopic": "Rescued New Construction Rrnc", "question": "My new home builder said radon testing is \"optional\" for new construction. Is that true?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "rescued-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-new-construction-rrnc-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-new-construction-rrnc", "category": "rescued-new-construction-rrnc", "subtopic": "Rescued New Construction Rrnc", "question": "We just bought a new construction home and the disclosure said \"radon features installed.\" But I can't find the pipe anywhere. What do I check?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "rescued-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-new-construction-rrnc-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-new-construction-rrnc", "category": "rescued-new-construction-rrnc", "subtopic": "Rescued New Construction Rrnc", "question": "I'm building a spec home to sell. Should I include RRNC even if I don't know who the buyer will be?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "rescued-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-new-construction-rrnc-0006", "phase": "phase3", "type": "answered_qna", "topic": "rescued-new-construction-rrnc", "category": "rescued-new-construction-rrnc", "subtopic": "Rescued New Construction Rrnc", "question": "What is the best permanent solution for radon in a new construction home?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "rescued-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-new-construction-rrnc-0007", "phase": "phase3", "type": "answered_qna", "topic": "rescued-new-construction-rrnc", "category": "rescued-new-construction-rrnc", "subtopic": "Rescued New Construction Rrnc", "question": "What should be in a builder's radon disclosure for a new construction home?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "rescued-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-new-construction-rrnc-0008", "phase": "phase3", "type": "answered_qna", "topic": "rescued-new-construction-rrnc", "category": "rescued-new-construction-rrnc", "subtopic": "Rescued New Construction Rrnc", "question": "We're under contract on a new home and just found out the subdivision has had radon issues in past phases. What should we do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "rescued-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-new-construction-rrnc-0009", "phase": "phase3", "type": "answered_qna", "topic": "rescued-new-construction-rrnc", "category": "rescued-new-construction-rrnc", "subtopic": "Rescued New Construction Rrnc", "question": "We have an active RRNC system and our monitor shows 0.4 pCi/L consistently. Do I still need to test with a licensed test?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "rescued-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-new-construction-rrnc-0010", "phase": "phase3", "type": "answered_qna", "topic": "rescued-new-construction-rrnc", "category": "rescued-new-construction-rrnc", "subtopic": "Rescued New Construction Rrnc", "question": "We're converting our barn into a full-time vacation rental. The concrete floor is original to the barn. Do vacation renters need to know about radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "rescued-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-new-construction-rrnc-0011", "phase": "phase3", "type": "answered_qna", "topic": "rescued-new-construction-rrnc", "category": "rescued-new-construction-rrnc", "subtopic": "Rescued New Construction Rrnc", "question": "My new home builder included a radon test as part of the pre-closing walk-through. The result was 3.9 pCi/L. What should I ask for?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/new-construction-rrnc.md", "public": true, "tags": [ "rescued-new-construction-rrnc", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-oddball-rambling-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-oddball-rambling", "category": "rescued-oddball-rambling", "subtopic": "Rescued Oddball Rambling", "question": "My studio is a basement apartment under my landlord's house. Who's responsible for testing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/oddball-rambling.md", "public": true, "tags": [ "rescued-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-oddball-rambling-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-oddball-rambling", "category": "rescued-oddball-rambling", "subtopic": "Rescued Oddball Rambling", "question": "I'm selling my house and the buyer is asking me to fix the radon before closing. My reading was 4.2. Do I have to?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/oddball-rambling.md", "public": true, "tags": [ "rescued-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-oddball-rambling-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-oddball-rambling", "category": "rescued-oddball-rambling", "subtopic": "Rescued Oddball Rambling", "question": "I'm renting and my landlord refuses to test for radon. What do I do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/oddball-rambling.md", "public": true, "tags": [ "rescued-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-oddball-rambling-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-oddball-rambling", "category": "rescued-oddball-rambling", "subtopic": "Rescued Oddball Rambling", "question": "My dad bought a \"radon detector\" at a garage sale for a small amount and says that's good enough. Is it?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/oddball-rambling.md", "public": true, "tags": [ "rescued-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-oddball-rambling-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-oddball-rambling", "category": "rescued-oddball-rambling", "subtopic": "Rescued Oddball Rambling", "question": "Can I sue someone for my radon problem?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/oddball-rambling.md", "public": true, "tags": [ "rescued-oddball-rambling", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-placement-crawlspace-slab-apartment-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-placement-crawlspace-slab-apartment", "category": "rescued-placement-crawlspace-slab-apartment", "subtopic": "Rescued Placement Crawlspace Slab Apartment", "question": "I'm renting a basement apartment. Radon is 5.3 pCi/L. Is that normal for a basement unit?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "rescued-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-placement-crawlspace-slab-apartment-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-placement-crawlspace-slab-apartment", "category": "rescued-placement-crawlspace-slab-apartment", "subtopic": "Rescued Placement Crawlspace Slab Apartment", "question": "I'm renting a basement apartment with high radon. What can I actually do about it?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "rescued-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-placement-crawlspace-slab-apartment-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-placement-crawlspace-slab-apartment", "category": "rescued-placement-crawlspace-slab-apartment", "subtopic": "Rescued Placement Crawlspace Slab Apartment", "question": "I own the ground-floor unit in a condo building. Is the building's HOA responsible for radon mitigation if it's elevated?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "rescued-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-placement-crawlspace-slab-apartment-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-placement-crawlspace-slab-apartment", "category": "rescued-placement-crawlspace-slab-apartment", "subtopic": "Rescued Placement Crawlspace Slab Apartment", "question": "I live in Minnesota. Is radon a bigger issue here than elsewhere?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "rescued-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-placement-crawlspace-slab-apartment-0006", "phase": "phase3", "type": "answered_qna", "topic": "rescued-placement-crawlspace-slab-apartment", "category": "rescued-placement-crawlspace-slab-apartment", "subtopic": "Rescued Placement Crawlspace Slab Apartment", "question": "The buyers of my house want a radon test re-done because the first one was 4.1. Should I work through the next step or just get it fixed?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "rescued-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-placement-crawlspace-slab-apartment-0007", "phase": "phase3", "type": "answered_qna", "topic": "rescued-placement-crawlspace-slab-apartment", "category": "rescued-placement-crawlspace-slab-apartment", "subtopic": "Rescued Placement Crawlspace Slab Apartment", "question": "I'm buying a house and the radon test was 3.7 pCi/L. Should I work through the next step mitigation into the deal?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "rescued-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-placement-crawlspace-slab-apartment-0008", "phase": "phase3", "type": "answered_qna", "topic": "rescued-placement-crawlspace-slab-apartment", "category": "rescued-placement-crawlspace-slab-apartment", "subtopic": "Rescued Placement Crawlspace Slab Apartment", "question": "I'm a landlord renting out a basement unit. Do I have a paperwork obligation to address radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "rescued-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-placement-crawlspace-slab-apartment-0009", "phase": "phase3", "type": "answered_qna", "topic": "rescued-placement-crawlspace-slab-apartment", "category": "rescued-placement-crawlspace-slab-apartment", "subtopic": "Rescued Placement Crawlspace Slab Apartment", "question": "I found out the house I rented for the last 5 years had 8 pCi/L radon the whole time. Can I do anything?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/placement-crawlspace-slab-apartment.md", "public": true, "tags": [ "rescued-placement-crawlspace-slab-apartment", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-radoneye-ecosense-safetysiren-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-radoneye-ecosense-safetysiren", "category": "rescued-radoneye-ecosense-safetysiren", "subtopic": "Rescued Radoneye Ecosense Safetysiren", "question": "Can I use the RadonEye data in a real estate disclosure?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "rescued-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-radoneye-ecosense-safetysiren-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-radoneye-ecosense-safetysiren", "category": "rescued-radoneye-ecosense-safetysiren", "subtopic": "Rescued Radoneye Ecosense Safetysiren", "question": "Can I use RadonEye data to work through the next step with a seller if the level is high?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "rescued-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-radoneye-ecosense-safetysiren-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-radoneye-ecosense-safetysiren", "category": "rescued-radoneye-ecosense-safetysiren", "subtopic": "Rescued Radoneye Ecosense Safetysiren", "question": "Is radon testing required when selling a house?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "rescued-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-radoneye-ecosense-safetysiren-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-radoneye-ecosense-safetysiren", "category": "rescued-radoneye-ecosense-safetysiren", "subtopic": "Rescued Radoneye Ecosense Safetysiren", "question": "I'm a landlord - am I required to provide radon monitoring to tenants?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "rescued-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-radoneye-ecosense-safetysiren-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-radoneye-ecosense-safetysiren", "category": "rescued-radoneye-ecosense-safetysiren", "subtopic": "Rescued Radoneye Ecosense Safetysiren", "question": "I lent my RadonEye to a friend - will the new data mix with my history?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "rescued-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-radoneye-ecosense-safetysiren-0006", "phase": "phase3", "type": "answered_qna", "topic": "rescued-radoneye-ecosense-safetysiren", "category": "rescued-radoneye-ecosense-safetysiren", "subtopic": "Rescued Radoneye Ecosense Safetysiren", "question": "I'm selling my house - should I disclose the mitigation system?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/radoneye-ecosense-safetysiren.md", "public": true, "tags": [ "rescued-radoneye-ecosense-safetysiren", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-readings-spikes-interpretation-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-readings-spikes-interpretation", "category": "rescued-readings-spikes-interpretation", "subtopic": "Rescued Readings Spikes Interpretation", "question": "My radon is 3.9. We're selling in 6 months. Should I mitigate now?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "rescued-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-readings-spikes-interpretation-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-readings-spikes-interpretation", "category": "rescued-readings-spikes-interpretation", "subtopic": "Rescued Readings Spikes Interpretation", "question": "My house was built in 1920. Does an old house have more radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "rescued-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-readings-spikes-interpretation-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-readings-spikes-interpretation", "category": "rescued-readings-spikes-interpretation", "subtopic": "Rescued Readings Spikes Interpretation", "question": "Is radon testing required by rule in Illinois?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "rescued-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-readings-spikes-interpretation-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-readings-spikes-interpretation", "category": "rescued-readings-spikes-interpretation", "subtopic": "Rescued Readings Spikes Interpretation", "question": "My radon test for home purchase came back at 3.7. The seller says that's under 4.0 and nothing needs to be done. Are they right?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/readings-spikes-interpretation.md", "public": true, "tags": [ "rescued-readings-spikes-interpretation", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My inspector found radon at 3.9. Should I ask the seller to mitigate?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "Can I use an Airthings as my real estate radon test in Illinois?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My agent says the seller won't work through the next step on radon mitigation. What can I do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "If I have radon fixed after closing, will it affect my home value?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The test at the house I'm buying came back at 6.2. That seems really high. Is this house ruined?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0006", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "How do I know if the radon test was done correctly? My agent just handed me a number on a sheet.", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0007", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "At what radon level should a buyer actually walk away from a deal?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0008", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The seller is offering a a small amount repair allowance for radon instead of mitigating. Is that enough?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0009", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My realtor is telling me to just move forward and test after closing. Is that okay?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0010", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "If I ask for radon mitigation in my offer and the seller says no, can I still back out?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0011", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My home inspector says they do radon testing too. Is that fine or should I get a separate company?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0012", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The house I'm buying has both a finished basement and an unfinished crawl space under an addition. How do I test that?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0013", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "Is radon testing required to buy a house in Illinois?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0014", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "Does Illinois require sellers to disclose radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0015", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "What part of Illinois has the highest radon levels?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0016", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My realtor says Illinois requires a radon test at every sale. Is that true?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0017", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "Is the Illinois radon program the agency I should look to for radon guidance in Illinois?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0018", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "I heard Illinois has special rules for radon testing protocols. What's different from other states?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0019", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "Does Illinois have a state radon program that helps homeowners with mitigation costs?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0020", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "How soon before closing does the radon test need to be done?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0021", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My agent says we can do a radon test after our offer is accepted. When exactly should we schedule it?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0022", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The seller claims they have a continuous monitor that has shown readings below 2.0 for the past year. Is that good enough?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0023", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The house we tested had a result of exactly 4.0. Do we need mitigation or not?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0024", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "How do I know if the radon tester is actually licensed?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0025", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "Is an online radon certification from any old website legitimate in Illinois?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0026", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My agent told me if I ask for radon mitigation I'll lose the house in this competitive market. Is that true?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0027", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My agent says the seller won't disclose anything about radon because they never tested. Is that okay?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0028", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "I want to sell my house in a few years. If I mitigate now, do I need to disclose that?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0029", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My real-estate professional says I should include a radon contingency in my offer. What does that mean exactly?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0030", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "Can I work through the next step a lower purchase price because of radon instead of asking for mitigation?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0031", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "What happens if the seller mitigates and the post-mitigation test is still elevated?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0032", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "Can I make the post-mitigation test a condition of closing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0033", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My real-estate professional says radon isn't addressed in the purchase contract. Should I add it?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0034", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The seller says they'll escrow money for radon mitigation after closing. Should I accept that?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0035", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The seller reduced the price by a small amount for radon. Is that enough?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0036", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "What if radon comes up after my inspection period is over but before closing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0037", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "Can Airthings be used for real estate transactions in Illinois?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0038", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My inspector wants to use a continuous monitor for the radon test. Is that legitimate?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0039", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The inspector says they'll do the radon test with an electronic monitor but I've only heard of charcoal canisters. Should I be worried?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0040", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "Can I work through the next step on the price of radon mitigation or is it pretty fixed?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0041", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The disclosure says the home has never had radon above 4.0 pCi/L. Does that mean the current level is fine?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0042", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My buyer's agent said they've never seen a radon issue in this price range of homes. Is that a real thing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0043", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "We're in a hot market and I made an offer without an inspection contingency. Can I still test for radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0044", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "I'm a veteran using a VA-backed purchase to buy a house that tested at 5.0 pCi/L. Does the VA have radon requirements?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-rescued-real-estate-buyer-0045", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "I'm buying a house as an investment to rent out. Do my tenants have a right to know about radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0046", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "Is there a radon rating system for houses like there is for energy efficiency?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0047", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The sellers did a radon test with a liquid scintillation detector. What is that?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0048", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The seller has a radon mitigation installation record on file. Is that a good sign?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0049", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My agent told me radon testing isn't common in this part of Illinois. Should I still test?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0050", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The house we're buying tested at 11 pCi/L. That seems really scary. Is the house even salvageable?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0051", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "What questions should I ask a radon mitigator when getting a bid?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0052", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "I'm closing in three days. The seller just told me they're mitigating tomorrow. Should I trust that's enough time?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0053", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "I'm buying with a contingency on radon but my agent says we should set the trigger level at 4.0. Is that the right number?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0054", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "What language should I look for in a radon contingency clause?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0055", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "How long do I typically have to conduct a radon test under a standard inspection contingency?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0056", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My real-estate professional wants to add a radon contingency but the seller's real-estate professional is pushing back. Is radon contingency language really that non-standard?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0057", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The contract says if radon exceeds 4.0, seller will mitigate \"to the extent reasonably possible.\" Is that good enough?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0058", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The seller wants me to pay for my own mitigation after closing in exchange for a lower sale price. Is that a reasonable arrangement?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0059", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "What if the seller's mitigation company shows up the day before closing? Can I trust it was done properly?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0060", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My purchase agreement says \"radon test to be completed by buyer at buyer's expense.\" Does that mean the seller won't pay for mitigation if levels are high?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0061", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "I've never bought a house before and I didn't know I was supposed to test for radon until my inspector mentioned it. Is it too late?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0063", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "Can a buyer's radon test result be used by the seller to dispute other issues in the work through the next step?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0064", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "I called three radon mitigation companies for bids on a 4.6 result. One is much cheaper than the others. Should I go with the cheapest?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0065", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My radon test came back 4.0 exactly and the sellers are saying that's not above the limit so they don't have to do anything. Who's right?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0066", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "The seller says the radon system was installed by a \"handyman friend.\" Should I be concerned?", "answer": "Illinois has specific rules for radon measurement and mitigation work, so the safest public answer is to keep this practical. Use properly licensed radon professionals, keep clear records, and rely on a current radon result when deciding what to do next. If the result is elevated or confusing, Bill can explain what mitigation would involve and how a properly installed system should be approached.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0067", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "I'm buying a house with a radon result of 9.0. My parents think I'm crazy. Am I making a mistake?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-buyer-0068", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-buyer", "category": "rescued-real-estate-buyer", "subtopic": "Rescued Real Estate Buyer", "question": "My real estate real-estate professional says a radon mitigation repair allowance is \"standard practice\" but I've never heard of it. Is that true in Illinois?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-buyer.md", "public": true, "tags": [ "rescued-real-estate-buyer", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I'm selling my house and the buyer's radon test came back at 5.2. What do I do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "Buyer's test came back at 6.1. They're asking me to put in a mitigation system before closing. Is that normal?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The buyer's test was at 3.7. They're asking me to mitigate anyway. Do I have to?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The buyer wants the radon system installed but also wants me to pay for their post-mitigation test. Is that standard?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "Do I have to disclose radon if I already fixed it?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0006", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I bought my house 20 years ago. There was never a radon test. I'm selling now and the buyer is asking if I know about radon. What do I say?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0007", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My house has a mitigation system from the previous owner. I never tested after moving in and I'm now selling. What do I disclose?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0008", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The radon test the buyer ordered came back at 4.6. I had no idea the radon was elevated. Am I in trouble?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0009", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I know my basement radon was high - I had it tested two years ago and it was 6.8 - but I never fixed it and I'm now selling. Do I have to tell the buyer?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0010", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The radon result came back at 5.0. My agent is telling me I don't have to do anything because we're in a state that doesn't require radon disclosure. Is that accurate?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0011", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "Do buyers typically ask about radon on the seller's disclosure form?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0012", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I'm selling a house I inherited. There's a mitigation system in the basement. I have no idea when it was installed or what the radon levels were. What do I disclose?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0013", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My real estate real-estate professional says I only have to disclose what's on the disclosure form. The form doesn't ask about radon. So I don't have to say anything?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0014", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "If I installed a mitigation system, does that show up anywhere in public records that a buyer could find?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0015", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "Will a radon mitigation system help me sell my house faster?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0016", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I tested my basement before listing. It came back at 3.1. Do I need to mitigate before listing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0017", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My listing agent says don't test before listing because then I'll have to disclose a bad result. Is that good advice?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0018", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I'm selling my house as-is. Does radon affect an as-is sale?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0019", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I listed as-is and the buyer's test came back at 6.2. Now they want me to either fix it or drop the price a small amount. I thought as-is meant they accepted everything.", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0020", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The radon test came back at 5.5 and the buyer wants to renegotiate the price. I already priced the house low. What's fair?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0021", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I have a signed purchase agreement. The radon test came back high after signing. What happens now?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0022", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The buyer accepted my as-is disclosure and then the radon test came back at 4.1. Now they want to back out. Can they do that?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0023", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I'm selling an older farmhouse. It's a cash sale to an investor. Do I still need to address the radon issue the inspector found?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0024", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "Can I raise rent after installing radon mitigation? I made the property safer.", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0025", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I manage rentals for out-of-state owners. None of the leases mention radon. Should I test?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0026", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I'm selling a small apartment building. The buyer is asking for radon test results for all units. I only have results for two. What do I do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0027", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I manage a condo building. A unit owner is asking about radon in their unit. Who's responsible - the owner or the HOA?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0028", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "How long should I keep radon test records for my rental property?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0029", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "We need the radon issue resolved before the buyer's lender will approve the transaction paperwork. The lender says elevated radon is a problem. Is that a real thing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-rescued-real-estate-seller-landlord-0030", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The radon test wasn't done until day 12 of a 14-day inspection period. Now the buyers only have 2 days to respond. What happens if they don't make a decision in time?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0031", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I'm flipping a house and it tested at 5.5. Should I mitigate before listing or factor it into the listing price?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0032", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The estate I'm managing has a house going to market. We found that the previous owner had a high radon test but never mitigated. What's the estate's responsibility?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0033", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I bought a foreclosure. The house was tested by the bank and radon was 6.8. I'm now selling it. Do I have to disclose their test?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0034", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The buyer wants a 90-day long-term test before they'll close. That's not realistic. What should I say?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0035", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The buyer did their own test AND wants to hire a second radon contractor to inspect my existing mitigation system. Is that overboard?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0036", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My real estate agent mentioned radon and I had no idea what it was. Is it really something I need to worry about as a seller?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0037", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The buyer agreed to take the house as-is, but now they're citing the radon result as a health and safety issue that isn't covered by the as-is agreement. Is that a legitimate argument?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0038", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My seller's disclosure doesn't have a radon section. Should I add a note anyway?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0039", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "Can I ask the buyer to sign a radon waiver to protect myself?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0040", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I already accepted an offer. The radon test is scheduled. Can I do my own test before theirs to have a baseline?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0041", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My radon result was 4.0 exactly. The buyer says it \"failed.\" I say it's right at the limit. Who's right?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0042", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My buyer's lender is now asking for a radon clearance letter before funding the transaction paperwork. Is that something a radon contractor provides?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": true }, { "id": "p3-rescued-real-estate-seller-landlord-0043", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I'm exhausted by this radon work through the next step. What's the fastest way to just get it done and close?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0044", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "A potential buyer asked me to show them the mitigation system before making an offer. Is that normal?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0045", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I live in a state that doesn't have state radon regulations. Does that mean I can ignore this during a sale?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0046", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My closing real-estate professional is asking me to fill out an environmental disclosure form. There's a section on radon. What do I write?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0047", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I own a cabin that I'm selling. It only gets used seasonally. Do I need to test it?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0048", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I'm selling a duplex where the lower unit has a sump and the upper doesn't. Should I test both units?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0049", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I'm in a seller's market and I have multiple offers. One buyer is waiving inspection. Do I still need to disclose radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0050", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "Is it paperwork to not disclose a radon system if the buyer doesn't ask directly?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0051", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My real estate agent told me to remove the radon pipe from the listing photos so buyers don't notice. Is that okay?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0052", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I sold a house two years ago and never mentioned the radon system. The new owners just found it and are upset. Are they going to come after me?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0053", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My tenant's radon test came back at 4.5. Do I have to mitigate or can I offer them a rent reduction instead?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0054", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My tenant wants me to install carbon monoxide detectors AND a radon monitor as a condition of renewing their lease. Is a radon monitor a reasonable ask?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0055", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My parents just died and I'm selling their house. I found a high radon reading from 10 years ago in their files. What do I do with that?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0056", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I inherited a house with an obvious DIY radon \"fix\" - just some pipes vented to a crawl space with no fan. What do I tell buyers?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0057", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The buyer asked for a price reduction because \"the house has a radon problem.\" My system is installed and working. How do I respond?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0058", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "A house two streets over sold for less because of radon. My neighbor told me. Should I be worried?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0059", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I just got an offer well under asking. The buyer's agent cited radon as a reason. My radon test before listing showed 3.2. Is 3.2 a legitimate reason to work through the next step price down?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0060", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "Is it ever okay to test for radon after an offer is accepted instead of before?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0061", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "The buyer accepted my house with the mitigation system, but their lender now says they need a \"radon clearance\" from a state agency. Does that exist?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0062", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "My house sold and closed. Three months later the buyer calls saying the mitigation system isn't working and the radon is back up to 6.0. What's my exposure?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-real-estate-seller-landlord-0063", "phase": "phase3", "type": "answered_qna", "topic": "rescued-real-estate-seller-landlord", "category": "rescued-real-estate-seller-landlord", "subtopic": "Rescued Real Estate Seller Landlord", "question": "I tested my house before listing. Result was 1.4 pCi/L. Do I even need to mention radon in my disclosures?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/real-estate-seller-landlord.md", "public": true, "tags": [ "rescued-real-estate-seller-landlord", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-seasonal-weather-environmental-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-seasonal-weather-environmental", "category": "rescued-seasonal-weather-environmental", "subtopic": "Rescued Seasonal Weather Environmental", "question": "We're renting and the landlord says my monitor reading is wrong because \"radon varies.\" Is that true?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "rescued-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-seasonal-weather-environmental-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-seasonal-weather-environmental", "category": "rescued-seasonal-weather-environmental", "subtopic": "Rescued Seasonal Weather Environmental", "question": "I rent out my basement as an Airbnb. Radon is 4.8 pCi/L. Do I have any obligation to guests?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "rescued-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-seasonal-weather-environmental-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-seasonal-weather-environmental", "category": "rescued-seasonal-weather-environmental", "subtopic": "Rescued Seasonal Weather Environmental", "question": "We have a college student living in our basement apartment. Radon is 5.2 pCi/L. Should we tell them?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "rescued-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-seasonal-weather-environmental-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-seasonal-weather-environmental", "category": "rescued-seasonal-weather-environmental", "subtopic": "Rescued Seasonal Weather Environmental", "question": "Is radon regulated like other air pollutants? Why isn't there a paperwork limit?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "rescued-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-seasonal-weather-environmental-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-seasonal-weather-environmental", "category": "rescued-seasonal-weather-environmental", "subtopic": "Rescued Seasonal Weather Environmental", "question": "My radon is high but I'm planning to sell the house in 6 months. Should I mitigate now or disclose and let the buyer deal with it?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/seasonal-weather-environmental.md", "public": true, "tags": [ "rescued-seasonal-weather-environmental", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0001", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "Is my landlord required to test for radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0002", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "My landlord says radon is my problem as the tenant. Is that right?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0003", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "My lease says nothing about radon. Is that normal?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0004", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "Do renters have any paperwork rights when it comes to radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0005", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "Can I work through the next step radon testing or mitigation into my lease before I sign?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0006", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "Is my landlord legally required to fix radon in my apartment?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0007", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "Can I withhold rent because of high radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0008", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "My landlord installed a radon mitigation system but didn't tell me or give me any info about it. Should they have?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0009", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "My apartment lease says radon testing and mitigation are my responsibility as the tenant. Is that enforceable?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0010", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "My state apparently has a radon disclosure rule. What does that actually require my landlord to do?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0011", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "Can I sue my landlord for not fixing radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0012", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "I'm signing a new lease on a basement unit. Can I put a radon clause in the lease?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0013", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "I'm graduating and moving out in three months. Is it worth pushing my landlord on radon for such a short time?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0014", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "My HOA says they're not responsible for radon in my unit. Is that true?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0015", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "I'm on a condo association board. We found out a ground-floor unit has radon at 5.8. What's our responsibility?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0016", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "I want to break my lease because the radon is high and my landlord won't fix it. Can I do that?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0017", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "I moved into a new apartment and found radon at 7.0 pCi/L within the first week. What are my options?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0018", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "My landlord says they're exempt from radon regulations because they own fewer than 4 rental units. Is that a thing?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0019", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "My landlord says they tested with a professional and my results are confidential. Can they withhold radon test results from me?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0020", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "I'm renting a vacation cabin for a summer-long artist residency. The cabin is in a rural area. Should I test for radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0021", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "Can I work through the next step the cost of radon mitigation off my rent?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0022", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "I'm planning to rent my own home to someone else. Do I need to disclose radon?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0023", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "My lease is about to expire and my landlord offered to extend at the same rent but won't fix the radon (which is 5.1). Should I sign?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0024", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "I've heard that some states require radon disclosure when renting. Which states?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false }, { "id": "p3-rescued-tenant-renter-college-0025", "phase": "phase3", "type": "answered_qna", "topic": "rescued-tenant-renter-college", "category": "rescued-tenant-renter-college", "subtopic": "Rescued Tenant Renter College", "question": "I'm in subsidized housing (not HUD) through a state program. Do I have radon rights?", "answer": "For the radon side, focus on a reliable current reading and a clear mitigation path if the level is elevated. Real-estate paperwork, repair allowances, rental responsibilities, and closing decisions should be handled by the people managing the transaction. Bill can help with the practical radon part: what the number means, whether mitigation makes sense, and what a proper system would involve. If the reading is 4.0 pCi/L or higher, EPA recommends fixing the home. Between 2.0 and 4.0 pCi/L, EPA says to consider mitigation, especially if the space is used often.", "source": "cleaned-master/04-rescued-from-review-cleaned/tenant-renter-college.md", "public": true, "tags": [ "rescued-tenant-renter-college", "phase 3 full package" ], "cleanupChanged": false } ] }